/*
 * Copyright (c) 2024 Nordic Semiconductor ASA
 *
 * SPDX-License-Identifier: Apache-2.0
 */

dppic00: dppic@42000 {
	compatible = "nordic,nrf-dppic";
	reg = <0x42000 0x808>;
	status = "disabled";
};

spi00: spi@4a000 {
	/*
	 * This spi node can be either SPIM or SPIS,
	 * for the user to pick:
	 * compatible = "nordic,nrf-spim" or
	 *              "nordic,nrf-spis".
	 */
	compatible = "nordic,nrf-spim";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0x4a000 0x1000>;
	interrupts = <74 NRF_DEFAULT_IRQ_PRIORITY>;
	max-frequency = <DT_FREQ_M(32)>;
	easydma-maxcnt-bits = <16>;
	status = "disabled";
};

uart00: uart@4a000 {
	compatible = "nordic,nrf-uarte";
	reg = <0x4a000 0x1000>;
	interrupts = <74 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "disabled";
};

gpio2: gpio@50400 {
	compatible = "nordic,nrf-gpio";
	gpio-controller;
	reg = <0x50400 0x300>;
	#gpio-cells = <2>;
	ngpios = <11>;
	status = "disabled";
	port = <2>;
};

timer00: timer@55000 {
	compatible = "nordic,nrf-timer";
	status = "disabled";
	reg = <0x55000 0x1000>;
	cc-num = <6>;
	max-bit-width = <32>;
	interrupts = <85 NRF_DEFAULT_IRQ_PRIORITY>;
	prescaler = <0>;
};

dppic10: dppic@82000 {
	compatible = "nordic,nrf-dppic";
	reg = <0x82000 0x808>;
	status = "disabled";
};

timer10: timer@85000 {
	compatible = "nordic,nrf-timer";
	status = "disabled";
	reg = <0x85000 0x1000>;
	cc-num = <8>;
	max-bit-width = <32>;
	interrupts = <133 NRF_DEFAULT_IRQ_PRIORITY>;
	prescaler = <0>;
};

egu10: egu@87000 {
	compatible = "nordic,nrf-egu";
	reg = <0x87000 0x1000>;
	interrupts = <135 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "disabled";
};

radio: radio@8a000 {
	compatible = "nordic,nrf-radio";
	reg = <0x8a000 0x1000>;
	interrupts = <138 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "disabled";
	dfe-supported;
	ieee802154-supported;
	ble-2mbps-supported;
	ble-coded-phy-supported;

	ieee802154: ieee802154 {
		compatible = "nordic,nrf-ieee802154";
		status = "disabled";
	};
};

dppic20: dppic@c2000 {
	compatible = "nordic,nrf-dppic";
	reg = <0xc2000 0x808>;
	status = "disabled";
};

i2c20: i2c@c6000 {
	compatible = "nordic,nrf-twim";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0xc6000 0x1000>;
	clock-frequency = <I2C_BITRATE_STANDARD>;
	interrupts = <198 NRF_DEFAULT_IRQ_PRIORITY>;
	easydma-maxcnt-bits = <16>;
	status = "disabled";
};

spi20: spi@c6000 {
	/*
	 * This spi node can be either SPIM or SPIS,
	 * for the user to pick:
	 * compatible = "nordic,nrf-spim" or
	 *              "nordic,nrf-spis".
	 */
	compatible = "nordic,nrf-spim";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0xc6000 0x1000>;
	interrupts = <198 NRF_DEFAULT_IRQ_PRIORITY>;
	max-frequency = <DT_FREQ_M(8)>;
	easydma-maxcnt-bits = <16>;
	status = "disabled";
};

uart20: uart@c6000 {
	compatible = "nordic,nrf-uarte";
	reg = <0xc6000 0x1000>;
	interrupts = <198 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "disabled";
};

