blob: fcd73f2c01d11365e336b9c84c0de387661ee015 [file] [log] [blame]
#!/bin/sh
# ssl-opt.sh
#
# Copyright The Mbed TLS Contributors
# SPDX-License-Identifier: Apache-2.0
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# Purpose
#
# Executes tests to prove various TLS/SSL options and extensions.
#
# The goal is not to cover every ciphersuite/version, but instead to cover
# specific options (max fragment length, truncated hmac, etc) or procedures
# (session resumption from cache or ticket, renego, etc).
#
# The tests assume a build with default options, with exceptions expressed
# with a dependency. The tests focus on functionality and do not consider
# performance.
#
set -u
# Limit the size of each log to 10 GiB, in case of failures with this script
# where it may output seemingly unlimited length error logs.
ulimit -f 20971520
ORIGINAL_PWD=$PWD
if ! cd "$(dirname "$0")"; then
exit 125
fi
# default values, can be overridden by the environment
: ${P_SRV:=../programs/ssl/ssl_server2}
: ${P_CLI:=../programs/ssl/ssl_client2}
: ${P_PXY:=../programs/test/udp_proxy}
: ${OPENSSL_CMD:=openssl} # OPENSSL would conflict with the build system
: ${GNUTLS_CLI:=gnutls-cli}
: ${GNUTLS_SERV:=gnutls-serv}
: ${PERL:=perl}
guess_config_name() {
if git diff --quiet ../include/mbedtls/config.h 2>/dev/null; then
echo "default"
else
echo "unknown"
fi
}
: ${MBEDTLS_TEST_OUTCOME_FILE=}
: ${MBEDTLS_TEST_CONFIGURATION:="$(guess_config_name)"}
: ${MBEDTLS_TEST_PLATFORM:="$(uname -s | tr -c \\n0-9A-Za-z _)-$(uname -m | tr -c \\n0-9A-Za-z _)"}
O_SRV="$OPENSSL_CMD s_server -www -cert data_files/server5.crt -key data_files/server5.key"
O_CLI="echo 'GET / HTTP/1.0' | $OPENSSL_CMD s_client"
G_SRV="$GNUTLS_SERV --x509certfile data_files/server5.crt --x509keyfile data_files/server5.key"
G_CLI="echo 'GET / HTTP/1.0' | $GNUTLS_CLI --x509cafile data_files/test-ca_cat12.crt"
TCP_CLIENT="$PERL scripts/tcp_client.pl"
# alternative versions of OpenSSL and GnuTLS (no default path)
if [ -n "${OPENSSL_LEGACY:-}" ]; then
O_LEGACY_SRV="$OPENSSL_LEGACY s_server -www -cert data_files/server5.crt -key data_files/server5.key"
O_LEGACY_CLI="echo 'GET / HTTP/1.0' | $OPENSSL_LEGACY s_client"
else
O_LEGACY_SRV=false
O_LEGACY_CLI=false
fi
if [ -n "${GNUTLS_NEXT_SERV:-}" ]; then
G_NEXT_SRV="$GNUTLS_NEXT_SERV --x509certfile data_files/server5.crt --x509keyfile data_files/server5.key"
else
G_NEXT_SRV=false
fi
if [ -n "${GNUTLS_NEXT_CLI:-}" ]; then
G_NEXT_CLI="echo 'GET / HTTP/1.0' | $GNUTLS_NEXT_CLI --x509cafile data_files/test-ca_cat12.crt"
else
G_NEXT_CLI=false
fi
TESTS=0
FAILS=0
SKIPS=0
CONFIG_H='../include/mbedtls/config.h'
MEMCHECK=0
FILTER='.*'
EXCLUDE='^$'
SHOW_TEST_NUMBER=0
RUN_TEST_NUMBER=''
PRESERVE_LOGS=0
# Pick a "unique" server port in the range 10000-19999, and a proxy
# port which is this plus 10000. Each port number may be independently
# overridden by a command line option.
SRV_PORT=$(($$ % 10000 + 10000))
PXY_PORT=$((SRV_PORT + 10000))
print_usage() {
echo "Usage: $0 [options]"
printf " -h|--help\tPrint this help.\n"
printf " -m|--memcheck\tCheck memory leaks and errors.\n"
printf " -f|--filter\tOnly matching tests are executed (BRE)\n"
printf " -e|--exclude\tMatching tests are excluded (BRE)\n"
printf " -n|--number\tExecute only numbered test (comma-separated, e.g. '245,256')\n"
printf " -s|--show-numbers\tShow test numbers in front of test names\n"
printf " -p|--preserve-logs\tPreserve logs of successful tests as well\n"
printf " --outcome-file\tFile where test outcomes are written\n"
printf " \t(default: \$MBEDTLS_TEST_OUTCOME_FILE, none if empty)\n"
printf " --port \tTCP/UDP port (default: randomish 1xxxx)\n"
printf " --proxy-port\tTCP/UDP proxy port (default: randomish 2xxxx)\n"
printf " --seed \tInteger seed value to use for this test run\n"
}
get_options() {
while [ $# -gt 0 ]; do
case "$1" in
-f|--filter)
shift; FILTER=$1
;;
-e|--exclude)
shift; EXCLUDE=$1
;;
-m|--memcheck)
MEMCHECK=1
;;
-n|--number)
shift; RUN_TEST_NUMBER=$1
;;
-s|--show-numbers)
SHOW_TEST_NUMBER=1
;;
-p|--preserve-logs)
PRESERVE_LOGS=1
;;
--port)
shift; SRV_PORT=$1
;;
--proxy-port)
shift; PXY_PORT=$1
;;
--seed)
shift; SEED="$1"
;;
-h|--help)
print_usage
exit 0
;;
*)
echo "Unknown argument: '$1'"
print_usage
exit 1
;;
esac
shift
done
}
# Make the outcome file path relative to the original directory, not
# to .../tests
case "$MBEDTLS_TEST_OUTCOME_FILE" in
[!/]*)
MBEDTLS_TEST_OUTCOME_FILE="$ORIGINAL_PWD/$MBEDTLS_TEST_OUTCOME_FILE"
;;
esac
# Skip next test; use this macro to skip tests which are legitimate
# in theory and expected to be re-introduced at some point, but
# aren't expected to succeed at the moment due to problems outside
# our control (such as bugs in other TLS implementations).
skip_next_test() {
SKIP_NEXT="YES"
}
# skip next test if the flag is not enabled in config.h
requires_config_enabled() {
if grep "^#define $1" $CONFIG_H > /dev/null; then :; else
SKIP_NEXT="YES"
fi
}
# skip next test if the flag is enabled in config.h
requires_config_disabled() {
if grep "^#define $1" $CONFIG_H > /dev/null; then
SKIP_NEXT="YES"
fi
}
get_config_value_or_default() {
# This function uses the query_config command line option to query the
# required Mbed TLS compile time configuration from the ssl_server2
# program. The command will always return a success value if the
# configuration is defined and the value will be printed to stdout.
#
# Note that if the configuration is not defined or is defined to nothing,
# the output of this function will be an empty string.
${P_SRV} "query_config=${1}"
}
requires_config_value_at_least() {
VAL="$( get_config_value_or_default "$1" )"
if [ -z "$VAL" ]; then
# Should never happen
echo "Mbed TLS configuration $1 is not defined"
exit 1
elif [ "$VAL" -lt "$2" ]; then
SKIP_NEXT="YES"
fi
}
requires_config_value_at_most() {
VAL=$( get_config_value_or_default "$1" )
if [ -z "$VAL" ]; then
# Should never happen
echo "Mbed TLS configuration $1 is not defined"
exit 1
elif [ "$VAL" -gt "$2" ]; then
SKIP_NEXT="YES"
fi
}
requires_ciphersuite_enabled() {
if [ -z "$($P_CLI --help 2>/dev/null | grep $1)" ]; then
SKIP_NEXT="YES"
fi
}
# maybe_requires_ciphersuite_enabled CMD [RUN_TEST_OPTION...]
# If CMD (call to a TLS client or server program) requires a specific
# ciphersuite, arrange to only run the test case if this ciphersuite is
# enabled. As an exception, do run the test case if it expects a ciphersuite
# mismatch.
maybe_requires_ciphersuite_enabled() {
case "$1" in
*\ force_ciphersuite=*) :;;
*) return;; # No specific required ciphersuite
esac
ciphersuite="${1##*\ force_ciphersuite=}"
ciphersuite="${ciphersuite%%[!-0-9A-Z_a-z]*}"
shift
case "$*" in
*"-s SSL - The server has no ciphersuites in common"*)
# This test case expects a ciphersuite mismatch, so it doesn't
# require the ciphersuite to be enabled.
;;
*)
requires_ciphersuite_enabled "$ciphersuite"
;;
esac
unset ciphersuite
}
# skip next test if OpenSSL doesn't support FALLBACK_SCSV
requires_openssl_with_fallback_scsv() {
if [ -z "${OPENSSL_HAS_FBSCSV:-}" ]; then
if $OPENSSL_CMD s_client -help 2>&1 | grep fallback_scsv >/dev/null
then
OPENSSL_HAS_FBSCSV="YES"
else
OPENSSL_HAS_FBSCSV="NO"
fi
fi
if [ "$OPENSSL_HAS_FBSCSV" = "NO" ]; then
SKIP_NEXT="YES"
fi
}
# skip next test if GnuTLS isn't available
requires_gnutls() {
if [ -z "${GNUTLS_AVAILABLE:-}" ]; then
if ( which "$GNUTLS_CLI" && which "$GNUTLS_SERV" ) >/dev/null 2>&1; then
GNUTLS_AVAILABLE="YES"
else
GNUTLS_AVAILABLE="NO"
fi
fi
if [ "$GNUTLS_AVAILABLE" = "NO" ]; then
SKIP_NEXT="YES"
fi
}
# skip next test if GnuTLS-next isn't available
requires_gnutls_next() {
if [ -z "${GNUTLS_NEXT_AVAILABLE:-}" ]; then
if ( which "${GNUTLS_NEXT_CLI:-}" && which "${GNUTLS_NEXT_SERV:-}" ) >/dev/null 2>&1; then
GNUTLS_NEXT_AVAILABLE="YES"
else
GNUTLS_NEXT_AVAILABLE="NO"
fi
fi
if [ "$GNUTLS_NEXT_AVAILABLE" = "NO" ]; then
SKIP_NEXT="YES"
fi
}
# skip next test if OpenSSL-legacy isn't available
requires_openssl_legacy() {
if [ -z "${OPENSSL_LEGACY_AVAILABLE:-}" ]; then
if which "${OPENSSL_LEGACY:-}" >/dev/null 2>&1; then
OPENSSL_LEGACY_AVAILABLE="YES"
else
OPENSSL_LEGACY_AVAILABLE="NO"
fi
fi
if [ "$OPENSSL_LEGACY_AVAILABLE" = "NO" ]; then
SKIP_NEXT="YES"
fi
}
# skip next test if IPv6 isn't available on this host
requires_ipv6() {
if [ -z "${HAS_IPV6:-}" ]; then
$P_SRV server_addr='::1' > $SRV_OUT 2>&1 &
SRV_PID=$!
sleep 1
kill $SRV_PID >/dev/null 2>&1
if grep "NET - Binding of the socket failed" $SRV_OUT >/dev/null; then
HAS_IPV6="NO"
else
HAS_IPV6="YES"
fi
rm -r $SRV_OUT
fi
if [ "$HAS_IPV6" = "NO" ]; then
SKIP_NEXT="YES"
fi
}
# skip next test if it's i686 or uname is not available
requires_not_i686() {
if [ -z "${IS_I686:-}" ]; then
IS_I686="YES"
if which "uname" >/dev/null 2>&1; then
if [ -z "$(uname -a | grep i686)" ]; then
IS_I686="NO"
fi
fi
fi
if [ "$IS_I686" = "YES" ]; then
SKIP_NEXT="YES"
fi
}
# Calculate the input & output maximum content lengths set in the config
MAX_CONTENT_LEN=$( ../scripts/config.py get MBEDTLS_SSL_MAX_CONTENT_LEN || echo "16384")
MAX_IN_LEN=$( ../scripts/config.py get MBEDTLS_SSL_IN_CONTENT_LEN || echo "$MAX_CONTENT_LEN")
MAX_OUT_LEN=$( ../scripts/config.py get MBEDTLS_SSL_OUT_CONTENT_LEN || echo "$MAX_CONTENT_LEN")
if [ "$MAX_IN_LEN" -lt "$MAX_CONTENT_LEN" ]; then
MAX_CONTENT_LEN="$MAX_IN_LEN"
fi
if [ "$MAX_OUT_LEN" -lt "$MAX_CONTENT_LEN" ]; then
MAX_CONTENT_LEN="$MAX_OUT_LEN"
fi
# skip the next test if the SSL output buffer is less than 16KB
requires_full_size_output_buffer() {
if [ "$MAX_OUT_LEN" -ne 16384 ]; then
SKIP_NEXT="YES"
fi
}
# skip the next test if valgrind is in use
not_with_valgrind() {
if [ "$MEMCHECK" -gt 0 ]; then
SKIP_NEXT="YES"
fi
}
# skip the next test if valgrind is NOT in use
only_with_valgrind() {
if [ "$MEMCHECK" -eq 0 ]; then
SKIP_NEXT="YES"
fi
}
# multiply the client timeout delay by the given factor for the next test
client_needs_more_time() {
CLI_DELAY_FACTOR=$1
}
# wait for the given seconds after the client finished in the next test
server_needs_more_time() {
SRV_DELAY_SECONDS=$1
}
# print_name <name>
print_name() {
TESTS=$(( $TESTS + 1 ))
LINE=""
if [ "$SHOW_TEST_NUMBER" -gt 0 ]; then
LINE="$TESTS "
fi
LINE="$LINE$1"
printf "%s " "$LINE"
LEN=$(( 72 - `echo "$LINE" | wc -c` ))
for i in `seq 1 $LEN`; do printf '.'; done
printf ' '
}
# record_outcome <outcome> [<failure-reason>]
# The test name must be in $NAME.
record_outcome() {
echo "$1"
if [ -n "$MBEDTLS_TEST_OUTCOME_FILE" ]; then
printf '%s;%s;%s;%s;%s;%s\n' \
"$MBEDTLS_TEST_PLATFORM" "$MBEDTLS_TEST_CONFIGURATION" \
"ssl-opt" "$NAME" \
"$1" "${2-}" \
>>"$MBEDTLS_TEST_OUTCOME_FILE"
fi
}
# fail <message>
fail() {
record_outcome "FAIL" "$1"
echo " ! $1"
mv $SRV_OUT o-srv-${TESTS}.log
mv $CLI_OUT o-cli-${TESTS}.log
if [ -n "$PXY_CMD" ]; then
mv $PXY_OUT o-pxy-${TESTS}.log
fi
echo " ! outputs saved to o-XXX-${TESTS}.log"
if [ "${LOG_FAILURE_ON_STDOUT:-0}" != 0 ]; then
echo " ! server output:"
cat o-srv-${TESTS}.log
echo " ! ========================================================"
echo " ! client output:"
cat o-cli-${TESTS}.log
if [ -n "$PXY_CMD" ]; then
echo " ! ========================================================"
echo " ! proxy output:"
cat o-pxy-${TESTS}.log
fi
echo ""
fi
FAILS=$(( $FAILS + 1 ))
}
# is_polar <cmd_line>
is_polar() {
echo "$1" | grep 'ssl_server2\|ssl_client2' > /dev/null
}
# openssl s_server doesn't have -www with DTLS
check_osrv_dtls() {
if echo "$SRV_CMD" | grep 's_server.*-dtls' >/dev/null; then
NEEDS_INPUT=1
SRV_CMD="$( echo $SRV_CMD | sed s/-www// )"
else
NEEDS_INPUT=0
fi
}
# provide input to commands that need it
provide_input() {
if [ $NEEDS_INPUT -eq 0 ]; then
return
fi
while true; do
echo "HTTP/1.0 200 OK"
sleep 1
done
}
# has_mem_err <log_file_name>
has_mem_err() {
if ( grep -F 'All heap blocks were freed -- no leaks are possible' "$1" &&
grep -F 'ERROR SUMMARY: 0 errors from 0 contexts' "$1" ) > /dev/null
then
return 1 # false: does not have errors
else
return 0 # true: has errors
fi
}
# Wait for process $2 named $3 to be listening on port $1. Print error to $4.
if type lsof >/dev/null 2>/dev/null; then
wait_app_start() {
START_TIME=$(date +%s)
if [ "$DTLS" -eq 1 ]; then
proto=UDP
else
proto=TCP
fi
# Make a tight loop, server normally takes less than 1s to start.
while ! lsof -a -n -b -i "$proto:$1" -p "$2" >/dev/null 2>/dev/null; do
if [ $(( $(date +%s) - $START_TIME )) -gt $DOG_DELAY ]; then
echo "$3 START TIMEOUT"
echo "$3 START TIMEOUT" >> $4
break
fi
# Linux and *BSD support decimal arguments to sleep. On other
# OSes this may be a tight loop.
sleep 0.1 2>/dev/null || true
done
}
else
echo "Warning: lsof not available, wait_app_start = sleep"
wait_app_start() {
sleep "$START_DELAY"
}
fi
# Wait for server process $2 to be listening on port $1.
wait_server_start() {
wait_app_start $1 $2 "SERVER" $SRV_OUT
}
# Wait for proxy process $2 to be listening on port $1.
wait_proxy_start() {
wait_app_start $1 $2 "PROXY" $PXY_OUT
}
# Given the client or server debug output, parse the unix timestamp that is
# included in the first 4 bytes of the random bytes and check that it's within
# acceptable bounds
check_server_hello_time() {
# Extract the time from the debug (lvl 3) output of the client
SERVER_HELLO_TIME="$(sed -n 's/.*server hello, current time: //p' < "$1")"
# Get the Unix timestamp for now
CUR_TIME=$(date +'%s')
THRESHOLD_IN_SECS=300
# Check if the ServerHello time was printed
if [ -z "$SERVER_HELLO_TIME" ]; then
return 1
fi
# Check the time in ServerHello is within acceptable bounds
if [ $SERVER_HELLO_TIME -lt $(( $CUR_TIME - $THRESHOLD_IN_SECS )) ]; then
# The time in ServerHello is at least 5 minutes before now
return 1
elif [ $SERVER_HELLO_TIME -gt $(( $CUR_TIME + $THRESHOLD_IN_SECS )) ]; then
# The time in ServerHello is at least 5 minutes later than now
return 1
else
return 0
fi
}
# Get handshake memory usage from server or client output and put it into the variable specified by the first argument
handshake_memory_get() {
OUTPUT_VARIABLE="$1"
OUTPUT_FILE="$2"
# Get memory usage from a pattern like "Heap memory usage after handshake: 23112 bytes. Peak memory usage was 33112"
MEM_USAGE=$(sed -n 's/.*Heap memory usage after handshake: //p' < "$OUTPUT_FILE" | grep -o "[0-9]*" | head -1)
# Check if memory usage was read
if [ -z "$MEM_USAGE" ]; then
echo "Error: Can not read the value of handshake memory usage"
return 1
else
eval "$OUTPUT_VARIABLE=$MEM_USAGE"
return 0
fi
}
# Get handshake memory usage from server or client output and check if this value
# is not higher than the maximum given by the first argument
handshake_memory_check() {
MAX_MEMORY="$1"
OUTPUT_FILE="$2"
# Get memory usage
if ! handshake_memory_get "MEMORY_USAGE" "$OUTPUT_FILE"; then
return 1
fi
# Check if memory usage is below max value
if [ "$MEMORY_USAGE" -gt "$MAX_MEMORY" ]; then
echo "\nFailed: Handshake memory usage was $MEMORY_USAGE bytes," \
"but should be below $MAX_MEMORY bytes"
return 1
else
return 0
fi
}
# wait for client to terminate and set CLI_EXIT
# must be called right after starting the client
wait_client_done() {
CLI_PID=$!
