/*
 * Copyright (c) 2018 Nordic Semiconductor ASA
 *
 * SPDX-License-Identifier: Apache-2.0
 */

flash_controller: flash-controller@39000 {
	compatible = "nordic,nrf91-flash-controller";
	reg = <0x39000 0x1000>;
	partial-erase;

	#address-cells = <1>;
	#size-cells = <1>;


	flash0: flash@0 {
		compatible = "soc-nv-flash";
		erase-block-size = <4096>;
		write-block-size = <4>;
	};
};

adc: adc@e000 {
	compatible = "nordic,nrf-saadc";
	reg = <0xe000 0x1000>;
	interrupts = <14 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "disabled";
	#io-channel-cells = <1>;
};

dppic: dppic@17000 {
	compatible = "nordic,nrf-dppic";
	reg = <0x17000 0x1000>;
	status = "okay";
};

egu0: egu@1b000 {
	compatible = "nordic,nrf-egu";
	reg = <0x1b000 0x1000>;
	interrupts = <27 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "okay";
};

egu1: egu@1c000 {
	compatible = "nordic,nrf-egu";
	reg = <0x1c000 0x1000>;
	interrupts = <28 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "okay";
};

egu2: egu@1d000 {
	compatible = "nordic,nrf-egu";
	reg = <0x1d000 0x1000>;
	interrupts = <29 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "okay";
};

egu3: egu@1e000 {
	compatible = "nordic,nrf-egu";
	reg = <0x1e000 0x1000>;
	interrupts = <30 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "okay";
};

egu4: egu@1f000 {
	compatible = "nordic,nrf-egu";
	reg = <0x1f000 0x1000>;
	interrupts = <31 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "okay";
};

egu5: egu@20000 {
	compatible = "nordic,nrf-egu";
	reg = <0x20000 0x1000>;
	interrupts = <32 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "okay";
};

ipc: ipc@2a000 {
	compatible = "nordic,nrf-ipc";
	reg = <0x2a000 0x1000>;
	interrupts = <42 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "okay";
};

i2s0: i2s@28000 {
	compatible = "nordic,nrf-i2s";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0x28000 0x1000>;
	interrupts = <40 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "disabled";
};

kmu: kmu@39000 {
	compatible = "nordic,nrf-kmu";
	reg = <0x39000 0x1000>;
	interrupts = <57 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "okay";
};

pdm0: pdm@26000 {
	compatible = "nordic,nrf-pdm";
	reg = <0x26000 0x1000>;
	interrupts = <38 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "disabled";
};

regulators: regulator@4000 {
	compatible = "nordic,nrf-regulators";
	reg = <0x4000 0x1000>;
	status = "okay";
};

vmc: vmc@3a000 {
	compatible = "nordic,nrf-vmc";
	reg = <0x3a000 0x1000>;
	status = "okay";
};

uart0: uart@8000 {
	compatible = "nordic,nrf-uarte";
	reg = <0x8000 0x1000>;
	interrupts = <8 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "disabled";
};

uart1: uart@9000 {
	compatible = "nordic,nrf-uarte";
	reg = <0x9000 0x1000>;
	interrupts = <9 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "disabled";
};

uart2: uart@a000 {
	compatible = "nordic,nrf-uarte";
	reg = <0xa000 0x1000>;
	interrupts = <10 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "disabled";
};

uart3: uart@b000 {
	compatible = "nordic,nrf-uarte";
	reg = <0xb000 0x1000>;
	interrupts = <11 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "disabled";
};

i2c0: i2c@8000 {
	/*
	 * This i2c node can be either TWIM or TWIS, for the user to pick:
	 * compatible = "nordic,nrf-twim" or
	 *              "nordic,nrf-twis".
	 */
	compatible = "nordic,nrf-twim";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0x8000 0x1000>;
	clock-frequency = <I2C_BITRATE_STANDARD>;
	interrupts = <8 NRF_DEFAULT_IRQ_PRIORITY>;
	easydma-maxcnt-bits = <13>;
	status = "disabled";
};

i2c1: i2c@9000 {
	/*
	 * This i2c node can be either TWIM or TWIS, for the user to pick:
	 * compatible = "nordic,nrf-twim" or
	 *              "nordic,nrf-twis".
	 */
	compatible = "nordic,nrf-twim";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0x9000 0x1000>;
	clock-frequency = <I2C_BITRATE_STANDARD>;
	interrupts = <9 NRF_DEFAULT_IRQ_PRIORITY>;
	easydma-maxcnt-bits = <13>;
	status = "disabled";
};

i2c2: i2c@a000 {
	/*
	 * This i2c node can be either TWIM or TWIS, for the user to pick:
	 * compatible = "nordic,nrf-twim" or
	 *              "nordic,nrf-twis".
	 */
	compatible = "nordic,nrf-twim";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0xa000 0x1000>;
	clock-frequency = <I2C_BITRATE_STANDARD>;
	interrupts = <10 NRF_DEFAULT_IRQ_PRIORITY>;
	easydma-maxcnt-bits = <13>;
	status = "disabled";
};

i2c3: i2c@b000 {
	/*
	 * This i2c node can be either TWIM or TWIS, for the user to pick:
	 * compatible = "nordic,nrf-twim" or
	 *              "nordic,nrf-twis".
	 */
	compatible = "nordic,nrf-twim";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0xb000 0x1000>;
	clock-frequency = <I2C_BITRATE_STANDARD>;
	interrupts = <11 NRF_DEFAULT_IRQ_PRIORITY>;
	easydma-maxcnt-bits = <13>;
	status = "disabled";
};

