| /* |
| * PSA crypto layer on top of Mbed TLS crypto |
| */ |
| /* |
| * Copyright The Mbed TLS Contributors |
| * SPDX-License-Identifier: Apache-2.0 |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); you may |
| * not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "common.h" |
| |
| #if defined(MBEDTLS_PSA_CRYPTO_C) |
| |
| #if defined(MBEDTLS_PSA_CRYPTO_CONFIG) |
| #include "check_crypto_config.h" |
| #endif |
| |
| #include "psa_crypto_service_integration.h" |
| #include "psa/crypto.h" |
| |
| #include "psa_crypto_core.h" |
| #include "psa_crypto_invasive.h" |
| #include "psa_crypto_driver_wrappers.h" |
| #if defined(MBEDTLS_PSA_CRYPTO_SE_C) |
| #include "psa_crypto_se.h" |
| #endif |
| #include "psa_crypto_slot_management.h" |
| /* Include internal declarations that are useful for implementing persistently |
| * stored keys. */ |
| #include "psa_crypto_storage.h" |
| |
| #include <assert.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include "mbedtls/platform.h" |
| #if !defined(MBEDTLS_PLATFORM_C) |
| #define mbedtls_calloc calloc |
| #define mbedtls_free free |
| #endif |
| |
| #include "mbedtls/arc4.h" |
| #include "mbedtls/asn1.h" |
| #include "mbedtls/asn1write.h" |
| #include "mbedtls/bignum.h" |
| #include "mbedtls/blowfish.h" |
| #include "mbedtls/camellia.h" |
| #include "mbedtls/chacha20.h" |
| #include "mbedtls/chachapoly.h" |
| #include "mbedtls/cipher.h" |
| #include "mbedtls/ccm.h" |
| #include "mbedtls/cmac.h" |
| #include "mbedtls/ctr_drbg.h" |
| #include "mbedtls/des.h" |
| #include "mbedtls/ecdh.h" |
| #include "mbedtls/ecp.h" |
| #include "mbedtls/entropy.h" |
| #include "mbedtls/error.h" |
| #include "mbedtls/gcm.h" |
| #include "mbedtls/md2.h" |
| #include "mbedtls/md4.h" |
| #include "mbedtls/md5.h" |
| #include "mbedtls/md.h" |
| #include "mbedtls/md_internal.h" |
| #include "mbedtls/pk.h" |
| #include "mbedtls/pk_internal.h" |
| #include "mbedtls/platform_util.h" |
| #include "mbedtls/error.h" |
| #include "mbedtls/ripemd160.h" |
| #include "mbedtls/rsa.h" |
| #include "mbedtls/sha1.h" |
| #include "mbedtls/sha256.h" |
| #include "mbedtls/sha512.h" |
| #include "mbedtls/xtea.h" |
| |
| #define ARRAY_LENGTH( array ) ( sizeof( array ) / sizeof( *( array ) ) ) |
| |
| /* constant-time buffer comparison */ |
| static inline int safer_memcmp( const uint8_t *a, const uint8_t *b, size_t n ) |
| { |
| size_t i; |
| unsigned char diff = 0; |
| |
| for( i = 0; i < n; i++ ) |
| diff |= a[i] ^ b[i]; |
| |
| return( diff ); |
| } |
| |
| |
| |
| /****************************************************************/ |
| /* Global data, support functions and library management */ |
| /****************************************************************/ |
| |
| static int key_type_is_raw_bytes( psa_key_type_t type ) |
| { |
| return( PSA_KEY_TYPE_IS_UNSTRUCTURED( type ) ); |
| } |
| |
| /* Values for psa_global_data_t::rng_state */ |
| #define RNG_NOT_INITIALIZED 0 |
| #define RNG_INITIALIZED 1 |
| #define RNG_SEEDED 2 |
| |
| typedef struct |
| { |
| void (* entropy_init )( mbedtls_entropy_context *ctx ); |
| void (* entropy_free )( mbedtls_entropy_context *ctx ); |
| mbedtls_entropy_context entropy; |
| mbedtls_ctr_drbg_context ctr_drbg; |
| unsigned initialized : 1; |
| unsigned rng_state : 2; |
| } psa_global_data_t; |
| |
| static psa_global_data_t global_data; |
| |
| #define GUARD_MODULE_INITIALIZED \ |
| if( global_data.initialized == 0 ) \ |
| return( PSA_ERROR_BAD_STATE ); |
| |
| psa_status_t mbedtls_to_psa_error( int ret ) |
| { |
| /* If there's both a high-level code and low-level code, dispatch on |
| * the high-level code. */ |
| switch( ret < -0x7f ? - ( -ret & 0x7f80 ) : ret ) |
| { |
| case 0: |
| return( PSA_SUCCESS ); |
| |
| case MBEDTLS_ERR_AES_INVALID_KEY_LENGTH: |
| case MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH: |
| case MBEDTLS_ERR_AES_FEATURE_UNAVAILABLE: |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| case MBEDTLS_ERR_AES_HW_ACCEL_FAILED: |
| return( PSA_ERROR_HARDWARE_FAILURE ); |
| |
| case MBEDTLS_ERR_ARC4_HW_ACCEL_FAILED: |
| return( PSA_ERROR_HARDWARE_FAILURE ); |
| |
| case MBEDTLS_ERR_ASN1_OUT_OF_DATA: |
| case MBEDTLS_ERR_ASN1_UNEXPECTED_TAG: |
| case MBEDTLS_ERR_ASN1_INVALID_LENGTH: |
| case MBEDTLS_ERR_ASN1_LENGTH_MISMATCH: |
| case MBEDTLS_ERR_ASN1_INVALID_DATA: |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| case MBEDTLS_ERR_ASN1_ALLOC_FAILED: |
| return( PSA_ERROR_INSUFFICIENT_MEMORY ); |
| case MBEDTLS_ERR_ASN1_BUF_TOO_SMALL: |
| return( PSA_ERROR_BUFFER_TOO_SMALL ); |
| |
| #if defined(MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA) |
| case MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA: |
| #elif defined(MBEDTLS_ERR_BLOWFISH_INVALID_KEY_LENGTH) |
| case MBEDTLS_ERR_BLOWFISH_INVALID_KEY_LENGTH: |
| #endif |
| case MBEDTLS_ERR_BLOWFISH_INVALID_INPUT_LENGTH: |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| case MBEDTLS_ERR_BLOWFISH_HW_ACCEL_FAILED: |
| return( PSA_ERROR_HARDWARE_FAILURE ); |
| |
| #if defined(MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA) |
| case MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA: |
| #elif defined(MBEDTLS_ERR_CAMELLIA_INVALID_KEY_LENGTH) |
| case MBEDTLS_ERR_CAMELLIA_INVALID_KEY_LENGTH: |
| #endif |
| case MBEDTLS_ERR_CAMELLIA_INVALID_INPUT_LENGTH: |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| case MBEDTLS_ERR_CAMELLIA_HW_ACCEL_FAILED: |
| return( PSA_ERROR_HARDWARE_FAILURE ); |
| |
| case MBEDTLS_ERR_CCM_BAD_INPUT: |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| case MBEDTLS_ERR_CCM_AUTH_FAILED: |
| return( PSA_ERROR_INVALID_SIGNATURE ); |
| case MBEDTLS_ERR_CCM_HW_ACCEL_FAILED: |
| return( PSA_ERROR_HARDWARE_FAILURE ); |
| |
| case MBEDTLS_ERR_CHACHA20_BAD_INPUT_DATA: |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| |
| case MBEDTLS_ERR_CHACHAPOLY_BAD_STATE: |
| return( PSA_ERROR_BAD_STATE ); |
| case MBEDTLS_ERR_CHACHAPOLY_AUTH_FAILED: |
| return( PSA_ERROR_INVALID_SIGNATURE ); |
| |
| case MBEDTLS_ERR_CIPHER_FEATURE_UNAVAILABLE: |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| case MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA: |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| case MBEDTLS_ERR_CIPHER_ALLOC_FAILED: |
| return( PSA_ERROR_INSUFFICIENT_MEMORY ); |
| case MBEDTLS_ERR_CIPHER_INVALID_PADDING: |
| return( PSA_ERROR_INVALID_PADDING ); |
| case MBEDTLS_ERR_CIPHER_FULL_BLOCK_EXPECTED: |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| case MBEDTLS_ERR_CIPHER_AUTH_FAILED: |
| return( PSA_ERROR_INVALID_SIGNATURE ); |
| case MBEDTLS_ERR_CIPHER_INVALID_CONTEXT: |
| return( PSA_ERROR_CORRUPTION_DETECTED ); |
| case MBEDTLS_ERR_CIPHER_HW_ACCEL_FAILED: |
| return( PSA_ERROR_HARDWARE_FAILURE ); |
| |
| case MBEDTLS_ERR_CMAC_HW_ACCEL_FAILED: |
| return( PSA_ERROR_HARDWARE_FAILURE ); |
| |
| case MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED: |
| return( PSA_ERROR_INSUFFICIENT_ENTROPY ); |
| case MBEDTLS_ERR_CTR_DRBG_REQUEST_TOO_BIG: |
| case MBEDTLS_ERR_CTR_DRBG_INPUT_TOO_BIG: |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| case MBEDTLS_ERR_CTR_DRBG_FILE_IO_ERROR: |
| return( PSA_ERROR_INSUFFICIENT_ENTROPY ); |
| |
| case MBEDTLS_ERR_DES_INVALID_INPUT_LENGTH: |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| case MBEDTLS_ERR_DES_HW_ACCEL_FAILED: |
| return( PSA_ERROR_HARDWARE_FAILURE ); |
| |
| case MBEDTLS_ERR_ENTROPY_NO_SOURCES_DEFINED: |
| case MBEDTLS_ERR_ENTROPY_NO_STRONG_SOURCE: |
| case MBEDTLS_ERR_ENTROPY_SOURCE_FAILED: |
| return( PSA_ERROR_INSUFFICIENT_ENTROPY ); |
| |
| case MBEDTLS_ERR_GCM_AUTH_FAILED: |
| return( PSA_ERROR_INVALID_SIGNATURE ); |
| case MBEDTLS_ERR_GCM_BAD_INPUT: |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| case MBEDTLS_ERR_GCM_HW_ACCEL_FAILED: |
| return( PSA_ERROR_HARDWARE_FAILURE ); |
| |
| case MBEDTLS_ERR_MD2_HW_ACCEL_FAILED: |
| case MBEDTLS_ERR_MD4_HW_ACCEL_FAILED: |
| case MBEDTLS_ERR_MD5_HW_ACCEL_FAILED: |
| return( PSA_ERROR_HARDWARE_FAILURE ); |
| |
| case MBEDTLS_ERR_MD_FEATURE_UNAVAILABLE: |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| case MBEDTLS_ERR_MD_BAD_INPUT_DATA: |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| case MBEDTLS_ERR_MD_ALLOC_FAILED: |
| return( PSA_ERROR_INSUFFICIENT_MEMORY ); |
| case MBEDTLS_ERR_MD_FILE_IO_ERROR: |
| return( PSA_ERROR_STORAGE_FAILURE ); |
| case MBEDTLS_ERR_MD_HW_ACCEL_FAILED: |
| return( PSA_ERROR_HARDWARE_FAILURE ); |
| |
| case MBEDTLS_ERR_MPI_FILE_IO_ERROR: |
| return( PSA_ERROR_STORAGE_FAILURE ); |
| case MBEDTLS_ERR_MPI_BAD_INPUT_DATA: |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| case MBEDTLS_ERR_MPI_INVALID_CHARACTER: |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| case MBEDTLS_ERR_MPI_BUFFER_TOO_SMALL: |
| return( PSA_ERROR_BUFFER_TOO_SMALL ); |
| case MBEDTLS_ERR_MPI_NEGATIVE_VALUE: |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| case MBEDTLS_ERR_MPI_DIVISION_BY_ZERO: |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| case MBEDTLS_ERR_MPI_NOT_ACCEPTABLE: |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| case MBEDTLS_ERR_MPI_ALLOC_FAILED: |
| return( PSA_ERROR_INSUFFICIENT_MEMORY ); |
| |
| case MBEDTLS_ERR_PK_ALLOC_FAILED: |
| return( PSA_ERROR_INSUFFICIENT_MEMORY ); |
| case MBEDTLS_ERR_PK_TYPE_MISMATCH: |
| case MBEDTLS_ERR_PK_BAD_INPUT_DATA: |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| case MBEDTLS_ERR_PK_FILE_IO_ERROR: |
| return( PSA_ERROR_STORAGE_FAILURE ); |
| case MBEDTLS_ERR_PK_KEY_INVALID_VERSION: |
| case MBEDTLS_ERR_PK_KEY_INVALID_FORMAT: |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| case MBEDTLS_ERR_PK_UNKNOWN_PK_ALG: |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| case MBEDTLS_ERR_PK_PASSWORD_REQUIRED: |
| case MBEDTLS_ERR_PK_PASSWORD_MISMATCH: |
| return( PSA_ERROR_NOT_PERMITTED ); |
| case MBEDTLS_ERR_PK_INVALID_PUBKEY: |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| case MBEDTLS_ERR_PK_INVALID_ALG: |
| case MBEDTLS_ERR_PK_UNKNOWN_NAMED_CURVE: |
| case MBEDTLS_ERR_PK_FEATURE_UNAVAILABLE: |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| case MBEDTLS_ERR_PK_SIG_LEN_MISMATCH: |
| return( PSA_ERROR_INVALID_SIGNATURE ); |
| case MBEDTLS_ERR_PK_HW_ACCEL_FAILED: |
| return( PSA_ERROR_HARDWARE_FAILURE ); |
| |
| case MBEDTLS_ERR_PLATFORM_HW_ACCEL_FAILED: |
| return( PSA_ERROR_HARDWARE_FAILURE ); |
| case MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED: |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| |
| case MBEDTLS_ERR_RIPEMD160_HW_ACCEL_FAILED: |
| return( PSA_ERROR_HARDWARE_FAILURE ); |
| |
| case MBEDTLS_ERR_RSA_BAD_INPUT_DATA: |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| case MBEDTLS_ERR_RSA_INVALID_PADDING: |
| return( PSA_ERROR_INVALID_PADDING ); |
| case MBEDTLS_ERR_RSA_KEY_GEN_FAILED: |
| return( PSA_ERROR_HARDWARE_FAILURE ); |
| case MBEDTLS_ERR_RSA_KEY_CHECK_FAILED: |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| case MBEDTLS_ERR_RSA_PUBLIC_FAILED: |
| case MBEDTLS_ERR_RSA_PRIVATE_FAILED: |
| return( PSA_ERROR_CORRUPTION_DETECTED ); |
| case MBEDTLS_ERR_RSA_VERIFY_FAILED: |
| return( PSA_ERROR_INVALID_SIGNATURE ); |
| case MBEDTLS_ERR_RSA_OUTPUT_TOO_LARGE: |
| return( PSA_ERROR_BUFFER_TOO_SMALL ); |
| case MBEDTLS_ERR_RSA_RNG_FAILED: |
| return( PSA_ERROR_INSUFFICIENT_MEMORY ); |
| case MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION: |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| case MBEDTLS_ERR_RSA_HW_ACCEL_FAILED: |
| return( PSA_ERROR_HARDWARE_FAILURE ); |
| |
| case MBEDTLS_ERR_SHA1_HW_ACCEL_FAILED: |
| case MBEDTLS_ERR_SHA256_HW_ACCEL_FAILED: |
| case MBEDTLS_ERR_SHA512_HW_ACCEL_FAILED: |
| return( PSA_ERROR_HARDWARE_FAILURE ); |
| |
| case MBEDTLS_ERR_XTEA_INVALID_INPUT_LENGTH: |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| case MBEDTLS_ERR_XTEA_HW_ACCEL_FAILED: |
| return( PSA_ERROR_HARDWARE_FAILURE ); |
| |
| case MBEDTLS_ERR_ECP_BAD_INPUT_DATA: |
| case MBEDTLS_ERR_ECP_INVALID_KEY: |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| case MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL: |
| return( PSA_ERROR_BUFFER_TOO_SMALL ); |
| case MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE: |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| case MBEDTLS_ERR_ECP_SIG_LEN_MISMATCH: |
| case MBEDTLS_ERR_ECP_VERIFY_FAILED: |
| return( PSA_ERROR_INVALID_SIGNATURE ); |
| case MBEDTLS_ERR_ECP_ALLOC_FAILED: |
| return( PSA_ERROR_INSUFFICIENT_MEMORY ); |
| case MBEDTLS_ERR_ECP_HW_ACCEL_FAILED: |
| return( PSA_ERROR_HARDWARE_FAILURE ); |
| case MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED: |
| return( PSA_ERROR_CORRUPTION_DETECTED ); |
| |
| default: |
| return( PSA_ERROR_GENERIC_ERROR ); |
| } |
| } |
| |
| |
| |
| |
| /****************************************************************/ |
| /* Key management */ |
| /****************************************************************/ |
| |
| #if defined(MBEDTLS_PSA_CRYPTO_SE_C) |
| static inline int psa_key_slot_is_external( const psa_key_slot_t *slot ) |
| { |
| return( psa_key_lifetime_is_external( slot->attr.lifetime ) ); |
| } |
| #endif /* MBEDTLS_PSA_CRYPTO_SE_C */ |
| |
| /* For now the MBEDTLS_PSA_ACCEL_ guards are also used here since the |
| * current test driver in key_management.c is using this function |
| * when accelerators are used for ECC key pair and public key. |
| * Once that dependency is resolved these guards can be removed. |
| */ |
| #if defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_ECC_KEY_PAIR) || \ |
| defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_ECC_PUBLIC_KEY) || \ |
| defined(MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR) || \ |
| defined(MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_PUBLIC_KEY) |
| mbedtls_ecp_group_id mbedtls_ecc_group_of_psa( psa_ecc_family_t curve, |
| size_t byte_length ) |
| { |
| switch( curve ) |
| { |
| case PSA_ECC_FAMILY_SECP_R1: |
| switch( byte_length ) |
| { |
| case PSA_BITS_TO_BYTES( 192 ): |
| return( MBEDTLS_ECP_DP_SECP192R1 ); |
| case PSA_BITS_TO_BYTES( 224 ): |
| return( MBEDTLS_ECP_DP_SECP224R1 ); |
| case PSA_BITS_TO_BYTES( 256 ): |
| return( MBEDTLS_ECP_DP_SECP256R1 ); |
| case PSA_BITS_TO_BYTES( 384 ): |
| return( MBEDTLS_ECP_DP_SECP384R1 ); |
| case PSA_BITS_TO_BYTES( 521 ): |
| return( MBEDTLS_ECP_DP_SECP521R1 ); |
| default: |
| return( MBEDTLS_ECP_DP_NONE ); |
| } |
| break; |
| |
| case PSA_ECC_FAMILY_BRAINPOOL_P_R1: |
| switch( byte_length ) |
| { |
| case PSA_BITS_TO_BYTES( 256 ): |
| return( MBEDTLS_ECP_DP_BP256R1 ); |
| case PSA_BITS_TO_BYTES( 384 ): |
| return( MBEDTLS_ECP_DP_BP384R1 ); |
| case PSA_BITS_TO_BYTES( 512 ): |
| return( MBEDTLS_ECP_DP_BP512R1 ); |
| default: |
| return( MBEDTLS_ECP_DP_NONE ); |
| } |
| break; |
| |
| case PSA_ECC_FAMILY_MONTGOMERY: |
| switch( byte_length ) |
| { |
| case PSA_BITS_TO_BYTES( 255 ): |
| return( MBEDTLS_ECP_DP_CURVE25519 ); |
| case PSA_BITS_TO_BYTES( 448 ): |
| return( MBEDTLS_ECP_DP_CURVE448 ); |
| default: |
| return( MBEDTLS_ECP_DP_NONE ); |
| } |
| break; |
| |
| case PSA_ECC_FAMILY_SECP_K1: |
| switch( byte_length ) |
| { |
| case PSA_BITS_TO_BYTES( 192 ): |
| return( MBEDTLS_ECP_DP_SECP192K1 ); |
| case PSA_BITS_TO_BYTES( 224 ): |
| return( MBEDTLS_ECP_DP_SECP224K1 ); |
| case PSA_BITS_TO_BYTES( 256 ): |
| return( MBEDTLS_ECP_DP_SECP256K1 ); |
| default: |
| return( MBEDTLS_ECP_DP_NONE ); |
| } |
| break; |
| |
| default: |
| return( MBEDTLS_ECP_DP_NONE ); |
| } |
| } |
| #endif /* defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_ECC_KEY_PAIR) || |
| * defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_ECC_PUBLIC_KEY) || |
| * defined(MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR) || |
| * defined(MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_PUBLIC_KEY) */ |
| |
| static psa_status_t validate_unstructured_key_bit_size( psa_key_type_t type, |
| size_t bits ) |
| { |
| /* Check that the bit size is acceptable for the key type */ |
| switch( type ) |
| { |
| case PSA_KEY_TYPE_RAW_DATA: |
| case PSA_KEY_TYPE_HMAC: |
| case PSA_KEY_TYPE_DERIVE: |
| break; |
| #if defined(MBEDTLS_AES_C) |
| case PSA_KEY_TYPE_AES: |
| if( bits != 128 && bits != 192 && bits != 256 ) |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| break; |
| #endif |
| #if defined(MBEDTLS_CAMELLIA_C) |
| case PSA_KEY_TYPE_CAMELLIA: |
| if( bits != 128 && bits != 192 && bits != 256 ) |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| break; |
| #endif |
| #if defined(MBEDTLS_DES_C) |
| case PSA_KEY_TYPE_DES: |
| if( bits != 64 && bits != 128 && bits != 192 ) |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| break; |
| #endif |
| #if defined(MBEDTLS_ARC4_C) |
| case PSA_KEY_TYPE_ARC4: |
| if( bits < 8 || bits > 2048 ) |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| break; |
| #endif |
| #if defined(MBEDTLS_CHACHA20_C) |
| case PSA_KEY_TYPE_CHACHA20: |
| if( bits != 256 ) |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| break; |
| #endif |
| default: |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| } |
| if( bits % 8 != 0 ) |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| |
| return( PSA_SUCCESS ); |
| } |
| |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_PKCS1V15_CRYPT) || \ |
| defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_PKCS1V15_SIGN) || \ |
| defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_OAEP) || \ |
| defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_PSS) || \ |
| defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_KEY_PAIR) || \ |
| defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_PUBLIC_KEY) |
| |
| /* Mbed TLS doesn't support non-byte-aligned key sizes (i.e. key sizes |
| * that are not a multiple of 8) well. For example, there is only |
| * mbedtls_rsa_get_len(), which returns a number of bytes, and no |
| * way to return the exact bit size of a key. |
| * To keep things simple, reject non-byte-aligned key sizes. */ |
| static psa_status_t psa_check_rsa_key_byte_aligned( |
| const mbedtls_rsa_context *rsa ) |
| { |
| mbedtls_mpi n; |
| psa_status_t status; |
| mbedtls_mpi_init( &n ); |
| status = mbedtls_to_psa_error( |
| mbedtls_rsa_export( rsa, &n, NULL, NULL, NULL, NULL ) ); |
| if( status == PSA_SUCCESS ) |
| { |
| if( mbedtls_mpi_bitlen( &n ) % 8 != 0 ) |
| status = PSA_ERROR_NOT_SUPPORTED; |
| } |
| mbedtls_mpi_free( &n ); |
| return( status ); |
| } |
| |
| /** Load the contents of a key buffer into an internal RSA representation |
| * |
| * \param[in] type The type of key contained in \p data. |
| * \param[in] data The buffer from which to load the representation. |
| * \param[in] data_length The size in bytes of \p data. |
| * \param[out] p_rsa Returns a pointer to an RSA context on success. |
| * The caller is responsible for freeing both the |
| * contents of the context and the context itself |
| * when done. |
| */ |
| static psa_status_t psa_load_rsa_representation( psa_key_type_t type, |
| const uint8_t *data, |
| size_t data_length, |
| mbedtls_rsa_context **p_rsa ) |
| { |
| psa_status_t status; |
| mbedtls_pk_context ctx; |
| size_t bits; |
| mbedtls_pk_init( &ctx ); |
| |
| /* Parse the data. */ |
| if( PSA_KEY_TYPE_IS_KEY_PAIR( type ) ) |
| status = mbedtls_to_psa_error( |
| mbedtls_pk_parse_key( &ctx, data, data_length, NULL, 0 ) ); |
| else |
| status = mbedtls_to_psa_error( |
