| /* |
| * Multi-precision integer library |
| * |
| * Copyright The Mbed TLS Contributors |
| * SPDX-License-Identifier: Apache-2.0 |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); you may |
| * not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /* |
| * The following sources were referenced in the design of this Multi-precision |
| * Integer library: |
| * |
| * [1] Handbook of Applied Cryptography - 1997 |
| * Menezes, van Oorschot and Vanstone |
| * |
| * [2] Multi-Precision Math |
| * Tom St Denis |
| * https://github.com/libtom/libtommath/blob/develop/tommath.pdf |
| * |
| * [3] GNU Multi-Precision Arithmetic Library |
| * https://gmplib.org/manual/index.html |
| * |
| */ |
| |
| #include "common.h" |
| |
| #if defined(MBEDTLS_BIGNUM_C) |
| |
| #include "mbedtls/bignum.h" |
| #include "bn_mul.h" |
| #include "mbedtls/platform_util.h" |
| #include "mbedtls/error.h" |
| |
| #include <string.h> |
| |
| #if defined(MBEDTLS_PLATFORM_C) |
| #include "mbedtls/platform.h" |
| #else |
| #include <stdio.h> |
| #include <stdlib.h> |
| #define mbedtls_printf printf |
| #define mbedtls_calloc calloc |
| #define mbedtls_free free |
| #endif |
| |
| #define MPI_VALIDATE_RET( cond ) \ |
| MBEDTLS_INTERNAL_VALIDATE_RET( cond, MBEDTLS_ERR_MPI_BAD_INPUT_DATA ) |
| #define MPI_VALIDATE( cond ) \ |
| MBEDTLS_INTERNAL_VALIDATE( cond ) |
| |
| #define ciL (sizeof(mbedtls_mpi_uint)) /* chars in limb */ |
| #define biL (ciL << 3) /* bits in limb */ |
| #define biH (ciL << 2) /* half limb size */ |
| |
| #define MPI_SIZE_T_MAX ( (size_t) -1 ) /* SIZE_T_MAX is not standard */ |
| |
| /* |
| * Convert between bits/chars and number of limbs |
| * Divide first in order to avoid potential overflows |
| */ |
| #define BITS_TO_LIMBS(i) ( (i) / biL + ( (i) % biL != 0 ) ) |
| #define CHARS_TO_LIMBS(i) ( (i) / ciL + ( (i) % ciL != 0 ) ) |
| |
| /* Implementation that should never be optimized out by the compiler */ |
| static void mbedtls_mpi_zeroize( mbedtls_mpi_uint *v, size_t n ) |
| { |
| mbedtls_platform_zeroize( v, ciL * n ); |
| } |
| |
| /* |
| * Initialize one MPI |
| */ |
| void mbedtls_mpi_init( mbedtls_mpi *X ) |
| { |
| MPI_VALIDATE( X != NULL ); |
| |
| X->s = 1; |
| X->n = 0; |
| X->p = NULL; |
| } |
| |
| /* |
| * Unallocate one MPI |
| */ |
| void mbedtls_mpi_free( mbedtls_mpi *X ) |
| { |
| if( X == NULL ) |
| return; |
| |
| if( X->p != NULL ) |
| { |
| mbedtls_mpi_zeroize( X->p, X->n ); |
| mbedtls_free( X->p ); |
| } |
| |
| X->s = 1; |
| X->n = 0; |
| X->p = NULL; |
| } |
| |
| /* |
| * Enlarge to the specified number of limbs |
| */ |
| int mbedtls_mpi_grow( mbedtls_mpi *X, size_t nblimbs ) |
| { |
| mbedtls_mpi_uint *p; |
| MPI_VALIDATE_RET( X != NULL ); |
| |
| if( nblimbs > MBEDTLS_MPI_MAX_LIMBS ) |
| return( MBEDTLS_ERR_MPI_ALLOC_FAILED ); |
| |
| if( X->n < nblimbs ) |
| { |
| if( ( p = (mbedtls_mpi_uint*)mbedtls_calloc( nblimbs, ciL ) ) == NULL ) |
| return( MBEDTLS_ERR_MPI_ALLOC_FAILED ); |
| |
| if( X->p != NULL ) |
| { |
| memcpy( p, X->p, X->n * ciL ); |
| mbedtls_mpi_zeroize( X->p, X->n ); |
| mbedtls_free( X->p ); |
| } |
| |
| X->n = nblimbs; |
| X->p = p; |
| } |
| |
| return( 0 ); |
| } |
| |
| /* |
| * Resize down as much as possible, |
| * while keeping at least the specified number of limbs |
| */ |
| int mbedtls_mpi_shrink( mbedtls_mpi *X, size_t nblimbs ) |
| { |
| mbedtls_mpi_uint *p; |
| size_t i; |
| MPI_VALIDATE_RET( X != NULL ); |
| |
| if( nblimbs > MBEDTLS_MPI_MAX_LIMBS ) |
| return( MBEDTLS_ERR_MPI_ALLOC_FAILED ); |
| |
| /* Actually resize up if there are currently fewer than nblimbs limbs. */ |
| if( X->n <= nblimbs ) |
| return( mbedtls_mpi_grow( X, nblimbs ) ); |
| /* After this point, then X->n > nblimbs and in particular X->n > 0. */ |
| |
| for( i = X->n - 1; i > 0; i-- ) |
| if( X->p[i] != 0 ) |
| break; |
| i++; |
| |
| if( i < nblimbs ) |
| i = nblimbs; |
| |
| if( ( p = (mbedtls_mpi_uint*)mbedtls_calloc( i, ciL ) ) == NULL ) |
| return( MBEDTLS_ERR_MPI_ALLOC_FAILED ); |
| |
| if( X->p != NULL ) |
| { |
| memcpy( p, X->p, i * ciL ); |
| mbedtls_mpi_zeroize( X->p, X->n ); |
| mbedtls_free( X->p ); |
| } |
| |
| X->n = i; |
| X->p = p; |
| |
| return( 0 ); |
| } |
| |
| /* Resize X to have exactly n limbs and set it to 0. */ |
| static int mbedtls_mpi_resize_clear( mbedtls_mpi *X, size_t limbs ) |
| { |
| if( limbs == 0 ) |
| { |
| mbedtls_mpi_free( X ); |
| return( 0 ); |
| } |
| else if( X->n == limbs ) |
| { |
| memset( X->p, 0, limbs * ciL ); |
| X->s = 1; |
| return( 0 ); |
| } |
| else |
| { |
| mbedtls_mpi_free( X ); |
| return( mbedtls_mpi_grow( X, limbs ) ); |
| } |
| } |
| |
| /* |
| * Copy the contents of Y into X. |
| * |
| * This function is not constant-time. Leading zeros in Y may be removed. |
| * |
| * Ensure that X does not shrink. This is not guaranteed by the public API, |
| * but some code in the bignum module relies on this property, for example |
| * in mbedtls_mpi_exp_mod(). |
| */ |
| int mbedtls_mpi_copy( mbedtls_mpi *X, const mbedtls_mpi *Y ) |
| { |
| int ret = 0; |
| size_t i; |
| MPI_VALIDATE_RET( X != NULL ); |
| MPI_VALIDATE_RET( Y != NULL ); |
| |
| if( X == Y ) |
| return( 0 ); |
| |
| if( Y->n == 0 ) |
| { |
| if( X->n != 0 ) |
| { |
| X->s = 1; |
| memset( X->p, 0, X->n * ciL ); |
| } |
| return( 0 ); |
| } |
| |
| for( i = Y->n - 1; i > 0; i-- ) |
| if( Y->p[i] != 0 ) |
| break; |
| i++; |
| |
| X->s = Y->s; |
| |
| if( X->n < i ) |
| { |
| MBEDTLS_MPI_CHK( mbedtls_mpi_grow( X, i ) ); |
| } |
| else |
| { |
| memset( X->p + i, 0, ( X->n - i ) * ciL ); |
| } |
| |
| memcpy( X->p, Y->p, i * ciL ); |
| |
| cleanup: |
| |
| return( ret ); |
| } |
| |
| /* |
| * Swap the contents of X and Y |
| */ |
| void mbedtls_mpi_swap( mbedtls_mpi *X, mbedtls_mpi *Y ) |
| { |
| mbedtls_mpi T; |
| MPI_VALIDATE( X != NULL ); |
| MPI_VALIDATE( Y != NULL ); |
| |
| memcpy( &T, X, sizeof( mbedtls_mpi ) ); |
| memcpy( X, Y, sizeof( mbedtls_mpi ) ); |
| memcpy( Y, &T, sizeof( mbedtls_mpi ) ); |
| } |
| |
| /* |
| * Conditionally assign dest = src, without leaking information |
| * about whether the assignment was made or not. |
| * dest and src must be arrays of limbs of size n. |
| * assign must be 0 or 1. |
| */ |
| static void mpi_safe_cond_assign( size_t n, |
| mbedtls_mpi_uint *dest, |
| const mbedtls_mpi_uint *src, |
| unsigned char assign ) |
| { |
| size_t i; |
| for( i = 0; i < n; i++ ) |
| dest[i] = dest[i] * ( 1 - assign ) + src[i] * assign; |
| } |
| |
| /* |
| * Conditionally assign X = Y, without leaking information |
| * about whether the assignment was made or not. |
| * (Leaking information about the respective sizes of X and Y is ok however.) |
| */ |
| int mbedtls_mpi_safe_cond_assign( mbedtls_mpi *X, const mbedtls_mpi *Y, unsigned char assign ) |
| { |
| int ret = 0; |
| size_t i; |
| MPI_VALIDATE_RET( X != NULL ); |
| MPI_VALIDATE_RET( Y != NULL ); |
| |
| /* make sure assign is 0 or 1 in a time-constant manner */ |
| assign = (assign | (unsigned char)-assign) >> 7; |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_grow( X, Y->n ) ); |
| |
| X->s = X->s * ( 1 - assign ) + Y->s * assign; |
| |
| mpi_safe_cond_assign( Y->n, X->p, Y->p, assign ); |
| |
| for( i = Y->n; i < X->n; i++ ) |
| X->p[i] *= ( 1 - assign ); |
| |
| cleanup: |
| return( ret ); |
| } |
| |
| /* |
| * Conditionally swap X and Y, without leaking information |
| * about whether the swap was made or not. |
| * Here it is not ok to simply swap the pointers, which whould lead to |
| * different memory access patterns when X and Y are used afterwards. |
| */ |
| int mbedtls_mpi_safe_cond_swap( mbedtls_mpi *X, mbedtls_mpi *Y, unsigned char swap ) |
| { |
| int ret, s; |
| size_t i; |
| mbedtls_mpi_uint tmp; |
| MPI_VALIDATE_RET( X != NULL ); |
| MPI_VALIDATE_RET( Y != NULL ); |
| |
| if( X == Y ) |
| return( 0 ); |
| |
| /* make sure swap is 0 or 1 in a time-constant manner */ |
| swap = (swap | (unsigned char)-swap) >> 7; |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_grow( X, Y->n ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_grow( Y, X->n ) ); |
| |
| s = X->s; |
| X->s = X->s * ( 1 - swap ) + Y->s * swap; |
| Y->s = Y->s * ( 1 - swap ) + s * swap; |
| |
| |
| for( i = 0; i < X->n; i++ ) |
| { |
| tmp = X->p[i]; |
| X->p[i] = X->p[i] * ( 1 - swap ) + Y->p[i] * swap; |
| Y->p[i] = Y->p[i] * ( 1 - swap ) + tmp * swap; |
| } |
| |
| cleanup: |
| return( ret ); |
| } |
| |
| /* |
| * Set value from integer |
| */ |
| int mbedtls_mpi_lset( mbedtls_mpi *X, mbedtls_mpi_sint z ) |
| { |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; |
| MPI_VALIDATE_RET( X != NULL ); |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_grow( X, 1 ) ); |
| memset( X->p, 0, X->n * ciL ); |
| |
| X->p[0] = ( z < 0 ) ? -z : z; |
| X->s = ( z < 0 ) ? -1 : 1; |
| |
| cleanup: |
| |
| return( ret ); |
| } |
| |
| /* |
| * Get a specific bit |
| */ |
| int mbedtls_mpi_get_bit( const mbedtls_mpi *X, size_t pos ) |
| { |
| MPI_VALIDATE_RET( X != NULL ); |
| |
| if( X->n * biL <= pos ) |
| return( 0 ); |
| |
| return( ( X->p[pos / biL] >> ( pos % biL ) ) & 0x01 ); |
| } |
| |
| /* Get a specific byte, without range checks. */ |
| #define GET_BYTE( X, i ) \ |
| ( ( ( X )->p[( i ) / ciL] >> ( ( ( i ) % ciL ) * 8 ) ) & 0xff ) |
| |
| /* |
| * Set a bit to a specific value of 0 or 1 |
| */ |
| int mbedtls_mpi_set_bit( mbedtls_mpi *X, size_t pos, unsigned char val ) |
| { |
| int ret = 0; |
| size_t off = pos / biL; |
| size_t idx = pos % biL; |
| MPI_VALIDATE_RET( X != NULL ); |
| |
| if( val != 0 && val != 1 ) |
| return( MBEDTLS_ERR_MPI_BAD_INPUT_DATA ); |
| |
| if( X->n * biL <= pos ) |
| { |
| if( val == 0 ) |
| return( 0 ); |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_grow( X, off + 1 ) ); |
| } |
| |
| X->p[off] &= ~( (mbedtls_mpi_uint) 0x01 << idx ); |
| X->p[off] |= (mbedtls_mpi_uint) val << idx; |
| |
| cleanup: |
| |
| return( ret ); |
| } |
| |
| /* |
| * Return the number of less significant zero-bits |
| */ |
| size_t mbedtls_mpi_lsb( const mbedtls_mpi *X ) |
| { |
| size_t i, j, count = 0; |
| MBEDTLS_INTERNAL_VALIDATE_RET( X != NULL, 0 ); |
| |
| for( i = 0; i < X->n; i++ ) |
| for( j = 0; j < biL; j++, count++ ) |
| if( ( ( X->p[i] >> j ) & 1 ) != 0 ) |
| return( count ); |
| |
| return( 0 ); |
| } |
| |
| /* |
| * Count leading zero bits in a given integer |
| */ |
| static size_t mbedtls_clz( const mbedtls_mpi_uint x ) |
| { |
| size_t j; |
| mbedtls_mpi_uint mask = (mbedtls_mpi_uint) 1 << (biL - 1); |
| |
| for( j = 0; j < biL; j++ ) |
| { |
| if( x & mask ) break; |
| |
| mask >>= 1; |
| } |
| |
| return j; |
| } |
| |
| /* |
| * Return the number of bits |
| */ |
| size_t mbedtls_mpi_bitlen( const mbedtls_mpi *X ) |
| { |
| size_t i, j; |
| |
| if( X->n == 0 ) |
