Google Git
Sign in
pigweed / pigweed / experimental / 22283f03e8a439e83e0c3c169780fde7d50bd2f3
commit22283f03e8a439e83e0c3c169780fde7d50bd2f3[log] [tgz]
authorJonathon Reinhart <jrreinhart@pigweed.infra.roller.google.com>Thu Sep 14 15:45:38 2023 +0000
committerCQ Bot Account <pigweed-scoped@luci-project-accounts.iam.gserviceaccount.com>Thu Sep 14 15:45:38 2023 +0000
tree06c821ddcb49e14c672da2f769c2a5a4e33512b7
parent908a4b652492b6e573baeaba0b32b404b7355d15 [diff]
[roll third_party/pigweed] pw_protobuf: Fix "Casting..." heading level

The "Casting betwen generated StreamEncoder types" heading was <h3>, but
should be below the parent "Encoding" <h4> heading, since it applies to
the generated StreamEncoder classes described there.

Before:

    Overview
      Message Structures
        ...
      Per-Field Writers and Readers
        Encoding
 >>>  Casting betwen generated StreamEncoder types
        Decoding
        Reading a single field

After:

    Overview
      Message Structures
        ...
      Per-Field Writers and Readers
        Encoding
 >>>      Casting betwen generated StreamEncoder types
        Decoding
        Reading a single field

Original-Reviewed-on: https://pigweed-review.googlesource.com/c/pigweed/pigweed/+/171030

https://pigweed.googlesource.com/pigweed/pigweed
third_party/pigweed Rolled-Commits: b3aeab8644a7071..866b77d5f9f2c37
Roller-URL: https://ci.chromium.org/b/8769965937949111809
GitWatcher: ignore
CQ-Do-Not-Cancel-Tryjobs: true
Change-Id: Ie10e69294ca6b78210eb5ff05f48d0ce9b98db8d
Reviewed-on: https://pigweed-review.googlesource.com/c/pigweed/experimental/+/170829
Bot-Commit: Pigweed Roller <pigweed-roller@pigweed-service-accounts.iam.gserviceaccount.com>
Commit-Queue: Pigweed Roller <pigweed-roller@pigweed-service-accounts.iam.gserviceaccount.com>
1 file changed
tree: 06c821ddcb49e14c672da2f769c2a5a4e33512b7
  1. applications/
  2. build_overrides/
  3. infra/
  4. pw_async_bench/
  5. pw_board_led/
  6. pw_board_led_arduino/
  7. pw_board_led_host/
  8. pw_board_led_mimxrt595_evk/
  9. pw_board_led_pico/
  10. pw_board_led_stm32cube/
  11. pw_board_led_stm32f429i_disc1/
  12. pw_board_led_stm32f769i_disc0/
  13. pw_digital_io_arduino/
  14. pw_digital_io_null/
  15. pw_digital_io_pico/
  16. pw_digital_io_stm32cube/
  17. pw_display_driver/
  18. pw_display_driver_ili9341/
  19. pw_display_driver_imgui/
  20. pw_display_driver_mipi/
  21. pw_display_driver_null/
  22. pw_display_driver_st7735/
  23. pw_display_driver_st7789/
  24. pw_graphics/
  25. pw_mipi_dsi/
  26. pw_mipi_dsi_mcuxpresso/
  27. pw_pixel_pusher/
  28. pw_pixel_pusher_rp2040_pio/
  29. pw_spi_arduino/
  30. pw_spi_pico/
  31. pw_spi_stm32cube/
  32. pw_spin_delay/
  33. pw_spin_delay_arduino/
  34. pw_spin_delay_host/
  35. pw_spin_delay_mcuxpresso/
  36. pw_spin_delay_pico/
  37. pw_spin_delay_stm32cube/
  38. pw_spin_delay_stm32f429i_disc1/
  39. pw_spin_delay_stm32f769i_disc0/
  40. pw_sys_io_baremetal_stm32f769/
  41. targets/
  42. third_party/
  43. tools/
  44. .clang-format ⇨ third_party/pigweed/.clang-format
  45. activate.sh ⇨ bootstrap.sh
  46. .gitattributes
  47. .gitignore
  48. .gitmodules
  49. .gn
  50. activate.bat
  51. banner.txt
  52. bootstrap.bat
  53. bootstrap.sh
  54. BUILD.gn
  55. BUILDCONFIG.gn
  56. navbar.md
  57. OWNERS
  58. pigweed.json
  59. README.md
README.md

Pigweed Experimental

This repository contains experimental pigweed modules.

Repository setup

Clone this repo with --recursive to get all required submodules.

git clone --recursive https://pigweed.googlesource.com/pigweed/experimental

This will pull the Pigweed source repository into third_party/pigweed. If you already cloned but forgot to --recursive run git submodule update --init to pull all submodules.

pw_graphics

The //pw_graphics folder contains some libraries for drawing to an RGB565 framebuffer and displaying it on various platforms.

