| #!/bin/sh |
| |
| # Test various options that are not covered by compat.sh |
| # |
| # Here the goal is not to cover every ciphersuite/version, but |
| # rather specific options (max fragment length, truncated hmac, etc) |
| # or procedures (session resumption from cache or ticket, renego, etc). |
| # |
| # Assumes all options are compiled in. |
| |
| set -u |
| |
| # test if it is defined from the environment before assining default |
| # if yes, assume it means it's a build with all the options we need (SSLv2) |
| if [ -n "${OPENSSL_CMD:-}" ]; then |
| OPENSSL_OK=1 |
| else |
| OPENSSL_OK=0 |
| fi |
| |
| # default values, can be overriden by the environment |
| : ${P_SRV:=../programs/ssl/ssl_server2} |
| : ${P_CLI:=../programs/ssl/ssl_client2} |
| : ${OPENSSL_CMD:=openssl} # OPENSSL would conflict with the build system |
| |
| O_SRV="$OPENSSL_CMD s_server -www -cert data_files/server5.crt -key data_files/server5.key" |
| O_CLI="echo 'GET / HTTP/1.0' | $OPENSSL_CMD s_client" |
| |
| TESTS=0 |
| FAILS=0 |
| |
| CONFIG_H='../include/polarssl/config.h' |
| |
| MEMCHECK=0 |
| FILTER='.*' |
| if [ "$OPENSSL_OK" -gt 0 ]; then |
| EXCLUDE='^$' |
| else |
| EXCLUDE='SSLv2' |
| fi |
| |
| print_usage() { |
| echo "Usage: $0 [options]" |
| echo -e " -h|--help\tPrint this help." |
| echo -e " -m|--memcheck\tCheck memory leaks and errors." |
| echo -e " -f|--filter\tOnly matching tests are executed (default: '$FILTER')" |
| echo -e " -e|--exclude\tMatching tests are excluded (default: '$EXCLUDE')" |
| } |
| |
| get_options() { |
| while [ $# -gt 0 ]; do |
| case "$1" in |
| -f|--filter) |
| shift; FILTER=$1 |
| ;; |
| -e|--exclude) |
| shift; EXCLUDE=$1 |
| ;; |
| -m|--memcheck) |
| MEMCHECK=1 |
| ;; |
| -h|--help) |
| print_usage |
| exit 0 |
| ;; |
| *) |
| echo "Unkown argument: '$1'" |
| print_usage |
| exit 1 |
| ;; |
| esac |
| shift |
| done |
| } |
| |
| # print_name <name> |
| print_name() { |
| echo -n "$1 " |
| LEN=`echo "$1" | wc -c` |
| LEN=`echo 72 - $LEN | bc` |
| for i in `seq 1 $LEN`; do echo -n '.'; done |
| echo -n ' ' |
| |
| TESTS=`echo $TESTS + 1 | bc` |
| } |
| |
| # fail <message> |
| fail() { |
| echo "FAIL" |
| echo " ! $1" |
| |
| cp srv_out o-srv-${TESTS}.log |
| cp cli_out o-cli-${TESTS}.log |
| echo " ! outputs saved to o-srv-${TESTS}.log and o-cli-${TESTS}.log" |
| |
| FAILS=`echo $FAILS + 1 | bc` |
| } |
| |
| # is_polar <cmd_line> |
| is_polar() { |
| echo "$1" | grep 'ssl_server2\|ssl_client2' > /dev/null |
| } |
| |
| # has_mem_err <log_file_name> |
| has_mem_err() { |
| if ( grep -F 'All heap blocks were freed -- no leaks are possible' "$1" && |
| grep -F 'ERROR SUMMARY: 0 errors from 0 contexts' "$1" ) > /dev/null |
| then |
| return 1 # false: does not have errors |
| else |
| return 0 # true: has errors |
| fi |
| } |
| |
| # Usage: run_test name srv_cmd cli_cmd cli_exit [option [...]] |
| # Options: -s pattern pattern that must be present in server output |
| # -c pattern pattern that must be present in client output |
| # -S pattern pattern that must be absent in server output |
| # -C pattern pattern that must be absent in client output |
| run_test() { |
| NAME="$1" |
| SRV_CMD="$2" |
| CLI_CMD="$3" |
| CLI_EXPECT="$4" |
| shift 4 |
| |
| if echo "$NAME" | grep "$FILTER" | grep -v "$EXCLUDE" >/dev/null; then : |
| else |
| return |
| fi |
| |
| print_name "$NAME" |
| |
| # prepend valgrind to our commands if active |
| if [ "$MEMCHECK" -gt 0 ]; then |
| if is_polar "$SRV_CMD"; then |
| SRV_CMD="valgrind --leak-check=full $SRV_CMD" |
| fi |
| if is_polar "$CLI_CMD"; then |
| CLI_CMD="valgrind --leak-check=full $CLI_CMD" |
| fi |
| fi |
| |
| # run the commands |
| echo "$SRV_CMD" > srv_out |
| $SRV_CMD >> srv_out 2>&1 & |
| SRV_PID=$! |
| sleep 1 |
| echo "$CLI_CMD" > cli_out |
| eval "$CLI_CMD" >> cli_out 2>&1 |
| CLI_EXIT=$? |
| echo "EXIT: $CLI_EXIT" >> cli_out |
| |
| # psk is usefull when server only has bad certs |
| if is_polar "$SRV_CMD"; then |
| "$P_CLI" request_page=SERVERQUIT tickets=0 auth_mode=none psk=abc123 \ |
| crt_file=data_files/cli2.crt key_file=data_files/cli2.key \ |
| >/dev/null |
| else |
| kill $SRV_PID |
| fi |
| wait $SRV_PID |
| |
| # check if the client and server went at least to the handshake stage |
| # (usefull to avoid tests with only negative assertions and non-zero |
| # expected client exit to incorrectly succeed in case of catastrophic |
| # failure) |
| if is_polar "$SRV_CMD"; then |
| if grep "Performing the SSL/TLS handshake" srv_out >/dev/null; then :; |
| else |
| fail "server failed to start" |
| return |
| fi |
| fi |
| if is_polar "$CLI_CMD"; then |
| if grep "Performing the SSL/TLS handshake" cli_out >/dev/null; then :; |
| else |
| fail "client failed to start" |
| return |
| fi |
| fi |
| |
| # check server exit code |
| if [ $? != 0 ]; then |
| fail "server fail" |
| return |