i2c21: i2c@c7000 {
	compatible = "nordic,nrf-twim";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0xc7000 0x1000>;
	clock-frequency = <I2C_BITRATE_STANDARD>;
	interrupts = <199 NRF_DEFAULT_IRQ_PRIORITY>;
	easydma-maxcnt-bits = <16>;
	status = "disabled";
};

spi21: spi@c7000 {
	/*
	 * This spi node can be either SPIM or SPIS,
	 * for the user to pick:
	 * compatible = "nordic,nrf-spim" or
	 *              "nordic,nrf-spis".
	 */
	compatible = "nordic,nrf-spim";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0xc7000 0x1000>;
	interrupts = <199 NRF_DEFAULT_IRQ_PRIORITY>;
	max-frequency = <DT_FREQ_M(8)>;
	easydma-maxcnt-bits = <16>;
	status = "disabled";
};

uart21: uart@c7000 {
	compatible = "nordic,nrf-uarte";
	reg = <0xc7000 0x1000>;
	interrupts = <199 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "disabled";
};

i2c22: i2c@c8000 {
	compatible = "nordic,nrf-twim";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0xc8000 0x1000>;
	clock-frequency = <I2C_BITRATE_STANDARD>;
	interrupts = <200 NRF_DEFAULT_IRQ_PRIORITY>;
	easydma-maxcnt-bits = <16>;
	status = "disabled";
};

spi22: spi@c8000 {
	/*
	 * This spi node can be either SPIM or SPIS,
	 * for the user to pick:
	 * compatible = "nordic,nrf-spim" or
	 *              "nordic,nrf-spis".
	 */
	compatible = "nordic,nrf-spim";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0xc8000 0x1000>;
	interrupts = <200 NRF_DEFAULT_IRQ_PRIORITY>;
	max-frequency = <DT_FREQ_M(8)>;
	easydma-maxcnt-bits = <16>;
	status = "disabled";
};

uart22: uart@c8000 {
	compatible = "nordic,nrf-uarte";
	reg = <0xc8000 0x1000>;
	interrupts = <200 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "disabled";
};

egu20: egu@c9000 {
	compatible = "nordic,nrf-egu";
	reg = <0xc9000 0x1000>;
	interrupts = <201 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "disabled";
};

timer20: timer@ca000 {
	compatible = "nordic,nrf-timer";
	status = "disabled";
	reg = <0xca000 0x1000>;
	cc-num = <6>;
	max-bit-width = <32>;
	interrupts = <202 NRF_DEFAULT_IRQ_PRIORITY>;
	prescaler = <0>;
};

timer21: timer@cb000 {
	compatible = "nordic,nrf-timer";
	status = "disabled";
	reg = <0xcb000 0x1000>;
	cc-num = <6>;
	max-bit-width = <32>;
	interrupts = <203 NRF_DEFAULT_IRQ_PRIORITY>;
	prescaler = <0>;
};

timer22: timer@cc000 {
	compatible = "nordic,nrf-timer";
	status = "disabled";
	reg = <0xcc000 0x1000>;
	cc-num = <6>;
	max-bit-width = <32>;
	interrupts = <204 NRF_DEFAULT_IRQ_PRIORITY>;
	prescaler = <0>;
};

timer23: timer@cd000 {
	compatible = "nordic,nrf-timer";
	status = "disabled";
	reg = <0xcd000 0x1000>;
	cc-num = <6>;
	max-bit-width = <32>;
	interrupts = <205 NRF_DEFAULT_IRQ_PRIORITY>;
	prescaler = <0>;
};

timer24: timer@ce000 {
	compatible = "nordic,nrf-timer";
	status = "disabled";
	reg = <0xce000 0x1000>;
	cc-num = <6>;
	max-bit-width = <32>;
	interrupts = <206 NRF_DEFAULT_IRQ_PRIORITY>;
	prescaler = <0>;
};

adc: adc@d5000 {
	compatible = "nordic,nrf-saadc";
	reg = <0xd5000 0x1000>;
	interrupts = <213 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "disabled";
	#io-channel-cells = <1>;
};

