| /** |
| * \file psa/crypto_extra.h |
| * |
| * \brief PSA cryptography module: Mbed TLS vendor extensions |
| * |
| * \note This file may not be included directly. Applications must |
| * include psa/crypto.h. |
| * |
| * This file is reserved for vendor-specific definitions. |
| */ |
| /* |
| * Copyright (C) 2018, ARM Limited, All Rights Reserved |
| * SPDX-License-Identifier: Apache-2.0 |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); you may |
| * not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| * This file is part of mbed TLS (https://tls.mbed.org) |
| */ |
| |
| #ifndef PSA_CRYPTO_EXTRA_H |
| #define PSA_CRYPTO_EXTRA_H |
| |
| #include "mbedtls/platform_util.h" |
| |
| #include "crypto_compat.h" |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* UID for secure storage seed */ |
| #define PSA_CRYPTO_ITS_RANDOM_SEED_UID 0xFFFFFF52 |
| |
| |
| /** \addtogroup attributes |
| * @{ |
| */ |
| |
| /** \brief Declare the enrollment algorithm for a key. |
| * |
| * An operation on a key may indifferently use the algorithm set with |
| * psa_set_key_algorithm() or with this function. |
| * |
| * \param[out] attributes The attribute structure to write to. |
| * \param alg2 A second algorithm that the key may be used |
| * for, in addition to the algorithm set with |
| * psa_set_key_algorithm(). |
| * |
| * \warning Setting an enrollment algorithm is not recommended, because |
| * using the same key with different algorithms can allow some |
| * attacks based on arithmetic relations between different |
| * computations made with the same key, or can escalate harmless |
| * side channels into exploitable ones. Use this function only |
| * if it is necessary to support a protocol for which it has been |
| * verified that the usage of the key with multiple algorithms |
| * is safe. |
| */ |
| static inline void psa_set_key_enrollment_algorithm( |
| psa_key_attributes_t *attributes, |
| psa_algorithm_t alg2) |
| { |
| attributes->core.policy.alg2 = alg2; |
| } |
| |
| /** Retrieve the enrollment algorithm policy from key attributes. |
| * |
| * \param[in] attributes The key attribute structure to query. |
| * |
| * \return The enrollment algorithm stored in the attribute structure. |
| */ |
| static inline psa_algorithm_t psa_get_key_enrollment_algorithm( |
| const psa_key_attributes_t *attributes) |
| { |
| return( attributes->core.policy.alg2 ); |
| } |
| |
| #if defined(MBEDTLS_PSA_CRYPTO_SE_C) |
| |
| /** Retrieve the slot number where a key is stored. |
| * |
| * A slot number is only defined for keys that are stored in a secure |
| * element. |
| * |
| * This information is only useful if the secure element is not entirely |
| * managed through the PSA Cryptography API. It is up to the secure |
| * element driver to decide how PSA slot numbers map to any other interface |
| * that the secure element may have. |
| * |
| * \param[in] attributes The key attribute structure to query. |
| * \param[out] slot_number On success, the slot number containing the key. |
| * |
| * \retval #PSA_SUCCESS |
| * The key is located in a secure element, and \p *slot_number |
| * indicates the slot number that contains it. |
| * \retval #PSA_ERROR_NOT_PERMITTED |
| * The caller is not permitted to query the slot number. |
| * Mbed Crypto currently does not return this error. |
| * \retval #PSA_ERROR_INVALID_ARGUMENT |
| * The key is not located in a secure element. |
| */ |
| psa_status_t psa_get_key_slot_number( |
| const psa_key_attributes_t *attributes, |
| psa_key_slot_number_t *slot_number ); |
| |
