Google Git
Sign in
pigweed / pigweed / experimental / 0e8c94825f5c3828af48f19048f75e77c655122a
commit0e8c94825f5c3828af48f19048f75e77c655122a[log] [tgz]
authorpigweed-roller <pigweed-roller@pigweed.infra.roller.pigweed-service-accounts.iam.gserviceaccount.com>Sun Apr 06 06:56:16 2025 -0700
committerCQ Bot Account <pigweed-scoped@luci-project-accounts.iam.gserviceaccount.com>Sun Apr 06 06:56:16 2025 -0700
tree443e29e1c031e7d4ee7dc89dc65670c83d010539
parenteee89fb84b3183f3208a0b3b8dbef24144d8b7be [diff]
roll: third_party/pigweed roll: luci

bb
From git_revision:04c096ce4162bfc4eac2ee9a4a5ac063969077a3
To git_revision:049bb25feb40813970cbc8022607b05251700acc

luci-auth
From git_revision:114c14ad0c663833c2ad2fa1fe8a7a47ce5deba9
To git_revision:049bb25feb40813970cbc8022607b05251700acc

gerrit
From git_revision:036d16b462ac8941d3acc3c71edae733cb9bfd5c
To git_revision:049bb25feb40813970cbc8022607b05251700acc

gitiles
From git_revision:036d16b462ac8941d3acc3c71edae733cb9bfd5c
To git_revision:049bb25feb40813970cbc8022607b05251700acc

cas
From git_revision:114c14ad0c663833c2ad2fa1fe8a7a47ce5deba9
To git_revision:049bb25feb40813970cbc8022607b05251700acc

led
From git_revision:77f5166b21acbf6d7ac185a0b1c719730f71da44
To git_revision:049bb25feb40813970cbc8022607b05251700acc

swarming
From git_revision:04c096ce4162bfc4eac2ee9a4a5ac063969077a3
To git_revision:049bb25feb40813970cbc8022607b05251700acc

logdog
From git_revision:77f5166b21acbf6d7ac185a0b1c719730f71da44
To git_revision:049bb25feb40813970cbc8022607b05251700acc

prpc
From git_revision:05d6f54f551fc083915e8ecf1f2d98c5b916aeb6
To git_revision:049bb25feb40813970cbc8022607b05251700acc

luci-cv
From git_revision:04c096ce4162bfc4eac2ee9a4a5ac063969077a3
To git_revision:049bb25feb40813970cbc8022607b05251700acc

Roll-Count: 10
GitWatcher: ignore
Original-Reviewed-on: https://pigweed-review.googlesource.com/c/pigweed/pigweed/+/281552
Bot-Commit: Pigweed Roller <pigweed-roller@pigweed-service-accounts.iam.gserviceaccount.com>
Original-Revision: 0c348e1c1632b30315c501764a2cbb9053f79e1d

