| /** |
| * \file psa/crypto_values.h |
| * |
| * \brief PSA cryptography module: macros to build and analyze integer values. |
| * |
| * \note This file may not be included directly. Applications must |
| * include psa/crypto.h. Drivers must include the appropriate driver |
| * header file. |
| * |
| * This file contains portable definitions of macros to build and analyze |
| * values of integral types that encode properties of cryptographic keys, |
| * designations of cryptographic algorithms, and error codes returned by |
| * the library. |
| * |
| * This header file only defines preprocessor macros. |
| */ |
| /* |
| * Copyright The Mbed TLS Contributors |
| * SPDX-License-Identifier: Apache-2.0 |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); you may |
| * not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #ifndef PSA_CRYPTO_VALUES_H |
| #define PSA_CRYPTO_VALUES_H |
| |
| /** \defgroup error Error codes |
| * @{ |
| */ |
| |
| /* PSA error codes */ |
| |
| /** The action was completed successfully. */ |
| #define PSA_SUCCESS ((psa_status_t)0) |
| |
| /** An error occurred that does not correspond to any defined |
| * failure cause. |
| * |
| * Implementations may use this error code if none of the other standard |
| * error codes are applicable. */ |
| #define PSA_ERROR_GENERIC_ERROR ((psa_status_t)-132) |
| |
| /** The requested operation or a parameter is not supported |
| * by this implementation. |
| * |
| * Implementations should return this error code when an enumeration |
| * parameter such as a key type, algorithm, etc. is not recognized. |
| * If a combination of parameters is recognized and identified as |
| * not valid, return #PSA_ERROR_INVALID_ARGUMENT instead. */ |
| #define PSA_ERROR_NOT_SUPPORTED ((psa_status_t)-134) |
| |
| /** The requested action is denied by a policy. |
| * |
| * Implementations should return this error code when the parameters |
| * are recognized as valid and supported, and a policy explicitly |
| * denies the requested operation. |
| * |
| * If a subset of the parameters of a function call identify a |
| * forbidden operation, and another subset of the parameters are |
| * not valid or not supported, it is unspecified whether the function |
| * returns #PSA_ERROR_NOT_PERMITTED, #PSA_ERROR_NOT_SUPPORTED or |
| * #PSA_ERROR_INVALID_ARGUMENT. */ |
| #define PSA_ERROR_NOT_PERMITTED ((psa_status_t)-133) |
| |
| /** An output buffer is too small. |
| * |
| * Applications can call the \c PSA_xxx_SIZE macro listed in the function |
| * description to determine a sufficient buffer size. |
| * |
| * Implementations should preferably return this error code only |
| * in cases when performing the operation with a larger output |
| * buffer would succeed. However implementations may return this |
| * error if a function has invalid or unsupported parameters in addition |
| * to the parameters that determine the necessary output buffer size. */ |
| #define PSA_ERROR_BUFFER_TOO_SMALL ((psa_status_t)-138) |
| |
| /** Asking for an item that already exists |
| * |
| * Implementations should return this error, when attempting |
| * to write an item (like a key) that already exists. */ |
| #define PSA_ERROR_ALREADY_EXISTS ((psa_status_t)-139) |
| |
| /** Asking for an item that doesn't exist |
| * |
| * Implementations should return this error, if a requested item (like |
| * a key) does not exist. */ |
| #define PSA_ERROR_DOES_NOT_EXIST ((psa_status_t)-140) |
| |
| /** The requested action cannot be performed in the current state. |
| * |
| * Multipart operations return this error when one of the |
| * functions is called out of sequence. Refer to the function |
| * descriptions for permitted sequencing of functions. |
| * |
| * Implementations shall not return this error code to indicate |
| * that a key either exists or not, |
| * but shall instead return #PSA_ERROR_ALREADY_EXISTS or #PSA_ERROR_DOES_NOT_EXIST |
| * as applicable. |
| * |
| * Implementations shall not return this error code to indicate that a |
| * key identifier is invalid, but shall return #PSA_ERROR_INVALID_HANDLE |
| * instead. */ |
| #define PSA_ERROR_BAD_STATE ((psa_status_t)-137) |
| |
| /** The parameters passed to the function are invalid. |
| * |
| * Implementations may return this error any time a parameter or |
| * combination of parameters are recognized as invalid. |
| * |
| * Implementations shall not return this error code to indicate that a |
| * key identifier is invalid, but shall return #PSA_ERROR_INVALID_HANDLE |
| * instead. |
| */ |
| #define PSA_ERROR_INVALID_ARGUMENT ((psa_status_t)-135) |
| |
| /** There is not enough runtime memory. |
| * |
| * If the action is carried out across multiple security realms, this |
| * error can refer to available memory in any of the security realms. */ |
| #define PSA_ERROR_INSUFFICIENT_MEMORY ((psa_status_t)-141) |
| |
| /** There is not enough persistent storage. |
| * |
| * Functions that modify the key storage return this error code if |
| * there is insufficient storage space on the host media. In addition, |
| * many functions that do not otherwise access storage may return this |
| * error code if the implementation requires a mandatory log entry for |
| * the requested action and the log storage space is full. */ |
| #define PSA_ERROR_INSUFFICIENT_STORAGE ((psa_status_t)-142) |
| |
| /** There was a communication failure inside the implementation. |
| * |
| * This can indicate a communication failure between the application |
| * and an external cryptoprocessor or between the cryptoprocessor and |
| * an external volatile or persistent memory. A communication failure |
| * may be transient or permanent depending on the cause. |
| * |
| * \warning If a function returns this error, it is undetermined |
| * whether the requested action has completed or not. Implementations |
| * should return #PSA_SUCCESS on successful completion whenever |
| * possible, however functions may return #PSA_ERROR_COMMUNICATION_FAILURE |
| * if the requested action was completed successfully in an external |
| * cryptoprocessor but there was a breakdown of communication before |
| * the cryptoprocessor could report the status to the application. |
| */ |
| #define PSA_ERROR_COMMUNICATION_FAILURE ((psa_status_t)-145) |
| |
| /** There was a storage failure that may have led to data loss. |
| * |
| * This error indicates that some persistent storage is corrupted. |
| * It should not be used for a corruption of volatile memory |
| * (use #PSA_ERROR_CORRUPTION_DETECTED), for a communication error |
| * between the cryptoprocessor and its external storage (use |
| * #PSA_ERROR_COMMUNICATION_FAILURE), or when the storage is |
| * in a valid state but is full (use #PSA_ERROR_INSUFFICIENT_STORAGE). |
| * |
| * Note that a storage failure does not indicate that any data that was |
| * previously read is invalid. However this previously read data may no |
| * longer be readable from storage. |
| * |
| * When a storage failure occurs, it is no longer possible to ensure |
| * the global integrity of the keystore. Depending on the global |
| * integrity guarantees offered by the implementation, access to other |
| * data may or may not fail even if the data is still readable but |
| * its integrity cannot be guaranteed. |
| * |
| * Implementations should only use this error code to report a |
| * permanent storage corruption. However application writers should |
| * keep in mind that transient errors while reading the storage may be |
| * reported using this error code. */ |
| #define PSA_ERROR_STORAGE_FAILURE ((psa_status_t)-146) |
| |
| /** A hardware failure was detected. |
| * |
| * A hardware failure may be transient or permanent depending on the |
| * cause. */ |
| #define PSA_ERROR_HARDWARE_FAILURE ((psa_status_t)-147) |
| |
| /** A tampering attempt was detected. |
| * |
| * If an application receives this error code, there is no guarantee |
| * that previously accessed or computed data was correct and remains |
| * confidential. Applications should not perform any security function |
| * and should enter a safe failure state. |
| * |
| * Implementations may return this error code if they detect an invalid |
| * state that cannot happen during normal operation and that indicates |
| * that the implementation's security guarantees no longer hold. Depending |
| * on the implementation architecture and on its security and safety goals, |
| * the implementation may forcibly terminate the application. |
| * |
| * This error code is intended as a last resort when a security breach |
| * is detected and it is unsure whether the keystore data is still |
| * protected. Implementations shall only return this error code |
| * to report an alarm from a tampering detector, to indicate that |
| * the confidentiality of stored data can no longer be guaranteed, |
| * or to indicate that the integrity of previously returned data is now |
| * considered compromised. Implementations shall not use this error code |
| * to indicate a hardware failure that merely makes it impossible to |
| * perform the requested operation (use #PSA_ERROR_COMMUNICATION_FAILURE, |
| * #PSA_ERROR_STORAGE_FAILURE, #PSA_ERROR_HARDWARE_FAILURE, |
| * #PSA_ERROR_INSUFFICIENT_ENTROPY or other applicable error code |
| * instead). |
| * |
| * This error indicates an attack against the application. Implementations |
| * shall not return this error code as a consequence of the behavior of |
| * the application itself. */ |
| #define PSA_ERROR_CORRUPTION_DETECTED ((psa_status_t)-151) |
| |
| /** There is not enough entropy to generate random data needed |
| * for the requested action. |
| * |
| * This error indicates a failure of a hardware random generator. |
| * Application writers should note that this error can be returned not |
| * only by functions whose purpose is to generate random data, such |
| * as key, IV or nonce generation, but also by functions that execute |
| * an algorithm with a randomized result, as well as functions that |
| * use randomization of intermediate computations as a countermeasure |