| fi |
| |
| # check client exit code |
| if [ \( "$CLI_EXPECT" = 0 -a "$CLI_EXIT" != 0 \) -o \ |
| \( "$CLI_EXPECT" != 0 -a "$CLI_EXIT" = 0 \) ] |
| then |
| fail "bad client exit code" |
| return |
| fi |
| |
| # check other assertions |
| while [ $# -gt 0 ] |
| do |
| case $1 in |
| "-s") |
| if grep "$2" srv_out >/dev/null; then :; else |
| fail "-s $2" |
| return |
| fi |
| ;; |
| |
| "-c") |
| if grep "$2" cli_out >/dev/null; then :; else |
| fail "-c $2" |
| return |
| fi |
| ;; |
| |
| "-S") |
| if grep "$2" srv_out >/dev/null; then |
| fail "-S $2" |
| return |
| fi |
| ;; |
| |
| "-C") |
| if grep "$2" cli_out >/dev/null; then |
| fail "-C $2" |
| return |
| fi |
| ;; |
| |
| *) |
| echo "Unkown test: $1" >&2 |
| exit 1 |
| esac |
| shift 2 |
| done |
| |
| # check valgrind's results |
| if [ "$MEMCHECK" -gt 0 ]; then |
| if is_polar "$SRV_CMD" && has_mem_err srv_out; then |
| fail "Server has memory errors" |
| return |
| fi |
| if is_polar "$CLI_CMD" && has_mem_err cli_out; then |
| fail "Client has memory errors" |
| return |
| fi |
| fi |
| |
| # if we're here, everything is ok |
| echo "PASS" |
| rm -f srv_out cli_out |
| } |
| |
| cleanup() { |
| rm -f cli_out srv_out sess |
| kill $SRV_PID |
| exit 1 |
| } |
| |
| # |
| # MAIN |
| # |
| |
| get_options "$@" |
| |
| # sanity checks, avoid an avalanche of errors |
| if [ ! -x "$P_SRV" ]; then |
| echo "Command '$P_SRV' is not an executable file" |
| exit 1 |
| fi |
| if [ ! -x "$P_CLI" ]; then |
| echo "Command '$P_CLI' is not an executable file" |
| exit 1 |
| fi |
| if which $OPENSSL_CMD >/dev/null 2>&1; then :; else |
| echo "Command '$OPENSSL_CMD' not found" |
| exit 1 |
| fi |
| |
| killall -q openssl ssl_server ssl_server2 |
| trap cleanup INT TERM HUP |
| |
| # Test for SSLv2 ClientHello |
| |
| run_test "SSLv2 ClientHello #0 (reference)" \ |
| "$P_SRV debug_level=3" \ |
| "$O_CLI -no_ssl2" \ |
| 0 \ |
| -S "parse client hello v2" \ |
| -S "ssl_handshake returned" |
| |
| # Adding a SSL2-only suite makes OpenSSL client send SSLv2 ClientHello |
| run_test "SSLv2 ClientHello #1 (actual test)" \ |
| "$P_SRV debug_level=3" \ |
| "$O_CLI -cipher 'DES-CBC-MD5:ALL'" \ |
| 0 \ |
| -s "parse client hello v2" \ |
| -S "ssl_handshake returned" |
| |
| # Tests for Truncated HMAC extension |
| |
| run_test "Truncated HMAC #0" \ |
| "$P_SRV debug_level=5" \ |
| "$P_CLI trunc_hmac=0 force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \ |
| 0 \ |
| -s "dumping 'computed mac' (20 bytes)" |
| |
| run_test "Truncated HMAC #1" \ |
| "$P_SRV debug_level=5" \ |
| "$P_CLI trunc_hmac=1 force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \ |
| 0 \ |
| -s "dumping 'computed mac' (10 bytes)" |
| |
| # Tests for Session Tickets |
| |
| run_test "Session resume using tickets #1 (basic)" \ |
| "$P_SRV debug_level=4 tickets=1" \ |
| "$P_CLI debug_level=4 tickets=1 reconnect=1" \ |
| 0 \ |
| -c "client hello, adding session ticket extension" \ |
| -s "found session ticket extension" \ |
| -s "server hello, adding session ticket extension" \ |
| -c "found session_ticket extension" \ |
| -c "parse new session ticket" \ |
| -S "session successfully restored from cache" \ |
| -s "session successfully restored from ticket" \ |
| -s "a session has been resumed" \ |
| -c "a session has been resumed" |
| |
| run_test "Session resume using tickets #2 (cache disabled)" \ |
| "$P_SRV debug_level=4 tickets=1 cache_max=0" \ |
| "$P_CLI debug_level=4 tickets=1 reconnect=1" \ |
| 0 \ |
| -c "client hello, adding session ticket extension" \ |
| -s "found session ticket extension" \ |
| -s "server hello, adding session ticket extension" \ |
| -c "found session_ticket extension" \ |
| -c "parse new session ticket" \ |
| -S "session successfully restored from cache" \ |
| -s "session successfully restored from ticket" \ |
| -s "a session has been resumed" \ |
| -c "a session has been resumed" |
| |
| run_test "Session resume using tickets #3 (timeout)" \ |
| "$P_SRV debug_level=4 tickets=1 cache_max=0 ticket_timeout=1" \ |
| "$P_CLI debug_level=4 tickets=1 reconnect=1 reco_delay=2" \ |
| 0 \ |
| -c "client hello, adding session ticket extension" \ |
| -s "found session ticket extension" \ |
| -s "server hello, adding session ticket extension" \ |
| -c "found session_ticket extension" \ |
| -c "parse new session ticket" \ |
| -S "session successfully restored from cache" \ |
| -S "session successfully restored from ticket" \ |
| -S "a session has been resumed" \ |
| -C "a session has been resumed" |
| |
| run_test "Session resume using tickets #4 (openssl server)" \ |
| "$O_SRV" \ |
| "$P_CLI debug_level=4 tickets=1 reconnect=1" \ |
| 0 \ |
| -c "client hello, adding session ticket extension" \ |
| -c "found session_ticket extension" \ |
| -c "parse new session ticket" \ |
| -c "a session has been resumed" |
| |