| mbedtls_pk_parse_public_key( &ctx, data, data_length ) ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| |
| /* We have something that the pkparse module recognizes. If it is a |
| * valid RSA key, store it. */ |
| if( mbedtls_pk_get_type( &ctx ) != MBEDTLS_PK_RSA ) |
| { |
| status = PSA_ERROR_INVALID_ARGUMENT; |
| goto exit; |
| } |
| |
| /* The size of an RSA key doesn't have to be a multiple of 8. Mbed TLS |
| * supports non-byte-aligned key sizes, but not well. For example, |
| * mbedtls_rsa_get_len() returns the key size in bytes, not in bits. */ |
| bits = PSA_BYTES_TO_BITS( mbedtls_rsa_get_len( mbedtls_pk_rsa( ctx ) ) ); |
| if( bits > PSA_VENDOR_RSA_MAX_KEY_BITS ) |
| { |
| status = PSA_ERROR_NOT_SUPPORTED; |
| goto exit; |
| } |
| status = psa_check_rsa_key_byte_aligned( mbedtls_pk_rsa( ctx ) ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| |
| /* Copy out the pointer to the RSA context, and reset the PK context |
| * such that pk_free doesn't free the RSA context we just grabbed. */ |
| *p_rsa = mbedtls_pk_rsa( ctx ); |
| ctx.pk_info = NULL; |
| |
| exit: |
| mbedtls_pk_free( &ctx ); |
| return( status ); |
| } |
| |
| #endif /* defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_PKCS1V15_CRYPT) || |
| * defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_PKCS1V15_SIGN) || |
| * defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_OAEP) || |
| * defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_PSS) || |
| * defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_KEY_PAIR) || |
| * defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_PUBLIC_KEY) */ |
| |
| #if defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_KEY_PAIR) || \ |
| defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_PUBLIC_KEY) |
| |
| /** Export an RSA key to export representation |
| * |
| * \param[in] type The type of key (public/private) to export |
| * \param[in] rsa The internal RSA representation from which to export |
| * \param[out] data The buffer to export to |
| * \param[in] data_size The length of the buffer to export to |
| * \param[out] data_length The amount of bytes written to \p data |
| */ |
| static psa_status_t psa_export_rsa_key( psa_key_type_t type, |
| mbedtls_rsa_context *rsa, |
| uint8_t *data, |
| size_t data_size, |
| size_t *data_length ) |
| { |
| #if defined(MBEDTLS_PK_WRITE_C) |
| int ret; |
| mbedtls_pk_context pk; |
| uint8_t *pos = data + data_size; |
| |
| mbedtls_pk_init( &pk ); |
| pk.pk_info = &mbedtls_rsa_info; |
| pk.pk_ctx = rsa; |
| |
| /* PSA Crypto API defines the format of an RSA key as a DER-encoded |
| * representation of the non-encrypted PKCS#1 RSAPrivateKey for a |
| * private key and of the RFC3279 RSAPublicKey for a public key. */ |
| if( PSA_KEY_TYPE_IS_KEY_PAIR( type ) ) |
| ret = mbedtls_pk_write_key_der( &pk, data, data_size ); |
| else |
| ret = mbedtls_pk_write_pubkey( &pos, data, &pk ); |
| |
| if( ret < 0 ) |
| { |
| /* Clean up in case pk_write failed halfway through. */ |
| memset( data, 0, data_size ); |
| return( mbedtls_to_psa_error( ret ) ); |
| } |
| |
| /* The mbedtls_pk_xxx functions write to the end of the buffer. |
| * Move the data to the beginning and erase remaining data |
| * at the original location. */ |
| if( 2 * (size_t) ret <= data_size ) |
| { |
| memcpy( data, data + data_size - ret, ret ); |
| memset( data + data_size - ret, 0, ret ); |
| } |
| else if( (size_t) ret < data_size ) |
| { |
| memmove( data, data + data_size - ret, ret ); |
| memset( data + ret, 0, data_size - ret ); |
| } |
| |
| *data_length = ret; |
| return( PSA_SUCCESS ); |
| #else |
| (void) type; |
| (void) rsa; |
| (void) data; |
| (void) data_size; |
| (void) data_length; |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| #endif /* MBEDTLS_PK_WRITE_C */ |
| } |
| |
| /** Import an RSA key from import representation to a slot |
| * |
| * \param[in,out] slot The slot where to store the export representation to |
| * \param[in] data The buffer containing the import representation |
| * \param[in] data_length The amount of bytes in \p data |
| */ |
| static psa_status_t psa_import_rsa_key( psa_key_slot_t *slot, |
| const uint8_t *data, |
| size_t data_length ) |
| { |
| psa_status_t status; |
| uint8_t* output = NULL; |
| mbedtls_rsa_context *rsa = NULL; |
| |
| /* Parse input */ |
| status = psa_load_rsa_representation( slot->attr.type, |
| data, |
| data_length, |
| &rsa ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| |
| slot->attr.bits = (psa_key_bits_t) PSA_BYTES_TO_BITS( |
| mbedtls_rsa_get_len( rsa ) ); |
| |
| /* Re-export the data to PSA export format, such that we can store export |
| * representation in the key slot. Export representation in case of RSA is |
| * the smallest representation that's allowed as input, so a straight-up |
| * allocation of the same size as the input buffer will be large enough. */ |
| output = mbedtls_calloc( 1, data_length ); |
| if( output == NULL ) |
| { |
| status = PSA_ERROR_INSUFFICIENT_MEMORY; |
| goto exit; |
| } |
| |
| status = psa_export_rsa_key( slot->attr.type, |
| rsa, |
| output, |
| data_length, |
| &data_length); |
| exit: |
| /* Always free the RSA object */ |
| mbedtls_rsa_free( rsa ); |
| mbedtls_free( rsa ); |
| |
| /* Free the allocated buffer only on error. */ |
| if( status != PSA_SUCCESS ) |
| { |
| mbedtls_free( output ); |
| return( status ); |
| } |
| |
| /* On success, store the allocated export-formatted key. */ |
| slot->data.key.data = output; |
| slot->data.key.bytes = data_length; |
| |
| return( PSA_SUCCESS ); |
| } |
| |
| #endif /* defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_KEY_PAIR) || |
| * defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_PUBLIC_KEY) */ |
| |
| #if defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_ECC_KEY_PAIR) || \ |
| defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_ECC_PUBLIC_KEY) || \ |
| defined(MBEDTLS_PSA_BUILTIN_ALG_ECDSA) || \ |
| defined(MBEDTLS_PSA_BUILTIN_ALG_ECDH) || \ |
| defined(MBEDTLS_PSA_BUILTIN_ALG_DETERMINISTIC_ECDSA) |
| /** Load the contents of a key buffer into an internal ECP representation |
| * |
| * \param[in] type The type of key contained in \p data. |
| * \param[in] data The buffer from which to load the representation. |
| * \param[in] data_length The size in bytes of \p data. |
| * \param[out] p_ecp Returns a pointer to an ECP context on success. |
| * The caller is responsible for freeing both the |
| * contents of the context and the context itself |
| * when done. |
| */ |
| static psa_status_t psa_load_ecp_representation( psa_key_type_t type, |
| const uint8_t *data, |
| size_t data_length, |
| mbedtls_ecp_keypair **p_ecp ) |
| { |
| mbedtls_ecp_group_id grp_id = MBEDTLS_ECP_DP_NONE; |
| psa_status_t status; |
| mbedtls_ecp_keypair *ecp = NULL; |
| size_t curve_size = data_length; |
| |
| if( PSA_KEY_TYPE_IS_PUBLIC_KEY( type ) && |
| PSA_KEY_TYPE_ECC_GET_FAMILY( type ) != PSA_ECC_FAMILY_MONTGOMERY ) |
| { |
| /* A Weierstrass public key is represented as: |
| * - The byte 0x04; |
| * - `x_P` as a `ceiling(m/8)`-byte string, big-endian; |
| * - `y_P` as a `ceiling(m/8)`-byte string, big-endian. |
| * So its data length is 2m+1 where m is the curve size in bits. |
| */ |
| if( ( data_length & 1 ) == 0 ) |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| curve_size = data_length / 2; |
| |
| /* Montgomery public keys are represented in compressed format, meaning |
| * their curve_size is equal to the amount of input. */ |
| |
| /* Private keys are represented in uncompressed private random integer |
| * format, meaning their curve_size is equal to the amount of input. */ |
| } |
| |
| /* Allocate and initialize a key representation. */ |
| ecp = mbedtls_calloc( 1, sizeof( mbedtls_ecp_keypair ) ); |
| if( ecp == NULL ) |
| return( PSA_ERROR_INSUFFICIENT_MEMORY ); |
| mbedtls_ecp_keypair_init( ecp ); |
| |
| /* Load the group. */ |
| grp_id = mbedtls_ecc_group_of_psa( PSA_KEY_TYPE_ECC_GET_FAMILY( type ), |
| curve_size ); |
| if( grp_id == MBEDTLS_ECP_DP_NONE ) |
| { |
| status = PSA_ERROR_INVALID_ARGUMENT; |
| goto exit; |
| } |
| |
| status = mbedtls_to_psa_error( |
| mbedtls_ecp_group_load( &ecp->grp, grp_id ) ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| |
| /* Load the key material. */ |
| if( PSA_KEY_TYPE_IS_PUBLIC_KEY( type ) ) |
| { |
| /* Load the public value. */ |
| status = mbedtls_to_psa_error( |
| mbedtls_ecp_point_read_binary( &ecp->grp, &ecp->Q, |
| data, |
| data_length ) ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| |
| /* Check that the point is on the curve. */ |
| status = mbedtls_to_psa_error( |
| mbedtls_ecp_check_pubkey( &ecp->grp, &ecp->Q ) ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| } |
| else |
| { |
| /* Load and validate the secret value. */ |
| status = mbedtls_to_psa_error( |
| mbedtls_ecp_read_key( ecp->grp.id, |
| ecp, |
| data, |
| data_length ) ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| } |
| |
| *p_ecp = ecp; |
| exit: |
| if( status != PSA_SUCCESS ) |
| { |
| mbedtls_ecp_keypair_free( ecp ); |
| mbedtls_free( ecp ); |
| } |
| |
| return( status ); |
| } |
| #endif /* defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_ECC_KEY_PAIR) || |
| * defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_ECC_PUBLIC_KEY) || |
| * defined(MBEDTLS_PSA_BUILTIN_ALG_ECDSA) || |
| * defined(MBEDTLS_PSA_BUILTIN_ALG_ECDH) || |
| * defined(MBEDTLS_PSA_BUILTIN_ALG_DETERMINISTIC_ECDSA) */ |
| |
| #if defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_ECC_KEY_PAIR) || \ |
| defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_ECC_PUBLIC_KEY) |
| /** Export an ECP key to export representation |
| * |
| * \param[in] type The type of key (public/private) to export |
| * \param[in] ecp The internal ECP representation from which to export |
| * \param[out] data The buffer to export to |
| * \param[in] data_size The length of the buffer to export to |
| * \param[out] data_length The amount of bytes written to \p data |
| */ |
| static psa_status_t psa_export_ecp_key( psa_key_type_t type, |
| mbedtls_ecp_keypair *ecp, |
| uint8_t *data, |
| size_t data_size, |
| size_t *data_length ) |
| { |
| psa_status_t status; |
| |
| if( PSA_KEY_TYPE_IS_PUBLIC_KEY( type ) ) |
| { |
| /* Check whether the public part is loaded */ |
| if( mbedtls_ecp_is_zero( &ecp->Q ) ) |
| { |
| /* Calculate the public key */ |
| status = mbedtls_to_psa_error( |
| mbedtls_ecp_mul( &ecp->grp, &ecp->Q, &ecp->d, &ecp->grp.G, |
| mbedtls_ctr_drbg_random, &global_data.ctr_drbg ) ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| } |
| |
| status = mbedtls_to_psa_error( |
| mbedtls_ecp_point_write_binary( &ecp->grp, &ecp->Q, |
| MBEDTLS_ECP_PF_UNCOMPRESSED, |
| data_length, |
| data, |
| data_size ) ); |
| if( status != PSA_SUCCESS ) |
| memset( data, 0, data_size ); |
| |
| return( status ); |
| } |
| else |
| { |
| if( data_size < PSA_BITS_TO_BYTES( ecp->grp.nbits ) ) |
| return( PSA_ERROR_BUFFER_TOO_SMALL ); |
| |
| status = mbedtls_to_psa_error( |
| mbedtls_ecp_write_key( ecp, |
| data, |
| PSA_BITS_TO_BYTES( ecp->grp.nbits ) ) ); |
| if( status == PSA_SUCCESS ) |
| *data_length = PSA_BITS_TO_BYTES( ecp->grp.nbits ); |
| else |
| memset( data, 0, data_size ); |
| |
| return( status ); |
| } |
| } |
| |
| /** Import an ECP key from import representation to a slot |
| * |
| * \param[in,out] slot The slot where to store the export representation to |
| * \param[in] data The buffer containing the import representation |
| * \param[in] data_length The amount of bytes in \p data |
| */ |
| static psa_status_t psa_import_ecp_key( psa_key_slot_t *slot, |
| const uint8_t *data, |
| size_t data_length ) |
| { |
| psa_status_t status; |
| uint8_t* output = NULL; |
| mbedtls_ecp_keypair *ecp = NULL; |
| |
| /* Parse input */ |
| status = psa_load_ecp_representation( slot->attr.type, |
| data, |
| data_length, |
| &ecp ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| |
| if( PSA_KEY_TYPE_ECC_GET_FAMILY( slot->attr.type ) == PSA_ECC_FAMILY_MONTGOMERY) |
| slot->attr.bits = (psa_key_bits_t) ecp->grp.nbits + 1; |
| else |
| slot->attr.bits = (psa_key_bits_t) ecp->grp.nbits; |
| |
| /* Re-export the data to PSA export format. There is currently no support |
| * for other input formats then the export format, so this is a 1-1 |
| * copy operation. */ |
| output = mbedtls_calloc( 1, data_length ); |
| if( output == NULL ) |
| { |
| status = PSA_ERROR_INSUFFICIENT_MEMORY; |
| goto exit; |
| } |
| |
| status = psa_export_ecp_key( slot->attr.type, |
| ecp, |
| output, |
| data_length, |
| &data_length); |
| exit: |
| /* Always free the PK object (will also free contained ECP context) */ |
| mbedtls_ecp_keypair_free( ecp ); |
| mbedtls_free( ecp ); |
| |
| /* Free the allocated buffer only on error. */ |
| if( status != PSA_SUCCESS ) |
| { |
| mbedtls_free( output ); |
| return( status ); |
| } |
| |
| /* On success, store the allocated export-formatted key. */ |
| slot->data.key.data = output; |
| slot->data.key.bytes = data_length; |
| |
| return( PSA_SUCCESS ); |
| } |
| #endif /* defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_ECC_KEY_PAIR) || |
| * defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_ECC_PUBLIC_KEY) */ |
| |
| /** Return the size of the key in the given slot, in bits. |
| * |
| * \param[in] slot A key slot. |
| * |
| * \return The key size in bits, read from the metadata in the slot. |
| */ |
| static inline size_t psa_get_key_slot_bits( const psa_key_slot_t *slot ) |
| { |
| return( slot->attr.bits ); |
| } |
| |
| /** Try to allocate a buffer to an empty key slot. |
| * |
| * \param[in,out] slot Key slot to attach buffer to. |
| * \param[in] buffer_length Requested size of the buffer. |
| * |
| * \retval #PSA_SUCCESS |
| * The buffer has been successfully allocated. |
| * \retval #PSA_ERROR_INSUFFICIENT_MEMORY |
| * Not enough memory was available for allocation. |
| * \retval #PSA_ERROR_ALREADY_EXISTS |
| * Trying to allocate a buffer to a non-empty key slot. |
| */ |
| static psa_status_t psa_allocate_buffer_to_slot( psa_key_slot_t *slot, |
| size_t buffer_length ) |
| { |
| if( slot->data.key.data != NULL ) |
| return( PSA_ERROR_ALREADY_EXISTS ); |
| |
| slot->data.key.data = mbedtls_calloc( 1, buffer_length ); |
| if( slot->data.key.data == NULL ) |
| return( PSA_ERROR_INSUFFICIENT_MEMORY ); |
| |
| slot->data.key.bytes = buffer_length; |
| return( PSA_SUCCESS ); |
| } |
| |
| psa_status_t psa_copy_key_material_into_slot( psa_key_slot_t *slot, |
| const uint8_t* data, |
| size_t data_length ) |
| { |
| psa_status_t status = psa_allocate_buffer_to_slot( slot, |
| data_length ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| |
| memcpy( slot->data.key.data, data, data_length ); |
| return( PSA_SUCCESS ); |
| } |
| |
| /** Import key data into a slot. |
| * |
| * `slot->type` must have been set previously. |
| * This function assumes that the slot does not contain any key material yet. |
| * On failure, the slot content is unchanged. |
| * |
| * Persistent storage is not affected. |
| * |
| * \param[in,out] slot The key slot to import data into. |
| * Its `type` field must have previously been set to |
| * the desired key type. |
| * It must not contain any key material yet. |
| * \param[in] data Buffer containing the key material to parse and import. |
| * \param data_length Size of \p data in bytes. |
| * |
| * \retval #PSA_SUCCESS |
| * \retval #PSA_ERROR_INVALID_ARGUMENT |
| * \retval #PSA_ERROR_NOT_SUPPORTED |
| * \retval #PSA_ERROR_INSUFFICIENT_MEMORY |
| */ |
| static psa_status_t psa_import_key_into_slot( psa_key_slot_t *slot, |
| const uint8_t *data, |
| size_t data_length ) |
| { |
| psa_status_t status = PSA_SUCCESS; |
| size_t bit_size; |
| |
| /* zero-length keys are never supported. */ |
| if( data_length == 0 ) |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| |
| if( key_type_is_raw_bytes( slot->attr.type ) ) |
| { |
| bit_size = PSA_BYTES_TO_BITS( data_length ); |
| |
| /* Ensure that the bytes-to-bits conversion hasn't overflown. */ |
| if( data_length > SIZE_MAX / 8 ) |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| |
| /* Enforce a size limit, and in particular ensure that the bit |
| * size fits in its representation type. */ |
| if( bit_size > PSA_MAX_KEY_BITS ) |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| |
| status = validate_unstructured_key_bit_size( slot->attr.type, bit_size ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| |
| /* Allocate memory for the key */ |
| status = psa_copy_key_material_into_slot( slot, data, data_length ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| |
| /* Write the actual key size to the slot. |
| * psa_start_key_creation() wrote the size declared by the |
| * caller, which may be 0 (meaning unspecified) or wrong. */ |
| slot->attr.bits = (psa_key_bits_t) bit_size; |
| |
| return( PSA_SUCCESS ); |
| } |
| else if( PSA_KEY_TYPE_IS_ASYMMETRIC( slot->attr.type ) ) |
| { |
| /* Try validation through accelerators first. */ |
| bit_size = slot->attr.bits; |
| psa_key_attributes_t attributes = { |
| .core = slot->attr |
| }; |
| status = psa_driver_wrapper_validate_key( &attributes, |
| data, |
| data_length, |
| &bit_size ); |
| if( status == PSA_SUCCESS ) |
| { |
| /* Key has been validated successfully by an accelerator. |
| * Copy key material into slot. */ |
| status = psa_copy_key_material_into_slot( slot, data, data_length ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| |
| slot->attr.bits = (psa_key_bits_t) bit_size; |
| return( PSA_SUCCESS ); |
| } |
| else if( status != PSA_ERROR_NOT_SUPPORTED ) |
| return( status ); |
| |
| /* Key format is not supported by any accelerator, try software fallback |
| * if present. */ |
| #if defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_ECC_KEY_PAIR) || \ |
| defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_ECC_PUBLIC_KEY) |
| if( PSA_KEY_TYPE_IS_ECC( slot->attr.type ) ) |
| { |
| return( psa_import_ecp_key( slot, data, data_length ) ); |
| } |
| #endif /* defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_ECC_KEY_PAIR) || |
| * defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_ECC_PUBLIC_KEY) */ |
| #if defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_KEY_PAIR) || \ |
| defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_PUBLIC_KEY) |
| if( PSA_KEY_TYPE_IS_RSA( slot->attr.type ) ) |
| { |
| return( psa_import_rsa_key( slot, data, data_length ) ); |
| } |
| #endif /* defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_KEY_PAIR) || |
| * defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_PUBLIC_KEY) */ |
| |
| /* Fell through the fallback as well, so have nothing else to try. */ |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| } |
| else |
| { |
| /* Unknown key type */ |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| } |
| } |
| |
| /** Calculate the intersection of two algorithm usage policies. |
| * |
| * Return 0 (which allows no operation) on incompatibility. |
| */ |
| static psa_algorithm_t psa_key_policy_algorithm_intersection( |
| psa_algorithm_t alg1, |
| psa_algorithm_t alg2 ) |
| { |
| /* Common case: both sides actually specify the same policy. */ |
| if( alg1 == alg2 ) |
| return( alg1 ); |
| /* If the policies are from the same hash-and-sign family, check |
