| /** |
| * \file config.h |
| * |
| * \brief Configuration options (set of defines) |
| * |
| * This set of compile-time options may be used to enable |
| * or disable features selectively, and reduce the global |
| * memory footprint. |
| * |
| * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved |
| * SPDX-License-Identifier: Apache-2.0 |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); you may |
| * not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| * This file is part of mbed TLS (https://tls.mbed.org) |
| */ |
| |
| #ifndef MBEDTLS_CONFIG_H |
| #define MBEDTLS_CONFIG_H |
| |
| #if defined(_MSC_VER) && !defined(_CRT_SECURE_NO_DEPRECATE) |
| #define _CRT_SECURE_NO_DEPRECATE 1 |
| #endif |
| |
| /** |
| * \name SECTION: System support |
| * |
| * This section sets system specific settings. |
| * \{ |
| */ |
| |
| /** |
| * \def MBEDTLS_HAVE_ASM |
| * |
| * The compiler has support for asm(). |
| * |
| * Requires support for asm() in compiler. |
| * |
| * Used in: |
| * library/timing.c |
| * library/padlock.c |
| * include/mbedtls/bn_mul.h |
| * |
| * Comment to disable the use of assembly code. |
| */ |
| #define MBEDTLS_HAVE_ASM |
| |
| /** |
| * \def MBEDTLS_HAVE_SSE2 |
| * |
| * CPU supports SSE2 instruction set. |
| * |
| * Uncomment if the CPU supports SSE2 (IA-32 specific). |
| */ |
| //#define MBEDTLS_HAVE_SSE2 |
| |
| /** |
| * \def MBEDTLS_HAVE_TIME |
| * |
| * System has time.h and time(). |
| * The time does not need to be correct, only time differences are used, |
| * by contrast with MBEDTLS_HAVE_TIME_DATE |
| * |
| * Comment if your system does not support time functions |
| */ |
| #define MBEDTLS_HAVE_TIME |
| |
| /** |
| * \def MBEDTLS_HAVE_TIME_DATE |
| * |
| * System has time.h and time(), gmtime() and the clock is correct. |
| * The time needs to be correct (not necesarily very accurate, but at least |
| * the date should be correct). This is used to verify the validity period of |
| * X.509 certificates. |
| * |
| * Comment if your system does not have a correct clock. |
| */ |
| #define MBEDTLS_HAVE_TIME_DATE |
| |
| /** |
| * \def MBEDTLS_PLATFORM_MEMORY |
| * |
| * Enable the memory allocation layer. |
| * |
| * By default mbed TLS uses the system-provided calloc() and free(). |
| * This allows different allocators (self-implemented or provided) to be |
| * provided to the platform abstraction layer. |
| * |
| * Enabling MBEDTLS_PLATFORM_MEMORY without the |
| * MBEDTLS_PLATFORM_{FREE,CALLOC}_MACROs will provide |
| * "mbedtls_platform_set_calloc_free()" allowing you to set an alternative calloc() and |
| * free() function pointer at runtime. |
| * |
| * Enabling MBEDTLS_PLATFORM_MEMORY and specifying |
| * MBEDTLS_PLATFORM_{CALLOC,FREE}_MACROs will allow you to specify the |
| * alternate function at compile time. |
| * |
| * Requires: MBEDTLS_PLATFORM_C |
| * |
| * Enable this layer to allow use of alternative memory allocators. |
| */ |
| //#define MBEDTLS_PLATFORM_MEMORY |
| |
| /** |
| * \def MBEDTLS_PLATFORM_NO_STD_FUNCTIONS |
| * |
| * Do not assign standard functions in the platform layer (e.g. calloc() to |
| * MBEDTLS_PLATFORM_STD_CALLOC and printf() to MBEDTLS_PLATFORM_STD_PRINTF) |
| * |
| * This makes sure there are no linking errors on platforms that do not support |
| * these functions. You will HAVE to provide alternatives, either at runtime |
| * via the platform_set_xxx() functions or at compile time by setting |
| * the MBEDTLS_PLATFORM_STD_XXX defines, or enabling a |
| * MBEDTLS_PLATFORM_XXX_MACRO. |
| * |
| * Requires: MBEDTLS_PLATFORM_C |
| * |
| * Uncomment to prevent default assignment of standard functions in the |
| * platform layer. |
| */ |
| //#define MBEDTLS_PLATFORM_NO_STD_FUNCTIONS |
| |
| /** |
| * \def MBEDTLS_PLATFORM_EXIT_ALT |
| * |
| * MBEDTLS_PLATFORM_XXX_ALT: Uncomment a macro to let mbed TLS support the |
| * function in the platform abstraction layer. |
| * |
| * Example: In case you uncomment MBEDTLS_PLATFORM_PRINTF_ALT, mbed TLS will |
| * provide a function "mbedtls_platform_set_printf()" that allows you to set an |
| * alternative printf function pointer. |
| * |
| * All these define require MBEDTLS_PLATFORM_C to be defined! |
| * |
| * \note MBEDTLS_PLATFORM_SNPRINTF_ALT is required on Windows; |
| * it will be enabled automatically by check_config.h |
| * |
| * \warning MBEDTLS_PLATFORM_XXX_ALT cannot be defined at the same time as |
| * MBEDTLS_PLATFORM_XXX_MACRO! |
| * |
| * Uncomment a macro to enable alternate implementation of specific base |
| * platform function |
| */ |
| //#define MBEDTLS_PLATFORM_EXIT_ALT |
| //#define MBEDTLS_PLATFORM_FPRINTF_ALT |
| //#define MBEDTLS_PLATFORM_PRINTF_ALT |
| //#define MBEDTLS_PLATFORM_SNPRINTF_ALT |
| |
| /** |
| * \def MBEDTLS_DEPRECATED_WARNING |
| * |
| * Mark deprecated functions so that they generate a warning if used. |
| * Functions deprecated in one version will usually be removed in the next |
| * version. You can enable this to help you prepare the transition to a new |
| * major version by making sure your code is not using these functions. |
| * |
| * This only works with GCC and Clang. With other compilers, you may want to |
| * use MBEDTLS_DEPRECATED_REMOVED |
| * |
| * Uncomment to get warnings on using deprecated functions. |
| */ |
| //#define MBEDTLS_DEPRECATED_WARNING |
| |
| /** |
| * \def MBEDTLS_DEPRECATED_REMOVED |
| * |
| * Remove deprecated functions so that they generate an error if used. |
| * Functions deprecated in one version will usually be removed in the next |
| * version. You can enable this to help you prepare the transition to a new |
| * major version by making sure your code is not using these functions. |
| * |
| * Uncomment to get errors on using deprecated functions. |
| */ |
| //#define MBEDTLS_DEPRECATED_REMOVED |
| |
| /* \} name SECTION: System support */ |
| |
| /** |
| * \name SECTION: mbed TLS feature support |
| * |
| * This section sets support for features that are or are not needed |
| * within the modules that are enabled. |
| * \{ |
| */ |
| |
| /** |
| * \def MBEDTLS_TIMING_ALT |
| * |
| * Uncomment to provide your own alternate implementation for mbedtls_timing_hardclock(), |
| * mbedtls_timing_get_timer(), mbedtls_set_alarm(), mbedtls_set/get_delay() |
| * |
| * Only works if you have MBEDTLS_TIMING_C enabled. |
| * |
| * You will need to provide a header "timing_alt.h" and an implementation at |
| * compile time. |
| */ |
| //#define MBEDTLS_TIMING_ALT |
| |
| /** |
| * \def MBEDTLS_AES_ALT |
| * |
| * MBEDTLS__MODULE_NAME__ALT: Uncomment a macro to let mbed TLS use your |
| * alternate core implementation of a symmetric crypto or hash module (e.g. |
| * platform specific assembly optimized implementations). Keep in mind that |
| * the function prototypes should remain the same. |
| * |
| * This replaces the whole module. If you only want to replace one of the |
| * functions, use one of the MBEDTLS__FUNCTION_NAME__ALT flags. |
| * |
| * Example: In case you uncomment MBEDTLS_AES_ALT, mbed TLS will no longer |
| * provide the "struct mbedtls_aes_context" definition and omit the base function |
| * declarations and implementations. "aes_alt.h" will be included from |
| * "aes.h" to include the new function definitions. |
| * |
| * Uncomment a macro to enable alternate implementation of the corresponding |
| * module. |
| */ |
| //#define MBEDTLS_AES_ALT |
| //#define MBEDTLS_ARC4_ALT |
| //#define MBEDTLS_BLOWFISH_ALT |
| //#define MBEDTLS_CAMELLIA_ALT |
| //#define MBEDTLS_DES_ALT |
| //#define MBEDTLS_XTEA_ALT |
| //#define MBEDTLS_MD2_ALT |
| //#define MBEDTLS_MD4_ALT |
| //#define MBEDTLS_MD5_ALT |
| //#define MBEDTLS_RIPEMD160_ALT |
| //#define MBEDTLS_SHA1_ALT |
| //#define MBEDTLS_SHA256_ALT |
| //#define MBEDTLS_SHA512_ALT |
| |
| /** |
| * \def MBEDTLS_MD2_PROCESS_ALT |
| * |
| * MBEDTLS__FUNCTION_NAME__ALT: Uncomment a macro to let mbed TLS use you |
| * alternate core implementation of symmetric crypto or hash function. Keep in |
| * mind that function prototypes should remain the same. |
| * |
| * This replaces only one function. The header file from mbed TLS is still |
| * used, in contrast to the MBEDTLS__MODULE_NAME__ALT flags. |
| * |
| * Example: In case you uncomment MBEDTLS_SHA256_PROCESS_ALT, mbed TLS will |
| * no longer provide the mbedtls_sha1_process() function, but it will still provide |
| * the other function (using your mbedtls_sha1_process() function) and the definition |
| * of mbedtls_sha1_context, so your implementation of mbedtls_sha1_process must be compatible |
| * with this definition. |
| * |
| * Note: if you use the AES_xxx_ALT macros, then is is recommended to also set |
| * MBEDTLS_AES_ROM_TABLES in order to help the linker garbage-collect the AES |
| * tables. |
| * |
| * Uncomment a macro to enable alternate implementation of the corresponding |
| * function. |
| */ |
| //#define MBEDTLS_MD2_PROCESS_ALT |
| //#define MBEDTLS_MD4_PROCESS_ALT |
| //#define MBEDTLS_MD5_PROCESS_ALT |
| //#define MBEDTLS_RIPEMD160_PROCESS_ALT |
| //#define MBEDTLS_SHA1_PROCESS_ALT |
| //#define MBEDTLS_SHA256_PROCESS_ALT |
| //#define MBEDTLS_SHA512_PROCESS_ALT |
| //#define MBEDTLS_DES_SETKEY_ALT |
| //#define MBEDTLS_DES_CRYPT_ECB_ALT |
| //#define MBEDTLS_DES3_CRYPT_ECB_ALT |
| //#define MBEDTLS_AES_SETKEY_ENC_ALT |
| //#define MBEDTLS_AES_SETKEY_DEC_ALT |
| //#define MBEDTLS_AES_ENCRYPT_ALT |
| //#define MBEDTLS_AES_DECRYPT_ALT |
| |
| /** |
| * \def MBEDTLS_ENTROPY_HARDWARE_ALT |
| * |
| * Uncomment this macro to let mbed TLS use your own implementation of a |
| * hardware entropy collector. |
| * |
| * Your function must be called \c mbedtls_hardware_poll(), have the same |
| * prototype as declared in entropy_poll.h, and accept NULL as first argument. |
| * |
| * Uncomment to use your own hardware entropy collector. |
| */ |
| //#define MBEDTLS_ENTROPY_HARDWARE_ALT |
| |
| /** |
| * \def MBEDTLS_AES_ROM_TABLES |
| * |
| * Store the AES tables in ROM. |
| * |
| * Uncomment this macro to store the AES tables in ROM. |
| */ |
| //#define MBEDTLS_AES_ROM_TABLES |
| |
| /** |
| * \def MBEDTLS_CAMELLIA_SMALL_MEMORY |
| * |
| * Use less ROM for the Camellia implementation (saves about 768 bytes). |
| * |
| * Uncomment this macro to use less memory for Camellia. |
| */ |
| //#define MBEDTLS_CAMELLIA_SMALL_MEMORY |
| |
| /** |
| * \def MBEDTLS_CIPHER_MODE_CBC |
| * |
| * Enable Cipher Block Chaining mode (CBC) for symmetric ciphers. |
| */ |
| #define MBEDTLS_CIPHER_MODE_CBC |
