commit | df2db1f8a2207525248b62f528906e6bea06334e | [log] [tgz] |
---|---|---|
author | Armando Montanez <amontanez@pigweed.infra.roller.google.com> | Wed Dec 07 03:19:55 2022 +0000 |
committer | CQ Bot Account <pigweed-scoped@luci-project-accounts.iam.gserviceaccount.com> | Wed Dec 07 03:19:55 2022 +0000 |
tree | b069e88bc6297a2cc861ba4591b878bc494db491 | |
parent | d8900e5ce5fa38e78ee97ff83401ff7e8396eefc [diff] |
[roll third_party/pigweed] targets/rp2040: Use tinyusb for stdio Introduces pw_sys_io_pico, and switches the rp2040 target to use USB serial rather than direct UART. Original-Reviewed-on: https://pigweed-review.googlesource.com/c/pigweed/pigweed/+/113516 https://pigweed.googlesource.com/pigweed/pigweed third_party/pigweed Rolled-Commits: 645d444b1a49d25..c1b756aee6cffed Roller-URL: https://ci.chromium.org/b/8795470296274188369 GitWatcher: ignore CQ-Do-Not-Cancel-Tryjobs: true Change-Id: I452235b65c224824935b577238a852e28d403c62 Reviewed-on: https://pigweed-review.googlesource.com/c/pigweed/experimental/+/122923 Commit-Queue: Pigweed Integration Roller <pigweed-integration-roller@pigweed.google.com.iam.gserviceaccount.com> Bot-Commit: Pigweed Integration Roller <pigweed-integration-roller@pigweed.google.com.iam.gserviceaccount.com>
This repository contains experimental pigweed modules.
Clone this repo with --recursive
to get all required submodules.
git clone --recursive https://pigweed.googlesource.com/pigweed/experimental
This will pull the Pigweed source repository into third_party/pigweed
. If you already cloned but forgot to --recursive
run git submodule update --init
to pull all submodules.
The //pw_graphics folder contains some libraries for drawing to an RGB565 framebuffer and displaying it on various platforms.
The demo applications that make use of these libraries are:
First time setup:
git clone --recursive https://pigweed.googlesource.com/pigweed/experimental cd experimental . ./bootstrap.sh pw package install imgui pw package install glfw pw package install stm32cube_f4 pw package install pico_sdk
Compile:
gn gen out --export-compile-commands --args=" dir_pw_third_party_stm32cube_f4=\"$PW_PROJECT_ROOT/environment/packages/stm32cube_f4\" " ninja -C out
Flash:
openocd -f third_party/pigweed/targets/stm32f429i_disc1/py/stm32f429i_disc1_utils/openocd_stm32f4xx.cfg -c "program out/stm32f429i_disc1_stm32cube_debug/obj/applications/terminal_display/bin/terminal_demo.elf verify reset exit"
Compile:
gn gen out --export-compile-commands --args=" dir_pw_third_party_imgui=\"$PW_PROJECT_ROOT/environment/packages/imgui\" dir_pw_third_party_glfw=\"$PW_PROJECT_ROOT/environment/packages/glfw\" " ninja -C out
Run:
out/host_debug/obj/applications/terminal_display/bin/terminal_demo
Working displays:
Compile:
gn gen out --export-compile-commands --args=" PICO_SRC_DIR=\"$PW_PROJECT_ROOT/environment/packages/pico_sdk\" " ninja -C out
Flash:
Using a uf2 file:
./out/host_debug/obj/targets/rp2040/bin/elf2uf2 ./out/rp2040/obj/applications/terminal_display/bin/terminal_demo.elf ./out/rp2040/obj/applications/terminal_display/bin/terminal_demo.uf2
Copy ./out/rp2040/obj/applications/terminal_display/bin/terminal_demo.uf2
to your Pi Pico.
Using a Pico Probe and openocd:
This requires installing the Raspberry Pi foundation's OpenOCD fork for the Pico probe. More details including how to connect the two Pico boards is available at Raspberry Pi Pico and RP2040 - C/C++ Part 2: Debugging with VS Code
Install RaspberryPi's OpenOCD Fork:
git clone https://github.com/raspberrypi/openocd.git \ --branch picoprobe \ --depth=1 \ --no-single-branch \ openocd-picoprobe cd openocd-picoprobe ./bootstrap ./configure --enable-picoprobe --prefix=$HOME/apps/openocd --disable-werror make -j2 make install
Setup udev rules (Linux only):
cat <<EOF > 49-picoprobe.rules SUBSYSTEMS=="usb", ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="0004", MODE:="0666" KERNEL=="ttyACM*", ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="0004", MODE:="0666" EOF sudo cp 49-picoprobe.rules /usr/lib/udev/rules.d/49-picoprobe.rules sudo udevadm control --reload-rules
Flash the Pico:
~/apps/openocd/bin/openocd -f ~/apps/openocd/share/openocd/scripts/interface/picoprobe.cfg -f ~/apps/openocd/share/openocd/scripts/target/rp2040.cfg -c 'program out/rp2040/obj/applications/terminal_display/bin/terminal_demo.elf verify reset exit'
Setup NXP SDK:
Compile:
gn gen out --export-compile-commands --args=" pw_MIMXRT595_EVK_SDK=\"//environment/SDK_2_12_1_EVK-MIMXRT595\" pw_target_mimxrt595_evk_MANIFEST=\"//environment/SDK_2_12_1_EVK-MIMXRT595/EVK-MIMXRT595_manifest_v3_10.xml\" pw_third_party_mcuxpresso_SDK=\"//targets/mimxrt595_evk:mimxrt595_sdk\" " ninja -C out
Flash the MIMXRT595-EVK:
Follow the instructions to flash the MIMXRT595-EVK with the SEGGER J-Link firmware and using arm-none-eabi-gdb
at https://pigweed.dev/targets/mimxrt595_evk/target_docs.html#running-and-debugging.