blob: 9bd9f1fdd3dd880255ef4d79f6eb20a9739ae284 [file] [log] [blame]
/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
* All rights reserved.
*
* This package is an SSL implementation written
* by Eric Young (eay@cryptsoft.com).
* The implementation was written so as to conform with Netscapes SSL.
*
* This library is free for commercial and non-commercial use as long as
* the following conditions are aheared to. The following conditions
* apply to all code found in this distribution, be it the RC4, RSA,
* lhash, DES, etc., code; not just the SSL code. The SSL documentation
* included with this distribution is covered by the same copyright terms
* except that the holder is Tim Hudson (tjh@cryptsoft.com).
*
* Copyright remains Eric Young's, and as such any Copyright notices in
* the code are not to be removed.
* If this package is used in a product, Eric Young should be given attribution
* as the author of the parts of the library used.
* This can be in the form of a textual message at program startup or
* in documentation (online or textual) provided with the package.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* "This product includes cryptographic software written by
* Eric Young (eay@cryptsoft.com)"
* The word 'cryptographic' can be left out if the rouines from the library
* being used are not cryptographic related :-).
* 4. If you include any Windows specific code (or a derivative thereof) from
* the apps directory (application code) you must include an acknowledgement:
* "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
*
* THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* The licence and distribution terms for any publically available version or
* derivative of this code cannot be changed. i.e. this code cannot simply be
* copied and put under another distribution licence
* [including the GNU Public Licence.]
*/
/* ====================================================================
* Copyright (c) 1998-2002 The OpenSSL Project. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* 3. All advertising materials mentioning features or use of this
* software must display the following acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
*
* 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
* endorse or promote products derived from this software without
* prior written permission. For written permission, please contact
* openssl-core@openssl.org.
*
* 5. Products derived from this software may not be called "OpenSSL"
* nor may "OpenSSL" appear in their names without prior written
* permission of the OpenSSL Project.
*
* 6. Redistributions of any form whatsoever must retain the following
* acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit (http://www.openssl.org/)"
*
* THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
* EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
* ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
* ====================================================================
*
* This product includes cryptographic software written by Eric Young
* (eay@cryptsoft.com). This product includes software written by Tim
* Hudson (tjh@cryptsoft.com). */
#include <openssl/ssl.h>
#include <assert.h>
#include <limits.h>
#include <string.h>
#include <openssl/buf.h>
#include <openssl/err.h>
#include <openssl/evp.h>
#include <openssl/mem.h>
#include <openssl/rand.h>
#include "../crypto/internal.h"
#include "internal.h"
static int do_ssl3_write(SSL *ssl, int type, const uint8_t *buf, unsigned len);
/* ssl3_get_record reads a new input record. On success, it places it in
* |ssl->s3->rrec| and returns one. Otherwise it returns <= 0 on error or if
* more data is needed. */
static int ssl3_get_record(SSL *ssl) {
again:
switch (ssl->s3->recv_shutdown) {
case ssl_shutdown_none:
break;
case ssl_shutdown_fatal_alert:
OPENSSL_PUT_ERROR(SSL, SSL_R_PROTOCOL_IS_SHUTDOWN);
return -1;
case ssl_shutdown_close_notify:
return 0;
}
CBS body;
uint8_t type, alert;
size_t consumed;
enum ssl_open_record_t open_ret =
tls_open_record(ssl, &type, &body, &consumed, &alert,
ssl_read_buffer(ssl), ssl_read_buffer_len(ssl));
if (open_ret != ssl_open_record_partial) {
ssl_read_buffer_consume(ssl, consumed);