| |
| /** |
| * \def MBEDTLS_CIPHER_MODE_CFB |
| * |
| * Enable Cipher Feedback mode (CFB) for symmetric ciphers. |
| */ |
| #define MBEDTLS_CIPHER_MODE_CFB |
| |
| /** |
| * \def MBEDTLS_CIPHER_MODE_CTR |
| * |
| * Enable Counter Block Cipher mode (CTR) for symmetric ciphers. |
| */ |
| #define MBEDTLS_CIPHER_MODE_CTR |
| |
| /** |
| * \def MBEDTLS_CIPHER_NULL_CIPHER |
| * |
| * Enable NULL cipher. |
| * Warning: Only do so when you know what you are doing. This allows for |
| * encryption or channels without any security! |
| * |
| * Requires MBEDTLS_ENABLE_WEAK_CIPHERSUITES as well to enable |
| * the following ciphersuites: |
| * MBEDTLS_TLS_ECDH_ECDSA_WITH_NULL_SHA |
| * MBEDTLS_TLS_ECDH_RSA_WITH_NULL_SHA |
| * MBEDTLS_TLS_ECDHE_ECDSA_WITH_NULL_SHA |
| * MBEDTLS_TLS_ECDHE_RSA_WITH_NULL_SHA |
| * MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA384 |
| * MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA256 |
| * MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA |
| * MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA384 |
| * MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA256 |
| * MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA |
| * MBEDTLS_TLS_RSA_WITH_NULL_SHA256 |
| * MBEDTLS_TLS_RSA_WITH_NULL_SHA |
| * MBEDTLS_TLS_RSA_WITH_NULL_MD5 |
| * MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA384 |
| * MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA256 |
| * MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA |
| * MBEDTLS_TLS_PSK_WITH_NULL_SHA384 |
| * MBEDTLS_TLS_PSK_WITH_NULL_SHA256 |
| * MBEDTLS_TLS_PSK_WITH_NULL_SHA |
| * |
| * Uncomment this macro to enable the NULL cipher and ciphersuites |
| */ |
| //#define MBEDTLS_CIPHER_NULL_CIPHER |
| |
| /** |
| * \def MBEDTLS_CIPHER_PADDING_PKCS7 |
| * |
| * MBEDTLS_CIPHER_PADDING_XXX: Uncomment or comment macros to add support for |
| * specific padding modes in the cipher layer with cipher modes that support |
| * padding (e.g. CBC) |
| * |
| * If you disable all padding modes, only full blocks can be used with CBC. |
| * |
| * Enable padding modes in the cipher layer. |
| */ |
| #define MBEDTLS_CIPHER_PADDING_PKCS7 |
| #define MBEDTLS_CIPHER_PADDING_ONE_AND_ZEROS |
| #define MBEDTLS_CIPHER_PADDING_ZEROS_AND_LEN |
| #define MBEDTLS_CIPHER_PADDING_ZEROS |
| |
| /** |
| * \def MBEDTLS_ENABLE_WEAK_CIPHERSUITES |
| * |
| * Enable weak ciphersuites in SSL / TLS. |
| * Warning: Only do so when you know what you are doing. This allows for |
| * channels with virtually no security at all! |
| * |
| * This enables the following ciphersuites: |
| * MBEDTLS_TLS_RSA_WITH_DES_CBC_SHA |
| * MBEDTLS_TLS_DHE_RSA_WITH_DES_CBC_SHA |
| * |
| * Uncomment this macro to enable weak ciphersuites |
| */ |
| //#define MBEDTLS_ENABLE_WEAK_CIPHERSUITES |
| |
| /** |
| * \def MBEDTLS_REMOVE_ARC4_CIPHERSUITES |
| * |
| * Remove RC4 ciphersuites by default in SSL / TLS. |
| * This flag removes the ciphersuites based on RC4 from the default list as |
| * returned by mbedtls_ssl_list_ciphersuites(). However, it is still possible to |
| * enable (some of) them with mbedtls_ssl_conf_ciphersuites() by including them |
| * explicitly. |
| * |
| * Uncomment this macro to remove RC4 ciphersuites by default. |
| */ |
| #define MBEDTLS_REMOVE_ARC4_CIPHERSUITES |
| |
| /** |
| * \def MBEDTLS_ECP_DP_SECP192R1_ENABLED |
| * |
| * MBEDTLS_ECP_XXXX_ENABLED: Enables specific curves within the Elliptic Curve |
| * module. By default all supported curves are enabled. |
| * |
| * Comment macros to disable the curve and functions for it |
| */ |
| #define MBEDTLS_ECP_DP_SECP192R1_ENABLED |
| #define MBEDTLS_ECP_DP_SECP224R1_ENABLED |
| #define MBEDTLS_ECP_DP_SECP256R1_ENABLED |
| #define MBEDTLS_ECP_DP_SECP384R1_ENABLED |
| #define MBEDTLS_ECP_DP_SECP521R1_ENABLED |
| #define MBEDTLS_ECP_DP_SECP192K1_ENABLED |
| #define MBEDTLS_ECP_DP_SECP224K1_ENABLED |
| #define MBEDTLS_ECP_DP_SECP256K1_ENABLED |
| #define MBEDTLS_ECP_DP_BP256R1_ENABLED |
| #define MBEDTLS_ECP_DP_BP384R1_ENABLED |
| #define MBEDTLS_ECP_DP_BP512R1_ENABLED |
| #define MBEDTLS_ECP_DP_CURVE25519_ENABLED |
| |
| /** |
| * \def MBEDTLS_ECP_NIST_OPTIM |
| * |
| * Enable specific 'modulo p' routines for each NIST prime. |
| * Depending on the prime and architecture, makes operations 4 to 8 times |
| * faster on the corresponding curve. |
| * |
| * Comment this macro to disable NIST curves optimisation. |
| */ |
| #define MBEDTLS_ECP_NIST_OPTIM |
| |
| /** |
| * \def MBEDTLS_ECDSA_DETERMINISTIC |
| * |
| * Enable deterministic ECDSA (RFC 6979). |
| * Standard ECDSA is "fragile" in the sense that lack of entropy when signing |
| * may result in a compromise of the long-term signing key. This is avoided by |
| * the deterministic variant. |
| * |
| * Requires: MBEDTLS_HMAC_DRBG_C |
| * |
| * Comment this macro to disable deterministic ECDSA. |
| */ |
| #define MBEDTLS_ECDSA_DETERMINISTIC |
| |
| /** |
| * \def MBEDTLS_KEY_EXCHANGE_PSK_ENABLED |
| * |
| * Enable the PSK based ciphersuite modes in SSL / TLS. |
| * |
| * This enables the following ciphersuites (if other requisites are |
| * enabled as well): |
| * MBEDTLS_TLS_PSK_WITH_AES_256_GCM_SHA384 |
| * MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA384 |
| * MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA |
| * MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384 |
| * MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384 |
| * MBEDTLS_TLS_PSK_WITH_AES_128_GCM_SHA256 |
| * MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA256 |
| * MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA |
| * MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256 |
| * MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256 |
| * MBEDTLS_TLS_PSK_WITH_3DES_EDE_CBC_SHA |
| * MBEDTLS_TLS_PSK_WITH_RC4_128_SHA |
| */ |
| #define MBEDTLS_KEY_EXCHANGE_PSK_ENABLED |
| |
| /** |
| * \def MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED |
| * |
| * Enable the DHE-PSK based ciphersuite modes in SSL / TLS. |
| * |
| * Requires: MBEDTLS_DHM_C |
| * |
| * This enables the following ciphersuites (if other requisites are |
| * enabled as well): |
| * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_GCM_SHA384 |
| * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA384 |
| * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA |
| * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384 |
| * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 |
| * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_GCM_SHA256 |
| * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA256 |
| * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA |
| * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256 |
| * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 |
| * MBEDTLS_TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA |
| * MBEDTLS_TLS_DHE_PSK_WITH_RC4_128_SHA |
| */ |
| #define MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED |
| |
| /** |
| * \def MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED |
| * |
| * Enable the ECDHE-PSK based ciphersuite modes in SSL / TLS. |
| * |
| * Requires: MBEDTLS_ECDH_C |
| * |
| * This enables the following ciphersuites (if other requisites are |
| * enabled as well): |
| * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384 |
| * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA |
| * MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 |
| * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256 |
| * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA |
| * MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 |
| * MBEDTLS_TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA |
| * MBEDTLS_TLS_ECDHE_PSK_WITH_RC4_128_SHA |
| */ |
| #define MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED |
| |
| /** |
| * \def MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED |
| * |
| * Enable the RSA-PSK based ciphersuite modes in SSL / TLS. |
| * |
| * Requires: MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15, |
| * MBEDTLS_X509_CRT_PARSE_C |
| * |
| * This enables the following ciphersuites (if other requisites are |
| * enabled as well): |
| * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_GCM_SHA384 |
| * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA384 |
| * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA |
| * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384 |
| * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384 |
| * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_GCM_SHA256 |
| * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA256 |
| * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA |
| * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256 |
| * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256 |
| * MBEDTLS_TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA |
| * MBEDTLS_TLS_RSA_PSK_WITH_RC4_128_SHA |
| */ |
| #define MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED |
| |
| /** |
| * \def MBEDTLS_KEY_EXCHANGE_RSA_ENABLED |
| * |
| * Enable the RSA-only based ciphersuite modes in SSL / TLS. |
| * |
| * Requires: MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15, |
| * MBEDTLS_X509_CRT_PARSE_C |
| * |
| * This enables the following ciphersuites (if other requisites are |
| * enabled as well): |
| * MBEDTLS_TLS_RSA_WITH_AES_256_GCM_SHA384 |
| * MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA256 |
| * MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA |
| * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384 |
| * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256 |
| * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA |
| * MBEDTLS_TLS_RSA_WITH_AES_128_GCM_SHA256 |
| * MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA256 |
| * MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA |
| * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256 |
| * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256 |
| * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA |
| * MBEDTLS_TLS_RSA_WITH_3DES_EDE_CBC_SHA |
| * MBEDTLS_TLS_RSA_WITH_RC4_128_SHA |
| * MBEDTLS_TLS_RSA_WITH_RC4_128_MD5 |
| */ |
| #define MBEDTLS_KEY_EXCHANGE_RSA_ENABLED |
| |
| /** |
| * \def MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED |
| * |
| * Enable the DHE-RSA based ciphersuite modes in SSL / TLS. |
| * |
| * Requires: MBEDTLS_DHM_C, MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15, |
| * MBEDTLS_X509_CRT_PARSE_C |