| /** Choose the slot number where a key is stored. |
| * |
| * This function declares a slot number in the specified attribute |
| * structure. |
| * |
| * A slot number is only meaningful for keys that are stored in a secure |
| * element. It is up to the secure element driver to decide how PSA slot |
| * numbers map to any other interface that the secure element may have. |
| * |
| * \note Setting a slot number in key attributes for a key creation can |
| * cause the following errors when creating the key: |
| * - #PSA_ERROR_NOT_SUPPORTED if the selected secure element does |
| * not support choosing a specific slot number. |
| * - #PSA_ERROR_NOT_PERMITTED if the caller is not permitted to |
| * choose slot numbers in general or to choose this specific slot. |
| * - #PSA_ERROR_INVALID_ARGUMENT if the chosen slot number is not |
| * valid in general or not valid for this specific key. |
| * - #PSA_ERROR_ALREADY_EXISTS if there is already a key in the |
| * selected slot. |
| * |
| * \param[out] attributes The attribute structure to write to. |
| * \param slot_number The slot number to set. |
| */ |
| static inline void psa_set_key_slot_number( |
| psa_key_attributes_t *attributes, |
| psa_key_slot_number_t slot_number ) |
| { |
| attributes->core.flags |= MBEDTLS_PSA_KA_FLAG_HAS_SLOT_NUMBER; |
| attributes->slot_number = slot_number; |
| } |
| |
| /** Remove the slot number attribute from a key attribute structure. |
| * |
| * This function undoes the action of psa_set_key_slot_number(). |
| * |
| * \param[out] attributes The attribute structure to write to. |
| */ |
| static inline void psa_clear_key_slot_number( |
| psa_key_attributes_t *attributes ) |
| { |
| attributes->core.flags &= ~MBEDTLS_PSA_KA_FLAG_HAS_SLOT_NUMBER; |
| } |
| |
| /** Register a key that is already present in a secure element. |
| * |
| * The key must be located in a secure element designated by the |
| * lifetime field in \p attributes, in the slot set with |
| * psa_set_key_slot_number() in the attribute structure. |
| * This function makes the key available through the key identifier |
| * specified in \p attributes. |
| * |
| * \param[in] attributes The attributes of the existing key. |
| * |
| * \retval #PSA_SUCCESS |
| * The key was successfully registered. |
| * Note that depending on the design of the driver, this may or may |
| * not guarantee that a key actually exists in the designated slot |
| * and is compatible with the specified attributes. |
| * \retval #PSA_ERROR_ALREADY_EXISTS |
| * There is already a key with the identifier specified in |
| * \p attributes. |
| * \retval #PSA_ERROR_NOT_SUPPORTED |
| * The secure element driver for the specified lifetime does not |
| * support registering a key. |
| * \retval #PSA_ERROR_INVALID_ARGUMENT |
| * \p attributes specifies a lifetime which is not located |
| * in a secure element. |
| * \retval #PSA_ERROR_INVALID_ARGUMENT |
| * No slot number is specified in \p attributes, |
| * or the specified slot number is not valid. |
| * \retval #PSA_ERROR_NOT_PERMITTED |
| * The caller is not authorized to register the specified key slot. |
| * \retval #PSA_ERROR_INSUFFICIENT_MEMORY |
| * \retval #PSA_ERROR_COMMUNICATION_FAILURE |
| * \retval #PSA_ERROR_HARDWARE_FAILURE |
| * \retval #PSA_ERROR_CORRUPTION_DETECTED |
| * \retval #PSA_ERROR_BAD_STATE |
| * The library has not been previously initialized by psa_crypto_init(). |
| * It is implementation-dependent whether a failure to initialize |
| * results in this error code. |
| */ |
| psa_status_t mbedtls_psa_register_se_key( |
