[roll third_party/pigweed] pw_containers: Improve templated Vector::insert This CL reworks the templated overload of `Vector::insert` that takes two iterators to only match actual iterators. Previously, the template parameter `Iterator` could be anything, and calls meant for `insert(..., size_type, const T&)`, e.g. `insert(..., 3, 3)`, would instead resolve to the templated method and fail to compile. Original-Reviewed-on: https://pigweed-review.googlesource.com/c/pigweed/pigweed/+/149031 https://pigweed.googlesource.com/pigweed/pigweed third_party/pigweed Rolled-Commits: 3b27bce19574ba1..f36fcd9b7ee313c Roller-URL: https://ci.chromium.org/b/8779633734897196257 GitWatcher: ignore CQ-Do-Not-Cancel-Tryjobs: true Change-Id: I329adc45ebff454f73c4030221ef0a052d89055a Reviewed-on: https://pigweed-review.googlesource.com/c/pigweed/experimental/+/149570 Commit-Queue: Pigweed Integration Roller <pigweed-integration-roller@pigweed.google.com.iam.gserviceaccount.com> Bot-Commit: Pigweed Integration Roller <pigweed-integration-roller@pigweed.google.com.iam.gserviceaccount.com>
This repository contains experimental pigweed modules.
Clone this repo with --recursive to get all required submodules.
git clone --recursive https://pigweed.googlesource.com/pigweed/experimental
This will pull the Pigweed source repository into third_party/pigweed. If you already cloned but forgot to --recursive run git submodule update --init to pull all submodules.
The //pw_graphics folder contains some libraries for drawing to an RGB565 framebuffer and displaying it on various platforms.
The demo applications that make use of these libraries are:
First time setup:
git clone --recursive https://pigweed.googlesource.com/pigweed/experimental cd experimental . ./bootstrap.sh pw package install imgui pw package install glfw pw package install stm32cube_f4 pw package install pico_sdk
Compile:
gn gen out --export-compile-commands --args=" dir_pw_third_party_stm32cube_f4=\"$PW_PROJECT_ROOT/environment/packages/stm32cube_f4\" " ninja -C out
Flash:
openocd -f third_party/pigweed/targets/stm32f429i_disc1/py/stm32f429i_disc1_utils/openocd_stm32f4xx.cfg -c "program out/stm32f429i_disc1_stm32cube_debug/obj/applications/terminal_display/bin/terminal_demo.elf verify reset exit"
First time setup:
pw package install stm32cube_f7
Compile:
gn gen out --export-compile-commands --args=" dir_pw_third_party_stm32cube_f7=\"//environment/packages/stm32cube_f7\" " ninja -C out
Flash:
openocd -f targets/stm32f769i_disc0/py/stm32f769i_disc0_utils/openocd_stm32f7xx.cfg \ -c "program out/stm32f769i_disc0_debug/obj/applications/blinky/bin/blinky.elf verify reset exit"
Compile:
gn gen out --export-compile-commands --args=" dir_pw_third_party_imgui=\"$PW_PROJECT_ROOT/environment/packages/imgui\" dir_pw_third_party_glfw=\"$PW_PROJECT_ROOT/environment/packages/glfw\" " ninja -C out
Run:
out/host_debug/obj/applications/terminal_display/bin/terminal_demo
Working displays:
Compile:
gn gen out --export-compile-commands --args=" PICO_SRC_DIR=\"$PW_PROJECT_ROOT/environment/packages/pico_sdk\" " ninja -C out
Flash:
Using a uf2 file:
./out/host_debug/obj/targets/rp2040/bin/elf2uf2 ./out/rp2040/obj/applications/terminal_display/bin/terminal_demo.elf ./out/rp2040/obj/applications/terminal_display/bin/terminal_demo.uf2
Copy ./out/rp2040/obj/applications/terminal_display/bin/terminal_demo.uf2 to your Pi Pico.
Using a Pico Probe and openocd:
This requires installing the Raspberry Pi foundation's OpenOCD fork for the Pico probe. More details including how to connect the two Pico boards is available at Raspberry Pi Pico and RP2040 - C/C++ Part 2: Debugging with VS Code
Install RaspberryPi's OpenOCD Fork:
git clone https://github.com/raspberrypi/openocd.git \ --branch picoprobe \ --depth=1 \ --no-single-branch \ openocd-picoprobe cd openocd-picoprobe ./bootstrap ./configure --enable-picoprobe --prefix=$HOME/apps/openocd --disable-werror make -j2 make install
Setup udev rules (Linux only):
cat <<EOF > 49-picoprobe.rules SUBSYSTEMS=="usb", ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="0004", MODE:="0666" KERNEL=="ttyACM*", ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="0004", MODE:="0666" EOF sudo cp 49-picoprobe.rules /usr/lib/udev/rules.d/49-picoprobe.rules sudo udevadm control --reload-rules
Flash the Pico:
~/apps/openocd/bin/openocd -f ~/apps/openocd/share/openocd/scripts/interface/picoprobe.cfg -f ~/apps/openocd/share/openocd/scripts/target/rp2040.cfg -c 'program out/rp2040/obj/applications/terminal_display/bin/terminal_demo.elf verify reset exit'
Setup NXP SDK:
Compile:
gn gen out --export-compile-commands --args=" pw_MIMXRT595_EVK_SDK=\"//environment/SDK_2_12_1_EVK-MIMXRT595\" pw_target_mimxrt595_evk_MANIFEST=\"//environment/SDK_2_12_1_EVK-MIMXRT595/EVK-MIMXRT595_manifest_v3_10.xml\" pw_third_party_mcuxpresso_SDK=\"//targets/mimxrt595_evk:mimxrt595_sdk\" " ninja -C out
Flash the MIMXRT595-EVK:
Follow the instructions to flash the MIMXRT595-EVK with the SEGGER J-Link firmware and using arm-none-eabi-gdb at https://pigweed.dev/targets/mimxrt595_evk/target_docs.html#running-and-debugging.
https://www.pjrc.com/teensy/loader_cli.html
brew install teensy_loader_cli
OBJCOPY=/Applications/Arduino.app/Contents/Java/hardware/tools/avr/bin/avr-objcopy INFILE=out/arduino_debug/obj/applications/terminal_display/bin/terminal_demo.elf OUTFILE=foo.hex $OBJCOPY -O ihex -R .eeprom -R .fuse -R .lock -R .signature $INFILE $OUTFILE teensy_loader_cli --mcu=TEENSY41 -w -v $OUTFILE