| * if one is a wildcard. If so the other has the specific algorithm. */ |
| if( PSA_ALG_IS_HASH_AND_SIGN( alg1 ) && |
| PSA_ALG_IS_HASH_AND_SIGN( alg2 ) && |
| ( alg1 & ~PSA_ALG_HASH_MASK ) == ( alg2 & ~PSA_ALG_HASH_MASK ) ) |
| { |
| if( PSA_ALG_SIGN_GET_HASH( alg1 ) == PSA_ALG_ANY_HASH ) |
| return( alg2 ); |
| if( PSA_ALG_SIGN_GET_HASH( alg2 ) == PSA_ALG_ANY_HASH ) |
| return( alg1 ); |
| } |
| /* If the policies are incompatible, allow nothing. */ |
| return( 0 ); |
| } |
| |
| static int psa_key_algorithm_permits( psa_algorithm_t policy_alg, |
| psa_algorithm_t requested_alg ) |
| { |
| /* Common case: the policy only allows requested_alg. */ |
| if( requested_alg == policy_alg ) |
| return( 1 ); |
| /* If policy_alg is a hash-and-sign with a wildcard for the hash, |
| * and requested_alg is the same hash-and-sign family with any hash, |
| * then requested_alg is compliant with policy_alg. */ |
| if( PSA_ALG_IS_HASH_AND_SIGN( requested_alg ) && |
| PSA_ALG_SIGN_GET_HASH( policy_alg ) == PSA_ALG_ANY_HASH ) |
| { |
| return( ( policy_alg & ~PSA_ALG_HASH_MASK ) == |
| ( requested_alg & ~PSA_ALG_HASH_MASK ) ); |
| } |
| /* If policy_alg is a generic key agreement operation, then using it for |
| * a key derivation with that key agreement should also be allowed. This |
| * behaviour is expected to be defined in a future specification version. */ |
| if( PSA_ALG_IS_RAW_KEY_AGREEMENT( policy_alg ) && |
| PSA_ALG_IS_KEY_AGREEMENT( requested_alg ) ) |
| { |
| return( PSA_ALG_KEY_AGREEMENT_GET_BASE( requested_alg ) == |
| policy_alg ); |
| } |
| /* If it isn't permitted, it's forbidden. */ |
| return( 0 ); |
| } |
| |
| /** Test whether a policy permits an algorithm. |
| * |
| * The caller must test usage flags separately. |
| */ |
| static int psa_key_policy_permits( const psa_key_policy_t *policy, |
| psa_algorithm_t alg ) |
| { |
| return( psa_key_algorithm_permits( policy->alg, alg ) || |
| psa_key_algorithm_permits( policy->alg2, alg ) ); |
| } |
| |
| /** Restrict a key policy based on a constraint. |
| * |
| * \param[in,out] policy The policy to restrict. |
| * \param[in] constraint The policy constraint to apply. |
| * |
| * \retval #PSA_SUCCESS |
| * \c *policy contains the intersection of the original value of |
| * \c *policy and \c *constraint. |
| * \retval #PSA_ERROR_INVALID_ARGUMENT |
| * \c *policy and \c *constraint are incompatible. |
| * \c *policy is unchanged. |
| */ |
| static psa_status_t psa_restrict_key_policy( |
| psa_key_policy_t *policy, |
| const psa_key_policy_t *constraint ) |
| { |
| psa_algorithm_t intersection_alg = |
| psa_key_policy_algorithm_intersection( policy->alg, constraint->alg ); |
| psa_algorithm_t intersection_alg2 = |
| psa_key_policy_algorithm_intersection( policy->alg2, constraint->alg2 ); |
| if( intersection_alg == 0 && policy->alg != 0 && constraint->alg != 0 ) |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| if( intersection_alg2 == 0 && policy->alg2 != 0 && constraint->alg2 != 0 ) |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| policy->usage &= constraint->usage; |
| policy->alg = intersection_alg; |
| policy->alg2 = intersection_alg2; |
| return( PSA_SUCCESS ); |
| } |
| |
| /** Get the description of a key given its identifier and policy constraints |
| * and lock it. |
| * |
| * The key must have allow all the usage flags set in \p usage. If \p alg is |
| * nonzero, the key must allow operations with this algorithm. |
| * |
| * In case of a persistent key, the function loads the description of the key |
| * into a key slot if not already done. |
| * |
| * On success, the returned key slot is locked. It is the responsibility of |
| * the caller to unlock the key slot when it does not access it anymore. |
| */ |
| static psa_status_t psa_get_and_lock_key_slot_with_policy( |
| mbedtls_svc_key_id_t key, |
| psa_key_slot_t **p_slot, |
| psa_key_usage_t usage, |
| psa_algorithm_t alg ) |
| { |
| psa_status_t status = PSA_ERROR_CORRUPTION_DETECTED; |
| psa_key_slot_t *slot; |
| |
| status = psa_get_and_lock_key_slot( key, p_slot ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| slot = *p_slot; |
| |
| /* Enforce that usage policy for the key slot contains all the flags |
| * required by the usage parameter. There is one exception: public |
| * keys can always be exported, so we treat public key objects as |
| * if they had the export flag. */ |
| if( PSA_KEY_TYPE_IS_PUBLIC_KEY( slot->attr.type ) ) |
| usage &= ~PSA_KEY_USAGE_EXPORT; |
| |
| status = PSA_ERROR_NOT_PERMITTED; |
| if( ( slot->attr.policy.usage & usage ) != usage ) |
| goto error; |
| |
| /* Enforce that the usage policy permits the requested algortihm. */ |
| if( alg != 0 && ! psa_key_policy_permits( &slot->attr.policy, alg ) ) |
| goto error; |
| |
| return( PSA_SUCCESS ); |
| |
| error: |
| *p_slot = NULL; |
| psa_unlock_key_slot( slot ); |
| |
| return( status ); |
| } |
| |
| /** Get a key slot containing a transparent key and lock it. |
| * |
| * A transparent key is a key for which the key material is directly |
| * available, as opposed to a key in a secure element. |
| * |
| * This is a temporary function to use instead of |
| * psa_get_and_lock_key_slot_with_policy() until secure element support is |
| * fully implemented. |
| * |
| * On success, the returned key slot is locked. It is the responsibility of the |
| * caller to unlock the key slot when it does not access it anymore. |
| */ |
| #if defined(MBEDTLS_PSA_CRYPTO_SE_C) |
| static psa_status_t psa_get_and_lock_transparent_key_slot_with_policy( |
| mbedtls_svc_key_id_t key, |
| psa_key_slot_t **p_slot, |
| psa_key_usage_t usage, |
| psa_algorithm_t alg ) |
| { |
| psa_status_t status = psa_get_and_lock_key_slot_with_policy( key, p_slot, |
| usage, alg ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| |
| if( psa_key_slot_is_external( *p_slot ) ) |
| { |
| psa_unlock_key_slot( *p_slot ); |
| *p_slot = NULL; |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| } |
| |
| return( PSA_SUCCESS ); |
| } |
| #else /* MBEDTLS_PSA_CRYPTO_SE_C */ |
| /* With no secure element support, all keys are transparent. */ |
| #define psa_get_and_lock_transparent_key_slot_with_policy( key, p_slot, usage, alg ) \ |
| psa_get_and_lock_key_slot_with_policy( key, p_slot, usage, alg ) |
| #endif /* MBEDTLS_PSA_CRYPTO_SE_C */ |
| |
| /** Wipe key data from a slot. Preserve metadata such as the policy. */ |
| static psa_status_t psa_remove_key_data_from_memory( psa_key_slot_t *slot ) |
| { |
| #if defined(MBEDTLS_PSA_CRYPTO_SE_C) |
| if( psa_key_slot_is_external( slot ) ) |
| { |
| /* No key material to clean. */ |
| } |
| else |
| #endif /* MBEDTLS_PSA_CRYPTO_SE_C */ |
| { |
| /* Data pointer will always be either a valid pointer or NULL in an |
| * initialized slot, so we can just free it. */ |
| if( slot->data.key.data != NULL ) |
| mbedtls_platform_zeroize( slot->data.key.data, slot->data.key.bytes); |
| mbedtls_free( slot->data.key.data ); |
| slot->data.key.data = NULL; |
| slot->data.key.bytes = 0; |
| } |
| |
| return( PSA_SUCCESS ); |
| } |
| |
| /** Completely wipe a slot in memory, including its policy. |
| * Persistent storage is not affected. */ |
| psa_status_t psa_wipe_key_slot( psa_key_slot_t *slot ) |
| { |
| psa_status_t status = psa_remove_key_data_from_memory( slot ); |
| |
| /* |
| * As the return error code may not be handled in case of multiple errors, |
| * do our best to report an unexpected lock counter: if available |
| * call MBEDTLS_PARAM_FAILED that may terminate execution (if called as |
| * part of the execution of a test suite this will stop the test suite |
| * execution). |
| */ |
| if( slot->lock_count != 1 ) |
| { |
| #ifdef MBEDTLS_CHECK_PARAMS |
| MBEDTLS_PARAM_FAILED( slot->lock_count == 1 ); |
| #endif |
| status = PSA_ERROR_CORRUPTION_DETECTED; |
| } |
| |
| /* Multipart operations may still be using the key. This is safe |
| * because all multipart operation objects are independent from |
| * the key slot: if they need to access the key after the setup |
| * phase, they have a copy of the key. Note that this means that |
| * key material can linger until all operations are completed. */ |
| /* At this point, key material and other type-specific content has |
| * been wiped. Clear remaining metadata. We can call memset and not |
| * zeroize because the metadata is not particularly sensitive. */ |
| memset( slot, 0, sizeof( *slot ) ); |
| return( status ); |
| } |
| |
| psa_status_t psa_destroy_key( mbedtls_svc_key_id_t key ) |
| { |
| psa_key_slot_t *slot; |
| psa_status_t status; /* status of the last operation */ |
| psa_status_t overall_status = PSA_SUCCESS; |
| #if defined(MBEDTLS_PSA_CRYPTO_SE_C) |
| psa_se_drv_table_entry_t *driver; |
| #endif /* MBEDTLS_PSA_CRYPTO_SE_C */ |
| |
| if( mbedtls_svc_key_id_is_null( key ) ) |
| return( PSA_SUCCESS ); |
| |
| /* |
| * Get the description of the key in a key slot. In case of a persistent |
| * key, this will load the key description from persistent memory if not |
| * done yet. We cannot avoid this loading as without it we don't know if |
| * the key is operated by an SE or not and this information is needed by |
| * the current implementation. |
| */ |
| status = psa_get_and_lock_key_slot( key, &slot ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| |
| /* |
| * If the key slot containing the key description is under access by the |
| * library (apart from the present access), the key cannot be destroyed |
| * yet. For the time being, just return in error. Eventually (to be |
| * implemented), the key should be destroyed when all accesses have |
| * stopped. |
| */ |
| if( slot->lock_count > 1 ) |
| { |
| psa_unlock_key_slot( slot ); |
| return( PSA_ERROR_GENERIC_ERROR ); |
| } |
| |
| #if defined(MBEDTLS_PSA_CRYPTO_SE_C) |
| driver = psa_get_se_driver_entry( slot->attr.lifetime ); |
| if( driver != NULL ) |
| { |
| /* For a key in a secure element, we need to do three things: |
| * remove the key file in internal storage, destroy the |
| * key inside the secure element, and update the driver's |
| * persistent data. Start a transaction that will encompass these |
| * three actions. */ |
| psa_crypto_prepare_transaction( PSA_CRYPTO_TRANSACTION_DESTROY_KEY ); |
| psa_crypto_transaction.key.lifetime = slot->attr.lifetime; |
| psa_crypto_transaction.key.slot = slot->data.se.slot_number; |
| psa_crypto_transaction.key.id = slot->attr.id; |
| status = psa_crypto_save_transaction( ); |
| if( status != PSA_SUCCESS ) |
| { |
| (void) psa_crypto_stop_transaction( ); |
| /* We should still try to destroy the key in the secure |
| * element and the key metadata in storage. This is especially |
| * important if the error is that the storage is full. |
| * But how to do it exactly without risking an inconsistent |
| * state after a reset? |
| * https://github.com/ARMmbed/mbed-crypto/issues/215 |
| */ |
| overall_status = status; |
| goto exit; |
| } |
| |
| status = psa_destroy_se_key( driver, slot->data.se.slot_number ); |
| if( overall_status == PSA_SUCCESS ) |
| overall_status = status; |
| } |
| #endif /* MBEDTLS_PSA_CRYPTO_SE_C */ |
| |
| #if defined(MBEDTLS_PSA_CRYPTO_STORAGE_C) |
| if( ! PSA_KEY_LIFETIME_IS_VOLATILE( slot->attr.lifetime ) ) |
| { |
| status = psa_destroy_persistent_key( slot->attr.id ); |
| if( overall_status == PSA_SUCCESS ) |
| overall_status = status; |
| |
| /* TODO: other slots may have a copy of the same key. We should |
| * invalidate them. |
| * https://github.com/ARMmbed/mbed-crypto/issues/214 |
| */ |
| } |
| #endif /* defined(MBEDTLS_PSA_CRYPTO_STORAGE_C) */ |
| |
| #if defined(MBEDTLS_PSA_CRYPTO_SE_C) |
| if( driver != NULL ) |
| { |
| status = psa_save_se_persistent_data( driver ); |
| if( overall_status == PSA_SUCCESS ) |
| overall_status = status; |
| status = psa_crypto_stop_transaction( ); |
| if( overall_status == PSA_SUCCESS ) |
| overall_status = status; |
| } |
| #endif /* MBEDTLS_PSA_CRYPTO_SE_C */ |
| |
| #if defined(MBEDTLS_PSA_CRYPTO_SE_C) |
| exit: |
| #endif /* MBEDTLS_PSA_CRYPTO_SE_C */ |
| status = psa_wipe_key_slot( slot ); |
| /* Prioritize CORRUPTION_DETECTED from wiping over a storage error */ |
| if( overall_status == PSA_SUCCESS ) |
| overall_status = status; |
| return( overall_status ); |
| } |
| |
| void psa_reset_key_attributes( psa_key_attributes_t *attributes ) |
| { |
| mbedtls_free( attributes->domain_parameters ); |
| memset( attributes, 0, sizeof( *attributes ) ); |
| } |
| |
| psa_status_t psa_set_key_domain_parameters( psa_key_attributes_t *attributes, |
| psa_key_type_t type, |
| const uint8_t *data, |
| size_t data_length ) |
| { |
| uint8_t *copy = NULL; |
| |
| if( data_length != 0 ) |
| { |
| copy = mbedtls_calloc( 1, data_length ); |
| if( copy == NULL ) |
| return( PSA_ERROR_INSUFFICIENT_MEMORY ); |
| memcpy( copy, data, data_length ); |
| } |
| /* After this point, this function is guaranteed to succeed, so it |
| * can start modifying `*attributes`. */ |
| |
| if( attributes->domain_parameters != NULL ) |
| { |
| mbedtls_free( attributes->domain_parameters ); |
| attributes->domain_parameters = NULL; |
| attributes->domain_parameters_size = 0; |
| } |
| |
| attributes->domain_parameters = copy; |
| attributes->domain_parameters_size = data_length; |
| attributes->core.type = type; |
| return( PSA_SUCCESS ); |
| } |
| |
| psa_status_t psa_get_key_domain_parameters( |
| const psa_key_attributes_t *attributes, |
| uint8_t *data, size_t data_size, size_t *data_length ) |
| { |
| if( attributes->domain_parameters_size > data_size ) |
| return( PSA_ERROR_BUFFER_TOO_SMALL ); |
| *data_length = attributes->domain_parameters_size; |
| if( attributes->domain_parameters_size != 0 ) |
| memcpy( data, attributes->domain_parameters, |
| attributes->domain_parameters_size ); |
| return( PSA_SUCCESS ); |
| } |
| |
| #if defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_KEY_PAIR) || \ |
| defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_PUBLIC_KEY) |
| static psa_status_t psa_get_rsa_public_exponent( |
| const mbedtls_rsa_context *rsa, |
| psa_key_attributes_t *attributes ) |
| { |
| mbedtls_mpi mpi; |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; |
| uint8_t *buffer = NULL; |
| size_t buflen; |
| mbedtls_mpi_init( &mpi ); |
| |
| ret = mbedtls_rsa_export( rsa, NULL, NULL, NULL, NULL, &mpi ); |
| if( ret != 0 ) |
| goto exit; |
| if( mbedtls_mpi_cmp_int( &mpi, 65537 ) == 0 ) |
| { |
| /* It's the default value, which is reported as an empty string, |
| * so there's nothing to do. */ |
| goto exit; |
| } |
| |
| buflen = mbedtls_mpi_size( &mpi ); |
| buffer = mbedtls_calloc( 1, buflen ); |
| if( buffer == NULL ) |
| { |
| ret = MBEDTLS_ERR_MPI_ALLOC_FAILED; |
| goto exit; |
| } |
| ret = mbedtls_mpi_write_binary( &mpi, buffer, buflen ); |
| if( ret != 0 ) |
| goto exit; |
| attributes->domain_parameters = buffer; |
| attributes->domain_parameters_size = buflen; |
| |
| exit: |
| mbedtls_mpi_free( &mpi ); |
| if( ret != 0 ) |
| mbedtls_free( buffer ); |
| return( mbedtls_to_psa_error( ret ) ); |
| } |
| #endif /* defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_KEY_PAIR) || |
| * defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_PUBLIC_KEY) */ |
| |
| /** Retrieve all the publicly-accessible attributes of a key. |
| */ |
| psa_status_t psa_get_key_attributes( mbedtls_svc_key_id_t key, |
| psa_key_attributes_t *attributes ) |
| { |
| psa_status_t status = PSA_ERROR_CORRUPTION_DETECTED; |
| psa_status_t unlock_status = PSA_ERROR_CORRUPTION_DETECTED; |
| psa_key_slot_t *slot; |
| |
| psa_reset_key_attributes( attributes ); |
| |
| status = psa_get_and_lock_key_slot_with_policy( key, &slot, 0, 0 ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| |
| attributes->core = slot->attr; |
| attributes->core.flags &= ( MBEDTLS_PSA_KA_MASK_EXTERNAL_ONLY | |
| MBEDTLS_PSA_KA_MASK_DUAL_USE ); |
| |
| #if defined(MBEDTLS_PSA_CRYPTO_SE_C) |
| if( psa_key_slot_is_external( slot ) ) |
| psa_set_key_slot_number( attributes, slot->data.se.slot_number ); |
| #endif /* MBEDTLS_PSA_CRYPTO_SE_C */ |
| |
| switch( slot->attr.type ) |
| { |
| #if defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_KEY_PAIR) || \ |
| defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_PUBLIC_KEY) |
| case PSA_KEY_TYPE_RSA_KEY_PAIR: |
| case PSA_KEY_TYPE_RSA_PUBLIC_KEY: |
| #if defined(MBEDTLS_PSA_CRYPTO_SE_C) |
| /* TODO: reporting the public exponent for opaque keys |
| * is not yet implemented. |
| * https://github.com/ARMmbed/mbed-crypto/issues/216 |
| */ |
| if( psa_key_slot_is_external( slot ) ) |
| break; |
| #endif /* MBEDTLS_PSA_CRYPTO_SE_C */ |
| { |
| mbedtls_rsa_context *rsa = NULL; |
| |
| status = psa_load_rsa_representation( slot->attr.type, |
| slot->data.key.data, |
| slot->data.key.bytes, |
| &rsa ); |
| if( status != PSA_SUCCESS ) |
| break; |
| |
| status = psa_get_rsa_public_exponent( rsa, |
| attributes ); |
| mbedtls_rsa_free( rsa ); |
| mbedtls_free( rsa ); |
| } |
| break; |
| #endif /* defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_KEY_PAIR) || |
| * defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_PUBLIC_KEY) */ |
| default: |
| /* Nothing else to do. */ |
| break; |
| } |
| |
| if( status != PSA_SUCCESS ) |
| psa_reset_key_attributes( attributes ); |
| |
| unlock_status = psa_unlock_key_slot( slot ); |
| |
| return( ( status == PSA_SUCCESS ) ? unlock_status : status ); |
| } |
| |
| #if defined(MBEDTLS_PSA_CRYPTO_SE_C) |
| psa_status_t psa_get_key_slot_number( |
| const psa_key_attributes_t *attributes, |
| psa_key_slot_number_t *slot_number ) |
| { |
| if( attributes->core.flags & MBEDTLS_PSA_KA_FLAG_HAS_SLOT_NUMBER ) |
| { |
| *slot_number = attributes->slot_number; |
| return( PSA_SUCCESS ); |
| } |
| else |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| } |
| #endif /* MBEDTLS_PSA_CRYPTO_SE_C */ |
| |
| static psa_status_t psa_internal_export_key_buffer( const psa_key_slot_t *slot, |
| uint8_t *data, |
| size_t data_size, |
| size_t *data_length ) |
| { |
| if( slot->data.key.bytes > data_size ) |
| return( PSA_ERROR_BUFFER_TOO_SMALL ); |
| memcpy( data, slot->data.key.data, slot->data.key.bytes ); |
| memset( data + slot->data.key.bytes, 0, |
| data_size - slot->data.key.bytes ); |
| *data_length = slot->data.key.bytes; |
| return( PSA_SUCCESS ); |
| } |
| |
| static psa_status_t psa_internal_export_key( const psa_key_slot_t *slot, |
| uint8_t *data, |
| size_t data_size, |
| size_t *data_length, |
| int export_public_key ) |
| { |
| #if defined(MBEDTLS_PSA_CRYPTO_SE_C) |
| const psa_drv_se_t *drv; |
| psa_drv_se_context_t *drv_context; |
| #endif /* MBEDTLS_PSA_CRYPTO_SE_C */ |
| |
| *data_length = 0; |
| |
| if( export_public_key && ! PSA_KEY_TYPE_IS_ASYMMETRIC( slot->attr.type ) ) |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| |
| /* Reject a zero-length output buffer now, since this can never be a |
| * valid key representation. This way we know that data must be a valid |
| * pointer and we can do things like memset(data, ..., data_size). */ |
| if( data_size == 0 ) |
| return( PSA_ERROR_BUFFER_TOO_SMALL ); |
| |
| #if defined(MBEDTLS_PSA_CRYPTO_SE_C) |
| if( psa_get_se_driver( slot->attr.lifetime, &drv, &drv_context ) ) |
| { |
| psa_drv_se_export_key_t method; |
| if( drv->key_management == NULL ) |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| method = ( export_public_key ? |
