# SPDX-License-Identifier: Apache-2.0

CONFIG_SOC_SERIES_STM32H7X=y
CONFIG_SOC_STM32H745XX=y
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=480000000

# Board config should be specified since there are 2 possible targets
CONFIG_BOARD_NUCLEO_H745ZI_Q_M7=y

# Enable MPU
CONFIG_ARM_MPU=y

# Enable HW stack protection
CONFIG_HW_STACK_PROTECTION=y

# Enable UART ( disable to assign to M4 core)
CONFIG_SERIAL=y

# Console ( disable to assign to M4 core)
CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y

# Enable Pinmux
CONFIG_PINMUX=y

# Enable GPIO
CONFIG_GPIO=y

# Clock Configuration
CONFIG_CLOCK_CONTROL=y

# STLINK provides 8MHz clock input
CONFIG_CLOCK_STM32_HSE_CLOCK=8000000
CONFIG_CLOCK_STM32_SYSCLK_SRC_PLL=y

# Use HSE (bypass) as PLL input
CONFIG_CLOCK_STM32_PLL_SRC_HSE=y
CONFIG_CLOCK_STM32_HSE_BYPASS=y

# Produce 480MHz clock at PLL1 output
CONFIG_CLOCK_STM32_PLL_M_DIVISOR=1
CONFIG_CLOCK_STM32_PLL_N_MULTIPLIER=120
CONFIG_CLOCK_STM32_PLL_P_DIVISOR=2
CONFIG_CLOCK_STM32_PLL_Q_DIVISOR=2
CONFIG_CLOCK_STM32_PLL_R_DIVISOR=2