| return( 0 ); |
| |
| for( i = X->n - 1; i > 0; i-- ) |
| if( X->p[i] != 0 ) |
| break; |
| |
| j = biL - mbedtls_clz( X->p[i] ); |
| |
| return( ( i * biL ) + j ); |
| } |
| |
| /* |
| * Return the total size in bytes |
| */ |
| size_t mbedtls_mpi_size( const mbedtls_mpi *X ) |
| { |
| return( ( mbedtls_mpi_bitlen( X ) + 7 ) >> 3 ); |
| } |
| |
| /* |
| * Convert an ASCII character to digit value |
| */ |
| static int mpi_get_digit( mbedtls_mpi_uint *d, int radix, char c ) |
| { |
| *d = 255; |
| |
| if( c >= 0x30 && c <= 0x39 ) *d = c - 0x30; |
| if( c >= 0x41 && c <= 0x46 ) *d = c - 0x37; |
| if( c >= 0x61 && c <= 0x66 ) *d = c - 0x57; |
| |
| if( *d >= (mbedtls_mpi_uint) radix ) |
| return( MBEDTLS_ERR_MPI_INVALID_CHARACTER ); |
| |
| return( 0 ); |
| } |
| |
| /* |
| * Import from an ASCII string |
| */ |
| int mbedtls_mpi_read_string( mbedtls_mpi *X, int radix, const char *s ) |
| { |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; |
| size_t i, j, slen, n; |
| int sign = 1; |
| mbedtls_mpi_uint d; |
| mbedtls_mpi T; |
| MPI_VALIDATE_RET( X != NULL ); |
| MPI_VALIDATE_RET( s != NULL ); |
| |
| if( radix < 2 || radix > 16 ) |
| return( MBEDTLS_ERR_MPI_BAD_INPUT_DATA ); |
| |
| mbedtls_mpi_init( &T ); |
| |
| if( s[0] == 0 ) |
| { |
| mbedtls_mpi_free( X ); |
| return( 0 ); |
| } |
| |
| if( s[0] == '-' ) |
| { |
| ++s; |
| sign = -1; |
| } |
| |
| slen = strlen( s ); |
| |
| if( radix == 16 ) |
| { |
| if( slen > MPI_SIZE_T_MAX >> 2 ) |
| return( MBEDTLS_ERR_MPI_BAD_INPUT_DATA ); |
| |
| n = BITS_TO_LIMBS( slen << 2 ); |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_grow( X, n ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_lset( X, 0 ) ); |
| |
| for( i = slen, j = 0; i > 0; i--, j++ ) |
| { |
| MBEDTLS_MPI_CHK( mpi_get_digit( &d, radix, s[i - 1] ) ); |
| X->p[j / ( 2 * ciL )] |= d << ( ( j % ( 2 * ciL ) ) << 2 ); |
| } |
| } |
| else |
| { |
| MBEDTLS_MPI_CHK( mbedtls_mpi_lset( X, 0 ) ); |
| |
| for( i = 0; i < slen; i++ ) |
| { |
| MBEDTLS_MPI_CHK( mpi_get_digit( &d, radix, s[i] ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_mul_int( &T, X, radix ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_add_int( X, &T, d ) ); |
| } |
| } |
| |
| if( sign < 0 && mbedtls_mpi_bitlen( X ) != 0 ) |
| X->s = -1; |
| |
| cleanup: |
| |
| mbedtls_mpi_free( &T ); |
| |
| return( ret ); |
| } |
| |
| /* |
| * Helper to write the digits high-order first. |
| */ |
| static int mpi_write_hlp( mbedtls_mpi *X, int radix, |
| char **p, const size_t buflen ) |
| { |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; |
| mbedtls_mpi_uint r; |
| size_t length = 0; |
| char *p_end = *p + buflen; |
| |
| do |
| { |
| if( length >= buflen ) |
| { |
| return( MBEDTLS_ERR_MPI_BUFFER_TOO_SMALL ); |
| } |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_mod_int( &r, X, radix ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_div_int( X, NULL, X, radix ) ); |
| /* |
| * Write the residue in the current position, as an ASCII character. |
| */ |
| if( r < 0xA ) |
| *(--p_end) = (char)( '0' + r ); |
| else |
| *(--p_end) = (char)( 'A' + ( r - 0xA ) ); |
| |
| length++; |
| } while( mbedtls_mpi_cmp_int( X, 0 ) != 0 ); |
| |
| memmove( *p, p_end, length ); |
| *p += length; |
| |
| cleanup: |
| |
| return( ret ); |
| } |
| |
| /* |
| * Export into an ASCII string |
| */ |
| int mbedtls_mpi_write_string( const mbedtls_mpi *X, int radix, |
| char *buf, size_t buflen, size_t *olen ) |
| { |
| int ret = 0; |
| size_t n; |
| char *p; |
| mbedtls_mpi T; |
| MPI_VALIDATE_RET( X != NULL ); |
| MPI_VALIDATE_RET( olen != NULL ); |
| MPI_VALIDATE_RET( buflen == 0 || buf != NULL ); |
| |
| if( radix < 2 || radix > 16 ) |
| return( MBEDTLS_ERR_MPI_BAD_INPUT_DATA ); |
| |
| n = mbedtls_mpi_bitlen( X ); /* Number of bits necessary to present `n`. */ |
| if( radix >= 4 ) n >>= 1; /* Number of 4-adic digits necessary to present |
| * `n`. If radix > 4, this might be a strict |
| * overapproximation of the number of |
| * radix-adic digits needed to present `n`. */ |
| if( radix >= 16 ) n >>= 1; /* Number of hexadecimal digits necessary to |
| * present `n`. */ |
| |
| n += 1; /* Terminating null byte */ |
| n += 1; /* Compensate for the divisions above, which round down `n` |
| * in case it's not even. */ |
| n += 1; /* Potential '-'-sign. */ |
| n += ( n & 1 ); /* Make n even to have enough space for hexadecimal writing, |
| * which always uses an even number of hex-digits. */ |
| |
| if( buflen < n ) |
| { |
| *olen = n; |
| return( MBEDTLS_ERR_MPI_BUFFER_TOO_SMALL ); |
| } |
| |
| p = buf; |
| mbedtls_mpi_init( &T ); |
| |
| if( X->s == -1 ) |
| { |
| *p++ = '-'; |
| buflen--; |
| } |
| |
| if( radix == 16 ) |
| { |
| int c; |
| size_t i, j, k; |
| |
| for( i = X->n, k = 0; i > 0; i-- ) |
| { |
| for( j = ciL; j > 0; j-- ) |
| { |
| c = ( X->p[i - 1] >> ( ( j - 1 ) << 3) ) & 0xFF; |
| |
| if( c == 0 && k == 0 && ( i + j ) != 2 ) |
| continue; |
| |
| *(p++) = "0123456789ABCDEF" [c / 16]; |
| *(p++) = "0123456789ABCDEF" [c % 16]; |
| k = 1; |
| } |
| } |
| } |
| else |
| { |
| MBEDTLS_MPI_CHK( mbedtls_mpi_copy( &T, X ) ); |
| |
| if( T.s == -1 ) |
| T.s = 1; |
| |
| MBEDTLS_MPI_CHK( mpi_write_hlp( &T, radix, &p, buflen ) ); |
| } |
| |
| *p++ = '\0'; |
| *olen = p - buf; |
| |
| cleanup: |
| |
| mbedtls_mpi_free( &T ); |
| |
| return( ret ); |
| } |
| |
| #if defined(MBEDTLS_FS_IO) |
| /* |
| * Read X from an opened file |
| */ |
| int mbedtls_mpi_read_file( mbedtls_mpi *X, int radix, FILE *fin ) |
| { |
| mbedtls_mpi_uint d; |
| size_t slen; |
| char *p; |
| /* |
| * Buffer should have space for (short) label and decimal formatted MPI, |
| * newline characters and '\0' |
| */ |
| char s[ MBEDTLS_MPI_RW_BUFFER_SIZE ]; |
| |
| MPI_VALIDATE_RET( X != NULL ); |
| MPI_VALIDATE_RET( fin != NULL ); |
| |
| if( radix < 2 || radix > 16 ) |
| return( MBEDTLS_ERR_MPI_BAD_INPUT_DATA ); |
| |
| memset( s, 0, sizeof( s ) ); |
| if( fgets( s, sizeof( s ) - 1, fin ) == NULL ) |
| return( MBEDTLS_ERR_MPI_FILE_IO_ERROR ); |
| |
| slen = strlen( s ); |
| if( slen == sizeof( s ) - 2 ) |
| return( MBEDTLS_ERR_MPI_BUFFER_TOO_SMALL ); |
| |
| if( slen > 0 && s[slen - 1] == '\n' ) { slen--; s[slen] = '\0'; } |
| if( slen > 0 && s[slen - 1] == '\r' ) { slen--; s[slen] = '\0'; } |
| |
| p = s + slen; |
| while( p-- > s ) |
| if( mpi_get_digit( &d, radix, *p ) != 0 ) |
| break; |
| |
| return( mbedtls_mpi_read_string( X, radix, p + 1 ) ); |
| } |
| |
| /* |
| * Write X into an opened file (or stdout if fout == NULL) |
| */ |
| int mbedtls_mpi_write_file( const char *p, const mbedtls_mpi *X, int radix, FILE *fout ) |
| { |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; |
| size_t n, slen, plen; |
| /* |
| * Buffer should have space for (short) label and decimal formatted MPI, |
| * newline characters and '\0' |
| */ |
| char s[ MBEDTLS_MPI_RW_BUFFER_SIZE ]; |
| MPI_VALIDATE_RET( X != NULL ); |
| |
| if( radix < 2 || radix > 16 ) |
| return( MBEDTLS_ERR_MPI_BAD_INPUT_DATA ); |
| |
| memset( s, 0, sizeof( s ) ); |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_write_string( X, radix, s, sizeof( s ) - 2, &n ) ); |
| |
| if( p == NULL ) p = ""; |
| |
| plen = strlen( p ); |
| slen = strlen( s ); |
| s[slen++] = '\r'; |
| s[slen++] = '\n'; |
| |
| if( fout != NULL ) |
| { |
| if( fwrite( p, 1, plen, fout ) != plen || |
| fwrite( s, 1, slen, fout ) != slen ) |
| return( MBEDTLS_ERR_MPI_FILE_IO_ERROR ); |
| } |
| else |
| mbedtls_printf( "%s%s", p, s ); |
| |
| cleanup: |
| |
| return( ret ); |
| } |
| #endif /* MBEDTLS_FS_IO */ |
| |
| |
| /* Convert a big-endian byte array aligned to the size of mbedtls_mpi_uint |
| * into the storage form used by mbedtls_mpi. */ |
| |
| static mbedtls_mpi_uint mpi_uint_bigendian_to_host_c( mbedtls_mpi_uint x ) |
| { |
| uint8_t i; |
| unsigned char *x_ptr; |
| mbedtls_mpi_uint tmp = 0; |
| |
| for( i = 0, x_ptr = (unsigned char*) &x; i < ciL; i++, x_ptr++ ) |
| { |
| tmp <<= CHAR_BIT; |
| tmp |= (mbedtls_mpi_uint) *x_ptr; |
| } |
| |
| return( tmp ); |
| } |
| |
| static mbedtls_mpi_uint mpi_uint_bigendian_to_host( mbedtls_mpi_uint x ) |
| { |
| #if defined(__BYTE_ORDER__) |
| |
| /* Nothing to do on bigendian systems. */ |
| #if ( __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__ ) |
| return( x ); |
| #endif /* __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__ */ |
| |
| #if ( __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__ ) |
| |
| /* For GCC and Clang, have builtins for byte swapping. */ |
| #if defined(__GNUC__) && defined(__GNUC_PREREQ) |
| #if __GNUC_PREREQ(4,3) |
| #define have_bswap |
| #endif |
| #endif |
| |
| #if defined(__clang__) && defined(__has_builtin) |
| #if __has_builtin(__builtin_bswap32) && \ |
| __has_builtin(__builtin_bswap64) |
| #define have_bswap |
| #endif |
| #endif |
| |
| #if defined(have_bswap) |
| /* The compiler is hopefully able to statically evaluate this! */ |
| switch( sizeof(mbedtls_mpi_uint) ) |
| { |
| case 4: |
| return( __builtin_bswap32(x) ); |
| case 8: |
| return( __builtin_bswap64(x) ); |
| } |
| #endif |
| #endif /* __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__ */ |
| #endif /* __BYTE_ORDER__ */ |
| |
| /* Fall back to C-based reordering if we don't know the byte order |
| * or we couldn't use a compiler-specific builtin. */ |
| return( mpi_uint_bigendian_to_host_c( x ) ); |
| } |
| |
| static void mpi_bigendian_to_host( mbedtls_mpi_uint * const p, size_t limbs ) |
| { |
| mbedtls_mpi_uint *cur_limb_left; |
| mbedtls_mpi_uint *cur_limb_right; |
| if( limbs == 0 ) |
| return; |
| |
| /* |
| * Traverse limbs and |
| * - adapt byte-order in each limb |
| * - swap the limbs themselves. |
| * For that, simultaneously traverse the limbs from left to right |
| * and from right to left, as long as the left index is not bigger |
| * than the right index (it's not a problem if limbs is odd and the |
| * indices coincide in the last iteration). |
| */ |
| for( cur_limb_left = p, cur_limb_right = p + ( limbs - 1 ); |
| cur_limb_left <= cur_limb_right; |
| cur_limb_left++, cur_limb_right-- ) |
| { |
| mbedtls_mpi_uint tmp; |
| /* Note that if cur_limb_left == cur_limb_right, |
| * this code effectively swaps the bytes only once. */ |
| tmp = mpi_uint_bigendian_to_host( *cur_limb_left ); |
| *cur_limb_left = mpi_uint_bigendian_to_host( *cur_limb_right ); |
| *cur_limb_right = tmp; |
| } |
| } |
| |
| /* |
| * Import X from unsigned binary data, little endian |
| */ |
| int mbedtls_mpi_read_binary_le( mbedtls_mpi *X, |
| const unsigned char *buf, size_t buflen ) |
| { |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; |
| size_t i; |
| size_t const limbs = CHARS_TO_LIMBS( buflen ); |
| |
| /* Ensure that target MPI has exactly the necessary number of limbs */ |