spi0: spi@8000 {
	/*
	 * This spi node can be either SPIM or SPIS, for the user to pick:
	 * compatible = "nordic,nrf-spim" or
	 *              "nordic,nrf-spis".
	 */
	compatible = "nordic,nrf-spim";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0x8000 0x1000>;
	interrupts = <8 NRF_DEFAULT_IRQ_PRIORITY>;
	max-frequency = <DT_FREQ_M(8)>;
	easydma-maxcnt-bits = <13>;
	status = "disabled";
};

spi1: spi@9000 {
	/*
	 * This spi node can be either SPIM or SPIS, for the user to pick:
	 * compatible = "nordic,nrf-spim" or
	 *              "nordic,nrf-spis".
	 */
	compatible = "nordic,nrf-spim";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0x9000 0x1000>;
	interrupts = <9 NRF_DEFAULT_IRQ_PRIORITY>;
	max-frequency = <DT_FREQ_M(8)>;
	easydma-maxcnt-bits = <13>;
	status = "disabled";
};

spi2: spi@a000 {
	/*
	 * This spi node can be either SPIM or SPIS, for the user to pick:
	 * compatible = "nordic,nrf-spim" or
	 *              "nordic,nrf-spis".
	 */
	compatible = "nordic,nrf-spim";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0xa000 0x1000>;
	interrupts = <10 NRF_DEFAULT_IRQ_PRIORITY>;
	max-frequency = <DT_FREQ_M(8)>;
	easydma-maxcnt-bits = <13>;
	status = "disabled";
};

spi3: spi@b000 {
	/*
	 * This spi node can be either SPIM or SPIS, for the user to pick:
	 * compatible = "nordic,nrf-spim" or
	 *              "nordic,nrf-spis".
	 */
	compatible = "nordic,nrf-spim";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0xb000 0x1000>;
	interrupts = <11 NRF_DEFAULT_IRQ_PRIORITY>;
	max-frequency = <DT_FREQ_M(8)>;
	easydma-maxcnt-bits = <13>;
	status = "disabled";
};

pwm0: pwm@21000 {
	compatible = "nordic,nrf-pwm";
	reg = <0x21000 0x1000>;
	interrupts = <33 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "disabled";
	#pwm-cells = <3>;
};

pwm1: pwm@22000 {
	compatible = "nordic,nrf-pwm";
	reg = <0x22000 0x1000>;
	interrupts = <34 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "disabled";
	#pwm-cells = <3>;
};

pwm2: pwm@23000 {
	compatible = "nordic,nrf-pwm";
	reg = <0x23000 0x1000>;
	interrupts = <35 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "disabled";
	#pwm-cells = <3>;
};

pwm3: pwm@24000 {
	compatible = "nordic,nrf-pwm";
	reg = <0x24000 0x1000>;
	interrupts = <36 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "disabled";
	#pwm-cells = <3>;
};

gpio0: gpio@842500 {
	compatible = "nordic,nrf-gpio";
	gpio-controller;
	reg = <0x842500 0x300>;
	#gpio-cells = <2>;
	status = "disabled";
	port = <0>;
	gpiote-instance = <&gpiote>;
};

rtc0: rtc@14000 {
	compatible = "nordic,nrf-rtc";
	reg = <0x14000 0x1000>;
	cc-num = <4>;
	interrupts = <20 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "disabled";
	clock-frequency = <32768>;
	prescaler = <1>;
};

rtc1: rtc@15000 {
	compatible = "nordic,nrf-rtc";
	reg = <0x15000 0x1000>;
	cc-num = <4>;
	interrupts = <21 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "disabled";
	clock-frequency = <32768>;
	prescaler = <1>;
};

clock: clock@5000 {
	compatible = "nordic,nrf-clock";
	reg = <0x5000 0x1000>;
	interrupts = <5 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "okay";
};

power: power@5000 {
	compatible = "nordic,nrf-power";
	reg = <0x5000 0x1000>;
	ranges = <0x0 0x5000 0x1000>;
	interrupts = <5 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "okay";
	#address-cells = <1>;
	#size-cells = <1>;

	gpregret1: gpregret1@51c {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "nordic,nrf-gpregret";
		reg = <0x51c 0x1>;
		status = "okay";
	};

	gpregret2: gpregret2@520 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "nordic,nrf-gpregret";
		reg = <0x520 0x1>;
		status = "okay";
	};
};

wdt: wdt0: watchdog@18000 {
	compatible = "nordic,nrf-wdt";
	reg = <0x18000 0x1000>;
	interrupts = <24 NRF_DEFAULT_IRQ_PRIORITY>;
	status = "okay";
};

timer0: timer@f000 {
	compatible = "nordic,nrf-timer";
	status = "disabled";
	reg = <0xf000 0x1000>;
	cc-num = <6>;
	max-bit-width = <32>;
	interrupts = <15 NRF_DEFAULT_IRQ_PRIORITY>;
	prescaler = <0>;
};

timer1: timer@10000 {
	compatible = "nordic,nrf-timer";
	status = "disabled";
	reg = <0x10000 0x1000>;
	cc-num = <6>;
	max-bit-width = <32>;
	interrupts = <16 NRF_DEFAULT_IRQ_PRIORITY>;
	prescaler = <0>;
};

timer2: timer@11000 {
	compatible = "nordic,nrf-timer";
	status = "disabled";
	reg = <0x11000 0x1000>;
	cc-num = <6>;
	max-bit-width = <32>;
	interrupts = <17 NRF_DEFAULT_IRQ_PRIORITY>;
	prescaler = <0>;
};