| /* |
| * Minimal configuration for TLS NSA Suite B Profile (RFC 6460) |
| * |
| * Distinguishing features: |
| * - no RSA or classic DH, fully based on ECC |
| * - optimized for low RAM usage |
| * |
| * Possible improvements: |
| * - if 128-bit security is enough, disable secp384r1 and SHA-512 |
| * - use embedded certs in DER format and disable PEM_PARSE_C and BASE64_C |
| * |
| * See README.txt for usage instructions. |
| */ |
| |
| #ifndef POLARSSL_CONFIG_H |
| #define POLARSSL_CONFIG_H |
| |
| /* System support */ |
| #define POLARSSL_HAVE_ASM |
| #define POLARSSL_HAVE_TIME |
| #define POLARSSL_HAVE_IPV6 |
| |
| /* PolarSSL feature support */ |
| #define POLARSSL_ECP_DP_SECP256R1_ENABLED |
| #define POLARSSL_ECP_DP_SECP384R1_ENABLED |
| #define POLARSSL_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED |
| #define POLARSSL_SSL_PROTO_TLS1_2 |
| |
| /* PolarSSL modules */ |
| #define POLARSSL_AES_C |
| #define POLARSSL_ASN1_PARSE_C |
| #define POLARSSL_ASN1_WRITE_C |
| #define POLARSSL_BIGNUM_C |
| #define POLARSSL_CIPHER_C |
| #define POLARSSL_CTR_DRBG_C |
| #define POLARSSL_ECDH_C |
| #define POLARSSL_ECDSA_C |
| #define POLARSSL_ECP_C |
| #define POLARSSL_ENTROPY_C |
| #define POLARSSL_GCM_C |
| #define POLARSSL_MD_C |
| #define POLARSSL_NET_C |
| #define POLARSSL_OID_C |
| #define POLARSSL_PK_C |
| #define POLARSSL_PK_PARSE_C |
| #define POLARSSL_SHA256_C |
| #define POLARSSL_SHA512_C |
| #define POLARSSL_SSL_CLI_C |
| #define POLARSSL_SSL_SRV_C |
| #define POLARSSL_SSL_TLS_C |
| #define POLARSSL_X509_CRT_PARSE_C |
| #define POLARSSL_X509_USE_C |
| |
| /* For test certificates */ |
| #define POLARSSL_BASE64_C |
| #define POLARSSL_CERTS_C |
| #define POLARSSL_PEM_PARSE_C |
| |
| /* Save RAM at the expense of ROM */ |
| #define POLARSSL_AES_ROM_TABLES |
| |
| /* Save RAM by adjusting to our exact needs */ |
| #define POLARSSL_ECP_MAX_BITS 384 |
| #define POLARSSL_MPI_MAX_SIZE 48 // 384 bits is 48 bytes |
| |
| /* Save RAM at the expense of speed, see ecp.h */ |
| #define POLARSSL_ECP_WINDOW_SIZE 2 |
| #define POLARSSL_ECP_FIXED_POINT_OPTIM 0 |
| |
| /* Uncomment for a significant speed benefit at the expense of some ROM */ |
| //#define POLARSSL_ECP_NIST_OPTIM |
| |
| /* |
| * You should adjust this to the exact number of sources you're using: default |
| * is the "platform_entropy_poll" source, but you may want to add other ones. |
| * Minimum is 2 for the entropy test suite. |
| */ |
| #define ENTROPY_MAX_SOURCES 2 |
| |
| /* Save ROM and a few bytes of RAM by specifying our own ciphersuite list */ |
| #define SSL_CIPHERSUITES \ |
| TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384, \ |
| TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 |
| |
| /* |
| * Save RAM at the expense of interoperability: do this only if you control |
| * both ends of the connection! (See coments in "polarssl/ssl.h".) |
| * The minimum size here depends on the certificate chain used as well as the |
| * typical size of records. |
| */ |
| #define SSL_MAX_CONTENT_LEN 1024 |
| |
| #include "polarssl/check_config.h" |
| |
| #endif /* POLARSSL_CONFIG_H */ |