| drv->key_management->p_export_public : |
| drv->key_management->p_export ); |
| if( method == NULL ) |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| return( method( drv_context, |
| slot->data.se.slot_number, |
| data, data_size, data_length ) ); |
| } |
| #endif /* MBEDTLS_PSA_CRYPTO_SE_C */ |
| |
| if( key_type_is_raw_bytes( slot->attr.type ) ) |
| { |
| return( psa_internal_export_key_buffer( slot, data, data_size, data_length ) ); |
| } |
| else if( PSA_KEY_TYPE_IS_RSA( slot->attr.type ) || |
| PSA_KEY_TYPE_IS_ECC( slot->attr.type ) ) |
| { |
| if( PSA_KEY_TYPE_IS_PUBLIC_KEY( slot->attr.type ) ) |
| { |
| /* Exporting public -> public */ |
| return( psa_internal_export_key_buffer( slot, data, data_size, data_length ) ); |
| } |
| else if( !export_public_key ) |
| { |
| /* Exporting private -> private */ |
| return( psa_internal_export_key_buffer( slot, data, data_size, data_length ) ); |
| } |
| |
| /* Need to export the public part of a private key, |
| * so conversion is needed. Try the accelerators first. */ |
| psa_status_t status = psa_driver_wrapper_export_public_key( slot, |
| data, |
| data_size, |
| data_length ); |
| |
| if( status != PSA_ERROR_NOT_SUPPORTED || |
| psa_key_lifetime_is_external( slot->attr.lifetime ) ) |
| return( status ); |
| |
| if( PSA_KEY_TYPE_IS_RSA( slot->attr.type ) ) |
| { |
| #if defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_KEY_PAIR) || \ |
| defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_PUBLIC_KEY) |
| mbedtls_rsa_context *rsa = NULL; |
| status = psa_load_rsa_representation( |
| slot->attr.type, |
| slot->data.key.data, |
| slot->data.key.bytes, |
| &rsa ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| |
| status = psa_export_rsa_key( PSA_KEY_TYPE_RSA_PUBLIC_KEY, |
| rsa, |
| data, |
| data_size, |
| data_length ); |
| |
| mbedtls_rsa_free( rsa ); |
| mbedtls_free( rsa ); |
| |
| return( status ); |
| #else |
| /* We don't know how to convert a private RSA key to public. */ |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| #endif /* defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_KEY_PAIR) || |
| * defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_PUBLIC_KEY) */ |
| } |
| else |
| { |
| #if defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_ECC_KEY_PAIR) || \ |
| defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_ECC_PUBLIC_KEY) |
| mbedtls_ecp_keypair *ecp = NULL; |
| status = psa_load_ecp_representation( |
| slot->attr.type, |
| slot->data.key.data, |
| slot->data.key.bytes, |
| &ecp ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| |
| status = psa_export_ecp_key( PSA_KEY_TYPE_ECC_PUBLIC_KEY( |
| PSA_KEY_TYPE_ECC_GET_FAMILY( |
| slot->attr.type ) ), |
| ecp, |
| data, |
| data_size, |
| data_length ); |
| |
| mbedtls_ecp_keypair_free( ecp ); |
| mbedtls_free( ecp ); |
| return( status ); |
| #else |
| /* We don't know how to convert a private ECC key to public */ |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| #endif /* defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_ECC_KEY_PAIR) || |
| * defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_ECC_PUBLIC_KEY) */ |
| } |
| } |
| else |
| { |
| /* This shouldn't happen in the reference implementation, but |
| it is valid for a special-purpose implementation to omit |
| support for exporting certain key types. */ |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| } |
| } |
| |
| psa_status_t psa_export_key( mbedtls_svc_key_id_t key, |
| uint8_t *data, |
| size_t data_size, |
| size_t *data_length ) |
| { |
| psa_status_t status = PSA_ERROR_CORRUPTION_DETECTED; |
| psa_status_t unlock_status = PSA_ERROR_CORRUPTION_DETECTED; |
| psa_key_slot_t *slot; |
| |
| /* Set the key to empty now, so that even when there are errors, we always |
| * set data_length to a value between 0 and data_size. On error, setting |
| * the key to empty is a good choice because an empty key representation is |
| * unlikely to be accepted anywhere. */ |
| *data_length = 0; |
| |
| /* Export requires the EXPORT flag. There is an exception for public keys, |
| * which don't require any flag, but |
| * psa_get_and_lock_key_slot_with_policy() takes care of this. |
| */ |
| status = psa_get_and_lock_key_slot_with_policy( key, &slot, |
| PSA_KEY_USAGE_EXPORT, 0 ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| |
| status = psa_internal_export_key( slot, data, data_size, data_length, 0 ); |
| unlock_status = psa_unlock_key_slot( slot ); |
| |
| return( ( status == PSA_SUCCESS ) ? unlock_status : status ); |
| } |
| |
| psa_status_t psa_export_public_key( mbedtls_svc_key_id_t key, |
| uint8_t *data, |
| size_t data_size, |
| size_t *data_length ) |
| { |
| psa_status_t status = PSA_ERROR_CORRUPTION_DETECTED; |
| psa_status_t unlock_status = PSA_ERROR_CORRUPTION_DETECTED; |
| psa_key_slot_t *slot; |
| |
| /* Set the key to empty now, so that even when there are errors, we always |
| * set data_length to a value between 0 and data_size. On error, setting |
| * the key to empty is a good choice because an empty key representation is |
| * unlikely to be accepted anywhere. */ |
| *data_length = 0; |
| |
| /* Exporting a public key doesn't require a usage flag. */ |
| status = psa_get_and_lock_key_slot_with_policy( key, &slot, 0, 0 ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| |
| status = psa_internal_export_key( slot, data, data_size, data_length, 1 ); |
| unlock_status = psa_unlock_key_slot( slot ); |
| |
| return( ( status == PSA_SUCCESS ) ? unlock_status : status ); |
| } |
| |
| #if defined(static_assert) |
| static_assert( ( MBEDTLS_PSA_KA_MASK_EXTERNAL_ONLY & MBEDTLS_PSA_KA_MASK_DUAL_USE ) == 0, |
| "One or more key attribute flag is listed as both external-only and dual-use" ); |
| static_assert( ( PSA_KA_MASK_INTERNAL_ONLY & MBEDTLS_PSA_KA_MASK_DUAL_USE ) == 0, |
| "One or more key attribute flag is listed as both internal-only and dual-use" ); |
| static_assert( ( PSA_KA_MASK_INTERNAL_ONLY & MBEDTLS_PSA_KA_MASK_EXTERNAL_ONLY ) == 0, |
| "One or more key attribute flag is listed as both internal-only and external-only" ); |
| #endif |
| |
| /** Validate that a key policy is internally well-formed. |
| * |
| * This function only rejects invalid policies. It does not validate the |
| * consistency of the policy with respect to other attributes of the key |
| * such as the key type. |
| */ |
| static psa_status_t psa_validate_key_policy( const psa_key_policy_t *policy ) |
| { |
| if( ( policy->usage & ~( PSA_KEY_USAGE_EXPORT | |
| PSA_KEY_USAGE_COPY | |
| PSA_KEY_USAGE_ENCRYPT | |
| PSA_KEY_USAGE_DECRYPT | |
| PSA_KEY_USAGE_SIGN_HASH | |
| PSA_KEY_USAGE_VERIFY_HASH | |
| PSA_KEY_USAGE_DERIVE ) ) != 0 ) |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| |
| return( PSA_SUCCESS ); |
| } |
| |
| /** Validate the internal consistency of key attributes. |
| * |
| * This function only rejects invalid attribute values. If does not |
| * validate the consistency of the attributes with any key data that may |
| * be involved in the creation of the key. |
| * |
| * Call this function early in the key creation process. |
| * |
| * \param[in] attributes Key attributes for the new key. |
| * \param[out] p_drv On any return, the driver for the key, if any. |
| * NULL for a transparent key. |
| * |
| */ |
| static psa_status_t psa_validate_key_attributes( |
| const psa_key_attributes_t *attributes, |
| psa_se_drv_table_entry_t **p_drv ) |
| { |
| psa_status_t status = PSA_ERROR_INVALID_ARGUMENT; |
| psa_key_lifetime_t lifetime = psa_get_key_lifetime( attributes ); |
| mbedtls_svc_key_id_t key = psa_get_key_id( attributes ); |
| |
| status = psa_validate_key_location( lifetime, p_drv ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| |
| status = psa_validate_key_persistence( lifetime ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| |
| if ( PSA_KEY_LIFETIME_IS_VOLATILE( lifetime ) ) |
| { |
| if( MBEDTLS_SVC_KEY_ID_GET_KEY_ID( key ) != 0 ) |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| } |
| else |
| { |
| status = psa_validate_key_id( psa_get_key_id( attributes ), 0 ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| } |
| |
| status = psa_validate_key_policy( &attributes->core.policy ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| |
| /* Refuse to create overly large keys. |
| * Note that this doesn't trigger on import if the attributes don't |
| * explicitly specify a size (so psa_get_key_bits returns 0), so |
| * psa_import_key() needs its own checks. */ |
| if( psa_get_key_bits( attributes ) > PSA_MAX_KEY_BITS ) |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| |
| /* Reject invalid flags. These should not be reachable through the API. */ |
| if( attributes->core.flags & ~ ( MBEDTLS_PSA_KA_MASK_EXTERNAL_ONLY | |
| MBEDTLS_PSA_KA_MASK_DUAL_USE ) ) |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| |
| return( PSA_SUCCESS ); |
| } |
| |
| /** Prepare a key slot to receive key material. |
| * |
| * This function allocates a key slot and sets its metadata. |
| * |
| * If this function fails, call psa_fail_key_creation(). |
| * |
| * This function is intended to be used as follows: |
| * -# Call psa_start_key_creation() to allocate a key slot, prepare |
| * it with the specified attributes, and in case of a volatile key assign it |
| * a volatile key identifier. |
| * -# Populate the slot with the key material. |
| * -# Call psa_finish_key_creation() to finalize the creation of the slot. |
| * In case of failure at any step, stop the sequence and call |
| * psa_fail_key_creation(). |
| * |
| * On success, the key slot is locked. It is the responsibility of the caller |
| * to unlock the key slot when it does not access it anymore. |
| * |
| * \param method An identification of the calling function. |
| * \param[in] attributes Key attributes for the new key. |
| * \param[out] p_slot On success, a pointer to the prepared slot. |
| * \param[out] p_drv On any return, the driver for the key, if any. |
| * NULL for a transparent key. |
| * |
| * \retval #PSA_SUCCESS |
| * The key slot is ready to receive key material. |
| * \return If this function fails, the key slot is an invalid state. |
| * You must call psa_fail_key_creation() to wipe and free the slot. |
| */ |
| static psa_status_t psa_start_key_creation( |
| psa_key_creation_method_t method, |
| const psa_key_attributes_t *attributes, |
| psa_key_slot_t **p_slot, |
| psa_se_drv_table_entry_t **p_drv ) |
| { |
| psa_status_t status; |
| psa_key_id_t volatile_key_id; |
| psa_key_slot_t *slot; |
| |
| (void) method; |
| *p_drv = NULL; |
| |
| status = psa_validate_key_attributes( attributes, p_drv ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| |
| status = psa_get_empty_key_slot( &volatile_key_id, p_slot ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| slot = *p_slot; |
| |
| /* We're storing the declared bit-size of the key. It's up to each |
| * creation mechanism to verify that this information is correct. |
| * It's automatically correct for mechanisms that use the bit-size as |
| * an input (generate, device) but not for those where the bit-size |
| * is optional (import, copy). In case of a volatile key, assign it the |
| * volatile key identifier associated to the slot returned to contain its |
| * definition. */ |
| |
| slot->attr = attributes->core; |
| if( PSA_KEY_LIFETIME_IS_VOLATILE( slot->attr.lifetime ) ) |
| { |
| #if !defined(MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER) |
| slot->attr.id = volatile_key_id; |
| #else |
| slot->attr.id.key_id = volatile_key_id; |
| #endif |
| } |
| |
| /* Erase external-only flags from the internal copy. To access |
| * external-only flags, query `attributes`. Thanks to the check |
| * in psa_validate_key_attributes(), this leaves the dual-use |
| * flags and any internal flag that psa_get_empty_key_slot() |
| * may have set. */ |
| slot->attr.flags &= ~MBEDTLS_PSA_KA_MASK_EXTERNAL_ONLY; |
| |
| #if defined(MBEDTLS_PSA_CRYPTO_SE_C) |
| /* For a key in a secure element, we need to do three things |
| * when creating or registering a persistent key: |
| * create the key file in internal storage, create the |
| * key inside the secure element, and update the driver's |
| * persistent data. This is done by starting a transaction that will |
| * encompass these three actions. |
| * For registering a volatile key, we just need to find an appropriate |
| * slot number inside the SE. Since the key is designated volatile, creating |
| * a transaction is not required. */ |
| /* The first thing to do is to find a slot number for the new key. |
| * We save the slot number in persistent storage as part of the |
| * transaction data. It will be needed to recover if the power |
| * fails during the key creation process, to clean up on the secure |
| * element side after restarting. Obtaining a slot number from the |
| * secure element driver updates its persistent state, but we do not yet |
| * save the driver's persistent state, so that if the power fails, |
| * we can roll back to a state where the key doesn't exist. */ |
| if( *p_drv != NULL ) |
| { |
| status = psa_find_se_slot_for_key( attributes, method, *p_drv, |
| &slot->data.se.slot_number ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| |
| if( ! PSA_KEY_LIFETIME_IS_VOLATILE( attributes->core.lifetime ) ) |
| { |
| psa_crypto_prepare_transaction( PSA_CRYPTO_TRANSACTION_CREATE_KEY ); |
| psa_crypto_transaction.key.lifetime = slot->attr.lifetime; |
| psa_crypto_transaction.key.slot = slot->data.se.slot_number; |
| psa_crypto_transaction.key.id = slot->attr.id; |
| status = psa_crypto_save_transaction( ); |
| if( status != PSA_SUCCESS ) |
| { |
| (void) psa_crypto_stop_transaction( ); |
| return( status ); |
| } |
| } |
| } |
| |
| if( *p_drv == NULL && method == PSA_KEY_CREATION_REGISTER ) |
| { |
| /* Key registration only makes sense with a secure element. */ |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| } |
| #endif /* MBEDTLS_PSA_CRYPTO_SE_C */ |
| |
| return( PSA_SUCCESS ); |
| } |
| |
| /** Finalize the creation of a key once its key material has been set. |
| * |
| * This entails writing the key to persistent storage. |
| * |
| * If this function fails, call psa_fail_key_creation(). |
| * See the documentation of psa_start_key_creation() for the intended use |
| * of this function. |
| * |
| * If the finalization succeeds, the function unlocks the key slot (it was |
| * locked by psa_start_key_creation()) and the key slot cannot be accessed |
| * anymore as part of the key creation process. |
| * |
| * \param[in,out] slot Pointer to the slot with key material. |
| * \param[in] driver The secure element driver for the key, |
| * or NULL for a transparent key. |
| * \param[out] key On success, identifier of the key. Note that the |
| * key identifier is also stored in the key slot. |
| * |
| * \retval #PSA_SUCCESS |
| * The key was successfully created. |
| * \return If this function fails, the key slot is an invalid state. |
| * You must call psa_fail_key_creation() to wipe and free the slot. |
| */ |
| static psa_status_t psa_finish_key_creation( |
| psa_key_slot_t *slot, |
| psa_se_drv_table_entry_t *driver, |
| mbedtls_svc_key_id_t *key) |
| { |
| psa_status_t status = PSA_SUCCESS; |
| (void) slot; |
| (void) driver; |
| |
| #if defined(MBEDTLS_PSA_CRYPTO_STORAGE_C) |
| if( ! PSA_KEY_LIFETIME_IS_VOLATILE( slot->attr.lifetime ) ) |
| { |
| #if defined(MBEDTLS_PSA_CRYPTO_SE_C) |
| if( driver != NULL ) |
| { |
| psa_se_key_data_storage_t data; |
| #if defined(static_assert) |
| static_assert( sizeof( slot->data.se.slot_number ) == |
| sizeof( data.slot_number ), |
| "Slot number size does not match psa_se_key_data_storage_t" ); |
| #endif |
| memcpy( &data.slot_number, &slot->data.se.slot_number, |
| sizeof( slot->data.se.slot_number ) ); |
| status = psa_save_persistent_key( &slot->attr, |
| (uint8_t*) &data, |
| sizeof( data ) ); |
| } |
| else |
| #endif /* MBEDTLS_PSA_CRYPTO_SE_C */ |
| { |
| /* Key material is saved in export representation in the slot, so |
| * just pass the slot buffer for storage. */ |
| status = psa_save_persistent_key( &slot->attr, |
| slot->data.key.data, |
| slot->data.key.bytes ); |
| } |
| } |
| #endif /* defined(MBEDTLS_PSA_CRYPTO_STORAGE_C) */ |
| |
| #if defined(MBEDTLS_PSA_CRYPTO_SE_C) |
| /* Finish the transaction for a key creation. This does not |
| * happen when registering an existing key. Detect this case |
| * by checking whether a transaction is in progress (actual |
| * creation of a persistent key in a secure element requires a transaction, |
| * but registration or volatile key creation doesn't use one). */ |
| if( driver != NULL && |
| psa_crypto_transaction.unknown.type == PSA_CRYPTO_TRANSACTION_CREATE_KEY ) |
| { |
| status = psa_save_se_persistent_data( driver ); |
| if( status != PSA_SUCCESS ) |
| { |
| psa_destroy_persistent_key( slot->attr.id ); |
| return( status ); |
| } |
| status = psa_crypto_stop_transaction( ); |
| } |
| #endif /* MBEDTLS_PSA_CRYPTO_SE_C */ |
| |
| if( status == PSA_SUCCESS ) |
| { |
| *key = slot->attr.id; |
| status = psa_unlock_key_slot( slot ); |
| if( status != PSA_SUCCESS ) |
| *key = MBEDTLS_SVC_KEY_ID_INIT; |
| } |
| |
| return( status ); |
| } |
| |
| /** Abort the creation of a key. |
| * |
| * You may call this function after calling psa_start_key_creation(), |
| * or after psa_finish_key_creation() fails. In other circumstances, this |
| * function may not clean up persistent storage. |
| * See the documentation of psa_start_key_creation() for the intended use |
| * of this function. |
| * |
| * \param[in,out] slot Pointer to the slot with key material. |
| * \param[in] driver The secure element driver for the key, |
| * or NULL for a transparent key. |
| */ |
| static void psa_fail_key_creation( psa_key_slot_t *slot, |
| psa_se_drv_table_entry_t *driver ) |
| { |
| (void) driver; |
| |
| if( slot == NULL ) |
| return; |
| |
| #if defined(MBEDTLS_PSA_CRYPTO_SE_C) |
| /* TODO: If the key has already been created in the secure |
| * element, and the failure happened later (when saving metadata |
| * to internal storage), we need to destroy the key in the secure |
| * element. |
| * https://github.com/ARMmbed/mbed-crypto/issues/217 |
| */ |
| |
| /* Abort the ongoing transaction if any (there may not be one if |
| * the creation process failed before starting one, or if the |
| * key creation is a registration of a key in a secure element). |
| * Earlier functions must already have done what it takes to undo any |
| * partial creation. All that's left is to update the transaction data |
| * itself. */ |
| (void) psa_crypto_stop_transaction( ); |
| #endif /* MBEDTLS_PSA_CRYPTO_SE_C */ |
| |
| psa_wipe_key_slot( slot ); |
| } |
| |
| /** Validate optional attributes during key creation. |
| * |
| * Some key attributes are optional during key creation. If they are |
| * specified in the attributes structure, check that they are consistent |
| * with the data in the slot. |
| * |
| * This function should be called near the end of key creation, after |
| * the slot in memory is fully populated but before saving persistent data. |
| */ |
| static psa_status_t psa_validate_optional_attributes( |
| const psa_key_slot_t *slot, |
| const psa_key_attributes_t *attributes ) |
| { |
