/*
 * Copyright (c) 2019 SEAL AG
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <arm/armv7-m.dtsi>
#include <dt-bindings/clock/kinetis_sim.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/i2c/i2c.h>

/ {
	aliases {
		adc-0 = &adc0;
		gpio-a = &gpioa;
		gpio-b = &gpiob;
		gpio-c = &gpioc;
		gpio-d = &gpiod;
		gpio-e = &gpioe;
		i2c-0 = &i2c0;
		i2c-1 = &i2c1;
		pinmux-a = &pinmux_a;
		pinmux-b = &pinmux_b;
		pinmux-c = &pinmux_c;
		pinmux-d = &pinmux_d;
		pinmux-e = &pinmux_e;
		pwm-1 = &pwm1;
		pwm-2 = &pwm2;
		pwm-3 = &pwm3;
		pwm-4 = &pwm4;
		spi-0 = &spi0;
		spi-1 = &spi1;
		spi-2 = &spi2;
		uart-0 = &uart0;
		uart-1 = &uart1;
		uart-2 = &uart2;
		uart-3 = &uart3;
		uart-4 = &uart4;
		uart-5 = &uart5;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-m7";
			reg = <0>;
		};
	};

	soc {
		mpu: mpu@4000d000 {
			compatible = "nxp,kinetis-mpu";
			reg = <0x4000d000 0x1000>;
			status = "disabled";
		};

		sim: sim@40047000 {
			compatible = "nxp,kinetis-sim";
			reg = <0x40047000 0x2000>;
			label = "SIM";
			#clock-cells = <3>;
		};

		mcg: clock-controller@40064000 {
			compatible = "nxp,kv58-mcg";
			reg = <0x40064000 0x1000>;
			system-clock-frequency = <240000000>;
		};

		osc: clock-controller@40065000 {
			compatible = "nxp,kv58-osc";
			reg = <0x40065000 0x4>;
			enable-external-reference;
		};

		flash_controller: flash-controller@40020000 {
			compatible = "nxp,kinetis-ftfe";
			label = "FLASH_CTRL";
			reg = <0x40020000 0x1000>;
			interrupts = <18 0>, <19 0>;
			interrupt-names = "command-complete", "read-collision";

			#address-cells = <1>;
			#size-cells = <1>;
		};

		adc0: adc@4003b000 {
			compatible = "nxp,kinetis-adc16";
			reg = <0x4003b000 0x1000>;
			interrupts = <37 0>;
			label = "ADC_0";
			status = "disabled";
		};

		gpioa: gpio@400ff000 {
			compatible = "nxp,kinetis-gpio";
			reg = <0x400ff000 0x40>;
			interrupts = <59 2>;
			label = "GPIO_0";
			gpio-controller;
			#gpio-cells = <2>;
		};

		gpiob: gpio@400ff040 {
			compatible = "nxp,kinetis-gpio";
			reg = <0x400ff040 0x40>;
			interrupts = <60 2>;
			label = "GPIO_1";
			gpio-controller;
			#gpio-cells = <2>;
		};

		gpioc: gpio@400ff080 {
			compatible = "nxp,kinetis-gpio";
			reg = <0x400ff080 0x40>;
			interrupts = <61 2>;
			label = "GPIO_2";
			gpio-controller;
			#gpio-cells = <2>;
		};

		gpiod: gpio@400ff0c0 {
			compatible = "nxp,kinetis-gpio";
			reg = <0x400ff0c0 0x40>;
			interrupts = <62 2>;
			label = "GPIO_3";
			gpio-controller;
			#gpio-cells = <2>;
		};

		gpioe: gpio@400ff100 {
			compatible = "nxp,kinetis-gpio";
			reg = <0x400ff100 0x40>;
			interrupts = <63 2>;
			label = "GPIO_4";
			gpio-controller;
			#gpio-cells = <2>;
		};

		i2c0: i2c@40066000 {
			compatible = "nxp,kinetis-i2c";
			clock-frequency = <I2C_BITRATE_STANDARD>;
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x40066000 0x1000>;
			interrupts = <24 0>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x1034 6>;
			label = "I2C_0";
			status = "disabled";
		};

		i2c1: i2c@40067000 {
			compatible = "nxp,kinetis-i2c";
			clock-frequency = <I2C_BITRATE_STANDARD>;
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x40067000 0x1000>;
			interrupts = <25 0>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x1034 7>;
			label = "I2C_1";
			status = "disabled";
		};

		pinmux_a: pinmux@40049000 {
			compatible = "nxp,kinetis-pinmux";
			reg = <0x40049000 0x1000>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x1038 9>;
		};

		pinmux_b: pinmux@4004a000 {
			compatible = "nxp,kinetis-pinmux";
			reg = <0x4004a000 0x1000>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x1038 10>;
		};

		pinmux_c: pinmux@4004b000 {
			compatible = "nxp,kinetis-pinmux";
			reg = <0x4004b000 0x1000>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x1038 11>;
		};

