| /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) |
| * All rights reserved. |
| * |
| * This package is an SSL implementation written |
| * by Eric Young (eay@cryptsoft.com). |
| * The implementation was written so as to conform with Netscapes SSL. |
| * |
| * This library is free for commercial and non-commercial use as long as |
| * the following conditions are aheared to. The following conditions |
| * apply to all code found in this distribution, be it the RC4, RSA, |
| * lhash, DES, etc., code; not just the SSL code. The SSL documentation |
| * included with this distribution is covered by the same copyright terms |
| * except that the holder is Tim Hudson (tjh@cryptsoft.com). |
| * |
| * Copyright remains Eric Young's, and as such any Copyright notices in |
| * the code are not to be removed. |
| * If this package is used in a product, Eric Young should be given attribution |
| * as the author of the parts of the library used. |
| * This can be in the form of a textual message at program startup or |
| * in documentation (online or textual) provided with the package. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. All advertising materials mentioning features or use of this software |
| * must display the following acknowledgement: |
| * "This product includes cryptographic software written by |
| * Eric Young (eay@cryptsoft.com)" |
| * The word 'cryptographic' can be left out if the rouines from the library |
| * being used are not cryptographic related :-). |
| * 4. If you include any Windows specific code (or a derivative thereof) from |
| * the apps directory (application code) you must include an acknowledgement: |
| * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" |
| * |
| * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| * |
| * The licence and distribution terms for any publically available version or |
| * derivative of this code cannot be changed. i.e. this code cannot simply be |
| * copied and put under another distribution licence |
| * [including the GNU Public Licence.] |
| */ |
| /* ==================================================================== |
| * Copyright (c) 1998-2007 The OpenSSL Project. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * |
| * 3. All advertising materials mentioning features or use of this |
| * software must display the following acknowledgment: |
| * "This product includes software developed by the OpenSSL Project |
| * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" |
| * |
| * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to |
| * endorse or promote products derived from this software without |
| * prior written permission. For written permission, please contact |
| * openssl-core@openssl.org. |
| * |
| * 5. Products derived from this software may not be called "OpenSSL" |
| * nor may "OpenSSL" appear in their names without prior written |
| * permission of the OpenSSL Project. |
| * |
| * 6. Redistributions of any form whatsoever must retain the following |
| * acknowledgment: |
| * "This product includes software developed by the OpenSSL Project |
| * for use in the OpenSSL Toolkit (http://www.openssl.org/)" |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY |
| * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR |
| * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR |
| * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED |
| * OF THE POSSIBILITY OF SUCH DAMAGE. |
| * ==================================================================== |
| * |
| * This product includes cryptographic software written by Eric Young |
| * (eay@cryptsoft.com). This product includes software written by Tim |
| * Hudson (tjh@cryptsoft.com). |
| * |
| */ |
| /* ==================================================================== |
| * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED. |
| * ECC cipher suite support in OpenSSL originally developed by |
| * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project. |
| */ |
| /* ==================================================================== |
| * Copyright 2005 Nokia. All rights reserved. |
| * |
| * The portions of the attached software ("Contribution") is developed by |
| * Nokia Corporation and is licensed pursuant to the OpenSSL open source |
| * license. |
| * |
| * The Contribution, originally written by Mika Kousa and Pasi Eronen of |
| * Nokia Corporation, consists of the "PSK" (Pre-Shared Key) ciphersuites |
| * support (see RFC 4279) to OpenSSL. |
| * |
| * No patent licenses or other rights except those expressly stated in |
| * the OpenSSL open source license shall be deemed granted or received |
| * expressly, by implication, estoppel, or otherwise. |
| * |
| * No assurances are provided by Nokia that the Contribution does not |
| * infringe the patent or other intellectual property rights of any third |
| * party or that the license provides you with all the necessary rights |
| * to make use of the Contribution. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IN |
| * ADDITION TO THE DISCLAIMERS INCLUDED IN THE LICENSE, NOKIA |
| * SPECIFICALLY DISCLAIMS ANY LIABILITY FOR CLAIMS BROUGHT BY YOU OR ANY |
| * OTHER ENTITY BASED ON INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OR |
| * OTHERWISE. |
| */ |
| |
| #ifndef OPENSSL_HEADER_SSL_INTERNAL_H |
| #define OPENSSL_HEADER_SSL_INTERNAL_H |
| |
| #include <openssl/base.h> |
| |
| #include <stdlib.h> |
| |
| #include <limits> |
| #include <new> |
| #include <type_traits> |
| #include <utility> |
| |
| #include <openssl/aead.h> |
| #include <openssl/err.h> |
| #include <openssl/lhash.h> |
| #include <openssl/mem.h> |
| #include <openssl/ssl.h> |
| #include <openssl/span.h> |
| #include <openssl/stack.h> |
| |
| #include "../crypto/err/internal.h" |
| #include "../crypto/internal.h" |
| |
| |
| #if defined(OPENSSL_WINDOWS) |
| // Windows defines struct timeval in winsock2.h. |
| OPENSSL_MSVC_PRAGMA(warning(push, 3)) |
| #include <winsock2.h> |
| OPENSSL_MSVC_PRAGMA(warning(pop)) |
| #else |
| #include <sys/time.h> |
| #endif |
| |
| |
| namespace bssl { |
| |
| struct SSL_HANDSHAKE; |
| struct SSL_PROTOCOL_METHOD; |
| |
| // C++ utilities. |
| |
| // New behaves like |new| but uses |OPENSSL_malloc| for memory allocation. It |
| // returns nullptr on allocation error. It only implements single-object |
| // allocation and not new T[n]. |
| // |
| // Note: unlike |new|, this does not support non-public constructors. |
| template <typename T, typename... Args> |
| T *New(Args &&... args) { |
| void *t = OPENSSL_malloc(sizeof(T)); |
| if (t == nullptr) { |
| OPENSSL_PUT_ERROR(SSL, ERR_R_MALLOC_FAILURE); |
| return nullptr; |
| } |
| return new (t) T(std::forward<Args>(args)...); |
| } |
| |
| // Delete behaves like |delete| but uses |OPENSSL_free| to release memory. |
| // |
| // Note: unlike |delete| this does not support non-public destructors. |
| template <typename T> |
| void Delete(T *t) { |
| if (t != nullptr) { |
| t->~T(); |
| OPENSSL_free(t); |
| } |
| } |
| |
| // All types with kAllowUniquePtr set may be used with UniquePtr. Other types |
| // may be C structs which require a |BORINGSSL_MAKE_DELETER| registration. |
| namespace internal { |
| template <typename T> |
| struct DeleterImpl<T, typename std::enable_if<T::kAllowUniquePtr>::type> { |
| static void Free(T *t) { Delete(t); } |
| }; |
| } |
| |
| // MakeUnique behaves like |std::make_unique| but returns nullptr on allocation |
| // error. |
| template <typename T, typename... Args> |
| UniquePtr<T> MakeUnique(Args &&... args) { |
| return UniquePtr<T>(New<T>(std::forward<Args>(args)...)); |
| } |
| |
| #if defined(BORINGSSL_ALLOW_CXX_RUNTIME) |
| #define HAS_VIRTUAL_DESTRUCTOR |
| #define PURE_VIRTUAL = 0 |
| #else |
| // HAS_VIRTUAL_DESTRUCTOR should be declared in any base class which defines a |
| // virtual destructor. This avoids a dependency on |_ZdlPv| and prevents the |
| // class from being used with |delete|. |
| #define HAS_VIRTUAL_DESTRUCTOR \ |
| void operator delete(void *) { abort(); } |
| |
| // PURE_VIRTUAL should be used instead of = 0 when defining pure-virtual |
| // functions. This avoids a dependency on |__cxa_pure_virtual| but loses |
| // compile-time checking. |
| #define PURE_VIRTUAL { abort(); } |
| #endif |
| |
| // CONSTEXPR_ARRAY works around a VS 2015 bug where ranged for loops don't work |
| // on constexpr arrays. |
| #if defined(_MSC_VER) && !defined(__clang__) && _MSC_VER < 1910 |
| #define CONSTEXPR_ARRAY const |
| #else |
| #define CONSTEXPR_ARRAY constexpr |
| #endif |
| |
| // Array<T> is an owning array of elements of |T|. |
| template <typename T> |
| class Array { |
| public: |
| // Array's default constructor creates an empty array. |
| Array() {} |
| Array(const Array &) = delete; |
| Array(Array &&other) { *this = std::move(other); } |
| |
| ~Array() { Reset(); } |
| |
| Array &operator=(const Array &) = delete; |
| Array &operator=(Array &&other) { |
| Reset(); |
| other.Release(&data_, &size_); |
| return *this; |
| } |
| |
| const T *data() const { return data_; } |
| T *data() { return data_; } |
| size_t size() const { return size_; } |
| bool empty() const { return size_ == 0; } |
| |
| const T &operator[](size_t i) const { return data_[i]; } |
| T &operator[](size_t i) { return data_[i]; } |
| |
| T *begin() { return data_; } |
| const T *cbegin() const { return data_; } |
| T *end() { return data_ + size_; } |
| const T *cend() const { return data_ + size_; } |
| |
| void Reset() { Reset(nullptr, 0); } |
| |
| // Reset releases the current contents of the array and takes ownership of the |
| // raw pointer supplied by the caller. |
| void Reset(T *new_data, size_t new_size) { |
| for (size_t i = 0; i < size_; i++) { |
| data_[i].~T(); |
| } |
| OPENSSL_free(data_); |
| data_ = new_data; |
| size_ = new_size; |
| } |
| |
| // Release releases ownership of the array to a raw pointer supplied by the |
| // caller. |
| void Release(T **out, size_t *out_size) { |
| *out = data_; |
| *out_size = size_; |
| data_ = nullptr; |
| size_ = 0; |
| } |
| |
| // Init replaces the array with a newly-allocated array of |new_size| |
| // default-constructed copies of |T|. It returns true on success and false on |
| // error. |
| // |
| // Note that if |T| is a primitive type like |uint8_t|, it is uninitialized. |
| bool Init(size_t new_size) { |
| Reset(); |
| if (new_size == 0) { |
| return true; |
| } |
| |
| if (new_size > std::numeric_limits<size_t>::max() / sizeof(T)) { |
| OPENSSL_PUT_ERROR(SSL, ERR_R_OVERFLOW); |
| return false; |
| } |
| data_ = reinterpret_cast<T*>(OPENSSL_malloc(new_size * sizeof(T))); |
| if (data_ == nullptr) { |
| OPENSSL_PUT_ERROR(SSL, ERR_R_MALLOC_FAILURE); |
| return false; |
| } |
| size_ = new_size; |
| for (size_t i = 0; i < size_; i++) { |
| new (&data_[i]) T; |
| } |
| return true; |
| } |
| |
| // CopyFrom replaces the array with a newly-allocated copy of |in|. It returns |
| // true on success and false on error. |
| bool CopyFrom(Span<const uint8_t> in) { |
| if (!Init(in.size())) { |
| return false; |
| } |
| OPENSSL_memcpy(data_, in.data(), in.size()); |
| return true; |
| } |
| |
| private: |
| T *data_ = nullptr; |
| size_t size_ = 0; |
| }; |
| |
| // CBBFinishArray behaves like |CBB_finish| but stores the result in an Array. |
| OPENSSL_EXPORT bool CBBFinishArray(CBB *cbb, Array<uint8_t> *out); |
| |
| |
| // Protocol versions. |
| // |
| // Due to DTLS's historical wire version differences and to support multiple |
| // variants of the same protocol during development, we maintain two notions of |
| // version. |
| // |
| // The "version" or "wire version" is the actual 16-bit value that appears on |
| // the wire. It uniquely identifies a version and is also used at API |
| // boundaries. The set of supported versions differs between TLS and DTLS. Wire |
| // versions are opaque values and may not be compared numerically. |
| // |
| // The "protocol version" identifies the high-level handshake variant being |
| // used. DTLS versions map to the corresponding TLS versions. Draft TLS 1.3 |
| // variants all map to TLS 1.3. Protocol versions are sequential and may be |
| // compared numerically. |
| |
| // ssl_protocol_version_from_wire sets |*out| to the protocol version |
| // corresponding to wire version |version| and returns true. If |version| is not |
| // a valid TLS or DTLS version, it returns false. |
| // |
| // Note this simultaneously handles both DTLS and TLS. Use one of the |
| // higher-level functions below for most operations. |
| bool ssl_protocol_version_from_wire(uint16_t *out, uint16_t version); |
| |
| // ssl_get_version_range sets |*out_min_version| and |*out_max_version| to the |
| // minimum and maximum enabled protocol versions, respectively. |
| bool ssl_get_version_range(const SSL *ssl, uint16_t *out_min_version, |
| uint16_t *out_max_version); |
| |
| // ssl_supports_version returns whether |hs| supports |version|. |
| bool ssl_supports_version(SSL_HANDSHAKE *hs, uint16_t version); |
| |
| // ssl_add_supported_versions writes the supported versions of |hs| to |cbb|, in |
| // decreasing preference order. |
| bool ssl_add_supported_versions(SSL_HANDSHAKE *hs, CBB *cbb); |
| |
| // ssl_negotiate_version negotiates a common version based on |hs|'s preferences |
| // and the peer preference list in |peer_versions|. On success, it returns true |
| // and sets |*out_version| to the selected version. Otherwise, it returns false |
| // and sets |*out_alert| to an alert to send. |
| bool ssl_negotiate_version(SSL_HANDSHAKE *hs, uint8_t *out_alert, |
| uint16_t *out_version, const CBS *peer_versions); |
| |
| // ssl_protocol_version returns |ssl|'s protocol version. It is an error to |
| // call this function before the version is determined. |
| uint16_t ssl_protocol_version(const SSL *ssl); |
| |
| // Cipher suites. |
| |
| } // namespace bssl |
| |
| struct ssl_cipher_st { |
| // name is the OpenSSL name for the cipher. |
| const char *name; |
| // standard_name is the IETF name for the cipher. |
| const char *standard_name; |
| // id is the cipher suite value bitwise OR-d with 0x03000000. |
| uint32_t id; |
| |
| // algorithm_* determine the cipher suite. See constants below for the values. |
| uint32_t algorithm_mkey; |
| uint32_t algorithm_auth; |
| uint32_t algorithm_enc; |
| uint32_t algorithm_mac; |
| uint32_t algorithm_prf; |
| }; |
| |
| namespace bssl { |
| |
| // Bits for |algorithm_mkey| (key exchange algorithm). |
| #define SSL_kRSA 0x00000001u |
| #define SSL_kECDHE 0x00000002u |
| // SSL_kPSK is only set for plain PSK, not ECDHE_PSK. |
| #define SSL_kPSK 0x00000004u |
| #define SSL_kGENERIC 0x00000008u |
| |
| // Bits for |algorithm_auth| (server authentication). |
| #define SSL_aRSA 0x00000001u |
| #define SSL_aECDSA 0x00000002u |
| // SSL_aPSK is set for both PSK and ECDHE_PSK. |
| #define SSL_aPSK 0x00000004u |
| #define SSL_aGENERIC 0x00000008u |
| |
| #define SSL_aCERT (SSL_aRSA | SSL_aECDSA) |
| |
| // Bits for |algorithm_enc| (symmetric encryption). |
| #define SSL_3DES 0x00000001u |
| #define SSL_AES128 0x00000002u |
| #define SSL_AES256 0x00000004u |
| #define SSL_AES128GCM 0x00000008u |
| #define SSL_AES256GCM 0x00000010u |
| #define SSL_eNULL 0x00000020u |
| #define SSL_CHACHA20POLY1305 0x00000040u |
| |
| #define SSL_AES (SSL_AES128 | SSL_AES256 | SSL_AES128GCM | SSL_AES256GCM) |
| |
| // Bits for |algorithm_mac| (symmetric authentication). |
| #define SSL_SHA1 0x00000001u |
| #define SSL_SHA256 0x00000002u |
| #define SSL_SHA384 0x00000004u |
| // SSL_AEAD is set for all AEADs. |
| #define SSL_AEAD 0x00000008u |
| |
| // Bits for |algorithm_prf| (handshake digest). |
| #define SSL_HANDSHAKE_MAC_DEFAULT 0x1 |
| #define SSL_HANDSHAKE_MAC_SHA256 0x2 |