| if( attributes->core.type != 0 ) |
| { |
| if( attributes->core.type != slot->attr.type ) |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| } |
| |
| if( attributes->domain_parameters_size != 0 ) |
| { |
| #if defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_KEY_PAIR) || \ |
| defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_PUBLIC_KEY) |
| if( PSA_KEY_TYPE_IS_RSA( slot->attr.type ) ) |
| { |
| mbedtls_rsa_context *rsa = NULL; |
| mbedtls_mpi actual, required; |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; |
| |
| psa_status_t status = psa_load_rsa_representation( |
| slot->attr.type, |
| slot->data.key.data, |
| slot->data.key.bytes, |
| &rsa ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| |
| mbedtls_mpi_init( &actual ); |
| mbedtls_mpi_init( &required ); |
| ret = mbedtls_rsa_export( rsa, |
| NULL, NULL, NULL, NULL, &actual ); |
| mbedtls_rsa_free( rsa ); |
| mbedtls_free( rsa ); |
| if( ret != 0 ) |
| goto rsa_exit; |
| ret = mbedtls_mpi_read_binary( &required, |
| attributes->domain_parameters, |
| attributes->domain_parameters_size ); |
| if( ret != 0 ) |
| goto rsa_exit; |
| if( mbedtls_mpi_cmp_mpi( &actual, &required ) != 0 ) |
| ret = MBEDTLS_ERR_RSA_BAD_INPUT_DATA; |
| rsa_exit: |
| mbedtls_mpi_free( &actual ); |
| mbedtls_mpi_free( &required ); |
| if( ret != 0) |
| return( mbedtls_to_psa_error( ret ) ); |
| } |
| else |
| #endif /* defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_KEY_PAIR) || |
| * defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_PUBLIC_KEY) */ |
| { |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| } |
| } |
| |
| if( attributes->core.bits != 0 ) |
| { |
| if( attributes->core.bits != slot->attr.bits ) |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| } |
| |
| return( PSA_SUCCESS ); |
| } |
| |
| psa_status_t psa_import_key( const psa_key_attributes_t *attributes, |
| const uint8_t *data, |
| size_t data_length, |
| mbedtls_svc_key_id_t *key ) |
| { |
| psa_status_t status; |
| psa_key_slot_t *slot = NULL; |
| psa_se_drv_table_entry_t *driver = NULL; |
| |
| *key = MBEDTLS_SVC_KEY_ID_INIT; |
| |
| /* Reject zero-length symmetric keys (including raw data key objects). |
| * This also rejects any key which might be encoded as an empty string, |
| * which is never valid. */ |
| if( data_length == 0 ) |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| |
| status = psa_start_key_creation( PSA_KEY_CREATION_IMPORT, attributes, |
| &slot, &driver ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| |
| #if defined(MBEDTLS_PSA_CRYPTO_SE_C) |
| if( driver != NULL ) |
| { |
| const psa_drv_se_t *drv = psa_get_se_driver_methods( driver ); |
| /* The driver should set the number of key bits, however in |
| * case it doesn't, we initialize bits to an invalid value. */ |
| size_t bits = PSA_MAX_KEY_BITS + 1; |
| if( drv->key_management == NULL || |
| drv->key_management->p_import == NULL ) |
| { |
| status = PSA_ERROR_NOT_SUPPORTED; |
| goto exit; |
| } |
| status = drv->key_management->p_import( |
| psa_get_se_driver_context( driver ), |
| slot->data.se.slot_number, attributes, data, data_length, |
| &bits ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| if( bits > PSA_MAX_KEY_BITS ) |
| { |
| status = PSA_ERROR_NOT_SUPPORTED; |
| goto exit; |
| } |
| slot->attr.bits = (psa_key_bits_t) bits; |
| } |
| else |
| #endif /* MBEDTLS_PSA_CRYPTO_SE_C */ |
| { |
| status = psa_import_key_into_slot( slot, data, data_length ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| } |
| status = psa_validate_optional_attributes( slot, attributes ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| |
| status = psa_finish_key_creation( slot, driver, key ); |
| exit: |
| if( status != PSA_SUCCESS ) |
| psa_fail_key_creation( slot, driver ); |
| |
| return( status ); |
| } |
| |
| #if defined(MBEDTLS_PSA_CRYPTO_SE_C) |
| psa_status_t mbedtls_psa_register_se_key( |
| const psa_key_attributes_t *attributes ) |
| { |
| psa_status_t status; |
| psa_key_slot_t *slot = NULL; |
| psa_se_drv_table_entry_t *driver = NULL; |
| mbedtls_svc_key_id_t key = MBEDTLS_SVC_KEY_ID_INIT; |
| |
| /* Leaving attributes unspecified is not currently supported. |
| * It could make sense to query the key type and size from the |
| * secure element, but not all secure elements support this |
| * and the driver HAL doesn't currently support it. */ |
| if( psa_get_key_type( attributes ) == PSA_KEY_TYPE_NONE ) |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| if( psa_get_key_bits( attributes ) == 0 ) |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| |
| status = psa_start_key_creation( PSA_KEY_CREATION_REGISTER, attributes, |
| &slot, &driver ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| |
| status = psa_finish_key_creation( slot, driver, &key ); |
| |
| exit: |
| if( status != PSA_SUCCESS ) |
| psa_fail_key_creation( slot, driver ); |
| |
| /* Registration doesn't keep the key in RAM. */ |
| psa_close_key( key ); |
| return( status ); |
| } |
| #endif /* MBEDTLS_PSA_CRYPTO_SE_C */ |
| |
| static psa_status_t psa_copy_key_material( const psa_key_slot_t *source, |
| psa_key_slot_t *target ) |
| { |
| psa_status_t status = psa_copy_key_material_into_slot( target, |
| source->data.key.data, |
| source->data.key.bytes ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| |
| target->attr.type = source->attr.type; |
| target->attr.bits = source->attr.bits; |
| |
| return( PSA_SUCCESS ); |
| } |
| |
| psa_status_t psa_copy_key( mbedtls_svc_key_id_t source_key, |
| const psa_key_attributes_t *specified_attributes, |
| mbedtls_svc_key_id_t *target_key ) |
| { |
| psa_status_t status = PSA_ERROR_CORRUPTION_DETECTED; |
| psa_status_t unlock_status = PSA_ERROR_CORRUPTION_DETECTED; |
| psa_key_slot_t *source_slot = NULL; |
| psa_key_slot_t *target_slot = NULL; |
| psa_key_attributes_t actual_attributes = *specified_attributes; |
| psa_se_drv_table_entry_t *driver = NULL; |
| |
| *target_key = MBEDTLS_SVC_KEY_ID_INIT; |
| |
| status = psa_get_and_lock_transparent_key_slot_with_policy( |
| source_key, &source_slot, PSA_KEY_USAGE_COPY, 0 ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| |
| status = psa_validate_optional_attributes( source_slot, |
| specified_attributes ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| |
| status = psa_restrict_key_policy( &actual_attributes.core.policy, |
| &source_slot->attr.policy ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| |
| status = psa_start_key_creation( PSA_KEY_CREATION_COPY, &actual_attributes, |
| &target_slot, &driver ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| |
| #if defined(MBEDTLS_PSA_CRYPTO_SE_C) |
| if( driver != NULL ) |
| { |
| /* Copying to a secure element is not implemented yet. */ |
| status = PSA_ERROR_NOT_SUPPORTED; |
| goto exit; |
| } |
| #endif /* MBEDTLS_PSA_CRYPTO_SE_C */ |
| |
| status = psa_copy_key_material( source_slot, target_slot ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| |
| status = psa_finish_key_creation( target_slot, driver, target_key ); |
| exit: |
| if( status != PSA_SUCCESS ) |
| psa_fail_key_creation( target_slot, driver ); |
| |
| unlock_status = psa_unlock_key_slot( source_slot ); |
| |
| return( ( status == PSA_SUCCESS ) ? unlock_status : status ); |
| } |
| |
| |
| |
| /****************************************************************/ |
| /* Message digests */ |
| /****************************************************************/ |
| |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_PKCS1V15_SIGN) || \ |
| defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_OAEP) || \ |
| defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_PSS) || \ |
| defined(MBEDTLS_PSA_BUILTIN_ALG_DETERMINISTIC_ECDSA) |
| static const mbedtls_md_info_t *mbedtls_md_info_from_psa( psa_algorithm_t alg ) |
| { |
| switch( alg ) |
| { |
| #if defined(MBEDTLS_MD2_C) |
| case PSA_ALG_MD2: |
| return( &mbedtls_md2_info ); |
| #endif |
| #if defined(MBEDTLS_MD4_C) |
| case PSA_ALG_MD4: |
| return( &mbedtls_md4_info ); |
| #endif |
| #if defined(MBEDTLS_MD5_C) |
| case PSA_ALG_MD5: |
| return( &mbedtls_md5_info ); |
| #endif |
| #if defined(MBEDTLS_RIPEMD160_C) |
| case PSA_ALG_RIPEMD160: |
| return( &mbedtls_ripemd160_info ); |
| #endif |
| #if defined(MBEDTLS_SHA1_C) |
| case PSA_ALG_SHA_1: |
| return( &mbedtls_sha1_info ); |
| #endif |
| #if defined(MBEDTLS_SHA256_C) |
| case PSA_ALG_SHA_224: |
| return( &mbedtls_sha224_info ); |
| case PSA_ALG_SHA_256: |
| return( &mbedtls_sha256_info ); |
| #endif |
| #if defined(MBEDTLS_SHA512_C) |
| #if !defined(MBEDTLS_SHA512_NO_SHA384) |
| case PSA_ALG_SHA_384: |
| return( &mbedtls_sha384_info ); |
| #endif |
| case PSA_ALG_SHA_512: |
| return( &mbedtls_sha512_info ); |
| #endif |
| default: |
| return( NULL ); |
| } |
| } |
| #endif /* defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_PKCS1V15_SIGN) || |
| * defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_OAEP) || |
| * defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_PSS) || |
| * defined(MBEDTLS_PSA_BUILTIN_ALG_DETERMINISTIC_ECDSA) */ |
| |
| psa_status_t psa_hash_abort( psa_hash_operation_t *operation ) |
| { |
| switch( operation->alg ) |
| { |
| case 0: |
| /* The object has (apparently) been initialized but it is not |
| * in use. It's ok to call abort on such an object, and there's |
| * nothing to do. */ |
| break; |
| #if defined(MBEDTLS_MD2_C) |
| case PSA_ALG_MD2: |
| mbedtls_md2_free( &operation->ctx.md2 ); |
| break; |
| #endif |
| #if defined(MBEDTLS_MD4_C) |
| case PSA_ALG_MD4: |
| mbedtls_md4_free( &operation->ctx.md4 ); |
| break; |
| #endif |
| #if defined(MBEDTLS_MD5_C) |
| case PSA_ALG_MD5: |
| mbedtls_md5_free( &operation->ctx.md5 ); |
| break; |
| #endif |
| #if defined(MBEDTLS_RIPEMD160_C) |
| case PSA_ALG_RIPEMD160: |
| mbedtls_ripemd160_free( &operation->ctx.ripemd160 ); |
| break; |
| #endif |
| #if defined(MBEDTLS_SHA1_C) |
| case PSA_ALG_SHA_1: |
| mbedtls_sha1_free( &operation->ctx.sha1 ); |
| break; |
| #endif |
| #if defined(MBEDTLS_SHA256_C) |
| case PSA_ALG_SHA_224: |
| case PSA_ALG_SHA_256: |
| mbedtls_sha256_free( &operation->ctx.sha256 ); |
| break; |
| #endif |
| #if defined(MBEDTLS_SHA512_C) |
| #if !defined(MBEDTLS_SHA512_NO_SHA384) |
| case PSA_ALG_SHA_384: |
| #endif |
| case PSA_ALG_SHA_512: |
| mbedtls_sha512_free( &operation->ctx.sha512 ); |
| break; |
| #endif |
| default: |
| return( PSA_ERROR_BAD_STATE ); |
| } |
| operation->alg = 0; |
| return( PSA_SUCCESS ); |
| } |
| |
| psa_status_t psa_hash_setup( psa_hash_operation_t *operation, |
| psa_algorithm_t alg ) |
| { |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; |
| |
| /* A context must be freshly initialized before it can be set up. */ |
| if( operation->alg != 0 ) |
| { |
| return( PSA_ERROR_BAD_STATE ); |
| } |
| |
| switch( alg ) |
| { |
| #if defined(MBEDTLS_MD2_C) |
| case PSA_ALG_MD2: |
| mbedtls_md2_init( &operation->ctx.md2 ); |
| ret = mbedtls_md2_starts_ret( &operation->ctx.md2 ); |
| break; |
| #endif |
| #if defined(MBEDTLS_MD4_C) |
| case PSA_ALG_MD4: |
| mbedtls_md4_init( &operation->ctx.md4 ); |
| ret = mbedtls_md4_starts_ret( &operation->ctx.md4 ); |
| break; |
| #endif |
| #if defined(MBEDTLS_MD5_C) |
| case PSA_ALG_MD5: |
| mbedtls_md5_init( &operation->ctx.md5 ); |
| ret = mbedtls_md5_starts_ret( &operation->ctx.md5 ); |
| break; |
| #endif |
| #if defined(MBEDTLS_RIPEMD160_C) |
| case PSA_ALG_RIPEMD160: |
| mbedtls_ripemd160_init( &operation->ctx.ripemd160 ); |
| ret = mbedtls_ripemd160_starts_ret( &operation->ctx.ripemd160 ); |
| break; |
| #endif |
| #if defined(MBEDTLS_SHA1_C) |
| case PSA_ALG_SHA_1: |
| mbedtls_sha1_init( &operation->ctx.sha1 ); |
| ret = mbedtls_sha1_starts_ret( &operation->ctx.sha1 ); |
| break; |
| #endif |
| #if defined(MBEDTLS_SHA256_C) |
| case PSA_ALG_SHA_224: |
| mbedtls_sha256_init( &operation->ctx.sha256 ); |
| ret = mbedtls_sha256_starts_ret( &operation->ctx.sha256, 1 ); |
| break; |
| case PSA_ALG_SHA_256: |
| mbedtls_sha256_init( &operation->ctx.sha256 ); |
| ret = mbedtls_sha256_starts_ret( &operation->ctx.sha256, 0 ); |
| break; |
| #endif |
| #if defined(MBEDTLS_SHA512_C) |
| #if !defined(MBEDTLS_SHA512_NO_SHA384) |
| case PSA_ALG_SHA_384: |
| mbedtls_sha512_init( &operation->ctx.sha512 ); |
| ret = mbedtls_sha512_starts_ret( &operation->ctx.sha512, 1 ); |
| break; |
| #endif |
| case PSA_ALG_SHA_512: |
| mbedtls_sha512_init( &operation->ctx.sha512 ); |
| ret = mbedtls_sha512_starts_ret( &operation->ctx.sha512, 0 ); |
| break; |
| #endif |
| default: |
| return( PSA_ALG_IS_HASH( alg ) ? |
| PSA_ERROR_NOT_SUPPORTED : |
| PSA_ERROR_INVALID_ARGUMENT ); |
| } |
| if( ret == 0 ) |
| operation->alg = alg; |
| else |
| psa_hash_abort( operation ); |
| return( mbedtls_to_psa_error( ret ) ); |
| } |
| |
| psa_status_t psa_hash_update( psa_hash_operation_t *operation, |
| const uint8_t *input, |
| size_t input_length ) |
| { |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; |
| |
| /* Don't require hash implementations to behave correctly on a |
| * zero-length input, which may have an invalid pointer. */ |
| if( input_length == 0 ) |
| return( PSA_SUCCESS ); |
| |
| switch( operation->alg ) |
| { |
| #if defined(MBEDTLS_MD2_C) |
| case PSA_ALG_MD2: |
| ret = mbedtls_md2_update_ret( &operation->ctx.md2, |
| input, input_length ); |
| break; |
| #endif |
| #if defined(MBEDTLS_MD4_C) |
| case PSA_ALG_MD4: |
| ret = mbedtls_md4_update_ret( &operation->ctx.md4, |
| input, input_length ); |
| break; |
| #endif |
| #if defined(MBEDTLS_MD5_C) |
| case PSA_ALG_MD5: |
| ret = mbedtls_md5_update_ret( &operation->ctx.md5, |
| input, input_length ); |
| break; |
| #endif |
| #if defined(MBEDTLS_RIPEMD160_C) |
| case PSA_ALG_RIPEMD160: |
| ret = mbedtls_ripemd160_update_ret( &operation->ctx.ripemd160, |
| input, input_length ); |
| break; |
| #endif |
| #if defined(MBEDTLS_SHA1_C) |
| case PSA_ALG_SHA_1: |
| ret = mbedtls_sha1_update_ret( &operation->ctx.sha1, |
| input, input_length ); |
| break; |
| #endif |
| #if defined(MBEDTLS_SHA256_C) |
| case PSA_ALG_SHA_224: |
| case PSA_ALG_SHA_256: |
| ret = mbedtls_sha256_update_ret( &operation->ctx.sha256, |
| input, input_length ); |
| break; |
| #endif |
| #if defined(MBEDTLS_SHA512_C) |
| #if !defined(MBEDTLS_SHA512_NO_SHA384) |
| case PSA_ALG_SHA_384: |
| #endif |
| case PSA_ALG_SHA_512: |
| ret = mbedtls_sha512_update_ret( &operation->ctx.sha512, |
| input, input_length ); |
| break; |
| #endif |
| default: |
| return( PSA_ERROR_BAD_STATE ); |
| } |
| |
| if( ret != 0 ) |
| psa_hash_abort( operation ); |
| return( mbedtls_to_psa_error( ret ) ); |
| } |
| |
| psa_status_t psa_hash_finish( psa_hash_operation_t *operation, |
| uint8_t *hash, |
| size_t hash_size, |
| size_t *hash_length ) |
| { |
| psa_status_t status; |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; |
| size_t actual_hash_length = PSA_HASH_SIZE( operation->alg ); |
| |
| /* Fill the output buffer with something that isn't a valid hash |
| * (barring an attack on the hash and deliberately-crafted input), |
| * in case the caller doesn't check the return status properly. */ |
| *hash_length = hash_size; |
| /* If hash_size is 0 then hash may be NULL and then the |
| * call to memset would have undefined behavior. */ |
| if( hash_size != 0 ) |
| memset( hash, '!', hash_size ); |
| |
| if( hash_size < actual_hash_length ) |
| { |
| status = PSA_ERROR_BUFFER_TOO_SMALL; |
| goto exit; |
| } |
| |
| switch( operation->alg ) |
| { |
| #if defined(MBEDTLS_MD2_C) |
| case PSA_ALG_MD2: |
| ret = mbedtls_md2_finish_ret( &operation->ctx.md2, hash ); |
| break; |
| #endif |
| #if defined(MBEDTLS_MD4_C) |
| case PSA_ALG_MD4: |
| ret = mbedtls_md4_finish_ret( &operation->ctx.md4, hash ); |
| break; |
| #endif |
| #if defined(MBEDTLS_MD5_C) |
| case PSA_ALG_MD5: |
| ret = mbedtls_md5_finish_ret( &operation->ctx.md5, hash ); |
| break; |
| #endif |
| #if defined(MBEDTLS_RIPEMD160_C) |
| case PSA_ALG_RIPEMD160: |
| ret = mbedtls_ripemd160_finish_ret( &operation->ctx.ripemd160, hash ); |
| break; |
| #endif |
| #if defined(MBEDTLS_SHA1_C) |
| case PSA_ALG_SHA_1: |
| ret = mbedtls_sha1_finish_ret( &operation->ctx.sha1, hash ); |
| break; |
| #endif |
| #if defined(MBEDTLS_SHA256_C) |
| case PSA_ALG_SHA_224: |
| case PSA_ALG_SHA_256: |
| ret = mbedtls_sha256_finish_ret( &operation->ctx.sha256, hash ); |
| break; |
| #endif |
| #if defined(MBEDTLS_SHA512_C) |
| #if !defined(MBEDTLS_SHA512_NO_SHA384) |
| case PSA_ALG_SHA_384: |
| #endif |
| case PSA_ALG_SHA_512: |
| ret = mbedtls_sha512_finish_ret( &operation->ctx.sha512, hash ); |
| break; |
| #endif |
| default: |
| return( PSA_ERROR_BAD_STATE ); |
| } |
| status = mbedtls_to_psa_error( ret ); |
| |
| exit: |
| if( status == PSA_SUCCESS ) |
| { |
| *hash_length = actual_hash_length; |
| return( psa_hash_abort( operation ) ); |
| } |
| else |
| { |
| psa_hash_abort( operation ); |
| return( status ); |
| } |
| } |
| |
| psa_status_t psa_hash_verify( psa_hash_operation_t *operation, |
| const uint8_t *hash, |
| size_t hash_length ) |
| { |
| uint8_t actual_hash[MBEDTLS_MD_MAX_SIZE]; |
| size_t actual_hash_length; |
| psa_status_t status = psa_hash_finish( operation, |
| actual_hash, sizeof( actual_hash ), |
| &actual_hash_length ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| if( actual_hash_length != hash_length ) |
| return( PSA_ERROR_INVALID_SIGNATURE ); |
| if( safer_memcmp( hash, actual_hash, actual_hash_length ) != 0 ) |
| return( PSA_ERROR_INVALID_SIGNATURE ); |
| return( PSA_SUCCESS ); |
| } |
| |
| psa_status_t psa_hash_compute( psa_algorithm_t alg, |
| const uint8_t *input, size_t input_length, |
| uint8_t *hash, size_t hash_size, |
| size_t *hash_length ) |
| { |
| psa_hash_operation_t operation = PSA_HASH_OPERATION_INIT; |
| psa_status_t status = PSA_ERROR_CORRUPTION_DETECTED; |
| |
| *hash_length = hash_size; |
| status = psa_hash_setup( &operation, alg ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| status = psa_hash_update( &operation, input, input_length ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| status = psa_hash_finish( &operation, hash, hash_size, hash_length ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| |
| exit: |
| if( status == PSA_SUCCESS ) |
| status = psa_hash_abort( &operation ); |
| else |
| psa_hash_abort( &operation ); |
| return( status ); |
| } |
| |
| psa_status_t psa_hash_compare( psa_algorithm_t alg, |
| const uint8_t *input, size_t input_length, |
| const uint8_t *hash, size_t hash_length ) |
| { |
| psa_hash_operation_t operation = PSA_HASH_OPERATION_INIT; |
| psa_status_t status = PSA_ERROR_CORRUPTION_DETECTED; |
| |
| status = psa_hash_setup( &operation, alg ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| status = psa_hash_update( &operation, input, input_length ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| status = psa_hash_verify( &operation, hash, hash_length ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| |
| exit: |
| if( status == PSA_SUCCESS ) |
| status = psa_hash_abort( &operation ); |
| else |
| psa_hash_abort( &operation ); |
| return( status ); |
| } |
| |
| psa_status_t psa_hash_clone( const psa_hash_operation_t *source_operation, |
| psa_hash_operation_t *target_operation ) |
| { |
| if( target_operation->alg != 0 ) |
| return( PSA_ERROR_BAD_STATE ); |
| |
| switch( source_operation->alg ) |
| { |