| const psa_key_attributes_t *attributes); |
| |
| #endif /* MBEDTLS_PSA_CRYPTO_SE_C */ |
| |
| /**@}*/ |
| |
| /** |
| * \brief Library deinitialization. |
| * |
| * This function clears all data associated with the PSA layer, |
| * including the whole key store. |
| * |
| * This is an Mbed TLS extension. |
| */ |
| void mbedtls_psa_crypto_free( void ); |
| |
| /** \brief Statistics about |
| * resource consumption related to the PSA keystore. |
| * |
| * \note The content of this structure is not part of the stable API and ABI |
| * of Mbed Crypto and may change arbitrarily from version to version. |
| */ |
| typedef struct mbedtls_psa_stats_s |
| { |
| /** Number of slots containing key material for a volatile key. */ |
| size_t volatile_slots; |
| /** Number of slots containing key material for a key which is in |
| * internal persistent storage. */ |
| size_t persistent_slots; |
| /** Number of slots containing a reference to a key in a |
| * secure element. */ |
| size_t external_slots; |
| /** Number of slots which are occupied, but do not contain |
| * key material yet. */ |
| size_t half_filled_slots; |
| /** Number of slots that contain cache data. */ |
| size_t cache_slots; |
| /** Number of slots that are not used for anything. */ |
| size_t empty_slots; |
| /** Largest key id value among open keys in internal persistent storage. */ |
| psa_app_key_id_t max_open_internal_key_id; |
| /** Largest key id value among open keys in secure elements. */ |
| psa_app_key_id_t max_open_external_key_id; |
| } mbedtls_psa_stats_t; |
| |
| /** \brief Get statistics about |
| * resource consumption related to the PSA keystore. |
| * |
| * \note When Mbed Crypto is built as part of a service, with isolation |
| * between the application and the keystore, the service may or |
| * may not expose this function. |
| */ |
| void mbedtls_psa_get_stats( mbedtls_psa_stats_t *stats ); |
| |
| /** |
| * \brief Inject an initial entropy seed for the random generator into |
| * secure storage. |
| * |
| * This function injects data to be used as a seed for the random generator |
| * used by the PSA Crypto implementation. On devices that lack a trusted |
| * entropy source (preferably a hardware random number generator), |
| * the Mbed PSA Crypto implementation uses this value to seed its |
| * random generator. |
| * |
| * On devices without a trusted entropy source, this function must be |
| * called exactly once in the lifetime of the device. On devices with |
| * a trusted entropy source, calling this function is optional. |
| * In all cases, this function may only be called before calling any |
| * other function in the PSA Crypto API, including psa_crypto_init(). |
| * |
| * When this function returns successfully, it populates a file in |
| * persistent storage. Once the file has been created, this function |
| * can no longer succeed. |
| * |
| * If any error occurs, this function does not change the system state. |
| * You can call this function again after correcting the reason for the |
| * error if possible. |
| * |
| * \warning This function **can** fail! Callers MUST check the return status. |
| * |
| * \warning If you use this function, you should use it as part of a |
| * factory provisioning process. The value of the injected seed |
| * is critical to the security of the device. It must be |
| * *secret*, *unpredictable* and (statistically) *unique per device*. |
| * You should be generate it randomly using a cryptographically |
| * secure random generator seeded from trusted entropy sources. |