| * to certain attacks. |
| * |
| * Implementations should avoid returning this error after psa_crypto_init() |
| * has succeeded. Implementations should generate sufficient |
| * entropy during initialization and subsequently use a cryptographically |
| * secure pseudorandom generator (PRNG). However implementations may return |
| * this error at any time if a policy requires the PRNG to be reseeded |
| * during normal operation. */ |
| #define PSA_ERROR_INSUFFICIENT_ENTROPY ((psa_status_t)-148) |
| |
| /** The signature, MAC or hash is incorrect. |
| * |
| * Verification functions return this error if the verification |
| * calculations completed successfully, and the value to be verified |
| * was determined to be incorrect. |
| * |
| * If the value to verify has an invalid size, implementations may return |
| * either #PSA_ERROR_INVALID_ARGUMENT or #PSA_ERROR_INVALID_SIGNATURE. */ |
| #define PSA_ERROR_INVALID_SIGNATURE ((psa_status_t)-149) |
| |
| /** The decrypted padding is incorrect. |
| * |
| * \warning In some protocols, when decrypting data, it is essential that |
| * the behavior of the application does not depend on whether the padding |
| * is correct, down to precise timing. Applications should prefer |
| * protocols that use authenticated encryption rather than plain |
| * encryption. If the application must perform a decryption of |
| * unauthenticated data, the application writer should take care not |
| * to reveal whether the padding is invalid. |
| * |
| * Implementations should strive to make valid and invalid padding |
| * as close as possible to indistinguishable to an external observer. |
| * In particular, the timing of a decryption operation should not |
| * depend on the validity of the padding. */ |
| #define PSA_ERROR_INVALID_PADDING ((psa_status_t)-150) |
| |
| /** Return this error when there's insufficient data when attempting |
| * to read from a resource. */ |
| #define PSA_ERROR_INSUFFICIENT_DATA ((psa_status_t)-143) |
| |
| /** The key identifier is not valid. See also :ref:\`key-handles\`. |
| */ |
| #define PSA_ERROR_INVALID_HANDLE ((psa_status_t)-136) |
| |
| /** Stored data has been corrupted. |
| * |
| * This error indicates that some persistent storage has suffered corruption. |
| * It does not indicate the following situations, which have specific error |
| * codes: |
| * |
| * - A corruption of volatile memory - use #PSA_ERROR_CORRUPTION_DETECTED. |
| * - A communication error between the cryptoprocessor and its external |
| * storage - use #PSA_ERROR_COMMUNICATION_FAILURE. |
| * - When the storage is in a valid state but is full - use |
| * #PSA_ERROR_INSUFFICIENT_STORAGE. |
| * - When the storage fails for other reasons - use |
| * #PSA_ERROR_STORAGE_FAILURE. |
| * - When the stored data is not valid - use #PSA_ERROR_DATA_INVALID. |
| * |
| * \note A storage corruption does not indicate that any data that was |
| * previously read is invalid. However this previously read data might no |
| * longer be readable from storage. |
| * |
| * When a storage failure occurs, it is no longer possible to ensure the |
| * global integrity of the keystore. |
| */ |
| #define PSA_ERROR_DATA_CORRUPT ((psa_status_t)-152) |
| |
| /** Data read from storage is not valid for the implementation. |
| * |
| * This error indicates that some data read from storage does not have a valid |
| * format. It does not indicate the following situations, which have specific |
| * error codes: |
| * |
| * - When the storage or stored data is corrupted - use #PSA_ERROR_DATA_CORRUPT |
| * - When the storage fails for other reasons - use #PSA_ERROR_STORAGE_FAILURE |
| * - An invalid argument to the API - use #PSA_ERROR_INVALID_ARGUMENT |
| * |
| * This error is typically a result of either storage corruption on a |
| * cleartext storage backend, or an attempt to read data that was |
| * written by an incompatible version of the library. |
| */ |
| #define PSA_ERROR_DATA_INVALID ((psa_status_t)-153) |
| |
| /**@}*/ |
| |
| /** \defgroup crypto_types Key and algorithm types |
| * @{ |
| */ |
| |
| /** An invalid key type value. |
| * |
| * Zero is not the encoding of any key type. |
| */ |
| #define PSA_KEY_TYPE_NONE ((psa_key_type_t)0x0000) |
| |
| /** Vendor-defined key type flag. |
| * |
| * Key types defined by this standard will never have the |
| * #PSA_KEY_TYPE_VENDOR_FLAG bit set. Vendors who define additional key types |
| * must use an encoding with the #PSA_KEY_TYPE_VENDOR_FLAG bit set and should |
| * respect the bitwise structure used by standard encodings whenever practical. |
| */ |
| #define PSA_KEY_TYPE_VENDOR_FLAG ((psa_key_type_t)0x8000) |
| |
| #define PSA_KEY_TYPE_CATEGORY_MASK ((psa_key_type_t)0x7000) |
| #define PSA_KEY_TYPE_CATEGORY_RAW ((psa_key_type_t)0x1000) |
| #define PSA_KEY_TYPE_CATEGORY_SYMMETRIC ((psa_key_type_t)0x2000) |
| #define PSA_KEY_TYPE_CATEGORY_PUBLIC_KEY ((psa_key_type_t)0x4000) |
| #define PSA_KEY_TYPE_CATEGORY_KEY_PAIR ((psa_key_type_t)0x7000) |
| |
| #define PSA_KEY_TYPE_CATEGORY_FLAG_PAIR ((psa_key_type_t)0x3000) |
| |
| /** Whether a key type is vendor-defined. |
| * |
| * See also #PSA_KEY_TYPE_VENDOR_FLAG. |
| */ |
| #define PSA_KEY_TYPE_IS_VENDOR_DEFINED(type) \ |
| (((type) & PSA_KEY_TYPE_VENDOR_FLAG) != 0) |
| |
| /** Whether a key type is an unstructured array of bytes. |
| * |
| * This encompasses both symmetric keys and non-key data. |
| */ |
| #define PSA_KEY_TYPE_IS_UNSTRUCTURED(type) \ |
| (((type) & PSA_KEY_TYPE_CATEGORY_MASK) == PSA_KEY_TYPE_CATEGORY_RAW || \ |
| ((type) & PSA_KEY_TYPE_CATEGORY_MASK) == PSA_KEY_TYPE_CATEGORY_SYMMETRIC) |
| |
| /** Whether a key type is asymmetric: either a key pair or a public key. */ |
| #define PSA_KEY_TYPE_IS_ASYMMETRIC(type) \ |
| (((type) & PSA_KEY_TYPE_CATEGORY_MASK \ |
| & ~PSA_KEY_TYPE_CATEGORY_FLAG_PAIR) == \ |
| PSA_KEY_TYPE_CATEGORY_PUBLIC_KEY) |
| /** Whether a key type is the public part of a key pair. */ |
| #define PSA_KEY_TYPE_IS_PUBLIC_KEY(type) \ |
| (((type) & PSA_KEY_TYPE_CATEGORY_MASK) == PSA_KEY_TYPE_CATEGORY_PUBLIC_KEY) |
| /** Whether a key type is a key pair containing a private part and a public |
| * part. */ |
| #define PSA_KEY_TYPE_IS_KEY_PAIR(type) \ |
| (((type) & PSA_KEY_TYPE_CATEGORY_MASK) == PSA_KEY_TYPE_CATEGORY_KEY_PAIR) |
| /** The key pair type corresponding to a public key type. |
| * |
| * You may also pass a key pair type as \p type, it will be left unchanged. |
| * |
| * \param type A public key type or key pair type. |
| * |
| * \return The corresponding key pair type. |
| * If \p type is not a public key or a key pair, |
| * the return value is undefined. |
| */ |
| #define PSA_KEY_TYPE_KEY_PAIR_OF_PUBLIC_KEY(type) \ |
| ((type) | PSA_KEY_TYPE_CATEGORY_FLAG_PAIR) |
| /** The public key type corresponding to a key pair type. |
| * |
| * You may also pass a key pair type as \p type, it will be left unchanged. |
| * |
| * \param type A public key type or key pair type. |
| * |
| * \return The corresponding public key type. |
| * If \p type is not a public key or a key pair, |
| * the return value is undefined. |
| */ |
| #define PSA_KEY_TYPE_PUBLIC_KEY_OF_KEY_PAIR(type) \ |
| ((type) & ~PSA_KEY_TYPE_CATEGORY_FLAG_PAIR) |
| |
| /** Raw data. |
| * |
| * A "key" of this type cannot be used for any cryptographic operation. |
| * Applications may use this type to store arbitrary data in the keystore. */ |
| #define PSA_KEY_TYPE_RAW_DATA ((psa_key_type_t)0x1001) |
| |
| /** HMAC key. |
| * |
| * The key policy determines which underlying hash algorithm the key can be |
| * used for. |
| * |
| * HMAC keys should generally have the same size as the underlying hash. |
| * This size can be calculated with #PSA_HASH_LENGTH(\c alg) where |
| * \c alg is the HMAC algorithm or the underlying hash algorithm. */ |
| #define PSA_KEY_TYPE_HMAC ((psa_key_type_t)0x1100) |
| |
| /** A secret for key derivation. |
| * |
| * The key policy determines which key derivation algorithm the key |
| * can be used for. |
| */ |
| #define PSA_KEY_TYPE_DERIVE ((psa_key_type_t)0x1200) |
| |
| /** Key for a cipher, AEAD or MAC algorithm based on the AES block cipher. |
| * |
| * The size of the key can be 16 bytes (AES-128), 24 bytes (AES-192) or |
| * 32 bytes (AES-256). |
| */ |
| #define PSA_KEY_TYPE_AES ((psa_key_type_t)0x2400) |
| |
| /** Key for a cipher or MAC algorithm based on DES or 3DES (Triple-DES). |
| * |
| * The size of the key can be 8 bytes (single DES), 16 bytes (2-key 3DES) or |
| * 24 bytes (3-key 3DES). |
| * |
| * Note that single DES and 2-key 3DES are weak and strongly |
| * deprecated and should only be used to decrypt legacy data. 3-key 3DES |
| * is weak and deprecated and should only be used in legacy protocols. |
| */ |
| #define PSA_KEY_TYPE_DES ((psa_key_type_t)0x2301) |
| |
| /** Key for a cipher, AEAD or MAC algorithm based on the |
| * Camellia block cipher. */ |
| #define PSA_KEY_TYPE_CAMELLIA ((psa_key_type_t)0x2403) |
| |
| /** Key for the RC4 stream cipher. |
| * |
| * Note that RC4 is weak and deprecated and should only be used in |
| * legacy protocols. */ |
| #define PSA_KEY_TYPE_ARC4 ((psa_key_type_t)0x2002) |
| |
| /** Key for the ChaCha20 stream cipher or the Chacha20-Poly1305 AEAD algorithm. |
| * |
| * ChaCha20 and the ChaCha20_Poly1305 construction are defined in RFC 7539. |
| * |
| * Implementations must support 12-byte nonces, may support 8-byte nonces, |
| * and should reject other sizes. |
| */ |
| #define PSA_KEY_TYPE_CHACHA20 ((psa_key_type_t)0x2004) |
| |
| /** RSA public key. */ |
| #define PSA_KEY_TYPE_RSA_PUBLIC_KEY ((psa_key_type_t)0x4001) |
| /** RSA key pair (private and public key). */ |
| #define PSA_KEY_TYPE_RSA_KEY_PAIR ((psa_key_type_t)0x7001) |
| /** Whether a key type is an RSA key (pair or public-only). */ |
| #define PSA_KEY_TYPE_IS_RSA(type) \ |
| (PSA_KEY_TYPE_PUBLIC_KEY_OF_KEY_PAIR(type) == PSA_KEY_TYPE_RSA_PUBLIC_KEY) |
| |
| #define PSA_KEY_TYPE_ECC_PUBLIC_KEY_BASE ((psa_key_type_t)0x4100) |
| #define PSA_KEY_TYPE_ECC_KEY_PAIR_BASE ((psa_key_type_t)0x7100) |