| case 0: |
| return( PSA_ERROR_BAD_STATE ); |
| #if defined(MBEDTLS_MD2_C) |
| case PSA_ALG_MD2: |
| mbedtls_md2_clone( &target_operation->ctx.md2, |
| &source_operation->ctx.md2 ); |
| break; |
| #endif |
| #if defined(MBEDTLS_MD4_C) |
| case PSA_ALG_MD4: |
| mbedtls_md4_clone( &target_operation->ctx.md4, |
| &source_operation->ctx.md4 ); |
| break; |
| #endif |
| #if defined(MBEDTLS_MD5_C) |
| case PSA_ALG_MD5: |
| mbedtls_md5_clone( &target_operation->ctx.md5, |
| &source_operation->ctx.md5 ); |
| break; |
| #endif |
| #if defined(MBEDTLS_RIPEMD160_C) |
| case PSA_ALG_RIPEMD160: |
| mbedtls_ripemd160_clone( &target_operation->ctx.ripemd160, |
| &source_operation->ctx.ripemd160 ); |
| break; |
| #endif |
| #if defined(MBEDTLS_SHA1_C) |
| case PSA_ALG_SHA_1: |
| mbedtls_sha1_clone( &target_operation->ctx.sha1, |
| &source_operation->ctx.sha1 ); |
| break; |
| #endif |
| #if defined(MBEDTLS_SHA256_C) |
| case PSA_ALG_SHA_224: |
| case PSA_ALG_SHA_256: |
| mbedtls_sha256_clone( &target_operation->ctx.sha256, |
| &source_operation->ctx.sha256 ); |
| break; |
| #endif |
| #if defined(MBEDTLS_SHA512_C) |
| #if !defined(MBEDTLS_SHA512_NO_SHA384) |
| case PSA_ALG_SHA_384: |
| #endif |
| case PSA_ALG_SHA_512: |
| mbedtls_sha512_clone( &target_operation->ctx.sha512, |
| &source_operation->ctx.sha512 ); |
| break; |
| #endif |
| default: |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| } |
| |
| target_operation->alg = source_operation->alg; |
| return( PSA_SUCCESS ); |
| } |
| |
| |
| /****************************************************************/ |
| /* MAC */ |
| /****************************************************************/ |
| |
| static const mbedtls_cipher_info_t *mbedtls_cipher_info_from_psa( |
| psa_algorithm_t alg, |
| psa_key_type_t key_type, |
| size_t key_bits, |
| mbedtls_cipher_id_t* cipher_id ) |
| { |
| mbedtls_cipher_mode_t mode; |
| mbedtls_cipher_id_t cipher_id_tmp; |
| |
| if( PSA_ALG_IS_AEAD( alg ) ) |
| alg = PSA_ALG_AEAD_WITH_TAG_LENGTH( alg, 0 ); |
| |
| if( PSA_ALG_IS_CIPHER( alg ) || PSA_ALG_IS_AEAD( alg ) ) |
| { |
| switch( alg ) |
| { |
| case PSA_ALG_ARC4: |
| case PSA_ALG_CHACHA20: |
| mode = MBEDTLS_MODE_STREAM; |
| break; |
| case PSA_ALG_CTR: |
| mode = MBEDTLS_MODE_CTR; |
| break; |
| case PSA_ALG_CFB: |
| mode = MBEDTLS_MODE_CFB; |
| break; |
| case PSA_ALG_OFB: |
| mode = MBEDTLS_MODE_OFB; |
| break; |
| case PSA_ALG_ECB_NO_PADDING: |
| mode = MBEDTLS_MODE_ECB; |
| break; |
| case PSA_ALG_CBC_NO_PADDING: |
| mode = MBEDTLS_MODE_CBC; |
| break; |
| case PSA_ALG_CBC_PKCS7: |
| mode = MBEDTLS_MODE_CBC; |
| break; |
| case PSA_ALG_AEAD_WITH_TAG_LENGTH( PSA_ALG_CCM, 0 ): |
| mode = MBEDTLS_MODE_CCM; |
| break; |
| case PSA_ALG_AEAD_WITH_TAG_LENGTH( PSA_ALG_GCM, 0 ): |
| mode = MBEDTLS_MODE_GCM; |
| break; |
| case PSA_ALG_AEAD_WITH_TAG_LENGTH( PSA_ALG_CHACHA20_POLY1305, 0 ): |
| mode = MBEDTLS_MODE_CHACHAPOLY; |
| break; |
| default: |
| return( NULL ); |
| } |
| } |
| else if( alg == PSA_ALG_CMAC ) |
| mode = MBEDTLS_MODE_ECB; |
| else |
| return( NULL ); |
| |
| switch( key_type ) |
| { |
| case PSA_KEY_TYPE_AES: |
| cipher_id_tmp = MBEDTLS_CIPHER_ID_AES; |
| break; |
| case PSA_KEY_TYPE_DES: |
| /* key_bits is 64 for Single-DES, 128 for two-key Triple-DES, |
| * and 192 for three-key Triple-DES. */ |
| if( key_bits == 64 ) |
| cipher_id_tmp = MBEDTLS_CIPHER_ID_DES; |
| else |
| cipher_id_tmp = MBEDTLS_CIPHER_ID_3DES; |
| /* mbedtls doesn't recognize two-key Triple-DES as an algorithm, |
| * but two-key Triple-DES is functionally three-key Triple-DES |
| * with K1=K3, so that's how we present it to mbedtls. */ |
| if( key_bits == 128 ) |
| key_bits = 192; |
| break; |
| case PSA_KEY_TYPE_CAMELLIA: |
| cipher_id_tmp = MBEDTLS_CIPHER_ID_CAMELLIA; |
| break; |
| case PSA_KEY_TYPE_ARC4: |
| cipher_id_tmp = MBEDTLS_CIPHER_ID_ARC4; |
| break; |
| case PSA_KEY_TYPE_CHACHA20: |
| cipher_id_tmp = MBEDTLS_CIPHER_ID_CHACHA20; |
| break; |
| default: |
| return( NULL ); |
| } |
| if( cipher_id != NULL ) |
| *cipher_id = cipher_id_tmp; |
| |
| return( mbedtls_cipher_info_from_values( cipher_id_tmp, |
| (int) key_bits, mode ) ); |
| } |
| |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_HMAC) |
| static size_t psa_get_hash_block_size( psa_algorithm_t alg ) |
| { |
| switch( alg ) |
| { |
| case PSA_ALG_MD2: |
| return( 16 ); |
| case PSA_ALG_MD4: |
| return( 64 ); |
| case PSA_ALG_MD5: |
| return( 64 ); |
| case PSA_ALG_RIPEMD160: |
| return( 64 ); |
| case PSA_ALG_SHA_1: |
| return( 64 ); |
| case PSA_ALG_SHA_224: |
| return( 64 ); |
| case PSA_ALG_SHA_256: |
| return( 64 ); |
| case PSA_ALG_SHA_384: |
| return( 128 ); |
| case PSA_ALG_SHA_512: |
| return( 128 ); |
| default: |
| return( 0 ); |
| } |
| } |
| #endif /* defined(MBEDTLS_PSA_BUILTIN_ALG_HMAC) */ |
| |
| /* Initialize the MAC operation structure. Once this function has been |
| * called, psa_mac_abort can run and will do the right thing. */ |
| static psa_status_t psa_mac_init( psa_mac_operation_t *operation, |
| psa_algorithm_t alg ) |
| { |
| psa_status_t status = PSA_ERROR_NOT_SUPPORTED; |
| |
| operation->alg = alg; |
| operation->key_set = 0; |
| operation->iv_set = 0; |
| operation->iv_required = 0; |
| operation->has_input = 0; |
| operation->is_sign = 0; |
| |
| #if defined(MBEDTLS_CMAC_C) |
| if( alg == PSA_ALG_CMAC ) |
| { |
| operation->iv_required = 0; |
| mbedtls_cipher_init( &operation->ctx.cmac ); |
| status = PSA_SUCCESS; |
| } |
| else |
| #endif /* MBEDTLS_CMAC_C */ |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_HMAC) |
| if( PSA_ALG_IS_HMAC( operation->alg ) ) |
| { |
| /* We'll set up the hash operation later in psa_hmac_setup_internal. */ |
| operation->ctx.hmac.hash_ctx.alg = 0; |
| status = PSA_SUCCESS; |
| } |
| else |
| #endif /* MBEDTLS_PSA_BUILTIN_ALG_HMAC */ |
| { |
| if( ! PSA_ALG_IS_MAC( alg ) ) |
| status = PSA_ERROR_INVALID_ARGUMENT; |
| } |
| |
| if( status != PSA_SUCCESS ) |
| memset( operation, 0, sizeof( *operation ) ); |
| return( status ); |
| } |
| |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_HMAC) |
| static psa_status_t psa_hmac_abort_internal( psa_hmac_internal_data *hmac ) |
| { |
| mbedtls_platform_zeroize( hmac->opad, sizeof( hmac->opad ) ); |
| return( psa_hash_abort( &hmac->hash_ctx ) ); |
| } |
| #endif /* MBEDTLS_PSA_BUILTIN_ALG_HMAC */ |
| |
| psa_status_t psa_mac_abort( psa_mac_operation_t *operation ) |
| { |
| if( operation->alg == 0 ) |
| { |
| /* The object has (apparently) been initialized but it is not |
| * in use. It's ok to call abort on such an object, and there's |
| * nothing to do. */ |
| return( PSA_SUCCESS ); |
| } |
| else |
| #if defined(MBEDTLS_CMAC_C) |
| if( operation->alg == PSA_ALG_CMAC ) |
| { |
| mbedtls_cipher_free( &operation->ctx.cmac ); |
| } |
| else |
| #endif /* MBEDTLS_CMAC_C */ |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_HMAC) |
| if( PSA_ALG_IS_HMAC( operation->alg ) ) |
| { |
| psa_hmac_abort_internal( &operation->ctx.hmac ); |
| } |
| else |
| #endif /* MBEDTLS_PSA_BUILTIN_ALG_HMAC */ |
| { |
| /* Sanity check (shouldn't happen: operation->alg should |
| * always have been initialized to a valid value). */ |
| goto bad_state; |
| } |
| |
| operation->alg = 0; |
| operation->key_set = 0; |
| operation->iv_set = 0; |
| operation->iv_required = 0; |
| operation->has_input = 0; |
| operation->is_sign = 0; |
| |
| return( PSA_SUCCESS ); |
| |
| bad_state: |
| /* If abort is called on an uninitialized object, we can't trust |
| * anything. Wipe the object in case it contains confidential data. |
| * This may result in a memory leak if a pointer gets overwritten, |
| * but it's too late to do anything about this. */ |
| memset( operation, 0, sizeof( *operation ) ); |
| return( PSA_ERROR_BAD_STATE ); |
| } |
| |
| #if defined(MBEDTLS_CMAC_C) |
| static int psa_cmac_setup( psa_mac_operation_t *operation, |
| size_t key_bits, |
| psa_key_slot_t *slot, |
| const mbedtls_cipher_info_t *cipher_info ) |
| { |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; |
| |
| operation->mac_size = cipher_info->block_size; |
| |
| ret = mbedtls_cipher_setup( &operation->ctx.cmac, cipher_info ); |
| if( ret != 0 ) |
| return( ret ); |
| |
| ret = mbedtls_cipher_cmac_starts( &operation->ctx.cmac, |
| slot->data.key.data, |
| key_bits ); |
| return( ret ); |
| } |
| #endif /* MBEDTLS_CMAC_C */ |
| |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_HMAC) |
| static psa_status_t psa_hmac_setup_internal( psa_hmac_internal_data *hmac, |
| const uint8_t *key, |
| size_t key_length, |
| psa_algorithm_t hash_alg ) |
| { |
| uint8_t ipad[PSA_HMAC_MAX_HASH_BLOCK_SIZE]; |
| size_t i; |
| size_t hash_size = PSA_HASH_SIZE( hash_alg ); |
| size_t block_size = psa_get_hash_block_size( hash_alg ); |
| psa_status_t status; |
| |
| /* Sanity checks on block_size, to guarantee that there won't be a buffer |
| * overflow below. This should never trigger if the hash algorithm |
| * is implemented correctly. */ |
| /* The size checks against the ipad and opad buffers cannot be written |
| * `block_size > sizeof( ipad ) || block_size > sizeof( hmac->opad )` |
| * because that triggers -Wlogical-op on GCC 7.3. */ |
| if( block_size > sizeof( ipad ) ) |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| if( block_size > sizeof( hmac->opad ) ) |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| if( block_size < hash_size ) |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| |
| if( key_length > block_size ) |
| { |
| status = psa_hash_compute( hash_alg, key, key_length, |
| ipad, sizeof( ipad ), &key_length ); |
| if( status != PSA_SUCCESS ) |
| goto cleanup; |
| } |
| /* A 0-length key is not commonly used in HMAC when used as a MAC, |
| * but it is permitted. It is common when HMAC is used in HKDF, for |
| * example. Don't call `memcpy` in the 0-length because `key` could be |
| * an invalid pointer which would make the behavior undefined. */ |
| else if( key_length != 0 ) |
| memcpy( ipad, key, key_length ); |
| |
| /* ipad contains the key followed by garbage. Xor and fill with 0x36 |
| * to create the ipad value. */ |
| for( i = 0; i < key_length; i++ ) |
| ipad[i] ^= 0x36; |
| memset( ipad + key_length, 0x36, block_size - key_length ); |
| |
| /* Copy the key material from ipad to opad, flipping the requisite bits, |
| * and filling the rest of opad with the requisite constant. */ |
| for( i = 0; i < key_length; i++ ) |
| hmac->opad[i] = ipad[i] ^ 0x36 ^ 0x5C; |
| memset( hmac->opad + key_length, 0x5C, block_size - key_length ); |
| |
| status = psa_hash_setup( &hmac->hash_ctx, hash_alg ); |
| if( status != PSA_SUCCESS ) |
| goto cleanup; |
| |
| status = psa_hash_update( &hmac->hash_ctx, ipad, block_size ); |
| |
| cleanup: |
| mbedtls_platform_zeroize( ipad, sizeof( ipad ) ); |
| |
| return( status ); |
| } |
| #endif /* MBEDTLS_PSA_BUILTIN_ALG_HMAC */ |
| |
| static psa_status_t psa_mac_setup( psa_mac_operation_t *operation, |
| mbedtls_svc_key_id_t key, |
| psa_algorithm_t alg, |
| int is_sign ) |
| { |
| psa_status_t status = PSA_ERROR_CORRUPTION_DETECTED; |
| psa_status_t unlock_status = PSA_ERROR_CORRUPTION_DETECTED; |
| psa_key_slot_t *slot; |
| size_t key_bits; |
| psa_key_usage_t usage = |
| is_sign ? PSA_KEY_USAGE_SIGN_HASH : PSA_KEY_USAGE_VERIFY_HASH; |
| uint8_t truncated = PSA_MAC_TRUNCATED_LENGTH( alg ); |
| psa_algorithm_t full_length_alg = PSA_ALG_FULL_LENGTH_MAC( alg ); |
| |
| /* A context must be freshly initialized before it can be set up. */ |
| if( operation->alg != 0 ) |
| { |
| return( PSA_ERROR_BAD_STATE ); |
| } |
| |
| status = psa_mac_init( operation, full_length_alg ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| if( is_sign ) |
| operation->is_sign = 1; |
| |
| status = psa_get_and_lock_transparent_key_slot_with_policy( |
| key, &slot, usage, alg ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| key_bits = psa_get_key_slot_bits( slot ); |
| |
| #if defined(MBEDTLS_CMAC_C) |
| if( full_length_alg == PSA_ALG_CMAC ) |
| { |
| const mbedtls_cipher_info_t *cipher_info = |
| mbedtls_cipher_info_from_psa( full_length_alg, |
| slot->attr.type, key_bits, NULL ); |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; |
| if( cipher_info == NULL ) |
| { |
| status = PSA_ERROR_NOT_SUPPORTED; |
| goto exit; |
| } |
| operation->mac_size = cipher_info->block_size; |
| ret = psa_cmac_setup( operation, key_bits, slot, cipher_info ); |
| status = mbedtls_to_psa_error( ret ); |
| } |
| else |
| #endif /* MBEDTLS_CMAC_C */ |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_HMAC) |
| if( PSA_ALG_IS_HMAC( full_length_alg ) ) |
| { |
| psa_algorithm_t hash_alg = PSA_ALG_HMAC_GET_HASH( alg ); |
| if( hash_alg == 0 ) |
| { |
| status = PSA_ERROR_NOT_SUPPORTED; |
| goto exit; |
| } |
| |
| operation->mac_size = PSA_HASH_SIZE( hash_alg ); |
| /* Sanity check. This shouldn't fail on a valid configuration. */ |
| if( operation->mac_size == 0 || |
| operation->mac_size > sizeof( operation->ctx.hmac.opad ) ) |
| { |
| status = PSA_ERROR_NOT_SUPPORTED; |
| goto exit; |
| } |
| |
| if( slot->attr.type != PSA_KEY_TYPE_HMAC ) |
| { |
| status = PSA_ERROR_INVALID_ARGUMENT; |
| goto exit; |
| } |
| |
| status = psa_hmac_setup_internal( &operation->ctx.hmac, |
| slot->data.key.data, |
| slot->data.key.bytes, |
| hash_alg ); |
| } |
| else |
| #endif /* MBEDTLS_PSA_BUILTIN_ALG_HMAC */ |
| { |
| (void) key_bits; |
| status = PSA_ERROR_NOT_SUPPORTED; |
| } |
| |
| if( truncated == 0 ) |
| { |
| /* The "normal" case: untruncated algorithm. Nothing to do. */ |
| } |
| else if( truncated < 4 ) |
| { |
| /* A very short MAC is too short for security since it can be |
| * brute-forced. Ancient protocols with 32-bit MACs do exist, |
| * so we make this our minimum, even though 32 bits is still |
| * too small for security. */ |
| status = PSA_ERROR_NOT_SUPPORTED; |
| } |
| else if( truncated > operation->mac_size ) |
| { |
| /* It's impossible to "truncate" to a larger length. */ |
| status = PSA_ERROR_INVALID_ARGUMENT; |
| } |
| else |
| operation->mac_size = truncated; |
| |
| exit: |
| if( status != PSA_SUCCESS ) |
| { |
| psa_mac_abort( operation ); |
| } |
| else |
| { |
| operation->key_set = 1; |
| } |
| |
| unlock_status = psa_unlock_key_slot( slot ); |
| |
| return( ( status == PSA_SUCCESS ) ? unlock_status : status ); |
| } |
| |
| psa_status_t psa_mac_sign_setup( psa_mac_operation_t *operation, |
| mbedtls_svc_key_id_t key, |
| psa_algorithm_t alg ) |
| { |
| return( psa_mac_setup( operation, key, alg, 1 ) ); |
| } |
| |
| psa_status_t psa_mac_verify_setup( psa_mac_operation_t *operation, |
| mbedtls_svc_key_id_t key, |
| psa_algorithm_t alg ) |
| { |
| return( psa_mac_setup( operation, key, alg, 0 ) ); |
| } |
| |
| psa_status_t psa_mac_update( psa_mac_operation_t *operation, |
| const uint8_t *input, |
| size_t input_length ) |
| { |
| psa_status_t status = PSA_ERROR_BAD_STATE; |
| if( ! operation->key_set ) |
| return( PSA_ERROR_BAD_STATE ); |
| if( operation->iv_required && ! operation->iv_set ) |
| return( PSA_ERROR_BAD_STATE ); |
| operation->has_input = 1; |
| |
| #if defined(MBEDTLS_CMAC_C) |
| if( operation->alg == PSA_ALG_CMAC ) |
| { |
| int ret = mbedtls_cipher_cmac_update( &operation->ctx.cmac, |
| input, input_length ); |
| status = mbedtls_to_psa_error( ret ); |
| } |
| else |
| #endif /* MBEDTLS_CMAC_C */ |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_HMAC) |
| if( PSA_ALG_IS_HMAC( operation->alg ) ) |
| { |
| status = psa_hash_update( &operation->ctx.hmac.hash_ctx, input, |
| input_length ); |
| } |
| else |
| #endif /* MBEDTLS_PSA_BUILTIN_ALG_HMAC */ |
| { |
| /* This shouldn't happen if `operation` was initialized by |
| * a setup function. */ |
| return( PSA_ERROR_BAD_STATE ); |
| } |
| |
| if( status != PSA_SUCCESS ) |
| psa_mac_abort( operation ); |
| return( status ); |
| } |
| |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_HMAC) |
| static psa_status_t psa_hmac_finish_internal( psa_hmac_internal_data *hmac, |
| uint8_t *mac, |
| size_t mac_size ) |
| { |
| uint8_t tmp[MBEDTLS_MD_MAX_SIZE]; |
| psa_algorithm_t hash_alg = hmac->hash_ctx.alg; |
| size_t hash_size = 0; |
| size_t block_size = psa_get_hash_block_size( hash_alg ); |
| psa_status_t status; |
| |
| status = psa_hash_finish( &hmac->hash_ctx, tmp, sizeof( tmp ), &hash_size ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| /* From here on, tmp needs to be wiped. */ |
| |
| status = psa_hash_setup( &hmac->hash_ctx, hash_alg ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| |
| status = psa_hash_update( &hmac->hash_ctx, hmac->opad, block_size ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| |
| status = psa_hash_update( &hmac->hash_ctx, tmp, hash_size ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| |
| status = psa_hash_finish( &hmac->hash_ctx, tmp, sizeof( tmp ), &hash_size ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| |
| memcpy( mac, tmp, mac_size ); |
| |
| exit: |
| mbedtls_platform_zeroize( tmp, hash_size ); |
| return( status ); |
| } |
| #endif /* MBEDTLS_PSA_BUILTIN_ALG_HMAC */ |
| |
| static psa_status_t psa_mac_finish_internal( psa_mac_operation_t *operation, |
| uint8_t *mac, |
| size_t mac_size ) |
| { |
| if( ! operation->key_set ) |
| return( PSA_ERROR_BAD_STATE ); |
| if( operation->iv_required && ! operation->iv_set ) |
| return( PSA_ERROR_BAD_STATE ); |
| |
| if( mac_size < operation->mac_size ) |
| return( PSA_ERROR_BUFFER_TOO_SMALL ); |
| |
| #if defined(MBEDTLS_CMAC_C) |
| if( operation->alg == PSA_ALG_CMAC ) |
| { |
| uint8_t tmp[PSA_MAX_BLOCK_CIPHER_BLOCK_SIZE]; |
| int ret = mbedtls_cipher_cmac_finish( &operation->ctx.cmac, tmp ); |
| if( ret == 0 ) |
| memcpy( mac, tmp, operation->mac_size ); |
| mbedtls_platform_zeroize( tmp, sizeof( tmp ) ); |
| return( mbedtls_to_psa_error( ret ) ); |
| } |
| else |
| #endif /* MBEDTLS_CMAC_C */ |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_HMAC) |
| if( PSA_ALG_IS_HMAC( operation->alg ) ) |
| { |
| return( psa_hmac_finish_internal( &operation->ctx.hmac, |
| mac, operation->mac_size ) ); |
| } |
| else |
| #endif /* MBEDTLS_PSA_BUILTIN_ALG_HMAC */ |
| { |
| /* This shouldn't happen if `operation` was initialized by |
| * a setup function. */ |
| return( PSA_ERROR_BAD_STATE ); |
| } |
| } |
| |
| psa_status_t psa_mac_sign_finish( psa_mac_operation_t *operation, |
| uint8_t *mac, |
| size_t mac_size, |
| size_t *mac_length ) |
| { |
| psa_status_t status; |
| |
| if( operation->alg == 0 ) |
| { |
| return( PSA_ERROR_BAD_STATE ); |
| } |
| |
| /* Fill the output buffer with something that isn't a valid mac |
| * (barring an attack on the mac and deliberately-crafted input), |
| * in case the caller doesn't check the return status properly. */ |
| *mac_length = mac_size; |
| /* If mac_size is 0 then mac may be NULL and then the |
| * call to memset would have undefined behavior. */ |
| if( mac_size != 0 ) |
| memset( mac, '!', mac_size ); |
| |
| if( ! operation->is_sign ) |
| { |
| return( PSA_ERROR_BAD_STATE ); |
| } |
| |
| status = psa_mac_finish_internal( operation, mac, mac_size ); |
| |
| if( status == PSA_SUCCESS ) |
| { |
| status = psa_mac_abort( operation ); |
| if( status == PSA_SUCCESS ) |
| *mac_length = operation->mac_size; |
| else |
| memset( mac, '!', mac_size ); |
| } |
| else |
| psa_mac_abort( operation ); |
| return( status ); |
| } |
| |