| * |
| * This enables the following ciphersuites (if other requisites are |
| * enabled as well): |
| * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 |
| * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA256 |
| * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA |
| * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 |
| * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256 |
| * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA |
| * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 |
| * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 |
| * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA |
| * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 |
| * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 |
| * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA |
| * MBEDTLS_TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA |
| */ |
| #define MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED |
| |
| /** |
| * \def MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED |
| * |
| * Enable the ECDHE-RSA based ciphersuite modes in SSL / TLS. |
| * |
| * Requires: MBEDTLS_ECDH_C, MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15, |
| * MBEDTLS_X509_CRT_PARSE_C |
| * |
| * This enables the following ciphersuites (if other requisites are |
| * enabled as well): |
| * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 |
| * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384 |
| * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA |
| * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 |
| * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384 |
| * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 |
| * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 |
| * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA |
| * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 |
| * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 |
| * MBEDTLS_TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA |
| * MBEDTLS_TLS_ECDHE_RSA_WITH_RC4_128_SHA |
| */ |
| #define MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED |
| |
| /** |
| * \def MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED |
| * |
| * Enable the ECDHE-ECDSA based ciphersuite modes in SSL / TLS. |
| * |
| * Requires: MBEDTLS_ECDH_C, MBEDTLS_ECDSA_C, MBEDTLS_X509_CRT_PARSE_C, |
| * |
| * This enables the following ciphersuites (if other requisites are |
| * enabled as well): |
| * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 |
| * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384 |
| * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA |
| * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 |
| * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 |
| * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 |
| * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 |
| * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA |
| * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 |
| * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 |
| * MBEDTLS_TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA |
| * MBEDTLS_TLS_ECDHE_ECDSA_WITH_RC4_128_SHA |
| */ |
| #define MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED |
| |
| /** |
| * \def MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED |
| * |
| * Enable the ECDH-ECDSA based ciphersuite modes in SSL / TLS. |
| * |
| * Requires: MBEDTLS_ECDH_C, MBEDTLS_X509_CRT_PARSE_C |
| * |
| * This enables the following ciphersuites (if other requisites are |
| * enabled as well): |
| * MBEDTLS_TLS_ECDH_ECDSA_WITH_RC4_128_SHA |
| * MBEDTLS_TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA |
| * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA |
| * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA |
| * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256 |
| * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384 |
| * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256 |
| * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384 |
| * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 |
| * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 |
| * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 |
| * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 |
| */ |
| #define MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED |
| |
| /** |
| * \def MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED |
| * |
| * Enable the ECDH-RSA based ciphersuite modes in SSL / TLS. |
| * |
| * Requires: MBEDTLS_ECDH_C, MBEDTLS_X509_CRT_PARSE_C |
| * |
| * This enables the following ciphersuites (if other requisites are |
| * enabled as well): |
| * MBEDTLS_TLS_ECDH_RSA_WITH_RC4_128_SHA |
| * MBEDTLS_TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA |
| * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA |
| * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA |
| * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256 |
| * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384 |
| * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256 |
| * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384 |
| * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256 |
| * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384 |
| * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256 |
| * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384 |
| */ |
| #define MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED |
| |
| /** |
| * \def MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED |
| * |
| * Enable the ECJPAKE based ciphersuite modes in SSL / TLS. |
| * |
| * \warning This is currently experimental. EC J-PAKE support is based on the |
| * Thread v1.0.0 specification; incompatible changes to the specification |
| * might still happen. For this reason, this is disabled by default. |
| * |
| * Requires: MBEDTLS_ECJPAKE_C |
| * MBEDTLS_SHA256_C |
| * MBEDTLS_ECP_DP_SECP256R1_ENABLED |
| * |
| * This enables the following ciphersuites (if other requisites are |
| * enabled as well): |
| * MBEDTLS_TLS_ECJPAKE_WITH_AES_128_CCM_8 |
| */ |
| //#define MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED |
| |
| /** |
| * \def MBEDTLS_PK_PARSE_EC_EXTENDED |
| * |
| * Enhance support for reading EC keys using variants of SEC1 not allowed by |
| * RFC 5915 and RFC 5480. |
| * |
| * Currently this means parsing the SpecifiedECDomain choice of EC |
| * parameters (only known groups are supported, not arbitrary domains, to |
| * avoid validation issues). |
| * |
| * Disable if you only need to support RFC 5915 + 5480 key formats. |
| */ |
| #define MBEDTLS_PK_PARSE_EC_EXTENDED |
| |
| /** |
| * \def MBEDTLS_ERROR_STRERROR_DUMMY |
| * |
| * Enable a dummy error function to make use of mbedtls_strerror() in |
| * third party libraries easier when MBEDTLS_ERROR_C is disabled |
| * (no effect when MBEDTLS_ERROR_C is enabled). |
| * |
| * You can safely disable this if MBEDTLS_ERROR_C is enabled, or if you're |
| * not using mbedtls_strerror() or error_strerror() in your application. |
| * |
| * Disable if you run into name conflicts and want to really remove the |
| * mbedtls_strerror() |
| */ |
| #define MBEDTLS_ERROR_STRERROR_DUMMY |
| |
| /** |
| * \def MBEDTLS_GENPRIME |
| * |
| * Enable the prime-number generation code. |
| * |
| * Requires: MBEDTLS_BIGNUM_C |
| */ |
| #define MBEDTLS_GENPRIME |
| |
| /** |
| * \def MBEDTLS_FS_IO |
| * |
| * Enable functions that use the filesystem. |
| */ |
| #define MBEDTLS_FS_IO |
| |
| /** |
| * \def MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES |
| * |
| * Do not add default entropy sources. These are the platform specific, |
| * mbedtls_timing_hardclock and HAVEGE based poll functions. |
| * |
| * This is useful to have more control over the added entropy sources in an |
| * application. |
| * |
| * Uncomment this macro to prevent loading of default entropy functions. |
| */ |
| //#define MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES |
| |
| /** |
| * \def MBEDTLS_NO_PLATFORM_ENTROPY |
| * |
| * Do not use built-in platform entropy functions. |
| * This is useful if your platform does not support |
| * standards like the /dev/urandom or Windows CryptoAPI. |
| * |
| * Uncomment this macro to disable the built-in platform entropy functions. |
| */ |
| //#define MBEDTLS_NO_PLATFORM_ENTROPY |
| |
| /** |
| * \def MBEDTLS_ENTROPY_FORCE_SHA256 |
| * |
| * Force the entropy accumulator to use a SHA-256 accumulator instead of the |
| * default SHA-512 based one (if both are available). |
| * |
| * Requires: MBEDTLS_SHA256_C |
| * |
| * On 32-bit systems SHA-256 can be much faster than SHA-512. Use this option |
| * if you have performance concerns. |
| * |
| * This option is only useful if both MBEDTLS_SHA256_C and |
| * MBEDTLS_SHA512_C are defined. Otherwise the available hash module is used. |
| */ |
| //#define MBEDTLS_ENTROPY_FORCE_SHA256 |
| |
| /** |
| * \def MBEDTLS_MEMORY_DEBUG |
| * |
| * Enable debugging of buffer allocator memory issues. Automatically prints |
| * (to stderr) all (fatal) messages on memory allocation issues. Enables |
| * function for 'debug output' of allocated memory. |
| * |
| * Requires: MBEDTLS_MEMORY_BUFFER_ALLOC_C |
| * |
| * Uncomment this macro to let the buffer allocator print out error messages. |
| */ |
| //#define MBEDTLS_MEMORY_DEBUG |
| |
| /** |
| * \def MBEDTLS_MEMORY_BACKTRACE |
| * |
| * Include backtrace information with each allocated block. |
| * |
| * Requires: MBEDTLS_MEMORY_BUFFER_ALLOC_C |
| * GLIBC-compatible backtrace() an backtrace_symbols() support |
| * |
| * Uncomment this macro to include backtrace information |
| */ |
| //#define MBEDTLS_MEMORY_BACKTRACE |
| |
| /** |
| * \def MBEDTLS_PK_RSA_ALT_SUPPORT |
| * |
| * Support external private RSA keys (eg from a HSM) in the PK layer. |
| * |
| * Comment this macro to disable support for external private RSA keys. |
| */ |
| #define MBEDTLS_PK_RSA_ALT_SUPPORT |
| |
| /** |
| * \def MBEDTLS_PKCS1_V15 |
| * |
| * Enable support for PKCS#1 v1.5 encoding. |
| * |
| * Requires: MBEDTLS_RSA_C |
| * |
| * This enables support for PKCS#1 v1.5 operations. |
| */ |
| #define MBEDTLS_PKCS1_V15 |
| |
| /** |
| * \def MBEDTLS_PKCS1_V21 |
| * |
| * Enable support for PKCS#1 v2.1 encoding. |
| * |
| * Requires: MBEDTLS_MD_C, MBEDTLS_RSA_C |
| * |
| * This enables support for RSAES-OAEP and RSASSA-PSS operations. |
| */ |
| #define MBEDTLS_PKCS1_V21 |
| |
| /** |