		pinmux_d: pinmux@4004c000 {
			compatible = "nxp,kinetis-pinmux";
			reg = <0x4004c000 0x1000>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x1038 12>;
		};

		pinmux_e: pinmux@4004d000 {
			compatible = "nxp,kinetis-pinmux";
			reg = <0x4004d000 0x1000>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x1038 13>;
		};

		pwm1: pwm@40038000 {
			compatible = "nxp,kinetis-ftm";
			reg = <0x40038000 0x1000>;
			interrupts = <42 0>;
			label = "FTM_0";
			status = "disabled";
			#pwm-cells = <2>;
		};

		pwm2: pwm@40039000 {
			compatible = "nxp,kinetis-ftm";
			reg = <0x40039000 0x1000>;
			interrupts = <43 0>;
			label = "FTM_1";
			status = "disabled";
			#pwm-cells = <2>;
		};

		pwm3: pwm@4003a000 {
			compatible = "nxp,kinetis-ftm";
			reg = <0x4003a000 0x1000>;
			interrupts = <53 0>;
			label = "FTM_2";
			status = "disabled";
			#pwm-cells = <2>;
		};

		pwm4: pwm@40026000 {
			compatible = "nxp,kinetis-ftm";
			reg = <0x40026000 0x1000>;
			interrupts = <71 0>;
			label = "FTM_3";
			status = "disabled";
			#pwm-cells = <2>;
		};

		spi0: spi@4002c000 {
			compatible = "nxp,kinetis-dspi";
			reg = <0x4002c000 0x1000>;
			interrupts = <26 3>;
			label = "SPI_0";
			status = "disabled";
			clocks = <&sim KINETIS_SIM_FAST_PERIPHERAL_CLK 0x103c 12>;
			#address-cells = <1>;
			#size-cells = <0>;
		};

		spi1: spi@4002d000 {
			compatible = "nxp,kinetis-dspi";
			reg = <0x4002d000 0x1000>;
			interrupts = <27 3>;
			label = "SPI_1";
			status = "disabled";
			clocks = <&sim KINETIS_SIM_FAST_PERIPHERAL_CLK 0x103c 13>;
			#address-cells = <1>;
			#size-cells = <0>;
		};

		spi2: spi@400ac000 {
			compatible = "nxp,kinetis-dspi";
			reg = <0x400ac000 0x1000>;
			interrupts = <65 3>;
			label = "SPI_2";
			status = "disabled";
			clocks = <&sim KINETIS_SIM_FAST_PERIPHERAL_CLK 0x1030 12>;
			#address-cells = <1>;
			#size-cells = <0>;
		};

		uart0: uart@4006a000 {
			compatible = "nxp,kinetis-uart";
			reg = <0x4006a000 0x1000>;
			interrupts = <31 0>, <32 0>;
			interrupt-names = "status", "error";
			clocks = <&sim KINETIS_SIM_FAST_PERIPHERAL_CLK 0x1034 10>;
			label = "UART_0";
			status = "disabled";
		};

		uart1: uart@4006b000 {
			compatible = "nxp,kinetis-uart";
			reg = <0x4006b000 0x1000>;
			interrupts = <33 0>, <34 0>;
			interrupt-names = "status", "error";
			clocks = <&sim KINETIS_SIM_FAST_PERIPHERAL_CLK 0x1034 11>;
			label = "UART_1";
			status = "disabled";
		};

		uart2: uart@4006c000 {
			compatible = "nxp,kinetis-uart";
			reg = <0x4006c000 0x1000>;
			interrupts = <35 0>, <36 0>;
			interrupt-names = "status", "error";
			clocks = <&sim KINETIS_SIM_FAST_PERIPHERAL_CLK 0x1034 12>;
			label = "UART_2";
			status = "disabled";
		};

		uart3: uart@4006d000 {
			compatible = "nxp,kinetis-uart";
			reg = <0x4006d000 0x1000>;
			interrupts = <44 0>, <45 0>;
			interrupt-names = "status", "error";
			clocks = <&sim KINETIS_SIM_FAST_PERIPHERAL_CLK 0x1034 13>;
			label = "UART_3";
			status = "disabled";
		};

		uart4: uart@400ea000 {
			compatible = "nxp,kinetis-uart";
			reg = <0x400ea000 0x1000>;
			interrupts = <46 0>, <47 0>;
			interrupt-names = "status", "error";
			clocks = <&sim KINETIS_SIM_FAST_PERIPHERAL_CLK 0x1028 10>;
			label = "UART_4";
			status = "disabled";
		};

		uart5: uart@400eb000 {
			compatible = "nxp,kinetis-uart";
			reg = <0x400eb000 0x1000>;
			interrupts = <28 0>, <29 0>;
			interrupt-names = "status", "error";
			clocks = <&sim KINETIS_SIM_FAST_PERIPHERAL_CLK 0x1028 11>;
			label = "UART_5";
			status = "disabled";
		};
	};
};

&nvic {
	arm,num-irq-priority-bits = <4>;
};