| ##Building |
| In order to build this target, the submodules in `//third_party/stm32cubef7` |
| need to be checked out and the following flag needs to be added to your |
| gn args (gn args out) |
| |
| ``` |
| pw_third_party_stm32cubef7_enabled = "yes" |
| ``` |
| |
| ##Flashing |
| |
| Images can be flashed using the same scripts as the in-tree variant. |
| |
| This command can be used to flash the blinky example: |
| |
| ``` |
| openocd -s ${PW_PIGWEED_CIPD_INSTALL_DIR}/share/openocd/scripts -f ${PW_ROOT}/targets/stm32f769i_disc0/py/stm32f769i_disc0_utils/openocd_stm32f7xx.cfg -c "program out/stm32f769i_disc0_stm32cube_debug/obj/applications/blinky/bin/blinky.elf reset exit" |
| ``` |