| psa_status_t psa_mac_verify_finish( psa_mac_operation_t *operation, |
| const uint8_t *mac, |
| size_t mac_length ) |
| { |
| uint8_t actual_mac[PSA_MAC_MAX_SIZE]; |
| psa_status_t status; |
| |
| if( operation->alg == 0 ) |
| { |
| return( PSA_ERROR_BAD_STATE ); |
| } |
| |
| if( operation->is_sign ) |
| { |
| return( PSA_ERROR_BAD_STATE ); |
| } |
| if( operation->mac_size != mac_length ) |
| { |
| status = PSA_ERROR_INVALID_SIGNATURE; |
| goto cleanup; |
| } |
| |
| status = psa_mac_finish_internal( operation, |
| actual_mac, sizeof( actual_mac ) ); |
| if( status != PSA_SUCCESS ) |
| goto cleanup; |
| |
| if( safer_memcmp( mac, actual_mac, mac_length ) != 0 ) |
| status = PSA_ERROR_INVALID_SIGNATURE; |
| |
| cleanup: |
| if( status == PSA_SUCCESS ) |
| status = psa_mac_abort( operation ); |
| else |
| psa_mac_abort( operation ); |
| |
| mbedtls_platform_zeroize( actual_mac, sizeof( actual_mac ) ); |
| |
| return( status ); |
| } |
| |
| |
| |
| /****************************************************************/ |
| /* Asymmetric cryptography */ |
| /****************************************************************/ |
| |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_PKCS1V15_SIGN) || \ |
| defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_PSS) |
| /* Decode the hash algorithm from alg and store the mbedtls encoding in |
| * md_alg. Verify that the hash length is acceptable. */ |
| static psa_status_t psa_rsa_decode_md_type( psa_algorithm_t alg, |
| size_t hash_length, |
| mbedtls_md_type_t *md_alg ) |
| { |
| psa_algorithm_t hash_alg = PSA_ALG_SIGN_GET_HASH( alg ); |
| const mbedtls_md_info_t *md_info = mbedtls_md_info_from_psa( hash_alg ); |
| *md_alg = mbedtls_md_get_type( md_info ); |
| |
| /* The Mbed TLS RSA module uses an unsigned int for hash length |
| * parameters. Validate that it fits so that we don't risk an |
| * overflow later. */ |
| #if SIZE_MAX > UINT_MAX |
| if( hash_length > UINT_MAX ) |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| #endif |
| |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_PKCS1V15_SIGN) |
| /* For PKCS#1 v1.5 signature, if using a hash, the hash length |
| * must be correct. */ |
| if( PSA_ALG_IS_RSA_PKCS1V15_SIGN( alg ) && |
| alg != PSA_ALG_RSA_PKCS1V15_SIGN_RAW ) |
| { |
| if( md_info == NULL ) |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| if( mbedtls_md_get_size( md_info ) != hash_length ) |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| } |
| #endif /* MBEDTLS_PSA_BUILTIN_ALG_RSA_PKCS1V15_SIGN */ |
| |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_PSS) |
| /* PSS requires a hash internally. */ |
| if( PSA_ALG_IS_RSA_PSS( alg ) ) |
| { |
| if( md_info == NULL ) |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| } |
| #endif /* MBEDTLS_PSA_BUILTIN_ALG_RSA_PSS */ |
| |
| return( PSA_SUCCESS ); |
| } |
| |
| static psa_status_t psa_rsa_sign( mbedtls_rsa_context *rsa, |
| psa_algorithm_t alg, |
| const uint8_t *hash, |
| size_t hash_length, |
| uint8_t *signature, |
| size_t signature_size, |
| size_t *signature_length ) |
| { |
| psa_status_t status; |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; |
| mbedtls_md_type_t md_alg; |
| |
| status = psa_rsa_decode_md_type( alg, hash_length, &md_alg ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| |
| if( signature_size < mbedtls_rsa_get_len( rsa ) ) |
| return( PSA_ERROR_BUFFER_TOO_SMALL ); |
| |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_PKCS1V15_SIGN) |
| if( PSA_ALG_IS_RSA_PKCS1V15_SIGN( alg ) ) |
| { |
| mbedtls_rsa_set_padding( rsa, MBEDTLS_RSA_PKCS_V15, |
| MBEDTLS_MD_NONE ); |
| ret = mbedtls_rsa_pkcs1_sign( rsa, |
| mbedtls_ctr_drbg_random, |
| &global_data.ctr_drbg, |
| MBEDTLS_RSA_PRIVATE, |
| md_alg, |
| (unsigned int) hash_length, |
| hash, |
| signature ); |
| } |
| else |
| #endif /* MBEDTLS_PSA_BUILTIN_ALG_RSA_PKCS1V15_SIGN */ |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_PSS) |
| if( PSA_ALG_IS_RSA_PSS( alg ) ) |
| { |
| mbedtls_rsa_set_padding( rsa, MBEDTLS_RSA_PKCS_V21, md_alg ); |
| ret = mbedtls_rsa_rsassa_pss_sign( rsa, |
| mbedtls_ctr_drbg_random, |
| &global_data.ctr_drbg, |
| MBEDTLS_RSA_PRIVATE, |
| MBEDTLS_MD_NONE, |
| (unsigned int) hash_length, |
| hash, |
| signature ); |
| } |
| else |
| #endif /* MBEDTLS_PSA_BUILTIN_ALG_RSA_PSS */ |
| { |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| } |
| |
| if( ret == 0 ) |
| *signature_length = mbedtls_rsa_get_len( rsa ); |
| return( mbedtls_to_psa_error( ret ) ); |
| } |
| |
| static psa_status_t psa_rsa_verify( mbedtls_rsa_context *rsa, |
| psa_algorithm_t alg, |
| const uint8_t *hash, |
| size_t hash_length, |
| const uint8_t *signature, |
| size_t signature_length ) |
| { |
| psa_status_t status; |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; |
| mbedtls_md_type_t md_alg; |
| |
| status = psa_rsa_decode_md_type( alg, hash_length, &md_alg ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| |
| if( signature_length != mbedtls_rsa_get_len( rsa ) ) |
| return( PSA_ERROR_INVALID_SIGNATURE ); |
| |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_PKCS1V15_SIGN) |
| if( PSA_ALG_IS_RSA_PKCS1V15_SIGN( alg ) ) |
| { |
| mbedtls_rsa_set_padding( rsa, MBEDTLS_RSA_PKCS_V15, |
| MBEDTLS_MD_NONE ); |
| ret = mbedtls_rsa_pkcs1_verify( rsa, |
| mbedtls_ctr_drbg_random, |
| &global_data.ctr_drbg, |
| MBEDTLS_RSA_PUBLIC, |
| md_alg, |
| (unsigned int) hash_length, |
| hash, |
| signature ); |
| } |
| else |
| #endif /* MBEDTLS_PSA_BUILTIN_ALG_RSA_PKCS1V15_SIGN */ |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_PSS) |
| if( PSA_ALG_IS_RSA_PSS( alg ) ) |
| { |
| mbedtls_rsa_set_padding( rsa, MBEDTLS_RSA_PKCS_V21, md_alg ); |
| ret = mbedtls_rsa_rsassa_pss_verify( rsa, |
| mbedtls_ctr_drbg_random, |
| &global_data.ctr_drbg, |
| MBEDTLS_RSA_PUBLIC, |
| MBEDTLS_MD_NONE, |
| (unsigned int) hash_length, |
| hash, |
| signature ); |
| } |
| else |
| #endif /* MBEDTLS_PSA_BUILTIN_ALG_RSA_PSS */ |
| { |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| } |
| |
| /* Mbed TLS distinguishes "invalid padding" from "valid padding but |
| * the rest of the signature is invalid". This has little use in |
| * practice and PSA doesn't report this distinction. */ |
| if( ret == MBEDTLS_ERR_RSA_INVALID_PADDING ) |
| return( PSA_ERROR_INVALID_SIGNATURE ); |
| return( mbedtls_to_psa_error( ret ) ); |
| } |
| #endif /* defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_PKCS1V15_SIGN) || |
| * defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_PSS) */ |
| |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_ECDSA) || \ |
| defined(MBEDTLS_PSA_BUILTIN_ALG_DETERMINISTIC_ECDSA) |
| /* `ecp` cannot be const because `ecp->grp` needs to be non-const |
| * for mbedtls_ecdsa_sign() and mbedtls_ecdsa_sign_det() |
| * (even though these functions don't modify it). */ |
| static psa_status_t psa_ecdsa_sign( mbedtls_ecp_keypair *ecp, |
| psa_algorithm_t alg, |
| const uint8_t *hash, |
| size_t hash_length, |
| uint8_t *signature, |
| size_t signature_size, |
| size_t *signature_length ) |
| { |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; |
| mbedtls_mpi r, s; |
| size_t curve_bytes = PSA_BITS_TO_BYTES( ecp->grp.pbits ); |
| mbedtls_mpi_init( &r ); |
| mbedtls_mpi_init( &s ); |
| |
| if( signature_size < 2 * curve_bytes ) |
| { |
| ret = MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL; |
| goto cleanup; |
| } |
| |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_DETERMINISTIC_ECDSA) |
| if( PSA_ALG_DSA_IS_DETERMINISTIC( alg ) ) |
| { |
| psa_algorithm_t hash_alg = PSA_ALG_SIGN_GET_HASH( alg ); |
| const mbedtls_md_info_t *md_info = mbedtls_md_info_from_psa( hash_alg ); |
| mbedtls_md_type_t md_alg = mbedtls_md_get_type( md_info ); |
| MBEDTLS_MPI_CHK( mbedtls_ecdsa_sign_det_ext( &ecp->grp, &r, &s, |
| &ecp->d, hash, |
| hash_length, md_alg, |
| mbedtls_ctr_drbg_random, |
| &global_data.ctr_drbg ) ); |
| } |
| else |
| #endif /* defined(MBEDTLS_PSA_BUILTIN_ALG_DETERMINISTIC_ECDSA) */ |
| { |
| (void) alg; |
| MBEDTLS_MPI_CHK( mbedtls_ecdsa_sign( &ecp->grp, &r, &s, &ecp->d, |
| hash, hash_length, |
| mbedtls_ctr_drbg_random, |
| &global_data.ctr_drbg ) ); |
| } |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_write_binary( &r, |
| signature, |
| curve_bytes ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_write_binary( &s, |
| signature + curve_bytes, |
| curve_bytes ) ); |
| |
| cleanup: |
| mbedtls_mpi_free( &r ); |
| mbedtls_mpi_free( &s ); |
| if( ret == 0 ) |
| *signature_length = 2 * curve_bytes; |
| return( mbedtls_to_psa_error( ret ) ); |
| } |
| |
| static psa_status_t psa_ecdsa_verify( mbedtls_ecp_keypair *ecp, |
| const uint8_t *hash, |
| size_t hash_length, |
| const uint8_t *signature, |
| size_t signature_length ) |
| { |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; |
| mbedtls_mpi r, s; |
| size_t curve_bytes = PSA_BITS_TO_BYTES( ecp->grp.pbits ); |
| mbedtls_mpi_init( &r ); |
| mbedtls_mpi_init( &s ); |
| |
| if( signature_length != 2 * curve_bytes ) |
| return( PSA_ERROR_INVALID_SIGNATURE ); |
| |
| MBEDTLS_MPI_CHK( mbedtls_mpi_read_binary( &r, |
| signature, |
| curve_bytes ) ); |
| MBEDTLS_MPI_CHK( mbedtls_mpi_read_binary( &s, |
| signature + curve_bytes, |
| curve_bytes ) ); |
| |
| /* Check whether the public part is loaded. If not, load it. */ |
| if( mbedtls_ecp_is_zero( &ecp->Q ) ) |
| { |
| MBEDTLS_MPI_CHK( |
| mbedtls_ecp_mul( &ecp->grp, &ecp->Q, &ecp->d, &ecp->grp.G, |
| mbedtls_ctr_drbg_random, &global_data.ctr_drbg ) ); |
| } |
| |
| ret = mbedtls_ecdsa_verify( &ecp->grp, hash, hash_length, |
| &ecp->Q, &r, &s ); |
| |
| cleanup: |
| mbedtls_mpi_free( &r ); |
| mbedtls_mpi_free( &s ); |
| return( mbedtls_to_psa_error( ret ) ); |
| } |
| #endif /* defined(MBEDTLS_PSA_BUILTIN_ALG_ECDSA) || |
| * defined(MBEDTLS_PSA_BUILTIN_ALG_DETERMINISTIC_ECDSA) */ |
| |
| psa_status_t psa_sign_hash( mbedtls_svc_key_id_t key, |
| psa_algorithm_t alg, |
| const uint8_t *hash, |
| size_t hash_length, |
| uint8_t *signature, |
| size_t signature_size, |
| size_t *signature_length ) |
| { |
| psa_status_t status = PSA_ERROR_CORRUPTION_DETECTED; |
| psa_status_t unlock_status = PSA_ERROR_CORRUPTION_DETECTED; |
| psa_key_slot_t *slot; |
| |
| *signature_length = signature_size; |
| /* Immediately reject a zero-length signature buffer. This guarantees |
| * that signature must be a valid pointer. (On the other hand, the hash |
| * buffer can in principle be empty since it doesn't actually have |
| * to be a hash.) */ |
| if( signature_size == 0 ) |
| return( PSA_ERROR_BUFFER_TOO_SMALL ); |
| |
| status = psa_get_and_lock_key_slot_with_policy( key, &slot, |
| PSA_KEY_USAGE_SIGN_HASH, |
| alg ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| if( ! PSA_KEY_TYPE_IS_KEY_PAIR( slot->attr.type ) ) |
| { |
| status = PSA_ERROR_INVALID_ARGUMENT; |
| goto exit; |
| } |
| |
| /* Try any of the available accelerators first */ |
| status = psa_driver_wrapper_sign_hash( slot, |
| alg, |
| hash, |
| hash_length, |
| signature, |
| signature_size, |
| signature_length ); |
| if( status != PSA_ERROR_NOT_SUPPORTED || |
| psa_key_lifetime_is_external( slot->attr.lifetime ) ) |
| goto exit; |
| |
| /* If the operation was not supported by any accelerator, try fallback. */ |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_PKCS1V15_SIGN) || \ |
| defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_PSS) |
| if( slot->attr.type == PSA_KEY_TYPE_RSA_KEY_PAIR ) |
| { |
| mbedtls_rsa_context *rsa = NULL; |
| |
| status = psa_load_rsa_representation( slot->attr.type, |
| slot->data.key.data, |
| slot->data.key.bytes, |
| &rsa ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| |
| status = psa_rsa_sign( rsa, |
| alg, |
| hash, hash_length, |
| signature, signature_size, |
| signature_length ); |
| |
| mbedtls_rsa_free( rsa ); |
| mbedtls_free( rsa ); |
| } |
| else |
| #endif /* defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_PKCS1V15_SIGN) || |
| * defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_PSS) */ |
| if( PSA_KEY_TYPE_IS_ECC( slot->attr.type ) ) |
| { |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_ECDSA) || \ |
| defined(MBEDTLS_PSA_BUILTIN_ALG_DETERMINISTIC_ECDSA) |
| if( |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_DETERMINISTIC_ECDSA) |
| PSA_ALG_IS_ECDSA( alg ) |
| #else |
| PSA_ALG_IS_RANDOMIZED_ECDSA( alg ) |
| #endif |
| ) |
| { |
| mbedtls_ecp_keypair *ecp = NULL; |
| status = psa_load_ecp_representation( slot->attr.type, |
| slot->data.key.data, |
| slot->data.key.bytes, |
| &ecp ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| status = psa_ecdsa_sign( ecp, |
| alg, |
| hash, hash_length, |
| signature, signature_size, |
| signature_length ); |
| mbedtls_ecp_keypair_free( ecp ); |
| mbedtls_free( ecp ); |
| } |
| else |
| #endif /* defined(MBEDTLS_PSA_BUILTIN_ALG_ECDSA) || |
| * defined(MBEDTLS_PSA_BUILTIN_ALG_DETERMINISTIC_ECDSA) */ |
| { |
| status = PSA_ERROR_INVALID_ARGUMENT; |
| } |
| } |
| else |
| { |
| status = PSA_ERROR_NOT_SUPPORTED; |
| } |
| |
| exit: |
| /* Fill the unused part of the output buffer (the whole buffer on error, |
| * the trailing part on success) with something that isn't a valid mac |
| * (barring an attack on the mac and deliberately-crafted input), |
| * in case the caller doesn't check the return status properly. */ |
| if( status == PSA_SUCCESS ) |
| memset( signature + *signature_length, '!', |
| signature_size - *signature_length ); |
| else |
| memset( signature, '!', signature_size ); |
| /* If signature_size is 0 then we have nothing to do. We must not call |
| * memset because signature may be NULL in this case. */ |
| |
| unlock_status = psa_unlock_key_slot( slot ); |
| |
| return( ( status == PSA_SUCCESS ) ? unlock_status : status ); |
| } |
| |
| psa_status_t psa_verify_hash( mbedtls_svc_key_id_t key, |
| psa_algorithm_t alg, |
| const uint8_t *hash, |
| size_t hash_length, |
| const uint8_t *signature, |
| size_t signature_length ) |
| { |
| psa_status_t status = PSA_ERROR_CORRUPTION_DETECTED; |
| psa_status_t unlock_status = PSA_ERROR_CORRUPTION_DETECTED; |
| psa_key_slot_t *slot; |
| |
| status = psa_get_and_lock_key_slot_with_policy( key, &slot, |
| PSA_KEY_USAGE_VERIFY_HASH, |
| alg ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| |
| /* Try any of the available accelerators first */ |
| status = psa_driver_wrapper_verify_hash( slot, |
| alg, |
| hash, |
| hash_length, |
| signature, |
| signature_length ); |
| if( status != PSA_ERROR_NOT_SUPPORTED || |
| psa_key_lifetime_is_external( slot->attr.lifetime ) ) |
| goto exit; |
| |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_PKCS1V15_SIGN) || \ |
| defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_PSS) |
| if( PSA_KEY_TYPE_IS_RSA( slot->attr.type ) ) |
| { |
| mbedtls_rsa_context *rsa = NULL; |
| |
| status = psa_load_rsa_representation( slot->attr.type, |
| slot->data.key.data, |
| slot->data.key.bytes, |
| &rsa ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| |
| status = psa_rsa_verify( rsa, |
| alg, |
| hash, hash_length, |
| signature, signature_length ); |
| mbedtls_rsa_free( rsa ); |
| mbedtls_free( rsa ); |
| goto exit; |
| } |
| else |
| #endif /* defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_PKCS1V15_SIGN) || |
| * defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_PSS) */ |
| if( PSA_KEY_TYPE_IS_ECC( slot->attr.type ) ) |
| { |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_ECDSA) || \ |
| defined(MBEDTLS_PSA_BUILTIN_ALG_DETERMINISTIC_ECDSA) |
| if( PSA_ALG_IS_ECDSA( alg ) ) |
| { |
| mbedtls_ecp_keypair *ecp = NULL; |
| status = psa_load_ecp_representation( slot->attr.type, |
| slot->data.key.data, |
| slot->data.key.bytes, |
| &ecp ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| status = psa_ecdsa_verify( ecp, |
| hash, hash_length, |
| signature, signature_length ); |
| mbedtls_ecp_keypair_free( ecp ); |
| mbedtls_free( ecp ); |
| goto exit; |
| } |
| else |
| #endif /* defined(MBEDTLS_PSA_BUILTIN_ALG_ECDSA) || |
| * defined(MBEDTLS_PSA_BUILTIN_ALG_DETERMINISTIC_ECDSA) */ |
| { |
| status = PSA_ERROR_INVALID_ARGUMENT; |
| goto exit; |
| } |
| } |
| else |
| { |
| status = PSA_ERROR_NOT_SUPPORTED; |
| } |
| |
| exit: |
| unlock_status = psa_unlock_key_slot( slot ); |
| |
| return( ( status == PSA_SUCCESS ) ? unlock_status : status ); |
| } |
| |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_OAEP) |
| static void psa_rsa_oaep_set_padding_mode( psa_algorithm_t alg, |
| mbedtls_rsa_context *rsa ) |
| { |
| psa_algorithm_t hash_alg = PSA_ALG_RSA_OAEP_GET_HASH( alg ); |
| const mbedtls_md_info_t *md_info = mbedtls_md_info_from_psa( hash_alg ); |
| mbedtls_md_type_t md_alg = mbedtls_md_get_type( md_info ); |
| mbedtls_rsa_set_padding( rsa, MBEDTLS_RSA_PKCS_V21, md_alg ); |
| } |
| #endif /* defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_OAEP) */ |
| |
| psa_status_t psa_asymmetric_encrypt( mbedtls_svc_key_id_t key, |
| psa_algorithm_t alg, |
| const uint8_t *input, |
| size_t input_length, |
| const uint8_t *salt, |
| size_t salt_length, |
| uint8_t *output, |
| size_t output_size, |
| size_t *output_length ) |
| { |
| psa_status_t status = PSA_ERROR_CORRUPTION_DETECTED; |
| psa_status_t unlock_status = PSA_ERROR_CORRUPTION_DETECTED; |
| psa_key_slot_t *slot; |
| |
| (void) input; |
| (void) input_length; |
| (void) salt; |
| (void) output; |
| (void) output_size; |
| |
| *output_length = 0; |
| |
| if( ! PSA_ALG_IS_RSA_OAEP( alg ) && salt_length != 0 ) |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| |
| status = psa_get_and_lock_transparent_key_slot_with_policy( |
| key, &slot, PSA_KEY_USAGE_ENCRYPT, alg ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| if( ! ( PSA_KEY_TYPE_IS_PUBLIC_KEY( slot->attr.type ) || |
| PSA_KEY_TYPE_IS_KEY_PAIR( slot->attr.type ) ) ) |
| { |
| status = PSA_ERROR_INVALID_ARGUMENT; |
| goto exit; |
| } |
| |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_PKCS1V15_CRYPT) || \ |
| defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_OAEP) |
| if( PSA_KEY_TYPE_IS_RSA( slot->attr.type ) ) |
| { |
| mbedtls_rsa_context *rsa = NULL; |
| status = psa_load_rsa_representation( slot->attr.type, |
| slot->data.key.data, |
| slot->data.key.bytes, |
| &rsa ); |
| if( status != PSA_SUCCESS ) |
| goto rsa_exit; |
| |
| if( output_size < mbedtls_rsa_get_len( rsa ) ) |
| { |
| status = PSA_ERROR_BUFFER_TOO_SMALL; |
| goto rsa_exit; |
| } |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_PKCS1V15_CRYPT) |
| if( alg == PSA_ALG_RSA_PKCS1V15_CRYPT ) |
| { |
| status = mbedtls_to_psa_error( |
| mbedtls_rsa_pkcs1_encrypt( rsa, |
| mbedtls_ctr_drbg_random, |
| &global_data.ctr_drbg, |
| MBEDTLS_RSA_PUBLIC, |
| input_length, |
| input, |
| output ) ); |
| } |
| else |
| #endif /* MBEDTLS_PSA_BUILTIN_ALG_RSA_PKCS1V15_CRYPT */ |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_OAEP) |
| if( PSA_ALG_IS_RSA_OAEP( alg ) ) |
| { |
| psa_rsa_oaep_set_padding_mode( alg, rsa ); |
| status = mbedtls_to_psa_error( |
| mbedtls_rsa_rsaes_oaep_encrypt( rsa, |
| mbedtls_ctr_drbg_random, |
| &global_data.ctr_drbg, |
| MBEDTLS_RSA_PUBLIC, |
| salt, salt_length, |
| input_length, |
| input, |
| output ) ); |
| } |
| else |
| #endif /* MBEDTLS_PSA_BUILTIN_ALG_RSA_OAEP */ |
| { |
| status = PSA_ERROR_INVALID_ARGUMENT; |
| goto rsa_exit; |
| } |
| rsa_exit: |
| if( status == PSA_SUCCESS ) |