| #define SSL_HANDSHAKE_MAC_SHA384 0x4 |
| |
| // SSL_MAX_DIGEST is the number of digest types which exist. When adding a new |
| // one, update the table in ssl_cipher.c. |
| #define SSL_MAX_DIGEST 4 |
| |
| // ssl_cipher_get_evp_aead sets |*out_aead| to point to the correct EVP_AEAD |
| // object for |cipher| protocol version |version|. It sets |*out_mac_secret_len| |
| // and |*out_fixed_iv_len| to the MAC key length and fixed IV length, |
| // respectively. The MAC key length is zero except for legacy block and stream |
| // ciphers. It returns true on success and false on error. |
| bool ssl_cipher_get_evp_aead(const EVP_AEAD **out_aead, |
| size_t *out_mac_secret_len, |
| size_t *out_fixed_iv_len, const SSL_CIPHER *cipher, |
| uint16_t version, int is_dtls); |
| |
| // ssl_get_handshake_digest returns the |EVP_MD| corresponding to |version| and |
| // |cipher|. |
| const EVP_MD *ssl_get_handshake_digest(uint16_t version, |
| const SSL_CIPHER *cipher); |
| |
| // ssl_create_cipher_list evaluates |rule_str|. It sets |*out_cipher_list| to a |
| // newly-allocated |ssl_cipher_preference_list_st| containing the result. It |
| // returns true on success and false on failure. If |strict| is true, nonsense |
| // will be rejected. If false, nonsense will be silently ignored. An empty |
| // result is considered an error regardless of |strict|. |
| bool ssl_create_cipher_list( |
| struct ssl_cipher_preference_list_st **out_cipher_list, |
| const char *rule_str, bool strict); |
| |
| // ssl_cipher_get_value returns the cipher suite id of |cipher|. |
| uint16_t ssl_cipher_get_value(const SSL_CIPHER *cipher); |
| |
| // ssl_cipher_auth_mask_for_key returns the mask of cipher |algorithm_auth| |
| // values suitable for use with |key| in TLS 1.2 and below. |
| uint32_t ssl_cipher_auth_mask_for_key(const EVP_PKEY *key); |
| |
| // ssl_cipher_uses_certificate_auth returns whether |cipher| authenticates the |
| // server and, optionally, the client with a certificate. |
| bool ssl_cipher_uses_certificate_auth(const SSL_CIPHER *cipher); |
| |
| // ssl_cipher_requires_server_key_exchange returns whether |cipher| requires a |
| // ServerKeyExchange message. |
| // |
| // This function may return false while still allowing |cipher| an optional |
| // ServerKeyExchange. This is the case for plain PSK ciphers. |
| bool ssl_cipher_requires_server_key_exchange(const SSL_CIPHER *cipher); |
| |
| // ssl_cipher_get_record_split_len, for TLS 1.0 CBC mode ciphers, returns the |
| // length of an encrypted 1-byte record, for use in record-splitting. Otherwise |
| // it returns zero. |
| size_t ssl_cipher_get_record_split_len(const SSL_CIPHER *cipher); |
| |
| |
| // Transcript layer. |
| |
| // SSLTranscript maintains the handshake transcript as a combination of a |
| // buffer and running hash. |
| class SSLTranscript { |
| public: |
| SSLTranscript(); |
| ~SSLTranscript(); |
| |
| // Init initializes the handshake transcript. If called on an existing |
| // transcript, it resets the transcript and hash. It returns true on success |
| // and false on failure. |
| bool Init(); |
| |
| // InitHash initializes the handshake hash based on the PRF and contents of |
| // the handshake transcript. Subsequent calls to |Update| will update the |
| // rolling hash. It returns one on success and zero on failure. It is an error |
| // to call this function after the handshake buffer is released. |
| bool InitHash(uint16_t version, const SSL_CIPHER *cipher); |
| |
| // UpdateForHelloRetryRequest resets the rolling hash with the |
| // HelloRetryRequest construction. It returns true on success and false on |
| // failure. It is an error to call this function before the handshake buffer |
| // is released. |
| bool UpdateForHelloRetryRequest(); |
| |
| // CopyHashContext copies the hash context into |ctx| and returns true on |
| // success. |
| bool CopyHashContext(EVP_MD_CTX *ctx); |
| |
| Span<const uint8_t> buffer() { |
| return MakeConstSpan(reinterpret_cast<const uint8_t *>(buffer_->data), |
| buffer_->length); |
| } |
| |
| // FreeBuffer releases the handshake buffer. Subsequent calls to |
| // |Update| will not update the handshake buffer. |
| void FreeBuffer(); |
| |
| // DigestLen returns the length of the PRF hash. |
| size_t DigestLen() const; |
| |
| // Digest returns the PRF hash. For TLS 1.1 and below, this is |
| // |EVP_md5_sha1|. |
| const EVP_MD *Digest() const; |
| |
| // Update adds |in| to the handshake buffer and handshake hash, whichever is |
| // enabled. It returns true on success and false on failure. |
| bool Update(Span<const uint8_t> in); |
| |
| // GetHash writes the handshake hash to |out| which must have room for at |
| // least |DigestLen| bytes. On success, it returns true and sets |*out_len| to |
| // the number of bytes written. Otherwise, it returns false. |
| bool GetHash(uint8_t *out, size_t *out_len); |
| |
| // GetSSL3CertVerifyHash writes the SSL 3.0 CertificateVerify hash into the |
| // bytes pointed to by |out| and writes the number of bytes to |
| // |*out_len|. |out| must have room for |EVP_MAX_MD_SIZE| bytes. It returns |
| // one on success and zero on failure. |
| bool GetSSL3CertVerifyHash(uint8_t *out, size_t *out_len, |
| const SSL_SESSION *session, |
| uint16_t signature_algorithm); |
| |
| // GetFinishedMAC computes the MAC for the Finished message into the bytes |
| // pointed by |out| and writes the number of bytes to |*out_len|. |out| must |
| // have room for |EVP_MAX_MD_SIZE| bytes. It returns true on success and false |
| // on failure. |
| bool GetFinishedMAC(uint8_t *out, size_t *out_len, const SSL_SESSION *session, |
| bool from_server); |
| |
| private: |
| // buffer_, if non-null, contains the handshake transcript. |
| UniquePtr<BUF_MEM> buffer_; |
| // hash, if initialized with an |EVP_MD|, maintains the handshake hash. For |
| // TLS 1.1 and below, it is the SHA-1 half. |
| ScopedEVP_MD_CTX hash_; |
| // md5, if initialized with an |EVP_MD|, maintains the MD5 half of the |
| // handshake hash for TLS 1.1 and below. |
| ScopedEVP_MD_CTX md5_; |
| }; |
| |
| // tls1_prf computes the PRF function for |ssl|. It fills |out|, using |secret| |
| // as the secret and |label| as the label. |seed1| and |seed2| are concatenated |
| // to form the seed parameter. It returns true on success and false on failure. |
| bool tls1_prf(const EVP_MD *digest, Span<uint8_t> out, |
| Span<const uint8_t> secret, Span<const char> label, |
| Span<const uint8_t> seed1, Span<const uint8_t> seed2); |
| |
| |
| // Encryption layer. |
| |
| // SSLAEADContext contains information about an AEAD that is being used to |
| // encrypt an SSL connection. |
| class SSLAEADContext { |
| public: |
| SSLAEADContext(uint16_t version, bool is_dtls, const SSL_CIPHER *cipher); |
| ~SSLAEADContext(); |
| static constexpr bool kAllowUniquePtr = true; |
| |
| SSLAEADContext(const SSLAEADContext &&) = delete; |
| SSLAEADContext &operator=(const SSLAEADContext &&) = delete; |
| |
| // CreateNullCipher creates an |SSLAEADContext| for the null cipher. |
| static UniquePtr<SSLAEADContext> CreateNullCipher(bool is_dtls); |
| |
| // Create creates an |SSLAEADContext| using the supplied key material. It |
| // returns nullptr on error. Only one of |Open| or |Seal| may be used with the |
| // resulting object, depending on |direction|. |version| is the normalized |
| // protocol version, so DTLS 1.0 is represented as 0x0301, not 0xffef. |
| static UniquePtr<SSLAEADContext> Create(enum evp_aead_direction_t direction, |
| uint16_t version, int is_dtls, |
| const SSL_CIPHER *cipher, |
| Span<const uint8_t> enc_key, |
| Span<const uint8_t> mac_key, |
| Span<const uint8_t> fixed_iv); |
| |
| // SetVersionIfNullCipher sets the version the SSLAEADContext for the null |
| // cipher, to make version-specific determinations in the record layer prior |
| // to a cipher being selected. |
| void SetVersionIfNullCipher(uint16_t version); |
| |
| // ProtocolVersion returns the protocol version associated with this |
| // SSLAEADContext. It can only be called once |version_| has been set to a |
| // valid value. |
| uint16_t ProtocolVersion() const; |
| |
| // RecordVersion returns the record version that should be used with this |
| // SSLAEADContext for record construction and crypto. |
| uint16_t RecordVersion() const; |
| |
| const SSL_CIPHER *cipher() const { return cipher_; } |
| |
| // is_null_cipher returns true if this is the null cipher. |
| bool is_null_cipher() const { return !cipher_; } |
| |
| // ExplicitNonceLen returns the length of the explicit nonce. |
| size_t ExplicitNonceLen() const; |
| |
| // MaxOverhead returns the maximum overhead of calling |Seal|. |
| size_t MaxOverhead() const; |
| |
| // SuffixLen calculates the suffix length written by |SealScatter| and writes |
| // it to |*out_suffix_len|. It returns true on success and false on error. |
| // |in_len| and |extra_in_len| should equal the argument of the same names |
| // passed to |SealScatter|. |
| bool SuffixLen(size_t *out_suffix_len, size_t in_len, |
| size_t extra_in_len) const; |
| |
| // Open authenticates and decrypts |in| in-place. On success, it sets |*out| |
| // to the plaintext in |in| and returns true. Otherwise, it returns |
| // false. The output will always be |ExplicitNonceLen| bytes ahead of |in|. |
| bool Open(Span<uint8_t> *out, uint8_t type, uint16_t record_version, |
| const uint8_t seqnum[8], Span<uint8_t> in); |
| |
| // Seal encrypts and authenticates |in_len| bytes from |in| and writes the |
| // result to |out|. It returns true on success and false on error. |
| // |
| // If |in| and |out| alias then |out| + |ExplicitNonceLen| must be == |in|. |
| bool Seal(uint8_t *out, size_t *out_len, size_t max_out, uint8_t type, |
| uint16_t record_version, const uint8_t seqnum[8], const uint8_t *in, |
| size_t in_len); |
| |
| // SealScatter encrypts and authenticates |in_len| bytes from |in| and splits |
| // the result between |out_prefix|, |out| and |out_suffix|. It returns one on |
| // success and zero on error. |
| // |
| // On successful return, exactly |ExplicitNonceLen| bytes are written to |
| // |out_prefix|, |in_len| bytes to |out|, and |SuffixLen| bytes to |
| // |out_suffix|. |
| // |
| // |extra_in| may point to an additional plaintext buffer. If present, |
| // |extra_in_len| additional bytes are encrypted and authenticated, and the |
| // ciphertext is written to the beginning of |out_suffix|. |SuffixLen| should |
| // be used to size |out_suffix| accordingly. |
| // |
| // If |in| and |out| alias then |out| must be == |in|. Other arguments may not |
| // alias anything. |
| bool SealScatter(uint8_t *out_prefix, uint8_t *out, uint8_t *out_suffix, |
| uint8_t type, uint16_t record_version, |
| const uint8_t seqnum[8], const uint8_t *in, size_t in_len, |
| const uint8_t *extra_in, size_t extra_in_len); |
| |
| bool GetIV(const uint8_t **out_iv, size_t *out_iv_len) const; |
| |
| private: |
| // GetAdditionalData writes the additional data into |out| and returns the |
| // number of bytes written. |
| size_t GetAdditionalData(uint8_t out[13], uint8_t type, |
| uint16_t record_version, const uint8_t seqnum[8], |
| size_t plaintext_len); |
| |
| const SSL_CIPHER *cipher_; |
| ScopedEVP_AEAD_CTX ctx_; |
| // fixed_nonce_ contains any bytes of the nonce that are fixed for all |
| // records. |
| uint8_t fixed_nonce_[12]; |
| uint8_t fixed_nonce_len_ = 0, variable_nonce_len_ = 0; |
| // version_ is the wire version that should be used with this AEAD. |
| uint16_t version_; |
| // is_dtls_ is whether DTLS is being used with this AEAD. |
| bool is_dtls_; |
| // variable_nonce_included_in_record_ is true if the variable nonce |
| // for a record is included as a prefix before the ciphertext. |
| bool variable_nonce_included_in_record_ : 1; |
| // random_variable_nonce_ is true if the variable nonce is |
| // randomly generated, rather than derived from the sequence |
| // number. |
| bool random_variable_nonce_ : 1; |
| // omit_length_in_ad_ is true if the length should be omitted in the |
| // AEAD's ad parameter. |
| bool omit_length_in_ad_ : 1; |
| // omit_version_in_ad_ is true if the version should be omitted |
| // in the AEAD's ad parameter. |
| bool omit_version_in_ad_ : 1; |
| // omit_ad_ is true if the AEAD's ad parameter should be omitted. |
| bool omit_ad_ : 1; |
| // xor_fixed_nonce_ is true if the fixed nonce should be XOR'd into the |
| // variable nonce rather than prepended. |
| bool xor_fixed_nonce_ : 1; |
| }; |
| |
| |
| // DTLS replay bitmap. |
| |
| // DTLS1_BITMAP maintains a sliding window of 64 sequence numbers to detect |
| // replayed packets. It should be initialized by zeroing every field. |
| struct DTLS1_BITMAP { |
| // map is a bit mask of the last 64 sequence numbers. Bit |
| // |1<<i| corresponds to |max_seq_num - i|. |
| uint64_t map = 0; |
| // max_seq_num is the largest sequence number seen so far as a 64-bit |
| // integer. |
| uint64_t max_seq_num = 0; |
| }; |
| |
| |
| // Record layer. |
| |
| // ssl_record_sequence_update increments the sequence number in |seq|. It |
| // returns one on success and zero on wraparound. |
| int ssl_record_sequence_update(uint8_t *seq, size_t seq_len); |
| |
| // ssl_record_prefix_len returns the length of the prefix before the ciphertext |
| // of a record for |ssl|. |
| // |
| // TODO(davidben): Expose this as part of public API once the high-level |
| // buffer-free APIs are available. |
| size_t ssl_record_prefix_len(const SSL *ssl); |
| |
| enum ssl_open_record_t { |
| ssl_open_record_success, |
| ssl_open_record_discard, |
| ssl_open_record_partial, |
| ssl_open_record_close_notify, |
| ssl_open_record_error, |
| }; |
| |
| // tls_open_record decrypts a record from |in| in-place. |
| // |
| // If the input did not contain a complete record, it returns |
| // |ssl_open_record_partial|. It sets |*out_consumed| to the total number of |
| // bytes necessary. It is guaranteed that a successful call to |tls_open_record| |
| // will consume at least that many bytes. |
| // |
| // Otherwise, it sets |*out_consumed| to the number of bytes of input |
| // consumed. Note that input may be consumed on all return codes if a record was |
| // decrypted. |
| // |
| // On success, it returns |ssl_open_record_success|. It sets |*out_type| to the |
| // record type and |*out| to the record body in |in|. Note that |*out| may be |
| // empty. |
| // |
| // If a record was successfully processed but should be discarded, it returns |
| // |ssl_open_record_discard|. |
| // |
| // If a record was successfully processed but is a close_notify, it returns |
| // |ssl_open_record_close_notify|. |
| // |
| // On failure or fatal alert, it returns |ssl_open_record_error| and sets |
| // |*out_alert| to an alert to emit, or zero if no alert should be emitted. |
| enum ssl_open_record_t tls_open_record(SSL *ssl, uint8_t *out_type, |
| Span<uint8_t> *out, size_t *out_consumed, |
| uint8_t *out_alert, Span<uint8_t> in); |
| |
| // dtls_open_record implements |tls_open_record| for DTLS. It only returns |
| // |ssl_open_record_partial| if |in| was empty and sets |*out_consumed| to |
| // zero. The caller should read one packet and try again. |
| enum ssl_open_record_t dtls_open_record(SSL *ssl, uint8_t *out_type, |
| Span<uint8_t> *out, |
| size_t *out_consumed, |
| uint8_t *out_alert, Span<uint8_t> in); |
| |
| // ssl_seal_align_prefix_len returns the length of the prefix before the start |
| // of the bulk of the ciphertext when sealing a record with |ssl|. Callers may |
| // use this to align buffers. |
| // |
| // Note when TLS 1.0 CBC record-splitting is enabled, this includes the one byte |
| // record and is the offset into second record's ciphertext. Thus sealing a |