| #define PSA_KEY_TYPE_ECC_CURVE_MASK ((psa_key_type_t)0x00ff) |
| /** Elliptic curve key pair. |
| * |
| * \param curve A value of type ::psa_ecc_family_t that |
| * identifies the ECC curve to be used. |
| */ |
| #define PSA_KEY_TYPE_ECC_KEY_PAIR(curve) \ |
| (PSA_KEY_TYPE_ECC_KEY_PAIR_BASE | (curve)) |
| /** Elliptic curve public key. |
| * |
| * \param curve A value of type ::psa_ecc_family_t that |
| * identifies the ECC curve to be used. |
| */ |
| #define PSA_KEY_TYPE_ECC_PUBLIC_KEY(curve) \ |
| (PSA_KEY_TYPE_ECC_PUBLIC_KEY_BASE | (curve)) |
| |
| /** Whether a key type is an elliptic curve key (pair or public-only). */ |
| #define PSA_KEY_TYPE_IS_ECC(type) \ |
| ((PSA_KEY_TYPE_PUBLIC_KEY_OF_KEY_PAIR(type) & \ |
| ~PSA_KEY_TYPE_ECC_CURVE_MASK) == PSA_KEY_TYPE_ECC_PUBLIC_KEY_BASE) |
| /** Whether a key type is an elliptic curve key pair. */ |
| #define PSA_KEY_TYPE_IS_ECC_KEY_PAIR(type) \ |
| (((type) & ~PSA_KEY_TYPE_ECC_CURVE_MASK) == \ |
| PSA_KEY_TYPE_ECC_KEY_PAIR_BASE) |
| /** Whether a key type is an elliptic curve public key. */ |
| #define PSA_KEY_TYPE_IS_ECC_PUBLIC_KEY(type) \ |
| (((type) & ~PSA_KEY_TYPE_ECC_CURVE_MASK) == \ |
| PSA_KEY_TYPE_ECC_PUBLIC_KEY_BASE) |
| |
| /** Extract the curve from an elliptic curve key type. */ |
| #define PSA_KEY_TYPE_ECC_GET_FAMILY(type) \ |
| ((psa_ecc_family_t) (PSA_KEY_TYPE_IS_ECC(type) ? \ |
| ((type) & PSA_KEY_TYPE_ECC_CURVE_MASK) : \ |
| 0)) |
| |
| /** SEC Koblitz curves over prime fields. |
| * |
| * This family comprises the following curves: |
| * secp192k1, secp224k1, secp256k1. |
| * They are defined in _Standards for Efficient Cryptography_, |
| * _SEC 2: Recommended Elliptic Curve Domain Parameters_. |
| * https://www.secg.org/sec2-v2.pdf |
| */ |
| #define PSA_ECC_FAMILY_SECP_K1 ((psa_ecc_family_t) 0x17) |
| |
| /** SEC random curves over prime fields. |
| * |
| * This family comprises the following curves: |
| * secp192k1, secp224r1, secp256r1, secp384r1, secp521r1. |
| * They are defined in _Standards for Efficient Cryptography_, |
| * _SEC 2: Recommended Elliptic Curve Domain Parameters_. |
| * https://www.secg.org/sec2-v2.pdf |
| */ |
| #define PSA_ECC_FAMILY_SECP_R1 ((psa_ecc_family_t) 0x12) |
| /* SECP160R2 (SEC2 v1, obsolete) */ |
| #define PSA_ECC_FAMILY_SECP_R2 ((psa_ecc_family_t) 0x1b) |
| |
| /** SEC Koblitz curves over binary fields. |
| * |
| * This family comprises the following curves: |
| * sect163k1, sect233k1, sect239k1, sect283k1, sect409k1, sect571k1. |
| * They are defined in _Standards for Efficient Cryptography_, |
| * _SEC 2: Recommended Elliptic Curve Domain Parameters_. |
| * https://www.secg.org/sec2-v2.pdf |
| */ |
| #define PSA_ECC_FAMILY_SECT_K1 ((psa_ecc_family_t) 0x27) |
| |
| /** SEC random curves over binary fields. |
| * |
| * This family comprises the following curves: |
| * sect163r1, sect233r1, sect283r1, sect409r1, sect571r1. |
| * They are defined in _Standards for Efficient Cryptography_, |
| * _SEC 2: Recommended Elliptic Curve Domain Parameters_. |
| * https://www.secg.org/sec2-v2.pdf |
| */ |
| #define PSA_ECC_FAMILY_SECT_R1 ((psa_ecc_family_t) 0x22) |
| |
| /** SEC additional random curves over binary fields. |
| * |
| * This family comprises the following curve: |
| * sect163r2. |
| * It is defined in _Standards for Efficient Cryptography_, |
| * _SEC 2: Recommended Elliptic Curve Domain Parameters_. |
| * https://www.secg.org/sec2-v2.pdf |
| */ |
| #define PSA_ECC_FAMILY_SECT_R2 ((psa_ecc_family_t) 0x2b) |
| |
| /** Brainpool P random curves. |
| * |
| * This family comprises the following curves: |
| * brainpoolP160r1, brainpoolP192r1, brainpoolP224r1, brainpoolP256r1, |
| * brainpoolP320r1, brainpoolP384r1, brainpoolP512r1. |
| * It is defined in RFC 5639. |
| */ |
| #define PSA_ECC_FAMILY_BRAINPOOL_P_R1 ((psa_ecc_family_t) 0x30) |
| |
| /** Curve25519 and Curve448. |
| * |
| * This family comprises the following Montgomery curves: |
| * - 255-bit: Bernstein et al., |
| * _Curve25519: new Diffie-Hellman speed records_, LNCS 3958, 2006. |
| * The algorithm #PSA_ALG_ECDH performs X25519 when used with this curve. |
| * - 448-bit: Hamburg, |
| * _Ed448-Goldilocks, a new elliptic curve_, NIST ECC Workshop, 2015. |
| * The algorithm #PSA_ALG_ECDH performs X448 when used with this curve. |
| */ |
| #define PSA_ECC_FAMILY_MONTGOMERY ((psa_ecc_family_t) 0x41) |
| |
| #define PSA_KEY_TYPE_DH_PUBLIC_KEY_BASE ((psa_key_type_t)0x4200) |
| #define PSA_KEY_TYPE_DH_KEY_PAIR_BASE ((psa_key_type_t)0x7200) |
| #define PSA_KEY_TYPE_DH_GROUP_MASK ((psa_key_type_t)0x00ff) |
| /** Diffie-Hellman key pair. |
| * |
| * \param group A value of type ::psa_dh_family_t that identifies the |
| * Diffie-Hellman group to be used. |
| */ |
| #define PSA_KEY_TYPE_DH_KEY_PAIR(group) \ |
| (PSA_KEY_TYPE_DH_KEY_PAIR_BASE | (group)) |
| /** Diffie-Hellman public key. |
| * |
| * \param group A value of type ::psa_dh_family_t that identifies the |
| * Diffie-Hellman group to be used. |
| */ |
| #define PSA_KEY_TYPE_DH_PUBLIC_KEY(group) \ |
| (PSA_KEY_TYPE_DH_PUBLIC_KEY_BASE | (group)) |
| |
| /** Whether a key type is a Diffie-Hellman key (pair or public-only). */ |
| #define PSA_KEY_TYPE_IS_DH(type) \ |
| ((PSA_KEY_TYPE_PUBLIC_KEY_OF_KEY_PAIR(type) & \ |
| ~PSA_KEY_TYPE_DH_GROUP_MASK) == PSA_KEY_TYPE_DH_PUBLIC_KEY_BASE) |
| /** Whether a key type is a Diffie-Hellman key pair. */ |
| #define PSA_KEY_TYPE_IS_DH_KEY_PAIR(type) \ |
| (((type) & ~PSA_KEY_TYPE_DH_GROUP_MASK) == \ |
| PSA_KEY_TYPE_DH_KEY_PAIR_BASE) |
| /** Whether a key type is a Diffie-Hellman public key. */ |
| #define PSA_KEY_TYPE_IS_DH_PUBLIC_KEY(type) \ |
| (((type) & ~PSA_KEY_TYPE_DH_GROUP_MASK) == \ |
| PSA_KEY_TYPE_DH_PUBLIC_KEY_BASE) |
| |
| /** Extract the group from a Diffie-Hellman key type. */ |
| #define PSA_KEY_TYPE_DH_GET_FAMILY(type) \ |
| ((psa_dh_family_t) (PSA_KEY_TYPE_IS_DH(type) ? \ |
| ((type) & PSA_KEY_TYPE_DH_GROUP_MASK) : \ |
| 0)) |
| |
| /** Diffie-Hellman groups defined in RFC 7919 Appendix A. |
| * |
| * This family includes groups with the following key sizes (in bits): |
| * 2048, 3072, 4096, 6144, 8192. A given implementation may support |
| * all of these sizes or only a subset. |
| */ |
| #define PSA_DH_FAMILY_RFC7919 ((psa_dh_family_t) 0x03) |
| |
| #define PSA_GET_KEY_TYPE_BLOCK_SIZE_EXPONENT(type) \ |
| (((type) >> 8) & 7) |
| /** The block size of a block cipher. |
| * |
| * \param type A cipher key type (value of type #psa_key_type_t). |
| * |
| * \return The block size for a block cipher, or 1 for a stream cipher. |
| * The return value is undefined if \p type is not a supported |
| * cipher key type. |
| * |
| * \note It is possible to build stream cipher algorithms on top of a block |
| * cipher, for example CTR mode (#PSA_ALG_CTR). |
| * This macro only takes the key type into account, so it cannot be |
| * used to determine the size of the data that #psa_cipher_update() |
| * might buffer for future processing in general. |
| * |
| * \note This macro returns a compile-time constant if its argument is one. |
| * |
| * \warning This macro may evaluate its argument multiple times. |
| */ |
| #define PSA_BLOCK_CIPHER_BLOCK_LENGTH(type) \ |
| (((type) & PSA_KEY_TYPE_CATEGORY_MASK) == PSA_KEY_TYPE_CATEGORY_SYMMETRIC ? \ |
| 1u << PSA_GET_KEY_TYPE_BLOCK_SIZE_EXPONENT(type) : \ |
| 0u) |
| |
| /** Vendor-defined algorithm flag. |
| * |
| * Algorithms defined by this standard will never have the #PSA_ALG_VENDOR_FLAG |
| * bit set. Vendors who define additional algorithms must use an encoding with |
| * the #PSA_ALG_VENDOR_FLAG bit set and should respect the bitwise structure |
| * used by standard encodings whenever practical. |
| */ |
| #define PSA_ALG_VENDOR_FLAG ((psa_algorithm_t)0x80000000) |
| |
| #define PSA_ALG_CATEGORY_MASK ((psa_algorithm_t)0x7f000000) |
| #define PSA_ALG_CATEGORY_HASH ((psa_algorithm_t)0x02000000) |
| #define PSA_ALG_CATEGORY_MAC ((psa_algorithm_t)0x03000000) |
| #define PSA_ALG_CATEGORY_CIPHER ((psa_algorithm_t)0x04000000) |
| #define PSA_ALG_CATEGORY_AEAD ((psa_algorithm_t)0x05000000) |
| #define PSA_ALG_CATEGORY_SIGN ((psa_algorithm_t)0x06000000) |
| #define PSA_ALG_CATEGORY_ASYMMETRIC_ENCRYPTION ((psa_algorithm_t)0x07000000) |
| #define PSA_ALG_CATEGORY_KEY_DERIVATION ((psa_algorithm_t)0x08000000) |
| #define PSA_ALG_CATEGORY_KEY_AGREEMENT ((psa_algorithm_t)0x09000000) |
| |
| /** Whether an algorithm is vendor-defined. |
| * |
| * See also #PSA_ALG_VENDOR_FLAG. |
| */ |
| #define PSA_ALG_IS_VENDOR_DEFINED(alg) \ |
| (((alg) & PSA_ALG_VENDOR_FLAG) != 0) |
| |
| /** Whether the specified algorithm is a hash algorithm. |
| * |
| * \param alg An algorithm identifier (value of type #psa_algorithm_t). |
| * |
| * \return 1 if \p alg is a hash algorithm, 0 otherwise. |
| * This macro may return either 0 or 1 if \p alg is not a supported |
| * algorithm identifier. |
| */ |
| #define PSA_ALG_IS_HASH(alg) \ |
| (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_HASH) |
| |
| /** Whether the specified algorithm is a MAC algorithm. |
| * |
| * \param alg An algorithm identifier (value of type #psa_algorithm_t). |
| * |
| * \return 1 if \p alg is a MAC algorithm, 0 otherwise. |
| * This macro may return either 0 or 1 if \p alg is not a supported |
| * algorithm identifier. |
| */ |
| #define PSA_ALG_IS_MAC(alg) \ |
| (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_MAC) |
| |
| /** Whether the specified algorithm is a symmetric cipher algorithm. |
| * |
| * \param alg An algorithm identifier (value of type #psa_algorithm_t). |
| * |
| * \return 1 if \p alg is a symmetric cipher algorithm, 0 otherwise. |
| * This macro may return either 0 or 1 if \p alg is not a supported |
| * algorithm identifier. |
| */ |
| #define PSA_ALG_IS_CIPHER(alg) \ |
| (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_CIPHER) |
| |
| /** Whether the specified algorithm is an authenticated encryption |
| * with associated data (AEAD) algorithm. |
| * |
| * \param alg An algorithm identifier (value of type #psa_algorithm_t). |
| * |
| * \return 1 if \p alg is an AEAD algorithm, 0 otherwise. |
| * This macro may return either 0 or 1 if \p alg is not a supported |