CLI_DELAY=$(( $DOG_DELAY * $CLI_DELAY_FACTOR ))
CLI_DELAY_FACTOR=1
( sleep $CLI_DELAY; echo "===CLIENT_TIMEOUT===" >> $CLI_OUT; kill $CLI_PID ) &
DOG_PID=$!
wait $CLI_PID
CLI_EXIT=$?
kill $DOG_PID >/dev/null 2>&1
wait $DOG_PID
echo "EXIT: $CLI_EXIT" >> $CLI_OUT
sleep $SRV_DELAY_SECONDS
SRV_DELAY_SECONDS=0
}
# check if the given command uses dtls and sets global variable DTLS
detect_dtls() {
if echo "$1" | grep 'dtls=1\|-dtls1\|-u' >/dev/null; then
DTLS=1
else
DTLS=0
fi
}
# Compare file content
# Usage: find_in_both pattern file1 file2
# extract from file1 the first line matching the pattern
# check in file2 that the same line can be found
find_in_both() {
srv_pattern=$(grep -m 1 "$1" "$2");
if [ -z "$srv_pattern" ]; then
return 1;
fi
if grep "$srv_pattern" $3 >/dev/null; then :
return 0;
else
return 1;
fi
}
# Usage: run_test name [-p proxy_cmd] srv_cmd cli_cmd cli_exit [option [...]]
# Options: -s pattern pattern that must be present in server output
# -c pattern pattern that must be present in client output
# -u pattern lines after pattern must be unique in client output
# -f call shell function on client output
# -S pattern pattern that must be absent in server output
# -C pattern pattern that must be absent in client output
# -U pattern lines after pattern must be unique in server output
# -F call shell function on server output
# -g call shell function on server and client output
run_test() {
NAME="$1"
shift 1
if echo "$NAME" | grep "$FILTER" | grep -v "$EXCLUDE" >/dev/null; then :
else
SKIP_NEXT="NO"
# There was no request to run the test, so don't record its outcome.
return
fi
print_name "$NAME"
# Do we only run numbered tests?
if [ "X$RUN_TEST_NUMBER" = "X" ]; then :
elif echo ",$RUN_TEST_NUMBER," | grep ",$TESTS," >/dev/null; then :
else
SKIP_NEXT="YES"
fi
# does this test use a proxy?
if [ "X$1" = "X-p" ]; then
PXY_CMD="$2"
shift 2
else
PXY_CMD=""
fi
# get commands and client output
SRV_CMD="$1"
CLI_CMD="$2"
CLI_EXPECT="$3"
shift 3
# Check if test uses files
TEST_USES_FILES=$(echo "$SRV_CMD $CLI_CMD" | grep "\.\(key\|crt\|pem\)" )
if [ ! -z "$TEST_USES_FILES" ]; then
requires_config_enabled MBEDTLS_FS_IO
fi
# If the client or serve requires a ciphersuite, check that it's enabled.
maybe_requires_ciphersuite_enabled "$SRV_CMD" "$@"
maybe_requires_ciphersuite_enabled "$CLI_CMD" "$@"
# should we skip?
if [ "X$SKIP_NEXT" = "XYES" ]; then
SKIP_NEXT="NO"
record_outcome "SKIP"
SKIPS=$(( $SKIPS + 1 ))
return
fi
# update DTLS variable
detect_dtls "$SRV_CMD"
# if the test uses DTLS but no custom proxy, add a simple proxy
# as it provides timing info that's useful to debug failures
if [ -z "$PXY_CMD" ] && [ "$DTLS" -eq 1 ]; then
PXY_CMD="$P_PXY"
case " $SRV_CMD " in
*' server_addr=::1 '*)
PXY_CMD="$PXY_CMD server_addr=::1 listen_addr=::1";;
esac
fi
# fix client port
if [ -n "$PXY_CMD" ]; then
CLI_CMD=$( echo "$CLI_CMD" | sed s/+SRV_PORT/$PXY_PORT/g )
else
CLI_CMD=$( echo "$CLI_CMD" | sed s/+SRV_PORT/$SRV_PORT/g )
fi
# prepend valgrind to our commands if active
if [ "$MEMCHECK" -gt 0 ]; then
if is_polar "$SRV_CMD"; then
SRV_CMD="valgrind --leak-check=full $SRV_CMD"
fi
if is_polar "$CLI_CMD"; then
CLI_CMD="valgrind --leak-check=full $CLI_CMD"
fi
fi
TIMES_LEFT=2
while [ $TIMES_LEFT -gt 0 ]; do
TIMES_LEFT=$(( $TIMES_LEFT - 1 ))
# run the commands
if [ -n "$PXY_CMD" ]; then
printf "# %s\n%s\n" "$NAME" "$PXY_CMD" > $PXY_OUT
$PXY_CMD >> $PXY_OUT 2>&1 &
PXY_PID=$!
wait_proxy_start "$PXY_PORT" "$PXY_PID"
fi
check_osrv_dtls
printf '# %s\n%s\n' "$NAME" "$SRV_CMD" > $SRV_OUT
provide_input | $SRV_CMD >> $SRV_OUT 2>&1 &
SRV_PID=$!
wait_server_start "$SRV_PORT" "$SRV_PID"
printf '# %s\n%s\n' "$NAME" "$CLI_CMD" > $CLI_OUT
eval "$CLI_CMD" >> $CLI_OUT 2>&1 &
wait_client_done
sleep 0.05
# terminate the server (and the proxy)
kill $SRV_PID
wait $SRV_PID
if [ -n "$PXY_CMD" ]; then
kill $PXY_PID >/dev/null 2>&1
wait $PXY_PID
fi
# retry only on timeouts
if grep '===CLIENT_TIMEOUT===' $CLI_OUT >/dev/null; then
printf "RETRY "
else
TIMES_LEFT=0
fi
done
# check if the client and server went at least to the handshake stage
# (useful to avoid tests with only negative assertions and non-zero
# expected client exit to incorrectly succeed in case of catastrophic
# failure)
if is_polar "$SRV_CMD"; then
if grep "Performing the SSL/TLS handshake" $SRV_OUT >/dev/null; then :;
else
fail "server or client failed to reach handshake stage"
return
fi
fi
if is_polar "$CLI_CMD"; then
if grep "Performing the SSL/TLS handshake" $CLI_OUT >/dev/null; then :;
else
fail "server or client failed to reach handshake stage"
return
fi
fi
# check server exit code
if [ $? != 0 ]; then
fail "server fail"
return
fi
# check client exit code
if [ \( "$CLI_EXPECT" = 0 -a "$CLI_EXIT" != 0 \) -o \
\( "$CLI_EXPECT" != 0 -a "$CLI_EXIT" = 0 \) ]
then
fail "bad client exit code (expected $CLI_EXPECT, got $CLI_EXIT)"
return
fi
# check other assertions
# lines beginning with == are added by valgrind, ignore them
# lines with 'Serious error when reading debug info', are valgrind issues as well
while [ $# -gt 0 ]
do
case $1 in
"-s")
if grep -v '^==' $SRV_OUT | grep -v 'Serious error when reading debug info' | grep "$2" >/dev/null; then :; else
fail "pattern '$2' MUST be present in the Server output"
return
fi
;;
"-c")
if grep -v '^==' $CLI_OUT | grep -v 'Serious error when reading debug info' | grep "$2" >/dev/null; then :; else
fail "pattern '$2' MUST be present in the Client output"
return
fi
;;
"-S")
if grep -v '^==' $SRV_OUT | grep -v 'Serious error when reading debug info' | grep "$2" >/dev/null; then
fail "pattern '$2' MUST NOT be present in the Server output"
return
fi
;;
"-C")
if grep -v '^==' $CLI_OUT | grep -v 'Serious error when reading debug info' | grep "$2" >/dev/null; then
fail "pattern '$2' MUST NOT be present in the Client output"
return
fi
;;
# The filtering in the following two options (-u and -U) do the following
# - ignore valgrind output
# - filter out everything but lines right after the pattern occurrences
# - keep one of each non-unique line
# - count how many lines remain
# A line with '--' will remain in the result from previous outputs, so the number of lines in the result will be 1
# if there were no duplicates.
"-U")
if [ $(grep -v '^==' $SRV_OUT | grep -v 'Serious error when reading debug info' | grep -A1 "$2" | grep -v "$2" | sort | uniq -d | wc -l) -gt 1 ]; then
fail "lines following pattern '$2' must be unique in Server output"
return
fi
;;
"-u")
if [ $(grep -v '^==' $CLI_OUT | grep -v 'Serious error when reading debug info' | grep -A1 "$2" | grep -v "$2" | sort | uniq -d | wc -l) -gt 1 ]; then
fail "lines following pattern '$2' must be unique in Client output"
return
fi
;;
"-F")
if ! $2 "$SRV_OUT"; then
fail "function call to '$2' failed on Server output"
return
fi
;;
"-f")
if ! $2 "$CLI_OUT"; then
fail "function call to '$2' failed on Client output"
return
fi
;;
"-g")
if ! eval "$2 '$SRV_OUT' '$CLI_OUT'"; then
fail "function call to '$2' failed on Server and Client output"
return
fi
;;
*)
echo "Unknown test: $1" >&2
exit 1
esac
shift 2
done
# check valgrind's results
if [ "$MEMCHECK" -gt 0 ]; then
if is_polar "$SRV_CMD" && has_mem_err $SRV_OUT; then
fail "Server has memory errors"
return
fi
if is_polar "$CLI_CMD" && has_mem_err $CLI_OUT; then
fail "Client has memory errors"
return
fi
fi
# if we're here, everything is ok
record_outcome "PASS"
if [ "$PRESERVE_LOGS" -gt 0 ]; then
mv $SRV_OUT o-srv-${TESTS}.log
mv $CLI_OUT o-cli-${TESTS}.log
if [ -n "$PXY_CMD" ]; then
mv $PXY_OUT o-pxy-${TESTS}.log
fi
fi
rm -f $SRV_OUT $CLI_OUT $PXY_OUT
}
run_test_psa() {
requires_config_enabled MBEDTLS_USE_PSA_CRYPTO
run_test "PSA-supported ciphersuite: $1" \
"$P_SRV debug_level=3 force_version=tls1_2" \
"$P_CLI debug_level=3 force_version=tls1_2 force_ciphersuite=$1" \
0 \
-c "Successfully setup PSA-based decryption cipher context" \
-c "Successfully setup PSA-based encryption cipher context" \
-c "PSA calc verify" \
-c "calc PSA finished" \
-s "Successfully setup PSA-based decryption cipher context" \
-s "Successfully setup PSA-based encryption cipher context" \
-s "PSA calc verify" \
-s "calc PSA finished" \
-C "Failed to setup PSA-based cipher context"\
-S "Failed to setup PSA-based cipher context"\
-s "Protocol is TLSv1.2" \
-c "Perform PSA-based ECDH computation."\
-c "Perform PSA-based computation of digest of ServerKeyExchange" \
-S "error" \
-C "error"
}
run_test_psa_force_curve() {
requires_config_enabled MBEDTLS_USE_PSA_CRYPTO
run_test "PSA - ECDH with $1" \
"$P_SRV debug_level=4 force_version=tls1_2" \
"$P_CLI debug_level=4 force_version=tls1_2 force_ciphersuite=TLS-ECDHE-RSA-WITH-AES-128-GCM-SHA256 curves=$1" \
0 \
-c "Successfully setup PSA-based decryption cipher context" \
-c "Successfully setup PSA-based encryption cipher context" \
-c "PSA calc verify" \
-c "calc PSA finished" \
-s "Successfully setup PSA-based decryption cipher context" \
-s "Successfully setup PSA-based encryption cipher context" \
-s "PSA calc verify" \
-s "calc PSA finished" \
-C "Failed to setup PSA-based cipher context"\
-S "Failed to setup PSA-based cipher context"\
-s "Protocol is TLSv1.2" \
-c "Perform PSA-based ECDH computation."\
-c "Perform PSA-based computation of digest of ServerKeyExchange" \
-S "error" \
-C "error"
}
# Test that the server's memory usage after a handshake is reduced when a client specifies
# a maximum fragment length.
# first argument ($1) is MFL for SSL client
# second argument ($2) is memory usage for SSL client with default MFL (16k)
run_test_memory_after_hanshake_with_mfl()
{
# The test passes if the difference is around 2*(16k-MFL)
local MEMORY_USAGE_LIMIT="$(( $2 - ( 2 * ( 16384 - $1 )) ))"
# Leave some margin for robustness
MEMORY_USAGE_LIMIT="$(( ( MEMORY_USAGE_LIMIT * 110 ) / 100 ))"
run_test "Handshake memory usage (MFL $1)" \
"$P_SRV debug_level=3 auth_mode=required force_version=tls1_2" \
"$P_CLI debug_level=3 force_version=tls1_2 \
crt_file=data_files/server5.crt key_file=data_files/server5.key \
force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-CCM max_frag_len=$1" \
0 \
-F "handshake_memory_check $MEMORY_USAGE_LIMIT"
}
# Test that the server's memory usage after a handshake is reduced when a client specifies
# different values of Maximum Fragment Length: default (16k), 4k, 2k, 1k and 512 bytes
run_tests_memory_after_hanshake()
{
# all tests in this sequence requires the same configuration (see requires_config_enabled())
SKIP_THIS_TESTS="$SKIP_NEXT"
# first test with default MFU is to get reference memory usage
MEMORY_USAGE_MFL_16K=0
run_test "Handshake memory usage initial (MFL 16384 - default)" \
"$P_SRV debug_level=3 auth_mode=required force_version=tls1_2" \
"$P_CLI debug_level=3 force_version=tls1_2 \
crt_file=data_files/server5.crt key_file=data_files/server5.key \
force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-CCM" \
0 \
-F "handshake_memory_get MEMORY_USAGE_MFL_16K"
SKIP_NEXT="$SKIP_THIS_TESTS"
run_test_memory_after_hanshake_with_mfl 4096 "$MEMORY_USAGE_MFL_16K"
SKIP_NEXT="$SKIP_THIS_TESTS"
run_test_memory_after_hanshake_with_mfl 2048 "$MEMORY_USAGE_MFL_16K"
SKIP_NEXT="$SKIP_THIS_TESTS"
run_test_memory_after_hanshake_with_mfl 1024 "$MEMORY_USAGE_MFL_16K"
SKIP_NEXT="$SKIP_THIS_TESTS"
run_test_memory_after_hanshake_with_mfl 512 "$MEMORY_USAGE_MFL_16K"
}
cleanup() {
rm -f $CLI_OUT $SRV_OUT $PXY_OUT $SESSION
rm -f context_srv.txt
rm -f context_cli.txt
test -n "${SRV_PID:-}" && kill $SRV_PID >/dev/null 2>&1
test -n "${PXY_PID:-}" && kill $PXY_PID >/dev/null 2>&1
test -n "${CLI_PID:-}" && kill $CLI_PID >/dev/null 2>&1
test -n "${DOG_PID:-}" && kill $DOG_PID >/dev/null 2>&1
exit 1
}
#
# MAIN
#
get_options "$@"
# sanity checks, avoid an avalanche of errors
P_SRV_BIN="${P_SRV%%[ ]*}"
P_CLI_BIN="${P_CLI%%[ ]*}"
P_PXY_BIN="${P_PXY%%[ ]*}"
if [ ! -x "$P_SRV_BIN" ]; then
echo "Command '$P_SRV_BIN' is not an executable file"
exit 1
fi
if [ ! -x "$P_CLI_BIN" ]; then
echo "Command '$P_CLI_BIN' is not an executable file"
exit 1
fi
if [ ! -x "$P_PXY_BIN" ]; then
echo "Command '$P_PXY_BIN' is not an executable file"
exit 1
fi
if [ "$MEMCHECK" -gt 0 ]; then
if which valgrind >/dev/null 2>&1; then :; else
echo "Memcheck not possible. Valgrind not found"
exit 1
fi
fi
if which $OPENSSL_CMD >/dev/null 2>&1; then :; else
echo "Command '$OPENSSL_CMD' not found"
exit 1
fi
# used by watchdog
MAIN_PID="$$"