| run_test "Session resume using tickets #5 (openssl client)" \ |
| "$P_SRV debug_level=4 tickets=1" \ |
| "($O_CLI -sess_out sess; $O_CLI -sess_in sess; rm -f sess)" \ |
| 0 \ |
| -s "found session ticket extension" \ |
| -s "server hello, adding session ticket extension" \ |
| -S "session successfully restored from cache" \ |
| -s "session successfully restored from ticket" \ |
| -s "a session has been resumed" |
| |
| # Tests for Session Resume based on session-ID and cache |
| |
| run_test "Session resume using cache #1 (tickets enabled on client)" \ |
| "$P_SRV debug_level=4 tickets=0" \ |
| "$P_CLI debug_level=4 tickets=1 reconnect=1" \ |
| 0 \ |
| -c "client hello, adding session ticket extension" \ |
| -s "found session ticket extension" \ |
| -S "server hello, adding session ticket extension" \ |
| -C "found session_ticket extension" \ |
| -C "parse new session ticket" \ |
| -s "session successfully restored from cache" \ |
| -S "session successfully restored from ticket" \ |
| -s "a session has been resumed" \ |
| -c "a session has been resumed" |
| |
| run_test "Session resume using cache #2 (tickets enabled on server)" \ |
| "$P_SRV debug_level=4 tickets=1" \ |
| "$P_CLI debug_level=4 tickets=0 reconnect=1" \ |
| 0 \ |
| -C "client hello, adding session ticket extension" \ |
| -S "found session ticket extension" \ |
| -S "server hello, adding session ticket extension" \ |
| -C "found session_ticket extension" \ |
| -C "parse new session ticket" \ |
| -s "session successfully restored from cache" \ |
| -S "session successfully restored from ticket" \ |
| -s "a session has been resumed" \ |
| -c "a session has been resumed" |
| |
| run_test "Session resume using cache #3 (cache_max=0)" \ |
| "$P_SRV debug_level=4 tickets=0 cache_max=0" \ |
| "$P_CLI debug_level=4 tickets=0 reconnect=1" \ |
| 0 \ |
| -S "session successfully restored from cache" \ |
| -S "session successfully restored from ticket" \ |
| -S "a session has been resumed" \ |
| -C "a session has been resumed" |
| |
| run_test "Session resume using cache #4 (cache_max=1)" \ |
| "$P_SRV debug_level=4 tickets=0 cache_max=1" \ |
| "$P_CLI debug_level=4 tickets=0 reconnect=1" \ |
| 0 \ |
| -s "session successfully restored from cache" \ |
| -S "session successfully restored from ticket" \ |
| -s "a session has been resumed" \ |
| -c "a session has been resumed" |
| |
| run_test "Session resume using cache #5 (timemout > delay)" \ |
| "$P_SRV debug_level=4 tickets=0" \ |
| "$P_CLI debug_level=4 tickets=0 reconnect=1 reco_delay=0" \ |
| 0 \ |
| -s "session successfully restored from cache" \ |
| -S "session successfully restored from ticket" \ |
| -s "a session has been resumed" \ |
| -c "a session has been resumed" |
| |
| run_test "Session resume using cache #6 (timeout < delay)" \ |
| "$P_SRV debug_level=4 tickets=0 cache_timeout=1" \ |
| "$P_CLI debug_level=4 tickets=0 reconnect=1 reco_delay=2" \ |
| 0 \ |
| -S "session successfully restored from cache" \ |
| -S "session successfully restored from ticket" \ |
| -S "a session has been resumed" \ |
| -C "a session has been resumed" |
| |
| run_test "Session resume using cache #7 (no timeout)" \ |
| "$P_SRV debug_level=4 tickets=0 cache_timeout=0" \ |
| "$P_CLI debug_level=4 tickets=0 reconnect=1 reco_delay=2" \ |
| 0 \ |
| -s "session successfully restored from cache" \ |
| -S "session successfully restored from ticket" \ |
| -s "a session has been resumed" \ |
| -c "a session has been resumed" |
| |
| run_test "Session resume using cache #8 (openssl client)" \ |
| "$P_SRV debug_level=4 tickets=0" \ |
| "($O_CLI -sess_out sess; $O_CLI -sess_in sess; rm -f sess)" \ |
| 0 \ |
| -s "found session ticket extension" \ |
| -S "server hello, adding session ticket extension" \ |
| -s "session successfully restored from cache" \ |
| -S "session successfully restored from ticket" \ |
| -s "a session has been resumed" |
| |
| run_test "Session resume using cache #9 (openssl server)" \ |
| "$O_SRV" \ |
| "$P_CLI debug_level=4 tickets=0 reconnect=1" \ |
| 0 \ |
| -C "found session_ticket extension" \ |
| -C "parse new session ticket" \ |
| -c "a session has been resumed" |
| |
| # Tests for Max Fragment Length extension |
| |
| run_test "Max fragment length #1" \ |
| "$P_SRV debug_level=4" \ |
| "$P_CLI debug_level=4" \ |
| 0 \ |
| -C "client hello, adding max_fragment_length extension" \ |
| -S "found max fragment length extension" \ |
| -S "server hello, max_fragment_length extension" \ |
| -C "found max_fragment_length extension" |
| |
| run_test "Max fragment length #2" \ |
| "$P_SRV debug_level=4" \ |
| "$P_CLI debug_level=4 max_frag_len=4096" \ |
| 0 \ |
| -c "client hello, adding max_fragment_length extension" \ |
| -s "found max fragment length extension" \ |
| -s "server hello, max_fragment_length extension" \ |
| -c "found max_fragment_length extension" |
| |