| * You should transmit it securely to the device and ensure |
| * that its value is not leaked or stored anywhere beyond the |
| * needs of transmitting it from the point of generation to |
| * the call of this function, and erase all copies of the value |
| * once this function returns. |
| * |
| * This is an Mbed TLS extension. |
| * |
| * \note This function is only available on the following platforms: |
| * * If the compile-time option MBEDTLS_PSA_INJECT_ENTROPY is enabled. |
| * Note that you must provide compatible implementations of |
| * mbedtls_nv_seed_read and mbedtls_nv_seed_write. |
| * * In a client-server integration of PSA Cryptography, on the client side, |
| * if the server supports this feature. |
| * \param[in] seed Buffer containing the seed value to inject. |
| * \param[in] seed_size Size of the \p seed buffer. |
| * The size of the seed in bytes must be greater |
| * or equal to both #MBEDTLS_ENTROPY_MIN_PLATFORM |
| * and #MBEDTLS_ENTROPY_BLOCK_SIZE. |
| * It must be less or equal to |
| * #MBEDTLS_ENTROPY_MAX_SEED_SIZE. |
| * |
| * \retval #PSA_SUCCESS |
| * The seed value was injected successfully. The random generator |
| * of the PSA Crypto implementation is now ready for use. |
| * You may now call psa_crypto_init() and use the PSA Crypto |
| * implementation. |
| * \retval #PSA_ERROR_INVALID_ARGUMENT |
| * \p seed_size is out of range. |
| * \retval #PSA_ERROR_STORAGE_FAILURE |
| * There was a failure reading or writing from storage. |
| * \retval #PSA_ERROR_NOT_PERMITTED |
| * The library has already been initialized. It is no longer |
| * possible to call this function. |
| */ |
| psa_status_t mbedtls_psa_inject_entropy(const uint8_t *seed, |
| size_t seed_size); |
| |
| /** \addtogroup crypto_types |
| * @{ |
| */ |
| |
| /** DSA public key. |
| * |
| * The import and export format is the |
| * representation of the public key `y = g^x mod p` as a big-endian byte |
| * string. The length of the byte string is the length of the base prime `p` |
| * in bytes. |
| */ |
| #define PSA_KEY_TYPE_DSA_PUBLIC_KEY ((psa_key_type_t)0x4002) |
| |
| /** DSA key pair (private and public key). |
| * |
| * The import and export format is the |
| * representation of the private key `x` as a big-endian byte string. The |
| * length of the byte string is the private key size in bytes (leading zeroes |
| * are not stripped). |
| * |
| * Determinstic DSA key derivation with psa_generate_derived_key follows |
| * FIPS 186-4 §B.1.2: interpret the byte string as integer |
| * in big-endian order. Discard it if it is not in the range |
| * [0, *N* - 2] where *N* is the boundary of the private key domain |
| * (the prime *p* for Diffie-Hellman, the subprime *q* for DSA, |
| * or the order of the curve's base point for ECC). |
| * Add 1 to the resulting integer and use this as the private key *x*. |
| * |
| */ |
| #define PSA_KEY_TYPE_DSA_KEY_PAIR ((psa_key_type_t)0x7002) |
| |
| /** Whether a key type is an DSA key (pair or public-only). */ |
| #define PSA_KEY_TYPE_IS_DSA(type) \ |
| (PSA_KEY_TYPE_PUBLIC_KEY_OF_KEY_PAIR(type) == PSA_KEY_TYPE_DSA_PUBLIC_KEY) |
| |
| #define PSA_ALG_DSA_BASE ((psa_algorithm_t)0x10040000) |
| /** DSA signature with hashing. |
| * |
| * This is the signature scheme defined by FIPS 186-4, |
| * with a random per-message secret number (*k*). |
| * |
| * \param hash_alg A hash algorithm (\c PSA_ALG_XXX value such that |
| * #PSA_ALG_IS_HASH(\p hash_alg) is true). |
| * This includes #PSA_ALG_ANY_HASH |
| * when specifying the algorithm in a usage policy. |
| * |
