Google Git
Sign in
pigweed / pigweed / experimental / 096aad587921b08585d573d2978620d339bd2e9d
commit096aad587921b08585d573d2978620d339bd2e9d[log] [tgz]
authorAnthony DiGirolamo <tonymd@pigweed.infra.roller.google.com>Fri Aug 04 01:31:37 2023 +0000
committerCQ Bot Account <pigweed-scoped@luci-project-accounts.iam.gserviceaccount.com>Fri Aug 04 01:31:37 2023 +0000
tree400ce8c585ea192dbee62896e6f07c2c905f8ed0
parenta47bb9163d4fa5dd7781fed2bc55d36fe1428232 [diff]
[roll third_party/pigweed] pw_console: Set clipboard fallback methods

Adds two new methods of setting the system clipboard: terminal escape
sequence and tmux load-buffer. This is useful if running pw_console
over an SSH connection and Pyperclip can't be used to set the
clipboard.

Original-Reviewed-on: https://pigweed-review.googlesource.com/c/pigweed/pigweed/+/150238

https://pigweed.googlesource.com/pigweed/pigweed
third_party/pigweed Rolled-Commits: 6f8378943e643ed..873331e5df828b8
Roller-URL: https://ci.chromium.org/b/8773734094880191905
GitWatcher: ignore
CQ-Do-Not-Cancel-Tryjobs: true
Change-Id: I3926f7ea2e732212bb5edb51a61607013ca98624
Reviewed-on: https://pigweed-review.googlesource.com/c/pigweed/experimental/+/163150
Commit-Queue: Pigweed Roller <pigweed-roller@pigweed-service-accounts.iam.gserviceaccount.com>
Bot-Commit: Pigweed Roller <pigweed-roller@pigweed-service-accounts.iam.gserviceaccount.com>
1 file changed
tree: 400ce8c585ea192dbee62896e6f07c2c905f8ed0
  1. applications/
  2. build_overrides/
  3. infra/
  4. pw_async_bench/
  5. pw_board_led/
  6. pw_board_led_arduino/
  7. pw_board_led_host/
  8. pw_board_led_mimxrt595_evk/
  9. pw_board_led_pico/
  10. pw_board_led_stm32cube/
  11. pw_board_led_stm32f429i_disc1/
  12. pw_board_led_stm32f769i_disc0/
  13. pw_digital_io_arduino/
  14. pw_digital_io_null/
  15. pw_digital_io_pico/
  16. pw_digital_io_stm32cube/
  17. pw_display_driver/
  18. pw_display_driver_ili9341/
  19. pw_display_driver_imgui/
  20. pw_display_driver_mipi/
  21. pw_display_driver_null/
  22. pw_display_driver_st7735/
  23. pw_display_driver_st7789/
  24. pw_graphics/
  25. pw_mipi_dsi/
  26. pw_mipi_dsi_mcuxpresso/
  27. pw_pixel_pusher/
  28. pw_spi_arduino/
  29. pw_spi_pico/
  30. pw_spi_stm32cube/
  31. pw_spin_delay/
  32. pw_spin_delay_arduino/
  33. pw_spin_delay_host/
  34. pw_spin_delay_mcuxpresso/
  35. pw_spin_delay_pico/
  36. pw_spin_delay_stm32cube/
  37. pw_spin_delay_stm32f429i_disc1/
  38. pw_spin_delay_stm32f769i_disc0/
  39. pw_sys_io_baremetal_stm32f769/
  40. targets/
  41. third_party/
  42. tools/
  43. .clang-format ⇨ third_party/pigweed/.clang-format
  44. activate.sh ⇨ bootstrap.sh
  45. .gitattributes
  46. .gitignore
  47. .gitmodules
  48. .gn
  49. activate.bat
  50. banner.txt
  51. bootstrap.bat
  52. bootstrap.sh
  53. BUILD.gn
  54. BUILDCONFIG.gn
  55. navbar.md
  56. OWNERS
  57. pigweed.json
  58. README.md
README.md

Pigweed Experimental

This repository contains experimental pigweed modules.

Repository setup

Clone this repo with --recursive to get all required submodules.

git clone --recursive https://pigweed.googlesource.com/pigweed/experimental

This will pull the Pigweed source repository into third_party/pigweed. If you already cloned but forgot to --recursive run git submodule update --init to pull all submodules.

pw_graphics

The //pw_graphics folder contains some libraries for drawing to an RGB565 framebuffer and displaying it on various platforms.