| * \def MBEDTLS_RSA_NO_CRT |
| * |
| * Do not use the Chinese Remainder Theorem for the RSA private operation. |
| * |
| * Uncomment this macro to disable the use of CRT in RSA. |
| * |
| */ |
| //#define MBEDTLS_RSA_NO_CRT |
| |
| /** |
| * \def MBEDTLS_SELF_TEST |
| * |
| * Enable the checkup functions (*_self_test). |
| */ |
| #define MBEDTLS_SELF_TEST |
| |
| /** |
| * \def MBEDTLS_SHA256_SMALLER |
| * |
| * Enable an implementation of SHA-256 that has lower ROM footprint but also |
| * lower performance. |
| * |
| * The default implementation is meant to be a reasonnable compromise between |
| * performance and size. This version optimizes more aggressively for size at |
| * the expense of performance. Eg on Cortex-M4 it reduces the size of |
| * mbedtls_sha256_process() from ~2KB to ~0.5KB for a performance hit of about |
| * 30%. |
| * |
| * Uncomment to enable the smaller implementation of SHA256. |
| */ |
| //#define MBEDTLS_SHA256_SMALLER |
| |
| /** |
| * \def MBEDTLS_SSL_AEAD_RANDOM_IV |
| * |
| * Generate a random IV rather than using the record sequence number as a |
| * nonce for ciphersuites using and AEAD algorithm (GCM or CCM). |
| * |
| * Using the sequence number is generally recommended. |
| * |
| * Uncomment this macro to always use random IVs with AEAD ciphersuites. |
| */ |
| //#define MBEDTLS_SSL_AEAD_RANDOM_IV |
| |
| /** |
| * \def MBEDTLS_SSL_ALL_ALERT_MESSAGES |
| * |
| * Enable sending of alert messages in case of encountered errors as per RFC. |
| * If you choose not to send the alert messages, mbed TLS can still communicate |
| * with other servers, only debugging of failures is harder. |
| * |
| * The advantage of not sending alert messages, is that no information is given |
| * about reasons for failures thus preventing adversaries of gaining intel. |
| * |
| * Enable sending of all alert messages |
| */ |
| #define MBEDTLS_SSL_ALL_ALERT_MESSAGES |
| |
| /** |
| * \def MBEDTLS_SSL_DEBUG_ALL |
| * |
| * Enable the debug messages in SSL module for all issues. |
| * Debug messages have been disabled in some places to prevent timing |
| * attacks due to (unbalanced) debugging function calls. |
| * |
| * If you need all error reporting you should enable this during debugging, |
| * but remove this for production servers that should log as well. |
| * |
| * Uncomment this macro to report all debug messages on errors introducing |
| * a timing side-channel. |
| * |
| */ |
| //#define MBEDTLS_SSL_DEBUG_ALL |
| |
| /** \def MBEDTLS_SSL_ENCRYPT_THEN_MAC |
| * |
| * Enable support for Encrypt-then-MAC, RFC 7366. |
| * |
| * This allows peers that both support it to use a more robust protection for |
| * ciphersuites using CBC, providing deep resistance against timing attacks |
| * on the padding or underlying cipher. |
| * |
| * This only affects CBC ciphersuites, and is useless if none is defined. |
| * |
| * Requires: MBEDTLS_SSL_PROTO_TLS1 or |
| * MBEDTLS_SSL_PROTO_TLS1_1 or |
| * MBEDTLS_SSL_PROTO_TLS1_2 |
| * |
| * Comment this macro to disable support for Encrypt-then-MAC |
| */ |
| #define MBEDTLS_SSL_ENCRYPT_THEN_MAC |
| |
| /** \def MBEDTLS_SSL_EXTENDED_MASTER_SECRET |
| * |
| * Enable support for Extended Master Secret, aka Session Hash |
| * (draft-ietf-tls-session-hash-02). |
| * |
| * This was introduced as "the proper fix" to the Triple Handshake familiy of |
| * attacks, but it is recommended to always use it (even if you disable |
| * renegotiation), since it actually fixes a more fundamental issue in the |
| * original SSL/TLS design, and has implications beyond Triple Handshake. |
| * |
| * Requires: MBEDTLS_SSL_PROTO_TLS1 or |
| * MBEDTLS_SSL_PROTO_TLS1_1 or |
| * MBEDTLS_SSL_PROTO_TLS1_2 |
| * |
| * Comment this macro to disable support for Extended Master Secret. |
| */ |
| #define MBEDTLS_SSL_EXTENDED_MASTER_SECRET |
| |
| /** |
| * \def MBEDTLS_SSL_FALLBACK_SCSV |
| * |
| * Enable support for FALLBACK_SCSV (draft-ietf-tls-downgrade-scsv-00). |
| * |
| * For servers, it is recommended to always enable this, unless you support |
| * only one version of TLS, or know for sure that none of your clients |
| * implements a fallback strategy. |
| * |
| * For clients, you only need this if you're using a fallback strategy, which |
| * is not recommended in the first place, unless you absolutely need it to |
| * interoperate with buggy (version-intolerant) servers. |
| * |
| * Comment this macro to disable support for FALLBACK_SCSV |
| */ |
| #define MBEDTLS_SSL_FALLBACK_SCSV |
| |
| /** |
| * \def MBEDTLS_SSL_HW_RECORD_ACCEL |
| * |
| * Enable hooking functions in SSL module for hardware acceleration of |
| * individual records. |
| * |
| * Uncomment this macro to enable hooking functions. |
| */ |
| //#define MBEDTLS_SSL_HW_RECORD_ACCEL |
| |
| /** |
| * \def MBEDTLS_SSL_CBC_RECORD_SPLITTING |
| * |
| * Enable 1/n-1 record splitting for CBC mode in SSLv3 and TLS 1.0. |
| * |
| * This is a countermeasure to the BEAST attack, which also minimizes the risk |
| * of interoperability issues compared to sending 0-length records. |
| * |
| * Comment this macro to disable 1/n-1 record splitting. |
| */ |
| #define MBEDTLS_SSL_CBC_RECORD_SPLITTING |
| |
| /** |
| * \def MBEDTLS_SSL_RENEGOTIATION |
| * |
| * Disable support for TLS renegotiation. |
| * |
| * The two main uses of renegotiation are (1) refresh keys on long-lived |
| * connections and (2) client authentication after the initial handshake. |
| * If you don't need renegotiation, it's probably better to disable it, since |
| * it has been associated with security issues in the past and is easy to |
| * misuse/misunderstand. |
| * |
| * Comment this to disable support for renegotiation. |
| */ |
| #define MBEDTLS_SSL_RENEGOTIATION |
| |
| /** |
| * \def MBEDTLS_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO |
| * |
| * Enable support for receiving and parsing SSLv2 Client Hello messages for the |
| * SSL Server module (MBEDTLS_SSL_SRV_C). |
| * |
| * Uncomment this macro to enable support for SSLv2 Client Hello messages. |
| */ |
| //#define MBEDTLS_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO |
| |
| /** |
| * \def MBEDTLS_SSL_SRV_RESPECT_CLIENT_PREFERENCE |
| * |
| * Pick the ciphersuite according to the client's preferences rather than ours |
| * in the SSL Server module (MBEDTLS_SSL_SRV_C). |
| * |
| * Uncomment this macro to respect client's ciphersuite order |
| */ |
| //#define MBEDTLS_SSL_SRV_RESPECT_CLIENT_PREFERENCE |
| |
| /** |
| * \def MBEDTLS_SSL_MAX_FRAGMENT_LENGTH |
| * |
| * Enable support for RFC 6066 max_fragment_length extension in SSL. |
| * |
| * Comment this macro to disable support for the max_fragment_length extension |
| */ |
| #define MBEDTLS_SSL_MAX_FRAGMENT_LENGTH |
| |
| /** |
| * \def MBEDTLS_SSL_PROTO_SSL3 |
| * |
| * Enable support for SSL 3.0. |
| * |
| * Requires: MBEDTLS_MD5_C |
| * MBEDTLS_SHA1_C |
| * |
| * Comment this macro to disable support for SSL 3.0 |
| */ |
| //#define MBEDTLS_SSL_PROTO_SSL3 |
| |
| /** |
| * \def MBEDTLS_SSL_PROTO_TLS1 |
| * |
| * Enable support for TLS 1.0. |
| * |
| * Requires: MBEDTLS_MD5_C |
| * MBEDTLS_SHA1_C |
| * |
| * Comment this macro to disable support for TLS 1.0 |
| */ |
| #define MBEDTLS_SSL_PROTO_TLS1 |
| |
| /** |
| * \def MBEDTLS_SSL_PROTO_TLS1_1 |
| * |
| * Enable support for TLS 1.1 (and DTLS 1.0 if DTLS is enabled). |
| * |
| * Requires: MBEDTLS_MD5_C |
| * MBEDTLS_SHA1_C |
| * |
| * Comment this macro to disable support for TLS 1.1 / DTLS 1.0 |
| */ |
| #define MBEDTLS_SSL_PROTO_TLS1_1 |
| |
| /** |
| * \def MBEDTLS_SSL_PROTO_TLS1_2 |
| * |
| * Enable support for TLS 1.2 (and DTLS 1.2 if DTLS is enabled). |
| * |
| * Requires: MBEDTLS_SHA1_C or MBEDTLS_SHA256_C or MBEDTLS_SHA512_C |
| * (Depends on ciphersuites) |
| * |
| * Comment this macro to disable support for TLS 1.2 / DTLS 1.2 |
| */ |
| #define MBEDTLS_SSL_PROTO_TLS1_2 |
| |
| /** |
| * \def MBEDTLS_SSL_PROTO_DTLS |
| * |
| * Enable support for DTLS (all available versions). |
| * |
| * Enable this and MBEDTLS_SSL_PROTO_TLS1_1 to enable DTLS 1.0, |
| * and/or this and MBEDTLS_SSL_PROTO_TLS1_2 to enable DTLS 1.2. |
| * |
| * Requires: MBEDTLS_SSL_PROTO_TLS1_1 |
| * or MBEDTLS_SSL_PROTO_TLS1_2 |
| * |
| * Comment this macro to disable support for DTLS |
| */ |
| #define MBEDTLS_SSL_PROTO_DTLS |
| |
| /** |
| * \def MBEDTLS_SSL_ALPN |
| * |
| * Enable support for RFC 7301 Application Layer Protocol Negotiation. |
| * |
| * Comment this macro to disable support for ALPN. |
| */ |
| #define MBEDTLS_SSL_ALPN |
| |
| /** |
| * \def MBEDTLS_SSL_DTLS_ANTI_REPLAY |
| * |
| * Enable support for the anti-replay mechanism in DTLS. |
| * |
| * Requires: MBEDTLS_SSL_TLS_C |
| * MBEDTLS_SSL_PROTO_DTLS |
| * |
| * \warning Disabling this is often a security risk! |
| * See mbedtls_ssl_conf_dtls_anti_replay() for details. |
| * |
| * Comment this to disable anti-replay in DTLS. |
| */ |
| #define MBEDTLS_SSL_DTLS_ANTI_REPLAY |
| |
| /** |
| * \def MBEDTLS_SSL_DTLS_HELLO_VERIFY |
| * |
| * Enable support for HelloVerifyRequest on DTLS servers. |
| * |
| * This feature is highly recommended to prevent DTLS servers being used as |
| * amplifiers in DoS attacks against other hosts. It should always be enabled |
| * unless you know for sure amplification cannot be a problem in the |
| * environment in which your server operates. |
| * |
| * \warning Disabling this can ba a security risk! (see above) |
| * |
| * Requires: MBEDTLS_SSL_PROTO_DTLS |
| * |
| * Comment this to disable support for HelloVerifyRequest. |
| */ |
| #define MBEDTLS_SSL_DTLS_HELLO_VERIFY |
| |
| /** |
| * \def MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE |
| * |
| * Enable server-side support for clients that reconnect from the same port. |
| * |
| * Some clients unexpectedly close the connection and try to reconnect using the |
| * same source port. This needs special support from the server to handle the |
| * new connection securely, as described in section 4.2.8 of RFC 6347. This |
| * flag enables that support. |
| * |
| * Requires: MBEDTLS_SSL_DTLS_HELLO_VERIFY |
| * |
| * Comment this to disable support for clients reusing the source port. |
| */ |
| #define MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE |
| |
| /** |
| * \def MBEDTLS_SSL_DTLS_BADMAC_LIMIT |
| * |
| * Enable support for a limit of records with bad MAC. |
| * |
| * See mbedtls_ssl_conf_dtls_badmac_limit(). |
| * |
| * Requires: MBEDTLS_SSL_PROTO_DTLS |
| */ |
| #define MBEDTLS_SSL_DTLS_BADMAC_LIMIT |
| |