# We use somewhat arbitrary delays for tests:
# - how long do we wait for the server to start (when lsof not available)?
# - how long do we allow for the client to finish?
# (not to check performance, just to avoid waiting indefinitely)
# Things are slower with valgrind, so give extra time here.
#
# Note: without lsof, there is a trade-off between the running time of this
# script and the risk of spurious errors because we didn't wait long enough.
# The watchdog delay on the other hand doesn't affect normal running time of
# the script, only the case where a client or server gets stuck.
if [ "$MEMCHECK" -gt 0 ]; then
START_DELAY=6
DOG_DELAY=60
else
START_DELAY=2
DOG_DELAY=20
fi
# some particular tests need more time:
# - for the client, we multiply the usual watchdog limit by a factor
# - for the server, we sleep for a number of seconds after the client exits
# see client_need_more_time() and server_needs_more_time()
CLI_DELAY_FACTOR=1
SRV_DELAY_SECONDS=0
# fix commands to use this port, force IPv4 while at it
# +SRV_PORT will be replaced by either $SRV_PORT or $PXY_PORT later
P_SRV="$P_SRV server_addr=127.0.0.1 server_port=$SRV_PORT"
P_CLI="$P_CLI server_addr=127.0.0.1 server_port=+SRV_PORT"
P_PXY="$P_PXY server_addr=127.0.0.1 server_port=$SRV_PORT listen_addr=127.0.0.1 listen_port=$PXY_PORT ${SEED:+"seed=$SEED"}"
O_SRV="$O_SRV -accept $SRV_PORT -dhparam data_files/dhparams.pem"
O_CLI="$O_CLI -connect localhost:+SRV_PORT"
G_SRV="$G_SRV -p $SRV_PORT"
G_CLI="$G_CLI -p +SRV_PORT"
if [ -n "${OPENSSL_LEGACY:-}" ]; then
O_LEGACY_SRV="$O_LEGACY_SRV -accept $SRV_PORT -dhparam data_files/dhparams.pem"
O_LEGACY_CLI="$O_LEGACY_CLI -connect localhost:+SRV_PORT"
fi
if [ -n "${GNUTLS_NEXT_SERV:-}" ]; then
G_NEXT_SRV="$G_NEXT_SRV -p $SRV_PORT"
fi
if [ -n "${GNUTLS_NEXT_CLI:-}" ]; then
G_NEXT_CLI="$G_NEXT_CLI -p +SRV_PORT"
fi
# Allow SHA-1, because many of our test certificates use it
P_SRV="$P_SRV allow_sha1=1"
P_CLI="$P_CLI allow_sha1=1"
# Also pick a unique name for intermediate files
SRV_OUT="srv_out.$$"
CLI_OUT="cli_out.$$"
PXY_OUT="pxy_out.$$"
SESSION="session.$$"
SKIP_NEXT="NO"
trap cleanup INT TERM HUP
# Basic test
# Checks that:
# - things work with all ciphersuites active (used with config-full in all.sh)
# - the expected (highest security) parameters are selected
# ("signature_algorithm ext: 6" means SHA-512 (highest common hash))
run_test "Default" \
"$P_SRV debug_level=3" \
"$P_CLI" \
0 \
-s "Protocol is TLSv1.2" \
-s "Ciphersuite is TLS-ECDHE-RSA-WITH-CHACHA20-POLY1305-SHA256" \
-s "client hello v3, signature_algorithm ext: 6" \
-s "ECDHE curve: secp521r1" \
-S "error" \
-C "error"
run_test "Default, DTLS" \
"$P_SRV dtls=1" \
"$P_CLI dtls=1" \
0 \
-s "Protocol is DTLSv1.2" \
-s "Ciphersuite is TLS-ECDHE-RSA-WITH-CHACHA20-POLY1305-SHA256"
run_test "TLS client auth: required" \
"$P_SRV auth_mode=required" \
"$P_CLI" \
0 \
-s "Verifying peer X.509 certificate... ok"
requires_config_enabled MBEDTLS_X509_CRT_PARSE_C
requires_config_enabled MBEDTLS_ECDSA_C
requires_config_enabled MBEDTLS_SHA256_C
run_test "TLS: password protected client key" \
"$P_SRV auth_mode=required" \
"$P_CLI crt_file=data_files/server5.crt key_file=data_files/server5.key.enc key_pwd=PolarSSLTest" \
0
requires_config_enabled MBEDTLS_X509_CRT_PARSE_C
requires_config_enabled MBEDTLS_ECDSA_C
requires_config_enabled MBEDTLS_SHA256_C
run_test "TLS: password protected server key" \
"$P_SRV crt_file=data_files/server5.crt key_file=data_files/server5.key.enc key_pwd=PolarSSLTest" \
"$P_CLI" \
0
requires_config_enabled MBEDTLS_X509_CRT_PARSE_C
requires_config_enabled MBEDTLS_ECDSA_C
requires_config_enabled MBEDTLS_RSA_C
requires_config_enabled MBEDTLS_SHA256_C
run_test "TLS: password protected server key, two certificates" \
"$P_SRV \
key_file=data_files/server5.key.enc key_pwd=PolarSSLTest crt_file=data_files/server5.crt \
key_file2=data_files/server2.key.enc key_pwd2=PolarSSLTest crt_file2=data_files/server2.crt" \
"$P_CLI" \
0
requires_config_enabled MBEDTLS_ZLIB_SUPPORT
run_test "Default (compression enabled)" \
"$P_SRV debug_level=3" \
"$P_CLI debug_level=3" \
0 \
-s "Allocating compression buffer" \
-c "Allocating compression buffer" \
-s "Record expansion is unknown (compression)" \
-c "Record expansion is unknown (compression)" \
-S "error" \
-C "error"
requires_config_enabled MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
run_test "CA callback on client" \
"$P_SRV debug_level=3" \
"$P_CLI ca_callback=1 debug_level=3 " \
0 \
-c "use CA callback for X.509 CRT verification" \
-S "error" \
-C "error"
requires_config_enabled MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
requires_config_enabled MBEDTLS_X509_CRT_PARSE_C
requires_config_enabled MBEDTLS_ECDSA_C
requires_config_enabled MBEDTLS_SHA256_C
run_test "CA callback on server" \
"$P_SRV auth_mode=required" \
"$P_CLI ca_callback=1 debug_level=3 crt_file=data_files/server5.crt \
key_file=data_files/server5.key" \
0 \
-c "use CA callback for X.509 CRT verification" \
-s "Verifying peer X.509 certificate... ok" \
-S "error" \
-C "error"
# Test using an opaque private key for client authentication
requires_config_enabled MBEDTLS_USE_PSA_CRYPTO
requires_config_enabled MBEDTLS_X509_CRT_PARSE_C
requires_config_enabled MBEDTLS_ECDSA_C
requires_config_enabled MBEDTLS_SHA256_C
run_test "Opaque key for client authentication" \
"$P_SRV auth_mode=required" \
"$P_CLI key_opaque=1 crt_file=data_files/server5.crt \
key_file=data_files/server5.key" \
0 \
-c "key type: Opaque" \
-s "Verifying peer X.509 certificate... ok" \
-S "error" \
-C "error"
# Test ciphersuites which we expect to be fully supported by PSA Crypto
# and check that we don't fall back to Mbed TLS' internal crypto primitives.
run_test_psa TLS-ECDHE-ECDSA-WITH-AES-128-CCM
run_test_psa TLS-ECDHE-ECDSA-WITH-AES-128-CCM-8
run_test_psa TLS-ECDHE-ECDSA-WITH-AES-256-CCM
run_test_psa TLS-ECDHE-ECDSA-WITH-AES-256-CCM-8
run_test_psa TLS-ECDHE-ECDSA-WITH-AES-128-GCM-SHA256
run_test_psa TLS-ECDHE-ECDSA-WITH-AES-256-GCM-SHA384
run_test_psa TLS-ECDHE-ECDSA-WITH-AES-128-CBC-SHA
run_test_psa TLS-ECDHE-ECDSA-WITH-AES-128-CBC-SHA256
run_test_psa TLS-ECDHE-ECDSA-WITH-AES-256-CBC-SHA384
requires_config_enabled MBEDTLS_ECP_DP_SECP521R1_ENABLED
run_test_psa_force_curve "secp521r1"
requires_config_enabled MBEDTLS_ECP_DP_BP512R1_ENABLED
run_test_psa_force_curve "brainpoolP512r1"
requires_config_enabled MBEDTLS_ECP_DP_SECP384R1_ENABLED
run_test_psa_force_curve "secp384r1"
requires_config_enabled MBEDTLS_ECP_DP_BP384R1_ENABLED
run_test_psa_force_curve "brainpoolP384r1"
requires_config_enabled MBEDTLS_ECP_DP_SECP256R1_ENABLED
run_test_psa_force_curve "secp256r1"
requires_config_enabled MBEDTLS_ECP_DP_SECP256K1_ENABLED
run_test_psa_force_curve "secp256k1"
requires_config_enabled MBEDTLS_ECP_DP_BP256R1_ENABLED
run_test_psa_force_curve "brainpoolP256r1"
requires_config_enabled MBEDTLS_ECP_DP_SECP224R1_ENABLED
run_test_psa_force_curve "secp224r1"
requires_config_enabled MBEDTLS_ECP_DP_SECP224K1_ENABLED
run_test_psa_force_curve "secp224k1"
requires_config_enabled MBEDTLS_ECP_DP_SECP192R1_ENABLED
run_test_psa_force_curve "secp192r1"
requires_config_enabled MBEDTLS_ECP_DP_SECP192K1_ENABLED
run_test_psa_force_curve "secp192k1"
# Test current time in ServerHello
requires_config_enabled MBEDTLS_HAVE_TIME
run_test "ServerHello contains gmt_unix_time" \
"$P_SRV debug_level=3" \
"$P_CLI debug_level=3" \
0 \
-f "check_server_hello_time" \
-F "check_server_hello_time"
# Test for uniqueness of IVs in AEAD ciphersuites
run_test "Unique IV in GCM" \
"$P_SRV exchanges=20 debug_level=4" \
"$P_CLI exchanges=20 debug_level=4 force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-256-GCM-SHA384" \
0 \
-u "IV used" \
-U "IV used"
# Tests for certificate verification callback
run_test "Configuration-specific CRT verification callback" \
"$P_SRV debug_level=3" \
"$P_CLI context_crt_cb=0 debug_level=3" \
0 \
-S "error" \
-c "Verify requested for " \
-c "Use configuration-specific verification callback" \
-C "Use context-specific verification callback" \
-C "error"
run_test "Context-specific CRT verification callback" \
"$P_SRV debug_level=3" \
"$P_CLI context_crt_cb=1 debug_level=3" \
0 \
-S "error" \
-c "Verify requested for " \
-c "Use context-specific verification callback" \
-C "Use configuration-specific verification callback" \
-C "error"
# Tests for rc4 option
requires_config_enabled MBEDTLS_REMOVE_ARC4_CIPHERSUITES
run_test "RC4: server disabled, client enabled" \
"$P_SRV" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
1 \
-s "SSL - The server has no ciphersuites in common"
requires_config_enabled MBEDTLS_REMOVE_ARC4_CIPHERSUITES
run_test "RC4: server half, client enabled" \
"$P_SRV arc4=1" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
1 \
-s "SSL - The server has no ciphersuites in common"
run_test "RC4: server enabled, client disabled" \
"$P_SRV force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
"$P_CLI" \
1 \
-s "SSL - The server has no ciphersuites in common"
run_test "RC4: both enabled" \
"$P_SRV force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
0 \
-S "SSL - None of the common ciphersuites is usable" \
-S "SSL - The server has no ciphersuites in common"
# Test empty CA list in CertificateRequest in TLS 1.1 and earlier
requires_gnutls
requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_1
run_test "CertificateRequest with empty CA list, TLS 1.1 (GnuTLS server)" \
"$G_SRV"\
"$P_CLI force_version=tls1_1" \
0
requires_gnutls
requires_config_enabled MBEDTLS_SSL_PROTO_TLS1
run_test "CertificateRequest with empty CA list, TLS 1.0 (GnuTLS server)" \
"$G_SRV"\
"$P_CLI force_version=tls1" \
0
# Tests for SHA-1 support
requires_config_disabled MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_CERTIFICATES
run_test "SHA-1 forbidden by default in server certificate" \
"$P_SRV key_file=data_files/server2.key crt_file=data_files/server2.crt" \
"$P_CLI debug_level=2 allow_sha1=0" \
1 \
-c "The certificate is signed with an unacceptable hash"
requires_config_enabled MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_CERTIFICATES
run_test "SHA-1 allowed by default in server certificate" \
"$P_SRV key_file=data_files/server2.key crt_file=data_files/server2.crt" \
"$P_CLI debug_level=2 allow_sha1=0" \
0
run_test "SHA-1 explicitly allowed in server certificate" \
"$P_SRV key_file=data_files/server2.key crt_file=data_files/server2.crt" \
"$P_CLI allow_sha1=1" \
0
run_test "SHA-256 allowed by default in server certificate" \
"$P_SRV key_file=data_files/server2.key crt_file=data_files/server2-sha256.crt" \
"$P_CLI allow_sha1=0" \
0
requires_config_disabled MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_CERTIFICATES
run_test "SHA-1 forbidden by default in client certificate" \
"$P_SRV auth_mode=required allow_sha1=0" \
"$P_CLI key_file=data_files/cli-rsa.key crt_file=data_files/cli-rsa-sha1.crt" \
1 \
-s "The certificate is signed with an unacceptable hash"
requires_config_enabled MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_CERTIFICATES
run_test "SHA-1 allowed by default in client certificate" \
"$P_SRV auth_mode=required allow_sha1=0" \
"$P_CLI key_file=data_files/cli-rsa.key crt_file=data_files/cli-rsa-sha1.crt" \
0
run_test "SHA-1 explicitly allowed in client certificate" \
"$P_SRV auth_mode=required allow_sha1=1" \
"$P_CLI key_file=data_files/cli-rsa.key crt_file=data_files/cli-rsa-sha1.crt" \
0
run_test "SHA-256 allowed by default in client certificate" \
"$P_SRV auth_mode=required allow_sha1=0" \
"$P_CLI key_file=data_files/cli-rsa.key crt_file=data_files/cli-rsa-sha256.crt" \
0
# Tests for datagram packing
run_test "DTLS: multiple records in same datagram, client and server" \
"$P_SRV dtls=1 dgram_packing=1 debug_level=2" \
"$P_CLI dtls=1 dgram_packing=1 debug_level=2" \
0 \
-c "next record in same datagram" \
-s "next record in same datagram"
run_test "DTLS: multiple records in same datagram, client only" \
"$P_SRV dtls=1 dgram_packing=0 debug_level=2" \
"$P_CLI dtls=1 dgram_packing=1 debug_level=2" \
0 \
-s "next record in same datagram" \
-C "next record in same datagram"
run_test "DTLS: multiple records in same datagram, server only" \
"$P_SRV dtls=1 dgram_packing=1 debug_level=2" \
"$P_CLI dtls=1 dgram_packing=0 debug_level=2" \
0 \
-S "next record in same datagram" \
-c "next record in same datagram"
run_test "DTLS: multiple records in same datagram, neither client nor server" \
"$P_SRV dtls=1 dgram_packing=0 debug_level=2" \
"$P_CLI dtls=1 dgram_packing=0 debug_level=2" \
0 \
-S "next record in same datagram" \
-C "next record in same datagram"
# Tests for Truncated HMAC extension
run_test "Truncated HMAC: client default, server default" \
"$P_SRV debug_level=4" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
0 \
-s "dumping 'expected mac' (20 bytes)" \
-S "dumping 'expected mac' (10 bytes)"
requires_config_enabled MBEDTLS_SSL_TRUNCATED_HMAC
run_test "Truncated HMAC: client disabled, server default" \
"$P_SRV debug_level=4" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA trunc_hmac=0" \
0 \
-s "dumping 'expected mac' (20 bytes)" \
-S "dumping 'expected mac' (10 bytes)"
requires_config_enabled MBEDTLS_SSL_TRUNCATED_HMAC
run_test "Truncated HMAC: client enabled, server default" \
"$P_SRV debug_level=4" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA trunc_hmac=1" \
0 \
-s "dumping 'expected mac' (20 bytes)" \
-S "dumping 'expected mac' (10 bytes)"
requires_config_enabled MBEDTLS_SSL_TRUNCATED_HMAC
run_test "Truncated HMAC: client enabled, server disabled" \
"$P_SRV debug_level=4 trunc_hmac=0" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA trunc_hmac=1" \
0 \
-s "dumping 'expected mac' (20 bytes)" \
-S "dumping 'expected mac' (10 bytes)"
requires_config_enabled MBEDTLS_SSL_TRUNCATED_HMAC
run_test "Truncated HMAC: client disabled, server enabled" \
"$P_SRV debug_level=4 trunc_hmac=1" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA trunc_hmac=0" \
0 \
-s "dumping 'expected mac' (20 bytes)" \
-S "dumping 'expected mac' (10 bytes)"
requires_config_enabled MBEDTLS_SSL_TRUNCATED_HMAC
run_test "Truncated HMAC: client enabled, server enabled" \
"$P_SRV debug_level=4 trunc_hmac=1" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA trunc_hmac=1" \
0 \
-S "dumping 'expected mac' (20 bytes)" \
-s "dumping 'expected mac' (10 bytes)"
run_test "Truncated HMAC, DTLS: client default, server default" \
"$P_SRV dtls=1 debug_level=4" \
"$P_CLI dtls=1 force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
0 \
-s "dumping 'expected mac' (20 bytes)" \
-S "dumping 'expected mac' (10 bytes)"
requires_config_enabled MBEDTLS_SSL_TRUNCATED_HMAC
run_test "Truncated HMAC, DTLS: client disabled, server default" \
"$P_SRV dtls=1 debug_level=4" \
"$P_CLI dtls=1 force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA trunc_hmac=0" \
0 \
-s "dumping 'expected mac' (20 bytes)" \
-S "dumping 'expected mac' (10 bytes)"
requires_config_enabled MBEDTLS_SSL_TRUNCATED_HMAC
run_test "Truncated HMAC, DTLS: client enabled, server default" \
"$P_SRV dtls=1 debug_level=4" \
"$P_CLI dtls=1 force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA trunc_hmac=1" \
0 \
-s "dumping 'expected mac' (20 bytes)" \
-S "dumping 'expected mac' (10 bytes)"
requires_config_enabled MBEDTLS_SSL_TRUNCATED_HMAC
run_test "Truncated HMAC, DTLS: client enabled, server disabled" \
"$P_SRV dtls=1 debug_level=4 trunc_hmac=0" \
"$P_CLI dtls=1 force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA trunc_hmac=1" \
0 \
-s "dumping 'expected mac' (20 bytes)" \
-S "dumping 'expected mac' (10 bytes)"
requires_config_enabled MBEDTLS_SSL_TRUNCATED_HMAC
run_test "Truncated HMAC, DTLS: client disabled, server enabled" \
"$P_SRV dtls=1 debug_level=4 trunc_hmac=1" \
"$P_CLI dtls=1 force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA trunc_hmac=0" \
0 \
-s "dumping 'expected mac' (20 bytes)" \
-S "dumping 'expected mac' (10 bytes)"
requires_config_enabled MBEDTLS_SSL_TRUNCATED_HMAC
run_test "Truncated HMAC, DTLS: client enabled, server enabled" \
"$P_SRV dtls=1 debug_level=4 trunc_hmac=1" \
"$P_CLI dtls=1 force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA trunc_hmac=1" \
0 \
-S "dumping 'expected mac' (20 bytes)" \
-s "dumping 'expected mac' (10 bytes)"
# Tests for Context serialization
requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
run_test "Context serialization, client serializes, CCM" \
"$P_SRV dtls=1 serialize=0 exchanges=2" \
"$P_CLI dtls=1 serialize=1 exchanges=2 force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-CCM-8" \
0 \
-c "Deserializing connection..." \
-S "Deserializing connection..."
requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
run_test "Context serialization, client serializes, ChaChaPoly" \
"$P_SRV dtls=1 serialize=0 exchanges=2" \
"$P_CLI dtls=1 serialize=1 exchanges=2 force_ciphersuite=TLS-ECDHE-ECDSA-WITH-CHACHA20-POLY1305-SHA256" \
0 \
-c "Deserializing connection..." \
-S "Deserializing connection..."
requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
run_test "Context serialization, client serializes, GCM" \
"$P_SRV dtls=1 serialize=0 exchanges=2" \
"$P_CLI dtls=1 serialize=1 exchanges=2 force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-GCM-SHA256" \
0 \
-c "Deserializing connection..." \
-S "Deserializing connection..."
requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
run_test "Context serialization, client serializes, with CID" \
"$P_SRV dtls=1 serialize=0 exchanges=2 cid=1 cid_val=dead" \
"$P_CLI dtls=1 serialize=1 exchanges=2 cid=1 cid_val=beef" \
0 \
-c "Deserializing connection..." \
-S "Deserializing connection..."
requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
run_test "Context serialization, server serializes, CCM" \
"$P_SRV dtls=1 serialize=1 exchanges=2" \
"$P_CLI dtls=1 serialize=0 exchanges=2 force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-CCM-8" \
0 \
-C "Deserializing connection..." \
-s "Deserializing connection..."
requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
run_test "Context serialization, server serializes, ChaChaPoly" \
"$P_SRV dtls=1 serialize=1 exchanges=2" \
"$P_CLI dtls=1 serialize=0 exchanges=2 force_ciphersuite=TLS-ECDHE-ECDSA-WITH-CHACHA20-POLY1305-SHA256" \
0 \
-C "Deserializing connection..." \
-s "Deserializing connection..."
requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
run_test "Context serialization, server serializes, GCM" \
"$P_SRV dtls=1 serialize=1 exchanges=2" \
"$P_CLI dtls=1 serialize=0 exchanges=2 force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-GCM-SHA256" \
0 \
-C "Deserializing connection..." \
-s "Deserializing connection..."
requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
run_test "Context serialization, server serializes, with CID" \
"$P_SRV dtls=1 serialize=1 exchanges=2 cid=1 cid_val=dead" \
"$P_CLI dtls=1 serialize=0 exchanges=2 cid=1 cid_val=beef" \
0 \
-C "Deserializing connection..." \
-s "Deserializing connection..."
requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
run_test "Context serialization, both serialize, CCM" \
"$P_SRV dtls=1 serialize=1 exchanges=2" \
"$P_CLI dtls=1 serialize=1 exchanges=2 force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-CCM-8" \
0 \
-c "Deserializing connection..." \
-s "Deserializing connection..."
requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
run_test "Context serialization, both serialize, ChaChaPoly" \
"$P_SRV dtls=1 serialize=1 exchanges=2" \
"$P_CLI dtls=1 serialize=1 exchanges=2 force_ciphersuite=TLS-ECDHE-ECDSA-WITH-CHACHA20-POLY1305-SHA256" \
0 \
-c "Deserializing connection..." \
-s "Deserializing connection..."
requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
run_test "Context serialization, both serialize, GCM" \
"$P_SRV dtls=1 serialize=1 exchanges=2" \
"$P_CLI dtls=1 serialize=1 exchanges=2 force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-GCM-SHA256" \
0 \
-c "Deserializing connection..." \
-s "Deserializing connection..."
requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
run_test "Context serialization, both serialize, with CID" \
"$P_SRV dtls=1 serialize=1 exchanges=2 cid=1 cid_val=dead" \
"$P_CLI dtls=1 serialize=1 exchanges=2 cid=1 cid_val=beef" \
0 \
-c "Deserializing connection..." \
-s "Deserializing connection..."
requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
run_test "Context serialization, re-init, client serializes, CCM" \
"$P_SRV dtls=1 serialize=0 exchanges=2" \
"$P_CLI dtls=1 serialize=2 exchanges=2 force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-CCM-8" \
0 \
-c "Deserializing connection..." \
-S "Deserializing connection..."
requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
run_test "Context serialization, re-init, client serializes, ChaChaPoly" \
"$P_SRV dtls=1 serialize=0 exchanges=2" \
"$P_CLI dtls=1 serialize=2 exchanges=2 force_ciphersuite=TLS-ECDHE-ECDSA-WITH-CHACHA20-POLY1305-SHA256" \
0 \
-c "Deserializing connection..." \
-S "Deserializing connection..."
requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
run_test "Context serialization, re-init, client serializes, GCM" \
"$P_SRV dtls=1 serialize=0 exchanges=2" \
"$P_CLI dtls=1 serialize=2 exchanges=2 force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-GCM-SHA256" \
0 \
-c "Deserializing connection..." \
-S "Deserializing connection..."
requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
run_test "Context serialization, re-init, client serializes, with CID" \
"$P_SRV dtls=1 serialize=0 exchanges=2 cid=1 cid_val=dead" \
"$P_CLI dtls=1 serialize=2 exchanges=2 cid=1 cid_val=beef" \
0 \
-c "Deserializing connection..." \
-S "Deserializing connection..."
requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
run_test "Context serialization, re-init, server serializes, CCM" \
"$P_SRV dtls=1 serialize=2 exchanges=2" \
"$P_CLI dtls=1 serialize=0 exchanges=2 force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-CCM-8" \
0 \
-C "Deserializing connection..." \
-s "Deserializing connection..."
requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
run_test "Context serialization, re-init, server serializes, ChaChaPoly" \
"$P_SRV dtls=1 serialize=2 exchanges=2" \
"$P_CLI dtls=1 serialize=0 exchanges=2 force_ciphersuite=TLS-ECDHE-ECDSA-WITH-CHACHA20-POLY1305-SHA256" \
0 \
-C "Deserializing connection..." \
-s "Deserializing connection..."
requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
run_test "Context serialization, re-init, server serializes, GCM" \
"$P_SRV dtls=1 serialize=2 exchanges=2" \
"$P_CLI dtls=1 serialize=0 exchanges=2 force_ciphersuite=TLS-ECDHE-ECDSA-WITH-CHACHA20-POLY1305-SHA256" \
0 \
-C "Deserializing connection..." \
-s "Deserializing connection..."
requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
run_test "Context serialization, re-init, server serializes, with CID" \
"$P_SRV dtls=1 serialize=2 exchanges=2 cid=1 cid_val=dead" \
"$P_CLI dtls=1 serialize=0 exchanges=2 cid=1 cid_val=beef" \
0 \
-C "Deserializing connection..." \
-s "Deserializing connection..."
requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
run_test "Context serialization, re-init, both serialize, CCM" \
"$P_SRV dtls=1 serialize=2 exchanges=2" \
"$P_CLI dtls=1 serialize=2 exchanges=2 force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-CCM-8" \
0 \
-c "Deserializing connection..." \
-s "Deserializing connection..."
requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
run_test "Context serialization, re-init, both serialize, ChaChaPoly" \
"$P_SRV dtls=1 serialize=2 exchanges=2" \
"$P_CLI dtls=1 serialize=2 exchanges=2 force_ciphersuite=TLS-ECDHE-ECDSA-WITH-CHACHA20-POLY1305-SHA256" \
0 \
-c "Deserializing connection..." \
-s "Deserializing connection..."
requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
run_test "Context serialization, re-init, both serialize, GCM" \
"$P_SRV dtls=1 serialize=2 exchanges=2" \
"$P_CLI dtls=1 serialize=2 exchanges=2 force_ciphersuite=TLS-ECDHE-ECDSA-WITH-CHACHA20-POLY1305-SHA256" \
0 \
-c "Deserializing connection..." \
-s "Deserializing connection..."
requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
run_test "Context serialization, re-init, both serialize, with CID" \
"$P_SRV dtls=1 serialize=2 exchanges=2 cid=1 cid_val=dead" \
"$P_CLI dtls=1 serialize=2 exchanges=2 cid=1 cid_val=beef" \
0 \
-c "Deserializing connection..." \
-s "Deserializing connection..."
requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
run_test "Saving the serialized context to a file" \
"$P_SRV dtls=1 serialize=1 context_file=context_srv.txt" \
"$P_CLI dtls=1 serialize=1 context_file=context_cli.txt" \
0 \
-s "Save serialized context to a file... ok" \
-c "Save serialized context to a file... ok"
rm -f context_srv.txt
rm -f context_cli.txt
# Tests for DTLS Connection ID extension
# So far, the CID API isn't implemented, so we can't
# grep for output witnessing its use. This needs to be
# changed once the CID extension is implemented.
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
run_test "Connection ID: Cli enabled, Srv disabled" \
"$P_SRV debug_level=3 dtls=1 cid=0" \
"$P_CLI debug_level=3 dtls=1 cid=1 cid_val=deadbeef" \
0 \
-s "Disable use of CID extension." \
-s "found CID extension" \
-s "Client sent CID extension, but CID disabled" \
-c "Enable use of CID extension." \
-c "client hello, adding CID extension" \
-S "server hello, adding CID extension" \
-C "found CID extension" \
-S "Copy CIDs into SSL transform" \
-C "Copy CIDs into SSL transform" \
-c "Use of Connection ID was rejected by the server"
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
run_test "Connection ID: Cli disabled, Srv enabled" \
"$P_SRV debug_level=3 dtls=1 cid=1 cid_val=deadbeef" \
"$P_CLI debug_level=3 dtls=1 cid=0" \
0 \
-c "Disable use of CID extension." \
-C "client hello, adding CID extension" \
-S "found CID extension" \
-s "Enable use of CID extension." \
-S "server hello, adding CID extension" \
-C "found CID extension" \
-S "Copy CIDs into SSL transform" \
-C "Copy CIDs into SSL transform" \
-s "Use of Connection ID was not offered by client"
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
run_test "Connection ID: Cli+Srv enabled, Cli+Srv CID nonempty" \
"$P_SRV debug_level=3 dtls=1 cid=1 cid_val=dead" \
"$P_CLI debug_level=3 dtls=1 cid=1 cid_val=beef" \
0 \
-c "Enable use of CID extension." \
-s "Enable use of CID extension." \
-c "client hello, adding CID extension" \
-s "found CID extension" \
-s "Use of CID extension negotiated" \
-s "server hello, adding CID extension" \
-c "found CID extension" \
-c "Use of CID extension negotiated" \
-s "Copy CIDs into SSL transform" \
-c "Copy CIDs into SSL transform" \
-c "Peer CID (length 2 Bytes): de ad" \
-s "Peer CID (length 2 Bytes): be ef" \
-s "Use of Connection ID has been negotiated" \
-c "Use of Connection ID has been negotiated"
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
run_test "Connection ID, 3D: Cli+Srv enabled, Cli+Srv CID nonempty" \
-p "$P_PXY drop=5 delay=5 duplicate=5 bad_cid=1" \
"$P_SRV debug_level=3 dtls=1 cid=1 dgram_packing=0 cid_val=dead" \
"$P_CLI debug_level=3 dtls=1 cid=1 dgram_packing=0 cid_val=beef" \
0 \
-c "Enable use of CID extension." \
-s "Enable use of CID extension." \
-c "client hello, adding CID extension" \
-s "found CID extension" \
-s "Use of CID extension negotiated" \
-s "server hello, adding CID extension" \
-c "found CID extension" \
-c "Use of CID extension negotiated" \
-s "Copy CIDs into SSL transform" \
-c "Copy CIDs into SSL transform" \
-c "Peer CID (length 2 Bytes): de ad" \
-s "Peer CID (length 2 Bytes): be ef" \
-s "Use of Connection ID has been negotiated" \
-c "Use of Connection ID has been negotiated" \
-c "ignoring unexpected CID" \
-s "ignoring unexpected CID"
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
run_test "Connection ID, MTU: Cli+Srv enabled, Cli+Srv CID nonempty" \
-p "$P_PXY mtu=800" \
"$P_SRV debug_level=3 mtu=800 dtls=1 cid=1 cid_val=dead" \
"$P_CLI debug_level=3 mtu=800 dtls=1 cid=1 cid_val=beef" \
0 \
-c "Enable use of CID extension." \
-s "Enable use of CID extension." \
-c "client hello, adding CID extension" \
-s "found CID extension" \
-s "Use of CID extension negotiated" \
-s "server hello, adding CID extension" \
-c "found CID extension" \
-c "Use of CID extension negotiated" \
-s "Copy CIDs into SSL transform" \
-c "Copy CIDs into SSL transform" \
-c "Peer CID (length 2 Bytes): de ad" \
-s "Peer CID (length 2 Bytes): be ef" \
-s "Use of Connection ID has been negotiated" \
-c "Use of Connection ID has been negotiated"
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
run_test "Connection ID, 3D+MTU: Cli+Srv enabled, Cli+Srv CID nonempty" \
-p "$P_PXY mtu=800 drop=5 delay=5 duplicate=5 bad_cid=1" \
"$P_SRV debug_level=3 mtu=800 dtls=1 cid=1 cid_val=dead" \
"$P_CLI debug_level=3 mtu=800 dtls=1 cid=1 cid_val=beef" \
0 \
-c "Enable use of CID extension." \
-s "Enable use of CID extension." \
-c "client hello, adding CID extension" \
-s "found CID extension" \
-s "Use of CID extension negotiated" \
-s "server hello, adding CID extension" \
-c "found CID extension" \
-c "Use of CID extension negotiated" \
-s "Copy CIDs into SSL transform" \
-c "Copy CIDs into SSL transform" \
-c "Peer CID (length 2 Bytes): de ad" \
-s "Peer CID (length 2 Bytes): be ef" \
-s "Use of Connection ID has been negotiated" \
-c "Use of Connection ID has been negotiated" \
-c "ignoring unexpected CID" \
-s "ignoring unexpected CID"
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
run_test "Connection ID: Cli+Srv enabled, Cli CID empty" \
"$P_SRV debug_level=3 dtls=1 cid=1 cid_val=deadbeef" \
"$P_CLI debug_level=3 dtls=1 cid=1" \
0 \
-c "Enable use of CID extension." \
-s "Enable use of CID extension." \
-c "client hello, adding CID extension" \
-s "found CID extension" \
-s "Use of CID extension negotiated" \
-s "server hello, adding CID extension" \
-c "found CID extension" \
-c "Use of CID extension negotiated" \
-s "Copy CIDs into SSL transform" \
-c "Copy CIDs into SSL transform" \
-c "Peer CID (length 4 Bytes): de ad be ef" \
-s "Peer CID (length 0 Bytes):" \
-s "Use of Connection ID has been negotiated" \
-c "Use of Connection ID has been negotiated"
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
run_test "Connection ID: Cli+Srv enabled, Srv CID empty" \
"$P_SRV debug_level=3 dtls=1 cid=1" \
"$P_CLI debug_level=3 dtls=1 cid=1 cid_val=deadbeef" \
0 \
-c "Enable use of CID extension." \
-s "Enable use of CID extension." \
-c "client hello, adding CID extension" \
-s "found CID extension" \
-s "Use of CID extension negotiated" \
-s "server hello, adding CID extension" \
-c "found CID extension" \
-c "Use of CID extension negotiated" \
-s "Copy CIDs into SSL transform" \
-c "Copy CIDs into SSL transform" \
-s "Peer CID (length 4 Bytes): de ad be ef" \
-c "Peer CID (length 0 Bytes):" \
-s "Use of Connection ID has been negotiated" \
-c "Use of Connection ID has been negotiated"
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
run_test "Connection ID: Cli+Srv enabled, Cli+Srv CID empty" \
"$P_SRV debug_level=3 dtls=1 cid=1" \
"$P_CLI debug_level=3 dtls=1 cid=1" \
0 \
-c "Enable use of CID extension." \
-s "Enable use of CID extension." \
-c "client hello, adding CID extension" \
-s "found CID extension" \
-s "Use of CID extension negotiated" \
-s "server hello, adding CID extension" \
-c "found CID extension" \
-c "Use of CID extension negotiated" \
-s "Copy CIDs into SSL transform" \
-c "Copy CIDs into SSL transform" \
-S "Use of Connection ID has been negotiated" \
-C "Use of Connection ID has been negotiated"
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
run_test "Connection ID: Cli+Srv enabled, Cli+Srv CID nonempty, AES-128-CCM-8" \
"$P_SRV debug_level=3 dtls=1 cid=1 cid_val=dead" \
"$P_CLI debug_level=3 dtls=1 cid=1 cid_val=beef force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-CCM-8" \
0 \
-c "Enable use of CID extension." \
-s "Enable use of CID extension." \
-c "client hello, adding CID extension" \
-s "found CID extension" \
-s "Use of CID extension negotiated" \
-s "server hello, adding CID extension" \
-c "found CID extension" \
-c "Use of CID extension negotiated" \
-s "Copy CIDs into SSL transform" \
-c "Copy CIDs into SSL transform" \
-c "Peer CID (length 2 Bytes): de ad" \
-s "Peer CID (length 2 Bytes): be ef" \
-s "Use of Connection ID has been negotiated" \
-c "Use of Connection ID has been negotiated"
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
run_test "Connection ID: Cli+Srv enabled, Cli CID empty, AES-128-CCM-8" \
"$P_SRV debug_level=3 dtls=1 cid=1 cid_val=deadbeef" \
"$P_CLI debug_level=3 dtls=1 cid=1 force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-CCM-8" \
0 \
-c "Enable use of CID extension." \
-s "Enable use of CID extension." \
-c "client hello, adding CID extension" \
-s "found CID extension" \
-s "Use of CID extension negotiated" \
-s "server hello, adding CID extension" \
-c "found CID extension" \
-c "Use of CID extension negotiated" \
-s "Copy CIDs into SSL transform" \
-c "Copy CIDs into SSL transform" \
-c "Peer CID (length 4 Bytes): de ad be ef" \
-s "Peer CID (length 0 Bytes):" \
-s "Use of Connection ID has been negotiated" \
-c "Use of Connection ID has been negotiated"
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
run_test "Connection ID: Cli+Srv enabled, Srv CID empty, AES-128-CCM-8" \
"$P_SRV debug_level=3 dtls=1 cid=1" \
"$P_CLI debug_level=3 dtls=1 cid=1 cid_val=deadbeef force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-CCM-8" \
0 \
-c "Enable use of CID extension." \
-s "Enable use of CID extension." \
-c "client hello, adding CID extension" \
-s "found CID extension" \
-s "Use of CID extension negotiated" \
-s "server hello, adding CID extension" \
-c "found CID extension" \
-c "Use of CID extension negotiated" \
-s "Copy CIDs into SSL transform" \
-c "Copy CIDs into SSL transform" \
-s "Peer CID (length 4 Bytes): de ad be ef" \
-c "Peer CID (length 0 Bytes):" \
-s "Use of Connection ID has been negotiated" \
-c "Use of Connection ID has been negotiated"
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
run_test "Connection ID: Cli+Srv enabled, Cli+Srv CID empty, AES-128-CCM-8" \
"$P_SRV debug_level=3 dtls=1 cid=1" \
"$P_CLI debug_level=3 dtls=1 cid=1 force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-CCM-8" \
0 \
-c "Enable use of CID extension." \
-s "Enable use of CID extension." \
-c "client hello, adding CID extension" \
-s "found CID extension" \
-s "Use of CID extension negotiated" \
-s "server hello, adding CID extension" \
-c "found CID extension" \
-c "Use of CID extension negotiated" \
-s "Copy CIDs into SSL transform" \
-c "Copy CIDs into SSL transform" \
-S "Use of Connection ID has been negotiated" \
-C "Use of Connection ID has been negotiated"
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
run_test "Connection ID: Cli+Srv enabled, Cli+Srv CID nonempty, AES-128-CBC" \
"$P_SRV debug_level=3 dtls=1 cid=1 cid_val=dead" \
"$P_CLI debug_level=3 dtls=1 cid=1 cid_val=beef force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-CBC-SHA256" \
0 \
-c "Enable use of CID extension." \
-s "Enable use of CID extension." \
-c "client hello, adding CID extension" \
-s "found CID extension" \
-s "Use of CID extension negotiated" \
-s "server hello, adding CID extension" \
-c "found CID extension" \
-c "Use of CID extension negotiated" \
-s "Copy CIDs into SSL transform" \
-c "Copy CIDs into SSL transform" \
-c "Peer CID (length 2 Bytes): de ad" \
-s "Peer CID (length 2 Bytes): be ef" \
-s "Use of Connection ID has been negotiated" \
-c "Use of Connection ID has been negotiated"
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
run_test "Connection ID: Cli+Srv enabled, Cli CID empty, AES-128-CBC" \
"$P_SRV debug_level=3 dtls=1 cid=1 cid_val=deadbeef" \
"$P_CLI debug_level=3 dtls=1 cid=1 force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-CBC-SHA256" \
0 \
-c "Enable use of CID extension." \
-s "Enable use of CID extension." \
-c "client hello, adding CID extension" \
-s "found CID extension" \
-s "Use of CID extension negotiated" \
-s "server hello, adding CID extension" \
-c "found CID extension" \
