32blit-pico/audio/i2s.cpp

#include <cmath>

#include "audio.hpp"
#include "config.h"

#include "hardware/clocks.h"
#include "hardware/dma.h"
#include "hardware/pio.h"

#include "audio/audio.hpp"

#include "i2s.pio.h"

#define audio_pio __CONCAT(pio, AUDIO_I2S_PIO)

#define AUDIO_SAMPLE_FREQ 44100
#define AUDIO_BUFFER_SIZE 256
#define AUDIO_NUM_BUFFERS 2

static int16_t audio_buffer[AUDIO_BUFFER_SIZE * AUDIO_NUM_BUFFERS];
static volatile int need_refill = AUDIO_NUM_BUFFERS;
static int cur_read_buffer_index = 1;
static int cur_write_buffer_index = 1;

// track offset if we limit samples pre update
#ifdef AUDIO_MAX_SAMPLE_UPDATE
static int refill_offset = 0;
#endif

static const int dma_irq = 1; // we usually use DMA_IRQ_0 for display stuff
static int dma_channel;

static void __not_in_flash_func(i2s_irq_handler)() {
  if(!dma_irqn_get_channel_status(dma_irq, dma_channel))
    return;

  dma_irqn_acknowledge_channel(dma_irq, dma_channel);

  if(need_refill < AUDIO_NUM_BUFFERS - 1)
    need_refill++;

  // setup for next buffer
  dma_channel_set_read_addr(dma_channel, audio_buffer + cur_read_buffer_index * AUDIO_BUFFER_SIZE, true);

  cur_read_buffer_index = (cur_read_buffer_index + 1) % AUDIO_NUM_BUFFERS;
}

void init_audio() {
  // setup PIO

#if AUDIO_I2S_DATA_PIN >= 32 || AUDIO_I2S_CLOCK_PIN_BASE >= 31
    // this assumes anything else using this PIO can also deal with the base
    static_assert(AUDIO_I2S_DATA_PIN >= 16 && AUDIO_I2S_CLOCK_PIN_BASE >= 16);
    pio_set_gpio_base(audio_pio, 16);
#endif

  int pio_offset = pio_add_program(audio_pio, &i2s_program);

  int pio_sm = pio_claim_unused_sm(audio_pio, true);

  pio_sm_config cfg = i2s_program_get_default_config(pio_offset);

  const int bitrate = AUDIO_SAMPLE_FREQ * 16 * 2;
  const int clkdiv = clock_get_hz(clk_sys) / float(bitrate * 2);
  sm_config_set_clkdiv(&cfg, clkdiv);

  sm_config_set_out_shift(&cfg, false, true, 32);
  sm_config_set_out_pins(&cfg, AUDIO_I2S_DATA_PIN, 1);
  sm_config_set_fifo_join(&cfg, PIO_FIFO_JOIN_TX);
  sm_config_set_sideset_pins(&cfg, AUDIO_I2S_CLOCK_PIN_BASE);

  // init pins
  pio_gpio_init(audio_pio, AUDIO_I2S_DATA_PIN);
  pio_gpio_init(audio_pio, AUDIO_I2S_CLOCK_PIN_BASE + 0); // bit clock
  pio_gpio_init(audio_pio, AUDIO_I2S_CLOCK_PIN_BASE + 1); // left/right clock

  pio_sm_set_consecutive_pindirs(audio_pio, pio_sm, AUDIO_I2S_DATA_PIN, 1, true);
  pio_sm_set_consecutive_pindirs(audio_pio, pio_sm, AUDIO_I2S_CLOCK_PIN_BASE, 2, true);

  pio_sm_init(audio_pio, pio_sm, pio_offset, &cfg);

  // setup DMA
  dma_channel = dma_claim_unused_channel(true);

  dma_channel_config c;
  c = dma_channel_get_default_config(dma_channel);
  channel_config_set_dreq(&c, pio_get_dreq(audio_pio, pio_sm, true));
  channel_config_set_transfer_data_size(&c, DMA_SIZE_16); // free mono -> stereo!
  dma_channel_configure(
    dma_channel,
    &c,
    &audio_pio->txf[pio_sm],
    audio_buffer,
    AUDIO_BUFFER_SIZE,
    false
  );

  // enable irq
  dma_irqn_set_channel_enabled(dma_irq, dma_channel, true);
  irq_add_shared_handler(DMA_IRQ_0 + dma_irq, i2s_irq_handler, PICO_SHARED_IRQ_HANDLER_DEFAULT_ORDER_PRIORITY);
  irq_set_enabled(DMA_IRQ_0 + dma_irq, true);

  // start
  dma_channel_start(dma_channel);
  pio_sm_set_enabled(audio_pio, pio_sm, true);
}

void update_audio(uint32_t time) {
 if(need_refill) {
  auto buffer = audio_buffer + cur_write_buffer_index * AUDIO_BUFFER_SIZE;

  int count = AUDIO_BUFFER_SIZE;

#ifdef AUDIO_MAX_SAMPLE_UPDATE
  count -= refill_offset;
  buffer += refill_offset;
  if(count > AUDIO_MAX_SAMPLE_UPDATE)
    count = AUDIO_MAX_SAMPLE_UPDATE;

  refill_offset += count;
#endif

  for(int i = 0; i < count; i += 2) {
    int val = (int)blit::get_audio_frame() - 0x8000;
    // 22050 -> 44100
    *buffer++ = val;
    *buffer++ = val;
  }

#ifdef AUDIO_MAX_SAMPLE_UPDATE
  if(refill_offset < AUDIO_BUFFER_SIZE)
    return;

  refill_offset = 0;
#endif

  cur_write_buffer_index = (cur_write_buffer_index + 1) % AUDIO_NUM_BUFFERS;

  need_refill--;
 }
}