| /** |
| * \def MBEDTLS_SSL_SESSION_TICKETS |
| * |
| * Enable support for RFC 5077 session tickets in SSL. |
| * Client-side, provides full support for session tickets (maintainance of a |
| * session store remains the responsibility of the application, though). |
| * Server-side, you also need to provide callbacks for writing and parsing |
| * tickets, including authenticated encryption and key management. Example |
| * callbacks are provided by MBEDTLS_SSL_TICKET_C. |
| * |
| * Comment this macro to disable support for SSL session tickets |
| */ |
| #define MBEDTLS_SSL_SESSION_TICKETS |
| |
| /** |
| * \def MBEDTLS_SSL_EXPORT_KEYS |
| * |
| * Enable support for exporting key block and master secret. |
| * This is required for certain users of TLS, e.g. EAP-TLS. |
| * |
| * Comment this macro to disable support for key export |
| */ |
| #define MBEDTLS_SSL_EXPORT_KEYS |
| |
| /** |
| * \def MBEDTLS_SSL_SERVER_NAME_INDICATION |
| * |
| * Enable support for RFC 6066 server name indication (SNI) in SSL. |
| * |
| * Requires: MBEDTLS_X509_CRT_PARSE_C |
| * |
| * Comment this macro to disable support for server name indication in SSL |
| */ |
| #define MBEDTLS_SSL_SERVER_NAME_INDICATION |
| |
| /** |
| * \def MBEDTLS_SSL_TRUNCATED_HMAC |
| * |
| * Enable support for RFC 6066 truncated HMAC in SSL. |
| * |
| * Comment this macro to disable support for truncated HMAC in SSL |
| */ |
| #define MBEDTLS_SSL_TRUNCATED_HMAC |
| |
| /** |
| * \def MBEDTLS_THREADING_ALT |
| * |
| * Provide your own alternate threading implementation. |
| * |
| * Requires: MBEDTLS_THREADING_C |
| * |
| * Uncomment this to allow your own alternate threading implementation. |
| */ |
| //#define MBEDTLS_THREADING_ALT |
| |
| /** |
| * \def MBEDTLS_THREADING_PTHREAD |
| * |
| * Enable the pthread wrapper layer for the threading layer. |
| * |
| * Requires: MBEDTLS_THREADING_C |
| * |
| * Uncomment this to enable pthread mutexes. |
| */ |
| //#define MBEDTLS_THREADING_PTHREAD |
| |
| /** |
| * \def MBEDTLS_VERSION_FEATURES |
| * |
| * Allow run-time checking of compile-time enabled features. Thus allowing users |
| * to check at run-time if the library is for instance compiled with threading |
| * support via mbedtls_version_check_feature(). |
| * |
| * Requires: MBEDTLS_VERSION_C |
| * |
| * Comment this to disable run-time checking and save ROM space |
| */ |
| #define MBEDTLS_VERSION_FEATURES |
| |
| /** |
| * \def MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 |
| * |
| * If set, the X509 parser will not break-off when parsing an X509 certificate |
| * and encountering an extension in a v1 or v2 certificate. |
| * |
| * Uncomment to prevent an error. |
| */ |
| //#define MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 |
| |
| /** |
| * \def MBEDTLS_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION |
| * |
| * If set, the X509 parser will not break-off when parsing an X509 certificate |
| * and encountering an unknown critical extension. |
| * |
| * \warning Depending on your PKI use, enabling this can be a security risk! |
| * |
| * Uncomment to prevent an error. |
| */ |
| //#define MBEDTLS_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION |
| |
| /** |
| * \def MBEDTLS_X509_CHECK_KEY_USAGE |
| * |
| * Enable verification of the keyUsage extension (CA and leaf certificates). |
| * |
| * Disabling this avoids problems with mis-issued and/or misused |
| * (intermediate) CA and leaf certificates. |
| * |
| * \warning Depending on your PKI use, disabling this can be a security risk! |
| * |
| * Comment to skip keyUsage checking for both CA and leaf certificates. |
| */ |
| #define MBEDTLS_X509_CHECK_KEY_USAGE |
| |
| /** |
| * \def MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE |
| * |
| * Enable verification of the extendedKeyUsage extension (leaf certificates). |
| * |
| * Disabling this avoids problems with mis-issued and/or misused certificates. |
| * |
| * \warning Depending on your PKI use, disabling this can be a security risk! |
| * |
| * Comment to skip extendedKeyUsage checking for certificates. |
| */ |
| #define MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE |
| |
| /** |
| * \def MBEDTLS_X509_RSASSA_PSS_SUPPORT |
| * |
| * Enable parsing and verification of X.509 certificates, CRLs and CSRS |
| * signed with RSASSA-PSS (aka PKCS#1 v2.1). |
| * |
| * Comment this macro to disallow using RSASSA-PSS in certificates. |
| */ |
| #define MBEDTLS_X509_RSASSA_PSS_SUPPORT |
| |
| /** |
| * \def MBEDTLS_ZLIB_SUPPORT |
| * |
| * If set, the SSL/TLS module uses ZLIB to support compression and |
| * decompression of packet data. |
| * |
| * \warning TLS-level compression MAY REDUCE SECURITY! See for example the |
| * CRIME attack. Before enabling this option, you should examine with care if |
| * CRIME or similar exploits may be a applicable to your use case. |
| * |
| * \note Currently compression can't be used with DTLS. |
| * |
| * Used in: library/ssl_tls.c |
| * library/ssl_cli.c |
| * library/ssl_srv.c |
| * |
| * This feature requires zlib library and headers to be present. |
| * |
| * Uncomment to enable use of ZLIB |
| */ |
| //#define MBEDTLS_ZLIB_SUPPORT |
| /* \} name SECTION: mbed TLS feature support */ |
| |
| /** |
| * \name SECTION: mbed TLS modules |
| * |
| * This section enables or disables entire modules in mbed TLS |
| * \{ |
| */ |
| |
| /** |
| * \def MBEDTLS_AESNI_C |
| * |
| * Enable AES-NI support on x86-64. |
| * |
| * Module: library/aesni.c |
| * Caller: library/aes.c |
| * |
| * Requires: MBEDTLS_HAVE_ASM |
| * |
| * This modules adds support for the AES-NI instructions on x86-64 |
| */ |
| #define MBEDTLS_AESNI_C |
| |
| /** |
| * \def MBEDTLS_AES_C |
| * |
| * Enable the AES block cipher. |
| * |
| * Module: library/aes.c |
| * Caller: library/ssl_tls.c |
| * library/pem.c |
| * library/ctr_drbg.c |
| * |
| * This module enables the following ciphersuites (if other requisites are |
| * enabled as well): |
| * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA |
| * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA |
| * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA |
| * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA |
| * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256 |
| * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384 |
| * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256 |
| * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384 |
| * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256 |
| * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384 |
| * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256 |
| * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384 |
| * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 |
| * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 |
| * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 |
| * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384 |
| * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384 |
| * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA256 |
| * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA |
| * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA |
| * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA |
| * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 |
| * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 |
| * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 |
| * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 |
| * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 |
| * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 |
| * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA |
| * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA |
| * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA |
| * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_GCM_SHA384 |
| * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384 |
| * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA384 |
| * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA |
| * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA |
| * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_GCM_SHA256 |
| * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256 |
| * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA256 |
| * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA |
| * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA |
| * MBEDTLS_TLS_RSA_WITH_AES_256_GCM_SHA384 |
| * MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA256 |
| * MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA |
| * MBEDTLS_TLS_RSA_WITH_AES_128_GCM_SHA256 |
| * MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA256 |
| * MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA |
| * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_GCM_SHA384 |
| * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA384 |
| * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA |
| * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_GCM_SHA256 |
| * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA256 |
| * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA |
| * MBEDTLS_TLS_PSK_WITH_AES_256_GCM_SHA384 |
| * MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA384 |
| * MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA |
| * MBEDTLS_TLS_PSK_WITH_AES_128_GCM_SHA256 |
| * MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA256 |
| * MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA |
| * |
| * PEM_PARSE uses AES for decrypting encrypted keys. |
| */ |
| #define MBEDTLS_AES_C |
| |
| /** |
| * \def MBEDTLS_ARC4_C |
| * |
| * Enable the ARCFOUR stream cipher. |
| * |
| * Module: library/arc4.c |
| * Caller: library/ssl_tls.c |
| * |
| * This module enables the following ciphersuites (if other requisites are |
| * enabled as well): |
| * MBEDTLS_TLS_ECDH_ECDSA_WITH_RC4_128_SHA |
| * MBEDTLS_TLS_ECDH_RSA_WITH_RC4_128_SHA |
| * MBEDTLS_TLS_ECDHE_ECDSA_WITH_RC4_128_SHA |
| * MBEDTLS_TLS_ECDHE_RSA_WITH_RC4_128_SHA |
| * MBEDTLS_TLS_ECDHE_PSK_WITH_RC4_128_SHA |
| * MBEDTLS_TLS_DHE_PSK_WITH_RC4_128_SHA |
| * MBEDTLS_TLS_RSA_WITH_RC4_128_SHA |
| * MBEDTLS_TLS_RSA_WITH_RC4_128_MD5 |
| * MBEDTLS_TLS_RSA_PSK_WITH_RC4_128_SHA |
| * MBEDTLS_TLS_PSK_WITH_RC4_128_SHA |
| */ |
| #define MBEDTLS_ARC4_C |
| |
| /** |
| * \def MBEDTLS_ASN1_PARSE_C |
| * |
| * Enable the generic ASN1 parser. |
| * |
| * Module: library/asn1.c |
| * Caller: library/x509.c |
| * library/dhm.c |
| * library/pkcs12.c |