The demo applications that make use of these libraries are:

Build instructions

First time setup:

git clone --recursive https://pigweed.googlesource.com/pigweed/experimental
cd experimental
. ./bootstrap.sh
pw package install imgui
pw package install glfw
pw package install stm32cube_f4
pw package install pico_sdk

STM32F429-DISC1

Compile:

gn gen out --export-compile-commands --args="
  dir_pw_third_party_stm32cube_f4=\"$PW_PROJECT_ROOT/environment/packages/stm32cube_f4\"
"
ninja -C out

Flash:

openocd -f third_party/pigweed/targets/stm32f429i_disc1/py/stm32f429i_disc1_utils/openocd_stm32f4xx.cfg -c "program out/stm32f429i_disc1_stm32cube_debug/obj/applications/terminal_display/bin/terminal_demo.elf verify reset exit"

STM32F769-DISC0

First time setup:

pw package install stm32cube_f7

Compile:

gn gen out --export-compile-commands --args="
  dir_pw_third_party_stm32cube_f7=\"//environment/packages/stm32cube_f7\"
"
ninja -C out

Flash:

openocd -f targets/stm32f769i_disc0/py/stm32f769i_disc0_utils/openocd_stm32f7xx.cfg \
  -c "program out/stm32f769i_disc0_debug/obj/applications/blinky/bin/blinky.elf verify reset exit"

Linux, Windows or Mac

Compile:

gn gen out --export-compile-commands --args="
  dir_pw_third_party_imgui=\"$PW_PROJECT_ROOT/environment/packages/imgui\"
  dir_pw_third_party_glfw=\"$PW_PROJECT_ROOT/environment/packages/glfw\"
"
ninja -C out

Run:

out/host_debug/obj/applications/terminal_display/bin/terminal_demo

Raspberry Pi Pico Connected to an external SPI display

Working displays:

Compile:

gn gen out --export-compile-commands --args="
  PICO_SRC_DIR=\"$PW_PROJECT_ROOT/environment/packages/pico_sdk\"
"
ninja -C out

Flash:

  • Using a uf2 file:

    ./out/host_debug/obj/targets/rp2040/bin/elf2uf2 ./out/rp2040/obj/applications/terminal_display/bin/terminal_demo.elf ./out/rp2040/obj/applications/terminal_display/bin/terminal_demo.uf2

    Copy ./out/rp2040/obj/applications/terminal_display/bin/terminal_demo.uf2 to your Pi Pico.

  • Using a Pico Probe and openocd:

    This requires installing the Raspberry Pi foundation's OpenOCD fork for the Pico probe. More details including how to connect the two Pico boards is available at Raspberry Pi Pico and RP2040 - C/C++ Part 2: Debugging with VS Code

    Install RaspberryPi's OpenOCD Fork:

    git clone https://github.com/raspberrypi/openocd.git \
  --branch picoprobe \
  --depth=1 \
  --no-single-branch \
  openocd-picoprobe

cd openocd-picoprobe

./bootstrap
./configure --enable-picoprobe --prefix=$HOME/apps/openocd --disable-werror
make -j2
make install

    Setup udev rules (Linux only):

    cat <<EOF > 49-picoprobe.rules
SUBSYSTEMS=="usb", ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="0004", MODE:="0666"
KERNEL=="ttyACM*", ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="0004", MODE:="0666"
EOF
sudo cp 49-picoprobe.rules /usr/lib/udev/rules.d/49-picoprobe.rules
sudo udevadm control --reload-rules

    Flash the Pico:

    ~/apps/openocd/bin/openocd -f ~/apps/openocd/share/openocd/scripts/interface/picoprobe.cfg -f ~/apps/openocd/share/openocd/scripts/target/rp2040.cfg -c 'program out/rp2040/obj/applications/terminal_display/bin/terminal_demo.elf verify reset exit'

MIMXRT595-EVK Connected to an external MIPI display

Setup NXP SDK:

  1. Build a NXP SDK
  2. Download SDK
  3. Extract SDK's zip file to //environment/SDK_2_12_1_EVK-MIMXRT595

Compile:

gn gen out --export-compile-commands --args="
  pw_MIMXRT595_EVK_SDK=\"//environment/SDK_2_12_1_EVK-MIMXRT595\"
  pw_target_mimxrt595_evk_MANIFEST=\"//environment/SDK_2_12_1_EVK-MIMXRT595/EVK-MIMXRT595_manifest_v3_10.xml\"
  pw_third_party_mcuxpresso_SDK=\"//targets/mimxrt595_evk:mimxrt595_sdk\"
"

ninja -C out

Flash the MIMXRT595-EVK:

Follow the instructions to flash the MIMXRT595-EVK with the SEGGER J-Link firmware and using arm-none-eabi-gdb at https://pigweed.dev/targets/mimxrt595_evk/target_docs.html#running-and-debugging.

Teensy 4.1

https://www.pjrc.com/teensy/loader_cli.html

brew install teensy_loader_cli

OBJCOPY=/Applications/Arduino.app/Contents/Java/hardware/tools/avr/bin/avr-objcopy
INFILE=out/arduino_debug/obj/applications/terminal_display/bin/terminal_demo.elf
OUTFILE=foo.hex
$OBJCOPY -O ihex -R .eeprom -R .fuse -R .lock -R .signature $INFILE $OUTFILE
teensy_loader_cli --mcu=TEENSY41 -w -v $OUTFILE