| * algorithm identifier. |
| */ |
| #define PSA_ALG_IS_AEAD(alg) \ |
| (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_AEAD) |
| |
| /** Whether the specified algorithm is an asymmetric signature algorithm, |
| * also known as public-key signature algorithm. |
| * |
| * \param alg An algorithm identifier (value of type #psa_algorithm_t). |
| * |
| * \return 1 if \p alg is an asymmetric signature algorithm, 0 otherwise. |
| * This macro may return either 0 or 1 if \p alg is not a supported |
| * algorithm identifier. |
| */ |
| #define PSA_ALG_IS_SIGN(alg) \ |
| (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_SIGN) |
| |
| /** Whether the specified algorithm is an asymmetric encryption algorithm, |
| * also known as public-key encryption algorithm. |
| * |
| * \param alg An algorithm identifier (value of type #psa_algorithm_t). |
| * |
| * \return 1 if \p alg is an asymmetric encryption algorithm, 0 otherwise. |
| * This macro may return either 0 or 1 if \p alg is not a supported |
| * algorithm identifier. |
| */ |
| #define PSA_ALG_IS_ASYMMETRIC_ENCRYPTION(alg) \ |
| (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_ASYMMETRIC_ENCRYPTION) |
| |
| /** Whether the specified algorithm is a key agreement algorithm. |
| * |
| * \param alg An algorithm identifier (value of type #psa_algorithm_t). |
| * |
| * \return 1 if \p alg is a key agreement algorithm, 0 otherwise. |
| * This macro may return either 0 or 1 if \p alg is not a supported |
| * algorithm identifier. |
| */ |
| #define PSA_ALG_IS_KEY_AGREEMENT(alg) \ |
| (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_KEY_AGREEMENT) |
| |
| /** Whether the specified algorithm is a key derivation algorithm. |
| * |
| * \param alg An algorithm identifier (value of type #psa_algorithm_t). |
| * |
| * \return 1 if \p alg is a key derivation algorithm, 0 otherwise. |
| * This macro may return either 0 or 1 if \p alg is not a supported |
| * algorithm identifier. |
| */ |
| #define PSA_ALG_IS_KEY_DERIVATION(alg) \ |
| (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_KEY_DERIVATION) |
| |
| #define PSA_ALG_HASH_MASK ((psa_algorithm_t)0x000000ff) |
| /** MD2 */ |
| #define PSA_ALG_MD2 ((psa_algorithm_t)0x02000001) |
| /** MD4 */ |
| #define PSA_ALG_MD4 ((psa_algorithm_t)0x02000002) |
| /** MD5 */ |
| #define PSA_ALG_MD5 ((psa_algorithm_t)0x02000003) |
| /** PSA_ALG_RIPEMD160 */ |
| #define PSA_ALG_RIPEMD160 ((psa_algorithm_t)0x02000004) |
| /** SHA1 */ |
| #define PSA_ALG_SHA_1 ((psa_algorithm_t)0x02000005) |
| /** SHA2-224 */ |
| #define PSA_ALG_SHA_224 ((psa_algorithm_t)0x02000008) |
| /** SHA2-256 */ |
| #define PSA_ALG_SHA_256 ((psa_algorithm_t)0x02000009) |
| /** SHA2-384 */ |
| #define PSA_ALG_SHA_384 ((psa_algorithm_t)0x0200000a) |
| /** SHA2-512 */ |
| #define PSA_ALG_SHA_512 ((psa_algorithm_t)0x0200000b) |
| /** SHA2-512/224 */ |
| #define PSA_ALG_SHA_512_224 ((psa_algorithm_t)0x0200000c) |
| /** SHA2-512/256 */ |
| #define PSA_ALG_SHA_512_256 ((psa_algorithm_t)0x0200000d) |
| /** SHA3-224 */ |
| #define PSA_ALG_SHA3_224 ((psa_algorithm_t)0x02000010) |
| /** SHA3-256 */ |
| #define PSA_ALG_SHA3_256 ((psa_algorithm_t)0x02000011) |
| /** SHA3-384 */ |
| #define PSA_ALG_SHA3_384 ((psa_algorithm_t)0x02000012) |
| /** SHA3-512 */ |
| #define PSA_ALG_SHA3_512 ((psa_algorithm_t)0x02000013) |
| |
| /** In a hash-and-sign algorithm policy, allow any hash algorithm. |
| * |
| * This value may be used to form the algorithm usage field of a policy |
| * for a signature algorithm that is parametrized by a hash. The key |
| * may then be used to perform operations using the same signature |
| * algorithm parametrized with any supported hash. |
| * |
| * That is, suppose that `PSA_xxx_SIGNATURE` is one of the following macros: |
| * - #PSA_ALG_RSA_PKCS1V15_SIGN, #PSA_ALG_RSA_PSS, |
| * - #PSA_ALG_ECDSA, #PSA_ALG_DETERMINISTIC_ECDSA. |
| * Then you may create and use a key as follows: |
| * - Set the key usage field using #PSA_ALG_ANY_HASH, for example: |
| * ``` |
| * psa_set_key_usage_flags(&attributes, PSA_KEY_USAGE_SIGN_HASH); // or VERIFY |
| * psa_set_key_algorithm(&attributes, PSA_xxx_SIGNATURE(PSA_ALG_ANY_HASH)); |
| * ``` |
| * - Import or generate key material. |
| * - Call psa_sign_hash() or psa_verify_hash(), passing |
| * an algorithm built from `PSA_xxx_SIGNATURE` and a specific hash. Each |
| * call to sign or verify a message may use a different hash. |
| * ``` |
| * psa_sign_hash(key, PSA_xxx_SIGNATURE(PSA_ALG_SHA_256), ...); |
| * psa_sign_hash(key, PSA_xxx_SIGNATURE(PSA_ALG_SHA_512), ...); |
| * psa_sign_hash(key, PSA_xxx_SIGNATURE(PSA_ALG_SHA3_256), ...); |
| * ``` |
| * |
| * This value may not be used to build other algorithms that are |
| * parametrized over a hash. For any valid use of this macro to build |
| * an algorithm \c alg, #PSA_ALG_IS_HASH_AND_SIGN(\c alg) is true. |
| * |
| * This value may not be used to build an algorithm specification to |
| * perform an operation. It is only valid to build policies. |
| */ |
| #define PSA_ALG_ANY_HASH ((psa_algorithm_t)0x020000ff) |
| |
| #define PSA_ALG_MAC_SUBCATEGORY_MASK ((psa_algorithm_t)0x00c00000) |
| #define PSA_ALG_HMAC_BASE ((psa_algorithm_t)0x03800000) |
| /** Macro to build an HMAC algorithm. |
| * |
| * For example, #PSA_ALG_HMAC(#PSA_ALG_SHA_256) is HMAC-SHA-256. |
| * |
| * \param hash_alg A hash algorithm (\c PSA_ALG_XXX value such that |
| * #PSA_ALG_IS_HASH(\p hash_alg) is true). |
| * |
| * \return The corresponding HMAC algorithm. |
| * \return Unspecified if \p hash_alg is not a supported |
| * hash algorithm. |
| */ |
| #define PSA_ALG_HMAC(hash_alg) \ |
| (PSA_ALG_HMAC_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) |
| |
| #define PSA_ALG_HMAC_GET_HASH(hmac_alg) \ |
| (PSA_ALG_CATEGORY_HASH | ((hmac_alg) & PSA_ALG_HASH_MASK)) |
| |
| /** Whether the specified algorithm is an HMAC algorithm. |
| * |
| * HMAC is a family of MAC algorithms that are based on a hash function. |
| * |
| * \param alg An algorithm identifier (value of type #psa_algorithm_t). |
| * |
| * \return 1 if \p alg is an HMAC algorithm, 0 otherwise. |
| * This macro may return either 0 or 1 if \p alg is not a supported |
| * algorithm identifier. |
| */ |
| #define PSA_ALG_IS_HMAC(alg) \ |
| (((alg) & (PSA_ALG_CATEGORY_MASK | PSA_ALG_MAC_SUBCATEGORY_MASK)) == \ |
| PSA_ALG_HMAC_BASE) |
| |
| /* In the encoding of a MAC algorithm, the bits corresponding to |
| * PSA_ALG_MAC_TRUNCATION_MASK encode the length to which the MAC is |
| * truncated. As an exception, the value 0 means the untruncated algorithm, |
| * whatever its length is. The length is encoded in 6 bits, so it can |
| * reach up to 63; the largest MAC is 64 bytes so its trivial truncation |
| * to full length is correctly encoded as 0 and any non-trivial truncation |
| * is correctly encoded as a value between 1 and 63. */ |
| #define PSA_ALG_MAC_TRUNCATION_MASK ((psa_algorithm_t)0x003f0000) |
| #define PSA_MAC_TRUNCATION_OFFSET 16 |
| |
| /** Macro to build a truncated MAC algorithm. |
| * |
| * A truncated MAC algorithm is identical to the corresponding MAC |
| * algorithm except that the MAC value for the truncated algorithm |
| * consists of only the first \p mac_length bytes of the MAC value |
| * for the untruncated algorithm. |
| * |
| * \note This macro may allow constructing algorithm identifiers that |
| * are not valid, either because the specified length is larger |
| * than the untruncated MAC or because the specified length is |
| * smaller than permitted by the implementation. |
| * |
| * \note It is implementation-defined whether a truncated MAC that |
| * is truncated to the same length as the MAC of the untruncated |
| * algorithm is considered identical to the untruncated algorithm |
| * for policy comparison purposes. |
| * |
| * \param mac_alg A MAC algorithm identifier (value of type |
| * #psa_algorithm_t such that #PSA_ALG_IS_MAC(\p alg) |
| * is true). This may be a truncated or untruncated |
| * MAC algorithm. |
| * \param mac_length Desired length of the truncated MAC in bytes. |
| * This must be at most the full length of the MAC |
| * and must be at least an implementation-specified |
| * minimum. The implementation-specified minimum |
| * shall not be zero. |
| * |
| * \return The corresponding MAC algorithm with the specified |
| * length. |
| * \return Unspecified if \p alg is not a supported |
| * MAC algorithm or if \p mac_length is too small or |
| * too large for the specified MAC algorithm. |
| */ |
| #define PSA_ALG_TRUNCATED_MAC(mac_alg, mac_length) \ |
| (((mac_alg) & ~PSA_ALG_MAC_TRUNCATION_MASK) | \ |
| ((mac_length) << PSA_MAC_TRUNCATION_OFFSET & PSA_ALG_MAC_TRUNCATION_MASK)) |
| |
| /** Macro to build the base MAC algorithm corresponding to a truncated |
| * MAC algorithm. |
| * |
| * \param mac_alg A MAC algorithm identifier (value of type |
| * #psa_algorithm_t such that #PSA_ALG_IS_MAC(\p alg) |
| * is true). This may be a truncated or untruncated |
| * MAC algorithm. |
| * |
| * \return The corresponding base MAC algorithm. |
| * \return Unspecified if \p alg is not a supported |
| * MAC algorithm. |
| */ |
| #define PSA_ALG_FULL_LENGTH_MAC(mac_alg) \ |
| ((mac_alg) & ~PSA_ALG_MAC_TRUNCATION_MASK) |
| |
| /** Length to which a MAC algorithm is truncated. |
| * |
| * \param mac_alg A MAC algorithm identifier (value of type |
| * #psa_algorithm_t such that #PSA_ALG_IS_MAC(\p alg) |
| * is true). |
| * |
| * \return Length of the truncated MAC in bytes. |
| * \return 0 if \p alg is a non-truncated MAC algorithm. |
| * \return Unspecified if \p alg is not a supported |
| * MAC algorithm. |
| */ |
| #define PSA_MAC_TRUNCATED_LENGTH(mac_alg) \ |
| (((mac_alg) & PSA_ALG_MAC_TRUNCATION_MASK) >> PSA_MAC_TRUNCATION_OFFSET) |
| |
| #define PSA_ALG_CIPHER_MAC_BASE ((psa_algorithm_t)0x03c00000) |
| /** The CBC-MAC construction over a block cipher |
| * |
| * \warning CBC-MAC is insecure in many cases. |
| * A more secure mode, such as #PSA_ALG_CMAC, is recommended. |
| */ |
| #define PSA_ALG_CBC_MAC ((psa_algorithm_t)0x03c00100) |