| run_test "Max fragment length #3" \ |
| "$P_SRV debug_level=4 max_frag_len=4096" \ |
| "$P_CLI debug_level=4" \ |
| 0 \ |
| -C "client hello, adding max_fragment_length extension" \ |
| -S "found max fragment length extension" \ |
| -S "server hello, max_fragment_length extension" \ |
| -C "found max_fragment_length extension" |
| |
| # Tests for renegotiation |
| |
| run_test "Renegotiation #0 (none)" \ |
| "$P_SRV debug_level=4" \ |
| "$P_CLI debug_level=4" \ |
| 0 \ |
| -C "client hello, adding renegotiation extension" \ |
| -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ |
| -S "found renegotiation extension" \ |
| -s "server hello, secure renegotiation extension" \ |
| -c "found renegotiation extension" \ |
| -C "=> renegotiate" \ |
| -S "=> renegotiate" \ |
| -S "write hello request" |
| |
| run_test "Renegotiation #1 (enabled, client-initiated)" \ |
| "$P_SRV debug_level=4 renegotiation=1" \ |
| "$P_CLI debug_level=4 renegotiation=1 renegotiate=1" \ |
| 0 \ |
| -c "client hello, adding renegotiation extension" \ |
| -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ |
| -s "found renegotiation extension" \ |
| -s "server hello, secure renegotiation extension" \ |
| -c "found renegotiation extension" \ |
| -c "=> renegotiate" \ |
| -s "=> renegotiate" \ |
| -S "write hello request" |
| |
| run_test "Renegotiation #2 (enabled, server-initiated)" \ |
| "$P_SRV debug_level=4 renegotiation=1 renegotiate=1" \ |
| "$P_CLI debug_level=4 renegotiation=1" \ |
| 0 \ |
| -c "client hello, adding renegotiation extension" \ |
| -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ |
| -s "found renegotiation extension" \ |
| -s "server hello, secure renegotiation extension" \ |
| -c "found renegotiation extension" \ |
| -c "=> renegotiate" \ |
| -s "=> renegotiate" \ |
| -s "write hello request" |
| |
| run_test "Renegotiation #3 (enabled, double)" \ |
| "$P_SRV debug_level=4 renegotiation=1 renegotiate=1" \ |
| "$P_CLI debug_level=4 renegotiation=1 renegotiate=1" \ |
| 0 \ |
| -c "client hello, adding renegotiation extension" \ |
| -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ |
| -s "found renegotiation extension" \ |
| -s "server hello, secure renegotiation extension" \ |
| -c "found renegotiation extension" \ |
| -c "=> renegotiate" \ |
| -s "=> renegotiate" \ |
| -s "write hello request" |
| |
| run_test "Renegotiation #4 (client-initiated, server-rejected)" \ |
| "$P_SRV debug_level=4 renegotiation=0" \ |
| "$P_CLI debug_level=4 renegotiation=1 renegotiate=1" \ |
| 1 \ |
| -c "client hello, adding renegotiation extension" \ |
| -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ |
| -S "found renegotiation extension" \ |
| -s "server hello, secure renegotiation extension" \ |
| -c "found renegotiation extension" \ |
| -c "=> renegotiate" \ |
| -S "=> renegotiate" \ |
| -S "write hello request" |
| |
| run_test "Renegotiation #5 (server-initiated, client-rejected)" \ |
| "$P_SRV debug_level=4 renegotiation=1 renegotiate=1" \ |
| "$P_CLI debug_level=4 renegotiation=0" \ |
| 0 \ |
| -C "client hello, adding renegotiation extension" \ |
| -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ |
| -S "found renegotiation extension" \ |
| -s "server hello, secure renegotiation extension" \ |
| -c "found renegotiation extension" \ |
| -C "=> renegotiate" \ |
| -S "=> renegotiate" \ |
| -s "write hello request" \ |
| -s "SSL - An unexpected message was received from our peer" \ |
| -s "failed" |
| |
| # Tests for auth_mode |
| |
| run_test "Authentication #1 (server badcert, client required)" \ |
| "$P_SRV crt_file=data_files/server5-badsign.crt \ |
| key_file=data_files/server5.key" \ |
| "$P_CLI debug_level=2 auth_mode=required" \ |
| 1 \ |
| -c "x509_verify_cert() returned" \ |
| -c "! self-signed or not signed by a trusted CA" \ |
| -c "! ssl_handshake returned" \ |
| -c "X509 - Certificate verification failed" |
| |
| run_test "Authentication #2 (server badcert, client optional)" \ |
| "$P_SRV crt_file=data_files/server5-badsign.crt \ |
| key_file=data_files/server5.key" \ |
| "$P_CLI debug_level=2 auth_mode=optional" \ |
| 0 \ |
| -c "x509_verify_cert() returned" \ |
| -c "! self-signed or not signed by a trusted CA" \ |
| -C "! ssl_handshake returned" \ |
| -C "X509 - Certificate verification failed" |
| |
| run_test "Authentication #3 (server badcert, client none)" \ |
| "$P_SRV crt_file=data_files/server5-badsign.crt \ |
| key_file=data_files/server5.key" \ |
| "$P_CLI debug_level=2 auth_mode=none" \ |
| 0 \ |
| -C "x509_verify_cert() returned" \ |
| -C "! self-signed or not signed by a trusted CA" \ |
| -C "! ssl_handshake returned" \ |
| -C "X509 - Certificate verification failed" |
| |
| run_test "Authentication #4 (client badcert, server required)" \ |
| "$P_SRV debug_level=4 auth_mode=required" \ |