Rolled-Repo: https://pigweed.googlesource.com/pigweed/pigweed
Rolled-Commits: 90d1391ff0c2fc..0c348e1c1632b3
Roll-Count: 1
Roller-URL: https://cr-buildbucket.appspot.com/build/8718332513179057825
GitWatcher: ignore
CQ-Do-Not-Cancel-Tryjobs: true
Change-Id: Icf3b2c3ab7f681c21d44035e1f98236ea8aeb7db
Reviewed-on: https://pigweed-review.googlesource.com/c/pigweed/experimental/+/281592
Commit-Queue: Pigweed Roller <pigweed-roller@pigweed-service-accounts.iam.gserviceaccount.com>
Lint: Lint 🤖 <android-build-ayeaye@system.gserviceaccount.com>
Bot-Commit: Pigweed Roller <pigweed-roller@pigweed-service-accounts.iam.gserviceaccount.com>
1 file changed
tree: 443e29e1c031e7d4ee7dc89dc65670c83d010539
  1. applications/
  2. build_overrides/
  3. infra/
  4. pw_async_bench/
  5. pw_board_led/
  6. pw_board_led_arduino/
  7. pw_board_led_host/
  8. pw_board_led_mimxrt595_evk/
  9. pw_board_led_pico/
  10. pw_board_led_stm32cube/
  11. pw_board_led_stm32f429i_disc1/
  12. pw_board_led_stm32f769i_disc0/
  13. pw_digital_io_arduino/
  14. pw_digital_io_null/
  15. pw_digital_io_stm32cube/
  16. pw_display_driver/
  17. pw_display_driver_ili9341/
  18. pw_display_driver_imgui/
  19. pw_display_driver_mipi/
  20. pw_display_driver_null/
  21. pw_display_driver_st7735/
  22. pw_display_driver_st7789/
  23. pw_graphics/
  24. pw_mipi_dsi/
  25. pw_mipi_dsi_mcuxpresso/
  26. pw_pixel_pusher/
  27. pw_pixel_pusher_rp2040_pio/
  28. pw_spi_arduino/
  29. pw_spi_stm32cube/
  30. pw_spin_delay/
  31. pw_spin_delay_arduino/
  32. pw_spin_delay_host/
  33. pw_spin_delay_mcuxpresso/
  34. pw_spin_delay_rp2040/
  35. pw_spin_delay_stm32cube/
  36. pw_spin_delay_stm32f429i_disc1/
  37. pw_spin_delay_stm32f769i_disc0/
  38. pw_sys_io_baremetal_stm32f769/
  39. pw_toolchain_extra/
  40. targets/
  41. third_party/
  42. tools/
  43. .clang-format ⇨ third_party/pigweed/.clang-format
  44. activate.sh ⇨ bootstrap.sh
  45. .bazelignore
  46. .bazelrc
  47. .bazelversion
  48. .clang-tidy
  49. .gitattributes
  50. .gitignore
  51. .gitmodules
  52. .gn
  53. activate.bat
  54. banner.txt
  55. bootstrap.bat
  56. bootstrap.sh
  57. BUILD.bazel
  58. BUILD.gn
  59. BUILDCONFIG.gn
  60. MODULE.bazel
  61. modules.gni
  62. navbar.md
  63. OWNERS
  64. pigweed.json
  65. README.md
  66. ROLLER_OWNERS
README.md

Pigweed Experimental

This repository contains a variety experiments to help inform various Pigweed policies, designs, and implementation behaviors.

Code in this repository is not reviewed to the standard of the main Pigweed repository, and generally speaking is untested and maintained on a best-effort basis. This is not a repository of “early access” Pigweed modules, but more so a sandbox for Pigweed contributors to collaborate on investigations. For more information, see the contribution guidelines for the experimental repository and where to land code.

DO NOT DEPEND ON THIS REPOSITORY IN ANY PRODUCTION PROJECT!

Repository setup

Clone this repo with --recursive to get all required submodules.

git clone --recursive https://pigweed.googlesource.com/pigweed/experimental

This will pull the Pigweed source repository into third_party/pigweed. If you already cloned but forgot to --recursive run git submodule update --init to pull all submodules.

pw_graphics

The //pw_graphics folder contains some libraries for drawing to an RGB565 framebuffer and displaying it on various platforms.

The demo applications that make use of these libraries are:

Build instructions

First time setup:

git clone --recursive https://pigweed.googlesource.com/pigweed/experimental
cd experimental
. ./bootstrap.sh
pw package install imgui
pw package install glfw
pw package install stm32cube_f4
pw package install pico_sdk

STM32F429-DISC1

Compile:

gn gen out --export-compile-commands --args="
  dir_pw_third_party_stm32cube_f4=\"$PW_PROJECT_ROOT/environment/packages/stm32cube_f4\"
"
ninja -C out

Flash:

openocd -f third_party/pigweed/targets/stm32f429i_disc1/py/stm32f429i_disc1_utils/openocd_stm32f4xx.cfg -c "program out/stm32f429i_disc1_stm32cube_debug/obj/applications/terminal_display/bin/terminal_demo.elf verify reset exit"

STM32F769-DISC0

First time setup:

pw package install stm32cube_f7

Compile:

gn gen out --export-compile-commands --args="
  dir_pw_third_party_stm32cube_f7=\"//environment/packages/stm32cube_f7\"
"
ninja -C out

Flash:

openocd -f targets/stm32f769i_disc0/py/stm32f769i_disc0_utils/openocd_stm32f7xx.cfg \
  -c "program out/stm32f769i_disc0_debug/obj/applications/blinky/bin/blinky.elf verify reset exit"

Linux, Windows or Mac

Compile:

gn gen out --export-compile-commands --args="
  dir_pw_third_party_imgui=\"$PW_PROJECT_ROOT/environment/packages/imgui\"
  dir_pw_third_party_glfw=\"$PW_PROJECT_ROOT/environment/packages/glfw\"
"
ninja -C out

Run:

out/host_debug/obj/applications/terminal_display/bin/terminal_demo

CURRENTLY NOT WORKING (https://pwbug.dev/325649415) - Raspberry Pi Pico Connected to an external SPI display

Working displays:

First time setup:

pw package install pico_sdk

Compile:

gn gen out --export-compile-commands --args='
  PICO_SRC_DIR="//environment/packages/pico_sdk"
'
ninja -C out

Flash:

  • Using a uf2 file:

    1. Reboot pico into BOOTSEL mode by holding the bootsel button on startup.
    2. Copy ./out/rp2040/obj/applications/terminal_display/terminal_demo.uf2 to your Pi Pico.