-c "Use of CID extension negotiated" \
-s "Copy CIDs into SSL transform" \
-c "Copy CIDs into SSL transform" \
-c "Peer CID (length 4 Bytes): de ad be ef" \
-s "Peer CID (length 0 Bytes):" \
-s "Use of Connection ID has been negotiated" \
-c "Use of Connection ID has been negotiated"
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
run_test "Connection ID: Cli+Srv enabled, Srv CID empty, AES-128-CBC" \
"$P_SRV debug_level=3 dtls=1 cid=1" \
"$P_CLI debug_level=3 dtls=1 cid=1 cid_val=deadbeef force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-CBC-SHA256" \
0 \
-c "Enable use of CID extension." \
-s "Enable use of CID extension." \
-c "client hello, adding CID extension" \
-s "found CID extension" \
-s "Use of CID extension negotiated" \
-s "server hello, adding CID extension" \
-c "found CID extension" \
-c "Use of CID extension negotiated" \
-s "Copy CIDs into SSL transform" \
-c "Copy CIDs into SSL transform" \
-s "Peer CID (length 4 Bytes): de ad be ef" \
-c "Peer CID (length 0 Bytes):" \
-s "Use of Connection ID has been negotiated" \
-c "Use of Connection ID has been negotiated"
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
run_test "Connection ID: Cli+Srv enabled, Cli+Srv CID empty, AES-128-CBC" \
"$P_SRV debug_level=3 dtls=1 cid=1" \
"$P_CLI debug_level=3 dtls=1 cid=1 force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-CBC-SHA256" \
0 \
-c "Enable use of CID extension." \
-s "Enable use of CID extension." \
-c "client hello, adding CID extension" \
-s "found CID extension" \
-s "Use of CID extension negotiated" \
-s "server hello, adding CID extension" \
-c "found CID extension" \
-c "Use of CID extension negotiated" \
-s "Copy CIDs into SSL transform" \
-c "Copy CIDs into SSL transform" \
-S "Use of Connection ID has been negotiated" \
-C "Use of Connection ID has been negotiated"
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Connection ID: Cli+Srv enabled, renegotiate without change of CID" \
"$P_SRV debug_level=3 dtls=1 cid=1 cid_val=dead renegotiation=1" \
"$P_CLI debug_level=3 dtls=1 cid=1 cid_val=beef renegotiation=1 renegotiate=1" \
0 \
-c "(initial handshake) Peer CID (length 2 Bytes): de ad" \
-s "(initial handshake) Peer CID (length 2 Bytes): be ef" \
-s "(initial handshake) Use of Connection ID has been negotiated" \
-c "(initial handshake) Use of Connection ID has been negotiated" \
-c "(after renegotiation) Peer CID (length 2 Bytes): de ad" \
-s "(after renegotiation) Peer CID (length 2 Bytes): be ef" \
-s "(after renegotiation) Use of Connection ID has been negotiated" \
-c "(after renegotiation) Use of Connection ID has been negotiated"
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Connection ID: Cli+Srv enabled, renegotiate with different CID" \
"$P_SRV debug_level=3 dtls=1 cid=1 cid_val=dead cid_val_renego=beef renegotiation=1" \
"$P_CLI debug_level=3 dtls=1 cid=1 cid_val=beef cid_val_renego=dead renegotiation=1 renegotiate=1" \
0 \
-c "(initial handshake) Peer CID (length 2 Bytes): de ad" \
-s "(initial handshake) Peer CID (length 2 Bytes): be ef" \
-s "(initial handshake) Use of Connection ID has been negotiated" \
-c "(initial handshake) Use of Connection ID has been negotiated" \
-c "(after renegotiation) Peer CID (length 2 Bytes): be ef" \
-s "(after renegotiation) Peer CID (length 2 Bytes): de ad" \
-s "(after renegotiation) Use of Connection ID has been negotiated" \
-c "(after renegotiation) Use of Connection ID has been negotiated"
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Connection ID, no packing: Cli+Srv enabled, renegotiate with different CID" \
"$P_SRV debug_level=3 dtls=1 cid=1 dgram_packing=0 cid_val=dead cid_val_renego=beef renegotiation=1" \
"$P_CLI debug_level=3 dtls=1 cid=1 dgram_packing=0 cid_val=beef cid_val_renego=dead renegotiation=1 renegotiate=1" \
0 \
-c "(initial handshake) Peer CID (length 2 Bytes): de ad" \
-s "(initial handshake) Peer CID (length 2 Bytes): be ef" \
-s "(initial handshake) Use of Connection ID has been negotiated" \
-c "(initial handshake) Use of Connection ID has been negotiated" \
-c "(after renegotiation) Peer CID (length 2 Bytes): be ef" \
-s "(after renegotiation) Peer CID (length 2 Bytes): de ad" \
-s "(after renegotiation) Use of Connection ID has been negotiated" \
-c "(after renegotiation) Use of Connection ID has been negotiated"
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Connection ID, 3D+MTU: Cli+Srv enabled, renegotiate with different CID" \
-p "$P_PXY mtu=800 drop=5 delay=5 duplicate=5 bad_cid=1" \
"$P_SRV debug_level=3 mtu=800 dtls=1 cid=1 cid_val=dead cid_val_renego=beef renegotiation=1" \
"$P_CLI debug_level=3 mtu=800 dtls=1 cid=1 cid_val=beef cid_val_renego=dead renegotiation=1 renegotiate=1" \
0 \
-c "(initial handshake) Peer CID (length 2 Bytes): de ad" \
-s "(initial handshake) Peer CID (length 2 Bytes): be ef" \
-s "(initial handshake) Use of Connection ID has been negotiated" \
-c "(initial handshake) Use of Connection ID has been negotiated" \
-c "(after renegotiation) Peer CID (length 2 Bytes): be ef" \
-s "(after renegotiation) Peer CID (length 2 Bytes): de ad" \
-s "(after renegotiation) Use of Connection ID has been negotiated" \
-c "(after renegotiation) Use of Connection ID has been negotiated" \
-c "ignoring unexpected CID" \
-s "ignoring unexpected CID"
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Connection ID: Cli+Srv enabled, renegotiate without CID" \
"$P_SRV debug_level=3 dtls=1 cid=1 cid_val=dead cid_renego=0 renegotiation=1" \
"$P_CLI debug_level=3 dtls=1 cid=1 cid_val=beef cid_renego=0 renegotiation=1 renegotiate=1" \
0 \
-c "(initial handshake) Peer CID (length 2 Bytes): de ad" \
-s "(initial handshake) Peer CID (length 2 Bytes): be ef" \
-s "(initial handshake) Use of Connection ID has been negotiated" \
-c "(initial handshake) Use of Connection ID has been negotiated" \
-C "(after renegotiation) Peer CID (length 2 Bytes): de ad" \
-S "(after renegotiation) Peer CID (length 2 Bytes): be ef" \
-C "(after renegotiation) Use of Connection ID has been negotiated" \
-S "(after renegotiation) Use of Connection ID has been negotiated"
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Connection ID, no packing: Cli+Srv enabled, renegotiate without CID" \
"$P_SRV debug_level=3 dtls=1 dgram_packing=0 cid=1 cid_val=dead cid_renego=0 renegotiation=1" \
"$P_CLI debug_level=3 dtls=1 dgram_packing=0 cid=1 cid_val=beef cid_renego=0 renegotiation=1 renegotiate=1" \
0 \
-c "(initial handshake) Peer CID (length 2 Bytes): de ad" \
-s "(initial handshake) Peer CID (length 2 Bytes): be ef" \
-s "(initial handshake) Use of Connection ID has been negotiated" \
-c "(initial handshake) Use of Connection ID has been negotiated" \
-C "(after renegotiation) Peer CID (length 2 Bytes): de ad" \
-S "(after renegotiation) Peer CID (length 2 Bytes): be ef" \
-C "(after renegotiation) Use of Connection ID has been negotiated" \
-S "(after renegotiation) Use of Connection ID has been negotiated"
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Connection ID, 3D+MTU: Cli+Srv enabled, renegotiate without CID" \
-p "$P_PXY drop=5 delay=5 duplicate=5 bad_cid=1" \
"$P_SRV debug_level=3 mtu=800 dtls=1 cid=1 cid_val=dead cid_renego=0 renegotiation=1" \
"$P_CLI debug_level=3 mtu=800 dtls=1 cid=1 cid_val=beef cid_renego=0 renegotiation=1 renegotiate=1" \
0 \
-c "(initial handshake) Peer CID (length 2 Bytes): de ad" \
-s "(initial handshake) Peer CID (length 2 Bytes): be ef" \
-s "(initial handshake) Use of Connection ID has been negotiated" \
-c "(initial handshake) Use of Connection ID has been negotiated" \
-C "(after renegotiation) Peer CID (length 2 Bytes): de ad" \
-S "(after renegotiation) Peer CID (length 2 Bytes): be ef" \
-C "(after renegotiation) Use of Connection ID has been negotiated" \
-S "(after renegotiation) Use of Connection ID has been negotiated" \
-c "ignoring unexpected CID" \
-s "ignoring unexpected CID"
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Connection ID: Cli+Srv enabled, CID on renegotiation" \
"$P_SRV debug_level=3 dtls=1 cid=0 cid_renego=1 cid_val_renego=dead renegotiation=1" \
"$P_CLI debug_level=3 dtls=1 cid=0 cid_renego=1 cid_val_renego=beef renegotiation=1 renegotiate=1" \
0 \
-S "(initial handshake) Use of Connection ID has been negotiated" \
-C "(initial handshake) Use of Connection ID has been negotiated" \
-c "(after renegotiation) Peer CID (length 2 Bytes): de ad" \
-s "(after renegotiation) Peer CID (length 2 Bytes): be ef" \
-c "(after renegotiation) Use of Connection ID has been negotiated" \
-s "(after renegotiation) Use of Connection ID has been negotiated"
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Connection ID, no packing: Cli+Srv enabled, CID on renegotiation" \
"$P_SRV debug_level=3 dtls=1 dgram_packing=0 cid=0 cid_renego=1 cid_val_renego=dead renegotiation=1" \
"$P_CLI debug_level=3 dtls=1 dgram_packing=0 cid=0 cid_renego=1 cid_val_renego=beef renegotiation=1 renegotiate=1" \
0 \
-S "(initial handshake) Use of Connection ID has been negotiated" \
-C "(initial handshake) Use of Connection ID has been negotiated" \
-c "(after renegotiation) Peer CID (length 2 Bytes): de ad" \
-s "(after renegotiation) Peer CID (length 2 Bytes): be ef" \
-c "(after renegotiation) Use of Connection ID has been negotiated" \
-s "(after renegotiation) Use of Connection ID has been negotiated"
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Connection ID, 3D+MTU: Cli+Srv enabled, CID on renegotiation" \
-p "$P_PXY mtu=800 drop=5 delay=5 duplicate=5 bad_cid=1" \
"$P_SRV debug_level=3 mtu=800 dtls=1 dgram_packing=1 cid=0 cid_renego=1 cid_val_renego=dead renegotiation=1" \
"$P_CLI debug_level=3 mtu=800 dtls=1 dgram_packing=1 cid=0 cid_renego=1 cid_val_renego=beef renegotiation=1 renegotiate=1" \
0 \
-S "(initial handshake) Use of Connection ID has been negotiated" \
-C "(initial handshake) Use of Connection ID has been negotiated" \
-c "(after renegotiation) Peer CID (length 2 Bytes): de ad" \
-s "(after renegotiation) Peer CID (length 2 Bytes): be ef" \
-c "(after renegotiation) Use of Connection ID has been negotiated" \
-s "(after renegotiation) Use of Connection ID has been negotiated" \
-c "ignoring unexpected CID" \
-s "ignoring unexpected CID"
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Connection ID: Cli+Srv enabled, Cli disables on renegotiation" \
"$P_SRV debug_level=3 dtls=1 cid=1 cid_val=dead renegotiation=1" \
"$P_CLI debug_level=3 dtls=1 cid=1 cid_val=beef cid_renego=0 renegotiation=1 renegotiate=1" \
0 \
-c "(initial handshake) Peer CID (length 2 Bytes): de ad" \
-s "(initial handshake) Peer CID (length 2 Bytes): be ef" \
-s "(initial handshake) Use of Connection ID has been negotiated" \
-c "(initial handshake) Use of Connection ID has been negotiated" \
-C "(after renegotiation) Peer CID (length 2 Bytes): de ad" \
-S "(after renegotiation) Peer CID (length 2 Bytes): be ef" \
-C "(after renegotiation) Use of Connection ID has been negotiated" \
-S "(after renegotiation) Use of Connection ID has been negotiated" \
-s "(after renegotiation) Use of Connection ID was not offered by client"
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Connection ID, 3D: Cli+Srv enabled, Cli disables on renegotiation" \
-p "$P_PXY drop=5 delay=5 duplicate=5 bad_cid=1" \
"$P_SRV debug_level=3 dtls=1 cid=1 cid_val=dead renegotiation=1" \
"$P_CLI debug_level=3 dtls=1 cid=1 cid_val=beef cid_renego=0 renegotiation=1 renegotiate=1" \
0 \
-c "(initial handshake) Peer CID (length 2 Bytes): de ad" \
-s "(initial handshake) Peer CID (length 2 Bytes): be ef" \
-s "(initial handshake) Use of Connection ID has been negotiated" \
-c "(initial handshake) Use of Connection ID has been negotiated" \
-C "(after renegotiation) Peer CID (length 2 Bytes): de ad" \
-S "(after renegotiation) Peer CID (length 2 Bytes): be ef" \
-C "(after renegotiation) Use of Connection ID has been negotiated" \
-S "(after renegotiation) Use of Connection ID has been negotiated" \
-s "(after renegotiation) Use of Connection ID was not offered by client" \
-c "ignoring unexpected CID" \
-s "ignoring unexpected CID"
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Connection ID: Cli+Srv enabled, Srv disables on renegotiation" \
"$P_SRV debug_level=3 dtls=1 cid=1 cid_val=dead cid_renego=0 renegotiation=1" \
"$P_CLI debug_level=3 dtls=1 cid=1 cid_val=beef renegotiation=1 renegotiate=1" \
0 \
-c "(initial handshake) Peer CID (length 2 Bytes): de ad" \
-s "(initial handshake) Peer CID (length 2 Bytes): be ef" \
-s "(initial handshake) Use of Connection ID has been negotiated" \
-c "(initial handshake) Use of Connection ID has been negotiated" \
-C "(after renegotiation) Peer CID (length 2 Bytes): de ad" \
-S "(after renegotiation) Peer CID (length 2 Bytes): be ef" \
-C "(after renegotiation) Use of Connection ID has been negotiated" \
-S "(after renegotiation) Use of Connection ID has been negotiated" \
-c "(after renegotiation) Use of Connection ID was rejected by the server"
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Connection ID, 3D: Cli+Srv enabled, Srv disables on renegotiation" \
-p "$P_PXY drop=5 delay=5 duplicate=5 bad_cid=1" \
"$P_SRV debug_level=3 dtls=1 cid=1 cid_val=dead cid_renego=0 renegotiation=1" \
"$P_CLI debug_level=3 dtls=1 cid=1 cid_val=beef renegotiation=1 renegotiate=1" \
0 \
-c "(initial handshake) Peer CID (length 2 Bytes): de ad" \
-s "(initial handshake) Peer CID (length 2 Bytes): be ef" \
-s "(initial handshake) Use of Connection ID has been negotiated" \
-c "(initial handshake) Use of Connection ID has been negotiated" \
-C "(after renegotiation) Peer CID (length 2 Bytes): de ad" \
-S "(after renegotiation) Peer CID (length 2 Bytes): be ef" \
-C "(after renegotiation) Use of Connection ID has been negotiated" \
-S "(after renegotiation) Use of Connection ID has been negotiated" \
-c "(after renegotiation) Use of Connection ID was rejected by the server" \
-c "ignoring unexpected CID" \
-s "ignoring unexpected CID"
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
requires_config_enabled MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH
run_test "Connection ID: Cli+Srv enabled, variable buffer lengths, MFL=512" \
"$P_SRV dtls=1 cid=1 cid_val=dead debug_level=2" \
"$P_CLI force_ciphersuite="TLS-ECDHE-ECDSA-WITH-AES-128-CCM-8" max_frag_len=512 dtls=1 cid=1 cid_val=beef" \
0 \
-c "(initial handshake) Peer CID (length 2 Bytes): de ad" \
-s "(initial handshake) Peer CID (length 2 Bytes): be ef" \
-s "(initial handshake) Use of Connection ID has been negotiated" \
-c "(initial handshake) Use of Connection ID has been negotiated" \
-s "Reallocating in_buf" \
-s "Reallocating out_buf"
requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
requires_config_enabled MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH
run_test "Connection ID: Cli+Srv enabled, variable buffer lengths, MFL=1024" \
"$P_SRV dtls=1 cid=1 cid_val=dead debug_level=2" \
"$P_CLI force_ciphersuite="TLS-ECDHE-ECDSA-WITH-AES-128-CCM-8" max_frag_len=1024 dtls=1 cid=1 cid_val=beef" \
0 \
-c "(initial handshake) Peer CID (length 2 Bytes): de ad" \
-s "(initial handshake) Peer CID (length 2 Bytes): be ef" \
-s "(initial handshake) Use of Connection ID has been negotiated" \
-c "(initial handshake) Use of Connection ID has been negotiated" \
-s "Reallocating in_buf" \
-s "Reallocating out_buf"
# Tests for Encrypt-then-MAC extension
run_test "Encrypt then MAC: default" \
"$P_SRV debug_level=3 \
force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
"$P_CLI debug_level=3" \
0 \
-c "client hello, adding encrypt_then_mac extension" \
-s "found encrypt then mac extension" \
-s "server hello, adding encrypt then mac extension" \
-c "found encrypt_then_mac extension" \
-c "using encrypt then mac" \
-s "using encrypt then mac"
run_test "Encrypt then MAC: client enabled, server disabled" \
"$P_SRV debug_level=3 etm=0 \
force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
"$P_CLI debug_level=3 etm=1" \
0 \
-c "client hello, adding encrypt_then_mac extension" \
-s "found encrypt then mac extension" \
-S "server hello, adding encrypt then mac extension" \
-C "found encrypt_then_mac extension" \
-C "using encrypt then mac" \
-S "using encrypt then mac"
run_test "Encrypt then MAC: client enabled, aead cipher" \
"$P_SRV debug_level=3 etm=1 \
force_ciphersuite=TLS-RSA-WITH-AES-128-GCM-SHA256" \
"$P_CLI debug_level=3 etm=1" \
0 \
-c "client hello, adding encrypt_then_mac extension" \
-s "found encrypt then mac extension" \
-S "server hello, adding encrypt then mac extension" \
-C "found encrypt_then_mac extension" \
-C "using encrypt then mac" \
-S "using encrypt then mac"
run_test "Encrypt then MAC: client enabled, stream cipher" \
"$P_SRV debug_level=3 etm=1 \
force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
"$P_CLI debug_level=3 etm=1 arc4=1 force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
0 \
-c "client hello, adding encrypt_then_mac extension" \
-s "found encrypt then mac extension" \
-S "server hello, adding encrypt then mac extension" \
-C "found encrypt_then_mac extension" \
-C "using encrypt then mac" \
-S "using encrypt then mac"
run_test "Encrypt then MAC: client disabled, server enabled" \
"$P_SRV debug_level=3 etm=1 \
force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
"$P_CLI debug_level=3 etm=0" \
0 \
-C "client hello, adding encrypt_then_mac extension" \
-S "found encrypt then mac extension" \
-S "server hello, adding encrypt then mac extension" \
-C "found encrypt_then_mac extension" \
-C "using encrypt then mac" \
-S "using encrypt then mac"
requires_config_enabled MBEDTLS_SSL_PROTO_SSL3
run_test "Encrypt then MAC: client SSLv3, server enabled" \
"$P_SRV debug_level=3 min_version=ssl3 \
force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
"$P_CLI debug_level=3 force_version=ssl3" \
0 \
-C "client hello, adding encrypt_then_mac extension" \
-S "found encrypt then mac extension" \
-S "server hello, adding encrypt then mac extension" \
-C "found encrypt_then_mac extension" \
-C "using encrypt then mac" \
-S "using encrypt then mac"
requires_config_enabled MBEDTLS_SSL_PROTO_SSL3
run_test "Encrypt then MAC: client enabled, server SSLv3" \
"$P_SRV debug_level=3 force_version=ssl3 \