| "$P_CLI debug_level=4 crt_file=data_files/server5-badsign.crt \ |
| key_file=data_files/server5.key" \ |
| 1 \ |
| -S "skip write certificate request" \ |
| -C "skip parse certificate request" \ |
| -c "got a certificate request" \ |
| -C "skip write certificate" \ |
| -C "skip write certificate verify" \ |
| -S "skip parse certificate verify" \ |
| -s "x509_verify_cert() returned" \ |
| -S "! self-signed or not signed by a trusted CA" \ |
| -s "! ssl_handshake returned" \ |
| -c "! ssl_handshake returned" \ |
| -s "X509 - Certificate verification failed" |
| |
| run_test "Authentication #5 (client badcert, server optional)" \ |
| "$P_SRV debug_level=4 auth_mode=optional" \ |
| "$P_CLI debug_level=4 crt_file=data_files/server5-badsign.crt \ |
| key_file=data_files/server5.key" \ |
| 0 \ |
| -S "skip write certificate request" \ |
| -C "skip parse certificate request" \ |
| -c "got a certificate request" \ |
| -C "skip write certificate" \ |
| -C "skip write certificate verify" \ |
| -S "skip parse certificate verify" \ |
| -s "x509_verify_cert() returned" \ |
| -s "! self-signed or not signed by a trusted CA" \ |
| -S "! ssl_handshake returned" \ |
| -C "! ssl_handshake returned" \ |
| -S "X509 - Certificate verification failed" |
| |
| run_test "Authentication #6 (client badcert, server none)" \ |
| "$P_SRV debug_level=4 auth_mode=none" \ |
| "$P_CLI debug_level=4 crt_file=data_files/server5-badsign.crt \ |
| key_file=data_files/server5.key" \ |
| 0 \ |
| -s "skip write certificate request" \ |
| -C "skip parse certificate request" \ |
| -c "got no certificate request" \ |
| -c "skip write certificate" \ |
| -c "skip write certificate verify" \ |
| -s "skip parse certificate verify" \ |
| -S "x509_verify_cert() returned" \ |
| -S "! self-signed or not signed by a trusted CA" \ |
| -S "! ssl_handshake returned" \ |
| -C "! ssl_handshake returned" \ |
| -S "X509 - Certificate verification failed" |
| |
| run_test "Authentication #7 (client no cert, server optional)" \ |
| "$P_SRV debug_level=4 auth_mode=optional" \ |
| "$P_CLI debug_level=4 crt_file=none key_file=none" \ |
| 0 \ |
| -S "skip write certificate request" \ |
| -C "skip parse certificate request" \ |
| -c "got a certificate request" \ |
| -C "skip write certificate$" \ |
| -C "got no certificate to send" \ |
| -S "SSLv3 client has no certificate" \ |
| -c "skip write certificate verify" \ |
| -s "skip parse certificate verify" \ |
| -s "! no client certificate sent" \ |
| -S "! ssl_handshake returned" \ |
| -C "! ssl_handshake returned" \ |
| -S "X509 - Certificate verification failed" |
| |
| run_test "Authentication #8 (openssl client no cert, server optional)" \ |
| "$P_SRV debug_level=4 auth_mode=optional" \ |
| "$O_CLI" \ |
| 0 \ |
| -S "skip write certificate request" \ |
| -s "skip parse certificate verify" \ |
| -s "! no client certificate sent" \ |
| -S "! ssl_handshake returned" \ |
| -S "X509 - Certificate verification failed" |
| |
| run_test "Authentication #9 (client no cert, openssl server optional)" \ |
| "$O_SRV -verify 10" \ |
| "$P_CLI debug_level=4 crt_file=none key_file=none" \ |
| 0 \ |
| -C "skip parse certificate request" \ |
| -c "got a certificate request" \ |
| -C "skip write certificate$" \ |
| -c "skip write certificate verify" \ |
| -C "! ssl_handshake returned" |
| |
| run_test "Authentication #10 (client no cert, ssl3)" \ |
| "$P_SRV debug_level=4 auth_mode=optional force_version=ssl3" \ |
| "$P_CLI debug_level=4 crt_file=none key_file=none" \ |
| 0 \ |
| -S "skip write certificate request" \ |
| -C "skip parse certificate request" \ |
| -c "got a certificate request" \ |
| -C "skip write certificate$" \ |
| -c "skip write certificate verify" \ |
| -c "got no certificate to send" \ |
| -s "SSLv3 client has no certificate" \ |
| -s "skip parse certificate verify" \ |
| -s "! no client certificate sent" \ |
| -S "! ssl_handshake returned" \ |
| -C "! ssl_handshake returned" \ |
| -S "X509 - Certificate verification failed" |
| |
| # tests for SNI |
| |
| run_test "SNI #0 (no SNI callback)" \ |
| "$P_SRV debug_level=4 server_addr=127.0.0.1 \ |
| crt_file=data_files/server5.crt key_file=data_files/server5.key" \ |
| "$P_CLI debug_level=0 server_addr=127.0.0.1 \ |
| server_name=localhost" \ |
| 0 \ |
| -S "parse ServerName extension" \ |
| -c "issuer name *: C=NL, O=PolarSSL, CN=Polarssl Test EC CA" \ |
| -c "subject name *: C=NL, O=PolarSSL, CN=localhost" |
| |
| run_test "SNI #1 (matching cert 1)" \ |
| "$P_SRV debug_level=4 server_addr=127.0.0.1 \ |
| crt_file=data_files/server5.crt key_file=data_files/server5.key \ |
| sni=localhost,data_files/server2.crt,data_files/server2.key,polarssl.example,data_files/server1-nospace.crt,data_files/server1.key" \ |
| "$P_CLI debug_level=0 server_addr=127.0.0.1 \ |
| server_name=localhost" \ |
| 0 \ |
| -s "parse ServerName extension" \ |