| * library/pkcs5.c |
| * library/pkparse.c |
| */ |
| #define MBEDTLS_ASN1_PARSE_C |
| |
| /** |
| * \def MBEDTLS_ASN1_WRITE_C |
| * |
| * Enable the generic ASN1 writer. |
| * |
| * Module: library/asn1write.c |
| * Caller: library/ecdsa.c |
| * library/pkwrite.c |
| * library/x509_create.c |
| * library/x509write_crt.c |
| * library/mbedtls_x509write_csr.c |
| */ |
| #define MBEDTLS_ASN1_WRITE_C |
| |
| /** |
| * \def MBEDTLS_BASE64_C |
| * |
| * Enable the Base64 module. |
| * |
| * Module: library/base64.c |
| * Caller: library/pem.c |
| * |
| * This module is required for PEM support (required by X.509). |
| */ |
| #define MBEDTLS_BASE64_C |
| |
| /** |
| * \def MBEDTLS_BIGNUM_C |
| * |
| * Enable the multi-precision integer library. |
| * |
| * Module: library/bignum.c |
| * Caller: library/dhm.c |
| * library/ecp.c |
| * library/ecdsa.c |
| * library/rsa.c |
| * library/ssl_tls.c |
| * |
| * This module is required for RSA, DHM and ECC (ECDH, ECDSA) support. |
| */ |
| #define MBEDTLS_BIGNUM_C |
| |
| /** |
| * \def MBEDTLS_BLOWFISH_C |
| * |
| * Enable the Blowfish block cipher. |
| * |
| * Module: library/blowfish.c |
| */ |
| #define MBEDTLS_BLOWFISH_C |
| |
| /** |
| * \def MBEDTLS_CAMELLIA_C |
| * |
| * Enable the Camellia block cipher. |
| * |
| * Module: library/camellia.c |
| * Caller: library/ssl_tls.c |
| * |
| * This module enables the following ciphersuites (if other requisites are |
| * enabled as well): |
| * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 |
| * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 |
| * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256 |
| * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384 |
| * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 |
| * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 |
| * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256 |
| * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384 |
| * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 |
| * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 |
| * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 |
| * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 |
| * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384 |
| * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256 |
| * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA |
| * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 |
| * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 |
| * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 |
| * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 |
| * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 |
| * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 |
| * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA |
| * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384 |
| * MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 |
| * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 |
| * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256 |
| * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 |
| * MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 |
| * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384 |
| * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256 |
| * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA |
| * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256 |
| * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256 |
| * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA |
| * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384 |
| * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384 |
| * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256 |
| * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256 |
| * MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384 |
| * MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384 |
| * MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256 |
| * MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256 |
| */ |
| #define MBEDTLS_CAMELLIA_C |
| |
| /** |
| * \def MBEDTLS_CCM_C |
| * |
| * Enable the Counter with CBC-MAC (CCM) mode for 128-bit block cipher. |
| * |
| * Module: library/ccm.c |
| * |
| * Requires: MBEDTLS_AES_C or MBEDTLS_CAMELLIA_C |
| * |
| * This module enables the AES-CCM ciphersuites, if other requisites are |
| * enabled as well. |
| */ |
| #define MBEDTLS_CCM_C |
| |
| /** |
| * \def MBEDTLS_CERTS_C |
| * |
| * Enable the test certificates. |
| * |
| * Module: library/certs.c |
| * Caller: |
| * |
| * This module is used for testing (ssl_client/server). |
| */ |
| #define MBEDTLS_CERTS_C |
| |
| /** |
| * \def MBEDTLS_CIPHER_C |
| * |
| * Enable the generic cipher layer. |
| * |
| * Module: library/cipher.c |
| * Caller: library/ssl_tls.c |
| * |
| * Uncomment to enable generic cipher wrappers. |
| */ |
| #define MBEDTLS_CIPHER_C |
| |
| /** |
| * \def MBEDTLS_CTR_DRBG_C |
| * |
| * Enable the CTR_DRBG AES-256-based random generator. |
| * |
| * Module: library/ctr_drbg.c |
| * Caller: |
| * |
| * Requires: MBEDTLS_AES_C |
| * |
| * This module provides the CTR_DRBG AES-256 random number generator. |
| */ |
| #define MBEDTLS_CTR_DRBG_C |
| |
| /** |
| * \def MBEDTLS_DEBUG_C |
| * |
| * Enable the debug functions. |
| * |
| * Module: library/debug.c |
| * Caller: library/ssl_cli.c |
| * library/ssl_srv.c |
| * library/ssl_tls.c |
| * |
| * This module provides debugging functions. |
| */ |
| #define MBEDTLS_DEBUG_C |
| |
| /** |
| * \def MBEDTLS_DES_C |
| * |
| * Enable the DES block cipher. |
| * |
| * Module: library/des.c |
| * Caller: library/pem.c |
| * library/ssl_tls.c |
| * |
| * This module enables the following ciphersuites (if other requisites are |
| * enabled as well): |
| * MBEDTLS_TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA |
| * MBEDTLS_TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA |
| * MBEDTLS_TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA |
| * MBEDTLS_TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA |
| * MBEDTLS_TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA |
| * MBEDTLS_TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA |
| * MBEDTLS_TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA |
| * MBEDTLS_TLS_RSA_WITH_3DES_EDE_CBC_SHA |
| * MBEDTLS_TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA |
| * MBEDTLS_TLS_PSK_WITH_3DES_EDE_CBC_SHA |
| * |
| * PEM_PARSE uses DES/3DES for decrypting encrypted keys. |
| */ |
| #define MBEDTLS_DES_C |
| |
| /** |
| * \def MBEDTLS_DHM_C |
| * |
| * Enable the Diffie-Hellman-Merkle module. |
| * |
| * Module: library/dhm.c |
| * Caller: library/ssl_cli.c |
| * library/ssl_srv.c |
| * |
| * This module is used by the following key exchanges: |
| * DHE-RSA, DHE-PSK |
| */ |
| #define MBEDTLS_DHM_C |
| |
| /** |
| * \def MBEDTLS_ECDH_C |
| * |
| * Enable the elliptic curve Diffie-Hellman library. |
| * |
| * Module: library/ecdh.c |
| * Caller: library/ssl_cli.c |
| * library/ssl_srv.c |
| * |
| * This module is used by the following key exchanges: |
| * ECDHE-ECDSA, ECDHE-RSA, DHE-PSK |
| * |
| * Requires: MBEDTLS_ECP_C |
| */ |
| #define MBEDTLS_ECDH_C |
| |
| /** |
| * \def MBEDTLS_ECDSA_C |
| * |
| * Enable the elliptic curve DSA library. |
| * |
| * Module: library/ecdsa.c |
| * Caller: |
| * |
| * This module is used by the following key exchanges: |
| * ECDHE-ECDSA |
| * |
| * Requires: MBEDTLS_ECP_C, MBEDTLS_ASN1_WRITE_C, MBEDTLS_ASN1_PARSE_C |
| */ |
| #define MBEDTLS_ECDSA_C |
| |
| /** |
| * \def MBEDTLS_ECJPAKE_C |
| * |
| * Enable the elliptic curve J-PAKE library. |
| * |
| * \warning This is currently experimental. EC J-PAKE support is based on the |
| * Thread v1.0.0 specification; incompatible changes to the specification |
| * might still happen. For this reason, this is disabled by default. |
| * |
| * Module: library/ecjpake.c |
| * Caller: |
| * |
| * This module is used by the following key exchanges: |
| * ECJPAKE |
| * |
| * Requires: MBEDTLS_ECP_C, MBEDTLS_MD_C |
| */ |
| //#define MBEDTLS_ECJPAKE_C |
| |
| /** |
| * \def MBEDTLS_ECP_C |
| * |
| * Enable the elliptic curve over GF(p) library. |
| * |
| * Module: library/ecp.c |
| * Caller: library/ecdh.c |
| * library/ecdsa.c |
| * library/ecjpake.c |
| * |
| * Requires: MBEDTLS_BIGNUM_C and at least one MBEDTLS_ECP_DP_XXX_ENABLED |
| */ |
| #define MBEDTLS_ECP_C |
| |
| /** |
| * \def MBEDTLS_ENTROPY_C |
| * |
| * Enable the platform-specific entropy code. |
| * |
| * Module: library/entropy.c |
| * Caller: |
| * |
| * Requires: MBEDTLS_SHA512_C or MBEDTLS_SHA256_C |
| * |
| * This module provides a generic entropy pool |
| */ |
| #define MBEDTLS_ENTROPY_C |
| |
| /** |
| * \def MBEDTLS_ERROR_C |
| * |
| * Enable error code to error string conversion. |
| * |
| * Module: library/error.c |
| * Caller: |
| * |
| * This module enables mbedtls_strerror(). |
| */ |
| #define MBEDTLS_ERROR_C |
| |
| /** |
| * \def MBEDTLS_GCM_C |
| * |
| * Enable the Galois/Counter Mode (GCM) for AES. |
| * |
| * Module: library/gcm.c |
| * |
| * Requires: MBEDTLS_AES_C or MBEDTLS_CAMELLIA_C |
| * |
| * This module enables the AES-GCM and CAMELLIA-GCM ciphersuites, if other |
| * requisites are enabled as well. |
| */ |
| #define MBEDTLS_GCM_C |
| |
| /** |
| * \def MBEDTLS_HAVEGE_C |
| * |
| * Enable the HAVEGE random generator. |
| * |
| * Warning: the HAVEGE random generator is not suitable for virtualized |
| * environments |
| * |
| * Warning: the HAVEGE random generator is dependent on timing and specific |
| * processor traits. It is therefore not advised to use HAVEGE as |
| * your applications primary random generator or primary entropy pool |
| * input. As a secondary input to your entropy pool, it IS able add |
| * the (limited) extra entropy it provides. |
| * |
| * Module: library/havege.c |
| * Caller: |
| * |
| * Requires: MBEDTLS_TIMING_C |
| * |
| * Uncomment to enable the HAVEGE random generator. |
| */ |
| //#define MBEDTLS_HAVEGE_C |
| |
| /** |
| * \def MBEDTLS_HMAC_DRBG_C |
| * |
| * Enable the HMAC_DRBG random generator. |
| * |
| * Module: library/hmac_drbg.c |
| * Caller: |
| * |
| * Requires: MBEDTLS_MD_C |
| * |
| * Uncomment to enable the HMAC_DRBG random number geerator. |
| */ |
| #define MBEDTLS_HMAC_DRBG_C |
| |
| /** |
| * \def MBEDTLS_MD_C |
| * |
| * Enable the generic message digest layer. |
| * |
| * Module: library/mbedtls_md.c |
| * Caller: |
| * |
| * Uncomment to enable generic message digest wrappers. |
| */ |
| #define MBEDTLS_MD_C |