}
switch (open_ret) {
case ssl_open_record_partial: {
int read_ret = ssl_read_buffer_extend_to(ssl, consumed);
if (read_ret <= 0) {
return read_ret;
}
goto again;
}
case ssl_open_record_success:
if (CBS_len(&body) > 0xffff) {
OPENSSL_PUT_ERROR(SSL, ERR_R_OVERFLOW);
return -1;
}
SSL3_RECORD *rr = &ssl->s3->rrec;
rr->type = type;
rr->length = (uint16_t)CBS_len(&body);
rr->data = (uint8_t *)CBS_data(&body);
return 1;
case ssl_open_record_discard:
goto again;
case ssl_open_record_close_notify:
return 0;
case ssl_open_record_fatal_alert:
return -1;
case ssl_open_record_error:
ssl3_send_alert(ssl, SSL3_AL_FATAL, alert);
return -1;
}
assert(0);
OPENSSL_PUT_ERROR(SSL, ERR_R_INTERNAL_ERROR);
return -1;
}
int ssl3_write_app_data(SSL *ssl, const void *buf, int len) {
assert(!SSL_in_init(ssl) || SSL_in_false_start(ssl));
return ssl3_write_bytes(ssl, SSL3_RT_APPLICATION_DATA, buf, len);
}
/* Call this to write data in records of type |type|. It will return <= 0 if
* not all data has been sent or non-blocking IO. */
int ssl3_write_bytes(SSL *ssl, int type, const void *buf_, int len) {
const uint8_t *buf = buf_;
unsigned tot, n, nw;
assert(ssl->s3->wnum <= INT_MAX);
tot = ssl->s3->wnum;
ssl->s3->wnum = 0;
/* Ensure that if we end up with a smaller value of data to write out than
* the the original len from a write which didn't complete for non-blocking
* I/O and also somehow ended up avoiding the check for this in
* ssl3_write_pending/SSL_R_BAD_WRITE_RETRY as it must never be possible to
* end up with (len-tot) as a large number that will then promptly send
* beyond the end of the users buffer ... so we trap and report the error in
* a way the user will notice. */
if (len < 0 || (size_t)len < tot) {
OPENSSL_PUT_ERROR(SSL, SSL_R_BAD_LENGTH);
return -1;
}
n = (len - tot);
for (;;) {
/* max contains the maximum number of bytes that we can put into a
* record. */
unsigned max = ssl->max_send_fragment;
if (n > max) {
nw = max;
} else {
nw = n;
}
int ret = do_ssl3_write(ssl, type, &buf[tot], nw);
if (ret <= 0) {
ssl->s3->wnum = tot;
return ret;
}
if (ret == (int)n || (type == SSL3_RT_APPLICATION_DATA &&
(ssl->mode & SSL_MODE_ENABLE_PARTIAL_WRITE))) {
return tot + ret;
}
n -= ret;
tot += ret;
}
}
static int ssl3_write_pending(SSL *ssl, int type, const uint8_t *buf,
unsigned int len) {
if (ssl->s3->wpend_tot > (int)len ||
(!(ssl->mode & SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER) &&
ssl->s3->wpend_buf != buf) ||
ssl->s3->wpend_type != type) {
OPENSSL_PUT_ERROR(SSL, SSL_R_BAD_WRITE_RETRY);
return -1;
}
int ret = ssl_write_buffer_flush(ssl);
if (ret <= 0) {
return ret;
}
return ssl->s3->wpend_ret;
}
/* do_ssl3_write writes an SSL record of the given type. */
static int do_ssl3_write(SSL *ssl, int type, const uint8_t *buf, unsigned len) {
/* If there is still data from the previous record, flush it. */
if (ssl_write_buffer_is_pending(ssl)) {
return ssl3_write_pending(ssl, type, buf, len);
}
/* If we have an alert to send, lets send it */
if (ssl->s3->alert_dispatch) {
int ret = ssl->method->dispatch_alert(ssl);
if (ret <= 0) {
return ret;
}
/* if it went, fall through and send more stuff */
}
if (len > SSL3_RT_MAX_PLAIN_LENGTH) {
OPENSSL_PUT_ERROR(SSL, ERR_R_INTERNAL_ERROR);
return -1;
}
if (len == 0) {
return 0;
}
size_t max_out = len + SSL_max_seal_overhead(ssl);
if (max_out < len) {
OPENSSL_PUT_ERROR(SSL, ERR_R_OVERFLOW);
return -1;
}
uint8_t *out;
size_t ciphertext_len;
if (!ssl_write_buffer_init(ssl, &out, max_out) ||
!tls_seal_record(ssl, out, &ciphertext_len, max_out, type, buf, len)) {
return -1;
}
ssl_write_buffer_set_len(ssl, ciphertext_len);
/* memorize arguments so that ssl3_write_pending can detect bad write retries
* later */
ssl->s3->wpend_tot = len;
ssl->s3->wpend_buf = buf;
ssl->s3->wpend_type = type;
ssl->s3->wpend_ret = len;
/* we now just need to write the buffer */
return ssl3_write_pending(ssl, type, buf, len);
}
static int consume_record(SSL *ssl, uint8_t *out, int len, int peek) {
SSL3_RECORD *rr = &ssl->s3->rrec;
if (len <= 0) {
return len;
}
if (len > (int)rr->length) {
len = (int)rr->length;
}
OPENSSL_memcpy(out, rr->data, len);
if (!peek) {
rr->length -= len;
rr->data += len;
