32blit-pico/dbi-spi.pio

.program dbi_raw
.side_set 1 opt

; raw serial, nothing special
.wrap_target
    out pins, 1 side 0
    nop         side 1
.wrap

; pixel doubling, "borrowed" from PicoSystem
.program dbi_pixel_double
.side_set 1 opt

.wrap_target

  pull                      ; fetch two pixels
  mov x, osr                ; both pixels in x register
  out y, 16                 ; second pixel in y register

; write first pixel (still in osr)

p1:
  out pins, 1   side 0      ; output bit, clear clock
  jmp !osre p1  side 1      ; if still bits in osr then jump back to start of loop and clock in data

; duplicate first pixel

  mov osr, x                ; move pixel data back into osr from register x
  out null, 16              ; discard second pixel
p1d:
  out pins, 1   side 0      ; output bit, clear clock
  jmp !osre p1d  side 1     ; if still bits in osr then jump back to start of loop and clock in data

; write second pixel

  mov osr, y                ; move pixel data back into osr from register y
  out null, 16              ; discard the 16-bits of dummy data from the mov
p2:
  out pins, 1   side 0      ; output bit, clear clock
  jmp !osre p2  side 1      ; if still bits in osr then jump back to start of loop and clock in data

; duplicate second pixel

  mov osr, y                ; move pixel data back into osr from register y
  out null, 16              ; discard as above..
p2d:
  out pins, 1   side 0      ; output bit, clear clock
  jmp !osre p2d  side 1     ; if still bits in osr then jump back to start of loop and clock in data

.wrap