| MBEDTLS_MPI_CHK( mbedtls_mpi_resize_clear( X, limbs ) ); |
| |
| for( i = 0; i < buflen; i++ ) |
| X->p[i / ciL] |= ((mbedtls_mpi_uint) buf[i]) << ((i % ciL) << 3); |
| |
| cleanup: |
| |
| /* |
| * This function is also used to import keys. However, wiping the buffers |
| * upon failure is not necessary because failure only can happen before any |
| * input is copied. |
| */ |
| return( ret ); |
| } |
| |
| /* |
| * Import X from unsigned binary data, big endian |
| */ |
| int mbedtls_mpi_read_binary( mbedtls_mpi *X, const unsigned char *buf, size_t buflen ) |
| { |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; |
| size_t const limbs = CHARS_TO_LIMBS( buflen ); |
| size_t const overhead = ( limbs * ciL ) - buflen; |
| unsigned char *Xp; |
| |
| MPI_VALIDATE_RET( X != NULL ); |
| MPI_VALIDATE_RET( buflen == 0 || buf != NULL ); |
| |
| /* Ensure that target MPI has exactly the necessary number of limbs */ |
| MBEDTLS_MPI_CHK( mbedtls_mpi_resize_clear( X, limbs ) ); |
| |
| /* Avoid calling `memcpy` with NULL source or destination argument, |
| * even if buflen is 0. */ |
| if( buflen != 0 ) |
| { |
| Xp = (unsigned char*) X->p; |
| memcpy( Xp + overhead, buf, buflen ); |
| |
| mpi_bigendian_to_host( X->p, limbs ); |
| } |
| |
| cleanup: |
| |
| /* |
| * This function is also used to import keys. However, wiping the buffers |
| * upon failure is not necessary because failure only can happen before any |
| * input is copied. |
| */ |
| return( ret ); |
| } |
| |
| /* |
| * Export X into unsigned binary data, little endian |
| */ |
| int mbedtls_mpi_write_binary_le( const mbedtls_mpi *X, |
| unsigned char *buf, size_t buflen ) |
| { |
| size_t stored_bytes = X->n * ciL; |
| size_t bytes_to_copy; |
| size_t i; |
| |
| if( stored_bytes < buflen ) |
| { |
| bytes_to_copy = stored_bytes; |
| } |
| else |
| { |
| bytes_to_copy = buflen; |
| |
| /* The output buffer is smaller than the allocated size of X. |
| * However X may fit if its leading bytes are zero. */ |
| for( i = bytes_to_copy; i < stored_bytes; i++ ) |
| { |
| if( GET_BYTE( X, i ) != 0 ) |
| return( MBEDTLS_ERR_MPI_BUFFER_TOO_SMALL ); |
| } |
| } |
| |
| for( i = 0; i < bytes_to_copy; i++ ) |
| buf[i] = GET_BYTE( X, i ); |
| |
| if( stored_bytes < buflen ) |
| { |
| /* Write trailing 0 bytes */ |
| memset( buf + stored_bytes, 0, buflen - stored_bytes ); |
| } |
| |
| return( 0 ); |
| } |
| |
| /* |
| * Export X into unsigned binary data, big endian |
| */ |
| int mbedtls_mpi_write_binary( const mbedtls_mpi *X, |
| unsigned char *buf, size_t buflen ) |
| { |
| size_t stored_bytes; |
| size_t bytes_to_copy; |
| unsigned char *p; |
| size_t i; |
| |
| MPI_VALIDATE_RET( X != NULL ); |
| MPI_VALIDATE_RET( buflen == 0 || buf != NULL ); |
| |
| stored_bytes = X->n * ciL; |
| |
| if( stored_bytes < buflen ) |
| { |
| /* There is enough space in the output buffer. Write initial |
| * null bytes and record the position at which to start |
| * writing the significant bytes. In this case, the execution |
| * trace of this function does not depend on the value of the |
| * number. */ |
| bytes_to_copy = stored_bytes; |
| p = buf + buflen - stored_bytes; |
| memset( buf, 0, buflen - stored_bytes ); |
| } |
| else |
| { |
| /* The output buffer is smaller than the allocated size of X. |
| * However X may fit if its leading bytes are zero. */ |
| bytes_to_copy = buflen; |
| p = buf; |
| for( i = bytes_to_copy; i < stored_bytes; i++ ) |
| { |
| if( GET_BYTE( X, i ) != 0 ) |
| return( MBEDTLS_ERR_MPI_BUFFER_TOO_SMALL ); |
| } |
| } |
| |
| for( i = 0; i < bytes_to_copy; i++ ) |
| p[bytes_to_copy - i - 1] = GET_BYTE( X, i ); |
| |
| return( 0 ); |
| } |
| |
| /* |
| * Left-shift: X <<= count |
| */ |
| int mbedtls_mpi_shift_l( mbedtls_mpi *X, size_t count ) |
| { |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; |
| size_t i, v0, t1; |
| mbedtls_mpi_uint r0 = 0, r1; |
| MPI_VALIDATE_RET( X != NULL ); |
| |
| v0 = count / (biL ); |
| t1 = count & (biL - 1); |
| |
| i = mbedtls_mpi_bitlen( X ) + count; |
| |
| if( X->n * biL < i ) |
| MBEDTLS_MPI_CHK( mbedtls_mpi_grow( X, BITS_TO_LIMBS( i ) ) ); |
| |
| ret = 0; |
| |
| /* |
| * shift by count / limb_size |
| */ |
| if( v0 > 0 ) |
| { |
| for( i = X->n; i > v0; i-- ) |
| X->p[i - 1] = X->p[i - v0 - 1]; |
| |
| for( ; i > 0; i-- ) |
| X->p[i - 1] = 0; |
| } |
| |
| /* |
| * shift by count % limb_size |
| */ |
| if( t1 > 0 ) |
| { |
| for( i = v0; i < X->n; i++ ) |
| { |
| r1 = X->p[i] >> (biL - t1); |
| X->p[i] <<= t1; |
| X->p[i] |= r0; |
| r0 = r1; |
| } |
| } |
| |
| cleanup: |
| |
| return( ret ); |
| } |
| |
| /* |
| * Right-shift: X >>= count |
| */ |
| int mbedtls_mpi_shift_r( mbedtls_mpi *X, size_t count ) |
| { |
| size_t i, v0, v1; |
| mbedtls_mpi_uint r0 = 0, r1; |
| MPI_VALIDATE_RET( X != NULL ); |
| |
| v0 = count / biL; |
| v1 = count & (biL - 1); |
| |
| if( v0 > X->n || ( v0 == X->n && v1 > 0 ) ) |
| return mbedtls_mpi_lset( X, 0 ); |
| |
| /* |
| * shift by count / limb_size |
| */ |
| if( v0 > 0 ) |
| { |
| for( i = 0; i < X->n - v0; i++ ) |
| X->p[i] = X->p[i + v0]; |
| |
| for( ; i < X->n; i++ ) |
| X->p[i] = 0; |
| } |
| |
| /* |
| * shift by count % limb_size |
| */ |
| if( v1 > 0 ) |
| { |
| for( i = X->n; i > 0; i-- ) |
| { |
| r1 = X->p[i - 1] << (biL - v1); |
| X->p[i - 1] >>= v1; |
| X->p[i - 1] |= r0; |
| r0 = r1; |
| } |
| } |
| |
| return( 0 ); |
| } |
| |
| /* |
| * Compare unsigned values |
| */ |
| int mbedtls_mpi_cmp_abs( const mbedtls_mpi *X, const mbedtls_mpi *Y ) |
| { |
| size_t i, j; |
| MPI_VALIDATE_RET( X != NULL ); |
| MPI_VALIDATE_RET( Y != NULL ); |
| |
| for( i = X->n; i > 0; i-- ) |
| if( X->p[i - 1] != 0 ) |
| break; |
| |
| for( j = Y->n; j > 0; j-- ) |
| if( Y->p[j - 1] != 0 ) |
| break; |
| |
| if( i == 0 && j == 0 ) |
| return( 0 ); |
| |
| if( i > j ) return( 1 ); |
| if( j > i ) return( -1 ); |
| |
| for( ; i > 0; i-- ) |
| { |
| if( X->p[i - 1] > Y->p[i - 1] ) return( 1 ); |
| if( X->p[i - 1] < Y->p[i - 1] ) return( -1 ); |
| } |
| |
| return( 0 ); |
| } |
| |
| /* |
| * Compare signed values |
| */ |
| int mbedtls_mpi_cmp_mpi( const mbedtls_mpi *X, const mbedtls_mpi *Y ) |
| { |
| size_t i, j; |
| MPI_VALIDATE_RET( X != NULL ); |
| MPI_VALIDATE_RET( Y != NULL ); |
| |
| for( i = X->n; i > 0; i-- ) |
| if( X->p[i - 1] != 0 ) |
| break; |
| |
| for( j = Y->n; j > 0; j-- ) |
| if( Y->p[j - 1] != 0 ) |
| break; |
| |
| if( i == 0 && j == 0 ) |
| return( 0 ); |
| |
| if( i > j ) return( X->s ); |
| if( j > i ) return( -Y->s ); |
| |
| if( X->s > 0 && Y->s < 0 ) return( 1 ); |
| if( Y->s > 0 && X->s < 0 ) return( -1 ); |
| |
| for( ; i > 0; i-- ) |
| { |
| if( X->p[i - 1] > Y->p[i - 1] ) return( X->s ); |
| if( X->p[i - 1] < Y->p[i - 1] ) return( -X->s ); |
| } |
| |
| return( 0 ); |
| } |
| |
| /** Decide if an integer is less than the other, without branches. |
| * |
| * \param x First integer. |
| * \param y Second integer. |
| * |
| * \return 1 if \p x is less than \p y, 0 otherwise |
| */ |
| static unsigned ct_lt_mpi_uint( const mbedtls_mpi_uint x, |
| const mbedtls_mpi_uint y ) |
| { |
| mbedtls_mpi_uint ret; |
| mbedtls_mpi_uint cond; |
| |
| /* |
| * Check if the most significant bits (MSB) of the operands are different. |
| */ |
| cond = ( x ^ y ); |
| /* |
| * If the MSB are the same then the difference x-y will be negative (and |
| * have its MSB set to 1 during conversion to unsigned) if and only if x<y. |
| */ |
| ret = ( x - y ) & ~cond; |
| /* |
| * If the MSB are different, then the operand with the MSB of 1 is the |
| * bigger. (That is if y has MSB of 1, then x<y is true and it is false if |
| * the MSB of y is 0.) |
| */ |
| ret |= y & cond; |
| |
| |
| ret = ret >> ( biL - 1 ); |
| |
| return (unsigned) ret; |
| } |
| |
| /* |
| * Compare signed values in constant time |
| */ |
| int mbedtls_mpi_lt_mpi_ct( const mbedtls_mpi *X, const mbedtls_mpi *Y, |
| unsigned *ret ) |
| { |
| size_t i; |
| /* The value of any of these variables is either 0 or 1 at all times. */ |
| unsigned cond, done, X_is_negative, Y_is_negative; |
| |
| MPI_VALIDATE_RET( X != NULL ); |
| MPI_VALIDATE_RET( Y != NULL ); |
| MPI_VALIDATE_RET( ret != NULL ); |
| |
| if( X->n != Y->n ) |
| return MBEDTLS_ERR_MPI_BAD_INPUT_DATA; |
| |
| /* |
| * Set sign_N to 1 if N >= 0, 0 if N < 0. |
| * We know that N->s == 1 if N >= 0 and N->s == -1 if N < 0. |
| */ |
| X_is_negative = ( X->s & 2 ) >> 1; |
| Y_is_negative = ( Y->s & 2 ) >> 1; |
| |
| /* |
| * If the signs are different, then the positive operand is the bigger. |
| * That is if X is negative (X_is_negative == 1), then X < Y is true and it |
| * is false if X is positive (X_is_negative == 0). |
| */ |
| cond = ( X_is_negative ^ Y_is_negative ); |
| *ret = cond & X_is_negative; |
| |
| /* |
| * This is a constant-time function. We might have the result, but we still |
| * need to go through the loop. Record if we have the result already. |
| */ |
| done = cond; |
| |
| for( i = X->n; i > 0; i-- ) |
| { |
| /* |
| * If Y->p[i - 1] < X->p[i - 1] then X < Y is true if and only if both |
| * X and Y are negative. |
| * |
| * Again even if we can make a decision, we just mark the result and |
| * the fact that we are done and continue looping. |
| */ |
| cond = ct_lt_mpi_uint( Y->p[i - 1], X->p[i - 1] ); |
| *ret |= cond & ( 1 - done ) & X_is_negative; |
| done |= cond; |
| |
| /* |
| * If X->p[i - 1] < Y->p[i - 1] then X < Y is true if and only if both |
| * X and Y are positive. |
| * |
| * Again even if we can make a decision, we just mark the result and |
| * the fact that we are done and continue looping. |
| */ |
| cond = ct_lt_mpi_uint( X->p[i - 1], Y->p[i - 1] ); |
| *ret |= cond & ( 1 - done ) & ( 1 - X_is_negative ); |
| done |= cond; |
| } |
| |
| return( 0 ); |
| } |
| |
| /* |
| * Compare signed values |
| */ |
| int mbedtls_mpi_cmp_int( const mbedtls_mpi *X, mbedtls_mpi_sint z ) |
| { |
| mbedtls_mpi Y; |
| mbedtls_mpi_uint p[1]; |
| MPI_VALIDATE_RET( X != NULL ); |
| |
| *p = ( z < 0 ) ? -z : z; |
| Y.s = ( z < 0 ) ? -1 : 1; |
| Y.n = 1; |
| Y.p = p; |
| |
| return( mbedtls_mpi_cmp_mpi( X, &Y ) ); |
| } |
| |
| /* |
| * Unsigned addition: X = |A| + |B| (HAC 14.7) |
| */ |
| int mbedtls_mpi_add_abs( mbedtls_mpi *X, const mbedtls_mpi *A, const mbedtls_mpi *B ) |
| { |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; |
| size_t i, j; |
| mbedtls_mpi_uint *o, *p, c, tmp; |
| MPI_VALIDATE_RET( X != NULL ); |
| MPI_VALIDATE_RET( A != NULL ); |
| MPI_VALIDATE_RET( B != NULL ); |
| |
| if( X == B ) |
| { |
| const mbedtls_mpi *T = A; A = X; B = T; |
| } |
| |
| if( X != A ) |
| MBEDTLS_MPI_CHK( mbedtls_mpi_copy( X, A ) ); |
| |
| /* |
| * X should always be positive as a result of unsigned additions. |