| -c "issuer name *: C=NL, O=PolarSSL, CN=PolarSSL Test CA" \ |
| -c "subject name *: C=NL, O=PolarSSL, CN=localhost" |
| |
| run_test "SNI #2 (matching cert 2)" \ |
| "$P_SRV debug_level=4 server_addr=127.0.0.1 \ |
| crt_file=data_files/server5.crt key_file=data_files/server5.key \ |
| sni=localhost,data_files/server2.crt,data_files/server2.key,polarssl.example,data_files/server1-nospace.crt,data_files/server1.key" \ |
| "$P_CLI debug_level=0 server_addr=127.0.0.1 \ |
| server_name=polarssl.example" \ |
| 0 \ |
| -s "parse ServerName extension" \ |
| -c "issuer name *: C=NL, O=PolarSSL, CN=PolarSSL Test CA" \ |
| -c "subject name *: C=NL, O=PolarSSL, CN=polarssl.example" |
| |
| run_test "SNI #3 (no matching cert)" \ |
| "$P_SRV debug_level=4 server_addr=127.0.0.1 \ |
| crt_file=data_files/server5.crt key_file=data_files/server5.key \ |
| sni=localhost,data_files/server2.crt,data_files/server2.key,polarssl.example,data_files/server1-nospace.crt,data_files/server1.key" \ |
| "$P_CLI debug_level=0 server_addr=127.0.0.1 \ |
| server_name=nonesuch.example" \ |
| 1 \ |
| -s "parse ServerName extension" \ |
| -s "ssl_sni_wrapper() returned" \ |
| -s "ssl_handshake returned" \ |
| -c "ssl_handshake returned" \ |
| -c "SSL - A fatal alert message was received from our peer" |
| |
| # Tests for non-blocking I/O: exercise a variety of handshake flows |
| |
| run_test "Non-blocking I/O #1 (basic handshake)" \ |
| "$P_SRV nbio=2 tickets=0 auth_mode=none" \ |
| "$P_CLI nbio=2 tickets=0" \ |
| 0 \ |
| -S "ssl_handshake returned" \ |
| -C "ssl_handshake returned" \ |
| -c "Read from server: .* bytes read" |
| |
| run_test "Non-blocking I/O #2 (client auth)" \ |
| "$P_SRV nbio=2 tickets=0 auth_mode=required" \ |
| "$P_CLI nbio=2 tickets=0" \ |
| 0 \ |
| -S "ssl_handshake returned" \ |
| -C "ssl_handshake returned" \ |
| -c "Read from server: .* bytes read" |
| |
| run_test "Non-blocking I/O #3 (ticket)" \ |
| "$P_SRV nbio=2 tickets=1 auth_mode=none" \ |
| "$P_CLI nbio=2 tickets=1" \ |
| 0 \ |
| -S "ssl_handshake returned" \ |
| -C "ssl_handshake returned" \ |
| -c "Read from server: .* bytes read" |
| |
| run_test "Non-blocking I/O #4 (ticket + client auth)" \ |
| "$P_SRV nbio=2 tickets=1 auth_mode=required" \ |
| "$P_CLI nbio=2 tickets=1" \ |
| 0 \ |
| -S "ssl_handshake returned" \ |
| -C "ssl_handshake returned" \ |
| -c "Read from server: .* bytes read" |
| |
| run_test "Non-blocking I/O #5 (ticket + client auth + resume)" \ |
| "$P_SRV nbio=2 tickets=1 auth_mode=required" \ |
| "$P_CLI nbio=2 tickets=1 reconnect=1" \ |
| 0 \ |
| -S "ssl_handshake returned" \ |
| -C "ssl_handshake returned" \ |
| -c "Read from server: .* bytes read" |
| |
| run_test "Non-blocking I/O #6 (ticket + resume)" \ |
| "$P_SRV nbio=2 tickets=1 auth_mode=none" \ |
| "$P_CLI nbio=2 tickets=1 reconnect=1" \ |
| 0 \ |
| -S "ssl_handshake returned" \ |
| -C "ssl_handshake returned" \ |
| -c "Read from server: .* bytes read" |
| |
| run_test "Non-blocking I/O #7 (session-id resume)" \ |
| "$P_SRV nbio=2 tickets=0 auth_mode=none" \ |
| "$P_CLI nbio=2 tickets=0 reconnect=1" \ |
| 0 \ |
| -S "ssl_handshake returned" \ |
| -C "ssl_handshake returned" \ |
| -c "Read from server: .* bytes read" |
| |
| # Tests for version negotiation |
| |
| run_test "Version check #1 (all -> 1.2)" \ |
| "$P_SRV" \ |
| "$P_CLI" \ |
| 0 \ |
| -S "ssl_handshake returned" \ |
| -C "ssl_handshake returned" \ |
| -s "Protocol is TLSv1.2" \ |
| -c "Protocol is TLSv1.2" |
| |
| run_test "Version check #2 (cli max 1.1 -> 1.1)" \ |
| "$P_SRV" \ |
| "$P_CLI max_version=tls1_1" \ |
| 0 \ |
| -S "ssl_handshake returned" \ |
| -C "ssl_handshake returned" \ |
| -s "Protocol is TLSv1.1" \ |
| -c "Protocol is TLSv1.1" |
| |
| run_test "Version check #3 (srv max 1.1 -> 1.1)" \ |
| "$P_SRV max_version=tls1_1" \ |
| "$P_CLI" \ |
| 0 \ |
| -S "ssl_handshake returned" \ |
| -C "ssl_handshake returned" \ |
| -s "Protocol is TLSv1.1" \ |
| -c "Protocol is TLSv1.1" |
| |
| run_test "Version check #4 (cli+srv max 1.1 -> 1.1)" \ |
| "$P_SRV max_version=tls1_1" \ |
| "$P_CLI max_version=tls1_1" \ |
| 0 \ |
| -S "ssl_handshake returned" \ |
| -C "ssl_handshake returned" \ |
| -s "Protocol is TLSv1.1" \ |
| -c "Protocol is TLSv1.1" |
| |
| run_test "Version check #5 (cli max 1.1, srv min 1.1 -> 1.1)" \ |
| "$P_SRV min_version=tls1_1" \ |
| "$P_CLI max_version=tls1_1" \ |
| 0 \ |
| -S "ssl_handshake returned" \ |
| -C "ssl_handshake returned" \ |
| -s "Protocol is TLSv1.1" \ |
| -c "Protocol is TLSv1.1" |
| |
| run_test "Version check #6 (cli min 1.1, srv max 1.1 -> 1.1)" \ |
| "$P_SRV max_version=tls1_1" \ |
| "$P_CLI min_version=tls1_1" \ |
| 0 \ |
| -S "ssl_handshake returned" \ |
| -C "ssl_handshake returned" \ |
| -s "Protocol is TLSv1.1" \ |
| -c "Protocol is TLSv1.1" |
| |
| run_test "Version check #7 (cli min 1.2, srv max 1.1 -> fail)" \ |
| "$P_SRV max_version=tls1_1" \ |
