[roll third_party/pigweed] pw_chrono_freertos/SystemTimer: Remove false callback precondition Removes a false callback precondition that the xTimerIsTimerActive must return true if the callback is being executed. This unfortunately is not true, as the callback may have been enqueued for execution before the stop command was executed. Original-Bug: 291346908 Original-Reviewed-on: https://pigweed-review.googlesource.com/c/pigweed/pigweed/+/156091 https://pigweed.googlesource.com/pigweed/pigweed third_party/pigweed Rolled-Commits: af428466e09e91e..24432905b8f8de6 Roller-URL: https://ci.chromium.org/b/8775548515140461457 GitWatcher: ignore CQ-Do-Not-Cancel-Tryjobs: true Change-Id: I28411ae73ae8bcec5a172e8d70020e1d9c3a0d00 Reviewed-on: https://pigweed-review.googlesource.com/c/pigweed/experimental/+/155994 Commit-Queue: Pigweed Roller <pigweed-roller@pigweed-service-accounts.iam.gserviceaccount.com> Bot-Commit: Pigweed Roller <pigweed-roller@pigweed-service-accounts.iam.gserviceaccount.com>
This repository contains experimental pigweed modules.
Clone this repo with --recursive to get all required submodules.
git clone --recursive https://pigweed.googlesource.com/pigweed/experimental
This will pull the Pigweed source repository into third_party/pigweed. If you already cloned but forgot to --recursive run git submodule update --init to pull all submodules.
The //pw_graphics folder contains some libraries for drawing to an RGB565 framebuffer and displaying it on various platforms.
The demo applications that make use of these libraries are:
First time setup:
git clone --recursive https://pigweed.googlesource.com/pigweed/experimental cd experimental . ./bootstrap.sh pw package install imgui pw package install glfw pw package install stm32cube_f4 pw package install pico_sdk
Compile:
gn gen out --export-compile-commands --args=" dir_pw_third_party_stm32cube_f4=\"$PW_PROJECT_ROOT/environment/packages/stm32cube_f4\" " ninja -C out
Flash:
openocd -f third_party/pigweed/targets/stm32f429i_disc1/py/stm32f429i_disc1_utils/openocd_stm32f4xx.cfg -c "program out/stm32f429i_disc1_stm32cube_debug/obj/applications/terminal_display/bin/terminal_demo.elf verify reset exit"
First time setup:
pw package install stm32cube_f7
Compile:
gn gen out --export-compile-commands --args=" dir_pw_third_party_stm32cube_f7=\"//environment/packages/stm32cube_f7\" " ninja -C out
Flash:
openocd -f targets/stm32f769i_disc0/py/stm32f769i_disc0_utils/openocd_stm32f7xx.cfg \ -c "program out/stm32f769i_disc0_debug/obj/applications/blinky/bin/blinky.elf verify reset exit"
Compile:
gn gen out --export-compile-commands --args=" dir_pw_third_party_imgui=\"$PW_PROJECT_ROOT/environment/packages/imgui\" dir_pw_third_party_glfw=\"$PW_PROJECT_ROOT/environment/packages/glfw\" " ninja -C out
Run:
out/host_debug/obj/applications/terminal_display/bin/terminal_demo
Working displays:
Compile:
gn gen out --export-compile-commands --args=" PICO_SRC_DIR=\"$PW_PROJECT_ROOT/environment/packages/pico_sdk\" " ninja -C out
Flash:
Using a uf2 file:
./out/host_debug/obj/targets/rp2040/bin/elf2uf2 ./out/rp2040/obj/applications/terminal_display/bin/terminal_demo.elf ./out/rp2040/obj/applications/terminal_display/bin/terminal_demo.uf2
Copy ./out/rp2040/obj/applications/terminal_display/bin/terminal_demo.uf2 to your Pi Pico.
Using a Pico Probe and openocd:
This requires installing the Raspberry Pi foundation's OpenOCD fork for the Pico probe. More details including how to connect the two Pico boards is available at Raspberry Pi Pico and RP2040 - C/C++ Part 2: Debugging with VS Code
Install RaspberryPi's OpenOCD Fork:
git clone https://github.com/raspberrypi/openocd.git \ --branch picoprobe \ --depth=1 \ --no-single-branch \ openocd-picoprobe cd openocd-picoprobe ./bootstrap ./configure --enable-picoprobe --prefix=$HOME/apps/openocd --disable-werror make -j2 make install
Setup udev rules (Linux only):
cat <<EOF > 49-picoprobe.rules SUBSYSTEMS=="usb", ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="0004", MODE:="0666" KERNEL=="ttyACM*", ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="0004", MODE:="0666" EOF sudo cp 49-picoprobe.rules /usr/lib/udev/rules.d/49-picoprobe.rules sudo udevadm control --reload-rules
Flash the Pico:
~/apps/openocd/bin/openocd -f ~/apps/openocd/share/openocd/scripts/interface/picoprobe.cfg -f ~/apps/openocd/share/openocd/scripts/target/rp2040.cfg -c 'program out/rp2040/obj/applications/terminal_display/bin/terminal_demo.elf verify reset exit'
Setup NXP SDK:
Compile:
gn gen out --export-compile-commands --args=" pw_MIMXRT595_EVK_SDK=\"//environment/SDK_2_12_1_EVK-MIMXRT595\" pw_target_mimxrt595_evk_MANIFEST=\"//environment/SDK_2_12_1_EVK-MIMXRT595/EVK-MIMXRT595_manifest_v3_10.xml\" pw_third_party_mcuxpresso_SDK=\"//targets/mimxrt595_evk:mimxrt595_sdk\" " ninja -C out
Flash the MIMXRT595-EVK:
Follow the instructions to flash the MIMXRT595-EVK with the SEGGER J-Link firmware and using arm-none-eabi-gdb at https://pigweed.dev/targets/mimxrt595_evk/target_docs.html#running-and-debugging.
https://www.pjrc.com/teensy/loader_cli.html
brew install teensy_loader_cli
OBJCOPY=/Applications/Arduino.app/Contents/Java/hardware/tools/avr/bin/avr-objcopy INFILE=out/arduino_debug/obj/applications/terminal_display/bin/terminal_demo.elf OUTFILE=foo.hex $OBJCOPY -O ihex -R .eeprom -R .fuse -R .lock -R .signature $INFILE $OUTFILE teensy_loader_cli --mcu=TEENSY41 -w -v $OUTFILE