| |
| /** |
| * \def MBEDTLS_MD2_C |
| * |
| * Enable the MD2 hash algorithm. |
| * |
| * Module: library/mbedtls_md2.c |
| * Caller: |
| * |
| * Uncomment to enable support for (rare) MD2-signed X.509 certs. |
| */ |
| //#define MBEDTLS_MD2_C |
| |
| /** |
| * \def MBEDTLS_MD4_C |
| * |
| * Enable the MD4 hash algorithm. |
| * |
| * Module: library/mbedtls_md4.c |
| * Caller: |
| * |
| * Uncomment to enable support for (rare) MD4-signed X.509 certs. |
| */ |
| //#define MBEDTLS_MD4_C |
| |
| /** |
| * \def MBEDTLS_MD5_C |
| * |
| * Enable the MD5 hash algorithm. |
| * |
| * Module: library/mbedtls_md5.c |
| * Caller: library/mbedtls_md.c |
| * library/pem.c |
| * library/ssl_tls.c |
| * |
| * This module is required for SSL/TLS and X.509. |
| * PEM_PARSE uses MD5 for decrypting encrypted keys. |
| */ |
| #define MBEDTLS_MD5_C |
| |
| /** |
| * \def MBEDTLS_MEMORY_BUFFER_ALLOC_C |
| * |
| * Enable the buffer allocator implementation that makes use of a (stack) |
| * based buffer to 'allocate' dynamic memory. (replaces calloc() and free() |
| * calls) |
| * |
| * Module: library/memory_buffer_alloc.c |
| * |
| * Requires: MBEDTLS_PLATFORM_C |
| * MBEDTLS_PLATFORM_MEMORY (to use it within mbed TLS) |
| * |
| * Enable this module to enable the buffer memory allocator. |
| */ |
| //#define MBEDTLS_MEMORY_BUFFER_ALLOC_C |
| |
| /** |
| * \def MBEDTLS_NET_C |
| * |
| * Enable the TCP and UDP over IPv6/IPv4 networking routines. |
| * |
| * \note This module only works on POSIX/Unix (including Linux, BSD and OS X) |
| * and Windows. For other platforms, you'll want to disable it, and write your |
| * own networking callbacks to be passed to \c mbedtls_ssl_set_bio(). |
| * |
| * \note See also our Knowledge Base article about porting to a new |
| * environment: |
| * https://tls.mbed.org/kb/how-to/how-do-i-port-mbed-tls-to-a-new-environment-OS |
| * |
| * Module: library/net.c |
| * |
| * This module provides networking routines. |
| */ |
| #define MBEDTLS_NET_C |
| |
| /** |
| * \def MBEDTLS_OID_C |
| * |
| * Enable the OID database. |
| * |
| * Module: library/oid.c |
| * Caller: library/asn1write.c |
| * library/pkcs5.c |
| * library/pkparse.c |
| * library/pkwrite.c |
| * library/rsa.c |
| * library/x509.c |
| * library/x509_create.c |
| * library/mbedtls_x509_crl.c |
| * library/mbedtls_x509_crt.c |
| * library/mbedtls_x509_csr.c |
| * library/x509write_crt.c |
| * library/mbedtls_x509write_csr.c |
| * |
| * This modules translates between OIDs and internal values. |
| */ |
| #define MBEDTLS_OID_C |
| |
| /** |
| * \def MBEDTLS_PADLOCK_C |
| * |
| * Enable VIA Padlock support on x86. |
| * |
| * Module: library/padlock.c |
| * Caller: library/aes.c |
| * |
| * Requires: MBEDTLS_HAVE_ASM |
| * |
| * This modules adds support for the VIA PadLock on x86. |
| */ |
| #define MBEDTLS_PADLOCK_C |
| |
| /** |
| * \def MBEDTLS_PEM_PARSE_C |
| * |
| * Enable PEM decoding / parsing. |
| * |
| * Module: library/pem.c |
| * Caller: library/dhm.c |
| * library/pkparse.c |
| * library/mbedtls_x509_crl.c |
| * library/mbedtls_x509_crt.c |
| * library/mbedtls_x509_csr.c |
| * |
| * Requires: MBEDTLS_BASE64_C |
| * |
| * This modules adds support for decoding / parsing PEM files. |
| */ |
| #define MBEDTLS_PEM_PARSE_C |
| |
| /** |
| * \def MBEDTLS_PEM_WRITE_C |
| * |
| * Enable PEM encoding / writing. |
| * |
| * Module: library/pem.c |
| * Caller: library/pkwrite.c |
| * library/x509write_crt.c |
| * library/mbedtls_x509write_csr.c |
| * |
| * Requires: MBEDTLS_BASE64_C |
| * |
| * This modules adds support for encoding / writing PEM files. |
| */ |
| #define MBEDTLS_PEM_WRITE_C |
| |
| /** |
| * \def MBEDTLS_PK_C |
| * |
| * Enable the generic public (asymetric) key layer. |
| * |
| * Module: library/pk.c |
| * Caller: library/ssl_tls.c |
| * library/ssl_cli.c |
| * library/ssl_srv.c |
| * |
| * Requires: MBEDTLS_RSA_C or MBEDTLS_ECP_C |
| * |
| * Uncomment to enable generic public key wrappers. |
| */ |
| #define MBEDTLS_PK_C |
| |
| /** |
| * \def MBEDTLS_PK_PARSE_C |
| * |
| * Enable the generic public (asymetric) key parser. |
| * |
| * Module: library/pkparse.c |
| * Caller: library/mbedtls_x509_crt.c |
| * library/mbedtls_x509_csr.c |
| * |
| * Requires: MBEDTLS_PK_C |
| * |
| * Uncomment to enable generic public key parse functions. |
| */ |
| #define MBEDTLS_PK_PARSE_C |
| |
| /** |
| * \def MBEDTLS_PK_WRITE_C |
| * |
| * Enable the generic public (asymetric) key writer. |
| * |
| * Module: library/pkwrite.c |
| * Caller: library/x509write.c |
| * |
| * Requires: MBEDTLS_PK_C |
| * |
| * Uncomment to enable generic public key write functions. |
| */ |
| #define MBEDTLS_PK_WRITE_C |
| |
| /** |
| * \def MBEDTLS_PKCS5_C |
| * |
| * Enable PKCS#5 functions. |
| * |
| * Module: library/pkcs5.c |
| * |
| * Requires: MBEDTLS_MD_C |
| * |
| * This module adds support for the PKCS#5 functions. |
| */ |
| #define MBEDTLS_PKCS5_C |
| |
| /** |
| * \def MBEDTLS_PKCS11_C |
| * |
| * Enable wrapper for PKCS#11 smartcard support. |
| * |
| * Module: library/pkcs11.c |
| * Caller: library/pk.c |
| * |
| * Requires: MBEDTLS_PK_C |
| * |
| * This module enables SSL/TLS PKCS #11 smartcard support. |
| * Requires the presence of the PKCS#11 helper library (libpkcs11-helper) |
| */ |
| //#define MBEDTLS_PKCS11_C |
| |
| /** |
| * \def MBEDTLS_PKCS12_C |
| * |
| * Enable PKCS#12 PBE functions. |
| * Adds algorithms for parsing PKCS#8 encrypted private keys |
| * |
| * Module: library/pkcs12.c |
| * Caller: library/pkparse.c |
| * |
| * Requires: MBEDTLS_ASN1_PARSE_C, MBEDTLS_CIPHER_C, MBEDTLS_MD_C |
| * Can use: MBEDTLS_ARC4_C |
| * |
| * This module enables PKCS#12 functions. |
| */ |
| #define MBEDTLS_PKCS12_C |
| |
| /** |
| * \def MBEDTLS_PLATFORM_C |
| * |
| * Enable the platform abstraction layer that allows you to re-assign |
| * functions like calloc(), free(), snprintf(), printf(), fprintf(), exit(). |
| * |
| * Enabling MBEDTLS_PLATFORM_C enables to use of MBEDTLS_PLATFORM_XXX_ALT |
| * or MBEDTLS_PLATFORM_XXX_MACRO directives, allowing the functions mentioned |
| * above to be specified at runtime or compile time respectively. |
| * |
| * \note This abstraction layer must be enabled on Windows (including MSYS2) |
| * as other module rely on it for a fixed snprintf implementation. |
| * |
| * Module: library/platform.c |
| * Caller: Most other .c files |
| * |
| * This module enables abstraction of common (libc) functions. |
| */ |
| #define MBEDTLS_PLATFORM_C |
| |
| /** |
| * \def MBEDTLS_RIPEMD160_C |
| * |
| * Enable the RIPEMD-160 hash algorithm. |
| * |
| * Module: library/mbedtls_ripemd160.c |
| * Caller: library/mbedtls_md.c |
| * |
| */ |
| #define MBEDTLS_RIPEMD160_C |
| |
| /** |
| * \def MBEDTLS_RSA_C |
| * |
| * Enable the RSA public-key cryptosystem. |
| * |
| * Module: library/rsa.c |
| * Caller: library/ssl_cli.c |
| * library/ssl_srv.c |
| * library/ssl_tls.c |
| * library/x509.c |
| * |
| * This module is used by the following key exchanges: |
| * RSA, DHE-RSA, ECDHE-RSA, RSA-PSK |
| * |
| * Requires: MBEDTLS_BIGNUM_C, MBEDTLS_OID_C |
| */ |
| #define MBEDTLS_RSA_C |
| |
| /** |
| * \def MBEDTLS_SHA1_C |
| * |
| * Enable the SHA1 cryptographic hash algorithm. |
| * |
| * Module: library/mbedtls_sha1.c |
| * Caller: library/mbedtls_md.c |
| * library/ssl_cli.c |
| * library/ssl_srv.c |
| * library/ssl_tls.c |
| * library/x509write_crt.c |
| * |
| * This module is required for SSL/TLS and SHA1-signed certificates. |
| */ |
| #define MBEDTLS_SHA1_C |
| |
| /** |
| * \def MBEDTLS_SHA256_C |
| * |
| * Enable the SHA-224 and SHA-256 cryptographic hash algorithms. |
| * |
| * Module: library/mbedtls_sha256.c |
| * Caller: library/entropy.c |
| * library/mbedtls_md.c |
| * library/ssl_cli.c |
| * library/ssl_srv.c |
| * library/ssl_tls.c |
| * |
| * This module adds support for SHA-224 and SHA-256. |
| * This module is required for the SSL/TLS 1.2 PRF function. |
| */ |
| #define MBEDTLS_SHA256_C |
| |
| /** |
| * \def MBEDTLS_SHA512_C |
| * |
| * Enable the SHA-384 and SHA-512 cryptographic hash algorithms. |
| * |
| * Module: library/mbedtls_sha512.c |
| * Caller: library/entropy.c |
| * library/mbedtls_md.c |
| * library/ssl_cli.c |
| * library/ssl_srv.c |
| * |
| * This module adds support for SHA-384 and SHA-512. |
| */ |
| #define MBEDTLS_SHA512_C |
| |
| /** |
| * \def MBEDTLS_SSL_CACHE_C |
| * |
| * Enable simple SSL cache implementation. |
| * |
| * Module: library/ssl_cache.c |
| * Caller: |
| * |
| * Requires: MBEDTLS_SSL_CACHE_C |
| */ |
| #define MBEDTLS_SSL_CACHE_C |
| |
| /** |
| * \def MBEDTLS_SSL_COOKIE_C |
| * |
| * Enable basic implementation of DTLS cookies for hello verification. |
| * |
| * Module: library/ssl_cookie.c |
| * Caller: |
| */ |
| #define MBEDTLS_SSL_COOKIE_C |
| |
| /** |
| * \def MBEDTLS_SSL_TICKET_C |
| * |
| * Enable an implementation of TLS server-side callbacks for session tickets. |
| * |
| * Module: library/ssl_ticket.c |
| * Caller: |
| * |
| * Requires: MBEDTLS_CIPHER_C |
| */ |
| #define MBEDTLS_SSL_TICKET_C |
| |
| /** |
| * \def MBEDTLS_SSL_CLI_C |
| * |
| * Enable the SSL/TLS client code. |
| * |
| * Module: library/ssl_cli.c |
| * Caller: |
| * |
| * Requires: MBEDTLS_SSL_TLS_C |
| * |
| * This module is required for SSL/TLS client support. |
| */ |
| #define MBEDTLS_SSL_CLI_C |
| |
| /** |
| * \def MBEDTLS_SSL_SRV_C |
| * |
| * Enable the SSL/TLS server code. |
| * |
| * Module: library/ssl_srv.c |
| * Caller: |
| * |
| * Requires: MBEDTLS_SSL_TLS_C |
| * |
| * This module is required for SSL/TLS server support. |
| */ |
| #define MBEDTLS_SSL_SRV_C |
| |
| /** |
| * \def MBEDTLS_SSL_TLS_C |
| * |
| * Enable the generic SSL/TLS code. |
| * |
| * Module: library/ssl_tls.c |
| * Caller: library/ssl_cli.c |
| * library/ssl_srv.c |
| * |
| * Requires: MBEDTLS_CIPHER_C, MBEDTLS_MD_C |
| * and at least one of the MBEDTLS_SSL_PROTO_XXX defines |
| * |
| * This module is required for SSL/TLS. |
| */ |
| #define MBEDTLS_SSL_TLS_C |
| |
| /** |
| * \def MBEDTLS_THREADING_C |
| * |
| * Enable the threading abstraction layer. |
| * By default mbed TLS assumes it is used in a non-threaded environment or that |
| * contexts are not shared between threads. If you do intend to use contexts |
| * between threads, you will need to enable this layer to prevent race |
| * conditions. See also our Knowledge Base article about threading: |
| * https://tls.mbed.org/kb/development/thread-safety-and-multi-threading |
| * |
| * Module: library/threading.c |
| * |