  • Using picotool:

    1. Reboot pico into BOOTSEL mode by holding the bootsel button on startup. Or try forcing a reboot with picotool:
    picotool reboot -f -u
    1. Flash the elf or uf2 file and reboot.
    picotool load ./out/rp2040/obj/applications/terminal_display/bin/terminal_demo.elf
picotool reboot

  • Using a Pico Probe and openocd:

    This requires installing the Raspberry Pi foundation's OpenOCD fork for the Pico probe. More details including how to connect the two Pico boards is available at Raspberry Pi Pico and RP2040 - C/C++ Part 2: Debugging with VS Code

    Install RaspberryPi's OpenOCD Fork:

    git clone https://github.com/raspberrypi/openocd.git \
  --branch picoprobe \
  --depth=1 \
  --no-single-branch \
  openocd-picoprobe

cd openocd-picoprobe

./bootstrap
./configure --enable-picoprobe --prefix=$HOME/apps/openocd --disable-werror
make -j2
make install

    Setup udev rules (Linux only):

    cat <<EOF > 49-picoprobe.rules
SUBSYSTEMS=="usb", ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="0004", MODE:="0666"
KERNEL=="ttyACM*", ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="0004", MODE:="0666"
EOF
sudo cp 49-picoprobe.rules /usr/lib/udev/rules.d/49-picoprobe.rules
sudo udevadm control --reload-rules

    Flash the Pico:

    ~/apps/openocd/bin/openocd -f ~/apps/openocd/share/openocd/scripts/interface/picoprobe.cfg -f ~/apps/openocd/share/openocd/scripts/target/rp2040.cfg -c 'program out/rp2040/obj/applications/terminal_display/bin/terminal_demo.elf verify reset exit'

    Launching gdb*

    ~/apps/openocd/bin/openocd -f ~/apps/openocd/share/openocd/scripts/interface/picoprobe.cfg -f ~/apps/openocd/share/openocd/scripts/target/rp2040.cfg

    gdb-multiarch -ex "target remote :3333" -ex "set print pretty on" out/rp2040/obj/applications/terminal_display/bin/terminal_demo.elf

    arm-none-eabi-gdb can be used in place of gdb-multiarch above.

MIMXRT595-EVK Connected to an external MIPI display

Setup NXP SDK:

  1. Build a NXP SDK
  2. Download SDK
  3. Extract SDK's zip file to //environment/SDK_2_12_1_EVK-MIMXRT595

Compile:

gn gen out --export-compile-commands --args="
  pw_MIMXRT595_EVK_SDK=\"//environment/SDK_2_12_1_EVK-MIMXRT595\"
  pw_target_mimxrt595_evk_MANIFEST=\"//environment/SDK_2_12_1_EVK-MIMXRT595/EVK-MIMXRT595_manifest_v3_10.xml\"
  pw_third_party_mcuxpresso_SDK=\"//targets/mimxrt595_evk:mimxrt595_sdk\"
"

ninja -C out

Flash the MIMXRT595-EVK:

Follow the instructions to flash the MIMXRT595-EVK with the SEGGER J-Link firmware and using arm-none-eabi-gdb at https://pigweed.dev/targets/mimxrt595_evk/target_docs.html#running-and-debugging.

Teensy 4.1

https://www.pjrc.com/teensy/loader_cli.html

brew install teensy_loader_cli

OBJCOPY=/Applications/Arduino.app/Contents/Java/hardware/tools/avr/bin/avr-objcopy
INFILE=out/arduino_debug/obj/applications/terminal_display/bin/terminal_demo.elf
OUTFILE=foo.hex
$OBJCOPY -O ihex -R .eeprom -R .fuse -R .lock -R .signature $INFILE $OUTFILE
teensy_loader_cli --mcu=TEENSY41 -w -v $OUTFILE