force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
"$P_CLI debug_level=3 min_version=ssl3" \
0 \
-c "client hello, adding encrypt_then_mac extension" \
-S "found encrypt then mac extension" \
-S "server hello, adding encrypt then mac extension" \
-C "found encrypt_then_mac extension" \
-C "using encrypt then mac" \
-S "using encrypt then mac"
# Tests for Extended Master Secret extension
run_test "Extended Master Secret: default" \
"$P_SRV debug_level=3" \
"$P_CLI debug_level=3" \
0 \
-c "client hello, adding extended_master_secret extension" \
-s "found extended master secret extension" \
-s "server hello, adding extended master secret extension" \
-c "found extended_master_secret extension" \
-c "session hash for extended master secret" \
-s "session hash for extended master secret"
run_test "Extended Master Secret: client enabled, server disabled" \
"$P_SRV debug_level=3 extended_ms=0" \
"$P_CLI debug_level=3 extended_ms=1" \
0 \
-c "client hello, adding extended_master_secret extension" \
-s "found extended master secret extension" \
-S "server hello, adding extended master secret extension" \
-C "found extended_master_secret extension" \
-C "session hash for extended master secret" \
-S "session hash for extended master secret"
run_test "Extended Master Secret: client disabled, server enabled" \
"$P_SRV debug_level=3 extended_ms=1" \
"$P_CLI debug_level=3 extended_ms=0" \
0 \
-C "client hello, adding extended_master_secret extension" \
-S "found extended master secret extension" \
-S "server hello, adding extended master secret extension" \
-C "found extended_master_secret extension" \
-C "session hash for extended master secret" \
-S "session hash for extended master secret"
requires_config_enabled MBEDTLS_SSL_PROTO_SSL3
run_test "Extended Master Secret: client SSLv3, server enabled" \
"$P_SRV debug_level=3 min_version=ssl3" \
"$P_CLI debug_level=3 force_version=ssl3" \
0 \
-C "client hello, adding extended_master_secret extension" \
-S "found extended master secret extension" \
-S "server hello, adding extended master secret extension" \
-C "found extended_master_secret extension" \
-C "session hash for extended master secret" \
-S "session hash for extended master secret"
requires_config_enabled MBEDTLS_SSL_PROTO_SSL3
run_test "Extended Master Secret: client enabled, server SSLv3" \
"$P_SRV debug_level=3 force_version=ssl3" \
"$P_CLI debug_level=3 min_version=ssl3" \
0 \
-c "client hello, adding extended_master_secret extension" \
-S "found extended master secret extension" \
-S "server hello, adding extended master secret extension" \
-C "found extended_master_secret extension" \
-C "session hash for extended master secret" \
-S "session hash for extended master secret"
# Tests for FALLBACK_SCSV
run_test "Fallback SCSV: default" \
"$P_SRV debug_level=2" \
"$P_CLI debug_level=3 force_version=tls1_1" \
0 \
-C "adding FALLBACK_SCSV" \
-S "received FALLBACK_SCSV" \
-S "inapropriate fallback" \
-C "is a fatal alert message (msg 86)"
run_test "Fallback SCSV: explicitly disabled" \
"$P_SRV debug_level=2" \
"$P_CLI debug_level=3 force_version=tls1_1 fallback=0" \
0 \
-C "adding FALLBACK_SCSV" \
-S "received FALLBACK_SCSV" \
-S "inapropriate fallback" \
-C "is a fatal alert message (msg 86)"
run_test "Fallback SCSV: enabled" \
"$P_SRV debug_level=2" \
"$P_CLI debug_level=3 force_version=tls1_1 fallback=1" \
1 \
-c "adding FALLBACK_SCSV" \
-s "received FALLBACK_SCSV" \
-s "inapropriate fallback" \
-c "is a fatal alert message (msg 86)"
run_test "Fallback SCSV: enabled, max version" \
"$P_SRV debug_level=2" \
"$P_CLI debug_level=3 fallback=1" \
0 \
-c "adding FALLBACK_SCSV" \
-s "received FALLBACK_SCSV" \
-S "inapropriate fallback" \
-C "is a fatal alert message (msg 86)"
requires_openssl_with_fallback_scsv
run_test "Fallback SCSV: default, openssl server" \
"$O_SRV" \
"$P_CLI debug_level=3 force_version=tls1_1 fallback=0" \
0 \
-C "adding FALLBACK_SCSV" \
-C "is a fatal alert message (msg 86)"
requires_openssl_with_fallback_scsv
run_test "Fallback SCSV: enabled, openssl server" \
"$O_SRV" \
"$P_CLI debug_level=3 force_version=tls1_1 fallback=1" \
1 \
-c "adding FALLBACK_SCSV" \
-c "is a fatal alert message (msg 86)"
requires_openssl_with_fallback_scsv
run_test "Fallback SCSV: disabled, openssl client" \
"$P_SRV debug_level=2" \
"$O_CLI -tls1_1" \
0 \
-S "received FALLBACK_SCSV" \
-S "inapropriate fallback"
requires_openssl_with_fallback_scsv
run_test "Fallback SCSV: enabled, openssl client" \
"$P_SRV debug_level=2" \
"$O_CLI -tls1_1 -fallback_scsv" \
1 \
-s "received FALLBACK_SCSV" \
-s "inapropriate fallback"
requires_openssl_with_fallback_scsv
run_test "Fallback SCSV: enabled, max version, openssl client" \
"$P_SRV debug_level=2" \
"$O_CLI -fallback_scsv" \
0 \
-s "received FALLBACK_SCSV" \
-S "inapropriate fallback"
# Test sending and receiving empty application data records
run_test "Encrypt then MAC: empty application data record" \
"$P_SRV auth_mode=none debug_level=4 etm=1" \
"$P_CLI auth_mode=none etm=1 request_size=0 force_ciphersuite=TLS-ECDHE-RSA-WITH-AES-256-CBC-SHA" \
0 \
-S "0000: 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f" \
-s "dumping 'input payload after decrypt' (0 bytes)" \
-c "0 bytes written in 1 fragments"
run_test "Encrypt then MAC: disabled, empty application data record" \
"$P_SRV auth_mode=none debug_level=4 etm=0" \
"$P_CLI auth_mode=none etm=0 request_size=0" \
0 \
-s "dumping 'input payload after decrypt' (0 bytes)" \
-c "0 bytes written in 1 fragments"
run_test "Encrypt then MAC, DTLS: empty application data record" \
"$P_SRV auth_mode=none debug_level=4 etm=1 dtls=1" \
"$P_CLI auth_mode=none etm=1 request_size=0 force_ciphersuite=TLS-ECDHE-RSA-WITH-AES-256-CBC-SHA dtls=1" \
0 \
-S "0000: 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f" \
-s "dumping 'input payload after decrypt' (0 bytes)" \
-c "0 bytes written in 1 fragments"
run_test "Encrypt then MAC, DTLS: disabled, empty application data record" \
"$P_SRV auth_mode=none debug_level=4 etm=0 dtls=1" \
"$P_CLI auth_mode=none etm=0 request_size=0 dtls=1" \
0 \
-s "dumping 'input payload after decrypt' (0 bytes)" \
-c "0 bytes written in 1 fragments"
## ClientHello generated with
## "openssl s_client -CAfile tests/data_files/test-ca.crt -tls1_1 -connect localhost:4433 -cipher ..."
## then manually twiddling the ciphersuite list.
## The ClientHello content is spelled out below as a hex string as
## "prefix ciphersuite1 ciphersuite2 ciphersuite3 ciphersuite4 suffix".
## The expected response is an inappropriate_fallback alert.
requires_openssl_with_fallback_scsv
run_test "Fallback SCSV: beginning of list" \
"$P_SRV debug_level=2" \
"$TCP_CLIENT localhost $SRV_PORT '160301003e0100003a03022aafb94308dc22ca1086c65acc00e414384d76b61ecab37df1633b1ae1034dbe000008 5600 0031 0032 0033 0100000900230000000f000101' '15030200020256'" \
0 \
-s "received FALLBACK_SCSV" \
-s "inapropriate fallback"
requires_openssl_with_fallback_scsv
run_test "Fallback SCSV: end of list" \
"$P_SRV debug_level=2" \
"$TCP_CLIENT localhost $SRV_PORT '160301003e0100003a03022aafb94308dc22ca1086c65acc00e414384d76b61ecab37df1633b1ae1034dbe000008 0031 0032 0033 5600 0100000900230000000f000101' '15030200020256'" \
0 \
-s "received FALLBACK_SCSV" \
-s "inapropriate fallback"
## Here the expected response is a valid ServerHello prefix, up to the random.
requires_openssl_with_fallback_scsv
run_test "Fallback SCSV: not in list" \
"$P_SRV debug_level=2" \
"$TCP_CLIENT localhost $SRV_PORT '160301003e0100003a03022aafb94308dc22ca1086c65acc00e414384d76b61ecab37df1633b1ae1034dbe000008 0056 0031 0032 0033 0100000900230000000f000101' '16030200300200002c0302'" \
0 \
-S "received FALLBACK_SCSV" \
-S "inapropriate fallback"
# Tests for CBC 1/n-1 record splitting
run_test "CBC Record splitting: TLS 1.2, no splitting" \
"$P_SRV" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \
request_size=123 force_version=tls1_2" \
0 \
-s "Read from client: 123 bytes read" \
-S "Read from client: 1 bytes read" \
-S "122 bytes read"
run_test "CBC Record splitting: TLS 1.1, no splitting" \
"$P_SRV" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \
request_size=123 force_version=tls1_1" \
0 \
-s "Read from client: 123 bytes read" \
-S "Read from client: 1 bytes read" \
-S "122 bytes read"
run_test "CBC Record splitting: TLS 1.0, splitting" \
"$P_SRV" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \
request_size=123 force_version=tls1" \
0 \
-S "Read from client: 123 bytes read" \
-s "Read from client: 1 bytes read" \
-s "122 bytes read"
requires_config_enabled MBEDTLS_SSL_PROTO_SSL3
run_test "CBC Record splitting: SSLv3, splitting" \
"$P_SRV min_version=ssl3" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \
request_size=123 force_version=ssl3" \
0 \
-S "Read from client: 123 bytes read" \
-s "Read from client: 1 bytes read" \
-s "122 bytes read"
run_test "CBC Record splitting: TLS 1.0 RC4, no splitting" \
"$P_SRV arc4=1 force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \
request_size=123 force_version=tls1" \
0 \
-s "Read from client: 123 bytes read" \
-S "Read from client: 1 bytes read" \
-S "122 bytes read"
run_test "CBC Record splitting: TLS 1.0, splitting disabled" \
"$P_SRV" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \
request_size=123 force_version=tls1 recsplit=0" \
0 \
-s "Read from client: 123 bytes read" \
-S "Read from client: 1 bytes read" \
-S "122 bytes read"
run_test "CBC Record splitting: TLS 1.0, splitting, nbio" \
"$P_SRV nbio=2" \
"$P_CLI nbio=2 force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \
request_size=123 force_version=tls1" \
0 \
-S "Read from client: 123 bytes read" \
-s "Read from client: 1 bytes read" \
-s "122 bytes read"
# Tests for Session Tickets
run_test "Session resume using tickets: basic" \
"$P_SRV debug_level=3 tickets=1" \
"$P_CLI debug_level=3 tickets=1 reconnect=1" \
0 \
-c "client hello, adding session ticket extension" \
-s "found session ticket extension" \
-s "server hello, adding session ticket extension" \
-c "found session_ticket extension" \
-c "parse new session ticket" \
-S "session successfully restored from cache" \
-s "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
run_test "Session resume using tickets: cache disabled" \
"$P_SRV debug_level=3 tickets=1 cache_max=0" \
"$P_CLI debug_level=3 tickets=1 reconnect=1" \
0 \
-c "client hello, adding session ticket extension" \
-s "found session ticket extension" \
-s "server hello, adding session ticket extension" \
-c "found session_ticket extension" \
-c "parse new session ticket" \
-S "session successfully restored from cache" \
-s "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
run_test "Session resume using tickets: timeout" \
"$P_SRV debug_level=3 tickets=1 cache_max=0 ticket_timeout=1" \
"$P_CLI debug_level=3 tickets=1 reconnect=1 reco_delay=2" \
0 \
-c "client hello, adding session ticket extension" \
-s "found session ticket extension" \
-s "server hello, adding session ticket extension" \
-c "found session_ticket extension" \
-c "parse new session ticket" \
-S "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-S "a session has been resumed" \
-C "a session has been resumed"
run_test "Session resume using tickets: session copy" \
"$P_SRV debug_level=3 tickets=1 cache_max=0" \
"$P_CLI debug_level=3 tickets=1 reconnect=1 reco_mode=0" \
0 \
-c "client hello, adding session ticket extension" \
-s "found session ticket extension" \
-s "server hello, adding session ticket extension" \
-c "found session_ticket extension" \
-c "parse new session ticket" \
-S "session successfully restored from cache" \
-s "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
run_test "Session resume using tickets: openssl server" \
"$O_SRV" \
"$P_CLI debug_level=3 tickets=1 reconnect=1" \
0 \
-c "client hello, adding session ticket extension" \
-c "found session_ticket extension" \
-c "parse new session ticket" \
-c "a session has been resumed"
run_test "Session resume using tickets: openssl client" \
"$P_SRV debug_level=3 tickets=1" \
"( $O_CLI -sess_out $SESSION; \
$O_CLI -sess_in $SESSION; \
rm -f $SESSION )" \
0 \
-s "found session ticket extension" \
-s "server hello, adding session ticket extension" \
-S "session successfully restored from cache" \
-s "session successfully restored from ticket" \
-s "a session has been resumed"
# Tests for Session Tickets with DTLS
run_test "Session resume using tickets, DTLS: basic" \
"$P_SRV debug_level=3 dtls=1 tickets=1" \
"$P_CLI debug_level=3 dtls=1 tickets=1 reconnect=1 skip_close_notify=1" \
0 \
-c "client hello, adding session ticket extension" \
-s "found session ticket extension" \
-s "server hello, adding session ticket extension" \
-c "found session_ticket extension" \
-c "parse new session ticket" \
-S "session successfully restored from cache" \
-s "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
run_test "Session resume using tickets, DTLS: cache disabled" \
"$P_SRV debug_level=3 dtls=1 tickets=1 cache_max=0" \
"$P_CLI debug_level=3 dtls=1 tickets=1 reconnect=1 skip_close_notify=1" \
0 \
-c "client hello, adding session ticket extension" \
-s "found session ticket extension" \
-s "server hello, adding session ticket extension" \
-c "found session_ticket extension" \
-c "parse new session ticket" \
-S "session successfully restored from cache" \
-s "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
run_test "Session resume using tickets, DTLS: timeout" \
"$P_SRV debug_level=3 dtls=1 tickets=1 cache_max=0 ticket_timeout=1" \
"$P_CLI debug_level=3 dtls=1 tickets=1 reconnect=1 skip_close_notify=1 reco_delay=2" \
0 \
-c "client hello, adding session ticket extension" \
-s "found session ticket extension" \
-s "server hello, adding session ticket extension" \
-c "found session_ticket extension" \
-c "parse new session ticket" \
-S "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-S "a session has been resumed" \
-C "a session has been resumed"
run_test "Session resume using tickets, DTLS: session copy" \
"$P_SRV debug_level=3 dtls=1 tickets=1 cache_max=0" \
"$P_CLI debug_level=3 dtls=1 tickets=1 reconnect=1 skip_close_notify=1 reco_mode=0" \
0 \
-c "client hello, adding session ticket extension" \
-s "found session ticket extension" \
-s "server hello, adding session ticket extension" \
-c "found session_ticket extension" \
-c "parse new session ticket" \
-S "session successfully restored from cache" \
-s "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
run_test "Session resume using tickets, DTLS: openssl server" \
"$O_SRV -dtls1" \
"$P_CLI dtls=1 debug_level=3 tickets=1 reconnect=1" \
0 \
-c "client hello, adding session ticket extension" \
-c "found session_ticket extension" \
-c "parse new session ticket" \
-c "a session has been resumed"
run_test "Session resume using tickets, DTLS: openssl client" \
"$P_SRV dtls=1 debug_level=3 tickets=1" \
"( $O_CLI -dtls1 -sess_out $SESSION; \
$O_CLI -dtls1 -sess_in $SESSION; \
rm -f $SESSION )" \
0 \
-s "found session ticket extension" \
-s "server hello, adding session ticket extension" \
-S "session successfully restored from cache" \
-s "session successfully restored from ticket" \
-s "a session has been resumed"
# Tests for Session Resume based on session-ID and cache
run_test "Session resume using cache: tickets enabled on client" \
"$P_SRV debug_level=3 tickets=0" \
"$P_CLI debug_level=3 tickets=1 reconnect=1" \
0 \
-c "client hello, adding session ticket extension" \
-s "found session ticket extension" \
-S "server hello, adding session ticket extension" \
-C "found session_ticket extension" \
-C "parse new session ticket" \
-s "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
run_test "Session resume using cache: tickets enabled on server" \
"$P_SRV debug_level=3 tickets=1" \
"$P_CLI debug_level=3 tickets=0 reconnect=1" \
0 \
-C "client hello, adding session ticket extension" \
-S "found session ticket extension" \
-S "server hello, adding session ticket extension" \
-C "found session_ticket extension" \
-C "parse new session ticket" \
-s "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
run_test "Session resume using cache: cache_max=0" \
"$P_SRV debug_level=3 tickets=0 cache_max=0" \
"$P_CLI debug_level=3 tickets=0 reconnect=1" \
0 \
-S "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-S "a session has been resumed" \
-C "a session has been resumed"
run_test "Session resume using cache: cache_max=1" \
"$P_SRV debug_level=3 tickets=0 cache_max=1" \
"$P_CLI debug_level=3 tickets=0 reconnect=1" \
0 \
-s "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
run_test "Session resume using cache: timeout > delay" \
"$P_SRV debug_level=3 tickets=0" \
"$P_CLI debug_level=3 tickets=0 reconnect=1 reco_delay=0" \
0 \
-s "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
run_test "Session resume using cache: timeout < delay" \
"$P_SRV debug_level=3 tickets=0 cache_timeout=1" \
"$P_CLI debug_level=3 tickets=0 reconnect=1 reco_delay=2" \
0 \
-S "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-S "a session has been resumed" \
-C "a session has been resumed"
run_test "Session resume using cache: no timeout" \
"$P_SRV debug_level=3 tickets=0 cache_timeout=0" \
"$P_CLI debug_level=3 tickets=0 reconnect=1 reco_delay=2" \
0 \
-s "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
run_test "Session resume using cache: session copy" \
"$P_SRV debug_level=3 tickets=0" \
"$P_CLI debug_level=3 tickets=0 reconnect=1 reco_mode=0" \
0 \
-s "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
run_test "Session resume using cache: openssl client" \
"$P_SRV debug_level=3 tickets=0" \
"( $O_CLI -sess_out $SESSION; \
$O_CLI -sess_in $SESSION; \
rm -f $SESSION )" \
0 \
-s "found session ticket extension" \
-S "server hello, adding session ticket extension" \
-s "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-s "a session has been resumed"
run_test "Session resume using cache: openssl server" \
"$O_SRV" \
"$P_CLI debug_level=3 tickets=0 reconnect=1" \
0 \
-C "found session_ticket extension" \
-C "parse new session ticket" \
-c "a session has been resumed"
# Tests for Session Resume based on session-ID and cache, DTLS
run_test "Session resume using cache, DTLS: tickets enabled on client" \
"$P_SRV dtls=1 debug_level=3 tickets=0" \