| * \return The corresponding DSA signature algorithm. |
| * \return Unspecified if \p hash_alg is not a supported |
| * hash algorithm. |
| */ |
| #define PSA_ALG_DSA(hash_alg) \ |
| (PSA_ALG_DSA_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) |
| #define PSA_ALG_DETERMINISTIC_DSA_BASE ((psa_algorithm_t)0x10050000) |
| #define PSA_ALG_DSA_DETERMINISTIC_FLAG PSA_ALG_ECDSA_DETERMINISTIC_FLAG |
| /** Deterministic DSA signature with hashing. |
| * |
| * This is the deterministic variant defined by RFC 6979 of |
| * the signature scheme defined by FIPS 186-4. |
| * |
| * \param hash_alg A hash algorithm (\c PSA_ALG_XXX value such that |
| * #PSA_ALG_IS_HASH(\p hash_alg) is true). |
| * This includes #PSA_ALG_ANY_HASH |
| * when specifying the algorithm in a usage policy. |
| * |
| * \return The corresponding DSA signature algorithm. |
| * \return Unspecified if \p hash_alg is not a supported |
| * hash algorithm. |
| */ |
| #define PSA_ALG_DETERMINISTIC_DSA(hash_alg) \ |
| (PSA_ALG_DETERMINISTIC_DSA_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) |
| #define PSA_ALG_IS_DSA(alg) \ |
| (((alg) & ~PSA_ALG_HASH_MASK & ~PSA_ALG_DSA_DETERMINISTIC_FLAG) == \ |
| PSA_ALG_DSA_BASE) |
| #define PSA_ALG_DSA_IS_DETERMINISTIC(alg) \ |
| (((alg) & PSA_ALG_DSA_DETERMINISTIC_FLAG) != 0) |
| #define PSA_ALG_IS_DETERMINISTIC_DSA(alg) \ |
| (PSA_ALG_IS_DSA(alg) && PSA_ALG_DSA_IS_DETERMINISTIC(alg)) |
| #define PSA_ALG_IS_RANDOMIZED_DSA(alg) \ |
| (PSA_ALG_IS_DSA(alg) && !PSA_ALG_DSA_IS_DETERMINISTIC(alg)) |
| |
| |
| /* We need to expand the sample definition of this macro from |
| * the API definition. */ |
| #undef PSA_ALG_IS_HASH_AND_SIGN |
| #define PSA_ALG_IS_HASH_AND_SIGN(alg) \ |
| (PSA_ALG_IS_RSA_PSS(alg) || PSA_ALG_IS_RSA_PKCS1V15_SIGN(alg) || \ |
| PSA_ALG_IS_DSA(alg) || PSA_ALG_IS_ECDSA(alg)) |
| |
| /**@}*/ |
| |
| /** \addtogroup attributes |
| * @{ |
| */ |
| |
| /** Custom Diffie-Hellman group. |
| * |
| * For keys of type #PSA_KEY_TYPE_DH_PUBLIC_KEY(#PSA_DH_GROUP_CUSTOM) or |
| * #PSA_KEY_TYPE_DH_KEY_PAIR(#PSA_DH_GROUP_CUSTOM), the group data comes |
| * from domain parameters set by psa_set_key_domain_parameters(). |
| */ |
| #define PSA_DH_GROUP_CUSTOM ((psa_dh_group_t) 0x7e) |
| |
| |
| /** |
| * \brief Set domain parameters for a key. |
| * |
| * Some key types require additional domain parameters in addition to |
| * the key type identifier and the key size. Use this function instead |
| * of psa_set_key_type() when you need to specify domain parameters. |
| * |
| * The format for the required domain parameters varies based on the key type. |
| * |
| * - For RSA keys (#PSA_KEY_TYPE_RSA_PUBLIC_KEY or #PSA_KEY_TYPE_RSA_KEY_PAIR), |
| * the domain parameter data consists of the public exponent, |
| * represented as a big-endian integer with no leading zeros. |
| * This information is used when generating an RSA key pair. |
| * When importing a key, the public exponent is read from the imported |
| * key data and the exponent recorded in the attribute structure is ignored. |
| * As an exception, the public exponent 65537 is represented by an empty |
| * byte string. |
| * - For DSA keys (#PSA_KEY_TYPE_DSA_PUBLIC_KEY or #PSA_KEY_TYPE_DSA_KEY_PAIR), |
| * the `Dss-Parms` format as defined by RFC 3279 §2.3.2. |
| * ``` |
| * Dss-Parms ::= SEQUENCE { |
| * p INTEGER, |
| * q INTEGER, |
| * g INTEGER |
| * } |
| * ``` |
| * - For Diffie-Hellman key exchange keys |
| * (#PSA_KEY_TYPE_DH_PUBLIC_KEY(#PSA_DH_GROUP_CUSTOM) or |
| * #PSA_KEY_TYPE_DH_KEY_PAIR(#PSA_DH_GROUP_CUSTOM)), the |
