| // Copyright 2023 The Pigweed Authors |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); you may not |
| // use this file except in compliance with the License. You may obtain a copy of |
| // the License at |
| // |
| // https://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| // WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the |
| // License for the specific language governing permissions and limitations under |
| // the License. |
| |
| #include "pi4ioe5v6416/device.h" |
| |
| #include <chrono> |
| #include <cstddef> |
| #include <cstdint> |
| |
| #define PW_LOG_MODULE_NAME "pi4ioe5v6416" |
| #define PW_LOG_LEVEL PW_LOG_LEVEL_DEBUG |
| |
| #include "pw_bytes/bit.h" |
| #include "pw_i2c/address.h" |
| #include "pw_i2c/register_device.h" |
| #include "pw_log/log.h" |
| #include "pw_status/status.h" |
| |
| using ::pw::Status; |
| using namespace std::chrono_literals; |
| |
| namespace pw::pi4ioe5v6416 { |
| |
| namespace { |
| |
| constexpr pw::i2c::Address kAddress = pw::i2c::Address::SevenBit<0x20>(); |
| |
| } // namespace |
| |
| Device::Device(pw::i2c::Initiator& initiator) |
| : initiator_(initiator), |
| device_(initiator, |
| kAddress, |
| endian::little, |
| pw::i2c::RegisterAddressSize::k1Byte) {} |
| |
| Status Device::Enable() { |
| // Port 0 is all button input. |
| device_.WriteRegister8( |
| 0x6, 0xff, pw::chrono::SystemClock::for_at_least(10ms)); |
| // Port 1 pins 6 and 7 are DISP_RESET and TOUCH_RESET which should be high. |
| device_.WriteRegister8( |
| 0x3, 0xff, pw::chrono::SystemClock::for_at_least(10ms)); |
| device_.WriteRegister8( |
| 0x7, 0x3f, pw::chrono::SystemClock::for_at_least(10ms)); |
| |
| return OkStatus(); |
| } |
| |
| Status Device::Probe() { |
| pw::Status probe_result(initiator_.ProbeDeviceFor( |
| kAddress, pw::chrono::SystemClock::for_at_least(10ms))); |
| |
| if (probe_result != pw::OkStatus()) { |
| PW_LOG_DEBUG("pi4ioe5v6416 Probe Failed"); |
| } else { |
| PW_LOG_DEBUG("pi4ioe5v6416 Probe Ok"); |
| } |
| return probe_result; |
| } |
| |
| void Device::LogControllerInfo() { |
| auto port0 = |
| device_.ReadRegister8(0x0, pw::chrono::SystemClock::for_at_least(10ms)); |
| if (port0.ok()) { |
| PW_LOG_INFO("port 0: %02x", *port0); |
| } else { |
| PW_LOG_INFO("port 0 read failed"); |
| } |
| |
| auto port1 = |
| device_.ReadRegister8(0x1, pw::chrono::SystemClock::for_at_least(10ms)); |
| if (port1.ok()) { |
| PW_LOG_INFO("port 1: %02x", *port1); |
| } else { |
| PW_LOG_INFO("port 1 read failed"); |
| } |
| } |
| |
| } // namespace pw::pi4ioe5v6416 |