"$P_CLI dtls=1 debug_level=3 tickets=1 reconnect=1 skip_close_notify=1" \
0 \
-c "client hello, adding session ticket extension" \
-s "found session ticket extension" \
-S "server hello, adding session ticket extension" \
-C "found session_ticket extension" \
-C "parse new session ticket" \
-s "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
run_test "Session resume using cache, DTLS: tickets enabled on server" \
"$P_SRV dtls=1 debug_level=3 tickets=1" \
"$P_CLI dtls=1 debug_level=3 tickets=0 reconnect=1 skip_close_notify=1" \
0 \
-C "client hello, adding session ticket extension" \
-S "found session ticket extension" \
-S "server hello, adding session ticket extension" \
-C "found session_ticket extension" \
-C "parse new session ticket" \
-s "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
run_test "Session resume using cache, DTLS: cache_max=0" \
"$P_SRV dtls=1 debug_level=3 tickets=0 cache_max=0" \
"$P_CLI dtls=1 debug_level=3 tickets=0 reconnect=1 skip_close_notify=1" \
0 \
-S "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-S "a session has been resumed" \
-C "a session has been resumed"
run_test "Session resume using cache, DTLS: cache_max=1" \
"$P_SRV dtls=1 debug_level=3 tickets=0 cache_max=1" \
"$P_CLI dtls=1 debug_level=3 tickets=0 reconnect=1 skip_close_notify=1" \
0 \
-s "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
run_test "Session resume using cache, DTLS: timeout > delay" \
"$P_SRV dtls=1 debug_level=3 tickets=0" \
"$P_CLI dtls=1 debug_level=3 tickets=0 reconnect=1 skip_close_notify=1 reco_delay=0" \
0 \
-s "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
run_test "Session resume using cache, DTLS: timeout < delay" \
"$P_SRV dtls=1 debug_level=3 tickets=0 cache_timeout=1" \
"$P_CLI dtls=1 debug_level=3 tickets=0 reconnect=1 skip_close_notify=1 reco_delay=2" \
0 \
-S "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-S "a session has been resumed" \
-C "a session has been resumed"
run_test "Session resume using cache, DTLS: no timeout" \
"$P_SRV dtls=1 debug_level=3 tickets=0 cache_timeout=0" \
"$P_CLI dtls=1 debug_level=3 tickets=0 reconnect=1 skip_close_notify=1 reco_delay=2" \
0 \
-s "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
run_test "Session resume using cache, DTLS: session copy" \
"$P_SRV dtls=1 debug_level=3 tickets=0" \
"$P_CLI dtls=1 debug_level=3 tickets=0 reconnect=1 skip_close_notify=1 reco_mode=0" \
0 \
-s "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
run_test "Session resume using cache, DTLS: openssl client" \
"$P_SRV dtls=1 debug_level=3 tickets=0" \
"( $O_CLI -dtls1 -sess_out $SESSION; \
$O_CLI -dtls1 -sess_in $SESSION; \
rm -f $SESSION )" \
0 \
-s "found session ticket extension" \
-S "server hello, adding session ticket extension" \
-s "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-s "a session has been resumed"
run_test "Session resume using cache, DTLS: openssl server" \
"$O_SRV -dtls1" \
"$P_CLI dtls=1 debug_level=3 tickets=0 reconnect=1" \
0 \
-C "found session_ticket extension" \
-C "parse new session ticket" \
-c "a session has been resumed"
# Tests for Max Fragment Length extension
if [ "$MAX_CONTENT_LEN" -lt "4096" ]; then
printf '%s defines MBEDTLS_SSL_MAX_CONTENT_LEN to be less than 4096. Fragment length tests will fail.\n' "${CONFIG_H}"
exit 1
fi
if [ $MAX_CONTENT_LEN -ne 16384 ]; then
echo "Using non-default maximum content length $MAX_CONTENT_LEN"
fi
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: enabled, default" \
"$P_SRV debug_level=3" \
"$P_CLI debug_level=3" \
0 \
-c "Maximum input fragment length is $MAX_CONTENT_LEN" \
-c "Maximum output fragment length is $MAX_CONTENT_LEN" \
-s "Maximum input fragment length is $MAX_CONTENT_LEN" \
-s "Maximum output fragment length is $MAX_CONTENT_LEN" \
-C "client hello, adding max_fragment_length extension" \
-S "found max fragment length extension" \
-S "server hello, max_fragment_length extension" \
-C "found max_fragment_length extension"
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: enabled, default, larger message" \
"$P_SRV debug_level=3" \
"$P_CLI debug_level=3 request_size=$(( $MAX_CONTENT_LEN + 1))" \
0 \
-c "Maximum input fragment length is $MAX_CONTENT_LEN" \
-c "Maximum output fragment length is $MAX_CONTENT_LEN" \
-s "Maximum input fragment length is $MAX_CONTENT_LEN" \
-s "Maximum output fragment length is $MAX_CONTENT_LEN" \
-C "client hello, adding max_fragment_length extension" \
-S "found max fragment length extension" \
-S "server hello, max_fragment_length extension" \
-C "found max_fragment_length extension" \
-c "$(( $MAX_CONTENT_LEN + 1)) bytes written in 2 fragments" \
-s "$MAX_CONTENT_LEN bytes read" \
-s "1 bytes read"
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length, DTLS: enabled, default, larger message" \
"$P_SRV debug_level=3 dtls=1" \
"$P_CLI debug_level=3 dtls=1 request_size=$(( $MAX_CONTENT_LEN + 1))" \
1 \
-c "Maximum input fragment length is $MAX_CONTENT_LEN" \
-c "Maximum output fragment length is $MAX_CONTENT_LEN" \
-s "Maximum input fragment length is $MAX_CONTENT_LEN" \
-s "Maximum output fragment length is $MAX_CONTENT_LEN" \
-C "client hello, adding max_fragment_length extension" \
-S "found max fragment length extension" \
-S "server hello, max_fragment_length extension" \
-C "found max_fragment_length extension" \
-c "fragment larger than.*maximum "
# Run some tests with MBEDTLS_SSL_MAX_FRAGMENT_LENGTH disabled
# (session fragment length will be 16384 regardless of mbedtls
# content length configuration.)
requires_config_disabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: disabled, larger message" \
"$P_SRV debug_level=3" \
"$P_CLI debug_level=3 request_size=$(( $MAX_CONTENT_LEN + 1))" \
0 \
-C "Maximum input fragment length is 16384" \
-C "Maximum output fragment length is 16384" \
-S "Maximum input fragment length is 16384" \
-S "Maximum output fragment length is 16384" \
-c "$(( $MAX_CONTENT_LEN + 1)) bytes written in 2 fragments" \
-s "$MAX_CONTENT_LEN bytes read" \
-s "1 bytes read"
requires_config_disabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length DTLS: disabled, larger message" \
"$P_SRV debug_level=3 dtls=1" \
"$P_CLI debug_level=3 dtls=1 request_size=$(( $MAX_CONTENT_LEN + 1))" \
1 \
-C "Maximum input fragment length is 16384" \
-C "Maximum output fragment length is 16384" \
-S "Maximum input fragment length is 16384" \
-S "Maximum output fragment length is 16384" \
-c "fragment larger than.*maximum "
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: used by client" \
"$P_SRV debug_level=3" \
"$P_CLI debug_level=3 max_frag_len=4096" \
0 \
-c "Maximum input fragment length is 4096" \
-c "Maximum output fragment length is 4096" \
-s "Maximum input fragment length is 4096" \
-s "Maximum output fragment length is 4096" \
-c "client hello, adding max_fragment_length extension" \
-s "found max fragment length extension" \
-s "server hello, max_fragment_length extension" \
-c "found max_fragment_length extension"
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: client 512, server 1024" \
"$P_SRV debug_level=3 max_frag_len=1024" \
"$P_CLI debug_level=3 max_frag_len=512" \
0 \
-c "Maximum input fragment length is 512" \
-c "Maximum output fragment length is 512" \
-s "Maximum input fragment length is 512" \
-s "Maximum output fragment length is 512" \
-c "client hello, adding max_fragment_length extension" \
-s "found max fragment length extension" \
-s "server hello, max_fragment_length extension" \
-c "found max_fragment_length extension"
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: client 512, server 2048" \
"$P_SRV debug_level=3 max_frag_len=2048" \
"$P_CLI debug_level=3 max_frag_len=512" \
0 \
-c "Maximum input fragment length is 512" \
-c "Maximum output fragment length is 512" \
-s "Maximum input fragment length is 512" \
-s "Maximum output fragment length is 512" \
-c "client hello, adding max_fragment_length extension" \
-s "found max fragment length extension" \
-s "server hello, max_fragment_length extension" \
-c "found max_fragment_length extension"
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: client 512, server 4096" \
"$P_SRV debug_level=3 max_frag_len=4096" \
"$P_CLI debug_level=3 max_frag_len=512" \
0 \
-c "Maximum input fragment length is 512" \
-c "Maximum output fragment length is 512" \
-s "Maximum input fragment length is 512" \
-s "Maximum output fragment length is 512" \
-c "client hello, adding max_fragment_length extension" \
-s "found max fragment length extension" \
-s "server hello, max_fragment_length extension" \
-c "found max_fragment_length extension"
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: client 1024, server 512" \
"$P_SRV debug_level=3 max_frag_len=512" \
"$P_CLI debug_level=3 max_frag_len=1024" \
0 \
-c "Maximum input fragment length is 1024" \
-c "Maximum output fragment length is 1024" \
-s "Maximum input fragment length is 1024" \
-s "Maximum output fragment length is 512" \
-c "client hello, adding max_fragment_length extension" \
-s "found max fragment length extension" \
-s "server hello, max_fragment_length extension" \
-c "found max_fragment_length extension"
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: client 1024, server 2048" \
"$P_SRV debug_level=3 max_frag_len=2048" \
"$P_CLI debug_level=3 max_frag_len=1024" \
0 \
-c "Maximum input fragment length is 1024" \
-c "Maximum output fragment length is 1024" \
-s "Maximum input fragment length is 1024" \
-s "Maximum output fragment length is 1024" \
-c "client hello, adding max_fragment_length extension" \
-s "found max fragment length extension" \
-s "server hello, max_fragment_length extension" \
-c "found max_fragment_length extension"
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: client 1024, server 4096" \
"$P_SRV debug_level=3 max_frag_len=4096" \
"$P_CLI debug_level=3 max_frag_len=1024" \
0 \
-c "Maximum input fragment length is 1024" \
-c "Maximum output fragment length is 1024" \
-s "Maximum input fragment length is 1024" \
-s "Maximum output fragment length is 1024" \
-c "client hello, adding max_fragment_length extension" \
-s "found max fragment length extension" \
-s "server hello, max_fragment_length extension" \
-c "found max_fragment_length extension"
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: client 2048, server 512" \
"$P_SRV debug_level=3 max_frag_len=512" \
"$P_CLI debug_level=3 max_frag_len=2048" \
0 \
-c "Maximum input fragment length is 2048" \
-c "Maximum output fragment length is 2048" \
-s "Maximum input fragment length is 2048" \
-s "Maximum output fragment length is 512" \
-c "client hello, adding max_fragment_length extension" \
-s "found max fragment length extension" \
-s "server hello, max_fragment_length extension" \
-c "found max_fragment_length extension"
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: client 2048, server 1024" \
"$P_SRV debug_level=3 max_frag_len=1024" \
"$P_CLI debug_level=3 max_frag_len=2048" \
0 \
-c "Maximum input fragment length is 2048" \
-c "Maximum output fragment length is 2048" \
-s "Maximum input fragment length is 2048" \
-s "Maximum output fragment length is 1024" \
-c "client hello, adding max_fragment_length extension" \
-s "found max fragment length extension" \
-s "server hello, max_fragment_length extension" \
-c "found max_fragment_length extension"
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: client 2048, server 4096" \
"$P_SRV debug_level=3 max_frag_len=4096" \
"$P_CLI debug_level=3 max_frag_len=2048" \
0 \
-c "Maximum input fragment length is 2048" \
-c "Maximum output fragment length is 2048" \
-s "Maximum input fragment length is 2048" \
-s "Maximum output fragment length is 2048" \
-c "client hello, adding max_fragment_length extension" \
-s "found max fragment length extension" \
-s "server hello, max_fragment_length extension" \
-c "found max_fragment_length extension"
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: client 4096, server 512" \
"$P_SRV debug_level=3 max_frag_len=512" \
"$P_CLI debug_level=3 max_frag_len=4096" \
0 \
-c "Maximum input fragment length is 4096" \
-c "Maximum output fragment length is 4096" \
-s "Maximum input fragment length is 4096" \
-s "Maximum output fragment length is 512" \
-c "client hello, adding max_fragment_length extension" \
-s "found max fragment length extension" \
-s "server hello, max_fragment_length extension" \
-c "found max_fragment_length extension"
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: client 4096, server 1024" \
"$P_SRV debug_level=3 max_frag_len=1024" \
"$P_CLI debug_level=3 max_frag_len=4096" \
0 \
-c "Maximum input fragment length is 4096" \
-c "Maximum output fragment length is 4096" \
-s "Maximum input fragment length is 4096" \
-s "Maximum output fragment length is 1024" \
-c "client hello, adding max_fragment_length extension" \
-s "found max fragment length extension" \
-s "server hello, max_fragment_length extension" \
-c "found max_fragment_length extension"
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: client 4096, server 2048" \
"$P_SRV debug_level=3 max_frag_len=2048" \
"$P_CLI debug_level=3 max_frag_len=4096" \
0 \
-c "Maximum input fragment length is 4096" \
-c "Maximum output fragment length is 4096" \
-s "Maximum input fragment length is 4096" \
-s "Maximum output fragment length is 2048" \
-c "client hello, adding max_fragment_length extension" \
-s "found max fragment length extension" \
-s "server hello, max_fragment_length extension" \
-c "found max_fragment_length extension"
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: used by server" \
"$P_SRV debug_level=3 max_frag_len=4096" \
"$P_CLI debug_level=3" \
0 \
-c "Maximum input fragment length is $MAX_CONTENT_LEN" \
-c "Maximum output fragment length is $MAX_CONTENT_LEN" \
-s "Maximum input fragment length is $MAX_CONTENT_LEN" \
-s "Maximum output fragment length is 4096" \
-C "client hello, adding max_fragment_length extension" \
-S "found max fragment length extension" \
-S "server hello, max_fragment_length extension" \
-C "found max_fragment_length extension"
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
requires_gnutls
run_test "Max fragment length: gnutls server" \
"$G_SRV" \
"$P_CLI debug_level=3 max_frag_len=4096" \
0 \
-c "Maximum input fragment length is 4096" \
-c "Maximum output fragment length is 4096" \
-c "client hello, adding max_fragment_length extension" \
-c "found max_fragment_length extension"
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: client, message just fits" \
"$P_SRV debug_level=3" \
"$P_CLI debug_level=3 max_frag_len=2048 request_size=2048" \
0 \
-c "Maximum input fragment length is 2048" \
-c "Maximum output fragment length is 2048" \
-s "Maximum input fragment length is 2048" \
-s "Maximum output fragment length is 2048" \
-c "client hello, adding max_fragment_length extension" \
-s "found max fragment length extension" \
-s "server hello, max_fragment_length extension" \
-c "found max_fragment_length extension" \
-c "2048 bytes written in 1 fragments" \
-s "2048 bytes read"
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: client, larger message" \
"$P_SRV debug_level=3" \
"$P_CLI debug_level=3 max_frag_len=2048 request_size=2345" \
0 \
-c "Maximum input fragment length is 2048" \
-c "Maximum output fragment length is 2048" \
-s "Maximum input fragment length is 2048" \
-s "Maximum output fragment length is 2048" \
-c "client hello, adding max_fragment_length extension" \
-s "found max fragment length extension" \
-s "server hello, max_fragment_length extension" \
-c "found max_fragment_length extension" \
-c "2345 bytes written in 2 fragments" \
-s "2048 bytes read" \
-s "297 bytes read"
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Max fragment length: DTLS client, larger message" \
"$P_SRV debug_level=3 dtls=1" \
"$P_CLI debug_level=3 dtls=1 max_frag_len=2048 request_size=2345" \
1 \
-c "Maximum input fragment length is 2048" \
-c "Maximum output fragment length is 2048" \
-s "Maximum input fragment length is 2048" \
-s "Maximum output fragment length is 2048" \
-c "client hello, adding max_fragment_length extension" \
-s "found max fragment length extension" \
-s "server hello, max_fragment_length extension" \
-c "found max_fragment_length extension" \
-c "fragment larger than.*maximum"
# Tests for renegotiation
# Renegotiation SCSV always added, regardless of SSL_RENEGOTIATION
run_test "Renegotiation: none, for reference" \
"$P_SRV debug_level=3 exchanges=2 auth_mode=optional" \
"$P_CLI debug_level=3 exchanges=2" \
0 \
-C "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-S "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-C "=> renegotiate" \
-S "=> renegotiate" \
-S "write hello request"
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Renegotiation: client-initiated" \
"$P_SRV debug_level=3 exchanges=2 renegotiation=1 auth_mode=optional" \
"$P_CLI debug_level=3 exchanges=2 renegotiation=1 renegotiate=1" \
0 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-s "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-s "=> renegotiate" \
-S "write hello request"
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Renegotiation: server-initiated" \
"$P_SRV debug_level=3 exchanges=2 renegotiation=1 auth_mode=optional renegotiate=1" \
"$P_CLI debug_level=3 exchanges=2 renegotiation=1" \
0 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-s "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-s "=> renegotiate" \
-s "write hello request"
# Checks that no Signature Algorithm with SHA-1 gets negotiated. Negotiating SHA-1 would mean that
# the server did not parse the Signature Algorithm extension. This test is valid only if an MD
# algorithm stronger than SHA-1 is enabled in config.h
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Renegotiation: Signature Algorithms parsing, client-initiated" \
"$P_SRV debug_level=3 exchanges=2 renegotiation=1 auth_mode=optional" \
"$P_CLI debug_level=3 exchanges=2 renegotiation=1 renegotiate=1" \
0 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-s "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-s "=> renegotiate" \
-S "write hello request" \
-S "client hello v3, signature_algorithm ext: 2" # Is SHA-1 negotiated?