| /** The CMAC construction over a block cipher */ |
| #define PSA_ALG_CMAC ((psa_algorithm_t)0x03c00200) |
| |
| /** Whether the specified algorithm is a MAC algorithm based on a block cipher. |
| * |
| * \param alg An algorithm identifier (value of type #psa_algorithm_t). |
| * |
| * \return 1 if \p alg is a MAC algorithm based on a block cipher, 0 otherwise. |
| * This macro may return either 0 or 1 if \p alg is not a supported |
| * algorithm identifier. |
| */ |
| #define PSA_ALG_IS_BLOCK_CIPHER_MAC(alg) \ |
| (((alg) & (PSA_ALG_CATEGORY_MASK | PSA_ALG_MAC_SUBCATEGORY_MASK)) == \ |
| PSA_ALG_CIPHER_MAC_BASE) |
| |
| #define PSA_ALG_CIPHER_STREAM_FLAG ((psa_algorithm_t)0x00800000) |
| #define PSA_ALG_CIPHER_FROM_BLOCK_FLAG ((psa_algorithm_t)0x00400000) |
| |
| /** Whether the specified algorithm is a stream cipher. |
| * |
| * A stream cipher is a symmetric cipher that encrypts or decrypts messages |
| * by applying a bitwise-xor with a stream of bytes that is generated |
| * from a key. |
| * |
| * \param alg An algorithm identifier (value of type #psa_algorithm_t). |
| * |
| * \return 1 if \p alg is a stream cipher algorithm, 0 otherwise. |
| * This macro may return either 0 or 1 if \p alg is not a supported |
| * algorithm identifier or if it is not a symmetric cipher algorithm. |
| */ |
| #define PSA_ALG_IS_STREAM_CIPHER(alg) \ |
| (((alg) & (PSA_ALG_CATEGORY_MASK | PSA_ALG_CIPHER_STREAM_FLAG)) == \ |
| (PSA_ALG_CATEGORY_CIPHER | PSA_ALG_CIPHER_STREAM_FLAG)) |
| |
| /** The stream cipher mode of a stream cipher algorithm. |
| * |
| * The underlying stream cipher is determined by the key type. |
| * - To use ChaCha20, use a key type of #PSA_KEY_TYPE_CHACHA20. |
| * - To use ARC4, use a key type of #PSA_KEY_TYPE_ARC4. |
| */ |
| #define PSA_ALG_STREAM_CIPHER ((psa_algorithm_t)0x04800100) |
| |
| /** The CTR stream cipher mode. |
| * |
| * CTR is a stream cipher which is built from a block cipher. |
| * The underlying block cipher is determined by the key type. |
| * For example, to use AES-128-CTR, use this algorithm with |
| * a key of type #PSA_KEY_TYPE_AES and a length of 128 bits (16 bytes). |
| */ |
| #define PSA_ALG_CTR ((psa_algorithm_t)0x04c01000) |
| |
| /** The CFB stream cipher mode. |
| * |
| * The underlying block cipher is determined by the key type. |
| */ |
| #define PSA_ALG_CFB ((psa_algorithm_t)0x04c01100) |
| |
| /** The OFB stream cipher mode. |
| * |
| * The underlying block cipher is determined by the key type. |
| */ |
| #define PSA_ALG_OFB ((psa_algorithm_t)0x04c01200) |
| |
| /** The XTS cipher mode. |
| * |
| * XTS is a cipher mode which is built from a block cipher. It requires at |
| * least one full block of input, but beyond this minimum the input |
| * does not need to be a whole number of blocks. |
| */ |
| #define PSA_ALG_XTS ((psa_algorithm_t)0x0440ff00) |
| |
| /** The Electronic Code Book (ECB) mode of a block cipher, with no padding. |
| * |
| * \warning ECB mode does not protect the confidentiality of the encrypted data |
| * except in extremely narrow circumstances. It is recommended that applications |
| * only use ECB if they need to construct an operating mode that the |
| * implementation does not provide. Implementations are encouraged to provide |
| * the modes that applications need in preference to supporting direct access |
| * to ECB. |
| * |
| * The underlying block cipher is determined by the key type. |
| * |
| * This symmetric cipher mode can only be used with messages whose lengths are a |
| * multiple of the block size of the chosen block cipher. |
| * |
| * ECB mode does not accept an initialization vector (IV). When using a |
| * multi-part cipher operation with this algorithm, psa_cipher_generate_iv() |
| * and psa_cipher_set_iv() must not be called. |
| */ |
| #define PSA_ALG_ECB_NO_PADDING ((psa_algorithm_t)0x04404400) |
| |
| /** The CBC block cipher chaining mode, with no padding. |
| * |
| * The underlying block cipher is determined by the key type. |
| * |
| * This symmetric cipher mode can only be used with messages whose lengths |
| * are whole number of blocks for the chosen block cipher. |
| */ |
| #define PSA_ALG_CBC_NO_PADDING ((psa_algorithm_t)0x04404000) |
| |
| /** The CBC block cipher chaining mode with PKCS#7 padding. |
| * |
| * The underlying block cipher is determined by the key type. |
| * |
| * This is the padding method defined by PKCS#7 (RFC 2315) §10.3. |
| */ |
| #define PSA_ALG_CBC_PKCS7 ((psa_algorithm_t)0x04404100) |
| |
| #define PSA_ALG_AEAD_FROM_BLOCK_FLAG ((psa_algorithm_t)0x00400000) |
| |
| /** Whether the specified algorithm is an AEAD mode on a block cipher. |
| * |
| * \param alg An algorithm identifier (value of type #psa_algorithm_t). |
| * |
| * \return 1 if \p alg is an AEAD algorithm which is an AEAD mode based on |
| * a block cipher, 0 otherwise. |
| * This macro may return either 0 or 1 if \p alg is not a supported |
| * algorithm identifier. |
| */ |
| #define PSA_ALG_IS_AEAD_ON_BLOCK_CIPHER(alg) \ |
| (((alg) & (PSA_ALG_CATEGORY_MASK | PSA_ALG_AEAD_FROM_BLOCK_FLAG)) == \ |
| (PSA_ALG_CATEGORY_AEAD | PSA_ALG_AEAD_FROM_BLOCK_FLAG)) |
| |
| /** The CCM authenticated encryption algorithm. |
| * |
| * The underlying block cipher is determined by the key type. |
| */ |
| #define PSA_ALG_CCM ((psa_algorithm_t)0x05500100) |
| |
| /** The GCM authenticated encryption algorithm. |
| * |
| * The underlying block cipher is determined by the key type. |
| */ |
| #define PSA_ALG_GCM ((psa_algorithm_t)0x05500200) |
| |
| /** The Chacha20-Poly1305 AEAD algorithm. |
| * |
| * The ChaCha20_Poly1305 construction is defined in RFC 7539. |
| * |
| * Implementations must support 12-byte nonces, may support 8-byte nonces, |
| * and should reject other sizes. |
| * |
| * Implementations must support 16-byte tags and should reject other sizes. |
| */ |
| #define PSA_ALG_CHACHA20_POLY1305 ((psa_algorithm_t)0x05100500) |
| |
| /* In the encoding of a AEAD algorithm, the bits corresponding to |
| * PSA_ALG_AEAD_TAG_LENGTH_MASK encode the length of the AEAD tag. |
| * The constants for default lengths follow this encoding. |
| */ |
| #define PSA_ALG_AEAD_TAG_LENGTH_MASK ((psa_algorithm_t)0x003f0000) |
| #define PSA_AEAD_TAG_LENGTH_OFFSET 16 |
| |
| /** Macro to build a shortened AEAD algorithm. |
| * |
| * A shortened AEAD algorithm is similar to the corresponding AEAD |
| * algorithm, but has an authentication tag that consists of fewer bytes. |
| * Depending on the algorithm, the tag length may affect the calculation |
| * of the ciphertext. |
| * |
| * \param aead_alg An AEAD algorithm identifier (value of type |
| * #psa_algorithm_t such that #PSA_ALG_IS_AEAD(\p alg) |
| * is true). |
| * \param tag_length Desired length of the authentication tag in bytes. |
| * |
| * \return The corresponding AEAD algorithm with the specified |
| * length. |
| * \return Unspecified if \p alg is not a supported |
| * AEAD algorithm or if \p tag_length is not valid |
| * for the specified AEAD algorithm. |
| */ |
| #define PSA_ALG_AEAD_WITH_SHORTENED_TAG(aead_alg, tag_length) \ |
| (((aead_alg) & ~PSA_ALG_AEAD_TAG_LENGTH_MASK) | \ |
| ((tag_length) << PSA_AEAD_TAG_LENGTH_OFFSET & \ |
| PSA_ALG_AEAD_TAG_LENGTH_MASK)) |
| |
| /** Calculate the corresponding AEAD algorithm with the default tag length. |
| * |
| * \param aead_alg An AEAD algorithm (\c PSA_ALG_XXX value such that |
| * #PSA_ALG_IS_AEAD(\p alg) is true). |
| * |
| * \return The corresponding AEAD algorithm with the default |
| * tag length for that algorithm. |
| */ |
| #define PSA_ALG_AEAD_WITH_DEFAULT_LENGTH_TAG(aead_alg) \ |
| ( \ |
| PSA_ALG_AEAD_WITH_DEFAULT_LENGTH_TAG_CASE(aead_alg, PSA_ALG_CCM) \ |
| PSA_ALG_AEAD_WITH_DEFAULT_LENGTH_TAG_CASE(aead_alg, PSA_ALG_GCM) \ |
| PSA_ALG_AEAD_WITH_DEFAULT_LENGTH_TAG_CASE(aead_alg, PSA_ALG_CHACHA20_POLY1305) \ |
| 0) |
| #define PSA_ALG_AEAD_WITH_DEFAULT_LENGTH_TAG_CASE(aead_alg, ref) \ |
| PSA_ALG_AEAD_WITH_SHORTENED_TAG(aead_alg, 0) == \ |
| PSA_ALG_AEAD_WITH_SHORTENED_TAG(ref, 0) ? \ |
| ref : |
| |
| #define PSA_ALG_RSA_PKCS1V15_SIGN_BASE ((psa_algorithm_t)0x06000200) |
| /** RSA PKCS#1 v1.5 signature with hashing. |
| * |
| * This is the signature scheme defined by RFC 8017 |
| * (PKCS#1: RSA Cryptography Specifications) under the name |
| * RSASSA-PKCS1-v1_5. |
| * |
| * \param hash_alg A hash algorithm (\c PSA_ALG_XXX value such that |
| * #PSA_ALG_IS_HASH(\p hash_alg) is true). |
| * This includes #PSA_ALG_ANY_HASH |
| * when specifying the algorithm in a usage policy. |
| * |
| * \return The corresponding RSA PKCS#1 v1.5 signature algorithm. |
| * \return Unspecified if \p hash_alg is not a supported |
| * hash algorithm. |
| */ |
| #define PSA_ALG_RSA_PKCS1V15_SIGN(hash_alg) \ |
| (PSA_ALG_RSA_PKCS1V15_SIGN_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) |
| /** Raw PKCS#1 v1.5 signature. |
| * |
| * The input to this algorithm is the DigestInfo structure used by |
| * RFC 8017 (PKCS#1: RSA Cryptography Specifications), §9.2 |
| * steps 3–6. |
| */ |
| #define PSA_ALG_RSA_PKCS1V15_SIGN_RAW PSA_ALG_RSA_PKCS1V15_SIGN_BASE |
| #define PSA_ALG_IS_RSA_PKCS1V15_SIGN(alg) \ |
| (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_RSA_PKCS1V15_SIGN_BASE) |
| |
| #define PSA_ALG_RSA_PSS_BASE ((psa_algorithm_t)0x06000300) |
| /** RSA PSS signature with hashing. |
| * |
| * This is the signature scheme defined by RFC 8017 |
| * (PKCS#1: RSA Cryptography Specifications) under the name |
| * RSASSA-PSS, with the message generation function MGF1, and with |
| * a salt length equal to the length of the hash. The specified |
| * hash algorithm is used to hash the input message, to create the |
| * salted hash, and for the mask generation. |
| * |
| * \param hash_alg A hash algorithm (\c PSA_ALG_XXX value such that |
| * #PSA_ALG_IS_HASH(\p hash_alg) is true). |
| * This includes #PSA_ALG_ANY_HASH |
| * when specifying the algorithm in a usage policy. |
| * |
| * \return The corresponding RSA PSS signature algorithm. |
| * \return Unspecified if \p hash_alg is not a supported |
| * hash algorithm. |
| */ |
| #define PSA_ALG_RSA_PSS(hash_alg) \ |
