blob: 52a2c3f5cf79afdb473f39485cb0b39d4797ffe0 [file] [log] [blame]
/* Copyright (c) 2015, Google Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
* SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
* OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */
#ifndef OPENSSL_HEADER_CRYPTO_TEST_FILE_TEST_H
#define OPENSSL_HEADER_CRYPTO_TEST_FILE_TEST_H
#include <openssl/base.h>
#include <stdint.h>
OPENSSL_MSVC_PRAGMA(warning(push))
OPENSSL_MSVC_PRAGMA(warning(disable : 4702))
#include <functional>
#include <map>
#include <memory>
#include <set>
#include <string>
#include <vector>
OPENSSL_MSVC_PRAGMA(warning(pop))
// File-based test framework.
//
// This module provides a file-based test framework. The file format is based on
// that of OpenSSL upstream's evp_test and BoringSSL's aead_test. NIST CAVP test
// vector files are also supported. Each input file is a sequence of attributes,
// instructions and blank lines.
//
// Each attribute has the form:
//
// Name = Value
//
// Instructions are enclosed in square brackets and may appear without a value:
//
// [Name = Value]
//
// or
//
// [Name]
//
// Commas in instruction lines are treated as separate instructions. Thus this:
//
// [Name1,Name2]
//
// is the same as:
//
// [Name1]
// [Name2]
//
// Either '=' or ':' may be used to delimit the name from the value. Both the
// name and value have leading and trailing spaces stripped.
//
// Each file contains a number of instruction blocks and test cases.
//
// An instruction block is a sequence of instructions followed by a blank line.
// Instructions apply to all test cases following its appearance, until the next
// instruction block. Instructions are unordered.
//
// A test is a sequence of one or more attributes followed by a blank line. For
// tests that process multiple kinds of test cases, the first attribute is
// parsed out as the test's type and parameter. Otherwise, attributes are
// unordered. The first attribute is also included in the set of attributes, so
// tests which do not dispatch may ignore this mechanism.
//
// Additional blank lines and lines beginning with # are ignored.
//
// Functions in this module freely output to |stderr| on failure. Tests should
// also do so, and it is recommended they include the corresponding test's line
// number in any output. |PrintLine| does this automatically.
//
// Each attribute in a test and all instructions applying to it must be
// consumed. When a test completes, if any attributes or insturctions haven't
// been processed, the framework reports an error.
class FileTest;
typedef bool (*FileTestFunc)(FileTest *t, void *arg);
class FileTest {
public:
enum ReadResult {
kReadSuccess,
kReadEOF,
kReadError,
};
class LineReader {
public:
virtual ~LineReader() {}
virtual ReadResult ReadLine(char *out, size_t len) = 0;
};
struct Options {
// path is the path to the input file.
const char *path = nullptr;
// callback is called for each test. It should get the parameters from this
// object and signal any errors by returning false.
FileTestFunc callback = nullptr;
// arg is an opaque pointer that is passed to |callback|.
void *arg = nullptr;
// silent suppressed the "PASS" string that is otherwise printed after
// successful runs.
bool silent = false;
// comment_callback is called after each comment in the input is parsed.
std::function<void(const std::string&)> comment_callback;
// is_kas_test is true if a NIST “KAS” test is being parsed. These tests
// are inconsistent with the other NIST files to such a degree that they
// need their own boolean.
bool is_kas_test = false;
};
explicit FileTest(std::unique_ptr<LineReader> reader,
std::function<void(const std::string &)> comment_callback,
bool is_kas_test);
~FileTest();
// ReadNext reads the next test from the file. It returns |kReadSuccess| if
// successfully reading a test and |kReadEOF| at the end of the file. On
// error or if the previous test had unconsumed attributes, it returns
// |kReadError|.
ReadResult ReadNext();
// PrintLine is a variant of printf which prepends the line number and appends
// a trailing newline.
void PrintLine(const char *format, ...) OPENSSL_PRINTF_FORMAT_FUNC(2, 3);
unsigned start_line() const { return start_line_; }
// GetType returns the name of the first attribute of the current test.
const std::string &GetType();
// GetParameter returns the value of the first attribute of the current test.
const std::string &GetParameter();
// HasAttribute returns true if the current test has an attribute named |key|.
bool HasAttribute(const std::string &key);
// GetAttribute looks up the attribute with key |key|. It sets |*out_value| to
// the value and returns true if it exists and returns false with an error to
// |stderr| otherwise.
bool GetAttribute(std::string *out_value, const std::string &key);
// GetAttributeOrDie looks up the attribute with key |key| and aborts if it is
// missing. It should only be used after a |HasAttribute| call.