| */ |
| X->s = 1; |
| |
| for( j = B->n; j > 0; j-- ) |
| if( B->p[j - 1] != 0 ) |
| break; |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_grow( X, j ) ); |
| |
| o = B->p; p = X->p; c = 0; |
| |
| /* |
| * tmp is used because it might happen that p == o |
| */ |
| for( i = 0; i < j; i++, o++, p++ ) |
| { |
| tmp= *o; |
| *p += c; c = ( *p < c ); |
| *p += tmp; c += ( *p < tmp ); |
| } |
| |
| while( c != 0 ) |
| { |
| if( i >= X->n ) |
| { |
| MBEDTLS_MPI_CHK( mbedtls_mpi_grow( X, i + 1 ) ); |
| p = X->p + i; |
| } |
| |
| *p += c; c = ( *p < c ); i++; p++; |
| } |
| |
| cleanup: |
| |
| return( ret ); |
| } |
| |
| /** |
| * Helper for mbedtls_mpi subtraction. |
| * |
| * Calculate l - r where l and r have the same size. |
| * This function operates modulo (2^ciL)^n and returns the carry |
| * (1 if there was a wraparound, i.e. if `l < r`, and 0 otherwise). |
| * |
| * d may be aliased to l or r. |
| * |
| * \param n Number of limbs of \p d, \p l and \p r. |
| * \param[out] d The result of the subtraction. |
| * \param[in] l The left operand. |
| * \param[in] r The right operand. |
| * |
| * \return 1 if `l < r`. |
| * 0 if `l >= r`. |
| */ |
| static mbedtls_mpi_uint mpi_sub_hlp( size_t n, |
| mbedtls_mpi_uint *d, |
| const mbedtls_mpi_uint *l, |
| const mbedtls_mpi_uint *r ) |
| { |
| size_t i; |
| mbedtls_mpi_uint c = 0, t, z; |
| |
| for( i = 0; i < n; i++ ) |
| { |
| z = ( l[i] < c ); t = l[i] - c; |
| c = ( t < r[i] ) + z; d[i] = t - r[i]; |
| } |
| |
| return( c ); |
| } |
| |
| /* |
| * Unsigned subtraction: X = |A| - |B| (HAC 14.9, 14.10) |
| */ |
| int mbedtls_mpi_sub_abs( mbedtls_mpi *X, const mbedtls_mpi *A, const mbedtls_mpi *B ) |
| { |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; |
| size_t n; |
| mbedtls_mpi_uint carry; |
| MPI_VALIDATE_RET( X != NULL ); |
| MPI_VALIDATE_RET( A != NULL ); |
| MPI_VALIDATE_RET( B != NULL ); |
| |
| for( n = B->n; n > 0; n-- ) |
| if( B->p[n - 1] != 0 ) |
| break; |
| if( n > A->n ) |
| { |
| /* B >= (2^ciL)^n > A */ |
| ret = MBEDTLS_ERR_MPI_NEGATIVE_VALUE; |
| goto cleanup; |
| } |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_grow( X, A->n ) ); |
| |
| /* Set the high limbs of X to match A. Don't touch the lower limbs |
| * because X might be aliased to B, and we must not overwrite the |
| * significant digits of B. */ |
| if( A->n > n ) |
| memcpy( X->p + n, A->p + n, ( A->n - n ) * ciL ); |
| if( X->n > A->n ) |
| memset( X->p + A->n, 0, ( X->n - A->n ) * ciL ); |
| |
| carry = mpi_sub_hlp( n, X->p, A->p, B->p ); |
| if( carry != 0 ) |
| { |
| /* Propagate the carry to the first nonzero limb of X. */ |
| for( ; n < X->n && X->p[n] == 0; n++ ) |
| --X->p[n]; |
| /* If we ran out of space for the carry, it means that the result |
| * is negative. */ |
| if( n == X->n ) |
| { |
| ret = MBEDTLS_ERR_MPI_NEGATIVE_VALUE; |
| goto cleanup; |
| } |
| --X->p[n]; |
| } |
| |
| /* X should always be positive as a result of unsigned subtractions. */ |
| X->s = 1; |
| |
| cleanup: |
| return( ret ); |
| } |
| |
| /* |
| * Signed addition: X = A + B |
| */ |
| int mbedtls_mpi_add_mpi( mbedtls_mpi *X, const mbedtls_mpi *A, const mbedtls_mpi *B ) |
| { |
| int ret, s; |
| MPI_VALIDATE_RET( X != NULL ); |
| MPI_VALIDATE_RET( A != NULL ); |
| MPI_VALIDATE_RET( B != NULL ); |
| |
| s = A->s; |
| if( A->s * B->s < 0 ) |
| { |
| if( mbedtls_mpi_cmp_abs( A, B ) >= 0 ) |
| { |
| MBEDTLS_MPI_CHK( mbedtls_mpi_sub_abs( X, A, B ) ); |
| X->s = s; |
| } |
| else |
| { |
| MBEDTLS_MPI_CHK( mbedtls_mpi_sub_abs( X, B, A ) ); |
| X->s = -s; |
| } |
| } |
| else |
| { |
| MBEDTLS_MPI_CHK( mbedtls_mpi_add_abs( X, A, B ) ); |
| X->s = s; |
| } |
| |
| cleanup: |
| |
| return( ret ); |
| } |
| |
| /* |
| * Signed subtraction: X = A - B |
| */ |
| int mbedtls_mpi_sub_mpi( mbedtls_mpi *X, const mbedtls_mpi *A, const mbedtls_mpi *B ) |
| { |
| int ret, s; |
| MPI_VALIDATE_RET( X != NULL ); |
| MPI_VALIDATE_RET( A != NULL ); |
| MPI_VALIDATE_RET( B != NULL ); |
| |
| s = A->s; |
| if( A->s * B->s > 0 ) |
| { |
| if( mbedtls_mpi_cmp_abs( A, B ) >= 0 ) |
| { |
| MBEDTLS_MPI_CHK( mbedtls_mpi_sub_abs( X, A, B ) ); |
| X->s = s; |
| } |
| else |
| { |
| MBEDTLS_MPI_CHK( mbedtls_mpi_sub_abs( X, B, A ) ); |
| X->s = -s; |
| } |
| } |
| else |
| { |
| MBEDTLS_MPI_CHK( mbedtls_mpi_add_abs( X, A, B ) ); |
| X->s = s; |
| } |
| |
| cleanup: |
| |
| return( ret ); |
| } |
| |
| /* |
| * Signed addition: X = A + b |
| */ |
| int mbedtls_mpi_add_int( mbedtls_mpi *X, const mbedtls_mpi *A, mbedtls_mpi_sint b ) |
| { |
| mbedtls_mpi _B; |
| mbedtls_mpi_uint p[1]; |
| MPI_VALIDATE_RET( X != NULL ); |
| MPI_VALIDATE_RET( A != NULL ); |
| |
| p[0] = ( b < 0 ) ? -b : b; |
| _B.s = ( b < 0 ) ? -1 : 1; |
| _B.n = 1; |
| _B.p = p; |
| |
| return( mbedtls_mpi_add_mpi( X, A, &_B ) ); |
| } |
| |
| /* |
| * Signed subtraction: X = A - b |
| */ |
| int mbedtls_mpi_sub_int( mbedtls_mpi *X, const mbedtls_mpi *A, mbedtls_mpi_sint b ) |
| { |
| mbedtls_mpi _B; |
| mbedtls_mpi_uint p[1]; |
| MPI_VALIDATE_RET( X != NULL ); |
| MPI_VALIDATE_RET( A != NULL ); |
| |
| p[0] = ( b < 0 ) ? -b : b; |
| _B.s = ( b < 0 ) ? -1 : 1; |
| _B.n = 1; |
| _B.p = p; |
| |
| return( mbedtls_mpi_sub_mpi( X, A, &_B ) ); |
| } |
| |
| /** Helper for mbedtls_mpi multiplication. |
| * |
| * Add \p b * \p s to \p d. |
| * |
| * \param i The number of limbs of \p s. |
| * \param[in] s A bignum to multiply, of size \p i. |
| * It may overlap with \p d, but only if |
| * \p d <= \p s. |
| * Its leading limb must not be \c 0. |
| * \param[in,out] d The bignum to add to. |
| * It must be sufficiently large to store the |
| * result of the multiplication. This means |
| * \p i + 1 limbs if \p d[\p i - 1] started as 0 and \p b |
| * is not known a priori. |
| * \param b A scalar to multiply. |
| */ |
| static |
| #if defined(__APPLE__) && defined(__arm__) |
| /* |
| * Apple LLVM version 4.2 (clang-425.0.24) (based on LLVM 3.2svn) |
| * appears to need this to prevent bad ARM code generation at -O3. |
| */ |
| __attribute__ ((noinline)) |
| #endif |
| void mpi_mul_hlp( size_t i, |
| const mbedtls_mpi_uint *s, |
| mbedtls_mpi_uint *d, |
| mbedtls_mpi_uint b ) |
| { |
| mbedtls_mpi_uint c = 0, t = 0; |
| |
| #if defined(MULADDC_HUIT) |
| for( ; i >= 8; i -= 8 ) |
| { |
| MULADDC_INIT |
| MULADDC_HUIT |
| MULADDC_STOP |
| } |
| |
| for( ; i > 0; i-- ) |
| { |
| MULADDC_INIT |
| MULADDC_CORE |
| MULADDC_STOP |
| } |
| #else /* MULADDC_HUIT */ |
| for( ; i >= 16; i -= 16 ) |
| { |
| MULADDC_INIT |
| MULADDC_CORE MULADDC_CORE |
| MULADDC_CORE MULADDC_CORE |
| MULADDC_CORE MULADDC_CORE |
| MULADDC_CORE MULADDC_CORE |
| |
| MULADDC_CORE MULADDC_CORE |
| MULADDC_CORE MULADDC_CORE |
| MULADDC_CORE MULADDC_CORE |
| MULADDC_CORE MULADDC_CORE |
| MULADDC_STOP |
| } |
| |
| for( ; i >= 8; i -= 8 ) |
| { |
| MULADDC_INIT |
| MULADDC_CORE MULADDC_CORE |
| MULADDC_CORE MULADDC_CORE |
| |
| MULADDC_CORE MULADDC_CORE |
| MULADDC_CORE MULADDC_CORE |
| MULADDC_STOP |
| } |
| |
| for( ; i > 0; i-- ) |
| { |
| MULADDC_INIT |
| MULADDC_CORE |
| MULADDC_STOP |
| } |
| #endif /* MULADDC_HUIT */ |
| |
| t++; |
| |
| while( c != 0 ) |
| { |
| *d += c; c = ( *d < c ); d++; |
| } |
| } |
| |
| /* |
| * Baseline multiplication: X = A * B (HAC 14.12) |
| */ |
| int mbedtls_mpi_mul_mpi( mbedtls_mpi *X, const mbedtls_mpi *A, const mbedtls_mpi *B ) |
| { |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; |
| size_t i, j; |
| mbedtls_mpi TA, TB; |
| int result_is_zero = 0; |
| MPI_VALIDATE_RET( X != NULL ); |
| MPI_VALIDATE_RET( A != NULL ); |
| MPI_VALIDATE_RET( B != NULL ); |
| |
| mbedtls_mpi_init( &TA ); mbedtls_mpi_init( &TB ); |
| |
| if( X == A ) { MBEDTLS_MPI_CHK( mbedtls_mpi_copy( &TA, A ) ); A = &TA; } |
| if( X == B ) { MBEDTLS_MPI_CHK( mbedtls_mpi_copy( &TB, B ) ); B = &TB; } |
| |
| for( i = A->n; i > 0; i-- ) |
| if( A->p[i - 1] != 0 ) |
| break; |
| if( i == 0 ) |
| result_is_zero = 1; |
| |
| for( j = B->n; j > 0; j-- ) |
| if( B->p[j - 1] != 0 ) |
| break; |
| if( j == 0 ) |
| result_is_zero = 1; |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_grow( X, i + j ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_lset( X, 0 ) ); |
| |
| for( ; j > 0; j-- ) |
| mpi_mul_hlp( i, A->p, X->p + j - 1, B->p[j - 1] ); |
| |
| /* If the result is 0, we don't shortcut the operation, which reduces |
| * but does not eliminate side channels leaking the zero-ness. We do |
| * need to take care to set the sign bit properly since the library does |
| * not fully support an MPI object with a value of 0 and s == -1. */ |
| if( result_is_zero ) |
| X->s = 1; |
| else |
| X->s = A->s * B->s; |
| |
| cleanup: |
| |
| mbedtls_mpi_free( &TB ); mbedtls_mpi_free( &TA ); |
| |
| return( ret ); |
| } |
| |
| /* |
| * Baseline multiplication: X = A * b |
| */ |
| int mbedtls_mpi_mul_int( mbedtls_mpi *X, const mbedtls_mpi *A, mbedtls_mpi_uint b ) |
| { |
| MPI_VALIDATE_RET( X != NULL ); |
| MPI_VALIDATE_RET( A != NULL ); |
| |
| /* mpi_mul_hlp can't deal with a leading 0. */ |
| size_t n = A->n; |
| while( n > 0 && A->p[n - 1] == 0 ) |
| --n; |
| |
| /* The general method below doesn't work if n==0 or b==0. By chance |
| * calculating the result is trivial in those cases. */ |
| if( b == 0 || n == 0 ) |
| { |
| return( mbedtls_mpi_lset( X, 0 ) ); |
| } |
| |
| /* Calculate A*b as A + A*(b-1) to take advantage of mpi_mul_hlp */ |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; |
| /* In general, A * b requires 1 limb more than b. If |
| * A->p[n - 1] * b / b == A->p[n - 1], then A * b fits in the same |
| * number of limbs as A and the call to grow() is not required since |
| * copy() will take care of the growth if needed. However, experimentally, |
| * making the call to grow() unconditional causes slightly fewer |
| * calls to calloc() in ECP code, presumably because it reuses the |
| * same mpi for a while and this way the mpi is more likely to directly |
| * grow to its final size. */ |
| MBEDTLS_MPI_CHK( mbedtls_mpi_grow( X, n + 1 ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_copy( X, A ) ); |
| mpi_mul_hlp( n, A->p, X->p, b - 1 ); |
| |
| cleanup: |
| return( ret ); |
| } |
| |
| /* |
| * Unsigned integer divide - double mbedtls_mpi_uint dividend, u1/u0, and |
| * mbedtls_mpi_uint divisor, d |
| */ |
| static mbedtls_mpi_uint mbedtls_int_div_int( mbedtls_mpi_uint u1, |
| mbedtls_mpi_uint u0, mbedtls_mpi_uint d, mbedtls_mpi_uint *r ) |
| { |
| #if defined(MBEDTLS_HAVE_UDBL) |
| mbedtls_t_udbl dividend, quotient; |
| #else |
| const mbedtls_mpi_uint radix = (mbedtls_mpi_uint) 1 << biH; |
| const mbedtls_mpi_uint uint_halfword_mask = ( (mbedtls_mpi_uint) 1 << biH ) - 1; |
| mbedtls_mpi_uint d0, d1, q0, q1, rAX, r0, quotient; |
| mbedtls_mpi_uint u0_msw, u0_lsw; |