| "$P_CLI min_version=tls1_2" \ |
| 1 \ |
| -s "ssl_handshake returned" \ |
| -c "ssl_handshake returned" \ |
| -c "SSL - Handshake protocol not within min/max boundaries" |
| |
| run_test "Version check #8 (srv min 1.2, cli max 1.1 -> fail)" \ |
| "$P_SRV min_version=tls1_2" \ |
| "$P_CLI max_version=tls1_1" \ |
| 1 \ |
| -s "ssl_handshake returned" \ |
| -c "ssl_handshake returned" \ |
| -s "SSL - Handshake protocol not within min/max boundaries" |
| |
| # Tests for ALPN extension |
| |
| if grep '^#define POLARSSL_SSL_ALPN' $CONFIG_H >/dev/null; then |
| |
| run_test "ALPN #0 (none)" \ |
| "$P_SRV debug_level=4" \ |
| "$P_CLI debug_level=4" \ |
| 0 \ |
| -C "client hello, adding alpn extension" \ |
| -S "found alpn extension" \ |
| -C "got an alert message, type: \\[2:120]" \ |
| -S "server hello, adding alpn extension" \ |
| -C "found alpn extension " \ |
| -C "Application Layer Protocol is" \ |
| -S "Application Layer Protocol is" |
| |
| run_test "ALPN #1 (client only)" \ |
| "$P_SRV debug_level=4" \ |
| "$P_CLI debug_level=4 alpn=abc,1234" \ |
| 0 \ |
| -c "client hello, adding alpn extension" \ |
| -s "found alpn extension" \ |
| -C "got an alert message, type: \\[2:120]" \ |
| -S "server hello, adding alpn extension" \ |
| -C "found alpn extension " \ |
| -c "Application Layer Protocol is (none)" \ |
| -S "Application Layer Protocol is" |
| |
| run_test "ALPN #2 (server only)" \ |
| "$P_SRV debug_level=4 alpn=abc,1234" \ |
| "$P_CLI debug_level=4" \ |
| 0 \ |
| -C "client hello, adding alpn extension" \ |
| -S "found alpn extension" \ |
| -C "got an alert message, type: \\[2:120]" \ |
| -S "server hello, adding alpn extension" \ |
| -C "found alpn extension " \ |
| -C "Application Layer Protocol is" \ |
| -s "Application Layer Protocol is (none)" |
| |
| run_test "ALPN #3 (both, common cli1-srv1)" \ |
| "$P_SRV debug_level=4 alpn=abc,1234" \ |
| "$P_CLI debug_level=4 alpn=abc,1234" \ |
| 0 \ |
| -c "client hello, adding alpn extension" \ |
| -s "found alpn extension" \ |
| -C "got an alert message, type: \\[2:120]" \ |
| -s "server hello, adding alpn extension" \ |
| -c "found alpn extension" \ |
| -c "Application Layer Protocol is abc" \ |
| -s "Application Layer Protocol is abc" |
| |
| run_test "ALPN #4 (both, common cli2-srv1)" \ |
| "$P_SRV debug_level=4 alpn=abc,1234" \ |
| "$P_CLI debug_level=4 alpn=1234,abc" \ |
| 0 \ |
| -c "client hello, adding alpn extension" \ |
| -s "found alpn extension" \ |
| -C "got an alert message, type: \\[2:120]" \ |
| -s "server hello, adding alpn extension" \ |
| -c "found alpn extension" \ |
| -c "Application Layer Protocol is abc" \ |
| -s "Application Layer Protocol is abc" |
| |
| run_test "ALPN #5 (both, common cli1-srv2)" \ |
| "$P_SRV debug_level=4 alpn=abc,1234" \ |
| "$P_CLI debug_level=4 alpn=1234,abcde" \ |
| 0 \ |
| -c "client hello, adding alpn extension" \ |
| -s "found alpn extension" \ |
| -C "got an alert message, type: \\[2:120]" \ |
| -s "server hello, adding alpn extension" \ |
| -c "found alpn extension" \ |
| -c "Application Layer Protocol is 1234" \ |
| -s "Application Layer Protocol is 1234" |
| |
| run_test "ALPN #6 (both, no common)" \ |
| "$P_SRV debug_level=4 alpn=abc,123" \ |
| "$P_CLI debug_level=4 alpn=1234,abcde" \ |
| 1 \ |
| -c "client hello, adding alpn extension" \ |
| -s "found alpn extension" \ |
| -c "got an alert message, type: \\[2:120]" \ |
| -S "server hello, adding alpn extension" \ |
| -C "found alpn extension" \ |
| -C "Application Layer Protocol is 1234" \ |
| -S "Application Layer Protocol is 1234" |
| |
| fi |
| |
| # Tests for keyUsage in leaf certificates, part 1: |
| # server-side certificate/suite selection |
| |
| run_test "keyUsage srv #1 (RSA, digitalSignature -> ECDHE-RSA)" \ |
| "$P_SRV key_file=data_files/server2.key \ |
| crt_file=data_files/server2.ku-ds.crt" \ |
| "$P_CLI" \ |
| 0 \ |
| -c "Ciphersuite is TLS-ECDHE-RSA-WITH-" |
| |
| |
| run_test "keyUsage srv #2 (RSA, keyEncipherment -> RSA)" \ |
| "$P_SRV key_file=data_files/server2.key \ |
| crt_file=data_files/server2.ku-ke.crt" \ |
| "$P_CLI" \ |
| 0 \ |
| -c "Ciphersuite is TLS-RSA-WITH-" |
| |
| # add psk to leave an option for client to send SERVERQUIT |
| run_test "keyUsage srv #3 (RSA, keyAgreement -> fail)" \ |
| "$P_SRV psk=abc123 key_file=data_files/server2.key \ |
| crt_file=data_files/server2.ku-ka.crt" \ |
| "$P_CLI psk=badbad" \ |
| 1 \ |
| -C "Ciphersuite is " |
| |
| run_test "keyUsage srv #4 (ECDSA, digitalSignature -> ECDHE-ECDSA)" \ |
| "$P_SRV key_file=data_files/server5.key \ |
| crt_file=data_files/server5.ku-ds.crt" \ |
| "$P_CLI" \ |
| 0 \ |
| -c "Ciphersuite is TLS-ECDHE-ECDSA-WITH-" |
| |
| |
| run_test "keyUsage srv #5 (ECDSA, keyAgreement -> ECDH-)" \ |
| "$P_SRV key_file=data_files/server5.key \ |
| crt_file=data_files/server5.ku-ka.crt" \ |
| "$P_CLI" \ |
| 0 \ |