| * `DomainParameters` format as defined by RFC 3279 §2.3.3. |
| * ``` |
| * DomainParameters ::= SEQUENCE { |
| * p INTEGER, -- odd prime, p=jq +1 |
| * g INTEGER, -- generator, g |
| * q INTEGER, -- factor of p-1 |
| * j INTEGER OPTIONAL, -- subgroup factor |
| * validationParms ValidationParms OPTIONAL |
| * } |
| * ValidationParms ::= SEQUENCE { |
| * seed BIT STRING, |
| * pgenCounter INTEGER |
| * } |
| * ``` |
| * |
| * \note This function may allocate memory or other resources. |
| * Once you have called this function on an attribute structure, |
| * you must call psa_reset_key_attributes() to free these resources. |
| * |
| * \note This is an experimental extension to the interface. It may change |
| * in future versions of the library. |
| * |
| * \param[in,out] attributes Attribute structure where the specified domain |
| * parameters will be stored. |
| * If this function fails, the content of |
| * \p attributes is not modified. |
| * \param type Key type (a \c PSA_KEY_TYPE_XXX value). |
| * \param[in] data Buffer containing the key domain parameters. |
| * The content of this buffer is interpreted |
| * according to \p type as described above. |
| * \param data_length Size of the \p data buffer in bytes. |
| * |
| * \retval #PSA_SUCCESS |
| * \retval #PSA_ERROR_INVALID_ARGUMENT |
| * \retval #PSA_ERROR_NOT_SUPPORTED |
| * \retval #PSA_ERROR_INSUFFICIENT_MEMORY |
| */ |
| psa_status_t psa_set_key_domain_parameters(psa_key_attributes_t *attributes, |
| psa_key_type_t type, |
| const uint8_t *data, |
| size_t data_length); |
| |
| /** |
| * \brief Get domain parameters for a key. |
| * |
| * Get the domain parameters for a key with this function, if any. The format |
| * of the domain parameters written to \p data is specified in the |
| * documentation for psa_set_key_domain_parameters(). |
| * |
| * \note This is an experimental extension to the interface. It may change |
| * in future versions of the library. |
| * |
| * \param[in] attributes The key attribute structure to query. |
| * \param[out] data On success, the key domain parameters. |
| * \param data_size Size of the \p data buffer in bytes. |
| * The buffer is guaranteed to be large |
| * enough if its size in bytes is at least |
| * the value given by |
| * PSA_KEY_DOMAIN_PARAMETERS_SIZE(). |
| * \param[out] data_length On success, the number of bytes |
| * that make up the key domain parameters data. |
| * |
| * \retval #PSA_SUCCESS |
| * \retval #PSA_ERROR_BUFFER_TOO_SMALL |
| */ |
| psa_status_t psa_get_key_domain_parameters( |
| const psa_key_attributes_t *attributes, |
| uint8_t *data, |
| size_t data_size, |
| size_t *data_length); |
| |
| /** Safe output buffer size for psa_get_key_domain_parameters(). |
| * |
| * This macro returns a compile-time constant if its arguments are |
| * compile-time constants. |
| * |
| * \warning This function may call its arguments multiple times or |
| * zero times, so you should not pass arguments that contain |
| * side effects. |
| * |
| * \note This is an experimental extension to the interface. It may change |
| * in future versions of the library. |
| * |
| * \param key_type A supported key type. |
| * \param key_bits The size of the key in bits. |
| * |
| * \return If the parameters are valid and supported, return |
| * a buffer size in bytes that guarantees that |
| * psa_get_key_domain_parameters() will not fail with |
| * #PSA_ERROR_BUFFER_TOO_SMALL. |
| * If the parameters are a valid combination that is not supported |
| * by the implementation, this macro shall return either a |
| * sensible size or 0. |