| // small record may result in a smaller output than this value. |
| // |
| // TODO(davidben): Is this alignment valuable? Record-splitting makes this a |
| // mess. |
| size_t ssl_seal_align_prefix_len(const SSL *ssl); |
| |
| // tls_seal_record seals a new record of type |type| and body |in| and writes it |
| // to |out|. At most |max_out| bytes will be written. It returns one on success |
| // and zero on error. If enabled, |tls_seal_record| implements TLS 1.0 CBC 1/n-1 |
| // record splitting and may write two records concatenated. |
| // |
| // For a large record, the bulk of the ciphertext will begin |
| // |ssl_seal_align_prefix_len| bytes into out. Aligning |out| appropriately may |
| // improve performance. It writes at most |in_len| + |SSL_max_seal_overhead| |
| // bytes to |out|. |
| // |
| // |in| and |out| may not alias. |
| int tls_seal_record(SSL *ssl, uint8_t *out, size_t *out_len, size_t max_out, |
| uint8_t type, const uint8_t *in, size_t in_len); |
| |
| enum dtls1_use_epoch_t { |
| dtls1_use_previous_epoch, |
| dtls1_use_current_epoch, |
| }; |
| |
| // dtls_max_seal_overhead returns the maximum overhead, in bytes, of sealing a |
| // record. |
| size_t dtls_max_seal_overhead(const SSL *ssl, enum dtls1_use_epoch_t use_epoch); |
| |
| // dtls_seal_prefix_len returns the number of bytes of prefix to reserve in |
| // front of the plaintext when sealing a record in-place. |
| size_t dtls_seal_prefix_len(const SSL *ssl, enum dtls1_use_epoch_t use_epoch); |
| |
| // dtls_seal_record implements |tls_seal_record| for DTLS. |use_epoch| selects |
| // which epoch's cipher state to use. Unlike |tls_seal_record|, |in| and |out| |
| // may alias but, if they do, |in| must be exactly |dtls_seal_prefix_len| bytes |
| // ahead of |out|. |
| int dtls_seal_record(SSL *ssl, uint8_t *out, size_t *out_len, size_t max_out, |
| uint8_t type, const uint8_t *in, size_t in_len, |
| enum dtls1_use_epoch_t use_epoch); |
| |
| // ssl_process_alert processes |in| as an alert and updates |ssl|'s shutdown |
| // state. It returns one of |ssl_open_record_discard|, |ssl_open_record_error|, |
| // |ssl_open_record_close_notify|, or |ssl_open_record_fatal_alert| as |
| // appropriate. |
| enum ssl_open_record_t ssl_process_alert(SSL *ssl, uint8_t *out_alert, |
| Span<const uint8_t> in); |
| |
| |
| // Private key operations. |
| |
| // ssl_has_private_key returns one if |ssl| has a private key |
| // configured and zero otherwise. |
| int ssl_has_private_key(const SSL *ssl); |
| |
| // ssl_private_key_* perform the corresponding operation on |
| // |SSL_PRIVATE_KEY_METHOD|. If there is a custom private key configured, they |
| // call the corresponding function or |complete| depending on whether there is a |
| // pending operation. Otherwise, they implement the operation with |
| // |EVP_PKEY|. |
| |
| enum ssl_private_key_result_t ssl_private_key_sign( |
| SSL_HANDSHAKE *hs, uint8_t *out, size_t *out_len, size_t max_out, |
| uint16_t sigalg, Span<const uint8_t> in); |
| |
| enum ssl_private_key_result_t ssl_private_key_decrypt(SSL_HANDSHAKE *hs, |
| uint8_t *out, |
| size_t *out_len, |
| size_t max_out, |
| Span<const uint8_t> in); |
| |
| // ssl_private_key_supports_signature_algorithm returns whether |hs|'s private |
| // key supports |sigalg|. |
| bool ssl_private_key_supports_signature_algorithm(SSL_HANDSHAKE *hs, |
| uint16_t sigalg); |
| |
| // ssl_public_key_verify verifies that the |signature| is valid for the public |
| // key |pkey| and input |in|, using the signature algorithm |sigalg|. |
| bool ssl_public_key_verify(SSL *ssl, Span<const uint8_t> signature, |
| uint16_t sigalg, EVP_PKEY *pkey, |
| Span<const uint8_t> in); |
| |
| |
| // Custom extensions |
| |
| } // namespace bssl |
| |
| // |SSL_CUSTOM_EXTENSION| is a structure that contains information about |
| // custom-extension callbacks. It is defined unnamespaced for compatibility with |
| // |STACK_OF(SSL_CUSTOM_EXTENSION)|. |
| typedef struct ssl_custom_extension { |
| SSL_custom_ext_add_cb add_callback; |
| void *add_arg; |
| SSL_custom_ext_free_cb free_callback; |
| SSL_custom_ext_parse_cb parse_callback; |
| void *parse_arg; |
| uint16_t value; |
| } SSL_CUSTOM_EXTENSION; |
| |
| DEFINE_STACK_OF(SSL_CUSTOM_EXTENSION) |
| |
| namespace bssl { |
| |
| void SSL_CUSTOM_EXTENSION_free(SSL_CUSTOM_EXTENSION *custom_extension); |
| |
| int custom_ext_add_clienthello(SSL_HANDSHAKE *hs, CBB *extensions); |
| int custom_ext_parse_serverhello(SSL_HANDSHAKE *hs, int *out_alert, |
| uint16_t value, const CBS *extension); |
| int custom_ext_parse_clienthello(SSL_HANDSHAKE *hs, int *out_alert, |
| uint16_t value, const CBS *extension); |
| int custom_ext_add_serverhello(SSL_HANDSHAKE *hs, CBB *extensions); |
| |
| |
| // Key shares. |
| |
| // SSLKeyShare abstracts over Diffie-Hellman-like key exchanges. |
| class SSLKeyShare { |
| public: |
| virtual ~SSLKeyShare() {} |
| static constexpr bool kAllowUniquePtr = true; |
| HAS_VIRTUAL_DESTRUCTOR |
| |
| // Create returns a SSLKeyShare instance for use with group |group_id| or |
| // nullptr on error. |
| static UniquePtr<SSLKeyShare> Create(uint16_t group_id); |
| |
| // GroupID returns the group ID. |
| virtual uint16_t GroupID() const PURE_VIRTUAL; |
| |
| // Offer generates a keypair and writes the public value to |
| // |out_public_key|. It returns true on success and false on error. |
| virtual bool Offer(CBB *out_public_key) PURE_VIRTUAL; |
| |
| // Accept performs a key exchange against the |peer_key| generated by |offer|. |
| // On success, it returns true, writes the public value to |out_public_key|, |
| // and sets |*out_secret| the shared secret. On failure, it returns false and |
| // sets |*out_alert| to an alert to send to the peer. |
| // |
| // The default implementation calls |Offer| and then |Finish|, assuming a key |
| // exchange protocol where the peers are symmetric. |
| virtual bool Accept(CBB *out_public_key, Array<uint8_t> *out_secret, |
| uint8_t *out_alert, Span<const uint8_t> peer_key); |
| |
| // Finish performs a key exchange against the |peer_key| generated by |
| // |Accept|. On success, it returns true and sets |*out_secret| to the shared |
| // secret. On failure, it returns zero and sets |*out_alert| to an alert to |
| // send to the peer. |
| virtual bool Finish(Array<uint8_t> *out_secret, uint8_t *out_alert, |
| Span<const uint8_t> peer_key) PURE_VIRTUAL; |
| }; |
| |
| // ssl_nid_to_group_id looks up the group corresponding to |nid|. On success, it |
| // sets |*out_group_id| to the group ID and returns one. Otherwise, it returns |
| // zero. |
| int ssl_nid_to_group_id(uint16_t *out_group_id, int nid); |
| |
| // ssl_name_to_group_id looks up the group corresponding to the |name| string |
| // of length |len|. On success, it sets |*out_group_id| to the group ID and |
| // returns one. Otherwise, it returns zero. |
| int ssl_name_to_group_id(uint16_t *out_group_id, const char *name, size_t len); |
| |
| |
| // Handshake messages. |
| |
| struct SSLMessage { |
| bool is_v2_hello; |
| uint8_t type; |
| CBS body; |
| // raw is the entire serialized handshake message, including the TLS or DTLS |
| // message header. |
| CBS raw; |
| }; |
| |
| // SSL_MAX_HANDSHAKE_FLIGHT is the number of messages, including |
| // ChangeCipherSpec, in the longest handshake flight. Currently this is the |
| // client's second leg in a full handshake when client certificates, NPN, and |
| // Channel ID, are all enabled. |
| #define SSL_MAX_HANDSHAKE_FLIGHT 7 |
| |
| extern const uint8_t kHelloRetryRequest[SSL3_RANDOM_SIZE]; |
| extern const uint8_t kDraftDowngradeRandom[8]; |
| |
| // ssl_max_handshake_message_len returns the maximum number of bytes permitted |
| // in a handshake message for |ssl|. |
| size_t ssl_max_handshake_message_len(const SSL *ssl); |
| |
| // tls_can_accept_handshake_data returns whether |ssl| is able to accept more |
| // data into handshake buffer. |
| bool tls_can_accept_handshake_data(const SSL *ssl, uint8_t *out_alert); |
| |
| // tls_has_unprocessed_handshake_data returns whether there is buffered |
| // handshake data that has not been consumed by |get_message|. |
| bool tls_has_unprocessed_handshake_data(const SSL *ssl); |
| |
| // dtls_has_unprocessed_handshake_data behaves like |
| // |tls_has_unprocessed_handshake_data| for DTLS. |
| bool dtls_has_unprocessed_handshake_data(const SSL *ssl); |
| |
| struct DTLS_OUTGOING_MESSAGE { |
| DTLS_OUTGOING_MESSAGE() {} |
| DTLS_OUTGOING_MESSAGE(const DTLS_OUTGOING_MESSAGE &) = delete; |
| DTLS_OUTGOING_MESSAGE &operator=(const DTLS_OUTGOING_MESSAGE &) = delete; |
| ~DTLS_OUTGOING_MESSAGE() { Clear(); } |
| |
| void Clear(); |
| |
| uint8_t *data = nullptr; |
| uint32_t len = 0; |
| uint16_t epoch = 0; |
| bool is_ccs = false; |
| }; |
| |
| // dtls_clear_outgoing_messages releases all buffered outgoing messages. |
| void dtls_clear_outgoing_messages(SSL *ssl); |
| |
| |
| // Callbacks. |
| |
| // ssl_do_info_callback calls |ssl|'s info callback, if set. |
| void ssl_do_info_callback(const SSL *ssl, int type, int value); |
| |
| // ssl_do_msg_callback calls |ssl|'s message callback, if set. |
| void ssl_do_msg_callback(SSL *ssl, int is_write, int content_type, |
| Span<const uint8_t> in); |
| |
| |
| // Transport buffers. |
| |
| class SSLBuffer { |
| public: |
| SSLBuffer() {} |
| ~SSLBuffer() { Clear(); } |
| |
| SSLBuffer(const SSLBuffer &) = delete; |
| SSLBuffer &operator=(const SSLBuffer &) = delete; |
| |
| uint8_t *data() { return buf_ + offset_; } |
| size_t size() const { return size_; } |
| bool empty() const { return size_ == 0; } |
| size_t cap() const { return cap_; } |
| |
| Span<uint8_t> span() { return MakeSpan(data(), size()); } |
| |
| Span<uint8_t> remaining() { |
| return MakeSpan(data() + size(), cap() - size()); |
| } |
| |
| // Clear releases the buffer. |
| void Clear(); |
| |
| // EnsureCap ensures the buffer has capacity at least |new_cap|, aligned such |
| // that data written after |header_len| is aligned to a |
| // |SSL3_ALIGN_PAYLOAD|-byte boundary. It returns true on success and false |
| // on error. |
| bool EnsureCap(size_t header_len, size_t new_cap); |
| |
| // DidWrite extends the buffer by |len|. The caller must have filled in to |
| // this point. |
| void DidWrite(size_t len); |
| |
| // Consume consumes |len| bytes from the front of the buffer. The memory |
| // consumed will remain valid until the next call to |DiscardConsumed| or |
| // |Clear|. |
| void Consume(size_t len); |
| |
| // DiscardConsumed discards the consumed bytes from the buffer. If the buffer |
| // is now empty, it releases memory used by it. |
| void DiscardConsumed(); |
| |
| private: |
| // buf_ is the memory allocated for this buffer. |
| uint8_t *buf_ = nullptr; |
| // offset_ is the offset into |buf_| which the buffer contents start at. |
| uint16_t offset_ = 0; |
| // size_ is the size of the buffer contents from |buf_| + |offset_|. |
| uint16_t size_ = 0; |
| // cap_ is how much memory beyond |buf_| + |offset_| is available. |
| uint16_t cap_ = 0; |
| }; |
| |
| // ssl_read_buffer_extend_to extends the read buffer to the desired length. For |
| // TLS, it reads to the end of the buffer until the buffer is |len| bytes |
| // long. For DTLS, it reads a new packet and ignores |len|. It returns one on |
| // success, zero on EOF, and a negative number on error. |
| // |
| // It is an error to call |ssl_read_buffer_extend_to| in DTLS when the buffer is |
| // non-empty. |
| int ssl_read_buffer_extend_to(SSL *ssl, size_t len); |
| |
| // ssl_handle_open_record handles the result of passing |ssl->s3->read_buffer| |
| // to a record-processing function. If |ret| is a success or if the caller |
| // should retry, it returns one and sets |*out_retry|. Otherwise, it returns <= |
| // 0. |
| int ssl_handle_open_record(SSL *ssl, bool *out_retry, ssl_open_record_t ret, |
| size_t consumed, uint8_t alert); |
| |
| // ssl_write_buffer_flush flushes the write buffer to the transport. It returns |
| // one on success and <= 0 on error. For DTLS, whether or not the write |
| // succeeds, the write buffer will be cleared. |
| int ssl_write_buffer_flush(SSL *ssl); |
| |
| |
| // Certificate functions. |
| |
| // ssl_has_certificate returns one if a certificate and private key are |
| // configured and zero otherwise. |
| int ssl_has_certificate(const SSL *ssl); |
| |
| // ssl_parse_cert_chain parses a certificate list from |cbs| in the format used |
| // by a TLS Certificate message. On success, it advances |cbs| and returns |
| // true. Otherwise, it returns false and sets |*out_alert| to an alert to send |
| // to the peer. |
| // |
| // If the list is non-empty then |*out_chain| and |*out_pubkey| will be set to |
| // the certificate chain and the leaf certificate's public key |
| // respectively. Otherwise, both will be set to nullptr. |
| // |
| // If the list is non-empty and |out_leaf_sha256| is non-NULL, it writes the |
| // SHA-256 hash of the leaf to |out_leaf_sha256|. |
| bool ssl_parse_cert_chain(uint8_t *out_alert, |
| UniquePtr<STACK_OF(CRYPTO_BUFFER)> *out_chain, |
| UniquePtr<EVP_PKEY> *out_pubkey, |
| uint8_t *out_leaf_sha256, CBS *cbs, |
| CRYPTO_BUFFER_POOL *pool); |
| |
| // ssl_add_cert_chain adds |ssl|'s certificate chain to |cbb| in the format used |
| // by a TLS Certificate message. If there is no certificate chain, it emits an |
| // empty certificate list. It returns one on success and zero on error. |
| int ssl_add_cert_chain(SSL *ssl, CBB *cbb); |
| |
| // ssl_cert_check_digital_signature_key_usage parses the DER-encoded, X.509 |
| // certificate in |in| and returns one if doesn't specify a key usage or, if it |
| // does, if it includes digitalSignature. Otherwise it pushes to the error |
| // queue and returns zero. |
| int ssl_cert_check_digital_signature_key_usage(const CBS *in); |
| |
| // ssl_cert_parse_pubkey extracts the public key from the DER-encoded, X.509 |
| // certificate in |in|. It returns an allocated |EVP_PKEY| or else returns |
| // nullptr and pushes to the error queue. |
| UniquePtr<EVP_PKEY> ssl_cert_parse_pubkey(const CBS *in); |
| |
| // ssl_parse_client_CA_list parses a CA list from |cbs| in the format used by a |
| // TLS CertificateRequest message. On success, it returns a newly-allocated |
| // |CRYPTO_BUFFER| list and advances |cbs|. Otherwise, it returns nullptr and |
| // sets |*out_alert| to an alert to send to the peer. |
| UniquePtr<STACK_OF(CRYPTO_BUFFER)> ssl_parse_client_CA_list(SSL *ssl, |
| uint8_t *out_alert, |
| CBS *cbs); |
| |
| // ssl_has_client_CAs returns there are configured CAs. |
| bool ssl_has_client_CAs(SSL *ssl); |
| |
| // ssl_add_client_CA_list adds the configured CA list to |cbb| in the format |
| // used by a TLS CertificateRequest message. It returns one on success and zero |
| // on error. |
| int ssl_add_client_CA_list(SSL *ssl, CBB *cbb); |
| |
| // ssl_check_leaf_certificate returns one if |pkey| and |leaf| are suitable as |
| // a server's leaf certificate for |hs|. Otherwise, it returns zero and pushes |
| // an error on the error queue. |
| int ssl_check_leaf_certificate(SSL_HANDSHAKE *hs, EVP_PKEY *pkey, |
| const CRYPTO_BUFFER *leaf); |
| |
| // ssl_on_certificate_selected is called once the certificate has been selected. |
| // It finalizes the certificate and initializes |hs->local_pubkey|. It returns |
| // one on success and zero on error. |
| int ssl_on_certificate_selected(SSL_HANDSHAKE *hs); |
| |
| |
| // TLS 1.3 key derivation. |
| |
| // tls13_init_key_schedule initializes the handshake hash and key derivation |
| // state, and incorporates the PSK. The cipher suite and PRF hash must have been |
| // selected at this point. It returns one on success and zero on error. |