# Checks that no Signature Algorithm with SHA-1 gets negotiated. Negotiating SHA-1 would mean that
# the server did not parse the Signature Algorithm extension. This test is valid only if an MD
# algorithm stronger than SHA-1 is enabled in config.h
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Renegotiation: Signature Algorithms parsing, server-initiated" \
"$P_SRV debug_level=3 exchanges=2 renegotiation=1 auth_mode=optional renegotiate=1" \
"$P_CLI debug_level=3 exchanges=2 renegotiation=1" \
0 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-s "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-s "=> renegotiate" \
-s "write hello request" \
-S "client hello v3, signature_algorithm ext: 2" # Is SHA-1 negotiated?
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Renegotiation: double" \
"$P_SRV debug_level=3 exchanges=2 renegotiation=1 auth_mode=optional renegotiate=1" \
"$P_CLI debug_level=3 exchanges=2 renegotiation=1 renegotiate=1" \
0 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-s "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-s "=> renegotiate" \
-s "write hello request"
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
run_test "Renegotiation with max fragment length: client 2048, server 512" \
"$P_SRV debug_level=3 exchanges=2 renegotiation=1 auth_mode=optional renegotiate=1 max_frag_len=512" \
"$P_CLI debug_level=3 exchanges=2 renegotiation=1 renegotiate=1 max_frag_len=2048 force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-CCM-8" \
0 \
-c "Maximum input fragment length is 2048" \
-c "Maximum output fragment length is 2048" \
-s "Maximum input fragment length is 2048" \
-s "Maximum output fragment length is 512" \
-c "client hello, adding max_fragment_length extension" \
-s "found max fragment length extension" \
-s "server hello, max_fragment_length extension" \
-c "found max_fragment_length extension" \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-s "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-s "=> renegotiate" \
-s "write hello request"
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Renegotiation: client-initiated, server-rejected" \
"$P_SRV debug_level=3 exchanges=2 renegotiation=0 auth_mode=optional" \
"$P_CLI debug_level=3 exchanges=2 renegotiation=1 renegotiate=1" \
1 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-S "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-S "=> renegotiate" \
-S "write hello request" \
-c "SSL - Unexpected message at ServerHello in renegotiation" \
-c "failed"
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Renegotiation: server-initiated, client-rejected, default" \
"$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1 auth_mode=optional" \
"$P_CLI debug_level=3 exchanges=2 renegotiation=0" \
0 \
-C "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-S "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-C "=> renegotiate" \
-S "=> renegotiate" \
-s "write hello request" \
-S "SSL - An unexpected message was received from our peer" \
-S "failed"
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Renegotiation: server-initiated, client-rejected, not enforced" \
"$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1 \
renego_delay=-1 auth_mode=optional" \
"$P_CLI debug_level=3 exchanges=2 renegotiation=0" \
0 \
-C "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-S "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-C "=> renegotiate" \
-S "=> renegotiate" \
-s "write hello request" \
-S "SSL - An unexpected message was received from our peer" \
-S "failed"
# delay 2 for 1 alert record + 1 application data record
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Renegotiation: server-initiated, client-rejected, delay 2" \
"$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1 \
renego_delay=2 auth_mode=optional" \
"$P_CLI debug_level=3 exchanges=2 renegotiation=0" \
0 \
-C "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-S "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-C "=> renegotiate" \
-S "=> renegotiate" \
-s "write hello request" \
-S "SSL - An unexpected message was received from our peer" \
-S "failed"
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Renegotiation: server-initiated, client-rejected, delay 0" \
"$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1 \
renego_delay=0 auth_mode=optional" \
"$P_CLI debug_level=3 exchanges=2 renegotiation=0" \
0 \
-C "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-S "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-C "=> renegotiate" \
-S "=> renegotiate" \
-s "write hello request" \
-s "SSL - An unexpected message was received from our peer"
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Renegotiation: server-initiated, client-accepted, delay 0" \
"$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1 \
renego_delay=0 auth_mode=optional" \
"$P_CLI debug_level=3 exchanges=2 renegotiation=1" \
0 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-s "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-s "=> renegotiate" \
-s "write hello request" \
-S "SSL - An unexpected message was received from our peer" \
-S "failed"
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Renegotiation: periodic, just below period" \
"$P_SRV debug_level=3 exchanges=9 renegotiation=1 renego_period=3 auth_mode=optional" \
"$P_CLI debug_level=3 exchanges=2 renegotiation=1" \
0 \
-C "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-S "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-S "record counter limit reached: renegotiate" \
-C "=> renegotiate" \
-S "=> renegotiate" \
-S "write hello request" \
-S "SSL - An unexpected message was received from our peer" \
-S "failed"
# one extra exchange to be able to complete renego
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Renegotiation: periodic, just above period" \
"$P_SRV debug_level=3 exchanges=9 renegotiation=1 renego_period=3 auth_mode=optional" \
"$P_CLI debug_level=3 exchanges=4 renegotiation=1" \
0 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-s "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-s "record counter limit reached: renegotiate" \
-c "=> renegotiate" \
-s "=> renegotiate" \
-s "write hello request" \
-S "SSL - An unexpected message was received from our peer" \
-S "failed"
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Renegotiation: periodic, two times period" \
"$P_SRV debug_level=3 exchanges=9 renegotiation=1 renego_period=3 auth_mode=optional" \
"$P_CLI debug_level=3 exchanges=7 renegotiation=1" \
0 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-s "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-s "record counter limit reached: renegotiate" \
-c "=> renegotiate" \
-s "=> renegotiate" \
-s "write hello request" \
-S "SSL - An unexpected message was received from our peer" \
-S "failed"
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Renegotiation: periodic, above period, disabled" \
"$P_SRV debug_level=3 exchanges=9 renegotiation=0 renego_period=3 auth_mode=optional" \
"$P_CLI debug_level=3 exchanges=4 renegotiation=1" \
0 \
-C "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-S "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-S "record counter limit reached: renegotiate" \
-C "=> renegotiate" \
-S "=> renegotiate" \
-S "write hello request" \
-S "SSL - An unexpected message was received from our peer" \
-S "failed"
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Renegotiation: nbio, client-initiated" \
"$P_SRV debug_level=3 nbio=2 exchanges=2 renegotiation=1 auth_mode=optional" \
"$P_CLI debug_level=3 nbio=2 exchanges=2 renegotiation=1 renegotiate=1" \
0 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-s "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-s "=> renegotiate" \
-S "write hello request"
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Renegotiation: nbio, server-initiated" \
"$P_SRV debug_level=3 nbio=2 exchanges=2 renegotiation=1 renegotiate=1 auth_mode=optional" \
"$P_CLI debug_level=3 nbio=2 exchanges=2 renegotiation=1" \
0 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-s "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-s "=> renegotiate" \
-s "write hello request"
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Renegotiation: openssl server, client-initiated" \
"$O_SRV -www" \
"$P_CLI debug_level=3 exchanges=1 renegotiation=1 renegotiate=1" \
0 \
-c "client hello, adding renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-C "ssl_hanshake() returned" \
-C "error" \
-c "HTTP/1.0 200 [Oo][Kk]"
requires_gnutls
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Renegotiation: gnutls server strict, client-initiated" \
"$G_SRV --priority=NORMAL:%SAFE_RENEGOTIATION" \
"$P_CLI debug_level=3 exchanges=1 renegotiation=1 renegotiate=1" \
0 \
-c "client hello, adding renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-C "ssl_hanshake() returned" \
-C "error" \
-c "HTTP/1.0 200 [Oo][Kk]"
requires_gnutls
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Renegotiation: gnutls server unsafe, client-initiated default" \
"$G_SRV --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \
"$P_CLI debug_level=3 exchanges=1 renegotiation=1 renegotiate=1" \
1 \
-c "client hello, adding renegotiation extension" \
-C "found renegotiation extension" \
-c "=> renegotiate" \
-c "mbedtls_ssl_handshake() returned" \
-c "error" \
-C "HTTP/1.0 200 [Oo][Kk]"
requires_gnutls
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Renegotiation: gnutls server unsafe, client-inititated no legacy" \
"$G_SRV --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \
"$P_CLI debug_level=3 exchanges=1 renegotiation=1 renegotiate=1 \
allow_legacy=0" \
1 \
-c "client hello, adding renegotiation extension" \
-C "found renegotiation extension" \
-c "=> renegotiate" \
-c "mbedtls_ssl_handshake() returned" \
-c "error" \
-C "HTTP/1.0 200 [Oo][Kk]"
requires_gnutls
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Renegotiation: gnutls server unsafe, client-inititated legacy" \
"$G_SRV --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \
"$P_CLI debug_level=3 exchanges=1 renegotiation=1 renegotiate=1 \
allow_legacy=1" \
0 \
-c "client hello, adding renegotiation extension" \
-C "found renegotiation extension" \
-c "=> renegotiate" \
-C "ssl_hanshake() returned" \
-C "error" \
-c "HTTP/1.0 200 [Oo][Kk]"
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Renegotiation: DTLS, client-initiated" \
"$P_SRV debug_level=3 dtls=1 exchanges=2 renegotiation=1" \
"$P_CLI debug_level=3 dtls=1 exchanges=2 renegotiation=1 renegotiate=1" \
0 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-s "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-s "=> renegotiate" \
-S "write hello request"
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Renegotiation: DTLS, server-initiated" \
"$P_SRV debug_level=3 dtls=1 exchanges=2 renegotiation=1 renegotiate=1" \
"$P_CLI debug_level=3 dtls=1 exchanges=2 renegotiation=1 \
read_timeout=1000 max_resend=2" \
0 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-s "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-s "=> renegotiate" \
-s "write hello request"
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Renegotiation: DTLS, renego_period overflow" \
"$P_SRV debug_level=3 dtls=1 exchanges=4 renegotiation=1 renego_period=18446462598732840962 auth_mode=optional" \
"$P_CLI debug_level=3 dtls=1 exchanges=4 renegotiation=1" \
0 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-s "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-s "record counter limit reached: renegotiate" \
-c "=> renegotiate" \
-s "=> renegotiate" \
-s "write hello request"
requires_gnutls
requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
run_test "Renegotiation: DTLS, gnutls server, client-initiated" \
"$G_SRV -u --mtu 4096" \
"$P_CLI debug_level=3 dtls=1 exchanges=1 renegotiation=1 renegotiate=1" \
0 \
-c "client hello, adding renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-C "mbedtls_ssl_handshake returned" \
-C "error" \
-s "Extra-header:"
# Test for the "secure renegotation" extension only (no actual renegotiation)
requires_gnutls
run_test "Renego ext: gnutls server strict, client default" \
"$G_SRV --priority=NORMAL:%SAFE_RENEGOTIATION" \
"$P_CLI debug_level=3" \
0 \
-c "found renegotiation extension" \
-C "error" \
-c "HTTP/1.0 200 [Oo][Kk]"
requires_gnutls
run_test "Renego ext: gnutls server unsafe, client default" \
"$G_SRV --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \
"$P_CLI debug_level=3" \
0 \
-C "found renegotiation extension" \
-C "error" \
-c "HTTP/1.0 200 [Oo][Kk]"
requires_gnutls
run_test "Renego ext: gnutls server unsafe, client break legacy" \
"$G_SRV --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \
"$P_CLI debug_level=3 allow_legacy=-1" \
1 \
-C "found renegotiation extension" \
-c "error" \
-C "HTTP/1.0 200 [Oo][Kk]"
requires_gnutls
run_test "Renego ext: gnutls client strict, server default" \
"$P_SRV debug_level=3" \
"$G_CLI --priority=NORMAL:%SAFE_RENEGOTIATION localhost" \
0 \
-s "received TLS_EMPTY_RENEGOTIATION_INFO\|found renegotiation extension" \
-s "server hello, secure renegotiation extension"
requires_gnutls
run_test "Renego ext: gnutls client unsafe, server default" \
"$P_SRV debug_level=3" \
"$G_CLI --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION localhost" \
0 \
-S "received TLS_EMPTY_RENEGOTIATION_INFO\|found renegotiation extension" \
-S "server hello, secure renegotiation extension"
requires_gnutls
run_test "Renego ext: gnutls client unsafe, server break legacy" \
"$P_SRV debug_level=3 allow_legacy=-1" \
"$G_CLI --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION localhost" \
1 \
-S "received TLS_EMPTY_RENEGOTIATION_INFO\|found renegotiation extension" \
-S "server hello, secure renegotiation extension"
# Tests for silently dropping trailing extra bytes in .der certificates
requires_gnutls
run_test "DER format: no trailing bytes" \
"$P_SRV crt_file=data_files/server5-der0.crt \
key_file=data_files/server5.key" \
"$G_CLI localhost" \
0 \
-c "Handshake was completed" \
requires_gnutls
run_test "DER format: with a trailing zero byte" \
"$P_SRV crt_file=data_files/server5-der1a.crt \
key_file=data_files/server5.key" \
"$G_CLI localhost" \
0 \
-c "Handshake was completed" \
requires_gnutls
run_test "DER format: with a trailing random byte" \
"$P_SRV crt_file=data_files/server5-der1b.crt \
key_file=data_files/server5.key" \
"$G_CLI localhost" \
0 \
-c "Handshake was completed" \
requires_gnutls
run_test "DER format: with 2 trailing random bytes" \
"$P_SRV crt_file=data_files/server5-der2.crt \
key_file=data_files/server5.key" \
"$G_CLI localhost" \
0 \
-c "Handshake was completed" \
requires_gnutls
run_test "DER format: with 4 trailing random bytes" \
"$P_SRV crt_file=data_files/server5-der4.crt \
key_file=data_files/server5.key" \
"$G_CLI localhost" \
0 \
-c "Handshake was completed" \
requires_gnutls
run_test "DER format: with 8 trailing random bytes" \
"$P_SRV crt_file=data_files/server5-der8.crt \
key_file=data_files/server5.key" \
"$G_CLI localhost" \
0 \
-c "Handshake was completed" \
requires_gnutls
run_test "DER format: with 9 trailing random bytes" \
"$P_SRV crt_file=data_files/server5-der9.crt \
key_file=data_files/server5.key" \
"$G_CLI localhost" \
0 \
-c "Handshake was completed" \
# Tests for auth_mode, there are duplicated tests using ca callback for authentication
# When updating these tests, modify the matching authentication tests accordingly
run_test "Authentication: server badcert, client required" \
"$P_SRV crt_file=data_files/server5-badsign.crt \
key_file=data_files/server5.key" \
"$P_CLI debug_level=1 auth_mode=required" \
1 \
-c "x509_verify_cert() returned" \
-c "! The certificate is not correctly signed by the trusted CA" \
-c "! mbedtls_ssl_handshake returned" \
-c "X509 - Certificate verification failed"
run_test "Authentication: server badcert, client optional" \
"$P_SRV crt_file=data_files/server5-badsign.crt \
key_file=data_files/server5.key" \
"$P_CLI debug_level=1 auth_mode=optional" \
0 \
-c "x509_verify_cert() returned" \
-c "! The certificate is not correctly signed by the trusted CA" \
-C "! mbedtls_ssl_handshake returned" \
-C "X509 - Certificate verification failed"
run_test "Authentication: server goodcert, client optional, no trusted CA" \
"$P_SRV" \
"$P_CLI debug_level=3 auth_mode=optional ca_file=none ca_path=none" \
0 \
-c "x509_verify_cert() returned" \
-c "! The certificate is not correctly signed by the trusted CA" \
-c "! Certificate verification flags"\
-C "! mbedtls_ssl_handshake returned" \
-C "X509 - Certificate verification failed" \
-C "SSL - No CA Chain is set, but required to operate"
run_test "Authentication: server goodcert, client required, no trusted CA" \
"$P_SRV" \
"$P_CLI debug_level=3 auth_mode=required ca_file=none ca_path=none" \
1 \
-c "x509_verify_cert() returned" \
-c "! The certificate is not correctly signed by the trusted CA" \
-c "! Certificate verification flags"\
-c "! mbedtls_ssl_handshake returned" \
-c "SSL - No CA Chain is set, but required to operate"
# The purpose of the next two tests is to test the client's behaviour when receiving a server
# certificate with an unsupported elliptic curve. This should usually not happen because
# the client informs the server about the supported curves - it does, though, in the
# corner case of a static ECDH suite, because the server doesn't check the curve on that
# occasion (to be fixed). If that bug's fixed, the test needs to be altered to use a
# different means to have the server ignoring the client's supported curve list.
requires_config_enabled MBEDTLS_ECP_C
run_test "Authentication: server ECDH p256v1, client required, p256v1 unsupported" \
"$P_SRV debug_level=1 key_file=data_files/server5.key \
crt_file=data_files/server5.ku-ka.crt" \
"$P_CLI debug_level=3 auth_mode=required curves=secp521r1" \
1 \
-c "bad certificate (EC key curve)"\
-c "! Certificate verification flags"\
-C "bad server certificate (ECDH curve)" # Expect failure at earlier verification stage
requires_config_enabled MBEDTLS_ECP_C
run_test "Authentication: server ECDH p256v1, client optional, p256v1 unsupported" \
"$P_SRV debug_level=1 key_file=data_files/server5.key \
crt_file=data_files/server5.ku-ka.crt" \
"$P_CLI debug_level=3 auth_mode=optional curves=secp521r1" \
1 \
-c "bad certificate (EC key curve)"\
-c "! Certificate verification flags"\
-c "bad server certificate (ECDH curve)" # Expect failure only at ECDH params check
run_test "Authentication: server badcert, client none" \
"$P_SRV crt_file=data_files/server5-badsign.crt \
key_file=data_files/server5.key" \
"$P_CLI debug_level=1 auth_mode=none" \
0 \
-C "x509_verify_cert() returned" \
-C "! The certificate is not correctly signed by the trusted CA" \
-C "! mbedtls_ssl_handshake returned" \
-C "X509 - Certificate verification failed"
run_test "Authentication: client SHA256, server required" \
"$P_SRV auth_mode=required" \
"$P_CLI debug_level=3 crt_file=data_files/server6.crt \
key_file=data_files/server6.key \
force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-256-GCM-SHA384" \
0 \