| * If the parameters are not valid, the |
| * return value is unspecified. |
| */ |
| #define PSA_KEY_DOMAIN_PARAMETERS_SIZE(key_type, key_bits) \ |
| (PSA_KEY_TYPE_IS_RSA(key_type) ? sizeof(int) : \ |
| PSA_KEY_TYPE_IS_DH(key_type) ? PSA_DH_KEY_DOMAIN_PARAMETERS_SIZE(key_bits) : \ |
| PSA_KEY_TYPE_IS_DSA(key_type) ? PSA_DSA_KEY_DOMAIN_PARAMETERS_SIZE(key_bits) : \ |
| 0) |
| #define PSA_DH_KEY_DOMAIN_PARAMETERS_SIZE(key_bits) \ |
| (4 + (PSA_BITS_TO_BYTES(key_bits) + 5) * 3 /*without optional parts*/) |
| #define PSA_DSA_KEY_DOMAIN_PARAMETERS_SIZE(key_bits) \ |
| (4 + (PSA_BITS_TO_BYTES(key_bits) + 5) * 2 /*p, g*/ + 34 /*q*/) |
| |
| /**@}*/ |
| |
| /** \defgroup psa_tls_helpers TLS helper functions |
| * @{ |
| */ |
| |
| #if defined(MBEDTLS_ECP_C) |
| #include <mbedtls/ecp.h> |
| |
| /** Convert an ECC curve identifier from the Mbed TLS encoding to PSA. |
| * |
| * \note This function is provided solely for the convenience of |
| * Mbed TLS and may be removed at any time without notice. |
| * |
| * \param grpid An Mbed TLS elliptic curve identifier |
| * (`MBEDTLS_ECP_DP_xxx`). |
| * \param[out] bits On success, the bit size of the curve. |
| * |
| * \return The corresponding PSA elliptic curve identifier |
| * (`PSA_ECC_CURVE_xxx`). |
| * \return \c 0 on failure (\p grpid is not recognized). |
| */ |
| static inline psa_ecc_curve_t mbedtls_ecc_group_to_psa( mbedtls_ecp_group_id grpid, |
| size_t *bits ) |
| { |
| switch( grpid ) |
| { |
| case MBEDTLS_ECP_DP_SECP192R1: |
| *bits = 192; |
| return( PSA_ECC_CURVE_SECP_R1 ); |
| case MBEDTLS_ECP_DP_SECP224R1: |
| *bits = 224; |
| return( PSA_ECC_CURVE_SECP_R1 ); |
| case MBEDTLS_ECP_DP_SECP256R1: |
| *bits = 256; |
| return( PSA_ECC_CURVE_SECP_R1 ); |
| case MBEDTLS_ECP_DP_SECP384R1: |
| *bits = 384; |
| return( PSA_ECC_CURVE_SECP_R1 ); |
| case MBEDTLS_ECP_DP_SECP521R1: |
| *bits = 521; |
| return( PSA_ECC_CURVE_SECP_R1 ); |
| case MBEDTLS_ECP_DP_BP256R1: |
| *bits = 256; |
| return( PSA_ECC_CURVE_BRAINPOOL_P_R1 ); |
| case MBEDTLS_ECP_DP_BP384R1: |
| *bits = 384; |
| return( PSA_ECC_CURVE_BRAINPOOL_P_R1 ); |
| case MBEDTLS_ECP_DP_BP512R1: |
| *bits = 512; |
| return( PSA_ECC_CURVE_BRAINPOOL_P_R1 ); |
| case MBEDTLS_ECP_DP_CURVE25519: |
| *bits = 255; |
| return( PSA_ECC_CURVE_MONTGOMERY ); |
| case MBEDTLS_ECP_DP_SECP192K1: |
| *bits = 192; |
| return( PSA_ECC_CURVE_SECP_K1 ); |
| case MBEDTLS_ECP_DP_SECP224K1: |
| *bits = 224; |
| return( PSA_ECC_CURVE_SECP_K1 ); |
| case MBEDTLS_ECP_DP_SECP256K1: |
| *bits = 256; |
| return( PSA_ECC_CURVE_SECP_K1 ); |
| case MBEDTLS_ECP_DP_CURVE448: |
| *bits = 448; |
| return( PSA_ECC_CURVE_MONTGOMERY ); |
| default: |
| *bits = 0; |
| return( 0 ); |
| } |
| } |
| |
| /** Convert an ECC curve identifier from the PSA encoding to Mbed TLS. |
| * |
| * \note This function is provided solely for the convenience of |
| * Mbed TLS and may be removed at any time without notice. |
| * |
| * \param curve A PSA elliptic curve identifier |
| * (`PSA_ECC_CURVE_xxx`). |
| * \param byte_length The byte-length of a private key on \p curve. |
| * |
| * \return The corresponding Mbed TLS elliptic curve identifier |
| * (`MBEDTLS_ECP_DP_xxx`). |
| * \return #MBEDTLS_ECP_DP_NONE if \c curve is not recognized. |
| * \return #MBEDTLS_ECP_DP_NONE if \p byte_length is not |
| * correct for \p curve. |
| */ |
| mbedtls_ecp_group_id mbedtls_ecc_group_of_psa( psa_ecc_curve_t curve, |
| size_t byte_length ); |
| #endif /* MBEDTLS_ECP_C */ |
| |
| /**@}*/ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* PSA_CRYPTO_EXTRA_H */ |