| size_t s; |
| #endif |
| |
| /* |
| * Check for overflow |
| */ |
| if( 0 == d || u1 >= d ) |
| { |
| if (r != NULL) *r = ~0; |
| |
| return ( ~0 ); |
| } |
| |
| #if defined(MBEDTLS_HAVE_UDBL) |
| dividend = (mbedtls_t_udbl) u1 << biL; |
| dividend |= (mbedtls_t_udbl) u0; |
| quotient = dividend / d; |
| if( quotient > ( (mbedtls_t_udbl) 1 << biL ) - 1 ) |
| quotient = ( (mbedtls_t_udbl) 1 << biL ) - 1; |
| |
| if( r != NULL ) |
| *r = (mbedtls_mpi_uint)( dividend - (quotient * d ) ); |
| |
| return (mbedtls_mpi_uint) quotient; |
| #else |
| |
| /* |
| * Algorithm D, Section 4.3.1 - The Art of Computer Programming |
| * Vol. 2 - Seminumerical Algorithms, Knuth |
| */ |
| |
| /* |
| * Normalize the divisor, d, and dividend, u0, u1 |
| */ |
| s = mbedtls_clz( d ); |
| d = d << s; |
| |
| u1 = u1 << s; |
| u1 |= ( u0 >> ( biL - s ) ) & ( -(mbedtls_mpi_sint)s >> ( biL - 1 ) ); |
| u0 = u0 << s; |
| |
| d1 = d >> biH; |
| d0 = d & uint_halfword_mask; |
| |
| u0_msw = u0 >> biH; |
| u0_lsw = u0 & uint_halfword_mask; |
| |
| /* |
| * Find the first quotient and remainder |
| */ |
| q1 = u1 / d1; |
| r0 = u1 - d1 * q1; |
| |
| while( q1 >= radix || ( q1 * d0 > radix * r0 + u0_msw ) ) |
| { |
| q1 -= 1; |
| r0 += d1; |
| |
| if ( r0 >= radix ) break; |
| } |
| |
| rAX = ( u1 * radix ) + ( u0_msw - q1 * d ); |
| q0 = rAX / d1; |
| r0 = rAX - q0 * d1; |
| |
| while( q0 >= radix || ( q0 * d0 > radix * r0 + u0_lsw ) ) |
| { |
| q0 -= 1; |
| r0 += d1; |
| |
| if ( r0 >= radix ) break; |
| } |
| |
| if (r != NULL) |
| *r = ( rAX * radix + u0_lsw - q0 * d ) >> s; |
| |
| quotient = q1 * radix + q0; |
| |
| return quotient; |
| #endif |
| } |
| |
| /* |
| * Division by mbedtls_mpi: A = Q * B + R (HAC 14.20) |
| */ |
| int mbedtls_mpi_div_mpi( mbedtls_mpi *Q, mbedtls_mpi *R, const mbedtls_mpi *A, |
| const mbedtls_mpi *B ) |
| { |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; |
| size_t i, n, t, k; |
| mbedtls_mpi X, Y, Z, T1, T2; |
| mbedtls_mpi_uint TP2[3]; |
| MPI_VALIDATE_RET( A != NULL ); |
| MPI_VALIDATE_RET( B != NULL ); |
| |
| if( mbedtls_mpi_cmp_int( B, 0 ) == 0 ) |
| return( MBEDTLS_ERR_MPI_DIVISION_BY_ZERO ); |
| |
| mbedtls_mpi_init( &X ); mbedtls_mpi_init( &Y ); mbedtls_mpi_init( &Z ); |
| mbedtls_mpi_init( &T1 ); |
| /* |
| * Avoid dynamic memory allocations for constant-size T2. |
| * |
| * T2 is used for comparison only and the 3 limbs are assigned explicitly, |
| * so nobody increase the size of the MPI and we're safe to use an on-stack |
| * buffer. |
| */ |
| T2.s = 1; |
| T2.n = sizeof( TP2 ) / sizeof( *TP2 ); |
| T2.p = TP2; |
| |
| if( mbedtls_mpi_cmp_abs( A, B ) < 0 ) |
| { |
| if( Q != NULL ) MBEDTLS_MPI_CHK( mbedtls_mpi_lset( Q, 0 ) ); |
| if( R != NULL ) MBEDTLS_MPI_CHK( mbedtls_mpi_copy( R, A ) ); |
| return( 0 ); |
| } |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_copy( &X, A ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_copy( &Y, B ) ); |
| X.s = Y.s = 1; |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_grow( &Z, A->n + 2 ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_lset( &Z, 0 ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_grow( &T1, A->n + 2 ) ); |
| |
| k = mbedtls_mpi_bitlen( &Y ) % biL; |
| if( k < biL - 1 ) |
| { |
| k = biL - 1 - k; |
| MBEDTLS_MPI_CHK( mbedtls_mpi_shift_l( &X, k ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_shift_l( &Y, k ) ); |
| } |
| else k = 0; |
| |
| n = X.n - 1; |
| t = Y.n - 1; |
| MBEDTLS_MPI_CHK( mbedtls_mpi_shift_l( &Y, biL * ( n - t ) ) ); |
| |
| while( mbedtls_mpi_cmp_mpi( &X, &Y ) >= 0 ) |
| { |
| Z.p[n - t]++; |
| MBEDTLS_MPI_CHK( mbedtls_mpi_sub_mpi( &X, &X, &Y ) ); |
| } |
| MBEDTLS_MPI_CHK( mbedtls_mpi_shift_r( &Y, biL * ( n - t ) ) ); |
| |
| for( i = n; i > t ; i-- ) |
| { |
| if( X.p[i] >= Y.p[t] ) |
| Z.p[i - t - 1] = ~0; |
| else |
| { |
| Z.p[i - t - 1] = mbedtls_int_div_int( X.p[i], X.p[i - 1], |
| Y.p[t], NULL); |
| } |
| |
| T2.p[0] = ( i < 2 ) ? 0 : X.p[i - 2]; |
| T2.p[1] = ( i < 1 ) ? 0 : X.p[i - 1]; |
| T2.p[2] = X.p[i]; |
| |
| Z.p[i - t - 1]++; |
| do |
| { |
| Z.p[i - t - 1]--; |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_lset( &T1, 0 ) ); |
| T1.p[0] = ( t < 1 ) ? 0 : Y.p[t - 1]; |
| T1.p[1] = Y.p[t]; |
| MBEDTLS_MPI_CHK( mbedtls_mpi_mul_int( &T1, &T1, Z.p[i - t - 1] ) ); |
| } |
| while( mbedtls_mpi_cmp_mpi( &T1, &T2 ) > 0 ); |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_mul_int( &T1, &Y, Z.p[i - t - 1] ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_shift_l( &T1, biL * ( i - t - 1 ) ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_sub_mpi( &X, &X, &T1 ) ); |
| |
| if( mbedtls_mpi_cmp_int( &X, 0 ) < 0 ) |
| { |
| MBEDTLS_MPI_CHK( mbedtls_mpi_copy( &T1, &Y ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_shift_l( &T1, biL * ( i - t - 1 ) ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_add_mpi( &X, &X, &T1 ) ); |
| Z.p[i - t - 1]--; |
| } |
| } |
| |
| if( Q != NULL ) |
| { |
| MBEDTLS_MPI_CHK( mbedtls_mpi_copy( Q, &Z ) ); |
| Q->s = A->s * B->s; |
| } |
| |
| if( R != NULL ) |
| { |
| MBEDTLS_MPI_CHK( mbedtls_mpi_shift_r( &X, k ) ); |
| X.s = A->s; |
| MBEDTLS_MPI_CHK( mbedtls_mpi_copy( R, &X ) ); |
| |
| if( mbedtls_mpi_cmp_int( R, 0 ) == 0 ) |
| R->s = 1; |
| } |
| |
| cleanup: |
| |
| mbedtls_mpi_free( &X ); mbedtls_mpi_free( &Y ); mbedtls_mpi_free( &Z ); |
| mbedtls_mpi_free( &T1 ); |
| mbedtls_platform_zeroize( TP2, sizeof( TP2 ) ); |
| |
| return( ret ); |
| } |
| |
| /* |
| * Division by int: A = Q * b + R |
| */ |
| int mbedtls_mpi_div_int( mbedtls_mpi *Q, mbedtls_mpi *R, |
| const mbedtls_mpi *A, |
| mbedtls_mpi_sint b ) |
| { |
| mbedtls_mpi _B; |
| mbedtls_mpi_uint p[1]; |
| MPI_VALIDATE_RET( A != NULL ); |
| |
| p[0] = ( b < 0 ) ? -b : b; |
| _B.s = ( b < 0 ) ? -1 : 1; |
| _B.n = 1; |
| _B.p = p; |
| |
| return( mbedtls_mpi_div_mpi( Q, R, A, &_B ) ); |
| } |
| |
| /* |
| * Modulo: R = A mod B |
| */ |
| int mbedtls_mpi_mod_mpi( mbedtls_mpi *R, const mbedtls_mpi *A, const mbedtls_mpi *B ) |
| { |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; |
| MPI_VALIDATE_RET( R != NULL ); |
| MPI_VALIDATE_RET( A != NULL ); |
| MPI_VALIDATE_RET( B != NULL ); |
| |
| if( mbedtls_mpi_cmp_int( B, 0 ) < 0 ) |
| return( MBEDTLS_ERR_MPI_NEGATIVE_VALUE ); |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_div_mpi( NULL, R, A, B ) ); |
| |
| while( mbedtls_mpi_cmp_int( R, 0 ) < 0 ) |
| MBEDTLS_MPI_CHK( mbedtls_mpi_add_mpi( R, R, B ) ); |
| |
| while( mbedtls_mpi_cmp_mpi( R, B ) >= 0 ) |
| MBEDTLS_MPI_CHK( mbedtls_mpi_sub_mpi( R, R, B ) ); |
| |
| cleanup: |
| |
| return( ret ); |
| } |
| |
| /* |
| * Modulo: r = A mod b |
| */ |
| int mbedtls_mpi_mod_int( mbedtls_mpi_uint *r, const mbedtls_mpi *A, mbedtls_mpi_sint b ) |
| { |
| size_t i; |
| mbedtls_mpi_uint x, y, z; |
| MPI_VALIDATE_RET( r != NULL ); |
| MPI_VALIDATE_RET( A != NULL ); |
| |
| if( b == 0 ) |
| return( MBEDTLS_ERR_MPI_DIVISION_BY_ZERO ); |
| |
| if( b < 0 ) |
| return( MBEDTLS_ERR_MPI_NEGATIVE_VALUE ); |
| |
| /* |
| * handle trivial cases |
| */ |
| if( b == 1 ) |
| { |
| *r = 0; |
| return( 0 ); |
| } |
| |
| if( b == 2 ) |
| { |
| *r = A->p[0] & 1; |
| return( 0 ); |
| } |
| |
| /* |
| * general case |
| */ |
| for( i = A->n, y = 0; i > 0; i-- ) |
| { |
| x = A->p[i - 1]; |
| y = ( y << biH ) | ( x >> biH ); |
| z = y / b; |
| y -= z * b; |
| |
| x <<= biH; |
| y = ( y << biH ) | ( x >> biH ); |
| z = y / b; |
| y -= z * b; |
| } |
| |
| /* |
| * If A is negative, then the current y represents a negative value. |
| * Flipping it to the positive side. |
| */ |
| if( A->s < 0 && y != 0 ) |
| y = b - y; |
| |
| *r = y; |
| |
| return( 0 ); |
| } |
| |
| /* |
| * Fast Montgomery initialization (thanks to Tom St Denis) |
| */ |
| static void mpi_montg_init( mbedtls_mpi_uint *mm, const mbedtls_mpi *N ) |
| { |
| mbedtls_mpi_uint x, m0 = N->p[0]; |
| unsigned int i; |
| |
| x = m0; |
| x += ( ( m0 + 2 ) & 4 ) << 1; |
| |
| for( i = biL; i >= 8; i /= 2 ) |
| x *= ( 2 - ( m0 * x ) ); |
| |
| *mm = ~x + 1; |
| } |
| |
| /** Montgomery multiplication: A = A * B * R^-1 mod N (HAC 14.36) |
| * |
| * \param[in,out] A One of the numbers to multiply. |
| * It must have at least as many limbs as N |
| * (A->n >= N->n), and any limbs beyond n are ignored. |
| * On successful completion, A contains the result of |
| * the multiplication A * B * R^-1 mod N where |
| * R = (2^ciL)^n. |
| * \param[in] B One of the numbers to multiply. |
| * It must be nonzero and must not have more limbs than N |
| * (B->n <= N->n). |
| * \param[in] N The modulo. N must be odd. |
| * \param mm The value calculated by `mpi_montg_init(&mm, N)`. |
| * This is -N^-1 mod 2^ciL. |
| * \param[in,out] T A bignum for temporary storage. |
| * It must be at least twice the limb size of N plus 2 |
| * (T->n >= 2 * (N->n + 1)). |
| * Its initial content is unused and |
| * its final content is indeterminate. |
| * Note that unlike the usual convention in the library |
| * for `const mbedtls_mpi*`, the content of T can change. |
| */ |
| static void mpi_montmul( mbedtls_mpi *A, const mbedtls_mpi *B, const mbedtls_mpi *N, mbedtls_mpi_uint mm, |
| const mbedtls_mpi *T ) |
| { |
| size_t i, n, m; |
| mbedtls_mpi_uint u0, u1, *d; |
| |
| memset( T->p, 0, T->n * ciL ); |
| |
| d = T->p; |
| n = N->n; |
| m = ( B->n < n ) ? B->n : n; |
| |
| for( i = 0; i < n; i++ ) |
| { |
| /* |
| * T = (T + u0*B + u1*N) / 2^biL |
| */ |
| u0 = A->p[i]; |
| u1 = ( d[0] + u0 * B->p[0] ) * mm; |
| |
| mpi_mul_hlp( m, B->p, d, u0 ); |
| mpi_mul_hlp( n, N->p, d, u1 ); |
| |
| *d++ = u0; d[n + 1] = 0; |
| } |
| |
| /* At this point, d is either the desired result or the desired result |
| * plus N. We now potentially subtract N, avoiding leaking whether the |
| * subtraction is performed through side channels. */ |
| |
| /* Copy the n least significant limbs of d to A, so that |
| * A = d if d < N (recall that N has n limbs). */ |
| memcpy( A->p, d, n * ciL ); |
| /* If d >= N then we want to set A to d - N. To prevent timing attacks, |
| * do the calculation without using conditional tests. */ |
| /* Set d to d0 + (2^biL)^n - N where d0 is the current value of d. */ |
| d[n] += 1; |
| d[n] -= mpi_sub_hlp( n, d, d, N->p ); |
| /* If d0 < N then d < (2^biL)^n |
| * so d[n] == 0 and we want to keep A as it is. |
| * If d0 >= N then d >= (2^biL)^n, and d <= (2^biL)^n + N < 2 * (2^biL)^n |
| * so d[n] == 1 and we want to set A to the result of the subtraction |
| * which is d - (2^biL)^n, i.e. the n least significant limbs of d. |
| * This exactly corresponds to a conditional assignment. */ |
| mpi_safe_cond_assign( n, A->p, d, (unsigned char) d[n] ); |
| } |
| |
| /* |
| * Montgomery reduction: A = A * R^-1 mod N |
| * |
| * See mpi_montmul() regarding constraints and guarantees on the parameters. |