| -c "Ciphersuite is TLS-ECDH-" |
| |
| # add psk to leave an option for client to send SERVERQUIT |
| run_test "keyUsage srv #6 (ECDSA, keyEncipherment -> fail)" \ |
| "$P_SRV psk=abc123 key_file=data_files/server5.key \ |
| crt_file=data_files/server5.ku-ke.crt" \ |
| "$P_CLI psk=badbad" \ |
| 1 \ |
| -C "Ciphersuite is " |
| |
| # Tests for keyUsage in leaf certificates, part 2: |
| # client-side checking of server cert |
| |
| run_test "keyUsage cli #1 (DigitalSignature+KeyEncipherment, RSA: OK)" \ |
| "$O_SRV -key data_files/server2.key \ |
| -cert data_files/server2.ku-ds_ke.crt" \ |
| "$P_CLI debug_level=2 \ |
| force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \ |
| 0 \ |
| -C "bad certificate (usage extensions)" \ |
| -C "Processing of the Certificate handshake message failed" \ |
| -c "Ciphersuite is TLS-" |
| |
| run_test "keyUsage cli #2 (DigitalSignature+KeyEncipherment, DHE-RSA: OK)" \ |
| "$O_SRV -key data_files/server2.key \ |
| -cert data_files/server2.ku-ds_ke.crt" \ |
| "$P_CLI debug_level=2 \ |
| force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA" \ |
| 0 \ |
| -C "bad certificate (usage extensions)" \ |
| -C "Processing of the Certificate handshake message failed" \ |
| -c "Ciphersuite is TLS-" |
| |
| run_test "keyUsage cli #3 (KeyEncipherment, RSA: OK)" \ |
| "$O_SRV -key data_files/server2.key \ |
| -cert data_files/server2.ku-ke.crt" \ |
| "$P_CLI debug_level=2 \ |
| force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \ |
| 0 \ |
| -C "bad certificate (usage extensions)" \ |
| -C "Processing of the Certificate handshake message failed" \ |
| -c "Ciphersuite is TLS-" |
| |
| run_test "keyUsage cli #4 (KeyEncipherment, DHE-RSA: fail)" \ |
| "$O_SRV -key data_files/server2.key \ |
| -cert data_files/server2.ku-ke.crt" \ |
| "$P_CLI debug_level=2 \ |
| force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA" \ |
| 1 \ |
| -c "bad certificate (usage extensions)" \ |
| -c "Processing of the Certificate handshake message failed" \ |
| -C "Ciphersuite is TLS-" |
| |
| run_test "keyUsage cli #5 (DigitalSignature, DHE-RSA: OK)" \ |
| "$O_SRV -key data_files/server2.key \ |
| -cert data_files/server2.ku-ds.crt" \ |
| "$P_CLI debug_level=2 \ |
| force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA" \ |
| 0 \ |
| -C "bad certificate (usage extensions)" \ |
| -C "Processing of the Certificate handshake message failed" \ |
| -c "Ciphersuite is TLS-" |
| |
| run_test "keyUsage cli #5 (DigitalSignature, RSA: fail)" \ |
| "$O_SRV -key data_files/server2.key \ |
| -cert data_files/server2.ku-ds.crt" \ |
| "$P_CLI debug_level=2 \ |
| force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \ |
| 1 \ |
| -c "bad certificate (usage extensions)" \ |
| -c "Processing of the Certificate handshake message failed" \ |
| -C "Ciphersuite is TLS-" |
| |
| # Tests for keyUsage in leaf certificates, part 3: |
| # server-side checking of client cert |
| |
| run_test "keyUsage cli-auth #1 (RSA, DigitalSignature: OK)" \ |
| "$P_SRV debug_level=2 auth_mode=optional" \ |
| "$O_CLI -key data_files/server2.key \ |
| -cert data_files/server2.ku-ds.crt" \ |
| 0 \ |
| -S "bad certificate (usage extensions)" \ |
| -S "Processing of the Certificate handshake message failed" |
| |
| run_test "keyUsage cli-auth #2 (RSA, KeyEncipherment: fail (soft))" \ |
| "$P_SRV debug_level=2 auth_mode=optional" \ |
| "$O_CLI -key data_files/server2.key \ |
| -cert data_files/server2.ku-ke.crt" \ |
| 0 \ |
| -s "bad certificate (usage extensions)" \ |
| -S "Processing of the Certificate handshake message failed" |
| |
| run_test "keyUsage cli-auth #3 (RSA, KeyEncipherment: fail (hard))" \ |
| "$P_SRV debug_level=2 auth_mode=required" \ |
| "$O_CLI -key data_files/server2.key \ |
| -cert data_files/server2.ku-ke.crt" \ |
| 1 \ |
| -s "bad certificate (usage extensions)" \ |
| -s "Processing of the Certificate handshake message failed" |
| |
| run_test "keyUsage cli-auth #4 (ECDSA, DigitalSignature: OK)" \ |
| "$P_SRV debug_level=2 auth_mode=optional" \ |
| "$O_CLI -key data_files/server5.key \ |
| -cert data_files/server5.ku-ds.crt" \ |
| 0 \ |
| -S "bad certificate (usage extensions)" \ |
| -S "Processing of the Certificate handshake message failed" |
| |
| run_test "keyUsage cli-auth #5 (ECDSA, KeyAgreement: fail (soft))" \ |
| "$P_SRV debug_level=2 auth_mode=optional" \ |
| "$O_CLI -key data_files/server5.key \ |
| -cert data_files/server5.ku-ka.crt" \ |
| 0 \ |
| -s "bad certificate (usage extensions)" \ |
| -S "Processing of the Certificate handshake message failed" |
| |
| # Final report |
| |
| echo "------------------------------------------------------------------------" |
| |
| if [ $FAILS = 0 ]; then |
| echo -n "PASSED" |
| else |
| echo -n "FAILED" |
| fi |
| PASSES=`echo $TESTS - $FAILS | bc` |
| echo " ($PASSES / $TESTS tests)" |
| |
| exit $FAILS |