const std::string &GetAttributeOrDie(const std::string &key);
// IgnoreAttribute marks the attribute with key |key| as used.
void IgnoreAttribute(const std::string &key) { HasAttribute(key); }
// GetBytes looks up the attribute with key |key| and decodes it as a byte
// string. On success, it writes the result to |*out| and returns
// true. Otherwise it returns false with an error to |stderr|. The value may
// be either a hexadecimal string or a quoted ASCII string. It returns true on
// success and returns false with an error to |stderr| on failure.
bool GetBytes(std::vector<uint8_t> *out, const std::string &key);
// ExpectBytesEqual returns true if |expected| and |actual| are equal.
// Otherwise, it returns false and prints a message to |stderr|.
bool ExpectBytesEqual(const uint8_t *expected, size_t expected_len,
const uint8_t *actual, size_t actual_len);
// AtNewInstructionBlock returns true if the current test was immediately
// preceded by an instruction block.
bool IsAtNewInstructionBlock() const;
// HasInstruction returns true if the current test has an instruction.
bool HasInstruction(const std::string &key);
// IgnoreInstruction marks the instruction with key |key| as used.
void IgnoreInstruction(const std::string &key) { HasInstruction(key); }
// GetInstruction looks up the instruction with key |key|. It sets
// |*out_value| to the value (empty string if the instruction has no value)
// and returns true if it exists and returns false with an error to |stderr|
// otherwise.
bool GetInstruction(std::string *out_value, const std::string &key);
// GetInstructionBytes behaves like GetBytes, but looks up the corresponding
// instruction.
bool GetInstructionBytes(std::vector<uint8_t> *out, const std::string &key);
// CurrentTestToString returns the file content parsed for the current test.
// If the current test was preceded by an instruction block, the return test
// case is preceded by the instruction block and a single blank line. All
// other blank or comment lines are omitted.
const std::string &CurrentTestToString() const;
// InjectInstruction adds a key value pair to the most recently parsed set of
// instructions.
void InjectInstruction(const std::string &key, const std::string &value);
// SkipCurrent passes the current test case. Unused attributes are ignored.
void SkipCurrent();
private:
void ClearTest();
void ClearInstructions();
void OnKeyUsed(const std::string &key);
void OnInstructionUsed(const std::string &key);
bool ConvertToBytes(std::vector<uint8_t> *out, const std::string &value);
std::unique_ptr<LineReader> reader_;
// line_ is the number of lines read.
unsigned line_ = 0;
// start_line_ is the line number of the first attribute of the test.
unsigned start_line_ = 0;
// type_ is the name of the first attribute of the test.
std::string type_;
// parameter_ is the value of the first attribute.
std::string parameter_;
// attributes_ contains all attributes in the test, including the first.
std::map<std::string, std::string> attributes_;
// instructions_ contains all instructions in scope for the test.
std::map<std::string, std::string> instructions_;
// unused_attributes_ is the set of attributes that have not been queried.
std::set<std::string> unused_attributes_;
// unused_instructions_ is the set of instructions that have not been queried.
std::set<std::string> unused_instructions_;
std::string current_test_;
bool is_at_new_instruction_block_ = false;
bool seen_non_comment_ = false;
bool is_kas_test_ = false;
// comment_callback_, if set, is a callback function that is called with the
// contents of each comment as they are parsed.
std::function<void(const std::string&)> comment_callback_;
FileTest(const FileTest &) = delete;
FileTest &operator=(const FileTest &) = delete;
};
// FileTestMain runs a file-based test out of |path| and returns an exit code
// suitable to return out of |main|. |run_test| should return true on pass and
// false on failure. FileTestMain also implements common handling of the 'Error'
// attribute. A test with that attribute is expected to fail. The value of the
// attribute is the reason string of the expected OpenSSL error code.
//
// Tests are guaranteed to run serially and may affect global state if need be.
// It is legal to use "tests" which, for example, import a private key into a
// list of keys. This may be used to initialize a shared set of keys for many
// tests. However, if one test fails, the framework will continue to run
// subsequent tests.
int FileTestMain(FileTestFunc run_test, void *arg, const char *path);
// FileTestMain accepts a larger number of options via a struct.
int FileTestMain(const FileTest::Options &opts);
// FileTestGTest behaves like FileTestMain, but for GTest. |path| must be the
// name of a test file embedded in the test binary.
void FileTestGTest(const char *path, std::function<void(FileTest *)> run_test);
#endif // OPENSSL_HEADER_CRYPTO_TEST_FILE_TEST_H