nfct: nfct@d6000 {
	compatible = "nordic,nrf-nfct";
	reg = <0xd6000 0x1000>;
	interrupts = <214 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "disabled";
};

temp: temp@d7000 {
	compatible = "nordic,nrf-temp";
	reg = <0xd7000 0x1000>;
	interrupts = <215 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "disabled";
};

gpio1: gpio@d8200 {
	compatible = "nordic,nrf-gpio";
	gpio-controller;
	reg = <0xd8200 0x300>;
	#gpio-cells = <2>;
	ngpios = <16>;
	status = "disabled";
	port = <1>;
	gpiote-instance = <&gpiote20>;
};

gpiote20: gpiote@da000 {
	compatible = "nordic,nrf-gpiote";
	reg = <0xda000 0x1000>;
	interrupts = <219 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "disabled";
	instance = <20>;
};

i2s20: i2s@dd000 {
	compatible = "nordic,nrf-i2s";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0xdd000 0x1000>;
	interrupts = <221 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "disabled";
};

qdec20: qdec@e0000 {
	compatible = "nordic,nrf-qdec";
	reg = <0xe0000 0x1000>;
	interrupts = <224 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "disabled";
};

qdec21: qdec@e1000 {
	compatible = "nordic,nrf-qdec";
	reg = <0xe1000 0x1000>;
	interrupts = <225 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "disabled";
};

grtc: grtc@e2000 {
	compatible = "nordic,nrf-grtc";
	reg = <0xe2000 0x1000>;
	cc-num = <12>;
	owned-channels = <0 1 2 3 4 5 6 7 8 9 10 11>;
	interrupts = <228 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "disabled";
};

dppic30: dppic@102000 {
	compatible = "nordic,nrf-dppic";
	reg = <0x102000 0x808>;
	status = "disabled";
};

i2c30: i2c@104000 {
	compatible = "nordic,nrf-twim";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0x104000 0x1000>;
	clock-frequency = <I2C_BITRATE_STANDARD>;
	interrupts = <260 NRF_DEFAULT_IRQ_PRIORITY>;
	easydma-maxcnt-bits = <16>;
	status = "disabled";
};

spi30: spi@104000 {
	/*
	 * This spi node can be either SPIM or SPIS,
	 * for the user to pick:
	 * compatible = "nordic,nrf-spim" or
	 *              "nordic,nrf-spis".
	 */
	compatible = "nordic,nrf-spim";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0x104000 0x1000>;
	interrupts = <260 NRF_DEFAULT_IRQ_PRIORITY>;
	max-frequency = <DT_FREQ_M(8)>;
	easydma-maxcnt-bits = <16>;
	status = "disabled";
};

uart30: uart@104000 {
	compatible = "nordic,nrf-uarte";
	reg = <0x104000 0x1000>;
	interrupts = <260 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "disabled";
};

wdt30: watchdog@108000 {
	compatible = "nordic,nrf-wdt";
	reg = <0x108000 0x620>;
	interrupts = <264 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "disabled";
};

wdt31: watchdog@109000 {
	compatible = "nordic,nrf-wdt";
	reg = <0x109000 0x620>;
	interrupts = <265 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "disabled";
};

gpio0: gpio@10a000 {
	compatible = "nordic,nrf-gpio";
	gpio-controller;
	reg = <0x10a000 0x300>;
	#gpio-cells = <2>;
	ngpios = <5>;
	status = "disabled";
	port = <0>;
	gpiote-instance = <&gpiote30>;
};

gpiote30: gpiote@10c000 {
	compatible = "nordic,nrf-gpiote";
	reg = <0x10c000 0x1000>;
	interrupts = <269 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "disabled";
	instance = <30>;
};

clock: clock@10e000 {
	compatible = "nordic,nrf-clock";
	reg = <0x10e000 0x1000>;
	interrupts = <270 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "disabled";
};