if (rr->length == 0) {
/* The record has been consumed, so we may now clear the buffer. */
ssl_read_buffer_discard(ssl);
}
}
return len;
}
int ssl3_read_app_data(SSL *ssl, int *out_got_handshake, uint8_t *buf, int len,
int peek) {
assert(!SSL_in_init(ssl));
assert(ssl->s3->initial_handshake_complete);
*out_got_handshake = 0;
SSL3_RECORD *rr = &ssl->s3->rrec;
for (;;) {
/* A previous iteration may have read a partial handshake message. Do not
* allow more app data in that case. */
int has_hs_data = ssl->init_buf != NULL && ssl->init_buf->length > 0;
/* Get new packet if necessary. */
if (rr->length == 0 && !has_hs_data) {
int ret = ssl3_get_record(ssl);
if (ret <= 0) {
return ret;
}
}
if (has_hs_data || rr->type == SSL3_RT_HANDSHAKE) {
/* Post-handshake data prior to TLS 1.3 is always renegotiation, which we
* never accept as a server. Otherwise |ssl3_get_message| will send
* |SSL_R_EXCESSIVE_MESSAGE_SIZE|. */
if (ssl->server && ssl3_protocol_version(ssl) < TLS1_3_VERSION) {
ssl3_send_alert(ssl, SSL3_AL_FATAL, SSL_AD_NO_RENEGOTIATION);
OPENSSL_PUT_ERROR(SSL, SSL_R_NO_RENEGOTIATION);
return -1;
}
/* Parse post-handshake handshake messages. */
int ret = ssl3_get_message(ssl, -1, ssl_dont_hash_message);
if (ret <= 0) {
return ret;
}
*out_got_handshake = 1;
return -1;
}
if (rr->type != SSL3_RT_APPLICATION_DATA) {
OPENSSL_PUT_ERROR(SSL, SSL_R_UNEXPECTED_RECORD);
ssl3_send_alert(ssl, SSL3_AL_FATAL, SSL_AD_UNEXPECTED_MESSAGE);
return -1;
}
if (rr->length != 0) {
return consume_record(ssl, buf, len, peek);
}
/* Discard empty records and loop again. */
}
}
int ssl3_read_change_cipher_spec(SSL *ssl) {
SSL3_RECORD *rr = &ssl->s3->rrec;
if (rr->length == 0) {
int ret = ssl3_get_record(ssl);
if (ret <= 0) {
return ret;
}
}
if (rr->type != SSL3_RT_CHANGE_CIPHER_SPEC) {
ssl3_send_alert(ssl, SSL3_AL_FATAL, SSL_AD_UNEXPECTED_MESSAGE);
OPENSSL_PUT_ERROR(SSL, SSL_R_UNEXPECTED_RECORD);
return -1;
}
if (rr->length != 1 || rr->data[0] != SSL3_MT_CCS) {
OPENSSL_PUT_ERROR(SSL, SSL_R_BAD_CHANGE_CIPHER_SPEC);
ssl3_send_alert(ssl, SSL3_AL_FATAL, SSL_AD_ILLEGAL_PARAMETER);
return -1;
}
ssl_do_msg_callback(ssl, 0 /* read */, SSL3_RT_CHANGE_CIPHER_SPEC, rr->data,
rr->length);
rr->length = 0;
ssl_read_buffer_discard(ssl);
return 1;
}
void ssl3_read_close_notify(SSL *ssl) {
/* Read records until an error or close_notify. */
while (ssl3_get_record(ssl) > 0) {
;
}
}
int ssl3_read_handshake_bytes(SSL *ssl, uint8_t *buf, int len) {
SSL3_RECORD *rr = &ssl->s3->rrec;
for (;;) {
/* Get new packet if necessary. */
if (rr->length == 0) {
int ret = ssl3_get_record(ssl);
if (ret <= 0) {
return ret;
}
}
if (rr->type != SSL3_RT_HANDSHAKE) {
OPENSSL_PUT_ERROR(SSL, SSL_R_UNEXPECTED_RECORD);
ssl3_send_alert(ssl, SSL3_AL_FATAL, SSL_AD_UNEXPECTED_MESSAGE);
return -1;
}
if (rr->length != 0) {
return consume_record(ssl, buf, len, 0 /* consume data */);
}
/* Discard empty records and loop again. */
}
}
int ssl3_send_alert(SSL *ssl, int level, int desc) {
/* It is illegal to send an alert when we've already sent a closing one. */
if (ssl->s3->send_shutdown != ssl_shutdown_none) {
OPENSSL_PUT_ERROR(SSL, SSL_R_PROTOCOL_IS_SHUTDOWN);
return -1;
}
if (level == SSL3_AL_FATAL) {
ssl->s3->send_shutdown = ssl_shutdown_fatal_alert;
} else if (level == SSL3_AL_WARNING && desc == SSL_AD_CLOSE_NOTIFY) {
ssl->s3->send_shutdown = ssl_shutdown_close_notify;
}
ssl->s3->alert_dispatch = 1;
ssl->s3->send_alert[0] = level;
ssl->s3->send_alert[1] = desc;
if (!ssl_write_buffer_is_pending(ssl)) {
/* Nothing is being written out, so the alert may be dispatched
* immediately. */
return ssl->method->dispatch_alert(ssl);
}
/* The alert will be dispatched later. */
return -1;
}
int ssl3_dispatch_alert(SSL *ssl) {
ssl->s3->alert_dispatch = 0;
int ret = do_ssl3_write(ssl, SSL3_RT_ALERT, &ssl->s3->send_alert[0], 2);
if (ret <= 0) {
ssl->s3->alert_dispatch = 1;
return ret;
}
/* If the alert is fatal, flush the BIO now. */
if (ssl->s3->send_alert[0] == SSL3_AL_FATAL) {
BIO_flush(ssl->wbio);
}
ssl_do_msg_callback(ssl, 1 /* write */, SSL3_RT_ALERT, ssl->s3->send_alert,
2);
int alert = (ssl->s3->send_alert[0] << 8) | ssl->s3->send_alert[1];
ssl_do_info_callback(ssl, SSL_CB_WRITE_ALERT, alert);
return 1;
}