roll: third_party/pigweed pw_allocator: Fix deleted contructors for ManagedPtr Gemini was used when resolving b/432456663, and it made a change that escaped notice: if changed the copy-constructor and copy-assignment operator of ManagedPtr from "delete" to "default". This CL corrects that mistake and adds negative compilation tests to verify the derived type of UniquePtr is move-only. Original-Reviewed-on: https://pigweed-review.googlesource.com/c/pigweed/pigweed/+/376233 Original-Revision: e9b977fb4c607001d770ba9d4539d67886c41b5e Rolled-Repo: https://pigweed.googlesource.com/pigweed/pigweed Rolled-Commits: 449f0f9381d433..e9b977fb4c6070 Roll-Count: 1 Roller-URL: https://cr-buildbucket.appspot.com/build/8689490934851755393 GitWatcher: ignore CQ-Do-Not-Cancel-Tryjobs: true Change-Id: I0f51040ec2ed547b227f25ef3b7e575da46eb8f9 Reviewed-on: https://pigweed-review.googlesource.com/c/pigweed/experimental/+/376732
This repository contains a variety experiments to help inform various Pigweed policies, designs, and implementation behaviors.
Code in this repository is not reviewed to the standard of the main Pigweed repository, and generally speaking is untested and maintained on a best-effort basis. This is not a repository of “early access” Pigweed modules, but more so a sandbox for Pigweed contributors to collaborate on investigations. For more information, see the contribution guidelines for the experimental repository and where to land code.
DO NOT DEPEND ON THIS REPOSITORY IN ANY PRODUCTION PROJECT!
Clone this repo with --recursive to get all required submodules.
git clone --recursive https://pigweed.googlesource.com/pigweed/experimental
This will pull the Pigweed source repository into third_party/pigweed. If you already cloned but forgot to --recursive run git submodule update --init to pull all submodules.
The //pw_graphics folder contains some libraries for drawing to an RGB565 framebuffer and displaying it on various platforms.
The demo applications that make use of these libraries are:
First time setup:
git clone --recursive https://pigweed.googlesource.com/pigweed/experimental cd experimental . ./bootstrap.sh pw package install imgui pw package install glfw pw package install stm32cube_f4 pw package install pico_sdk
Compile:
gn gen out --export-compile-commands --args=" dir_pw_third_party_stm32cube_f4=\"$PW_PROJECT_ROOT/environment/packages/stm32cube_f4\" " ninja -C out
Flash:
openocd -f third_party/pigweed/targets/stm32f429i_disc1/py/stm32f429i_disc1_utils/openocd_stm32f4xx.cfg -c "program out/stm32f429i_disc1_stm32cube_debug/obj/applications/terminal_display/bin/terminal_demo.elf verify reset exit"
First time setup:
pw package install stm32cube_f7
Compile:
gn gen out --export-compile-commands --args=" dir_pw_third_party_stm32cube_f7=\"//environment/packages/stm32cube_f7\" " ninja -C out
Flash:
openocd -f targets/stm32f769i_disc0/py/stm32f769i_disc0_utils/openocd_stm32f7xx.cfg \ -c "program out/stm32f769i_disc0_debug/obj/applications/blinky/bin/blinky.elf verify reset exit"
Compile:
gn gen out --export-compile-commands --args=" dir_pw_third_party_imgui=\"$PW_PROJECT_ROOT/environment/packages/imgui\" dir_pw_third_party_glfw=\"$PW_PROJECT_ROOT/environment/packages/glfw\" " ninja -C out
Run:
out/host_debug/obj/applications/terminal_display/bin/terminal_demo
Working displays:
First time setup:
pw package install pico_sdk
Compile:
gn gen out --export-compile-commands --args=' PICO_SRC_DIR="//environment/packages/pico_sdk" ' ninja -C out
Flash:
Using a uf2 file:
./out/rp2040/obj/applications/terminal_display/terminal_demo.uf2 to your Pi Pico.Using picotool:
picotool:picotool reboot -f -u
picotool load ./out/rp2040/obj/applications/terminal_display/bin/terminal_demo.elf picotool reboot
Using a Pico Probe and openocd:
This requires installing the Raspberry Pi foundation's OpenOCD fork for the Pico probe. More details including how to connect the two Pico boards is available at Raspberry Pi Pico and RP2040 - C/C++ Part 2: Debugging with VS Code
Install RaspberryPi's OpenOCD Fork:
git clone https://github.com/raspberrypi/openocd.git \ --branch picoprobe \ --depth=1 \ --no-single-branch \ openocd-picoprobe cd openocd-picoprobe ./bootstrap ./configure --enable-picoprobe --prefix=$HOME/apps/openocd --disable-werror make -j2 make install
Setup udev rules (Linux only):
cat <<EOF > 49-picoprobe.rules SUBSYSTEMS=="usb", ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="0004", MODE:="0666" KERNEL=="ttyACM*", ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="0004", MODE:="0666" EOF sudo cp 49-picoprobe.rules /usr/lib/udev/rules.d/49-picoprobe.rules sudo udevadm control --reload-rules
Flash the Pico:
~/apps/openocd/bin/openocd -f ~/apps/openocd/share/openocd/scripts/interface/picoprobe.cfg -f ~/apps/openocd/share/openocd/scripts/target/rp2040.cfg -c 'program out/rp2040/obj/applications/terminal_display/bin/terminal_demo.elf verify reset exit'
Launching gdb*
~/apps/openocd/bin/openocd -f ~/apps/openocd/share/openocd/scripts/interface/picoprobe.cfg -f ~/apps/openocd/share/openocd/scripts/target/rp2040.cfg
gdb-multiarch -ex "target remote :3333" -ex "set print pretty on" out/rp2040/obj/applications/terminal_display/bin/terminal_demo.elf
arm-none-eabi-gdb can be used in place of gdb-multiarch above.
Setup NXP SDK:
Compile:
gn gen out --export-compile-commands --args=" pw_MIMXRT595_EVK_SDK=\"//environment/SDK_2_12_1_EVK-MIMXRT595\" pw_target_mimxrt595_evk_MANIFEST=\"//environment/SDK_2_12_1_EVK-MIMXRT595/EVK-MIMXRT595_manifest_v3_10.xml\" pw_third_party_mcuxpresso_SDK=\"//targets/mimxrt595_evk:mimxrt595_sdk\" " ninja -C out
Flash the MIMXRT595-EVK:
Follow the instructions to flash the MIMXRT595-EVK with the SEGGER J-Link firmware and using arm-none-eabi-gdb at https://pigweed.dev/targets/mimxrt595_evk/target_docs.html#running-and-debugging.
https://www.pjrc.com/teensy/loader_cli.html
brew install teensy_loader_cli
OBJCOPY=/Applications/Arduino.app/Contents/Java/hardware/tools/avr/bin/avr-objcopy INFILE=out/arduino_debug/obj/applications/terminal_display/bin/terminal_demo.elf OUTFILE=foo.hex $OBJCOPY -O ihex -R .eeprom -R .fuse -R .lock -R .signature $INFILE $OUTFILE teensy_loader_cli --mcu=TEENSY41 -w -v $OUTFILE