| /** |
| * \file helpers.h |
| * |
| * \brief This file contains the prototypes of helper functions for the |
| * purpose of testing. |
| */ |
| |
| /* |
| * Copyright The Mbed TLS Contributors |
| * SPDX-License-Identifier: Apache-2.0 |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); you may |
| * not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #ifndef TEST_HELPERS_H |
| #define TEST_HELPERS_H |
| |
| #if !defined(MBEDTLS_CONFIG_FILE) |
| #include "mbedtls/config.h" |
| #else |
| #include MBEDTLS_CONFIG_FILE |
| #endif |
| |
| #if defined(MBEDTLS_PLATFORM_C) |
| #include "mbedtls/platform.h" |
| #else |
| #include <stdio.h> |
| #define mbedtls_fprintf fprintf |
| #define mbedtls_snprintf snprintf |
| #define mbedtls_calloc calloc |
| #define mbedtls_free free |
| #define mbedtls_exit exit |
| #define mbedtls_time time |
| #define mbedtls_time_t time_t |
| #define MBEDTLS_EXIT_SUCCESS EXIT_SUCCESS |
| #define MBEDTLS_EXIT_FAILURE EXIT_FAILURE |
| #endif |
| |
| #include <stddef.h> |
| #include <stdint.h> |
| |
| int mbedtls_test_platform_setup( void ); |
| void mbedtls_test_platform_teardown( void ); |
| |
| /** |
| * \brief This function decodes the hexadecimal representation of |
| * data. |
| * |
| * \note The output buffer can be the same as the input buffer. For |
| * any other overlapping of the input and output buffers, the |
| * behavior is undefined. |
| * |
| * \param obuf Output buffer. |
| * \param obufmax Size in number of bytes of \p obuf. |
| * \param ibuf Input buffer. |
| * \param len The number of unsigned char written in \p obuf. This must |
| * not be \c NULL. |
| * |
| * \return \c 0 on success. |
| * \return \c -1 if the output buffer is too small or the input string |
| * is not a valid hexadecimal representation. |
| */ |
| int mbedtls_test_unhexify( unsigned char *obuf, size_t obufmax, |
| const char *ibuf, size_t *len ); |
| |
| void mbedtls_test_hexify( unsigned char *obuf, |
| const unsigned char *ibuf, |
| int len ); |
| |
| /** |
| * Allocate and zeroize a buffer. |
| * |
| * If the size if zero, a pointer to a zeroized 1-byte buffer is returned. |
| * |
| * For convenience, dies if allocation fails. |
| */ |
| unsigned char *mbedtls_test_zero_alloc( size_t len ); |
| |
| /** |
| * Allocate and fill a buffer from hex data. |
| * |
| * The buffer is sized exactly as needed. This allows to detect buffer |
| * overruns (including overreads) when running the test suite under valgrind. |
| * |
| * If the size if zero, a pointer to a zeroized 1-byte buffer is returned. |
| * |
| * For convenience, dies if allocation fails. |
| */ |
| unsigned char *mbedtls_test_unhexify_alloc( const char *ibuf, size_t *olen ); |
| |
| int mbedtls_test_hexcmp( uint8_t * a, uint8_t * b, |
| uint32_t a_len, uint32_t b_len ); |
| |
| #if defined(MBEDTLS_CHECK_PARAMS) |
| |
| typedef struct |
| { |
| const char *failure_condition; |
| const char *file; |
| int line; |
| } |
| mbedtls_test_param_failed_location_record_t; |
| |
| /** |
| * \brief Get the location record of the last call to |
| * mbedtls_test_param_failed(). |
| * |
| * \note The call expectation is set up and active until the next call to |
| * mbedtls_test_param_failed_check_expected_call() or |
| * mbedtls_param_failed() that cancels it. |
| */ |
| void mbedtls_test_param_failed_get_location_record( |
| mbedtls_test_param_failed_location_record_t *location_record ); |
| |
| /** |
| * \brief State that a call to mbedtls_param_failed() is expected. |
| * |
| * \note The call expectation is set up and active until the next call to |
| * mbedtls_test_param_failed_check_expected_call() or |
| * mbedtls_param_failed that cancel it. |
| */ |
| void mbedtls_test_param_failed_expect_call( void ); |
| |
| /** |
| * \brief Check whether mbedtls_param_failed() has been called as expected. |
| * |
| * \note Check whether mbedtls_param_failed() has been called between the |
| * last call to mbedtls_test_param_failed_expect_call() and the call |
| * to this function. |
| * |
| * \return \c 0 Since the last call to mbedtls_param_failed_expect_call(), |
| * mbedtls_param_failed() has been called. |
| * \c -1 Otherwise. |
| */ |
| int mbedtls_test_param_failed_check_expected_call( void ); |
| |
| /** |
| * \brief Get the address of the object of type jmp_buf holding the execution |
| * state information used by mbedtls_param_failed() to do a long jump. |
| * |
| * \note If a call to mbedtls_param_failed() is not expected in the sense |
| * that there is no call to mbedtls_test_param_failed_expect_call() |
| * preceding it, then mbedtls_param_failed() will try to restore the |
| * execution to the state stored in the jmp_buf object whose address |
| * is returned by the present function. |
| * |
| * \note This function is intended to provide the parameter of the |
| * setjmp() function to set-up where mbedtls_param_failed() should |
| * long-jump if it has to. It is foreseen to be used as: |
| * |
| * setjmp( mbedtls_test_param_failed_get_state_buf() ). |
| * |
| * \note The type of the returned value is not jmp_buf as jmp_buf is an |
| * an array type (C specification) and a function cannot return an |
| * array type. |
| * |
| * \note The type of the returned value is not jmp_buf* as then the return |
| * value couldn't be used by setjmp(), as its parameter's type is |
| * jmp_buf. |
| * |
| * \return Address of the object of type jmp_buf holding the execution state |
| * information used by mbedtls_param_failed() to do a long jump. |
| */ |
| void* mbedtls_test_param_failed_get_state_buf( void ); |
| |
| /** |
| * \brief Reset the execution state used by mbedtls_param_failed() to do a |
| * long jump. |
| * |
| * \note If a call to mbedtls_param_failed() is not expected in the sense |
| * that there is no call to mbedtls_test_param_failed_expect_call() |
| * preceding it, then mbedtls_param_failed() will try to restore the |
| * execution state that this function reset. |
| * |
| * \note It is recommended to reset the execution state when the state |
| * is not relevant anymore. That way an unexpected call to |
| * mbedtls_param_failed() will not trigger a long jump with |
| * undefined behavior but rather a long jump that will rather fault. |
| */ |
| void mbedtls_test_param_failed_reset_state( void ); |
| #endif /* MBEDTLS_CHECK_PARAMS */ |
| |
| #endif /* TEST_HELPERS_H */ |