| (PSA_ALG_RSA_PSS_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) |
| #define PSA_ALG_IS_RSA_PSS(alg) \ |
| (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_RSA_PSS_BASE) |
| |
| #define PSA_ALG_ECDSA_BASE ((psa_algorithm_t)0x06000600) |
| /** ECDSA signature with hashing. |
| * |
| * This is the ECDSA signature scheme defined by ANSI X9.62, |
| * with a random per-message secret number (*k*). |
| * |
| * The representation of the signature as a byte string consists of |
| * the concatentation of the signature values *r* and *s*. Each of |
| * *r* and *s* is encoded as an *N*-octet string, where *N* is the length |
| * of the base point of the curve in octets. Each value is represented |
| * in big-endian order (most significant octet first). |
| * |
| * \param hash_alg A hash algorithm (\c PSA_ALG_XXX value such that |
| * #PSA_ALG_IS_HASH(\p hash_alg) is true). |
| * This includes #PSA_ALG_ANY_HASH |
| * when specifying the algorithm in a usage policy. |
| * |
| * \return The corresponding ECDSA signature algorithm. |
| * \return Unspecified if \p hash_alg is not a supported |
| * hash algorithm. |
| */ |
| #define PSA_ALG_ECDSA(hash_alg) \ |
| (PSA_ALG_ECDSA_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) |
| /** ECDSA signature without hashing. |
| * |
| * This is the same signature scheme as #PSA_ALG_ECDSA(), but |
| * without specifying a hash algorithm. This algorithm may only be |
| * used to sign or verify a sequence of bytes that should be an |
| * already-calculated hash. Note that the input is padded with |
| * zeros on the left or truncated on the left as required to fit |
| * the curve size. |
| */ |
| #define PSA_ALG_ECDSA_ANY PSA_ALG_ECDSA_BASE |
| #define PSA_ALG_DETERMINISTIC_ECDSA_BASE ((psa_algorithm_t)0x06000700) |
| /** Deterministic ECDSA signature with hashing. |
| * |
| * This is the deterministic ECDSA signature scheme defined by RFC 6979. |
| * |
| * The representation of a signature is the same as with #PSA_ALG_ECDSA(). |
| * |
| * Note that when this algorithm is used for verification, signatures |
| * made with randomized ECDSA (#PSA_ALG_ECDSA(\p hash_alg)) with the |
| * same private key are accepted. In other words, |
| * #PSA_ALG_DETERMINISTIC_ECDSA(\p hash_alg) differs from |
| * #PSA_ALG_ECDSA(\p hash_alg) only for signature, not for verification. |
| * |
| * \param hash_alg A hash algorithm (\c PSA_ALG_XXX value such that |
| * #PSA_ALG_IS_HASH(\p hash_alg) is true). |
| * This includes #PSA_ALG_ANY_HASH |
| * when specifying the algorithm in a usage policy. |
| * |
| * \return The corresponding deterministic ECDSA signature |
| * algorithm. |
| * \return Unspecified if \p hash_alg is not a supported |
| * hash algorithm. |
| */ |
| #define PSA_ALG_DETERMINISTIC_ECDSA(hash_alg) \ |
| (PSA_ALG_DETERMINISTIC_ECDSA_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) |
| #define PSA_ALG_ECDSA_DETERMINISTIC_FLAG ((psa_algorithm_t)0x00000100) |
| #define PSA_ALG_IS_ECDSA(alg) \ |
| (((alg) & ~PSA_ALG_HASH_MASK & ~PSA_ALG_ECDSA_DETERMINISTIC_FLAG) == \ |
| PSA_ALG_ECDSA_BASE) |
| #define PSA_ALG_ECDSA_IS_DETERMINISTIC(alg) \ |
| (((alg) & PSA_ALG_ECDSA_DETERMINISTIC_FLAG) != 0) |
| #define PSA_ALG_IS_DETERMINISTIC_ECDSA(alg) \ |
| (PSA_ALG_IS_ECDSA(alg) && PSA_ALG_ECDSA_IS_DETERMINISTIC(alg)) |
| #define PSA_ALG_IS_RANDOMIZED_ECDSA(alg) \ |
| (PSA_ALG_IS_ECDSA(alg) && !PSA_ALG_ECDSA_IS_DETERMINISTIC(alg)) |
| |
| /** Whether the specified algorithm is a hash-and-sign algorithm. |
| * |
| * Hash-and-sign algorithms are asymmetric (public-key) signature algorithms |
| * structured in two parts: first the calculation of a hash in a way that |
| * does not depend on the key, then the calculation of a signature from the |
| * hash value and the key. |
| * |
| * \param alg An algorithm identifier (value of type #psa_algorithm_t). |
| * |
| * \return 1 if \p alg is a hash-and-sign algorithm, 0 otherwise. |
| * This macro may return either 0 or 1 if \p alg is not a supported |
| * algorithm identifier. |
| */ |
| #define PSA_ALG_IS_HASH_AND_SIGN(alg) \ |
| (PSA_ALG_IS_RSA_PSS(alg) || PSA_ALG_IS_RSA_PKCS1V15_SIGN(alg) || \ |
| PSA_ALG_IS_ECDSA(alg)) |
| |
| /** Get the hash used by a hash-and-sign signature algorithm. |
| * |
| * A hash-and-sign algorithm is a signature algorithm which is |
| * composed of two phases: first a hashing phase which does not use |
| * the key and produces a hash of the input message, then a signing |
| * phase which only uses the hash and the key and not the message |
| * itself. |
| * |
| * \param alg A signature algorithm (\c PSA_ALG_XXX value such that |
| * #PSA_ALG_IS_SIGN(\p alg) is true). |
| * |
| * \return The underlying hash algorithm if \p alg is a hash-and-sign |
| * algorithm. |
| * \return 0 if \p alg is a signature algorithm that does not |
| * follow the hash-and-sign structure. |
| * \return Unspecified if \p alg is not a signature algorithm or |
| * if it is not supported by the implementation. |
| */ |
| #define PSA_ALG_SIGN_GET_HASH(alg) \ |
| (PSA_ALG_IS_HASH_AND_SIGN(alg) ? \ |
| ((alg) & PSA_ALG_HASH_MASK) == 0 ? /*"raw" algorithm*/ 0 : \ |
| ((alg) & PSA_ALG_HASH_MASK) | PSA_ALG_CATEGORY_HASH : \ |
| 0) |
| |
| /** RSA PKCS#1 v1.5 encryption. |
| */ |
| #define PSA_ALG_RSA_PKCS1V15_CRYPT ((psa_algorithm_t)0x07000200) |
| |
| #define PSA_ALG_RSA_OAEP_BASE ((psa_algorithm_t)0x07000300) |
| /** RSA OAEP encryption. |
| * |
| * This is the encryption scheme defined by RFC 8017 |
| * (PKCS#1: RSA Cryptography Specifications) under the name |
| * RSAES-OAEP, with the message generation function MGF1. |
| * |
| * \param hash_alg The hash algorithm (\c PSA_ALG_XXX value such that |
| * #PSA_ALG_IS_HASH(\p hash_alg) is true) to use |
| * for MGF1. |
| * |
| * \return The corresponding RSA OAEP encryption algorithm. |
| * \return Unspecified if \p hash_alg is not a supported |
| * hash algorithm. |
| */ |
| #define PSA_ALG_RSA_OAEP(hash_alg) \ |
| (PSA_ALG_RSA_OAEP_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) |
| #define PSA_ALG_IS_RSA_OAEP(alg) \ |
| (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_RSA_OAEP_BASE) |
| #define PSA_ALG_RSA_OAEP_GET_HASH(alg) \ |
| (PSA_ALG_IS_RSA_OAEP(alg) ? \ |
| ((alg) & PSA_ALG_HASH_MASK) | PSA_ALG_CATEGORY_HASH : \ |
| 0) |
| |
| #define PSA_ALG_HKDF_BASE ((psa_algorithm_t)0x08000100) |
| /** Macro to build an HKDF algorithm. |
| * |
| * For example, `PSA_ALG_HKDF(PSA_ALG_SHA256)` is HKDF using HMAC-SHA-256. |
| * |
| * This key derivation algorithm uses the following inputs: |
| * - #PSA_KEY_DERIVATION_INPUT_SALT is the salt used in the "extract" step. |
| * It is optional; if omitted, the derivation uses an empty salt. |
| * - #PSA_KEY_DERIVATION_INPUT_SECRET is the secret key used in the "extract" step. |
| * - #PSA_KEY_DERIVATION_INPUT_INFO is the info string used in the "expand" step. |
| * You must pass #PSA_KEY_DERIVATION_INPUT_SALT before #PSA_KEY_DERIVATION_INPUT_SECRET. |
| * You may pass #PSA_KEY_DERIVATION_INPUT_INFO at any time after steup and before |
| * starting to generate output. |
| * |
| * \param hash_alg A hash algorithm (\c PSA_ALG_XXX value such that |
| * #PSA_ALG_IS_HASH(\p hash_alg) is true). |
| * |
| * \return The corresponding HKDF algorithm. |
| * \return Unspecified if \p hash_alg is not a supported |
| * hash algorithm. |
| */ |
| #define PSA_ALG_HKDF(hash_alg) \ |
| (PSA_ALG_HKDF_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) |
| /** Whether the specified algorithm is an HKDF algorithm. |
| * |
| * HKDF is a family of key derivation algorithms that are based on a hash |
| * function and the HMAC construction. |
| * |
| * \param alg An algorithm identifier (value of type #psa_algorithm_t). |
| * |
| * \return 1 if \c alg is an HKDF algorithm, 0 otherwise. |
| * This macro may return either 0 or 1 if \c alg is not a supported |
| * key derivation algorithm identifier. |
| */ |
| #define PSA_ALG_IS_HKDF(alg) \ |
| (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_HKDF_BASE) |
| #define PSA_ALG_HKDF_GET_HASH(hkdf_alg) \ |
| (PSA_ALG_CATEGORY_HASH | ((hkdf_alg) & PSA_ALG_HASH_MASK)) |
| |
| #define PSA_ALG_TLS12_PRF_BASE ((psa_algorithm_t)0x08000200) |
| /** Macro to build a TLS-1.2 PRF algorithm. |
| * |
| * TLS 1.2 uses a custom pseudorandom function (PRF) for key schedule, |
| * specified in Section 5 of RFC 5246. It is based on HMAC and can be |
| * used with either SHA-256 or SHA-384. |
| * |
| * This key derivation algorithm uses the following inputs, which must be |
| * passed in the order given here: |
| * - #PSA_KEY_DERIVATION_INPUT_SEED is the seed. |
| * - #PSA_KEY_DERIVATION_INPUT_SECRET is the secret key. |
| * - #PSA_KEY_DERIVATION_INPUT_LABEL is the label. |
| * |
| * For the application to TLS-1.2 key expansion, the seed is the |
| * concatenation of ServerHello.Random + ClientHello.Random, |
| * and the label is "key expansion". |
| * |
| * For example, `PSA_ALG_TLS12_PRF(PSA_ALG_SHA256)` represents the |
| * TLS 1.2 PRF using HMAC-SHA-256. |
| * |
| * \param hash_alg A hash algorithm (\c PSA_ALG_XXX value such that |
| * #PSA_ALG_IS_HASH(\p hash_alg) is true). |
| * |
| * \return The corresponding TLS-1.2 PRF algorithm. |
| * \return Unspecified if \p hash_alg is not a supported |
| * hash algorithm. |
| */ |
| #define PSA_ALG_TLS12_PRF(hash_alg) \ |
| (PSA_ALG_TLS12_PRF_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) |
| |
| /** Whether the specified algorithm is a TLS-1.2 PRF algorithm. |
| * |
| * \param alg An algorithm identifier (value of type #psa_algorithm_t). |
| * |
| * \return 1 if \c alg is a TLS-1.2 PRF algorithm, 0 otherwise. |
| * This macro may return either 0 or 1 if \c alg is not a supported |
| * key derivation algorithm identifier. |
| */ |
| #define PSA_ALG_IS_TLS12_PRF(alg) \ |
| (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_TLS12_PRF_BASE) |
| #define PSA_ALG_TLS12_PRF_GET_HASH(hkdf_alg) \ |
| (PSA_ALG_CATEGORY_HASH | ((hkdf_alg) & PSA_ALG_HASH_MASK)) |
| |
| #define PSA_ALG_TLS12_PSK_TO_MS_BASE ((psa_algorithm_t)0x08000300) |