The demo applications that make use of these libraries are:

Build instructions

First time setup:

git clone --recursive https://pigweed.googlesource.com/pigweed/experimental
cd experimental
. ./bootstrap.sh
pw package install imgui
pw package install glfw
pw package install stm32cube_f4
pw package install pico_sdk

STM32F429-DISC1

Compile:

gn gen out --export-compile-commands --args="
  dir_pw_third_party_stm32cube_f4=\"$PW_PROJECT_ROOT/environment/packages/stm32cube_f4\"
"
ninja -C out

Flash:

openocd -f third_party/pigweed/targets/stm32f429i_disc1/py/stm32f429i_disc1_utils/openocd_stm32f4xx.cfg -c "program out/stm32f429i_disc1_stm32cube_debug/obj/applications/terminal_display/bin/terminal_demo.elf verify reset exit"

STM32F769-DISC0

First time setup:

pw package install stm32cube_f7

Compile:

gn gen out --export-compile-commands --args="
  dir_pw_third_party_stm32cube_f7=\"//environment/packages/stm32cube_f7\"
"
ninja -C out

Flash:

openocd -f targets/stm32f769i_disc0/py/stm32f769i_disc0_utils/openocd_stm32f7xx.cfg \
  -c "program out/stm32f769i_disc0_debug/obj/applications/blinky/bin/blinky.elf verify reset exit"

Linux, Windows or Mac

Compile:

gn gen out --export-compile-commands --args="
  dir_pw_third_party_imgui=\"$PW_PROJECT_ROOT/environment/packages/imgui\"
  dir_pw_third_party_glfw=\"$PW_PROJECT_ROOT/environment/packages/glfw\"
"
ninja -C out

Run:

out/host_debug/obj/applications/terminal_display/bin/terminal_demo

Raspberry Pi Pico Connected to an external SPI display

Working displays:

First time setup:

pw package install pico_sdk

Compile:

gn gen out --export-compile-commands --args='
  PICO_SRC_DIR="//environment/packages/pico_sdk"
'
ninja -C out

Flash:

  • Using a uf2 file:

    1. Reboot pico into BOOTSEL mode by holding the bootsel button on startup.
    2. Copy ./out/rp2040/obj/applications/terminal_display/terminal_demo.uf2 to your Pi Pico.

  • Using picotool:

    1. Reboot pico into BOOTSEL mode by holding the bootsel button on startup. Or try forcing a reboot with picotool:
    picotool reboot -f -u
    1. Flash the elf or uf2 file and reboot.
    picotool load ./out/rp2040/obj/applications/terminal_display/bin/terminal_demo.elf
picotool reboot

  • Using a Pico Probe and openocd:

    This requires installing the Raspberry Pi foundation's OpenOCD fork for the Pico probe. More details including how to connect the two Pico boards is available at Raspberry Pi Pico and RP2040 - C/C++ Part 2: Debugging with VS Code

    Install RaspberryPi's OpenOCD Fork:

    git clone https://github.com/raspberrypi/openocd.git \
  --branch picoprobe \
  --depth=1 \
  --no-single-branch \
  openocd-picoprobe

cd openocd-picoprobe

./bootstrap
./configure --enable-picoprobe --prefix=$HOME/apps/openocd --disable-werror
make -j2
make install

    Setup udev rules (Linux only):

    cat <<EOF > 49-picoprobe.rules
SUBSYSTEMS=="usb", ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="0004", MODE:="0666"
KERNEL=="ttyACM*", ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="0004", MODE:="0666"
EOF
sudo cp 49-picoprobe.rules /usr/lib/udev/rules.d/49-picoprobe.rules
sudo udevadm control --reload-rules

    Flash the Pico:

    ~/apps/openocd/bin/openocd -f ~/apps/openocd/share/openocd/scripts/interface/picoprobe.cfg -f ~/apps/openocd/share/openocd/scripts/target/rp2040.cfg -c 'program out/rp2040/obj/applications/terminal_display/bin/terminal_demo.elf verify reset exit'

    Launching gdb*

    ~/apps/openocd/bin/openocd -f ~/apps/openocd/share/openocd/scripts/interface/picoprobe.cfg -f ~/apps/openocd/share/openocd/scripts/target/rp2040.cfg

    gdb-multiarch -ex "target remote :3333" -ex "set print pretty on" out/rp2040/obj/applications/terminal_display/bin/terminal_demo.elf

    arm-none-eabi-gdb can be used in place of gdb-multiarch above.

MIMXRT595-EVK Connected to an external MIPI display

Setup NXP SDK:

  1. Build a NXP SDK
  2. Download SDK
  3. Extract SDK's zip file to //environment/SDK_2_12_1_EVK-MIMXRT595

Compile:

gn gen out --export-compile-commands --args="
  pw_MIMXRT595_EVK_SDK=\"//environment/SDK_2_12_1_EVK-MIMXRT595\"
  pw_target_mimxrt595_evk_MANIFEST=\"//environment/SDK_2_12_1_EVK-MIMXRT595/EVK-MIMXRT595_manifest_v3_10.xml\"
  pw_third_party_mcuxpresso_SDK=\"//targets/mimxrt595_evk:mimxrt595_sdk\"
"

ninja -C out

Flash the MIMXRT595-EVK:

Follow the instructions to flash the MIMXRT595-EVK with the SEGGER J-Link firmware and using arm-none-eabi-gdb at https://pigweed.dev/targets/mimxrt595_evk/target_docs.html#running-and-debugging.

Teensy 4.1

https://www.pjrc.com/teensy/loader_cli.html

brew install teensy_loader_cli

OBJCOPY=/Applications/Arduino.app/Contents/Java/hardware/tools/avr/bin/avr-objcopy
INFILE=out/arduino_debug/obj/applications/terminal_display/bin/terminal_demo.elf
OUTFILE=foo.hex
$OBJCOPY -O ihex -R .eeprom -R .fuse -R .lock -R .signature $INFILE $OUTFILE
teensy_loader_cli --mcu=TEENSY41 -w -v $OUTFILE