| */ |
| static void mpi_montred( mbedtls_mpi *A, const mbedtls_mpi *N, |
| mbedtls_mpi_uint mm, const mbedtls_mpi *T ) |
| { |
| mbedtls_mpi_uint z = 1; |
| mbedtls_mpi U; |
| |
| U.n = U.s = (int) z; |
| U.p = &z; |
| |
| mpi_montmul( A, &U, N, mm, T ); |
| } |
| |
| /* |
| * Sliding-window exponentiation: X = A^E mod N (HAC 14.85) |
| */ |
| int mbedtls_mpi_exp_mod( mbedtls_mpi *X, const mbedtls_mpi *A, |
| const mbedtls_mpi *E, const mbedtls_mpi *N, |
| mbedtls_mpi *_RR ) |
| { |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; |
| size_t wbits, wsize, one = 1; |
| size_t i, j, nblimbs; |
| size_t bufsize, nbits; |
| mbedtls_mpi_uint ei, mm, state; |
| mbedtls_mpi RR, T, W[ 1 << MBEDTLS_MPI_WINDOW_SIZE ], Apos; |
| int neg; |
| |
| MPI_VALIDATE_RET( X != NULL ); |
| MPI_VALIDATE_RET( A != NULL ); |
| MPI_VALIDATE_RET( E != NULL ); |
| MPI_VALIDATE_RET( N != NULL ); |
| |
| if( mbedtls_mpi_cmp_int( N, 0 ) <= 0 || ( N->p[0] & 1 ) == 0 ) |
| return( MBEDTLS_ERR_MPI_BAD_INPUT_DATA ); |
| |
| if( mbedtls_mpi_cmp_int( E, 0 ) < 0 ) |
| return( MBEDTLS_ERR_MPI_BAD_INPUT_DATA ); |
| |
| if( mbedtls_mpi_bitlen( E ) > MBEDTLS_MPI_MAX_BITS || |
| mbedtls_mpi_bitlen( N ) > MBEDTLS_MPI_MAX_BITS ) |
| return ( MBEDTLS_ERR_MPI_BAD_INPUT_DATA ); |
| |
| /* |
| * Init temps and window size |
| */ |
| mpi_montg_init( &mm, N ); |
| mbedtls_mpi_init( &RR ); mbedtls_mpi_init( &T ); |
| mbedtls_mpi_init( &Apos ); |
| memset( W, 0, sizeof( W ) ); |
| |
| i = mbedtls_mpi_bitlen( E ); |
| |
| wsize = ( i > 671 ) ? 6 : ( i > 239 ) ? 5 : |
| ( i > 79 ) ? 4 : ( i > 23 ) ? 3 : 1; |
| |
| #if( MBEDTLS_MPI_WINDOW_SIZE < 6 ) |
| if( wsize > MBEDTLS_MPI_WINDOW_SIZE ) |
| wsize = MBEDTLS_MPI_WINDOW_SIZE; |
| #endif |
| |
| j = N->n + 1; |
| /* All W[i] and X must have at least N->n limbs for the mpi_montmul() |
| * and mpi_montred() calls later. Here we ensure that W[1] and X are |
| * large enough, and later we'll grow other W[i] to the same length. |
| * They must not be shrunk midway through this function! |
| */ |
| MBEDTLS_MPI_CHK( mbedtls_mpi_grow( X, j ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_grow( &W[1], j ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_grow( &T, j * 2 ) ); |
| |
| /* |
| * Compensate for negative A (and correct at the end) |
| */ |
| neg = ( A->s == -1 ); |
| if( neg ) |
| { |
| MBEDTLS_MPI_CHK( mbedtls_mpi_copy( &Apos, A ) ); |
| Apos.s = 1; |
| A = &Apos; |
| } |
| |
| /* |
| * If 1st call, pre-compute R^2 mod N |
| */ |
| if( _RR == NULL || _RR->p == NULL ) |
| { |
| MBEDTLS_MPI_CHK( mbedtls_mpi_lset( &RR, 1 ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_shift_l( &RR, N->n * 2 * biL ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_mod_mpi( &RR, &RR, N ) ); |
| |
| if( _RR != NULL ) |
| memcpy( _RR, &RR, sizeof( mbedtls_mpi ) ); |
| } |
| else |
| memcpy( &RR, _RR, sizeof( mbedtls_mpi ) ); |
| |
| /* |
| * W[1] = A * R^2 * R^-1 mod N = A * R mod N |
| */ |
| if( mbedtls_mpi_cmp_mpi( A, N ) >= 0 ) |
| { |
| MBEDTLS_MPI_CHK( mbedtls_mpi_mod_mpi( &W[1], A, N ) ); |
| /* This should be a no-op because W[1] is already that large before |
| * mbedtls_mpi_mod_mpi(), but it's necessary to avoid an overflow |
| * in mpi_montmul() below, so let's make sure. */ |
| MBEDTLS_MPI_CHK( mbedtls_mpi_grow( &W[1], N->n + 1 ) ); |
| } |
| else |
| MBEDTLS_MPI_CHK( mbedtls_mpi_copy( &W[1], A ) ); |
| |
| /* Note that this is safe because W[1] always has at least N->n limbs |
| * (it grew above and was preserved by mbedtls_mpi_copy()). */ |
| mpi_montmul( &W[1], &RR, N, mm, &T ); |
| |
| /* |
| * X = R^2 * R^-1 mod N = R mod N |
| */ |
| MBEDTLS_MPI_CHK( mbedtls_mpi_copy( X, &RR ) ); |
| mpi_montred( X, N, mm, &T ); |
| |
| if( wsize > 1 ) |
| { |
| /* |
| * W[1 << (wsize - 1)] = W[1] ^ (wsize - 1) |
| */ |
| j = one << ( wsize - 1 ); |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_grow( &W[j], N->n + 1 ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_copy( &W[j], &W[1] ) ); |
| |
| for( i = 0; i < wsize - 1; i++ ) |
| mpi_montmul( &W[j], &W[j], N, mm, &T ); |
| |
| /* |
| * W[i] = W[i - 1] * W[1] |
| */ |
| for( i = j + 1; i < ( one << wsize ); i++ ) |
| { |
| MBEDTLS_MPI_CHK( mbedtls_mpi_grow( &W[i], N->n + 1 ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_copy( &W[i], &W[i - 1] ) ); |
| |
| mpi_montmul( &W[i], &W[1], N, mm, &T ); |
| } |
| } |
| |
| nblimbs = E->n; |
| bufsize = 0; |
| nbits = 0; |
| wbits = 0; |
| state = 0; |
| |
| while( 1 ) |
| { |
| if( bufsize == 0 ) |
| { |
| if( nblimbs == 0 ) |
| break; |
| |
| nblimbs--; |
| |
| bufsize = sizeof( mbedtls_mpi_uint ) << 3; |
| } |
| |
| bufsize--; |
| |
| ei = (E->p[nblimbs] >> bufsize) & 1; |
| |
| /* |
| * skip leading 0s |
| */ |
| if( ei == 0 && state == 0 ) |
| continue; |
| |
| if( ei == 0 && state == 1 ) |
| { |
| /* |
| * out of window, square X |
| */ |
| mpi_montmul( X, X, N, mm, &T ); |
| continue; |
| } |
| |
| /* |
| * add ei to current window |
| */ |
| state = 2; |
| |
| nbits++; |
| wbits |= ( ei << ( wsize - nbits ) ); |
| |
| if( nbits == wsize ) |
| { |
| /* |
| * X = X^wsize R^-1 mod N |
| */ |
| for( i = 0; i < wsize; i++ ) |
| mpi_montmul( X, X, N, mm, &T ); |
| |
| /* |
| * X = X * W[wbits] R^-1 mod N |
| */ |
| mpi_montmul( X, &W[wbits], N, mm, &T ); |
| |
| state--; |
| nbits = 0; |
| wbits = 0; |
| } |
| } |
| |
| /* |
| * process the remaining bits |
| */ |
| for( i = 0; i < nbits; i++ ) |
| { |
| mpi_montmul( X, X, N, mm, &T ); |
| |
| wbits <<= 1; |
| |
| if( ( wbits & ( one << wsize ) ) != 0 ) |
| mpi_montmul( X, &W[1], N, mm, &T ); |
| } |
| |
| /* |
| * X = A^E * R * R^-1 mod N = A^E mod N |
| */ |
| mpi_montred( X, N, mm, &T ); |
| |
| if( neg && E->n != 0 && ( E->p[0] & 1 ) != 0 ) |
| { |
| X->s = -1; |
| MBEDTLS_MPI_CHK( mbedtls_mpi_add_mpi( X, N, X ) ); |
| } |
| |
| cleanup: |
| |
| for( i = ( one << ( wsize - 1 ) ); i < ( one << wsize ); i++ ) |
| mbedtls_mpi_free( &W[i] ); |
| |
| mbedtls_mpi_free( &W[1] ); mbedtls_mpi_free( &T ); mbedtls_mpi_free( &Apos ); |
| |
| if( _RR == NULL || _RR->p == NULL ) |
| mbedtls_mpi_free( &RR ); |
| |
| return( ret ); |
| } |
| |
| /* |
| * Greatest common divisor: G = gcd(A, B) (HAC 14.54) |
| */ |
| int mbedtls_mpi_gcd( mbedtls_mpi *G, const mbedtls_mpi *A, const mbedtls_mpi *B ) |
| { |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; |
| size_t lz, lzt; |
| mbedtls_mpi TA, TB; |
| |
| MPI_VALIDATE_RET( G != NULL ); |
| MPI_VALIDATE_RET( A != NULL ); |
| MPI_VALIDATE_RET( B != NULL ); |
| |
| mbedtls_mpi_init( &TA ); mbedtls_mpi_init( &TB ); |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_copy( &TA, A ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_copy( &TB, B ) ); |
| |
| lz = mbedtls_mpi_lsb( &TA ); |
| lzt = mbedtls_mpi_lsb( &TB ); |
| |
| /* The loop below gives the correct result when A==0 but not when B==0. |
| * So have a special case for B==0. Leverage the fact that we just |
| * calculated the lsb and lsb(B)==0 iff B is odd or 0 to make the test |
| * slightly more efficient than cmp_int(). */ |
| if( lzt == 0 && mbedtls_mpi_get_bit( &TB, 0 ) == 0 ) |
| { |
| ret = mbedtls_mpi_copy( G, A ); |
| goto cleanup; |
| } |
| |
| if( lzt < lz ) |
| lz = lzt; |
| |
| TA.s = TB.s = 1; |
| |
| /* We mostly follow the procedure described in HAC 14.54, but with some |
| * minor differences: |
| * - Sequences of multiplications or divisions by 2 are grouped into a |
| * single shift operation. |
| * - The procedure in HAC assumes that 0 < TB <= TA. |
| * - The condition TB <= TA is not actually necessary for correctness. |
| * TA and TB have symmetric roles except for the loop termination |
| * condition, and the shifts at the beginning of the loop body |
| * remove any significance from the ordering of TA vs TB before |
| * the shifts. |
| * - If TA = 0, the loop goes through 0 iterations and the result is |
| * correctly TB. |
| * - The case TB = 0 was short-circuited above. |
| * |
| * For the correctness proof below, decompose the original values of |
| * A and B as |
| * A = sa * 2^a * A' with A'=0 or A' odd, and sa = +-1 |
| * B = sb * 2^b * B' with B'=0 or B' odd, and sb = +-1 |
| * Then gcd(A, B) = 2^{min(a,b)} * gcd(A',B'), |
| * and gcd(A',B') is odd or 0. |
| * |
| * At the beginning, we have TA = |A| and TB = |B| so gcd(A,B) = gcd(TA,TB). |
| * The code maintains the following invariant: |
| * gcd(A,B) = 2^k * gcd(TA,TB) for some k (I) |
| */ |
| |
| /* Proof that the loop terminates: |
| * At each iteration, either the right-shift by 1 is made on a nonzero |
| * value and the nonnegative integer bitlen(TA) + bitlen(TB) decreases |
| * by at least 1, or the right-shift by 1 is made on zero and then |
| * TA becomes 0 which ends the loop (TB cannot be 0 if it is right-shifted |
| * since in that case TB is calculated from TB-TA with the condition TB>TA). |
| */ |
| while( mbedtls_mpi_cmp_int( &TA, 0 ) != 0 ) |
| { |
| /* Divisions by 2 preserve the invariant (I). */ |
| MBEDTLS_MPI_CHK( mbedtls_mpi_shift_r( &TA, mbedtls_mpi_lsb( &TA ) ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_shift_r( &TB, mbedtls_mpi_lsb( &TB ) ) ); |
| |
| /* Set either TA or TB to |TA-TB|/2. Since TA and TB are both odd, |
| * TA-TB is even so the division by 2 has an integer result. |
| * Invariant (I) is preserved since any odd divisor of both TA and TB |
| * also divides |TA-TB|/2, and any odd divisor of both TA and |TA-TB|/2 |
| * also divides TB, and any odd divisior of both TB and |TA-TB|/2 also |
| * divides TA. |
| */ |
| if( mbedtls_mpi_cmp_mpi( &TA, &TB ) >= 0 ) |
| { |
| MBEDTLS_MPI_CHK( mbedtls_mpi_sub_abs( &TA, &TA, &TB ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_shift_r( &TA, 1 ) ); |
| } |
| else |
| { |
| MBEDTLS_MPI_CHK( mbedtls_mpi_sub_abs( &TB, &TB, &TA ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_shift_r( &TB, 1 ) ); |
| } |
| /* Note that one of TA or TB is still odd. */ |
| } |
| |
| /* By invariant (I), gcd(A,B) = 2^k * gcd(TA,TB) for some k. |
| * At the loop exit, TA = 0, so gcd(TA,TB) = TB. |
| * - If there was at least one loop iteration, then one of TA or TB is odd, |
| * and TA = 0, so TB is odd and gcd(TA,TB) = gcd(A',B'). In this case, |
| * lz = min(a,b) so gcd(A,B) = 2^lz * TB. |
| * - If there was no loop iteration, then A was 0, and gcd(A,B) = B. |
| * In this case, lz = 0 and B = TB so gcd(A,B) = B = 2^lz * TB as well. |
| */ |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_shift_l( &TB, lz ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_copy( G, &TB ) ); |
| |
| cleanup: |
| |
| mbedtls_mpi_free( &TA ); mbedtls_mpi_free( &TB ); |
| |
| return( ret ); |
| } |
| |
| /* Fill X with n_bytes random bytes. |
| * X must already have room for those bytes. |
