# Nordic Semiconductor nRF53 MCU line

# Copyright (c) 2019 Nordic Semiconductor ASA
# SPDX-License-Identifier: Apache-2.0

config SOC_NRF5340_CPUAPP
	depends on SOC_SERIES_NRF53X
	bool
	select CPU_HAS_NRF_IDAU
	select CPU_HAS_FPU
	select ARMV8_M_DSP
	select HAS_HW_NRF_CC312
	select HAS_HW_NRF_CLOCK
	select HAS_HW_NRF_DPPIC
	select HAS_HW_NRF_EGU0
	select HAS_HW_NRF_EGU1
	select HAS_HW_NRF_EGU2
	select HAS_HW_NRF_EGU3
	select HAS_HW_NRF_EGU4
	select HAS_HW_NRF_EGU5
	select HAS_HW_NRF_GPIO0
	select HAS_HW_NRF_GPIO1
	select HAS_HW_NRF_GPIOTE
	select HAS_HW_NRF_I2S
	select HAS_HW_NRF_IPC
	select HAS_HW_NRF_NFCT
	select HAS_HW_NRF_NVMC_PE
	select HAS_HW_NRF_PDM
	select HAS_HW_NRF_POWER
	select HAS_HW_NRF_PWM0
	select HAS_HW_NRF_PWM1
	select HAS_HW_NRF_PWM2
	select HAS_HW_NRF_PWM3
	select HAS_HW_NRF_QSPI
	select HAS_HW_NRF_RTC0
	select HAS_HW_NRF_RTC1
	select HAS_HW_NRF_SAADC
	select HAS_HW_NRF_SPIM0
	select HAS_HW_NRF_SPIM1
	select HAS_HW_NRF_SPIM2
	select HAS_HW_NRF_SPIM3
	select HAS_HW_NRF_SPIM4
	select HAS_HW_NRF_SPIS0
	select HAS_HW_NRF_SPIS1
	select HAS_HW_NRF_SPIS2
	select HAS_HW_NRF_SPIS3
	select HAS_HW_NRF_SPU
	select HAS_HW_NRF_TIMER0
	select HAS_HW_NRF_TIMER1
	select HAS_HW_NRF_TIMER2
	select HAS_HW_NRF_TWIM0
	select HAS_HW_NRF_TWIM1
	select HAS_HW_NRF_TWIM2
	select HAS_HW_NRF_TWIM3
	select HAS_HW_NRF_TWIS0
	select HAS_HW_NRF_TWIS1
	select HAS_HW_NRF_TWIS2
	select HAS_HW_NRF_TWIS3
	select HAS_HW_NRF_UARTE0
	select HAS_HW_NRF_UARTE1
	select HAS_HW_NRF_UARTE2
	select HAS_HW_NRF_UARTE3
	select HAS_HW_NRF_USBD
	select HAS_HW_NRF_USBREG
	select HAS_HW_NRF_WDT0
	select HAS_HW_NRF_WDT1

config SOC_NRF5340_CPUNET
	depends on SOC_SERIES_NRF53X
	bool
	select HAS_HW_NRF_ACL
	select HAS_HW_NRF_CLOCK
	select HAS_HW_NRF_CCM
	select HAS_HW_NRF_CCM_LFLEN_8BIT
	select HAS_HW_NRF_DPPIC
	select HAS_HW_NRF_EGU0
	select HAS_HW_NRF_GPIO0
	select HAS_HW_NRF_GPIO1
	select HAS_HW_NRF_GPIOTE
	select HAS_HW_NRF_IPC
	select HAS_HW_NRF_NVMC_PE
	select HAS_HW_NRF_POWER
	select HAS_HW_NRF_RADIO_BLE_2M
	select HAS_HW_NRF_RADIO_BLE_CODED
	select HAS_HW_NRF_RADIO_IEEE802154
	select HAS_HW_NRF_RNG
	select HAS_HW_NRF_RTC0
	select HAS_HW_NRF_RTC1
	select HAS_HW_NRF_SPIM0
	select HAS_HW_NRF_SPIS0
	select HAS_HW_NRF_TEMP
	select HAS_HW_NRF_TIMER0
	select HAS_HW_NRF_TIMER1
	select HAS_HW_NRF_TIMER2
	select HAS_HW_NRF_TWIM0
	select HAS_HW_NRF_TWIS0
	select HAS_HW_NRF_UARTE0
	select HAS_HW_NRF_WDT
	select HAS_NO_SYS_PM

choice
	prompt "nRF53x MCU Selection"
	depends on SOC_SERIES_NRF53X

config SOC_NRF5340_CPUAPP_QKAA
	bool "NRF5340_CPUAPP_QKAA"
	select SOC_NRF5340_CPUAPP

config SOC_NRF5340_CPUNET_QKAA
	bool "NRF5340_CPUNET_QKAA"
	select SOC_NRF5340_CPUNET

endchoice


if SOC_NRF5340_CPUAPP

config SOC_DCDC_NRF53X_APP
	bool
	help
	  Enable nRF53 series System on Chip Application MCU DC/DC converter.

config SOC_DCDC_NRF53X_NET
	bool
	help
	  Enable nRF53 series System on Chip Network MCU DC/DC converter.

config SOC_DCDC_NRF53X_HV
	bool
	help
	  Enable nRF53 series System on Chip High Voltage DC/DC converter.

config SOC_ENABLE_LFXO
	bool "Enable LFXO"
	default y
	help
	  Enable the low-frequency oscillator (LFXO) functionality on XL1 and
	  XL2 pins.
	  This option must be enabled if either application or network core is
	  to use the LFXO. Otherwise, XL1 and XL2 pins will behave as regular
	  GPIOs.

endif # SOC_NRF5340_CPUAPP


config NRF_ENABLE_CACHE
	bool "Enable cache"
	depends on (SOC_NRF5340_CPUAPP && !TRUSTED_EXECUTION_NONSECURE) \
			|| SOC_NRF5340_CPUNET
	default y
	help
	  Instruction and Data cache is available on nRF5340 CPUAPP
	  (Application MCU). It may only be accessed by Secure code.

	  Instruction cache only (I-Cache) is available in nRF5340
	  CPUNET (Network MCU).