| /** Macro to build a TLS-1.2 PSK-to-MasterSecret algorithm. |
| * |
| * In a pure-PSK handshake in TLS 1.2, the master secret is derived |
| * from the PreSharedKey (PSK) through the application of padding |
| * (RFC 4279, Section 2) and the TLS-1.2 PRF (RFC 5246, Section 5). |
| * The latter is based on HMAC and can be used with either SHA-256 |
| * or SHA-384. |
| * |
| * This key derivation algorithm uses the following inputs, which must be |
| * passed in the order given here: |
| * - #PSA_KEY_DERIVATION_INPUT_SEED is the seed. |
| * - #PSA_KEY_DERIVATION_INPUT_SECRET is the secret key. |
| * - #PSA_KEY_DERIVATION_INPUT_LABEL is the label. |
| * |
| * For the application to TLS-1.2, the seed (which is |
| * forwarded to the TLS-1.2 PRF) is the concatenation of the |
| * ClientHello.Random + ServerHello.Random, |
| * and the label is "master secret" or "extended master secret". |
| * |
| * For example, `PSA_ALG_TLS12_PSK_TO_MS(PSA_ALG_SHA256)` represents the |
| * TLS-1.2 PSK to MasterSecret derivation PRF using HMAC-SHA-256. |
| * |
| * \param hash_alg A hash algorithm (\c PSA_ALG_XXX value such that |
| * #PSA_ALG_IS_HASH(\p hash_alg) is true). |
| * |
| * \return The corresponding TLS-1.2 PSK to MS algorithm. |
| * \return Unspecified if \p hash_alg is not a supported |
| * hash algorithm. |
| */ |
| #define PSA_ALG_TLS12_PSK_TO_MS(hash_alg) \ |
| (PSA_ALG_TLS12_PSK_TO_MS_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) |
| |
| /** Whether the specified algorithm is a TLS-1.2 PSK to MS algorithm. |
| * |
| * \param alg An algorithm identifier (value of type #psa_algorithm_t). |
| * |
| * \return 1 if \c alg is a TLS-1.2 PSK to MS algorithm, 0 otherwise. |
| * This macro may return either 0 or 1 if \c alg is not a supported |
| * key derivation algorithm identifier. |
| */ |
| #define PSA_ALG_IS_TLS12_PSK_TO_MS(alg) \ |
| (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_TLS12_PSK_TO_MS_BASE) |
| #define PSA_ALG_TLS12_PSK_TO_MS_GET_HASH(hkdf_alg) \ |
| (PSA_ALG_CATEGORY_HASH | ((hkdf_alg) & PSA_ALG_HASH_MASK)) |
| |
| #define PSA_ALG_KEY_DERIVATION_MASK ((psa_algorithm_t)0xfe00ffff) |
| #define PSA_ALG_KEY_AGREEMENT_MASK ((psa_algorithm_t)0xffff0000) |
| |
| /** Macro to build a combined algorithm that chains a key agreement with |
| * a key derivation. |
| * |
| * \param ka_alg A key agreement algorithm (\c PSA_ALG_XXX value such |
| * that #PSA_ALG_IS_KEY_AGREEMENT(\p ka_alg) is true). |
| * \param kdf_alg A key derivation algorithm (\c PSA_ALG_XXX value such |
| * that #PSA_ALG_IS_KEY_DERIVATION(\p kdf_alg) is true). |
| * |
| * \return The corresponding key agreement and derivation |
| * algorithm. |
| * \return Unspecified if \p ka_alg is not a supported |
| * key agreement algorithm or \p kdf_alg is not a |
| * supported key derivation algorithm. |
| */ |
| #define PSA_ALG_KEY_AGREEMENT(ka_alg, kdf_alg) \ |
| ((ka_alg) | (kdf_alg)) |
| |
| #define PSA_ALG_KEY_AGREEMENT_GET_KDF(alg) \ |
| (((alg) & PSA_ALG_KEY_DERIVATION_MASK) | PSA_ALG_CATEGORY_KEY_DERIVATION) |
| |
| #define PSA_ALG_KEY_AGREEMENT_GET_BASE(alg) \ |
| (((alg) & PSA_ALG_KEY_AGREEMENT_MASK) | PSA_ALG_CATEGORY_KEY_AGREEMENT) |
| |
| /** Whether the specified algorithm is a raw key agreement algorithm. |
| * |
| * A raw key agreement algorithm is one that does not specify |
| * a key derivation function. |
| * Usually, raw key agreement algorithms are constructed directly with |
| * a \c PSA_ALG_xxx macro while non-raw key agreement algorithms are |
| * constructed with #PSA_ALG_KEY_AGREEMENT(). |
| * |
| * \param alg An algorithm identifier (value of type #psa_algorithm_t). |
| * |
| * \return 1 if \p alg is a raw key agreement algorithm, 0 otherwise. |
| * This macro may return either 0 or 1 if \p alg is not a supported |
| * algorithm identifier. |
| */ |
| #define PSA_ALG_IS_RAW_KEY_AGREEMENT(alg) \ |
| (PSA_ALG_IS_KEY_AGREEMENT(alg) && \ |
| PSA_ALG_KEY_AGREEMENT_GET_KDF(alg) == PSA_ALG_CATEGORY_KEY_DERIVATION) |
| |
| #define PSA_ALG_IS_KEY_DERIVATION_OR_AGREEMENT(alg) \ |
| ((PSA_ALG_IS_KEY_DERIVATION(alg) || PSA_ALG_IS_KEY_AGREEMENT(alg))) |
| |
| /** The finite-field Diffie-Hellman (DH) key agreement algorithm. |
| * |
| * The shared secret produced by key agreement is |
| * `g^{ab}` in big-endian format. |
| * It is `ceiling(m / 8)` bytes long where `m` is the size of the prime `p` |
| * in bits. |
| */ |
| #define PSA_ALG_FFDH ((psa_algorithm_t)0x09010000) |
| |
| /** Whether the specified algorithm is a finite field Diffie-Hellman algorithm. |
| * |
| * This includes the raw finite field Diffie-Hellman algorithm as well as |
| * finite-field Diffie-Hellman followed by any supporter key derivation |
| * algorithm. |
| * |
| * \param alg An algorithm identifier (value of type #psa_algorithm_t). |
| * |
| * \return 1 if \c alg is a finite field Diffie-Hellman algorithm, 0 otherwise. |
| * This macro may return either 0 or 1 if \c alg is not a supported |
| * key agreement algorithm identifier. |
| */ |
| #define PSA_ALG_IS_FFDH(alg) \ |
| (PSA_ALG_KEY_AGREEMENT_GET_BASE(alg) == PSA_ALG_FFDH) |
| |
| /** The elliptic curve Diffie-Hellman (ECDH) key agreement algorithm. |
| * |
| * The shared secret produced by key agreement is the x-coordinate of |
| * the shared secret point. It is always `ceiling(m / 8)` bytes long where |
| * `m` is the bit size associated with the curve, i.e. the bit size of the |
| * order of the curve's coordinate field. When `m` is not a multiple of 8, |
| * the byte containing the most significant bit of the shared secret |
| * is padded with zero bits. The byte order is either little-endian |
| * or big-endian depending on the curve type. |
| * |
| * - For Montgomery curves (curve types `PSA_ECC_FAMILY_CURVEXXX`), |
| * the shared secret is the x-coordinate of `d_A Q_B = d_B Q_A` |
| * in little-endian byte order. |
| * The bit size is 448 for Curve448 and 255 for Curve25519. |
| * - For Weierstrass curves over prime fields (curve types |
| * `PSA_ECC_FAMILY_SECPXXX` and `PSA_ECC_FAMILY_BRAINPOOL_PXXX`), |
| * the shared secret is the x-coordinate of `d_A Q_B = d_B Q_A` |
| * in big-endian byte order. |
| * The bit size is `m = ceiling(log_2(p))` for the field `F_p`. |
| * - For Weierstrass curves over binary fields (curve types |
| * `PSA_ECC_FAMILY_SECTXXX`), |
| * the shared secret is the x-coordinate of `d_A Q_B = d_B Q_A` |
| * in big-endian byte order. |
| * The bit size is `m` for the field `F_{2^m}`. |
| */ |
| #define PSA_ALG_ECDH ((psa_algorithm_t)0x09020000) |
| |
| /** Whether the specified algorithm is an elliptic curve Diffie-Hellman |
| * algorithm. |
| * |
| * This includes the raw elliptic curve Diffie-Hellman algorithm as well as |
| * elliptic curve Diffie-Hellman followed by any supporter key derivation |
| * algorithm. |
| * |
| * \param alg An algorithm identifier (value of type #psa_algorithm_t). |
| * |
| * \return 1 if \c alg is an elliptic curve Diffie-Hellman algorithm, |
| * 0 otherwise. |
| * This macro may return either 0 or 1 if \c alg is not a supported |
| * key agreement algorithm identifier. |
| */ |
| #define PSA_ALG_IS_ECDH(alg) \ |
| (PSA_ALG_KEY_AGREEMENT_GET_BASE(alg) == PSA_ALG_ECDH) |
| |
| /** Whether the specified algorithm encoding is a wildcard. |
| * |
| * Wildcard values may only be used to set the usage algorithm field in |
| * a policy, not to perform an operation. |
| * |
| * \param alg An algorithm identifier (value of type #psa_algorithm_t). |
| * |
| * \return 1 if \c alg is a wildcard algorithm encoding. |
| * \return 0 if \c alg is a non-wildcard algorithm encoding (suitable for |
| * an operation). |
| * \return This macro may return either 0 or 1 if \c alg is not a supported |
| * algorithm identifier. |
| */ |
| #define PSA_ALG_IS_WILDCARD(alg) \ |
| (PSA_ALG_IS_HASH_AND_SIGN(alg) ? \ |
| PSA_ALG_SIGN_GET_HASH(alg) == PSA_ALG_ANY_HASH : \ |
| (alg) == PSA_ALG_ANY_HASH) |
| |
| /**@}*/ |
| |
| /** \defgroup key_lifetimes Key lifetimes |
| * @{ |
| */ |
| |
| /** The default lifetime for volatile keys. |
| * |
| * A volatile key only exists as long as the identifier to it is not destroyed. |
| * The key material is guaranteed to be erased on a power reset. |
| * |
| * A key with this lifetime is typically stored in the RAM area of the |
| * PSA Crypto subsystem. However this is an implementation choice. |
| * If an implementation stores data about the key in a non-volatile memory, |
| * it must release all the resources associated with the key and erase the |
| * key material if the calling application terminates. |
| */ |
| #define PSA_KEY_LIFETIME_VOLATILE ((psa_key_lifetime_t)0x00000000) |
| |
| /** The default lifetime for persistent keys. |
| * |
| * A persistent key remains in storage until it is explicitly destroyed or |
| * until the corresponding storage area is wiped. This specification does |
| * not define any mechanism to wipe a storage area, but integrations may |
| * provide their own mechanism (for example to perform a factory reset, |
| * to prepare for device refurbishment, or to uninstall an application). |
| * |
| * This lifetime value is the default storage area for the calling |
| * application. Integrations of Mbed TLS may support other persistent lifetimes. |
| * See ::psa_key_lifetime_t for more information. |
| */ |
| #define PSA_KEY_LIFETIME_PERSISTENT ((psa_key_lifetime_t)0x00000001) |
| |
| /** The persistence level of volatile keys. |
| * |
| * See ::psa_key_persistence_t for more information. |
| */ |
| #define PSA_KEY_PERSISTENCE_VOLATILE ((psa_key_persistence_t)0x00) |
| |
| /** The default persistence level for persistent keys. |
| * |
| * See ::psa_key_persistence_t for more information. |
| */ |
| #define PSA_KEY_PERSISTENCE_DEFAULT ((psa_key_persistence_t)0x01) |
| |
| /** A persistence level indicating that a key is never destroyed. |
| * |
| * See ::psa_key_persistence_t for more information. |
| */ |
| #define PSA_KEY_PERSISTENCE_READ_ONLY ((psa_key_persistence_t)0xff) |
| |
| #define PSA_KEY_LIFETIME_GET_PERSISTENCE(lifetime) \ |
| ((psa_key_persistence_t)((lifetime) & 0x000000ff)) |
| |
