[roll third_party/pigweed] pw_env_setup: Add Python constraints with hashes
- Split some constraints out into their own
python_base_requirements.txt file. This contains all packages needed
to run pip, wheel, pip-tools. This is installed by default in each
pw_python_venv before project 3p deps.
- New constraint and requirement files:
- `constraint_hashes.list`
For downstream project use which contains packges with hashes for
these files:
- `constraint.list`
- `python_base_requirements.txt`
- `upstream_requirements_lock.txt`
pip-compiled results with hashes for all Upstream Python
requirements. This includes these files:
- `constraint.list`
- `python_base_requirements.txt`
- `pigweed_upstream_requirements.txt`
Currently this file is only used for Bazel's pip_install step.
- Presubmit steps:
- check_upstream_python_constraints: Check if constraints need
regenerating.
- update_upstream_python_constraints: Regenerate all constraint
files with hashes.
- vendor_python_wheels: Downloads all Python packages to a local path
in the out dir. This calls a new top level ninja target which is
not run by default. This will download source Python wheels as
well as binary wheels for all platforms on Python 3.8, 3.9, 3.10,
and 3.11.
- Update some old versioned packages that were missing precompiled
wheel files for Python 3.11.
Original-Bug: b/287302102
Original-Reviewed-on: https://pigweed-review.googlesource.com/c/pigweed/pigweed/+/153470
https://pigweed.googlesource.com/pigweed/pigweed
third_party/pigweed Rolled-Commits: ed4a2a52130ba58..a86a3ece5c7991c
Roller-URL: https://ci.chromium.org/b/8775124354600065569
GitWatcher: ignore
CQ-Do-Not-Cancel-Tryjobs: true
Change-Id: If6286e090adac5d328c010d05d0b8a890a150883
Reviewed-on: https://pigweed-review.googlesource.com/c/pigweed/experimental/+/157051
Commit-Queue: Pigweed Roller <pigweed-roller@pigweed-service-accounts.iam.gserviceaccount.com>
Bot-Commit: Pigweed Roller <pigweed-roller@pigweed-service-accounts.iam.gserviceaccount.com>
This repository contains experimental pigweed modules.
Clone this repo with --recursive to get all required submodules.
git clone --recursive https://pigweed.googlesource.com/pigweed/experimental
This will pull the Pigweed source repository into third_party/pigweed. If you already cloned but forgot to --recursive run git submodule update --init to pull all submodules.
The //pw_graphics folder contains some libraries for drawing to an RGB565 framebuffer and displaying it on various platforms.
The demo applications that make use of these libraries are:
First time setup:
git clone --recursive https://pigweed.googlesource.com/pigweed/experimental cd experimental . ./bootstrap.sh pw package install imgui pw package install glfw pw package install stm32cube_f4 pw package install pico_sdk
Compile:
gn gen out --export-compile-commands --args=" dir_pw_third_party_stm32cube_f4=\"$PW_PROJECT_ROOT/environment/packages/stm32cube_f4\" " ninja -C out
Flash:
openocd -f third_party/pigweed/targets/stm32f429i_disc1/py/stm32f429i_disc1_utils/openocd_stm32f4xx.cfg -c "program out/stm32f429i_disc1_stm32cube_debug/obj/applications/terminal_display/bin/terminal_demo.elf verify reset exit"
First time setup:
pw package install stm32cube_f7
Compile:
gn gen out --export-compile-commands --args=" dir_pw_third_party_stm32cube_f7=\"//environment/packages/stm32cube_f7\" " ninja -C out
Flash:
openocd -f targets/stm32f769i_disc0/py/stm32f769i_disc0_utils/openocd_stm32f7xx.cfg \ -c "program out/stm32f769i_disc0_debug/obj/applications/blinky/bin/blinky.elf verify reset exit"
Compile:
gn gen out --export-compile-commands --args=" dir_pw_third_party_imgui=\"$PW_PROJECT_ROOT/environment/packages/imgui\" dir_pw_third_party_glfw=\"$PW_PROJECT_ROOT/environment/packages/glfw\" " ninja -C out
Run:
out/host_debug/obj/applications/terminal_display/bin/terminal_demo
Working displays:
Compile:
gn gen out --export-compile-commands --args=" PICO_SRC_DIR=\"$PW_PROJECT_ROOT/environment/packages/pico_sdk\" " ninja -C out
Flash:
Using a uf2 file:
./out/host_debug/obj/targets/rp2040/bin/elf2uf2 ./out/rp2040/obj/applications/terminal_display/bin/terminal_demo.elf ./out/rp2040/obj/applications/terminal_display/bin/terminal_demo.uf2
Copy ./out/rp2040/obj/applications/terminal_display/bin/terminal_demo.uf2 to your Pi Pico.
Using a Pico Probe and openocd:
This requires installing the Raspberry Pi foundation's OpenOCD fork for the Pico probe. More details including how to connect the two Pico boards is available at Raspberry Pi Pico and RP2040 - C/C++ Part 2: Debugging with VS Code
Install RaspberryPi's OpenOCD Fork:
git clone https://github.com/raspberrypi/openocd.git \ --branch picoprobe \ --depth=1 \ --no-single-branch \ openocd-picoprobe cd openocd-picoprobe ./bootstrap ./configure --enable-picoprobe --prefix=$HOME/apps/openocd --disable-werror make -j2 make install
Setup udev rules (Linux only):
cat <<EOF > 49-picoprobe.rules SUBSYSTEMS=="usb", ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="0004", MODE:="0666" KERNEL=="ttyACM*", ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="0004", MODE:="0666" EOF sudo cp 49-picoprobe.rules /usr/lib/udev/rules.d/49-picoprobe.rules sudo udevadm control --reload-rules
Flash the Pico:
~/apps/openocd/bin/openocd -f ~/apps/openocd/share/openocd/scripts/interface/picoprobe.cfg -f ~/apps/openocd/share/openocd/scripts/target/rp2040.cfg -c 'program out/rp2040/obj/applications/terminal_display/bin/terminal_demo.elf verify reset exit'
Setup NXP SDK:
Compile:
gn gen out --export-compile-commands --args=" pw_MIMXRT595_EVK_SDK=\"//environment/SDK_2_12_1_EVK-MIMXRT595\" pw_target_mimxrt595_evk_MANIFEST=\"//environment/SDK_2_12_1_EVK-MIMXRT595/EVK-MIMXRT595_manifest_v3_10.xml\" pw_third_party_mcuxpresso_SDK=\"//targets/mimxrt595_evk:mimxrt595_sdk\" " ninja -C out
Flash the MIMXRT595-EVK:
Follow the instructions to flash the MIMXRT595-EVK with the SEGGER J-Link firmware and using arm-none-eabi-gdb at https://pigweed.dev/targets/mimxrt595_evk/target_docs.html#running-and-debugging.
https://www.pjrc.com/teensy/loader_cli.html
brew install teensy_loader_cli
OBJCOPY=/Applications/Arduino.app/Contents/Java/hardware/tools/avr/bin/avr-objcopy INFILE=out/arduino_debug/obj/applications/terminal_display/bin/terminal_demo.elf OUTFILE=foo.hex $OBJCOPY -O ihex -R .eeprom -R .fuse -R .lock -R .signature $INFILE $OUTFILE teensy_loader_cli --mcu=TEENSY41 -w -v $OUTFILE