| int tls13_init_key_schedule(SSL_HANDSHAKE *hs, const uint8_t *psk, |
| size_t psk_len); |
| |
| // tls13_init_early_key_schedule initializes the handshake hash and key |
| // derivation state from the resumption secret and incorporates the PSK to |
| // derive the early secrets. It returns one on success and zero on error. |
| int tls13_init_early_key_schedule(SSL_HANDSHAKE *hs, const uint8_t *psk, |
| size_t psk_len); |
| |
| // tls13_advance_key_schedule incorporates |in| into the key schedule with |
| // HKDF-Extract. It returns one on success and zero on error. |
| int tls13_advance_key_schedule(SSL_HANDSHAKE *hs, const uint8_t *in, |
| size_t len); |
| |
| // tls13_set_traffic_key sets the read or write traffic keys to |
| // |traffic_secret|. It returns one on success and zero on error. |
| int tls13_set_traffic_key(SSL *ssl, enum evp_aead_direction_t direction, |
| const uint8_t *traffic_secret, |
| size_t traffic_secret_len); |
| |
| // tls13_derive_early_secrets derives the early traffic secret. It returns one |
| // on success and zero on error. |
| int tls13_derive_early_secrets(SSL_HANDSHAKE *hs); |
| |
| // tls13_derive_handshake_secrets derives the handshake traffic secret. It |
| // returns one on success and zero on error. |
| int tls13_derive_handshake_secrets(SSL_HANDSHAKE *hs); |
| |
| // tls13_rotate_traffic_key derives the next read or write traffic secret. It |
| // returns one on success and zero on error. |
| int tls13_rotate_traffic_key(SSL *ssl, enum evp_aead_direction_t direction); |
| |
| // tls13_derive_application_secrets derives the initial application data traffic |
| // and exporter secrets based on the handshake transcripts and |master_secret|. |
| // It returns one on success and zero on error. |
| int tls13_derive_application_secrets(SSL_HANDSHAKE *hs); |
| |
| // tls13_derive_resumption_secret derives the |resumption_secret|. |
| int tls13_derive_resumption_secret(SSL_HANDSHAKE *hs); |
| |
| // tls13_export_keying_material provides an exporter interface to use the |
| // |exporter_secret|. |
| int tls13_export_keying_material(SSL *ssl, Span<uint8_t> out, |
| Span<const uint8_t> secret, |
| Span<const char> label, |
| Span<const uint8_t> context); |
| |
| // tls13_finished_mac calculates the MAC of the handshake transcript to verify |
| // the integrity of the Finished message, and stores the result in |out| and |
| // length in |out_len|. |is_server| is 1 if this is for the Server Finished and |
| // 0 for the Client Finished. |
| int tls13_finished_mac(SSL_HANDSHAKE *hs, uint8_t *out, |
| size_t *out_len, int is_server); |
| |
| // tls13_derive_session_psk calculates the PSK for this session based on the |
| // resumption master secret and |nonce|. It returns true on success, and false |
| // on failure. |
| bool tls13_derive_session_psk(SSL_SESSION *session, Span<const uint8_t> nonce); |
| |
| // tls13_write_psk_binder calculates the PSK binder value and replaces the last |
| // bytes of |msg| with the resulting value. It returns 1 on success, and 0 on |
| // failure. |
| int tls13_write_psk_binder(SSL_HANDSHAKE *hs, uint8_t *msg, size_t len); |
| |
| // tls13_verify_psk_binder verifies that the handshake transcript, truncated |
| // up to the binders has a valid signature using the value of |session|'s |
| // resumption secret. It returns 1 on success, and 0 on failure. |
| int tls13_verify_psk_binder(SSL_HANDSHAKE *hs, SSL_SESSION *session, |
| const SSLMessage &msg, CBS *binders); |
| |
| |
| // Handshake functions. |
| |
| enum ssl_hs_wait_t { |
| ssl_hs_error, |
| ssl_hs_ok, |
| ssl_hs_read_server_hello, |
| ssl_hs_read_message, |
| ssl_hs_flush, |
| ssl_hs_certificate_selection_pending, |
| ssl_hs_handoff, |
| ssl_hs_x509_lookup, |
| ssl_hs_channel_id_lookup, |
| ssl_hs_private_key_operation, |
| ssl_hs_pending_session, |
| ssl_hs_pending_ticket, |
| ssl_hs_early_return, |
| ssl_hs_early_data_rejected, |
| ssl_hs_read_end_of_early_data, |
| ssl_hs_read_change_cipher_spec, |
| ssl_hs_certificate_verify, |
| }; |
| |
| enum ssl_grease_index_t { |
| ssl_grease_cipher = 0, |
| ssl_grease_group, |
| ssl_grease_extension1, |
| ssl_grease_extension2, |
| ssl_grease_version, |
| ssl_grease_ticket_extension, |
| ssl_grease_last_index = ssl_grease_ticket_extension, |
| }; |
| |
| struct SSL_HANDSHAKE { |
| explicit SSL_HANDSHAKE(SSL *ssl); |
| ~SSL_HANDSHAKE(); |
| static constexpr bool kAllowUniquePtr = true; |
| |
| // ssl is a non-owning pointer to the parent |SSL| object. |
| SSL *ssl; |
| |
| // wait contains the operation the handshake is currently blocking on or |
| // |ssl_hs_ok| if none. |
| enum ssl_hs_wait_t wait = ssl_hs_ok; |
| |
| // state is the internal state for the TLS 1.2 and below handshake. Its |
| // values depend on |do_handshake| but the starting state is always zero. |
| int state = 0; |
| |
| // tls13_state is the internal state for the TLS 1.3 handshake. Its values |
| // depend on |do_handshake| but the starting state is always zero. |
| int tls13_state = 0; |
| |
| // min_version is the minimum accepted protocol version, taking account both |
| // |SSL_OP_NO_*| and |SSL_CTX_set_min_proto_version| APIs. |
| uint16_t min_version = 0; |
| |
| // max_version is the maximum accepted protocol version, taking account both |
| // |SSL_OP_NO_*| and |SSL_CTX_set_max_proto_version| APIs. |
| uint16_t max_version = 0; |
| |
| size_t hash_len = 0; |
| uint8_t secret[EVP_MAX_MD_SIZE] = {0}; |
| uint8_t early_traffic_secret[EVP_MAX_MD_SIZE] = {0}; |
| uint8_t client_handshake_secret[EVP_MAX_MD_SIZE] = {0}; |
| uint8_t server_handshake_secret[EVP_MAX_MD_SIZE] = {0}; |
| uint8_t client_traffic_secret_0[EVP_MAX_MD_SIZE] = {0}; |
| uint8_t server_traffic_secret_0[EVP_MAX_MD_SIZE] = {0}; |
| uint8_t expected_client_finished[EVP_MAX_MD_SIZE] = {0}; |
| |
| union { |
| // sent is a bitset where the bits correspond to elements of kExtensions |
| // in t1_lib.c. Each bit is set if that extension was sent in a |
| // ClientHello. It's not used by servers. |
| uint32_t sent = 0; |
| // received is a bitset, like |sent|, but is used by servers to record |
| // which extensions were received from a client. |
| uint32_t received; |
| } extensions; |
| |
| union { |
| // sent is a bitset where the bits correspond to elements of |
| // |client_custom_extensions| in the |SSL_CTX|. Each bit is set if that |
| // extension was sent in a ClientHello. It's not used by servers. |
| uint16_t sent = 0; |
| // received is a bitset, like |sent|, but is used by servers to record |
| // which custom extensions were received from a client. The bits here |
| // correspond to |server_custom_extensions|. |
| uint16_t received; |
| } custom_extensions; |
| |
| // retry_group is the group ID selected by the server in HelloRetryRequest in |
| // TLS 1.3. |
| uint16_t retry_group = 0; |
| |
| // error, if |wait| is |ssl_hs_error|, is the error the handshake failed on. |
| UniquePtr<ERR_SAVE_STATE> error; |
| |
| // key_share is the current key exchange instance. |
| UniquePtr<SSLKeyShare> key_share; |
| |
| // transcript is the current handshake transcript. |
| SSLTranscript transcript; |
| |
| // cookie is the value of the cookie received from the server, if any. |
| Array<uint8_t> cookie; |
| |
| // key_share_bytes is the value of the previously sent KeyShare extension by |
| // the client in TLS 1.3. |
| Array<uint8_t> key_share_bytes; |
| |
| // ecdh_public_key, for servers, is the key share to be sent to the client in |
| // TLS 1.3. |
| Array<uint8_t> ecdh_public_key; |
| |
| // peer_sigalgs are the signature algorithms that the peer supports. These are |
| // taken from the contents of the signature algorithms extension for a server |
| // or from the CertificateRequest for a client. |
| Array<uint16_t> peer_sigalgs; |
| |
| // peer_supported_group_list contains the supported group IDs advertised by |
| // the peer. This is only set on the server's end. The server does not |
| // advertise this extension to the client. |
| Array<uint16_t> peer_supported_group_list; |
| |
| // peer_key is the peer's ECDH key for a TLS 1.2 client. |
| Array<uint8_t> peer_key; |
| |
| // negotiated_token_binding_version is used by a server to store the |
| // on-the-wire encoding of the Token Binding protocol version to advertise in |
| // the ServerHello/EncryptedExtensions if the Token Binding extension is to be |
| // sent. |
| uint16_t negotiated_token_binding_version; |
| |
| // server_params, in a TLS 1.2 server, stores the ServerKeyExchange |
| // parameters. It has client and server randoms prepended for signing |
| // convenience. |
| Array<uint8_t> server_params; |
| |
| // peer_psk_identity_hint, on the client, is the psk_identity_hint sent by the |
| // server when using a TLS 1.2 PSK key exchange. |
| UniquePtr<char> peer_psk_identity_hint; |
| |
| // ca_names, on the client, contains the list of CAs received in a |
| // CertificateRequest message. |
| UniquePtr<STACK_OF(CRYPTO_BUFFER)> ca_names; |
| |
| // cached_x509_ca_names contains a cache of parsed versions of the elements of |
| // |ca_names|. This pointer is left non-owning so only |
| // |ssl_crypto_x509_method| needs to link against crypto/x509. |
| STACK_OF(X509_NAME) *cached_x509_ca_names = nullptr; |
| |
| // certificate_types, on the client, contains the set of certificate types |
| // received in a CertificateRequest message. |
| Array<uint8_t> certificate_types; |
| |
| // local_pubkey is the public key we are authenticating as. |
| UniquePtr<EVP_PKEY> local_pubkey; |
| |
| // peer_pubkey is the public key parsed from the peer's leaf certificate. |
| UniquePtr<EVP_PKEY> peer_pubkey; |
| |
| // new_session is the new mutable session being established by the current |
| // handshake. It should not be cached. |
| UniquePtr<SSL_SESSION> new_session; |
| |
| // early_session is the session corresponding to the current 0-RTT state on |
| // the client if |in_early_data| is true. |
| UniquePtr<SSL_SESSION> early_session; |
| |
| // new_cipher is the cipher being negotiated in this handshake. |
| const SSL_CIPHER *new_cipher = nullptr; |
| |
| // key_block is the record-layer key block for TLS 1.2 and earlier. |
| Array<uint8_t> key_block; |
| |
| // scts_requested is true if the SCT extension is in the ClientHello. |
| bool scts_requested:1; |
| |
| // needs_psk_binder is true if the ClientHello has a placeholder PSK binder to |
| // be filled in. |
| bool needs_psk_binder:1; |
| |
| bool received_hello_retry_request:1; |
| bool sent_hello_retry_request:1; |
| |
| bool received_custom_extension:1; |
| |
| // handshake_finalized is true once the handshake has completed, at which |
| // point accessors should use the established state. |
| bool handshake_finalized:1; |
| |
| // accept_psk_mode stores whether the client's PSK mode is compatible with our |
| // preferences. |
| bool accept_psk_mode:1; |
| |
| // cert_request is true if a client certificate was requested. |
| bool cert_request:1; |
| |
| // certificate_status_expected is true if OCSP stapling was negotiated and the |
| // server is expected to send a CertificateStatus message. (This is used on |
| // both the client and server sides.) |
| bool certificate_status_expected:1; |
| |
| // ocsp_stapling_requested is true if a client requested OCSP stapling. |
| bool ocsp_stapling_requested:1; |
| |
| // should_ack_sni is used by a server and indicates that the SNI extension |
| // should be echoed in the ServerHello. |
| bool should_ack_sni:1; |
| |
| // in_false_start is true if there is a pending client handshake in False |
| // Start. The client may write data at this point. |
| bool in_false_start:1; |
| |
| // in_early_data is true if there is a pending handshake that has progressed |
| // enough to send and receive early data. |
| bool in_early_data:1; |
| |
| // early_data_offered is true if the client sent the early_data extension. |
| bool early_data_offered:1; |
| |
| // can_early_read is true if application data may be read at this point in the |
| // handshake. |
| bool can_early_read:1; |
| |
| // can_early_write is true if application data may be written at this point in |
| // the handshake. |
| bool can_early_write:1; |
| |
| // next_proto_neg_seen is one of NPN was negotiated. |
| bool next_proto_neg_seen:1; |
| |
| // ticket_expected is true if a TLS 1.2 NewSessionTicket message is to be sent |
| // or received. |
| bool ticket_expected:1; |
| |
| // extended_master_secret is true if the extended master secret extension is |
| // negotiated in this handshake. |
| bool extended_master_secret:1; |
| |
| // pending_private_key_op is true if there is a pending private key operation |
| // in progress. |
| bool pending_private_key_op:1; |
| |
| // grease_seeded is true if |grease_seed| has been initialized. |
| bool grease_seeded:1; |
| |
| // client_version is the value sent or received in the ClientHello version. |
| uint16_t client_version = 0; |
| |
| // early_data_read is the amount of early data that has been read by the |
| // record layer. |
| uint16_t early_data_read = 0; |
| |
| // early_data_written is the amount of early data that has been written by the |
| // record layer. |
| uint16_t early_data_written = 0; |
| |
| // session_id is the session ID in the ClientHello, used for the experimental |
| // TLS 1.3 variant. |
| uint8_t session_id[SSL_MAX_SSL_SESSION_ID_LENGTH] = {0}; |
| uint8_t session_id_len = 0; |
| |
| // grease_seed is the entropy for GREASE values. It is valid if |
| // |grease_seeded| is true. |
| uint8_t grease_seed[ssl_grease_last_index + 1] = {0}; |
| }; |
| |
| UniquePtr<SSL_HANDSHAKE> ssl_handshake_new(SSL *ssl); |
| |
| // ssl_check_message_type checks if |msg| has type |type|. If so it returns |
| // one. Otherwise, it sends an alert and returns zero. |
| bool ssl_check_message_type(SSL *ssl, const SSLMessage &msg, int type); |
| |
| // ssl_run_handshake runs the TLS handshake. It returns one on success and <= 0 |
| // on error. It sets |out_early_return| to one if we've completed the handshake |
| // early. |
| int ssl_run_handshake(SSL_HANDSHAKE *hs, bool *out_early_return); |
| |
| // The following are implementations of |do_handshake| for the client and |
| // server. |
| enum ssl_hs_wait_t ssl_client_handshake(SSL_HANDSHAKE *hs); |
| enum ssl_hs_wait_t ssl_server_handshake(SSL_HANDSHAKE *hs); |
| enum ssl_hs_wait_t tls13_client_handshake(SSL_HANDSHAKE *hs); |
| enum ssl_hs_wait_t tls13_server_handshake(SSL_HANDSHAKE *hs); |
| |
| // The following functions return human-readable representations of the TLS |
| // handshake states for debugging. |
| const char *ssl_client_handshake_state(SSL_HANDSHAKE *hs); |
| const char *ssl_server_handshake_state(SSL_HANDSHAKE *hs); |
| const char *tls13_client_handshake_state(SSL_HANDSHAKE *hs); |
| const char *tls13_server_handshake_state(SSL_HANDSHAKE *hs); |
| |
| // tls13_post_handshake processes a post-handshake message. It returns one on |
| // success and zero on failure. |
| int tls13_post_handshake(SSL *ssl, const SSLMessage &msg); |
| |
| int tls13_process_certificate(SSL_HANDSHAKE *hs, const SSLMessage &msg, |
| int allow_anonymous); |
| int tls13_process_certificate_verify(SSL_HANDSHAKE *hs, const SSLMessage &msg); |
| |
| // tls13_process_finished processes |msg| as a Finished message from the |
| // peer. If |use_saved_value| is one, the verify_data is compared against |
| // |hs->expected_client_finished| rather than computed fresh. |
| int tls13_process_finished(SSL_HANDSHAKE *hs, const SSLMessage &msg, |
| int use_saved_value); |
| |
| int tls13_add_certificate(SSL_HANDSHAKE *hs); |
| |
| // tls13_add_certificate_verify adds a TLS 1.3 CertificateVerify message to the |
| // handshake. If it returns |ssl_private_key_retry|, it should be called again |