| * The ordering of the bytes returned from the RNG is suitable for |
| * deterministic ECDSA (see RFC 6979 §3.3 and mbedtls_mpi_random()). |
| * The size and sign of X are unchanged. |
| * n_bytes must not be 0. |
| */ |
| static int mpi_fill_random_internal( |
| mbedtls_mpi *X, size_t n_bytes, |
| int (*f_rng)(void *, unsigned char *, size_t), void *p_rng ) |
| { |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; |
| const size_t limbs = CHARS_TO_LIMBS( n_bytes ); |
| const size_t overhead = ( limbs * ciL ) - n_bytes; |
| |
| if( X->n < limbs ) |
| return( MBEDTLS_ERR_MPI_BAD_INPUT_DATA ); |
| |
| memset( X->p, 0, overhead ); |
| memset( (unsigned char *) X->p + limbs * ciL, 0, ( X->n - limbs ) * ciL ); |
| MBEDTLS_MPI_CHK( f_rng( p_rng, (unsigned char *) X->p + overhead, n_bytes ) ); |
| mpi_bigendian_to_host( X->p, limbs ); |
| |
| cleanup: |
| return( ret ); |
| } |
| |
| /* |
| * Fill X with size bytes of random. |
| * |
| * Use a temporary bytes representation to make sure the result is the same |
| * regardless of the platform endianness (useful when f_rng is actually |
| * deterministic, eg for tests). |
| */ |
| int mbedtls_mpi_fill_random( mbedtls_mpi *X, size_t size, |
| int (*f_rng)(void *, unsigned char *, size_t), |
| void *p_rng ) |
| { |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; |
| size_t const limbs = CHARS_TO_LIMBS( size ); |
| |
| MPI_VALIDATE_RET( X != NULL ); |
| MPI_VALIDATE_RET( f_rng != NULL ); |
| |
| /* Ensure that target MPI has exactly the necessary number of limbs */ |
| MBEDTLS_MPI_CHK( mbedtls_mpi_resize_clear( X, limbs ) ); |
| if( size == 0 ) |
| return( 0 ); |
| |
| ret = mpi_fill_random_internal( X, size, f_rng, p_rng ); |
| |
| cleanup: |
| return( ret ); |
| } |
| |
| int mbedtls_mpi_random( mbedtls_mpi *X, |
| mbedtls_mpi_sint min, |
| const mbedtls_mpi *N, |
| int (*f_rng)(void *, unsigned char *, size_t), |
| void *p_rng ) |
| { |
| int ret = MBEDTLS_ERR_MPI_BAD_INPUT_DATA; |
| int count; |
| unsigned cmp = 0; |
| size_t n_bits = mbedtls_mpi_bitlen( N ); |
| size_t n_bytes = ( n_bits + 7 ) / 8; |
| |
| if( min < 0 ) |
| return( MBEDTLS_ERR_MPI_BAD_INPUT_DATA ); |
| if( mbedtls_mpi_cmp_int( N, min ) <= 0 ) |
| return( MBEDTLS_ERR_MPI_BAD_INPUT_DATA ); |
| |
| /* |
| * When min == 0, each try has at worst a probability 1/2 of failing |
| * (the msb has a probability 1/2 of being 0, and then the result will |
| * be < N), so after 30 tries failure probability is a most 2**(-30). |
| * |
| * When N is just below a power of 2, as is the case when generating |
| * a random scalar on most elliptic curves, 1 try is enough with |
| * overwhelming probability. When N is just above a power of 2, |
| * as when generating a random scalar on secp224k1, each try has |
| * a probability of failing that is almost 1/2. |
| * |
| * The probabilities are almost the same if min is nonzero but negligible |
| * compared to N. This is always the case when N is crypto-sized, but |
| * it's convenient to support small N for testing purposes. When N |
| * is small, use a higher repeat count, otherwise the probability of |
| * failure is macroscopic. |
| */ |
| count = ( n_bytes > 4 ? 30 : 250 ); |
| |
| /* Ensure that target MPI has exactly the same number of limbs |
| * as the upper bound, even if the upper bound has leading zeros. |
| * This is necessary for the mbedtls_mpi_lt_mpi_ct() check. */ |
| MBEDTLS_MPI_CHK( mbedtls_mpi_resize_clear( X, N->n ) ); |
| |
| /* |
| * Match the procedure given in RFC 6979 §3.3 (deterministic ECDSA) |
| * when f_rng is a suitably parametrized instance of HMAC_DRBG: |
| * - use the same byte ordering; |
| * - keep the leftmost n_bits bits of the generated octet string; |
| * - try until result is in the desired range. |
| * This also avoids any bias, which is especially important for ECDSA. |
| */ |
| do |
| { |
| MBEDTLS_MPI_CHK( mpi_fill_random_internal( X, n_bytes, f_rng, p_rng ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_shift_r( X, 8 * n_bytes - n_bits ) ); |
| |
| if( --count == 0 ) |
| { |
| ret = MBEDTLS_ERR_MPI_NOT_ACCEPTABLE; |
| goto cleanup; |
| } |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_lt_mpi_ct( X, N, &cmp ) ); |
| } |
| while( mbedtls_mpi_cmp_int( X, min ) < 0 || cmp != 1 ); |
| |
| cleanup: |
| return( ret ); |
| } |
| |
| /* |
| * Modular inverse: X = A^-1 mod N (HAC 14.61 / 14.64) |
| */ |
| int mbedtls_mpi_inv_mod( mbedtls_mpi *X, const mbedtls_mpi *A, const mbedtls_mpi *N ) |
| { |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; |
| mbedtls_mpi G, TA, TU, U1, U2, TB, TV, V1, V2; |
| MPI_VALIDATE_RET( X != NULL ); |
| MPI_VALIDATE_RET( A != NULL ); |
| MPI_VALIDATE_RET( N != NULL ); |
| |
| if( mbedtls_mpi_cmp_int( N, 1 ) <= 0 ) |
| return( MBEDTLS_ERR_MPI_BAD_INPUT_DATA ); |
| |
| mbedtls_mpi_init( &TA ); mbedtls_mpi_init( &TU ); mbedtls_mpi_init( &U1 ); mbedtls_mpi_init( &U2 ); |
| mbedtls_mpi_init( &G ); mbedtls_mpi_init( &TB ); mbedtls_mpi_init( &TV ); |
| mbedtls_mpi_init( &V1 ); mbedtls_mpi_init( &V2 ); |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_gcd( &G, A, N ) ); |
| |
| if( mbedtls_mpi_cmp_int( &G, 1 ) != 0 ) |
| { |
| ret = MBEDTLS_ERR_MPI_NOT_ACCEPTABLE; |
| goto cleanup; |
| } |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_mod_mpi( &TA, A, N ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_copy( &TU, &TA ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_copy( &TB, N ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_copy( &TV, N ) ); |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_lset( &U1, 1 ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_lset( &U2, 0 ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_lset( &V1, 0 ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_lset( &V2, 1 ) ); |
| |
| do |
| { |
| while( ( TU.p[0] & 1 ) == 0 ) |
| { |
| MBEDTLS_MPI_CHK( mbedtls_mpi_shift_r( &TU, 1 ) ); |
| |
| if( ( U1.p[0] & 1 ) != 0 || ( U2.p[0] & 1 ) != 0 ) |
| { |
| MBEDTLS_MPI_CHK( mbedtls_mpi_add_mpi( &U1, &U1, &TB ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_sub_mpi( &U2, &U2, &TA ) ); |
| } |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_shift_r( &U1, 1 ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_shift_r( &U2, 1 ) ); |
| } |
| |
| while( ( TV.p[0] & 1 ) == 0 ) |
| { |
| MBEDTLS_MPI_CHK( mbedtls_mpi_shift_r( &TV, 1 ) ); |
| |
| if( ( V1.p[0] & 1 ) != 0 || ( V2.p[0] & 1 ) != 0 ) |
| { |
| MBEDTLS_MPI_CHK( mbedtls_mpi_add_mpi( &V1, &V1, &TB ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_sub_mpi( &V2, &V2, &TA ) ); |
| } |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_shift_r( &V1, 1 ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_shift_r( &V2, 1 ) ); |
| } |
| |
| if( mbedtls_mpi_cmp_mpi( &TU, &TV ) >= 0 ) |
| { |
| MBEDTLS_MPI_CHK( mbedtls_mpi_sub_mpi( &TU, &TU, &TV ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_sub_mpi( &U1, &U1, &V1 ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_sub_mpi( &U2, &U2, &V2 ) ); |
| } |
| else |
| { |
| MBEDTLS_MPI_CHK( mbedtls_mpi_sub_mpi( &TV, &TV, &TU ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_sub_mpi( &V1, &V1, &U1 ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_sub_mpi( &V2, &V2, &U2 ) ); |
| } |
| } |
| while( mbedtls_mpi_cmp_int( &TU, 0 ) != 0 ); |
| |
| while( mbedtls_mpi_cmp_int( &V1, 0 ) < 0 ) |
| MBEDTLS_MPI_CHK( mbedtls_mpi_add_mpi( &V1, &V1, N ) ); |
| |
| while( mbedtls_mpi_cmp_mpi( &V1, N ) >= 0 ) |
| MBEDTLS_MPI_CHK( mbedtls_mpi_sub_mpi( &V1, &V1, N ) ); |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_copy( X, &V1 ) ); |
| |
| cleanup: |
| |
| mbedtls_mpi_free( &TA ); mbedtls_mpi_free( &TU ); mbedtls_mpi_free( &U1 ); mbedtls_mpi_free( &U2 ); |
| mbedtls_mpi_free( &G ); mbedtls_mpi_free( &TB ); mbedtls_mpi_free( &TV ); |
| mbedtls_mpi_free( &V1 ); mbedtls_mpi_free( &V2 ); |
| |
| return( ret ); |
| } |
| |
| #if defined(MBEDTLS_GENPRIME) |
| |
| static const int small_prime[] = |
| { |
| 3, 5, 7, 11, 13, 17, 19, 23, |
| 29, 31, 37, 41, 43, 47, 53, 59, |
| 61, 67, 71, 73, 79, 83, 89, 97, |
| 101, 103, 107, 109, 113, 127, 131, 137, |
| 139, 149, 151, 157, 163, 167, 173, 179, |
| 181, 191, 193, 197, 199, 211, 223, 227, |
| 229, 233, 239, 241, 251, 257, 263, 269, |
| 271, 277, 281, 283, 293, 307, 311, 313, |
| 317, 331, 337, 347, 349, 353, 359, 367, |
| 373, 379, 383, 389, 397, 401, 409, 419, |
| 421, 431, 433, 439, 443, 449, 457, 461, |
| 463, 467, 479, 487, 491, 499, 503, 509, |
| 521, 523, 541, 547, 557, 563, 569, 571, |
| 577, 587, 593, 599, 601, 607, 613, 617, |
| 619, 631, 641, 643, 647, 653, 659, 661, |
| 673, 677, 683, 691, 701, 709, 719, 727, |
| 733, 739, 743, 751, 757, 761, 769, 773, |
| 787, 797, 809, 811, 821, 823, 827, 829, |
| 839, 853, 857, 859, 863, 877, 881, 883, |
| 887, 907, 911, 919, 929, 937, 941, 947, |
| 953, 967, 971, 977, 983, 991, 997, -103 |
| }; |
| |
| /* |
| * Small divisors test (X must be positive) |
| * |
| * Return values: |
| * 0: no small factor (possible prime, more tests needed) |
| * 1: certain prime |
| * MBEDTLS_ERR_MPI_NOT_ACCEPTABLE: certain non-prime |
| * other negative: error |
| */ |
| static int mpi_check_small_factors( const mbedtls_mpi *X ) |
| { |
| int ret = 0; |
| size_t i; |
| mbedtls_mpi_uint r; |
| |
| if( ( X->p[0] & 1 ) == 0 ) |
| return( MBEDTLS_ERR_MPI_NOT_ACCEPTABLE ); |
| |
| for( i = 0; small_prime[i] > 0; i++ ) |
| { |
| if( mbedtls_mpi_cmp_int( X, small_prime[i] ) <= 0 ) |
| return( 1 ); |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_mod_int( &r, X, small_prime[i] ) ); |
| |
| if( r == 0 ) |
| return( MBEDTLS_ERR_MPI_NOT_ACCEPTABLE ); |
| } |
| |
| cleanup: |
| return( ret ); |
| } |
| |
| /* |
| * Miller-Rabin pseudo-primality test (HAC 4.24) |
| */ |
| static int mpi_miller_rabin( const mbedtls_mpi *X, size_t rounds, |
| int (*f_rng)(void *, unsigned char *, size_t), |
| void *p_rng ) |
| { |
| int ret, count; |
| size_t i, j, k, s; |
| mbedtls_mpi W, R, T, A, RR; |
| |
| MPI_VALIDATE_RET( X != NULL ); |
| MPI_VALIDATE_RET( f_rng != NULL ); |
| |
| mbedtls_mpi_init( &W ); mbedtls_mpi_init( &R ); |
| mbedtls_mpi_init( &T ); mbedtls_mpi_init( &A ); |
| mbedtls_mpi_init( &RR ); |
| |
| /* |
| * W = |X| - 1 |
| * R = W >> lsb( W ) |
| */ |
| MBEDTLS_MPI_CHK( mbedtls_mpi_sub_int( &W, X, 1 ) ); |
| s = mbedtls_mpi_lsb( &W ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_copy( &R, &W ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_shift_r( &R, s ) ); |
| |
| for( i = 0; i < rounds; i++ ) |
| { |
| /* |
| * pick a random A, 1 < A < |X| - 1 |
| */ |
| count = 0; |
| do { |
| MBEDTLS_MPI_CHK( mbedtls_mpi_fill_random( &A, X->n * ciL, f_rng, p_rng ) ); |
| |
| j = mbedtls_mpi_bitlen( &A ); |
| k = mbedtls_mpi_bitlen( &W ); |
| if (j > k) { |
