| commit | f8a97dc8504b21e955cb9ed51a7ffdddfc0e60e5 | [log] [tgz] |
|---|---|---|
| author | pigweed-roller <pigweed-roller@pigweed-service-accounts.iam.gserviceaccount.com> | Mon Oct 07 18:00:31 2024 +0000 |
| committer | CQ Bot Account <pigweed-scoped@luci-project-accounts.iam.gserviceaccount.com> | Mon Oct 07 18:00:31 2024 +0000 |
| tree | 551634fa474f7ee16af1c2bcf40823d6068ddf07 | |
| parent | 0fdc7812e4999eaa2d4c02ccbdc903ff87d5ae3c [diff] |
roll: third_party/pigweed 223c6d9..35c10c4 (3 commits) 35c10c4:https://pigweed-review.googlesource.com/c/pigweed/pigweed/+/240673 Revert "roll: rust" 01e206b:https://pigweed-review.googlesource.com/c/pigweed/pigweed/+/240672 pw_multibuf: Include missing header bf0f12d:https://pigweed-review.googlesource.com/c/pigweed/pigweed/+/240574 roll: go Rolled-Repo: https://pigweed.googlesource.com/pigweed/pigweed Rolled-Commits: 223c6d99c503f1..35c10c46e5761f Roller-URL: https://ci.chromium.org/b/8734715486653261201 GitWatcher: ignore CQ-Do-Not-Cancel-Tryjobs: true Change-Id: Id976922a592181ddcc1016b18ff8e69e885d8c53 Reviewed-on: https://pigweed-review.googlesource.com/c/pigweed/kudzu/+/240597 Bot-Commit: Pigweed Roller <pigweed-roller@pigweed-service-accounts.iam.gserviceaccount.com> Lint: Lint 🤖 <android-build-ayeaye@system.gserviceaccount.com> Commit-Queue: Pigweed Roller <pigweed-roller@pigweed-service-accounts.iam.gserviceaccount.com>
Make sure you've set up Pigweed's prerequisites.
If you're on Windows, you can automate the initial setup by downloading the first-time setup script from cmd.exe:
curl https://pigweed.googlesource.com/pigweed/sample_project/+/main/tools/setup_windows_prerequisites.bat?format=TEXT > setup_pigweed_prerequisites.b64 && certutil -decode -f setup_pigweed_prerequisites.b64 setup_pigweed_prerequisites.bat && del setup_pigweed_prerequisites.b64
Then you can run the script with the following command in cmd.exe:
setup_pigweed_prerequisites.bat
Note: You may see a few UAC prompts as the script installs Git, Python, and enables developer mode.
Once that is done, you can clone this project with the following command:
git clone https://pigweed.googlesource.com/pigweed/kudzu
Pigweed uses a local development environment for most of its tools. This means tools are not installed to your machine, and are instead stored in a directory inside your project (Note: git ignores this directory). The tools are temporarily added to the PATH of the current shell session.
To make sure the latest tooling has been fetched and set up, run the bootstrap command for your operating system:
Windows
bootstrap.bat
Linux & Mac
source ./bootstrap.sh
After tooling updates, you might need to run bootstrap again to ensure the latest tools.
After the initial bootstrap, you can use use the activate scripts to configure the current shell for development without doing a full update.
Windows
activate.bat
Linux & Mac
source ./activate.sh
Install the pico SDK and tool to flash the device.
pw package install pico_sdk
pw package install picotool
These packages will be built and added to the path automatically. There is no need to add these to the gn arguments.
Install the GLFW OpenGL library
sudo apt install libglfw3-dev libglfw3
Put the following into /usr/lib/udev/rules.d/49-picoprobe.rules
# Pico app mode
SUBSYSTEMS=="usb", ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="000a", MODE:="0666"
KERNEL=="ttyACM*", ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="000a", MODE:="0666", SYMLINK+="rp2040"
# RP2 Boot
SUBSYSTEMS=="usb", ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="0003", MODE:="0666"
KERNEL=="ttyACM*", ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="0003", MODE:="0666", SYMLINK+="rp2040"
# Picoprobe
SUBSYSTEMS=="usb", ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="0004", MODE:="0666"
KERNEL=="ttyACM*", ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="0004", MODE:="0666", SYMLINK+="picoprobe"
This will also symlink /dev/picoprobe and /dev/rp2040 to the respective vendor and product ids.
Apply the above rules with:
sudo udevadm control --reload-rules sudo udevadm trigger
pw build
Run the host app and connect to it via pw console:
./out/gn/host_device_simulator.speed_optimized/obj/applications/badge/bin/badge & \ pw console --socket-addr default ; \ killall badge
export ELF=./out/gn/rp2040.size_optimized/obj/applications/badge/bin/badge.elf picotool reboot -f -u && \ sleep 3 && \ picotool load -x $ELF
Connect with pw console:
pw console --verbose \ --baudrate 115200 \ --token-databases ./out/gn/rp2040.size_optimized/obj/applications/badge/bin/badge.elf \ --device /dev/rp2040
From Python Repl window you can issue RPCs interactively:
>>> device.rpcs.kudzu.rpc.Kudzu.PackageTemp() (Status.OK, kudzu.rpc.PackageTempResponse(temp=27.60657501220703))