| // to retry when the signing operation is completed. |
| enum ssl_private_key_result_t tls13_add_certificate_verify(SSL_HANDSHAKE *hs); |
| |
| int tls13_add_finished(SSL_HANDSHAKE *hs); |
| int tls13_process_new_session_ticket(SSL *ssl, const SSLMessage &msg); |
| |
| bool ssl_ext_key_share_parse_serverhello(SSL_HANDSHAKE *hs, |
| Array<uint8_t> *out_secret, |
| uint8_t *out_alert, CBS *contents); |
| bool ssl_ext_key_share_parse_clienthello(SSL_HANDSHAKE *hs, bool *out_found, |
| Array<uint8_t> *out_secret, |
| uint8_t *out_alert, CBS *contents); |
| bool ssl_ext_key_share_add_serverhello(SSL_HANDSHAKE *hs, CBB *out); |
| |
| bool ssl_ext_pre_shared_key_parse_serverhello(SSL_HANDSHAKE *hs, |
| uint8_t *out_alert, |
| CBS *contents); |
| bool ssl_ext_pre_shared_key_parse_clienthello( |
| SSL_HANDSHAKE *hs, CBS *out_ticket, CBS *out_binders, |
| uint32_t *out_obfuscated_ticket_age, uint8_t *out_alert, CBS *contents); |
| bool ssl_ext_pre_shared_key_add_serverhello(SSL_HANDSHAKE *hs, CBB *out); |
| |
| // ssl_is_sct_list_valid does a shallow parse of the SCT list in |contents| and |
| // returns one iff it's valid. |
| int ssl_is_sct_list_valid(const CBS *contents); |
| |
| int ssl_write_client_hello(SSL_HANDSHAKE *hs); |
| |
| enum ssl_cert_verify_context_t { |
| ssl_cert_verify_server, |
| ssl_cert_verify_client, |
| ssl_cert_verify_channel_id, |
| }; |
| |
| // tls13_get_cert_verify_signature_input generates the message to be signed for |
| // TLS 1.3's CertificateVerify message. |cert_verify_context| determines the |
| // type of signature. It sets |*out| to a newly allocated buffer containing the |
| // result. This function returns true on success and false on failure. |
| bool tls13_get_cert_verify_signature_input( |
| SSL_HANDSHAKE *hs, Array<uint8_t> *out, |
| enum ssl_cert_verify_context_t cert_verify_context); |
| |
| // ssl_is_alpn_protocol_allowed returns whether |protocol| is a valid server |
| // selection for |ssl|'s client preferences. |
| bool ssl_is_alpn_protocol_allowed(const SSL *ssl, Span<const uint8_t> protocol); |
| |
| // ssl_negotiate_alpn negotiates the ALPN extension, if applicable. It returns |
| // true on successful negotiation or if nothing was negotiated. It returns false |
| // and sets |*out_alert| to an alert on error. |
| bool ssl_negotiate_alpn(SSL_HANDSHAKE *hs, uint8_t *out_alert, |
| const SSL_CLIENT_HELLO *client_hello); |
| |
| struct SSL_EXTENSION_TYPE { |
| uint16_t type; |
| bool *out_present; |
| CBS *out_data; |
| }; |
| |
| // ssl_parse_extensions parses a TLS extensions block out of |cbs| and advances |
| // it. It writes the parsed extensions to pointers denoted by |ext_types|. On |
| // success, it fills in the |out_present| and |out_data| fields and returns one. |
| // Otherwise, it sets |*out_alert| to an alert to send and returns zero. Unknown |
| // extensions are rejected unless |ignore_unknown| is 1. |
| int ssl_parse_extensions(const CBS *cbs, uint8_t *out_alert, |
| const SSL_EXTENSION_TYPE *ext_types, |
| size_t num_ext_types, int ignore_unknown); |
| |
| // ssl_verify_peer_cert verifies the peer certificate for |hs|. |
| enum ssl_verify_result_t ssl_verify_peer_cert(SSL_HANDSHAKE *hs); |
| |
| enum ssl_hs_wait_t ssl_get_finished(SSL_HANDSHAKE *hs); |
| bool ssl_send_finished(SSL_HANDSHAKE *hs); |
| bool ssl_output_cert_chain(SSL *ssl); |
| |
| |
| // SSLKEYLOGFILE functions. |
| |
| // ssl_log_secret logs |secret| with label |label|, if logging is enabled for |
| // |ssl|. It returns one on success and zero on failure. |
| int ssl_log_secret(const SSL *ssl, const char *label, const uint8_t *secret, |
| size_t secret_len); |
| |
| |
| // ClientHello functions. |
| |
| int ssl_client_hello_init(SSL *ssl, SSL_CLIENT_HELLO *out, |
| const SSLMessage &msg); |
| |
| int ssl_client_hello_get_extension(const SSL_CLIENT_HELLO *client_hello, |
| CBS *out, uint16_t extension_type); |
| |
| int ssl_client_cipher_list_contains_cipher(const SSL_CLIENT_HELLO *client_hello, |
| uint16_t id); |
| |
| |
| // GREASE. |
| |
| // ssl_get_grease_value returns a GREASE value for |hs|. For a given |
| // connection, the values for each index will be deterministic. This allows the |
| // same ClientHello be sent twice for a HelloRetryRequest or the same group be |
| // advertised in both supported_groups and key_shares. |
| uint16_t ssl_get_grease_value(SSL_HANDSHAKE *hs, enum ssl_grease_index_t index); |
| |
| |
| // Signature algorithms. |
| |
| // tls1_parse_peer_sigalgs parses |sigalgs| as the list of peer signature |
| // algorithms and saves them on |hs|. It returns true on success and false on |
| // error. |
| bool tls1_parse_peer_sigalgs(SSL_HANDSHAKE *hs, const CBS *sigalgs); |
| |
| // tls1_get_legacy_signature_algorithm sets |*out| to the signature algorithm |
| // that should be used with |pkey| in TLS 1.1 and earlier. It returns true on |
| // success and false if |pkey| may not be used at those versions. |
| bool tls1_get_legacy_signature_algorithm(uint16_t *out, const EVP_PKEY *pkey); |
| |
| // tls1_choose_signature_algorithm sets |*out| to a signature algorithm for use |
| // with |hs|'s private key based on the peer's preferences and the algorithms |
| // supported. It returns true on success and false on error. |
| bool tls1_choose_signature_algorithm(SSL_HANDSHAKE *hs, uint16_t *out); |
| |
| // tls12_add_verify_sigalgs adds the signature algorithms acceptable for the |
| // peer signature to |out|. It returns true on success and false on error. |
| bool tls12_add_verify_sigalgs(const SSL *ssl, CBB *out); |
| |
| // tls12_check_peer_sigalg checks if |sigalg| is acceptable for the peer |
| // signature. It returns true on success and false on error, setting |
| // |*out_alert| to an alert to send. |
| bool tls12_check_peer_sigalg(const SSL *ssl, uint8_t *out_alert, |
| uint16_t sigalg); |
| |
| |
| // Underdocumented functions. |
| // |
| // Functions below here haven't been touched up and may be underdocumented. |
| |
| #define TLSEXT_CHANNEL_ID_SIZE 128 |
| |
| // From RFC4492, used in encoding the curve type in ECParameters |
| #define NAMED_CURVE_TYPE 3 |
| |
| struct CERT { |
| EVP_PKEY *privatekey; |
| |
| // chain contains the certificate chain, with the leaf at the beginning. The |
| // first element of |chain| may be NULL to indicate that the leaf certificate |
| // has not yet been set. |
| // If |chain| != NULL -> len(chain) >= 1 |
| // If |chain[0]| == NULL -> len(chain) >= 2. |
| // |chain[1..]| != NULL |
| STACK_OF(CRYPTO_BUFFER) *chain; |
| |
| // x509_chain may contain a parsed copy of |chain[1..]|. This is only used as |
| // a cache in order to implement “get0” functions that return a non-owning |
| // pointer to the certificate chain. |
| STACK_OF(X509) *x509_chain; |
| |
| // x509_leaf may contain a parsed copy of the first element of |chain|. This |
| // is only used as a cache in order to implement “get0” functions that return |
| // a non-owning pointer to the certificate chain. |
| X509 *x509_leaf; |
| |
| // x509_stash contains the last |X509| object append to the chain. This is a |
| // workaround for some third-party code that continue to use an |X509| object |
| // even after passing ownership with an “add0” function. |
| X509 *x509_stash; |
| |
| // key_method, if non-NULL, is a set of callbacks to call for private key |
| // operations. |
| const SSL_PRIVATE_KEY_METHOD *key_method; |
| |
| // x509_method contains pointers to functions that might deal with |X509| |
| // compatibility, or might be a no-op, depending on the application. |
| const SSL_X509_METHOD *x509_method; |
| |
| // sigalgs, if non-NULL, is the set of signature algorithms supported by |
| // |privatekey| in decreasing order of preference. |
| uint16_t *sigalgs; |
| size_t num_sigalgs; |
| |
| // Certificate setup callback: if set is called whenever a |
| // certificate may be required (client or server). the callback |
| // can then examine any appropriate parameters and setup any |
| // certificates required. This allows advanced applications |
| // to select certificates on the fly: for example based on |
| // supported signature algorithms or curves. |
| int (*cert_cb)(SSL *ssl, void *arg); |
| void *cert_cb_arg; |
| |
| // Optional X509_STORE for certificate validation. If NULL the parent SSL_CTX |
| // store is used instead. |
| X509_STORE *verify_store; |
| |
| // Signed certificate timestamp list to be sent to the client, if requested |
| CRYPTO_BUFFER *signed_cert_timestamp_list; |
| |
| // OCSP response to be sent to the client, if requested. |
| CRYPTO_BUFFER *ocsp_response; |
| |
| // sid_ctx partitions the session space within a shared session cache or |
| // ticket key. Only sessions with a matching value will be accepted. |
| uint8_t sid_ctx_length; |
| uint8_t sid_ctx[SSL_MAX_SID_CTX_LENGTH]; |
| |
| // If enable_early_data is true, early data can be sent and accepted. |
| bool enable_early_data:1; |
| }; |
| |
| // |SSL_PROTOCOL_METHOD| abstracts between TLS and DTLS. |
| struct SSL_PROTOCOL_METHOD { |
| bool is_dtls; |
| bool (*ssl_new)(SSL *ssl); |
| void (*ssl_free)(SSL *ssl); |
| // get_message sets |*out| to the current handshake message and returns true |
| // if one has been received. It returns false if more input is needed. |
| bool (*get_message)(SSL *ssl, SSLMessage *out); |
| // next_message is called to release the current handshake message. |
| void (*next_message)(SSL *ssl); |
| // Use the |ssl_open_handshake| wrapper. |
| ssl_open_record_t (*open_handshake)(SSL *ssl, size_t *out_consumed, |
| uint8_t *out_alert, Span<uint8_t> in); |
| // Use the |ssl_open_change_cipher_spec| wrapper. |
| ssl_open_record_t (*open_change_cipher_spec)(SSL *ssl, size_t *out_consumed, |
| uint8_t *out_alert, |
| Span<uint8_t> in); |
| // Use the |ssl_open_app_data| wrapper. |
| ssl_open_record_t (*open_app_data)(SSL *ssl, Span<uint8_t> *out, |
| size_t *out_consumed, uint8_t *out_alert, |
| Span<uint8_t> in); |
| int (*write_app_data)(SSL *ssl, bool *out_needs_handshake, const uint8_t *buf, |
| int len); |
| int (*dispatch_alert)(SSL *ssl); |
| // init_message begins a new handshake message of type |type|. |cbb| is the |
| // root CBB to be passed into |finish_message|. |*body| is set to a child CBB |
| // the caller should write to. It returns true on success and false on error. |
| bool (*init_message)(SSL *ssl, CBB *cbb, CBB *body, uint8_t type); |
| // finish_message finishes a handshake message. It sets |*out_msg| to the |
| // serialized message. It returns true on success and false on error. |
| bool (*finish_message)(SSL *ssl, CBB *cbb, bssl::Array<uint8_t> *out_msg); |
| // add_message adds a handshake message to the pending flight. It returns |
| // true on success and false on error. |
| bool (*add_message)(SSL *ssl, bssl::Array<uint8_t> msg); |
| // add_change_cipher_spec adds a ChangeCipherSpec record to the pending |
| // flight. It returns true on success and false on error. |
| bool (*add_change_cipher_spec)(SSL *ssl); |
| // add_alert adds an alert to the pending flight. It returns true on success |
| // and false on error. |
| bool (*add_alert)(SSL *ssl, uint8_t level, uint8_t desc); |
| // flush_flight flushes the pending flight to the transport. It returns one on |
| // success and <= 0 on error. |
| int (*flush_flight)(SSL *ssl); |
| // on_handshake_complete is called when the handshake is complete. |
| void (*on_handshake_complete)(SSL *ssl); |
| // set_read_state sets |ssl|'s read cipher state to |aead_ctx|. It returns |
| // true on success and false if changing the read state is forbidden at this |
| // point. |
| bool (*set_read_state)(SSL *ssl, UniquePtr<SSLAEADContext> aead_ctx); |
| // set_write_state sets |ssl|'s write cipher state to |aead_ctx|. It returns |
| // true on success and false if changing the write state is forbidden at this |
| // point. |
| bool (*set_write_state)(SSL *ssl, UniquePtr<SSLAEADContext> aead_ctx); |
| }; |
| |
| // The following wrappers call |open_*| but handle |read_shutdown| correctly. |
| |
| // ssl_open_handshake processes a record from |in| for reading a handshake |
| // message. |
| ssl_open_record_t ssl_open_handshake(SSL *ssl, size_t *out_consumed, |
| uint8_t *out_alert, Span<uint8_t> in); |
| |
| // ssl_open_change_cipher_spec processes a record from |in| for reading a |
| // ChangeCipherSpec. |
| ssl_open_record_t ssl_open_change_cipher_spec(SSL *ssl, size_t *out_consumed, |
| uint8_t *out_alert, |
| Span<uint8_t> in); |
| |
| // ssl_open_app_data processes a record from |in| for reading application data. |
| // On success, it returns |ssl_open_record_success| and sets |*out| to the |
| // input. If it encounters a post-handshake message, it returns |
| // |ssl_open_record_discard|. The caller should then retry, after processing any |
| // messages received with |get_message|. |
| ssl_open_record_t ssl_open_app_data(SSL *ssl, Span<uint8_t> *out, |
| size_t *out_consumed, uint8_t *out_alert, |
| Span<uint8_t> in); |
| |
| // ssl_crypto_x509_method provides the |SSL_X509_METHOD| functions using |
| // crypto/x509. |
| extern const SSL_X509_METHOD ssl_crypto_x509_method; |
| |
| // ssl_noop_x509_method provides the |SSL_X509_METHOD| functions that avoid |
| // crypto/x509. |
| extern const SSL_X509_METHOD ssl_noop_x509_method; |
| |
| // ssl_cipher_preference_list_st contains a list of SSL_CIPHERs with |
| // equal-preference groups. For TLS clients, the groups are moot because the |
| // server picks the cipher and groups cannot be expressed on the wire. However, |
| // for servers, the equal-preference groups allow the client's preferences to |
| // be partially respected. (This only has an effect with |
| // SSL_OP_CIPHER_SERVER_PREFERENCE). |
| // |
| // The equal-preference groups are expressed by grouping SSL_CIPHERs together. |
| // All elements of a group have the same priority: no ordering is expressed |
| // within a group. |
| // |
| // The values in |ciphers| are in one-to-one correspondence with |
| // |in_group_flags|. (That is, sk_SSL_CIPHER_num(ciphers) is the number of |
| // bytes in |in_group_flags|.) The bytes in |in_group_flags| are either 1, to |
| // indicate that the corresponding SSL_CIPHER is not the last element of a |
| // group, or 0 to indicate that it is. |
| // |
| // For example, if |in_group_flags| contains all zeros then that indicates a |
| // traditional, fully-ordered preference. Every SSL_CIPHER is the last element |
| // of the group (i.e. they are all in a one-element group). |
| // |
| // For a more complex example, consider: |
| // ciphers: A B C D E F |
| // in_group_flags: 1 1 0 0 1 0 |
| // |
| // That would express the following, order: |
| // |
| // A E |
| // B -> D -> F |
| // C |
| struct ssl_cipher_preference_list_st { |
| STACK_OF(SSL_CIPHER) *ciphers; |
| uint8_t *in_group_flags; |
| }; |
| |
| struct tlsext_ticket_key { |
| static constexpr bool kAllowUniquePtr = true; |
| |
| uint8_t name[SSL_TICKET_KEY_NAME_LEN]; |
| uint8_t hmac_key[16]; |
| uint8_t aes_key[16]; |
| // next_rotation_tv_sec is the time (in seconds from the epoch) when the |
| // current key should be superseded by a new key, or the time when a previous |
| // key should be dropped. If zero, then the key should not be automatically |
| // rotated. |
| uint64_t next_rotation_tv_sec; |
| }; |
| |
| } // namespace bssl |
| |
| DECLARE_LHASH_OF(SSL_SESSION) |
| |
| namespace bssl { |
| |
| // SSLContext backs the public |SSL_CTX| type. Due to compatibility constraints, |
| // it is a base class for |ssl_ctx_st|. |
| struct SSLContext { |
| const SSL_PROTOCOL_METHOD *method; |
| const SSL_X509_METHOD *x509_method; |
| |
| // lock is used to protect various operations on this object. |