| A.p[A.n - 1] &= ( (mbedtls_mpi_uint) 1 << ( k - ( A.n - 1 ) * biL - 1 ) ) - 1; |
| } |
| |
| if (count++ > 30) { |
| ret = MBEDTLS_ERR_MPI_NOT_ACCEPTABLE; |
| goto cleanup; |
| } |
| |
| } while ( mbedtls_mpi_cmp_mpi( &A, &W ) >= 0 || |
| mbedtls_mpi_cmp_int( &A, 1 ) <= 0 ); |
| |
| /* |
| * A = A^R mod |X| |
| */ |
| MBEDTLS_MPI_CHK( mbedtls_mpi_exp_mod( &A, &A, &R, X, &RR ) ); |
| |
| if( mbedtls_mpi_cmp_mpi( &A, &W ) == 0 || |
| mbedtls_mpi_cmp_int( &A, 1 ) == 0 ) |
| continue; |
| |
| j = 1; |
| while( j < s && mbedtls_mpi_cmp_mpi( &A, &W ) != 0 ) |
| { |
| /* |
| * A = A * A mod |X| |
| */ |
| MBEDTLS_MPI_CHK( mbedtls_mpi_mul_mpi( &T, &A, &A ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_mod_mpi( &A, &T, X ) ); |
| |
| if( mbedtls_mpi_cmp_int( &A, 1 ) == 0 ) |
| break; |
| |
| j++; |
| } |
| |
| /* |
| * not prime if A != |X| - 1 or A == 1 |
| */ |
| if( mbedtls_mpi_cmp_mpi( &A, &W ) != 0 || |
| mbedtls_mpi_cmp_int( &A, 1 ) == 0 ) |
| { |
| ret = MBEDTLS_ERR_MPI_NOT_ACCEPTABLE; |
| break; |
| } |
| } |
| |
| cleanup: |
| mbedtls_mpi_free( &W ); mbedtls_mpi_free( &R ); |
| mbedtls_mpi_free( &T ); mbedtls_mpi_free( &A ); |
| mbedtls_mpi_free( &RR ); |
| |
| return( ret ); |
| } |
| |
| /* |
| * Pseudo-primality test: small factors, then Miller-Rabin |
| */ |
| int mbedtls_mpi_is_prime_ext( const mbedtls_mpi *X, int rounds, |
| int (*f_rng)(void *, unsigned char *, size_t), |
| void *p_rng ) |
| { |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; |
| mbedtls_mpi XX; |
| MPI_VALIDATE_RET( X != NULL ); |
| MPI_VALIDATE_RET( f_rng != NULL ); |
| |
| XX.s = 1; |
| XX.n = X->n; |
| XX.p = X->p; |
| |
| if( mbedtls_mpi_cmp_int( &XX, 0 ) == 0 || |
| mbedtls_mpi_cmp_int( &XX, 1 ) == 0 ) |
| return( MBEDTLS_ERR_MPI_NOT_ACCEPTABLE ); |
| |
| if( mbedtls_mpi_cmp_int( &XX, 2 ) == 0 ) |
| return( 0 ); |
| |
| if( ( ret = mpi_check_small_factors( &XX ) ) != 0 ) |
| { |
| if( ret == 1 ) |
| return( 0 ); |
| |
| return( ret ); |
| } |
| |
| return( mpi_miller_rabin( &XX, rounds, f_rng, p_rng ) ); |
| } |
| |
| /* |
| * Prime number generation |
| * |
| * To generate an RSA key in a way recommended by FIPS 186-4, both primes must |
| * be either 1024 bits or 1536 bits long, and flags must contain |
| * MBEDTLS_MPI_GEN_PRIME_FLAG_LOW_ERR. |
| */ |
| int mbedtls_mpi_gen_prime( mbedtls_mpi *X, size_t nbits, int flags, |
| int (*f_rng)(void *, unsigned char *, size_t), |
| void *p_rng ) |
| { |
| #ifdef MBEDTLS_HAVE_INT64 |
| // ceil(2^63.5) |
| #define CEIL_MAXUINT_DIV_SQRT2 0xb504f333f9de6485ULL |
| #else |
| // ceil(2^31.5) |
| #define CEIL_MAXUINT_DIV_SQRT2 0xb504f334U |
| #endif |
| int ret = MBEDTLS_ERR_MPI_NOT_ACCEPTABLE; |
| size_t k, n; |
| int rounds; |
| mbedtls_mpi_uint r; |
| mbedtls_mpi Y; |
| |
| MPI_VALIDATE_RET( X != NULL ); |
| MPI_VALIDATE_RET( f_rng != NULL ); |
| |
| if( nbits < 3 || nbits > MBEDTLS_MPI_MAX_BITS ) |
| return( MBEDTLS_ERR_MPI_BAD_INPUT_DATA ); |
| |
| mbedtls_mpi_init( &Y ); |
| |
| n = BITS_TO_LIMBS( nbits ); |
| |
| if( ( flags & MBEDTLS_MPI_GEN_PRIME_FLAG_LOW_ERR ) == 0 ) |
| { |
| /* |
| * 2^-80 error probability, number of rounds chosen per HAC, table 4.4 |
| */ |
| rounds = ( ( nbits >= 1300 ) ? 2 : ( nbits >= 850 ) ? 3 : |
| ( nbits >= 650 ) ? 4 : ( nbits >= 350 ) ? 8 : |
| ( nbits >= 250 ) ? 12 : ( nbits >= 150 ) ? 18 : 27 ); |
| } |
| else |
| { |
| /* |
| * 2^-100 error probability, number of rounds computed based on HAC, |
| * fact 4.48 |
| */ |
| rounds = ( ( nbits >= 1450 ) ? 4 : ( nbits >= 1150 ) ? 5 : |
| ( nbits >= 1000 ) ? 6 : ( nbits >= 850 ) ? 7 : |
| ( nbits >= 750 ) ? 8 : ( nbits >= 500 ) ? 13 : |
| ( nbits >= 250 ) ? 28 : ( nbits >= 150 ) ? 40 : 51 ); |
| } |
| |
| while( 1 ) |
| { |
| MBEDTLS_MPI_CHK( mbedtls_mpi_fill_random( X, n * ciL, f_rng, p_rng ) ); |
| /* make sure generated number is at least (nbits-1)+0.5 bits (FIPS 186-4 §B.3.3 steps 4.4, 5.5) */ |
| if( X->p[n-1] < CEIL_MAXUINT_DIV_SQRT2 ) continue; |
| |
| k = n * biL; |
| if( k > nbits ) MBEDTLS_MPI_CHK( mbedtls_mpi_shift_r( X, k - nbits ) ); |
| X->p[0] |= 1; |
| |
| if( ( flags & MBEDTLS_MPI_GEN_PRIME_FLAG_DH ) == 0 ) |
| { |
| ret = mbedtls_mpi_is_prime_ext( X, rounds, f_rng, p_rng ); |
| |
| if( ret != MBEDTLS_ERR_MPI_NOT_ACCEPTABLE ) |
| goto cleanup; |
| } |
| else |
| { |
| /* |
| * An necessary condition for Y and X = 2Y + 1 to be prime |
| * is X = 2 mod 3 (which is equivalent to Y = 2 mod 3). |
| * Make sure it is satisfied, while keeping X = 3 mod 4 |
| */ |
| |
| X->p[0] |= 2; |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_mod_int( &r, X, 3 ) ); |
| if( r == 0 ) |
| MBEDTLS_MPI_CHK( mbedtls_mpi_add_int( X, X, 8 ) ); |
| else if( r == 1 ) |
| MBEDTLS_MPI_CHK( mbedtls_mpi_add_int( X, X, 4 ) ); |
| |
| /* Set Y = (X-1) / 2, which is X / 2 because X is odd */ |
| MBEDTLS_MPI_CHK( mbedtls_mpi_copy( &Y, X ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_shift_r( &Y, 1 ) ); |
| |
| while( 1 ) |
| { |
| /* |
| * First, check small factors for X and Y |
| * before doing Miller-Rabin on any of them |
| */ |
| if( ( ret = mpi_check_small_factors( X ) ) == 0 && |
| ( ret = mpi_check_small_factors( &Y ) ) == 0 && |
| ( ret = mpi_miller_rabin( X, rounds, f_rng, p_rng ) ) |
| == 0 && |
| ( ret = mpi_miller_rabin( &Y, rounds, f_rng, p_rng ) ) |
| == 0 ) |
| goto cleanup; |
| |
| if( ret != MBEDTLS_ERR_MPI_NOT_ACCEPTABLE ) |
| goto cleanup; |
| |
| /* |
| * Next candidates. We want to preserve Y = (X-1) / 2 and |
| * Y = 1 mod 2 and Y = 2 mod 3 (eq X = 3 mod 4 and X = 2 mod 3) |
| * so up Y by 6 and X by 12. |
| */ |
| MBEDTLS_MPI_CHK( mbedtls_mpi_add_int( X, X, 12 ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_add_int( &Y, &Y, 6 ) ); |
| } |
| } |
| } |
| |
| cleanup: |
| |
| mbedtls_mpi_free( &Y ); |
| |
| return( ret ); |
| } |
| |
| #endif /* MBEDTLS_GENPRIME */ |
| |
| #if defined(MBEDTLS_SELF_TEST) |
| |
| #define GCD_PAIR_COUNT 3 |
| |
| static const int gcd_pairs[GCD_PAIR_COUNT][3] = |
| { |
| { 693, 609, 21 }, |
| { 1764, 868, 28 }, |
| { 768454923, 542167814, 1 } |
| }; |
| |
| /* |
| * Checkup routine |
| */ |
| int mbedtls_mpi_self_test( int verbose ) |
| { |
| int ret, i; |
| mbedtls_mpi A, E, N, X, Y, U, V; |
| |
| mbedtls_mpi_init( &A ); mbedtls_mpi_init( &E ); mbedtls_mpi_init( &N ); mbedtls_mpi_init( &X ); |
| mbedtls_mpi_init( &Y ); mbedtls_mpi_init( &U ); mbedtls_mpi_init( &V ); |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_read_string( &A, 16, |
| "EFE021C2645FD1DC586E69184AF4A31E" \ |
| "D5F53E93B5F123FA41680867BA110131" \ |
| "944FE7952E2517337780CB0DB80E61AA" \ |
| "E7C8DDC6C5C6AADEB34EB38A2F40D5E6" ) ); |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_read_string( &E, 16, |
| "B2E7EFD37075B9F03FF989C7C5051C20" \ |
| "34D2A323810251127E7BF8625A4F49A5" \ |
| "F3E27F4DA8BD59C47D6DAABA4C8127BD" \ |
| "5B5C25763222FEFCCFC38B832366C29E" ) ); |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_read_string( &N, 16, |
| "0066A198186C18C10B2F5ED9B522752A" \ |
| "9830B69916E535C8F047518A889A43A5" \ |
| "94B6BED27A168D31D4A52F88925AA8F5" ) ); |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_mul_mpi( &X, &A, &N ) ); |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_read_string( &U, 16, |
| "602AB7ECA597A3D6B56FF9829A5E8B85" \ |
| "9E857EA95A03512E2BAE7391688D264A" \ |
| "A5663B0341DB9CCFD2C4C5F421FEC814" \ |
| "8001B72E848A38CAE1C65F78E56ABDEF" \ |
| "E12D3C039B8A02D6BE593F0BBBDA56F1" \ |
| "ECF677152EF804370C1A305CAF3B5BF1" \ |
| "30879B56C61DE584A0F53A2447A51E" ) ); |
| |
| if( verbose != 0 ) |
| mbedtls_printf( " MPI test #1 (mul_mpi): " ); |
| |
| if( mbedtls_mpi_cmp_mpi( &X, &U ) != 0 ) |
| { |
| if( verbose != 0 ) |
| mbedtls_printf( "failed\n" ); |
| |
| ret = 1; |
| goto cleanup; |
| } |
| |
| if( verbose != 0 ) |
| mbedtls_printf( "passed\n" ); |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_div_mpi( &X, &Y, &A, &N ) ); |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_read_string( &U, 16, |
| "256567336059E52CAE22925474705F39A94" ) ); |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_read_string( &V, 16, |
| "6613F26162223DF488E9CD48CC132C7A" \ |
| "0AC93C701B001B092E4E5B9F73BCD27B" \ |
| "9EE50D0657C77F374E903CDFA4C642" ) ); |
| |
| if( verbose != 0 ) |
| mbedtls_printf( " MPI test #2 (div_mpi): " ); |
| |
| if( mbedtls_mpi_cmp_mpi( &X, &U ) != 0 || |
| mbedtls_mpi_cmp_mpi( &Y, &V ) != 0 ) |
| { |
| if( verbose != 0 ) |
| mbedtls_printf( "failed\n" ); |
| |
| ret = 1; |
| goto cleanup; |
| } |
| |
| if( verbose != 0 ) |
| mbedtls_printf( "passed\n" ); |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_exp_mod( &X, &A, &E, &N, NULL ) ); |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_read_string( &U, 16, |
| "36E139AEA55215609D2816998ED020BB" \ |
| "BD96C37890F65171D948E9BC7CBAA4D9" \ |
| "325D24D6A3C12710F10A09FA08AB87" ) ); |
| |
| if( verbose != 0 ) |
| mbedtls_printf( " MPI test #3 (exp_mod): " ); |
| |
| if( mbedtls_mpi_cmp_mpi( &X, &U ) != 0 ) |
| { |
| if( verbose != 0 ) |
| mbedtls_printf( "failed\n" ); |
| |
| ret = 1; |
| goto cleanup; |
| } |
| |
| if( verbose != 0 ) |
| mbedtls_printf( "passed\n" ); |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_inv_mod( &X, &A, &N ) ); |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_read_string( &U, 16, |
| "003A0AAEDD7E784FC07D8F9EC6E3BFD5" \ |
| "C3DBA76456363A10869622EAC2DD84EC" \ |
| "C5B8A74DAC4D09E03B5E0BE779F2DF61" ) ); |
| |
| if( verbose != 0 ) |
| mbedtls_printf( " MPI test #4 (inv_mod): " ); |
| |
| if( mbedtls_mpi_cmp_mpi( &X, &U ) != 0 ) |
| { |
| if( verbose != 0 ) |
| mbedtls_printf( "failed\n" ); |
| |
| ret = 1; |
| goto cleanup; |
| } |
| |
| if( verbose != 0 ) |
| mbedtls_printf( "passed\n" ); |
| |
| if( verbose != 0 ) |
| mbedtls_printf( " MPI test #5 (simple gcd): " ); |
| |
| for( i = 0; i < GCD_PAIR_COUNT; i++ ) |
| { |
| MBEDTLS_MPI_CHK( mbedtls_mpi_lset( &X, gcd_pairs[i][0] ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_lset( &Y, gcd_pairs[i][1] ) ); |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_gcd( &A, &X, &Y ) ); |
| |
| if( mbedtls_mpi_cmp_int( &A, gcd_pairs[i][2] ) != 0 ) |
| { |
| if( verbose != 0 ) |
| mbedtls_printf( "failed at %d\n", i ); |
| |
| ret = 1; |
| goto cleanup; |
| } |
| } |
| |
| if( verbose != 0 ) |
| mbedtls_printf( "passed\n" ); |
| |
| cleanup: |
| |
| if( ret != 0 && verbose != 0 ) |
| mbedtls_printf( "Unexpected error, return code = %08X\n", (unsigned int) ret ); |
| |
| mbedtls_mpi_free( &A ); mbedtls_mpi_free( &E ); mbedtls_mpi_free( &N ); mbedtls_mpi_free( &X ); |
| mbedtls_mpi_free( &Y ); mbedtls_mpi_free( &U ); mbedtls_mpi_free( &V ); |
| |
| if( verbose != 0 ) |
| mbedtls_printf( "\n" ); |
| |
| return( ret ); |
| } |
| |
| #endif /* MBEDTLS_SELF_TEST */ |
| |
| #endif /* MBEDTLS_BIGNUM_C */ |