| #define PSA_KEY_LIFETIME_GET_LOCATION(lifetime) \ |
| ((psa_key_location_t)((lifetime) >> 8)) |
| |
| /** Whether a key lifetime indicates that the key is volatile. |
| * |
| * A volatile key is automatically destroyed by the implementation when |
| * the application instance terminates. In particular, a volatile key |
| * is automatically destroyed on a power reset of the device. |
| * |
| * A key that is not volatile is persistent. Persistent keys are |
| * preserved until the application explicitly destroys them or until an |
| * implementation-specific device management event occurs (for example, |
| * a factory reset). |
| * |
| * \param lifetime The lifetime value to query (value of type |
| * ::psa_key_lifetime_t). |
| * |
| * \return \c 1 if the key is volatile, otherwise \c 0. |
| */ |
| #define PSA_KEY_LIFETIME_IS_VOLATILE(lifetime) \ |
| (PSA_KEY_LIFETIME_GET_PERSISTENCE(lifetime) == \ |
| PSA_KEY_PERSISTENCE_VOLATILE) |
| |
| /** Construct a lifetime from a persistence level and a location. |
| * |
| * \param persistence The persistence level |
| * (value of type ::psa_key_persistence_t). |
| * \param location The location indicator |
| * (value of type ::psa_key_location_t). |
| * |
| * \return The constructed lifetime value. |
| */ |
| #define PSA_KEY_LIFETIME_FROM_PERSISTENCE_AND_LOCATION(persistence, location) \ |
| ((location) << 8 | (persistence)) |
| |
| /** The local storage area for persistent keys. |
| * |
| * This storage area is available on all systems that can store persistent |
| * keys without delegating the storage to a third-party cryptoprocessor. |
| * |
| * See ::psa_key_location_t for more information. |
| */ |
| #define PSA_KEY_LOCATION_LOCAL_STORAGE ((psa_key_location_t)0x000000) |
| |
| #define PSA_KEY_LOCATION_VENDOR_FLAG ((psa_key_location_t)0x800000) |
| |
| /** The minimum value for a key identifier chosen by the application. |
| */ |
| #define PSA_KEY_ID_USER_MIN ((psa_key_id_t)0x00000001) |
| /** The maximum value for a key identifier chosen by the application. |
| */ |
| #define PSA_KEY_ID_USER_MAX ((psa_key_id_t)0x3fffffff) |
| /** The minimum value for a key identifier chosen by the implementation. |
| */ |
| #define PSA_KEY_ID_VENDOR_MIN ((psa_key_id_t)0x40000000) |
| /** The maximum value for a key identifier chosen by the implementation. |
| */ |
| #define PSA_KEY_ID_VENDOR_MAX ((psa_key_id_t)0x7fffffff) |
| |
| |
| #if !defined(MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER) |
| |
| #define MBEDTLS_SVC_KEY_ID_INIT ( (psa_key_id_t)0 ) |
| #define MBEDTLS_SVC_KEY_ID_GET_KEY_ID( id ) ( id ) |
| #define MBEDTLS_SVC_KEY_ID_GET_OWNER_ID( id ) ( 0 ) |
| |
| /** Utility to initialize a key identifier at runtime. |
| * |
| * \param unused Unused parameter. |
| * \param key_id Identifier of the key. |
| */ |
| static inline mbedtls_svc_key_id_t mbedtls_svc_key_id_make( |
| unsigned int unused, psa_key_id_t key_id ) |
| { |
| (void)unused; |
| |
| return( key_id ); |
| } |
| |
| /** Compare two key identifiers. |
| * |
| * \param id1 First key identifier. |
| * \param id2 Second key identifier. |
| * |
| * \return Non-zero if the two key identifier are equal, zero otherwise. |
| */ |
| static inline int mbedtls_svc_key_id_equal( mbedtls_svc_key_id_t id1, |
| mbedtls_svc_key_id_t id2 ) |
| { |
| return( id1 == id2 ); |
| } |
| |
| /** Check whether a key identifier is null. |
| * |
| * \param key Key identifier. |
| * |
| * \return Non-zero if the key identifier is null, zero otherwise. |
| */ |
| static inline int mbedtls_svc_key_id_is_null( mbedtls_svc_key_id_t key ) |
| { |
| return( key == 0 ); |
| } |
| |
| #else /* MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER */ |
| |
| #define MBEDTLS_SVC_KEY_ID_INIT ( (mbedtls_svc_key_id_t){ 0, 0 } ) |
| #define MBEDTLS_SVC_KEY_ID_GET_KEY_ID( id ) ( ( id ).key_id ) |
| #define MBEDTLS_SVC_KEY_ID_GET_OWNER_ID( id ) ( ( id ).owner ) |
| |
| /** Utility to initialize a key identifier at runtime. |
| * |
| * \param owner_id Identifier of the key owner. |
| * \param key_id Identifier of the key. |
| */ |
| static inline mbedtls_svc_key_id_t mbedtls_svc_key_id_make( |
| mbedtls_key_owner_id_t owner_id, psa_key_id_t key_id ) |
| { |
| return( (mbedtls_svc_key_id_t){ .key_id = key_id, |
| .owner = owner_id } ); |
| } |
| |
| /** Compare two key identifiers. |
| * |
| * \param id1 First key identifier. |
| * \param id2 Second key identifier. |
| * |
| * \return Non-zero if the two key identifier are equal, zero otherwise. |
| */ |
| static inline int mbedtls_svc_key_id_equal( mbedtls_svc_key_id_t id1, |
| mbedtls_svc_key_id_t id2 ) |
| { |
| return( ( id1.key_id == id2.key_id ) && |
| mbedtls_key_owner_id_equal( id1.owner, id2.owner ) ); |
| } |
| |
| /** Check whether a key identifier is null. |
| * |
| * \param key Key identifier. |
| * |
| * \return Non-zero if the key identifier is null, zero otherwise. |
| */ |
| static inline int mbedtls_svc_key_id_is_null( mbedtls_svc_key_id_t key ) |
| { |
| return( ( key.key_id == 0 ) && ( key.owner == 0 ) ); |
| } |
| |
| #endif /* !MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER */ |
| |
| /**@}*/ |
| |
| /** \defgroup policy Key policies |
| * @{ |
| */ |
| |
| /** Whether the key may be exported. |
| * |
| * A public key or the public part of a key pair may always be exported |
| * regardless of the value of this permission flag. |
| * |
| * If a key does not have export permission, implementations shall not |
| * allow the key to be exported in plain form from the cryptoprocessor, |
| * whether through psa_export_key() or through a proprietary interface. |
| * The key may however be exportable in a wrapped form, i.e. in a form |
| * where it is encrypted by another key. |
| */ |
| #define PSA_KEY_USAGE_EXPORT ((psa_key_usage_t)0x00000001) |
| |
| /** Whether the key may be copied. |
| * |
| * This flag allows the use of psa_copy_key() to make a copy of the key |
| * with the same policy or a more restrictive policy. |
| * |
| * For lifetimes for which the key is located in a secure element which |
| * enforce the non-exportability of keys, copying a key outside the secure |
| * element also requires the usage flag #PSA_KEY_USAGE_EXPORT. |
| * Copying the key inside the secure element is permitted with just |
| * #PSA_KEY_USAGE_COPY if the secure element supports it. |
| * For keys with the lifetime #PSA_KEY_LIFETIME_VOLATILE or |
| * #PSA_KEY_LIFETIME_PERSISTENT, the usage flag #PSA_KEY_USAGE_COPY |
| * is sufficient to permit the copy. |
| */ |
| #define PSA_KEY_USAGE_COPY ((psa_key_usage_t)0x00000002) |
| |
| /** Whether the key may be used to encrypt a message. |
| * |
| * This flag allows the key to be used for a symmetric encryption operation, |
| * for an AEAD encryption-and-authentication operation, |
| * or for an asymmetric encryption operation, |
| * if otherwise permitted by the key's type and policy. |
| * |
| * For a key pair, this concerns the public key. |
| */ |
| #define PSA_KEY_USAGE_ENCRYPT ((psa_key_usage_t)0x00000100) |
| |
| /** Whether the key may be used to decrypt a message. |
| * |
| * This flag allows the key to be used for a symmetric decryption operation, |
| * for an AEAD decryption-and-verification operation, |
| * or for an asymmetric decryption operation, |
| * if otherwise permitted by the key's type and policy. |
| * |
| * For a key pair, this concerns the private key. |
| */ |
| #define PSA_KEY_USAGE_DECRYPT ((psa_key_usage_t)0x00000200) |
| |
| /** Whether the key may be used to sign a message. |
| * |
| * This flag allows the key to be used for a MAC calculation operation |
| * or for an asymmetric signature operation, |
| * if otherwise permitted by the key's type and policy. |
| * |
| * For a key pair, this concerns the private key. |
| */ |
| #define PSA_KEY_USAGE_SIGN_HASH ((psa_key_usage_t)0x00001000) |
| |
| /** Whether the key may be used to verify a message signature. |
| * |
| * This flag allows the key to be used for a MAC verification operation |
| * or for an asymmetric signature verification operation, |
| * if otherwise permitted by by the key's type and policy. |
| * |
| * For a key pair, this concerns the public key. |
| */ |
| #define PSA_KEY_USAGE_VERIFY_HASH ((psa_key_usage_t)0x00002000) |
| |
| /** Whether the key may be used to derive other keys. |
| */ |
| #define PSA_KEY_USAGE_DERIVE ((psa_key_usage_t)0x00004000) |
| |
| /**@}*/ |
| |
| /** \defgroup derivation Key derivation |
| * @{ |
| */ |
| |
| /** A secret input for key derivation. |
| * |
| * This should be a key of type #PSA_KEY_TYPE_DERIVE |
| * (passed to psa_key_derivation_input_key()) |
| * or the shared secret resulting from a key agreement |
| * (obtained via psa_key_derivation_key_agreement()). |
| * |
| * The secret can also be a direct input (passed to |
| * key_derivation_input_bytes()). In this case, the derivation operation |
| * may not be used to derive keys: the operation will only allow |
| * psa_key_derivation_output_bytes(), not psa_key_derivation_output_key(). |
| */ |
| #define PSA_KEY_DERIVATION_INPUT_SECRET ((psa_key_derivation_step_t)0x0101) |
| |
| /** A label for key derivation. |
| * |
| * This should be a direct input. |
| * It can also be a key of type #PSA_KEY_TYPE_RAW_DATA. |
| */ |
| #define PSA_KEY_DERIVATION_INPUT_LABEL ((psa_key_derivation_step_t)0x0201) |
| |
| /** A salt for key derivation. |
| * |
| * This should be a direct input. |
| * It can also be a key of type #PSA_KEY_TYPE_RAW_DATA. |
| */ |
| #define PSA_KEY_DERIVATION_INPUT_SALT ((psa_key_derivation_step_t)0x0202) |
| |
| /** An information string for key derivation. |
| * |
| * This should be a direct input. |
| * It can also be a key of type #PSA_KEY_TYPE_RAW_DATA. |
| */ |
| #define PSA_KEY_DERIVATION_INPUT_INFO ((psa_key_derivation_step_t)0x0203) |
| |
| /** A seed for key derivation. |
| * |
| * This should be a direct input. |
| * It can also be a key of type #PSA_KEY_TYPE_RAW_DATA. |
| */ |
| #define PSA_KEY_DERIVATION_INPUT_SEED ((psa_key_derivation_step_t)0x0204) |
| |
| /**@}*/ |
| |
| #endif /* PSA_CRYPTO_VALUES_H */ |