| CRYPTO_MUTEX lock; |
| |
| // conf_max_version is the maximum acceptable protocol version configured by |
| // |SSL_CTX_set_max_proto_version|. Note this version is normalized in DTLS |
| // and is further constrainted by |SSL_OP_NO_*|. |
| uint16_t conf_max_version; |
| |
| // conf_min_version is the minimum acceptable protocol version configured by |
| // |SSL_CTX_set_min_proto_version|. Note this version is normalized in DTLS |
| // and is further constrainted by |SSL_OP_NO_*|. |
| uint16_t conf_min_version; |
| |
| // tls13_variant is the variant of TLS 1.3 we are using for this |
| // configuration. |
| enum tls13_variant_t tls13_variant; |
| |
| struct ssl_cipher_preference_list_st *cipher_list; |
| |
| X509_STORE *cert_store; |
| LHASH_OF(SSL_SESSION) *sessions; |
| // Most session-ids that will be cached, default is |
| // SSL_SESSION_CACHE_MAX_SIZE_DEFAULT. 0 is unlimited. |
| unsigned long session_cache_size; |
| SSL_SESSION *session_cache_head; |
| SSL_SESSION *session_cache_tail; |
| |
| // handshakes_since_cache_flush is the number of successful handshakes since |
| // the last cache flush. |
| int handshakes_since_cache_flush; |
| |
| // This can have one of 2 values, ored together, |
| // SSL_SESS_CACHE_CLIENT, |
| // SSL_SESS_CACHE_SERVER, |
| // Default is SSL_SESSION_CACHE_SERVER, which means only |
| // SSL_accept which cache SSL_SESSIONS. |
| int session_cache_mode; |
| |
| // session_timeout is the default lifetime for new sessions in TLS 1.2 and |
| // earlier, in seconds. |
| uint32_t session_timeout; |
| |
| // session_psk_dhe_timeout is the default lifetime for new sessions in TLS |
| // 1.3, in seconds. |
| uint32_t session_psk_dhe_timeout; |
| |
| // If this callback is not null, it will be called each time a session id is |
| // added to the cache. If this function returns 1, it means that the |
| // callback will do a SSL_SESSION_free() when it has finished using it. |
| // Otherwise, on 0, it means the callback has finished with it. If |
| // remove_session_cb is not null, it will be called when a session-id is |
| // removed from the cache. After the call, OpenSSL will SSL_SESSION_free() |
| // it. |
| int (*new_session_cb)(SSL *ssl, SSL_SESSION *sess); |
| void (*remove_session_cb)(SSL_CTX *ctx, SSL_SESSION *sess); |
| SSL_SESSION *(*get_session_cb)(SSL *ssl, const uint8_t *data, int len, |
| int *copy); |
| SSL_SESSION *(*get_session_cb_legacy)(SSL *ssl, uint8_t *data, int len, |
| int *copy); |
| |
| CRYPTO_refcount_t references; |
| |
| // if defined, these override the X509_verify_cert() calls |
| int (*app_verify_callback)(X509_STORE_CTX *store_ctx, void *arg); |
| void *app_verify_arg; |
| |
| enum ssl_verify_result_t (*custom_verify_callback)(SSL *ssl, |
| uint8_t *out_alert); |
| |
| // Default password callback. |
| pem_password_cb *default_passwd_callback; |
| |
| // Default password callback user data. |
| void *default_passwd_callback_userdata; |
| |
| // get client cert callback |
| int (*client_cert_cb)(SSL *ssl, X509 **out_x509, EVP_PKEY **out_pkey); |
| |
| // get channel id callback |
| void (*channel_id_cb)(SSL *ssl, EVP_PKEY **out_pkey); |
| |
| CRYPTO_EX_DATA ex_data; |
| |
| // custom_*_extensions stores any callback sets for custom extensions. Note |
| // that these pointers will be NULL if the stack would otherwise be empty. |
| STACK_OF(SSL_CUSTOM_EXTENSION) *client_custom_extensions; |
| STACK_OF(SSL_CUSTOM_EXTENSION) *server_custom_extensions; |
| |
| // Default values used when no per-SSL value is defined follow |
| |
| void (*info_callback)(const SSL *ssl, int type, int value); |
| |
| // what we put in client cert requests |
| STACK_OF(CRYPTO_BUFFER) *client_CA; |
| |
| // cached_x509_client_CA is a cache of parsed versions of the elements of |
| // |client_CA|. |
| STACK_OF(X509_NAME) *cached_x509_client_CA; |
| |
| |
| // Default values to use in SSL structures follow (these are copied by |
| // SSL_new) |
| |
| uint32_t options; |
| uint32_t mode; |
| uint32_t max_cert_list; |
| |
| CERT *cert; |
| |
| // callback that allows applications to peek at protocol messages |
| void (*msg_callback)(int write_p, int version, int content_type, |
| const void *buf, size_t len, SSL *ssl, void *arg); |
| void *msg_callback_arg; |
| |
| int verify_mode; |
| int (*default_verify_callback)( |
| int ok, X509_STORE_CTX *ctx); // called 'verify_callback' in the SSL |
| |
| X509_VERIFY_PARAM *param; |
| |
| // select_certificate_cb is called before most ClientHello processing and |
| // before the decision whether to resume a session is made. See |
| // |ssl_select_cert_result_t| for details of the return values. |
| enum ssl_select_cert_result_t (*select_certificate_cb)( |
| const SSL_CLIENT_HELLO *); |
| |
| // dos_protection_cb is called once the resumption decision for a ClientHello |
| // has been made. It returns one to continue the handshake or zero to |
| // abort. |
| int (*dos_protection_cb) (const SSL_CLIENT_HELLO *); |
| |
| // Maximum amount of data to send in one fragment. actual record size can be |
| // more than this due to padding and MAC overheads. |
| uint16_t max_send_fragment; |
| |
| // TLS extensions servername callback |
| int (*tlsext_servername_callback)(SSL *, int *, void *); |
| void *tlsext_servername_arg; |
| |
| // RFC 4507 session ticket keys. |tlsext_ticket_key_current| may be NULL |
| // before the first handshake and |tlsext_ticket_key_prev| may be NULL at any |
| // time. Automatically generated ticket keys are rotated as needed at |
| // handshake time. Hence, all access must be synchronized through |lock|. |
| struct tlsext_ticket_key *tlsext_ticket_key_current; |
| struct tlsext_ticket_key *tlsext_ticket_key_prev; |
| |
| // Callback to support customisation of ticket key setting |
| int (*tlsext_ticket_key_cb)(SSL *ssl, uint8_t *name, uint8_t *iv, |
| EVP_CIPHER_CTX *ectx, HMAC_CTX *hctx, int enc); |
| |
| // Server-only: psk_identity_hint is the default identity hint to send in |
| // PSK-based key exchanges. |
| char *psk_identity_hint; |
| |
| unsigned int (*psk_client_callback)(SSL *ssl, const char *hint, |
| char *identity, |
| unsigned int max_identity_len, |
| uint8_t *psk, unsigned int max_psk_len); |
| unsigned int (*psk_server_callback)(SSL *ssl, const char *identity, |
| uint8_t *psk, unsigned int max_psk_len); |
| |
| |
| // Next protocol negotiation information |
| // (for experimental NPN extension). |
| |
| // For a server, this contains a callback function by which the set of |
| // advertised protocols can be provided. |
| int (*next_protos_advertised_cb)(SSL *ssl, const uint8_t **out, |
| unsigned *out_len, void *arg); |
| void *next_protos_advertised_cb_arg; |
| // For a client, this contains a callback function that selects the |
| // next protocol from the list provided by the server. |
| int (*next_proto_select_cb)(SSL *ssl, uint8_t **out, uint8_t *out_len, |
| const uint8_t *in, unsigned in_len, void *arg); |
| void *next_proto_select_cb_arg; |
| |
| // ALPN information |
| // (we are in the process of transitioning from NPN to ALPN.) |
| |
| // For a server, this contains a callback function that allows the |
| // server to select the protocol for the connection. |
| // out: on successful return, this must point to the raw protocol |
| // name (without the length prefix). |
| // outlen: on successful return, this contains the length of |*out|. |
| // in: points to the client's list of supported protocols in |
| // wire-format. |
| // inlen: the length of |in|. |
| int (*alpn_select_cb)(SSL *ssl, const uint8_t **out, uint8_t *out_len, |
| const uint8_t *in, unsigned in_len, void *arg); |
| void *alpn_select_cb_arg; |
| |
| // For a client, this contains the list of supported protocols in wire |
| // format. |
| uint8_t *alpn_client_proto_list; |
| unsigned alpn_client_proto_list_len; |
| |
| // SRTP profiles we are willing to do from RFC 5764 |
| STACK_OF(SRTP_PROTECTION_PROFILE) *srtp_profiles; |
| |
| // Supported group values inherited by SSL structure |
| size_t supported_group_list_len; |
| uint16_t *supported_group_list; |
| |
| // The client's Channel ID private key. |
| EVP_PKEY *tlsext_channel_id_private; |
| |
| // keylog_callback, if not NULL, is the key logging callback. See |
| // |SSL_CTX_set_keylog_callback|. |
| void (*keylog_callback)(const SSL *ssl, const char *line); |
| |
| // current_time_cb, if not NULL, is the function to use to get the current |
| // time. It sets |*out_clock| to the current time. The |ssl| argument is |
| // always NULL. See |SSL_CTX_set_current_time_cb|. |
| void (*current_time_cb)(const SSL *ssl, struct timeval *out_clock); |
| |
| // pool is used for all |CRYPTO_BUFFER|s in case we wish to share certificate |
| // memory. |
| CRYPTO_BUFFER_POOL *pool; |
| |
| // ticket_aead_method contains function pointers for opening and sealing |
| // session tickets. |
| const SSL_TICKET_AEAD_METHOD *ticket_aead_method; |
| |
| // verify_sigalgs, if not empty, is the set of signature algorithms |
| // accepted from the peer in decreasing order of preference. |
| uint16_t *verify_sigalgs; |
| size_t num_verify_sigalgs; |
| |
| // retain_only_sha256_of_client_certs is true if we should compute the SHA256 |
| // hash of the peer's certificate and then discard it to save memory and |
| // session space. Only effective on the server side. |
| bool retain_only_sha256_of_client_certs:1; |
| |
| // quiet_shutdown is true if the connection should not send a close_notify on |
| // shutdown. |
| bool quiet_shutdown:1; |
| |
| // ocsp_stapling_enabled is only used by client connections and indicates |
| // whether OCSP stapling will be requested. |
| bool ocsp_stapling_enabled:1; |
| |
| // If true, a client will request certificate timestamps. |
| bool signed_cert_timestamps_enabled:1; |
| |
| // tlsext_channel_id_enabled is whether Channel ID is enabled. For a server, |
| // means that we'll accept Channel IDs from clients. For a client, means that |
| // we'll advertise support. |
| bool tlsext_channel_id_enabled:1; |
| |
| // grease_enabled is whether draft-davidben-tls-grease-01 is enabled. |
| bool grease_enabled:1; |
| |
| // allow_unknown_alpn_protos is whether the client allows unsolicited ALPN |
| // protocols from the peer. |
| bool allow_unknown_alpn_protos:1; |
| |
| // ed25519_enabled is whether Ed25519 is advertised in the handshake. |
| bool ed25519_enabled:1; |
| |
| // false_start_allowed_without_alpn is whether False Start (if |
| // |SSL_MODE_ENABLE_FALSE_START| is enabled) is allowed without ALPN. |
| bool false_start_allowed_without_alpn:1; |
| |
| // handoff indicates that a server should stop after receiving the |
| // ClientHello and pause the handshake in such a way that |SSL_get_error| |
| // returns |SSL_HANDOFF|. |
| bool handoff:1; |
| }; |
| |
| // An ssl_shutdown_t describes the shutdown state of one end of the connection, |
| // whether it is alive or has been shutdown via close_notify or fatal alert. |
| enum ssl_shutdown_t { |
| ssl_shutdown_none = 0, |
| ssl_shutdown_close_notify = 1, |
| ssl_shutdown_error = 2, |
| }; |
| |
| struct SSL3_STATE { |
| static constexpr bool kAllowUniquePtr = true; |
| |
| SSL3_STATE(); |
| ~SSL3_STATE(); |
| |
| uint8_t read_sequence[8] = {0}; |
| uint8_t write_sequence[8] = {0}; |
| |
| uint8_t server_random[SSL3_RANDOM_SIZE] = {0}; |
| uint8_t client_random[SSL3_RANDOM_SIZE] = {0}; |
| |
| // read_buffer holds data from the transport to be processed. |
| SSLBuffer read_buffer; |
| // write_buffer holds data to be written to the transport. |
| SSLBuffer write_buffer; |
| |
| // pending_app_data is the unconsumed application data. It points into |
| // |read_buffer|. |
| Span<uint8_t> pending_app_data; |
| |
| // partial write - check the numbers match |
| unsigned int wnum = 0; // number of bytes sent so far |
| int wpend_tot = 0; // number bytes written |
| int wpend_type = 0; |
| int wpend_ret = 0; // number of bytes submitted |
| const uint8_t *wpend_buf = nullptr; |
| |
| // read_shutdown is the shutdown state for the read half of the connection. |
| enum ssl_shutdown_t read_shutdown = ssl_shutdown_none; |
| |
| // write_shutdown is the shutdown state for the write half of the connection. |
| enum ssl_shutdown_t write_shutdown = ssl_shutdown_none; |
| |
| // read_error, if |read_shutdown| is |ssl_shutdown_error|, is the error for |
| // the receive half of the connection. |
| UniquePtr<ERR_SAVE_STATE> read_error; |
| |
| int alert_dispatch = 0; |
| |
| int total_renegotiations = 0; |
| |
| // This holds a variable that indicates what we were doing when a 0 or -1 is |
| // returned. This is needed for non-blocking IO so we know what request |
| // needs re-doing when in SSL_accept or SSL_connect |
| int rwstate = SSL_NOTHING; |
| |
| // early_data_skipped is the amount of early data that has been skipped by the |
| // record layer. |
| uint16_t early_data_skipped = 0; |
| |
| // empty_record_count is the number of consecutive empty records received. |
| uint8_t empty_record_count = 0; |
| |
| // warning_alert_count is the number of consecutive warning alerts |
| // received. |
| uint8_t warning_alert_count = 0; |
| |
| // key_update_count is the number of consecutive KeyUpdates received. |
| uint8_t key_update_count = 0; |
| |
| // skip_early_data instructs the record layer to skip unexpected early data |
| // messages when 0RTT is rejected. |
| bool skip_early_data:1; |
| |
| // have_version is true if the connection's final version is known. Otherwise |
| // the version has not been negotiated yet. |
| bool have_version:1; |
| |
| // v2_hello_done is true if the peer's V2ClientHello, if any, has been handled |
| // and future messages should use the record layer. |
| bool v2_hello_done:1; |
| |
| // is_v2_hello is true if the current handshake message was derived from a |
| // V2ClientHello rather than received from the peer directly. |
| bool is_v2_hello:1; |
| |
| // has_message is true if the current handshake message has been returned |
| // at least once by |get_message| and false otherwise. |
| bool has_message:1; |
| |
| // initial_handshake_complete is true if the initial handshake has |
| // completed. |
| bool initial_handshake_complete:1; |
| |
| // session_reused indicates whether a session was resumed. |
| bool session_reused:1; |
| |
| bool send_connection_binding:1; |
| |
| // In a client, this means that the server supported Channel ID and that a |
| // Channel ID was sent. In a server it means that we echoed support for |
| // Channel IDs and that tlsext_channel_id will be valid after the |
| // handshake. |
| bool tlsext_channel_id_valid:1; |
| |
| // key_update_pending is true if we have a KeyUpdate acknowledgment |
| // outstanding. |
| bool key_update_pending:1; |
| |
| // wpend_pending is true if we have a pending write outstanding. |
| bool wpend_pending:1; |
| |
| // early_data_accepted is true if early data was accepted by the server. |
| bool early_data_accepted:1; |
| |
| // draft_downgrade is whether the TLS 1.3 anti-downgrade logic would have |
| // fired, were it not a draft. |
| bool draft_downgrade:1; |
| |
| // hs_buf is the buffer of handshake data to process. |
| UniquePtr<BUF_MEM> hs_buf; |
| |
| // pending_flight is the pending outgoing flight. This is used to flush each |
| // handshake flight in a single write. |write_buffer| must be written out |
| // before this data. |
| UniquePtr<BUF_MEM> pending_flight; |
| |
| // pending_flight_offset is the number of bytes of |pending_flight| which have |
| // been successfully written. |
| uint32_t pending_flight_offset = 0; |
| |
| // ticket_age_skew is the difference, in seconds, between the client-sent |
| // ticket age and the server-computed value in TLS 1.3 server connections |