| * This allows different threading implementations (self-implemented or |
| * provided). |
| * |
| * You will have to enable either MBEDTLS_THREADING_ALT or |
| * MBEDTLS_THREADING_PTHREAD. |
| * |
| * Enable this layer to allow use of mutexes within mbed TLS |
| */ |
| //#define MBEDTLS_THREADING_C |
| |
| /** |
| * \def MBEDTLS_TIMING_C |
| * |
| * Enable the semi-portable timing interface. |
| * |
| * \note The provided implementation only works on POSIX/Unix (including Linux, |
| * BSD and OS X) and Windows. On other platforms, you can either disable that |
| * module and provide your own implementations of the callbacks needed by |
| * \c mbedtls_ssl_set_timer_cb() for DTLS, or leave it enabled and provide |
| * your own implementation of the whole module by setting |
| * \c MBEDTLS_TIMING_ALT in the current file. |
| * |
| * \note See also our Knowledge Base article about porting to a new |
| * environment: |
| * https://tls.mbed.org/kb/how-to/how-do-i-port-mbed-tls-to-a-new-environment-OS |
| * |
| * Module: library/timing.c |
| * Caller: library/havege.c |
| * |
| * This module is used by the HAVEGE random number generator. |
| */ |
| #define MBEDTLS_TIMING_C |
| |
| /** |
| * \def MBEDTLS_VERSION_C |
| * |
| * Enable run-time version information. |
| * |
| * Module: library/version.c |
| * |
| * This module provides run-time version information. |
| */ |
| #define MBEDTLS_VERSION_C |
| |
| /** |
| * \def MBEDTLS_X509_USE_C |
| * |
| * Enable X.509 core for using certificates. |
| * |
| * Module: library/x509.c |
| * Caller: library/mbedtls_x509_crl.c |
| * library/mbedtls_x509_crt.c |
| * library/mbedtls_x509_csr.c |
| * |
| * Requires: MBEDTLS_ASN1_PARSE_C, MBEDTLS_BIGNUM_C, MBEDTLS_OID_C, |
| * MBEDTLS_PK_PARSE_C |
| * |
| * This module is required for the X.509 parsing modules. |
| */ |
| #define MBEDTLS_X509_USE_C |
| |
| /** |
| * \def MBEDTLS_X509_CRT_PARSE_C |
| * |
| * Enable X.509 certificate parsing. |
| * |
| * Module: library/mbedtls_x509_crt.c |
| * Caller: library/ssl_cli.c |
| * library/ssl_srv.c |
| * library/ssl_tls.c |
| * |
| * Requires: MBEDTLS_X509_USE_C |
| * |
| * This module is required for X.509 certificate parsing. |
| */ |
| #define MBEDTLS_X509_CRT_PARSE_C |
| |
| /** |
| * \def MBEDTLS_X509_CRL_PARSE_C |
| * |
| * Enable X.509 CRL parsing. |
| * |
| * Module: library/mbedtls_x509_crl.c |
| * Caller: library/mbedtls_x509_crt.c |
| * |
| * Requires: MBEDTLS_X509_USE_C |
| * |
| * This module is required for X.509 CRL parsing. |
| */ |
| #define MBEDTLS_X509_CRL_PARSE_C |
| |
| /** |
| * \def MBEDTLS_X509_CSR_PARSE_C |
| * |
| * Enable X.509 Certificate Signing Request (CSR) parsing. |
| * |
| * Module: library/mbedtls_x509_csr.c |
| * Caller: library/x509_crt_write.c |
| * |
| * Requires: MBEDTLS_X509_USE_C |
| * |
| * This module is used for reading X.509 certificate request. |
| */ |
| #define MBEDTLS_X509_CSR_PARSE_C |
| |
| /** |
| * \def MBEDTLS_X509_CREATE_C |
| * |
| * Enable X.509 core for creating certificates. |
| * |
| * Module: library/x509_create.c |
| * |
| * Requires: MBEDTLS_BIGNUM_C, MBEDTLS_OID_C, MBEDTLS_PK_WRITE_C |
| * |
| * This module is the basis for creating X.509 certificates and CSRs. |
| */ |
| #define MBEDTLS_X509_CREATE_C |
| |
| /** |
| * \def MBEDTLS_X509_CRT_WRITE_C |
| * |
| * Enable creating X.509 certificates. |
| * |
| * Module: library/x509_crt_write.c |
| * |
| * Requires: MBEDTLS_X509_CREATE_C |
| * |
| * This module is required for X.509 certificate creation. |
| */ |
| #define MBEDTLS_X509_CRT_WRITE_C |
| |
| /** |
| * \def MBEDTLS_X509_CSR_WRITE_C |
| * |
| * Enable creating X.509 Certificate Signing Requests (CSR). |
| * |
| * Module: library/x509_csr_write.c |
| * |
| * Requires: MBEDTLS_X509_CREATE_C |
| * |
| * This module is required for X.509 certificate request writing. |
| */ |
| #define MBEDTLS_X509_CSR_WRITE_C |
| |
| /** |
| * \def MBEDTLS_XTEA_C |
| * |
| * Enable the XTEA block cipher. |
| * |
| * Module: library/xtea.c |
| * Caller: |
| */ |
| #define MBEDTLS_XTEA_C |
| |
| /* \} name SECTION: mbed TLS modules */ |
| |
| /** |
| * \name SECTION: Module configuration options |
| * |
| * This section allows for the setting of module specific sizes and |
| * configuration options. The default values are already present in the |
| * relevant header files and should suffice for the regular use cases. |
| * |
| * Our advice is to enable options and change their values here |
| * only if you have a good reason and know the consequences. |
| * |
| * Please check the respective header file for documentation on these |
| * parameters (to prevent duplicate documentation). |
| * \{ |
| */ |
| |
| /* MPI / BIGNUM options */ |
| //#define MBEDTLS_MPI_WINDOW_SIZE 6 /**< Maximum windows size used. */ |
| //#define MBEDTLS_MPI_MAX_SIZE 1024 /**< Maximum number of bytes for usable MPIs. */ |
| |
| /* CTR_DRBG options */ |
| //#define MBEDTLS_CTR_DRBG_ENTROPY_LEN 48 /**< Amount of entropy used per seed by default (48 with SHA-512, 32 with SHA-256) */ |
| //#define MBEDTLS_CTR_DRBG_RESEED_INTERVAL 10000 /**< Interval before reseed is performed by default */ |
| //#define MBEDTLS_CTR_DRBG_MAX_INPUT 256 /**< Maximum number of additional input bytes */ |
| //#define MBEDTLS_CTR_DRBG_MAX_REQUEST 1024 /**< Maximum number of requested bytes per call */ |
| //#define MBEDTLS_CTR_DRBG_MAX_SEED_INPUT 384 /**< Maximum size of (re)seed buffer */ |
| |
| /* HMAC_DRBG options */ |
| //#define MBEDTLS_HMAC_DRBG_RESEED_INTERVAL 10000 /**< Interval before reseed is performed by default */ |
| //#define MBEDTLS_HMAC_DRBG_MAX_INPUT 256 /**< Maximum number of additional input bytes */ |
| //#define MBEDTLS_HMAC_DRBG_MAX_REQUEST 1024 /**< Maximum number of requested bytes per call */ |
| //#define MBEDTLS_HMAC_DRBG_MAX_SEED_INPUT 384 /**< Maximum size of (re)seed buffer */ |
| |
| /* ECP options */ |
| //#define MBEDTLS_ECP_MAX_BITS 521 /**< Maximum bit size of groups */ |
| //#define MBEDTLS_ECP_WINDOW_SIZE 6 /**< Maximum window size used */ |
| //#define MBEDTLS_ECP_FIXED_POINT_OPTIM 1 /**< Enable fixed-point speed-up */ |
| |
| /* Entropy options */ |
| //#define MBEDTLS_ENTROPY_MAX_SOURCES 20 /**< Maximum number of sources supported */ |
| //#define MBEDTLS_ENTROPY_MAX_GATHER 128 /**< Maximum amount requested from entropy sources */ |
| |
| /* Memory buffer allocator options */ |
| //#define MBEDTLS_MEMORY_ALIGN_MULTIPLE 4 /**< Align on multiples of this value */ |
| |
| /* Platform options */ |
| //#define MBEDTLS_PLATFORM_STD_MEM_HDR <stdlib.h> /**< Header to include if MBEDTLS_PLATFORM_NO_STD_FUNCTIONS is defined. Don't define if no header is needed. */ |
| //#define MBEDTLS_PLATFORM_STD_CALLOC calloc /**< Default allocator to use, can be undefined */ |
| //#define MBEDTLS_PLATFORM_STD_FREE free /**< Default free to use, can be undefined */ |
| //#define MBEDTLS_PLATFORM_STD_EXIT exit /**< Default exit to use, can be undefined */ |
| //#define MBEDTLS_PLATFORM_STD_FPRINTF fprintf /**< Default fprintf to use, can be undefined */ |
| //#define MBEDTLS_PLATFORM_STD_PRINTF printf /**< Default printf to use, can be undefined */ |
| /* Note: your snprintf must correclty zero-terminate the buffer! */ |
| //#define MBEDTLS_PLATFORM_STD_SNPRINTF snprintf /**< Default snprintf to use, can be undefined */ |
| //#define MBEDTLS_PLATFORM_STD_EXIT_SUCCESS 0 /**< Default exit value to use, can be undefined */ |
| //#define MBEDTLS_PLATFORM_STD_EXIT_FAILURE 1 /**< Default exit value to use, can be undefined */ |
| |
| /* To Use Function Macros MBEDTLS_PLATFORM_C must be enabled */ |
| /* MBEDTLS_PLATFORM_XXX_MACRO and MBEDTLS_PLATFORM_XXX_ALT cannot both be defined */ |
| //#define MBEDTLS_PLATFORM_CALLOC_MACRO calloc /**< Default allocator macro to use, can be undefined */ |
| //#define MBEDTLS_PLATFORM_FREE_MACRO free /**< Default free macro to use, can be undefined */ |
| //#define MBEDTLS_PLATFORM_EXIT_MACRO exit /**< Default exit macro to use, can be undefined */ |
| //#define MBEDTLS_PLATFORM_FPRINTF_MACRO fprintf /**< Default fprintf macro to use, can be undefined */ |
| //#define MBEDTLS_PLATFORM_PRINTF_MACRO printf /**< Default printf macro to use, can be undefined */ |
| /* Note: your snprintf must correclty zero-terminate the buffer! */ |
| //#define MBEDTLS_PLATFORM_SNPRINTF_MACRO snprintf /**< Default snprintf macro to use, can be undefined */ |
| |
| /* SSL Cache options */ |
| //#define MBEDTLS_SSL_CACHE_DEFAULT_TIMEOUT 86400 /**< 1 day */ |
| //#define MBEDTLS_SSL_CACHE_DEFAULT_MAX_ENTRIES 50 /**< Maximum entries in cache */ |
| |
| /* SSL options */ |
| //#define MBEDTLS_SSL_MAX_CONTENT_LEN 16384 /**< Maxium fragment length in bytes, determines the size of each of the two internal I/O buffers */ |
| //#define MBEDTLS_SSL_DEFAULT_TICKET_LIFETIME 86400 /**< Lifetime of session tickets (if enabled) */ |
| //#define MBEDTLS_PSK_MAX_LEN 32 /**< Max size of TLS pre-shared keys, in bytes (default 256 bits) */ |
| //#define MBEDTLS_SSL_COOKIE_TIMEOUT 60 /**< Default expiration delay of DTLS cookies, in seconds if HAVE_TIME, or in number of cookies issued */ |
| |
| /** |
| * Complete list of ciphersuites to use, in order of preference. |
| * |
| * \warning No dependency checking is done on that field! This option can only |
| * be used to restrict the set of available ciphersuites. It is your |
| * responsibility to make sure the needed modules are active. |
| * |
| * Use this to save a few hundred bytes of ROM (default ordering of all |
| * available ciphersuites) and a few to a few hundred bytes of RAM. |
| * |
| * The value below is only an example, not the default. |
| */ |
| //#define MBEDTLS_SSL_CIPHERSUITES MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 |
| |
| /* X509 options */ |
| //#define MBEDTLS_X509_MAX_INTERMEDIATE_CA 8 /**< Maximum number of intermediate CAs in a verification chain. */ |
| |
| /* \} name SECTION: Module configuration options */ |
| |
| #if defined(TARGET_LIKE_MBED) |
| #include "mbedtls/target_config.h" |
| #endif |
| |
| /* |
| * Allow user to override any previous default. |
| * |
| * Use two macro names for that, as: |
| * - with yotta the prefix YOTTA_CFG_ is forced |
| * - without yotta is looks weird to have a YOTTA prefix. |
| */ |
| #if defined(YOTTA_CFG_MBEDTLS_USER_CONFIG_FILE) |
| #include YOTTA_CFG_MBEDTLS_USER_CONFIG_FILE |
| #elif defined(MBEDTLS_USER_CONFIG_FILE) |
| #include MBEDTLS_USER_CONFIG_FILE |
| #endif |
| |
| #include "check_config.h" |
| |
| #endif /* MBEDTLS_CONFIG_H */ |