| // which resumed a session. |
| int32_t ticket_age_skew = 0; |
| |
| // aead_read_ctx is the current read cipher state. |
| UniquePtr<SSLAEADContext> aead_read_ctx; |
| |
| // aead_write_ctx is the current write cipher state. |
| UniquePtr<SSLAEADContext> aead_write_ctx; |
| |
| // hs is the handshake state for the current handshake or NULL if there isn't |
| // one. |
| UniquePtr<SSL_HANDSHAKE> hs; |
| |
| uint8_t write_traffic_secret[EVP_MAX_MD_SIZE] = {0}; |
| uint8_t read_traffic_secret[EVP_MAX_MD_SIZE] = {0}; |
| uint8_t exporter_secret[EVP_MAX_MD_SIZE] = {0}; |
| uint8_t early_exporter_secret[EVP_MAX_MD_SIZE] = {0}; |
| uint8_t write_traffic_secret_len = 0; |
| uint8_t read_traffic_secret_len = 0; |
| uint8_t exporter_secret_len = 0; |
| uint8_t early_exporter_secret_len = 0; |
| |
| // Connection binding to prevent renegotiation attacks |
| uint8_t previous_client_finished[12] = {0}; |
| uint8_t previous_client_finished_len = 0; |
| uint8_t previous_server_finished_len = 0; |
| uint8_t previous_server_finished[12] = {0}; |
| |
| uint8_t send_alert[2] = {0}; |
| |
| // established_session is the session established by the connection. This |
| // session is only filled upon the completion of the handshake and is |
| // immutable. |
| UniquePtr<SSL_SESSION> established_session; |
| |
| // Next protocol negotiation. For the client, this is the protocol that we |
| // sent in NextProtocol and is set when handling ServerHello extensions. |
| // |
| // For a server, this is the client's selected_protocol from NextProtocol and |
| // is set when handling the NextProtocol message, before the Finished |
| // message. |
| Array<uint8_t> next_proto_negotiated; |
| |
| // ALPN information |
| // (we are in the process of transitioning from NPN to ALPN.) |
| |
| // In a server these point to the selected ALPN protocol after the |
| // ClientHello has been processed. In a client these contain the protocol |
| // that the server selected once the ServerHello has been processed. |
| Array<uint8_t> alpn_selected; |
| |
| // hostname, on the server, is the value of the SNI extension. |
| UniquePtr<char> hostname; |
| |
| // For a server: |
| // If |tlsext_channel_id_valid| is true, then this contains the |
| // verified Channel ID from the client: a P256 point, (x,y), where |
| // each are big-endian values. |
| uint8_t tlsext_channel_id[64] = {0}; |
| |
| // Contains the QUIC transport params received by the peer. |
| Array<uint8_t> peer_quic_transport_params; |
| }; |
| |
| // lengths of messages |
| #define DTLS1_COOKIE_LENGTH 256 |
| |
| #define DTLS1_RT_HEADER_LENGTH 13 |
| |
| #define DTLS1_HM_HEADER_LENGTH 12 |
| |
| #define DTLS1_CCS_HEADER_LENGTH 1 |
| |
| #define DTLS1_AL_HEADER_LENGTH 2 |
| |
| struct hm_header_st { |
| uint8_t type; |
| uint32_t msg_len; |
| uint16_t seq; |
| uint32_t frag_off; |
| uint32_t frag_len; |
| }; |
| |
| // An hm_fragment is an incoming DTLS message, possibly not yet assembled. |
| struct hm_fragment { |
| static constexpr bool kAllowUniquePtr = true; |
| |
| hm_fragment() {} |
| hm_fragment(const hm_fragment &) = delete; |
| hm_fragment &operator=(const hm_fragment &) = delete; |
| |
| ~hm_fragment(); |
| |
| // type is the type of the message. |
| uint8_t type = 0; |
| // seq is the sequence number of this message. |
| uint16_t seq = 0; |
| // msg_len is the length of the message body. |
| uint32_t msg_len = 0; |
| // data is a pointer to the message, including message header. It has length |
| // |DTLS1_HM_HEADER_LENGTH| + |msg_len|. |
| uint8_t *data = nullptr; |
| // reassembly is a bitmask of |msg_len| bits corresponding to which parts of |
| // the message have been received. It is NULL if the message is complete. |
| uint8_t *reassembly = nullptr; |
| }; |
| |
| struct OPENSSL_timeval { |
| uint64_t tv_sec; |
| uint32_t tv_usec; |
| }; |
| |
| struct DTLS1_STATE { |
| static constexpr bool kAllowUniquePtr = true; |
| |
| DTLS1_STATE(); |
| ~DTLS1_STATE(); |
| |
| // has_change_cipher_spec is true if we have received a ChangeCipherSpec from |
| // the peer in this epoch. |
| bool has_change_cipher_spec:1; |
| |
| // outgoing_messages_complete is true if |outgoing_messages| has been |
| // completed by an attempt to flush it. Future calls to |add_message| and |
| // |add_change_cipher_spec| will start a new flight. |
| bool outgoing_messages_complete:1; |
| |
| // flight_has_reply is true if the current outgoing flight is complete and has |
| // processed at least one message. This is used to detect whether we or the |
| // peer sent the final flight. |
| bool flight_has_reply:1; |
| |
| uint8_t cookie[DTLS1_COOKIE_LENGTH] = {0}; |
| size_t cookie_len = 0; |
| |
| // The current data and handshake epoch. This is initially undefined, and |
| // starts at zero once the initial handshake is completed. |
| uint16_t r_epoch = 0; |
| uint16_t w_epoch = 0; |
| |
| // records being received in the current epoch |
| DTLS1_BITMAP bitmap; |
| |
| uint16_t handshake_write_seq = 0; |
| uint16_t handshake_read_seq = 0; |
| |
| // save last sequence number for retransmissions |
| uint8_t last_write_sequence[8] = {0}; |
| UniquePtr<SSLAEADContext> last_aead_write_ctx; |
| |
| // incoming_messages is a ring buffer of incoming handshake messages that have |
| // yet to be processed. The front of the ring buffer is message number |
| // |handshake_read_seq|, at position |handshake_read_seq| % |
| // |SSL_MAX_HANDSHAKE_FLIGHT|. |
| UniquePtr<hm_fragment> incoming_messages[SSL_MAX_HANDSHAKE_FLIGHT]; |
| |
| // outgoing_messages is the queue of outgoing messages from the last handshake |
| // flight. |
| DTLS_OUTGOING_MESSAGE outgoing_messages[SSL_MAX_HANDSHAKE_FLIGHT]; |
| uint8_t outgoing_messages_len = 0; |
| |
| // outgoing_written is the number of outgoing messages that have been |
| // written. |
| uint8_t outgoing_written = 0; |
| // outgoing_offset is the number of bytes of the next outgoing message have |
| // been written. |
| uint32_t outgoing_offset = 0; |
| |
| unsigned mtu = 0; // max DTLS packet size |
| |
| // num_timeouts is the number of times the retransmit timer has fired since |
| // the last time it was reset. |
| unsigned num_timeouts = 0; |
| |
| // Indicates when the last handshake msg or heartbeat sent will |
| // timeout. |
| struct OPENSSL_timeval next_timeout = {0, 0}; |
| |
| // timeout_duration_ms is the timeout duration in milliseconds. |
| unsigned timeout_duration_ms = 0; |
| }; |
| |
| // SSLConnection backs the public |SSL| type. Due to compatibility constraints, |
| // it is a base class for |ssl_st|. |
| struct SSLConnection { |
| // method is the method table corresponding to the current protocol (DTLS or |
| // TLS). |
| const SSL_PROTOCOL_METHOD *method; |
| |
| // version is the protocol version. |
| uint16_t version; |
| |
| // conf_max_version is the maximum acceptable protocol version configured by |
| // |SSL_set_max_proto_version|. Note this version is normalized in DTLS and is |
| // further constrainted by |SSL_OP_NO_*|. |
| uint16_t conf_max_version; |
| |
| // conf_min_version is the minimum acceptable protocol version configured by |
| // |SSL_set_min_proto_version|. Note this version is normalized in DTLS and is |
| // further constrainted by |SSL_OP_NO_*|. |
| uint16_t conf_min_version; |
| |
| uint16_t max_send_fragment; |
| |
| // There are 2 BIO's even though they are normally both the same. This is so |
| // data can be read and written to different handlers |
| |
| BIO *rbio; // used by SSL_read |
| BIO *wbio; // used by SSL_write |
| |
| // do_handshake runs the handshake. On completion, it returns |ssl_hs_ok|. |
| // Otherwise, it returns a value corresponding to what operation is needed to |
| // progress. |
| enum ssl_hs_wait_t (*do_handshake)(SSL_HANDSHAKE *hs); |
| |
| SSL3_STATE *s3; // SSLv3 variables |
| DTLS1_STATE *d1; // DTLSv1 variables |
| |
| // callback that allows applications to peek at protocol messages |
| void (*msg_callback)(int write_p, int version, int content_type, |
| const void *buf, size_t len, SSL *ssl, void *arg); |
| void *msg_callback_arg; |
| |
| X509_VERIFY_PARAM *param; |
| |
| // crypto |
| struct ssl_cipher_preference_list_st *cipher_list; |
| |
| // session info |
| |
| // This is used to hold the local certificate used (i.e. the server |
| // certificate for a server or the client certificate for a client). |
| CERT *cert; |
| |
| // initial_timeout_duration_ms is the default DTLS timeout duration in |
| // milliseconds. It's used to initialize the timer any time it's restarted. |
| unsigned initial_timeout_duration_ms; |
| |
| // tls13_variant is the variant of TLS 1.3 we are using for this |
| // configuration. |
| enum tls13_variant_t tls13_variant; |
| |
| // session is the configured session to be offered by the client. This session |
| // is immutable. |
| SSL_SESSION *session; |
| |
| int (*verify_callback)(int ok, |
| X509_STORE_CTX *ctx); // fail if callback returns 0 |
| |
| enum ssl_verify_result_t (*custom_verify_callback)(SSL *ssl, |
| uint8_t *out_alert); |
| |
| void (*info_callback)(const SSL *ssl, int type, int value); |
| |
| // Server-only: psk_identity_hint is the identity hint to send in |
| // PSK-based key exchanges. |
| char *psk_identity_hint; |
| |
| unsigned int (*psk_client_callback)(SSL *ssl, const char *hint, |
| char *identity, |
| unsigned int max_identity_len, |
| uint8_t *psk, unsigned int max_psk_len); |
| unsigned int (*psk_server_callback)(SSL *ssl, const char *identity, |
| uint8_t *psk, unsigned int max_psk_len); |
| |
| SSL_CTX *ctx; |
| |
| // extra application data |
| CRYPTO_EX_DATA ex_data; |
| |
| // for server side, keep the list of CA_dn we can use |
| STACK_OF(CRYPTO_BUFFER) *client_CA; |
| |
| // cached_x509_client_CA is a cache of parsed versions of the elements of |
| // |client_CA|. |
| STACK_OF(X509_NAME) *cached_x509_client_CA; |
| |
| uint32_t options; // protocol behaviour |
| uint32_t mode; // API behaviour |
| uint32_t max_cert_list; |
| uint16_t dummy_pq_padding_len; |
| char *tlsext_hostname; |
| size_t supported_group_list_len; |
| uint16_t *supported_group_list; // our list |
| |
| // session_ctx is the |SSL_CTX| used for the session cache and related |
| // settings. |
| SSL_CTX *session_ctx; |
| |
| // srtp_profiles is the list of configured SRTP protection profiles for |
| // DTLS-SRTP. |
| STACK_OF(SRTP_PROTECTION_PROFILE) *srtp_profiles; |
| |
| // srtp_profile is the selected SRTP protection profile for |
| // DTLS-SRTP. |
| const SRTP_PROTECTION_PROFILE *srtp_profile; |
| |
| // The client's Channel ID private key. |
| EVP_PKEY *tlsext_channel_id_private; |
| |
| // For a client, this contains the list of supported protocols in wire |
| // format. |
| uint8_t *alpn_client_proto_list; |
| unsigned alpn_client_proto_list_len; |
| |
| // Contains a list of supported Token Binding key parameters. |
| uint8_t *token_binding_params; |
| size_t token_binding_params_len; |
| |
| // The negotiated Token Binding key parameter. Only valid if |
| // |token_binding_negotiated| is set. |
| uint8_t negotiated_token_binding_param; |
| |
| // Contains the QUIC transport params that this endpoint will send. |
| uint8_t *quic_transport_params; |
| size_t quic_transport_params_len; |
| |
| // renegotiate_mode controls how peer renegotiation attempts are handled. |
| enum ssl_renegotiate_mode_t renegotiate_mode; |
| |
| // verify_mode is a bitmask of |SSL_VERIFY_*| values. |
| uint8_t verify_mode; |
| |
| // server is true iff the this SSL* is the server half. Note: before the SSL* |
| // is initialized by either SSL_set_accept_state or SSL_set_connect_state, |
| // the side is not determined. In this state, server is always false. |
| bool server:1; |
| |
| // quiet_shutdown is true if the connection should not send a close_notify on |
| // shutdown. |
| bool quiet_shutdown:1; |
| |
| // Enable signed certificate time stamps. Currently client only. |
| bool signed_cert_timestamps_enabled:1; |
| |
| // ocsp_stapling_enabled is only used by client connections and indicates |
| // whether OCSP stapling will be requested. |
| bool ocsp_stapling_enabled:1; |
| |
| // tlsext_channel_id_enabled is copied from the |SSL_CTX|. For a server, |
| // means that we'll accept Channel IDs from clients. For a client, means that |
| // we'll advertise support. |
| bool tlsext_channel_id_enabled:1; |
| |
| // token_binding_negotiated is set if Token Binding was negotiated. |
| bool token_binding_negotiated:1; |
| |
| // retain_only_sha256_of_client_certs is true if we should compute the SHA256 |
| // hash of the peer's certificate and then discard it to save memory and |
| // session space. Only effective on the server side. |
| bool retain_only_sha256_of_client_certs:1; |
| |
| // handoff indicates that a server should stop after receiving the |
| // ClientHello and pause the handshake in such a way that |SSL_get_error| |
| // returns |SSL_HANDOFF|. This is copied in |SSL_new| from the |SSL_CTX| |
| // element of the same name and may be cleared if the handoff is declined. |
| bool handoff:1; |
| }; |
| |
| // From draft-ietf-tls-tls13-18, used in determining PSK modes. |
| #define SSL_PSK_DHE_KE 0x1 |
| |
| // From draft-ietf-tls-tls13-16, used in determining whether to respond with a |
| // KeyUpdate. |
| #define SSL_KEY_UPDATE_NOT_REQUESTED 0 |
| #define SSL_KEY_UPDATE_REQUESTED 1 |
| |
| // kMaxEarlyDataAccepted is the advertised number of plaintext bytes of early |
| // data that will be accepted. This value should be slightly below |
| // kMaxEarlyDataSkipped in tls_record.c, which is measured in ciphertext. |
| static const size_t kMaxEarlyDataAccepted = 14336; |
| |
| CERT *ssl_cert_new(const SSL_X509_METHOD *x509_method); |
| CERT *ssl_cert_dup(CERT *cert); |
| void ssl_cert_clear_certs(CERT *cert); |
| void ssl_cert_free(CERT *cert); |
| int ssl_set_cert(CERT *cert, UniquePtr<CRYPTO_BUFFER> buffer); |
| int ssl_is_key_type_supported(int key_type); |
| // ssl_compare_public_and_private_key returns one if |pubkey| is the public |
| // counterpart to |privkey|. Otherwise it returns zero and pushes a helpful |
| // message on the error queue. |
| int ssl_compare_public_and_private_key(const EVP_PKEY *pubkey, |
| const EVP_PKEY *privkey); |
| int ssl_cert_check_private_key(const CERT *cert, const EVP_PKEY *privkey); |
| int ssl_get_new_session(SSL_HANDSHAKE *hs, int is_server); |
| int ssl_encrypt_ticket(SSL *ssl, CBB *out, const SSL_SESSION *session); |
| int ssl_ctx_rotate_ticket_encryption_key(SSL_CTX *ctx); |
| |
| // ssl_session_new returns a newly-allocated blank |SSL_SESSION| or nullptr on |
| // error. |
| UniquePtr<SSL_SESSION> ssl_session_new(const SSL_X509_METHOD *x509_method); |
| |
| // SSL_SESSION_parse parses an |SSL_SESSION| from |cbs| and advances |cbs| over |
| // the parsed data. |
| UniquePtr<SSL_SESSION> SSL_SESSION_parse(CBS *cbs, |
| const SSL_X509_METHOD *x509_method, |
| CRYPTO_BUFFER_POOL *pool); |
| |
| // ssl_session_serialize writes |in| to |cbb| as if it were serialising a |
| // session for Session-ID resumption. It returns one on success and zero on |
| // error. |
| int ssl_session_serialize(const SSL_SESSION *in, CBB *cbb); |
| |
| // ssl_session_is_context_valid returns one if |session|'s session ID context |
| // matches the one set on |ssl| and zero otherwise. |
| int ssl_session_is_context_valid(const SSL *ssl, const SSL_SESSION *session); |
| |
| // ssl_session_is_time_valid returns one if |session| is still valid and zero if |
| // it has expired. |
| int ssl_session_is_time_valid(const SSL *ssl, const SSL_SESSION *session); |
| |
| // ssl_session_is_resumable returns one if |session| is resumable for |hs| and |
| // zero otherwise. |
| int ssl_session_is_resumable(const SSL_HANDSHAKE *hs, |
| const SSL_SESSION *session); |
| |
| // ssl_session_protocol_version returns the protocol version associated with |
| // |session|. Note that despite the name, this is not the same as |
| // |SSL_SESSION_get_protocol_version|. The latter is based on upstream's name. |
| uint16_t ssl_session_protocol_version(const SSL_SESSION *session); |
| |
| // ssl_session_get_digest returns the digest used in |session|. |
| const EVP_MD *ssl_session_get_digest(const SSL_SESSION *session); |
| |
| void ssl_set_session(SSL *ssl, SSL_SESSION *session); |
| |
| // ssl_get_prev_session looks up the previous session based on |client_hello|. |
| // On success, it sets |*out_session| to the session or nullptr if none was |
| // found. If the session could not be looked up synchronously, it returns |
| // |ssl_hs_pending_session| and should be called again. If a ticket could not be |
| // decrypted immediately it returns |ssl_hs_pending_ticket| and should also |
| // be called again. Otherwise, it returns |ssl_hs_error|. |
| enum ssl_hs_wait_t ssl_get_prev_session(SSL *ssl, |
| UniquePtr<SSL_SESSION> *out_session, |
| bool *out_tickets_supported, |
| bool *out_renew_ticket, |
| const SSL_CLIENT_HELLO *client_hello); |
| |
| // The following flags determine which parts of the session are duplicated. |
| #define SSL_SESSION_DUP_AUTH_ONLY 0x0 |
| #define SSL_SESSION_INCLUDE_TICKET 0x1 |
| #define SSL_SESSION_INCLUDE_NONAUTH 0x2 |
| #define SSL_SESSION_DUP_ALL \ |
| (SSL_SESSION_INCLUDE_TICKET | SSL_SESSION_INCLUDE_NONAUTH) |
| |
| // SSL_SESSION_dup returns a newly-allocated |SSL_SESSION| with a copy of the |
| // fields in |session| or nullptr on error. The new session is non-resumable and |
| // must be explicitly marked resumable once it has been filled in. |
| OPENSSL_EXPORT UniquePtr<SSL_SESSION> SSL_SESSION_dup(SSL_SESSION *session, |
| int dup_flags); |
| |
| // ssl_session_rebase_time updates |session|'s start time to the current time, |
| // adjusting the timeout so the expiration time is unchanged. |
| void ssl_session_rebase_time(SSL *ssl, SSL_SESSION *session); |
| |
| // ssl_session_renew_timeout calls |ssl_session_rebase_time| and renews |
| // |session|'s timeout to |timeout| (measured from the current time). The |
| // renewal is clamped to the session's auth_timeout. |
| void ssl_session_renew_timeout(SSL *ssl, SSL_SESSION *session, |
| uint32_t timeout); |
| |
| void ssl_cipher_preference_list_free( |
| struct ssl_cipher_preference_list_st *cipher_list); |
| |
| // ssl_get_cipher_preferences returns the cipher preference list for TLS 1.2 and |
| // below. |
| const struct ssl_cipher_preference_list_st *ssl_get_cipher_preferences( |
| const SSL *ssl); |
| |
| void ssl_update_cache(SSL_HANDSHAKE *hs, int mode); |
| |
| int ssl_send_alert(SSL *ssl, int level, int desc); |
| bool ssl3_get_message(SSL *ssl, SSLMessage *out); |
| ssl_open_record_t ssl3_open_handshake(SSL *ssl, size_t *out_consumed, |
| uint8_t *out_alert, Span<uint8_t> in); |
| void ssl3_next_message(SSL *ssl); |
| |
| int ssl3_dispatch_alert(SSL *ssl); |
| ssl_open_record_t ssl3_open_app_data(SSL *ssl, Span<uint8_t> *out, |
| size_t *out_consumed, uint8_t *out_alert, |
| Span<uint8_t> in); |
| ssl_open_record_t ssl3_open_change_cipher_spec(SSL *ssl, size_t *out_consumed, |
| uint8_t *out_alert, |
| Span<uint8_t> in); |
| int ssl3_write_app_data(SSL *ssl, bool *out_needs_handshake, const uint8_t *buf, |
| int len); |
| |
| bool ssl3_new(SSL *ssl); |
| void ssl3_free(SSL *ssl); |
| |
| bool ssl3_init_message(SSL *ssl, CBB *cbb, CBB *body, uint8_t type); |
| bool ssl3_finish_message(SSL *ssl, CBB *cbb, Array<uint8_t> *out_msg); |
| bool ssl3_add_message(SSL *ssl, Array<uint8_t> msg); |
| bool ssl3_add_change_cipher_spec(SSL *ssl); |
| bool ssl3_add_alert(SSL *ssl, uint8_t level, uint8_t desc); |
| int ssl3_flush_flight(SSL *ssl); |
| |
| bool dtls1_init_message(SSL *ssl, CBB *cbb, CBB *body, uint8_t type); |
| bool dtls1_finish_message(SSL *ssl, CBB *cbb, Array<uint8_t> *out_msg); |
| bool dtls1_add_message(SSL *ssl, Array<uint8_t> msg); |
| bool dtls1_add_change_cipher_spec(SSL *ssl); |
| bool dtls1_add_alert(SSL *ssl, uint8_t level, uint8_t desc); |
| int dtls1_flush_flight(SSL *ssl); |
| |
| // ssl_add_message_cbb finishes the handshake message in |cbb| and adds it to |
| // the pending flight. It returns true on success and false on error. |
| bool ssl_add_message_cbb(SSL *ssl, CBB *cbb); |
| |
| // ssl_hash_message incorporates |msg| into the handshake hash. It returns true |
| // on success and false on allocation failure. |
| bool ssl_hash_message(SSL_HANDSHAKE *hs, const SSLMessage &msg); |
| |
| ssl_open_record_t dtls1_open_app_data(SSL *ssl, Span<uint8_t> *out, |
| size_t *out_consumed, uint8_t *out_alert, |
| Span<uint8_t> in); |
| ssl_open_record_t dtls1_open_change_cipher_spec(SSL *ssl, size_t *out_consumed, |
| uint8_t *out_alert, |
| Span<uint8_t> in); |
| |
| int dtls1_write_app_data(SSL *ssl, bool *out_needs_handshake, |
| const uint8_t *buf, int len); |
| |
| // dtls1_write_record sends a record. It returns one on success and <= 0 on |
| // error. |
| int dtls1_write_record(SSL *ssl, int type, const uint8_t *buf, size_t len, |
| enum dtls1_use_epoch_t use_epoch); |
| |
| int dtls1_retransmit_outgoing_messages(SSL *ssl); |
| bool dtls1_parse_fragment(CBS *cbs, struct hm_header_st *out_hdr, |
| CBS *out_body); |
| bool dtls1_check_timeout_num(SSL *ssl); |
| |
| void dtls1_start_timer(SSL *ssl); |
| void dtls1_stop_timer(SSL *ssl); |
| bool dtls1_is_timer_expired(SSL *ssl); |
| unsigned int dtls1_min_mtu(void); |
| |
| bool dtls1_new(SSL *ssl); |
| void dtls1_free(SSL *ssl); |
| |
| bool dtls1_get_message(SSL *ssl, SSLMessage *out); |
| ssl_open_record_t dtls1_open_handshake(SSL *ssl, size_t *out_consumed, |
| uint8_t *out_alert, Span<uint8_t> in); |
| void dtls1_next_message(SSL *ssl); |
| int dtls1_dispatch_alert(SSL *ssl); |
| |
| // tls1_configure_aead configures either the read or write direction AEAD (as |
| // determined by |direction|) using the keys generated by the TLS KDF. The |
| // |key_block_cache| argument is used to store the generated key block, if |
| // empty. Otherwise it's assumed that the key block is already contained within |
| // it. Returns one on success or zero on error. |
| int tls1_configure_aead(SSL *ssl, evp_aead_direction_t direction, |
| Array<uint8_t> *key_block_cache, |
| const SSL_CIPHER *cipher, |
| Span<const uint8_t> iv_override); |
| |
| int tls1_change_cipher_state(SSL_HANDSHAKE *hs, evp_aead_direction_t direction); |
| int tls1_generate_master_secret(SSL_HANDSHAKE *hs, uint8_t *out, |
| Span<const uint8_t> premaster); |
| |
| // tls1_get_grouplist returns the locally-configured group preference list. |
| Span<const uint16_t> tls1_get_grouplist(const SSL *ssl); |
| |
| // tls1_check_group_id returns one if |group_id| is consistent with |
| // locally-configured group preferences. |
| int tls1_check_group_id(const SSL *ssl, uint16_t group_id); |
| |
| // tls1_get_shared_group sets |*out_group_id| to the first preferred shared |
| // group between client and server preferences and returns one. If none may be |
| // found, it returns zero. |
| int tls1_get_shared_group(SSL_HANDSHAKE *hs, uint16_t *out_group_id); |
| |
| // tls1_set_curves converts the array of |ncurves| NIDs pointed to by |curves| |
| // into a newly allocated array of TLS group IDs. On success, the function |
| // returns one and writes the array to |*out_group_ids| and its size to |
| // |*out_group_ids_len|. Otherwise, it returns zero. |
| int tls1_set_curves(uint16_t **out_group_ids, size_t *out_group_ids_len, |
| const int *curves, size_t ncurves); |
| |
| // tls1_set_curves_list converts the string of curves pointed to by |curves| |
| // into a newly allocated array of TLS group IDs. On success, the function |
| // returns one and writes the array to |*out_group_ids| and its size to |
| // |*out_group_ids_len|. Otherwise, it returns zero. |
| int tls1_set_curves_list(uint16_t **out_group_ids, size_t *out_group_ids_len, |
| const char *curves); |
| |
| // ssl_add_clienthello_tlsext writes ClientHello extensions to |out|. It |
| // returns one on success and zero on failure. The |header_len| argument is the |
| // length of the ClientHello written so far and is used to compute the padding |
| // length. (It does not include the record header.) |
| int ssl_add_clienthello_tlsext(SSL_HANDSHAKE *hs, CBB *out, size_t header_len); |
| |
| int ssl_add_serverhello_tlsext(SSL_HANDSHAKE *hs, CBB *out); |
| int ssl_parse_clienthello_tlsext(SSL_HANDSHAKE *hs, |
| const SSL_CLIENT_HELLO *client_hello); |
| int ssl_parse_serverhello_tlsext(SSL_HANDSHAKE *hs, CBS *cbs); |
| |
| #define tlsext_tick_md EVP_sha256 |
| |
| // ssl_process_ticket processes a session ticket from the client. It returns |
| // one of: |
| // |ssl_ticket_aead_success|: |*out_session| is set to the parsed session and |
| // |*out_renew_ticket| is set to whether the ticket should be renewed. |
| // |ssl_ticket_aead_ignore_ticket|: |*out_renew_ticket| is set to whether a |
| // fresh ticket should be sent, but the given ticket cannot be used. |
| // |ssl_ticket_aead_retry|: the ticket could not be immediately decrypted. |
| // Retry later. |
| // |ssl_ticket_aead_error|: an error occured that is fatal to the connection. |
| enum ssl_ticket_aead_result_t ssl_process_ticket( |
| SSL *ssl, UniquePtr<SSL_SESSION> *out_session, bool *out_renew_ticket, |
| const uint8_t *ticket, size_t ticket_len, const uint8_t *session_id, |
| size_t session_id_len); |
| |
| // tls1_verify_channel_id processes |msg| as a Channel ID message, and verifies |
| // the signature. If the key is valid, it saves the Channel ID and returns |
| // one. Otherwise, it returns zero. |
| int tls1_verify_channel_id(SSL_HANDSHAKE *hs, const SSLMessage &msg); |
| |
| // tls1_write_channel_id generates a Channel ID message and puts the output in |
| // |cbb|. |ssl->tlsext_channel_id_private| must already be set before calling. |
| // This function returns true on success and false on error. |
| bool tls1_write_channel_id(SSL_HANDSHAKE *hs, CBB *cbb); |
| |
| // tls1_channel_id_hash computes the hash to be signed by Channel ID and writes |
| // it to |out|, which must contain at least |EVP_MAX_MD_SIZE| bytes. It returns |
| // one on success and zero on failure. |
| int tls1_channel_id_hash(SSL_HANDSHAKE *hs, uint8_t *out, size_t *out_len); |
| |
| int tls1_record_handshake_hashes_for_channel_id(SSL_HANDSHAKE *hs); |
| |
| // ssl_do_channel_id_callback checks runs |ssl->ctx->channel_id_cb| if |
| // necessary. It returns one on success and zero on fatal error. Note that, on |
| // success, |ssl->tlsext_channel_id_private| may be unset, in which case the |
| // operation should be retried later. |
| int ssl_do_channel_id_callback(SSL *ssl); |
| |
| // ssl_can_write returns one if |ssl| is allowed to write and zero otherwise. |
| int ssl_can_write(const SSL *ssl); |
| |
| // ssl_can_read returns one if |ssl| is allowed to read and zero otherwise. |
| int ssl_can_read(const SSL *ssl); |
| |
| void ssl_get_current_time(const SSL *ssl, struct OPENSSL_timeval *out_clock); |
| void ssl_ctx_get_current_time(const SSL_CTX *ctx, |
| struct OPENSSL_timeval *out_clock); |
| |
| // ssl_reset_error_state resets state for |SSL_get_error|. |
| void ssl_reset_error_state(SSL *ssl); |
| |
| // ssl_set_read_error sets |ssl|'s read half into an error state, saving the |
| // current state of the error queue. |
| void ssl_set_read_error(SSL* ssl); |
| |
| } // namespace bssl |
| |
| |
| // Opaque C types. |
| // |
| // The following types are exported to C code as public typedefs, so they must |
| // be defined outside of the namespace. |
| |
| // ssl_method_st backs the public |SSL_METHOD| type. It is a compatibility |
| // structure to support the legacy version-locked methods. |
| struct ssl_method_st { |
| // version, if non-zero, is the only protocol version acceptable to an |
| // SSL_CTX initialized from this method. |
| uint16_t version; |
| // method is the underlying SSL_PROTOCOL_METHOD that initializes the |
| // SSL_CTX. |
| const bssl::SSL_PROTOCOL_METHOD *method; |
| // x509_method contains pointers to functions that might deal with |X509| |
| // compatibility, or might be a no-op, depending on the application. |
| const SSL_X509_METHOD *x509_method; |
| }; |
| |
| struct ssl_x509_method_st { |
| // check_client_CA_list returns one if |names| is a good list of X.509 |
| // distinguished names and zero otherwise. This is used to ensure that we can |
| // reject unparsable values at handshake time when using crypto/x509. |
| int (*check_client_CA_list)(STACK_OF(CRYPTO_BUFFER) *names); |
| |
| // cert_clear frees and NULLs all X509 certificate-related state. |
| void (*cert_clear)(bssl::CERT *cert); |
| // cert_free frees all X509-related state. |
| void (*cert_free)(bssl::CERT *cert); |
| // cert_flush_cached_chain drops any cached |X509|-based certificate chain |
| // from |cert|. |
| // cert_dup duplicates any needed fields from |cert| to |new_cert|. |
| void (*cert_dup)(bssl::CERT *new_cert, const bssl::CERT *cert); |
| void (*cert_flush_cached_chain)(bssl::CERT *cert); |
| // cert_flush_cached_chain drops any cached |X509|-based leaf certificate |
| // from |cert|. |
| void (*cert_flush_cached_leaf)(bssl::CERT *cert); |
| |
| // session_cache_objects fills out |sess->x509_peer| and |sess->x509_chain| |
| // from |sess->certs| and erases |sess->x509_chain_without_leaf|. It returns |
| // one on success or zero on error. |
| int (*session_cache_objects)(SSL_SESSION *session); |
| // session_dup duplicates any needed fields from |session| to |new_session|. |
| // It returns one on success or zero on error. |
| int (*session_dup)(SSL_SESSION *new_session, const SSL_SESSION *session); |
| // session_clear frees any X509-related state from |session|. |
| void (*session_clear)(SSL_SESSION *session); |
| // session_verify_cert_chain verifies the certificate chain in |session|, |
| // sets |session->verify_result| and returns one on success or zero on |
| // error. |
| int (*session_verify_cert_chain)(SSL_SESSION *session, SSL *ssl, |
| uint8_t *out_alert); |
| |
| // hs_flush_cached_ca_names drops any cached |X509_NAME|s from |hs|. |
| void (*hs_flush_cached_ca_names)(bssl::SSL_HANDSHAKE *hs); |
| // ssl_new does any neccessary initialisation of |ssl|. It returns one on |
| // success or zero on error. |
| int (*ssl_new)(SSL *ssl); |
| // ssl_free frees anything created by |ssl_new|. |
| void (*ssl_free)(SSL *ssl); |
| // ssl_flush_cached_client_CA drops any cached |X509_NAME|s from |ssl|. |
| void (*ssl_flush_cached_client_CA)(SSL *ssl); |
| // ssl_auto_chain_if_needed runs the deprecated auto-chaining logic if |
| // necessary. On success, it updates |ssl|'s certificate configuration as |
| // needed and returns one. Otherwise, it returns zero. |
| int (*ssl_auto_chain_if_needed)(SSL *ssl); |
| // ssl_ctx_new does any neccessary initialisation of |ctx|. It returns one on |
| // success or zero on error. |
| int (*ssl_ctx_new)(SSL_CTX *ctx); |
| // ssl_ctx_free frees anything created by |ssl_ctx_new|. |
| void (*ssl_ctx_free)(SSL_CTX *ctx); |
| // ssl_ctx_flush_cached_client_CA drops any cached |X509_NAME|s from |ctx|. |
| void (*ssl_ctx_flush_cached_client_CA)(SSL_CTX *ssl); |
| }; |
| |
| // The following types back public C-exposed types which must live in the global |
| // namespace. We use subclassing so the implementations may be C++ types with |
| // methods and destructor without polluting the global namespace. |
| struct ssl_ctx_st : public bssl::SSLContext {}; |
| struct ssl_st : public bssl::SSLConnection {}; |
| |
| |
| #endif // OPENSSL_HEADER_SSL_INTERNAL_H |