| *output_length = mbedtls_rsa_get_len( rsa ); |
| |
| mbedtls_rsa_free( rsa ); |
| mbedtls_free( rsa ); |
| } |
| else |
| #endif /* defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_PKCS1V15_CRYPT) || |
| * defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_OAEP) */ |
| { |
| status = PSA_ERROR_NOT_SUPPORTED; |
| } |
| |
| exit: |
| unlock_status = psa_unlock_key_slot( slot ); |
| |
| return( ( status == PSA_SUCCESS ) ? unlock_status : status ); |
| } |
| |
| psa_status_t psa_asymmetric_decrypt( mbedtls_svc_key_id_t key, |
| psa_algorithm_t alg, |
| const uint8_t *input, |
| size_t input_length, |
| const uint8_t *salt, |
| size_t salt_length, |
| uint8_t *output, |
| size_t output_size, |
| size_t *output_length ) |
| { |
| psa_status_t status = PSA_ERROR_CORRUPTION_DETECTED; |
| psa_status_t unlock_status = PSA_ERROR_CORRUPTION_DETECTED; |
| psa_key_slot_t *slot; |
| |
| (void) input; |
| (void) input_length; |
| (void) salt; |
| (void) output; |
| (void) output_size; |
| |
| *output_length = 0; |
| |
| if( ! PSA_ALG_IS_RSA_OAEP( alg ) && salt_length != 0 ) |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| |
| status = psa_get_and_lock_transparent_key_slot_with_policy( |
| key, &slot, PSA_KEY_USAGE_DECRYPT, alg ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| if( ! PSA_KEY_TYPE_IS_KEY_PAIR( slot->attr.type ) ) |
| { |
| status = PSA_ERROR_INVALID_ARGUMENT; |
| goto exit; |
| } |
| |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_PKCS1V15_CRYPT) || \ |
| defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_OAEP) |
| if( slot->attr.type == PSA_KEY_TYPE_RSA_KEY_PAIR ) |
| { |
| mbedtls_rsa_context *rsa = NULL; |
| status = psa_load_rsa_representation( slot->attr.type, |
| slot->data.key.data, |
| slot->data.key.bytes, |
| &rsa ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| |
| if( input_length != mbedtls_rsa_get_len( rsa ) ) |
| { |
| status = PSA_ERROR_INVALID_ARGUMENT; |
| goto rsa_exit; |
| } |
| |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_PKCS1V15_CRYPT) |
| if( alg == PSA_ALG_RSA_PKCS1V15_CRYPT ) |
| { |
| status = mbedtls_to_psa_error( |
| mbedtls_rsa_pkcs1_decrypt( rsa, |
| mbedtls_ctr_drbg_random, |
| &global_data.ctr_drbg, |
| MBEDTLS_RSA_PRIVATE, |
| output_length, |
| input, |
| output, |
| output_size ) ); |
| } |
| else |
| #endif /* MBEDTLS_PSA_BUILTIN_ALG_RSA_PKCS1V15_CRYPT */ |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_OAEP) |
| if( PSA_ALG_IS_RSA_OAEP( alg ) ) |
| { |
| psa_rsa_oaep_set_padding_mode( alg, rsa ); |
| status = mbedtls_to_psa_error( |
| mbedtls_rsa_rsaes_oaep_decrypt( rsa, |
| mbedtls_ctr_drbg_random, |
| &global_data.ctr_drbg, |
| MBEDTLS_RSA_PRIVATE, |
| salt, salt_length, |
| output_length, |
| input, |
| output, |
| output_size ) ); |
| } |
| else |
| #endif /* MBEDTLS_PSA_BUILTIN_ALG_RSA_OAEP */ |
| { |
| status = PSA_ERROR_INVALID_ARGUMENT; |
| } |
| |
| rsa_exit: |
| mbedtls_rsa_free( rsa ); |
| mbedtls_free( rsa ); |
| } |
| else |
| #endif /* defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_PKCS1V15_CRYPT) || |
| * defined(MBEDTLS_PSA_BUILTIN_ALG_RSA_OAEP) */ |
| { |
| status = PSA_ERROR_NOT_SUPPORTED; |
| } |
| |
| exit: |
| unlock_status = psa_unlock_key_slot( slot ); |
| |
| return( ( status == PSA_SUCCESS ) ? unlock_status : status ); |
| } |
| |
| |
| |
| /****************************************************************/ |
| /* Symmetric cryptography */ |
| /****************************************************************/ |
| |
| static psa_status_t psa_cipher_setup( psa_cipher_operation_t *operation, |
| mbedtls_svc_key_id_t key, |
| psa_algorithm_t alg, |
| mbedtls_operation_t cipher_operation ) |
| { |
| psa_status_t status = PSA_ERROR_CORRUPTION_DETECTED; |
| psa_status_t unlock_status = PSA_ERROR_CORRUPTION_DETECTED; |
| int ret = 0; |
| psa_key_slot_t *slot; |
| size_t key_bits; |
| const mbedtls_cipher_info_t *cipher_info = NULL; |
| psa_key_usage_t usage = ( cipher_operation == MBEDTLS_ENCRYPT ? |
| PSA_KEY_USAGE_ENCRYPT : |
| PSA_KEY_USAGE_DECRYPT ); |
| |
| /* A context must be freshly initialized before it can be set up. */ |
| if( operation->alg != 0 ) |
| return( PSA_ERROR_BAD_STATE ); |
| |
| /* The requested algorithm must be one that can be processed by cipher. */ |
| if( ! PSA_ALG_IS_CIPHER( alg ) ) |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| |
| /* Fetch key material from key storage. */ |
| status = psa_get_and_lock_key_slot_with_policy( key, &slot, usage, alg ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| |
| /* Initialize the operation struct members, except for alg. The alg member |
| * is used to indicate to psa_cipher_abort that there are resources to free, |
| * so we only set it after resources have been allocated/initialized. */ |
| operation->key_set = 0; |
| operation->iv_set = 0; |
| operation->mbedtls_in_use = 0; |
| operation->iv_size = 0; |
| operation->block_size = 0; |
| if( alg == PSA_ALG_ECB_NO_PADDING ) |
| operation->iv_required = 0; |
| else |
| operation->iv_required = 1; |
| |
| /* Try doing the operation through a driver before using software fallback. */ |
| if( cipher_operation == MBEDTLS_ENCRYPT ) |
| status = psa_driver_wrapper_cipher_encrypt_setup( &operation->ctx.driver, |
| slot, |
| alg ); |
| else |
| status = psa_driver_wrapper_cipher_decrypt_setup( &operation->ctx.driver, |
| slot, |
| alg ); |
| |
| if( status == PSA_SUCCESS ) |
| { |
| /* Once the driver context is initialised, it needs to be freed using |
| * psa_cipher_abort. Indicate this through setting alg. */ |
| operation->alg = alg; |
| } |
| |
| if( status != PSA_ERROR_NOT_SUPPORTED || |
| psa_key_lifetime_is_external( slot->attr.lifetime ) ) |
| goto exit; |
| |
| /* Proceed with initializing an mbed TLS cipher context if no driver is |
| * available for the given algorithm & key. */ |
| mbedtls_cipher_init( &operation->ctx.cipher ); |
| |
| /* Once the cipher context is initialised, it needs to be freed using |
| * psa_cipher_abort. Indicate there is something to be freed through setting |
| * alg, and indicate the operation is being done using mbedtls crypto through |
| * setting mbedtls_in_use. */ |
| operation->alg = alg; |
| operation->mbedtls_in_use = 1; |
| |
| key_bits = psa_get_key_slot_bits( slot ); |
| cipher_info = mbedtls_cipher_info_from_psa( alg, slot->attr.type, key_bits, NULL ); |
| if( cipher_info == NULL ) |
| { |
| status = PSA_ERROR_NOT_SUPPORTED; |
| goto exit; |
| } |
| |
| ret = mbedtls_cipher_setup( &operation->ctx.cipher, cipher_info ); |
| if( ret != 0 ) |
| goto exit; |
| |
| #if defined(MBEDTLS_DES_C) |
| if( slot->attr.type == PSA_KEY_TYPE_DES && key_bits == 128 ) |
| { |
| /* Two-key Triple-DES is 3-key Triple-DES with K1=K3 */ |
| uint8_t keys[24]; |
| memcpy( keys, slot->data.key.data, 16 ); |
| memcpy( keys + 16, slot->data.key.data, 8 ); |
| ret = mbedtls_cipher_setkey( &operation->ctx.cipher, |
| keys, |
| 192, cipher_operation ); |
| } |
| else |
| #endif |
| { |
| ret = mbedtls_cipher_setkey( &operation->ctx.cipher, |
| slot->data.key.data, |
| (int) key_bits, cipher_operation ); |
| } |
| if( ret != 0 ) |
| goto exit; |
| |
| #if defined(MBEDTLS_CIPHER_MODE_WITH_PADDING) |
| switch( alg ) |
| { |
| case PSA_ALG_CBC_NO_PADDING: |
| ret = mbedtls_cipher_set_padding_mode( &operation->ctx.cipher, |
| MBEDTLS_PADDING_NONE ); |
| break; |
| case PSA_ALG_CBC_PKCS7: |
| ret = mbedtls_cipher_set_padding_mode( &operation->ctx.cipher, |
| MBEDTLS_PADDING_PKCS7 ); |
| break; |
| default: |
| /* The algorithm doesn't involve padding. */ |
| ret = 0; |
| break; |
| } |
| if( ret != 0 ) |
| goto exit; |
| #endif //MBEDTLS_CIPHER_MODE_WITH_PADDING |
| |
| operation->block_size = ( PSA_ALG_IS_STREAM_CIPHER( alg ) ? 1 : |
| PSA_BLOCK_CIPHER_BLOCK_SIZE( slot->attr.type ) ); |
| if( ( alg & PSA_ALG_CIPHER_FROM_BLOCK_FLAG ) != 0 && |
| alg != PSA_ALG_ECB_NO_PADDING ) |
| { |
| operation->iv_size = PSA_BLOCK_CIPHER_BLOCK_SIZE( slot->attr.type ); |
| } |
| #if defined(MBEDTLS_CHACHA20_C) |
| else |
| if( alg == PSA_ALG_CHACHA20 ) |
| operation->iv_size = 12; |
| #endif |
| |
| status = PSA_SUCCESS; |
| |
| exit: |
| if( ret != 0 ) |
| status = mbedtls_to_psa_error( ret ); |
| if( status == PSA_SUCCESS ) |
| { |
| /* Update operation flags for both driver and software implementations */ |
| operation->key_set = 1; |
| } |
| else |
| psa_cipher_abort( operation ); |
| |
| unlock_status = psa_unlock_key_slot( slot ); |
| |
| return( ( status == PSA_SUCCESS ) ? unlock_status : status ); |
| } |
| |
| psa_status_t psa_cipher_encrypt_setup( psa_cipher_operation_t *operation, |
| mbedtls_svc_key_id_t key, |
| psa_algorithm_t alg ) |
| { |
| return( psa_cipher_setup( operation, key, alg, MBEDTLS_ENCRYPT ) ); |
| } |
| |
| psa_status_t psa_cipher_decrypt_setup( psa_cipher_operation_t *operation, |
| mbedtls_svc_key_id_t key, |
| psa_algorithm_t alg ) |
| { |
| return( psa_cipher_setup( operation, key, alg, MBEDTLS_DECRYPT ) ); |
| } |
| |
| psa_status_t psa_cipher_generate_iv( psa_cipher_operation_t *operation, |
| uint8_t *iv, |
| size_t iv_size, |
| size_t *iv_length ) |
| { |
| psa_status_t status; |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; |
| if( operation->iv_set || ! operation->iv_required ) |
| { |
| return( PSA_ERROR_BAD_STATE ); |
| } |
| |
| if( operation->mbedtls_in_use == 0 ) |
| { |
| status = psa_driver_wrapper_cipher_generate_iv( &operation->ctx.driver, |
| iv, |
| iv_size, |
| iv_length ); |
| goto exit; |
| } |
| |
| if( iv_size < operation->iv_size ) |
| { |
| status = PSA_ERROR_BUFFER_TOO_SMALL; |
| goto exit; |
| } |
| ret = mbedtls_ctr_drbg_random( &global_data.ctr_drbg, |
| iv, operation->iv_size ); |
| if( ret != 0 ) |
| { |
| status = mbedtls_to_psa_error( ret ); |
| goto exit; |
| } |
| |
| *iv_length = operation->iv_size; |
| status = psa_cipher_set_iv( operation, iv, *iv_length ); |
| |
| exit: |
| if( status == PSA_SUCCESS ) |
| operation->iv_set = 1; |
| else |
| psa_cipher_abort( operation ); |
| return( status ); |
| } |
| |
| psa_status_t psa_cipher_set_iv( psa_cipher_operation_t *operation, |
| const uint8_t *iv, |
| size_t iv_length ) |
| { |
| psa_status_t status; |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; |
| if( operation->iv_set || ! operation->iv_required ) |
| { |
| return( PSA_ERROR_BAD_STATE ); |
| } |
| |
| if( operation->mbedtls_in_use == 0 ) |
| { |
| status = psa_driver_wrapper_cipher_set_iv( &operation->ctx.driver, |
| iv, |
| iv_length ); |
| goto exit; |
| } |
| |
| if( iv_length != operation->iv_size ) |
| { |
| status = PSA_ERROR_INVALID_ARGUMENT; |
| goto exit; |
| } |
| ret = mbedtls_cipher_set_iv( &operation->ctx.cipher, iv, iv_length ); |
| status = mbedtls_to_psa_error( ret ); |
| exit: |
| if( status == PSA_SUCCESS ) |
| operation->iv_set = 1; |
| else |
| psa_cipher_abort( operation ); |
| return( status ); |
| } |
| |
| /* Process input for which the algorithm is set to ECB mode. This requires |
| * manual processing, since the PSA API is defined as being able to process |
| * arbitrary-length calls to psa_cipher_update() with ECB mode, but the |
| * underlying mbedtls_cipher_update only takes full blocks. */ |
| static psa_status_t psa_cipher_update_ecb_internal( |
| mbedtls_cipher_context_t *ctx, |
| const uint8_t *input, |
| size_t input_length, |
| uint8_t *output, |
| size_t output_size, |
| size_t *output_length ) |
| { |
| psa_status_t status = PSA_ERROR_CORRUPTION_DETECTED; |
| size_t block_size = ctx->cipher_info->block_size; |
| size_t internal_output_length = 0; |
| *output_length = 0; |
| |
| if( input_length == 0 ) |
| { |
| status = PSA_SUCCESS; |
| goto exit; |
| } |
| |
| if( ctx->unprocessed_len > 0 ) |
| { |
| /* Fill up to block size, and run the block if there's a full one. */ |
| size_t bytes_to_copy = block_size - ctx->unprocessed_len; |
| |
| if( input_length < bytes_to_copy ) |
| bytes_to_copy = input_length; |
| |
| memcpy( &( ctx->unprocessed_data[ctx->unprocessed_len] ), |
| input, bytes_to_copy ); |
| input_length -= bytes_to_copy; |
| input += bytes_to_copy; |
| ctx->unprocessed_len += bytes_to_copy; |
| |
| if( ctx->unprocessed_len == block_size ) |
| { |
| status = mbedtls_to_psa_error( |
| mbedtls_cipher_update( ctx, |
| ctx->unprocessed_data, |
| block_size, |
| output, &internal_output_length ) ); |
| |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| |
| output += internal_output_length; |
| output_size -= internal_output_length; |
| *output_length += internal_output_length; |
| ctx->unprocessed_len = 0; |
| } |
| } |
| |
| while( input_length >= block_size ) |
| { |
| /* Run all full blocks we have, one by one */ |
| status = mbedtls_to_psa_error( |
| mbedtls_cipher_update( ctx, input, |
| block_size, |
| output, &internal_output_length ) ); |
| |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| |
| input_length -= block_size; |
| input += block_size; |
| |
| output += internal_output_length; |
| output_size -= internal_output_length; |
| *output_length += internal_output_length; |
| } |
| |
| if( input_length > 0 ) |
| { |
| /* Save unprocessed bytes for later processing */ |
| memcpy( &( ctx->unprocessed_data[ctx->unprocessed_len] ), |
| input, input_length ); |
| ctx->unprocessed_len += input_length; |
| } |
| |
| status = PSA_SUCCESS; |
| |
| exit: |
| return( status ); |
| } |
| |
| psa_status_t psa_cipher_update( psa_cipher_operation_t *operation, |
| const uint8_t *input, |
| size_t input_length, |
| uint8_t *output, |
| size_t output_size, |
| size_t *output_length ) |
| { |
| psa_status_t status = PSA_ERROR_CORRUPTION_DETECTED; |
| size_t expected_output_size; |
| if( operation->alg == 0 ) |
| { |
| return( PSA_ERROR_BAD_STATE ); |
| } |
| if( operation->iv_required && ! operation->iv_set ) |
| { |
| return( PSA_ERROR_BAD_STATE ); |
| } |
| |
| if( operation->mbedtls_in_use == 0 ) |
| { |
| status = psa_driver_wrapper_cipher_update( &operation->ctx.driver, |
| input, |
| input_length, |
| output, |
| output_size, |
| output_length ); |
| goto exit; |
| } |
| |
| if( ! PSA_ALG_IS_STREAM_CIPHER( operation->alg ) ) |
| { |
| /* Take the unprocessed partial block left over from previous |
| * update calls, if any, plus the input to this call. Remove |
| * the last partial block, if any. You get the data that will be |
| * output in this call. */ |
| expected_output_size = |
| ( operation->ctx.cipher.unprocessed_len + input_length ) |
| / operation->block_size * operation->block_size; |
| } |
| else |
| { |
| expected_output_size = input_length; |
| } |
| |
| if( output_size < expected_output_size ) |
| { |
| status = PSA_ERROR_BUFFER_TOO_SMALL; |
| goto exit; |
| } |
| |
| if( operation->alg == PSA_ALG_ECB_NO_PADDING ) |
| { |
| /* mbedtls_cipher_update has an API inconsistency: it will only |
| * process a single block at a time in ECB mode. Abstract away that |
| * inconsistency here to match the PSA API behaviour. */ |
| status = psa_cipher_update_ecb_internal( &operation->ctx.cipher, |
| input, |
| input_length, |
| output, |
| output_size, |
| output_length ); |
| } |
| else |
| { |
| status = mbedtls_to_psa_error( |
| mbedtls_cipher_update( &operation->ctx.cipher, input, |
| input_length, output, output_length ) ); |
| } |
| exit: |
| if( status != PSA_SUCCESS ) |
| psa_cipher_abort( operation ); |
| return( status ); |
| } |
| |
| psa_status_t psa_cipher_finish( psa_cipher_operation_t *operation, |
| uint8_t *output, |
| size_t output_size, |
| size_t *output_length ) |
| { |
| psa_status_t status = PSA_ERROR_GENERIC_ERROR; |
| uint8_t temp_output_buffer[MBEDTLS_MAX_BLOCK_LENGTH]; |
| if( operation->alg == 0 ) |
| { |
| return( PSA_ERROR_BAD_STATE ); |
| } |
| if( operation->iv_required && ! operation->iv_set ) |
| { |
| return( PSA_ERROR_BAD_STATE ); |
| } |
| |
| if( operation->mbedtls_in_use == 0 ) |
| { |
| status = psa_driver_wrapper_cipher_finish( &operation->ctx.driver, |
| output, |
| output_size, |
| output_length ); |
| goto exit; |
| } |
| |
| if( operation->ctx.cipher.unprocessed_len != 0 ) |
| { |
| if( operation->alg == PSA_ALG_ECB_NO_PADDING || |
| operation->alg == PSA_ALG_CBC_NO_PADDING ) |
| { |
| status = PSA_ERROR_INVALID_ARGUMENT; |
| goto exit; |
| } |
| } |
| |
| status = mbedtls_to_psa_error( |
| mbedtls_cipher_finish( &operation->ctx.cipher, |
| temp_output_buffer, |
| output_length ) ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| |
| if( *output_length == 0 ) |
| ; /* Nothing to copy. Note that output may be NULL in this case. */ |
| else if( output_size >= *output_length ) |
| memcpy( output, temp_output_buffer, *output_length ); |
| else |
| status = PSA_ERROR_BUFFER_TOO_SMALL; |
| |
| exit: |
| if( operation->mbedtls_in_use == 1 ) |
| mbedtls_platform_zeroize( temp_output_buffer, sizeof( temp_output_buffer ) ); |
| |
| if( status == PSA_SUCCESS ) |
| return( psa_cipher_abort( operation ) ); |
| else |
| { |
| *output_length = 0; |
| (void) psa_cipher_abort( operation ); |
| |
| return( status ); |
| } |
| } |
| |
| psa_status_t psa_cipher_abort( psa_cipher_operation_t *operation ) |
| { |
| if( operation->alg == 0 ) |
| { |
| /* The object has (apparently) been initialized but it is not (yet) |
| * in use. It's ok to call abort on such an object, and there's |
| * nothing to do. */ |
| return( PSA_SUCCESS ); |
| } |
| |
| /* Sanity check (shouldn't happen: operation->alg should |
| * always have been initialized to a valid value). */ |
| if( ! PSA_ALG_IS_CIPHER( operation->alg ) ) |
| return( PSA_ERROR_BAD_STATE ); |
| |
| if( operation->mbedtls_in_use == 0 ) |
| psa_driver_wrapper_cipher_abort( &operation->ctx.driver ); |
| else |
| mbedtls_cipher_free( &operation->ctx.cipher ); |
| |
| operation->alg = 0; |
| operation->key_set = 0; |
| operation->iv_set = 0; |
| operation->mbedtls_in_use = 0; |
| operation->iv_size = 0; |
| operation->block_size = 0; |
| operation->iv_required = 0; |
| |
| return( PSA_SUCCESS ); |
| } |
| |
| |
| |
| |
| /****************************************************************/ |
| /* AEAD */ |
| /****************************************************************/ |
| |
| typedef struct |
| { |
| psa_key_slot_t *slot; |
| const mbedtls_cipher_info_t *cipher_info; |
| union |
| { |
| unsigned dummy; /* Make the union non-empty even with no supported algorithms. */ |
| #if defined(MBEDTLS_CCM_C) |
| mbedtls_ccm_context ccm; |
| #endif /* MBEDTLS_CCM_C */ |
| #if defined(MBEDTLS_GCM_C) |
| mbedtls_gcm_context gcm; |
| #endif /* MBEDTLS_GCM_C */ |
| #if defined(MBEDTLS_CHACHAPOLY_C) |
| mbedtls_chachapoly_context chachapoly; |
| #endif /* MBEDTLS_CHACHAPOLY_C */ |
| } ctx; |
| psa_algorithm_t core_alg; |
| uint8_t full_tag_length; |
| uint8_t tag_length; |
| } aead_operation_t; |
| |
| #define AEAD_OPERATION_INIT {0, 0, {0}, 0, 0, 0} |
| |
| static void psa_aead_abort_internal( aead_operation_t *operation ) |
| { |
| switch( operation->core_alg ) |
| { |
| #if defined(MBEDTLS_CCM_C) |
| case PSA_ALG_CCM: |
| mbedtls_ccm_free( &operation->ctx.ccm ); |
| break; |
| #endif /* MBEDTLS_CCM_C */ |
| #if defined(MBEDTLS_GCM_C) |
| case PSA_ALG_GCM: |
| mbedtls_gcm_free( &operation->ctx.gcm ); |
| break; |
| #endif /* MBEDTLS_GCM_C */ |
| } |
| |
| psa_unlock_key_slot( operation->slot ); |
| } |
| |
| static psa_status_t psa_aead_setup( aead_operation_t *operation, |
| mbedtls_svc_key_id_t key, |
| psa_key_usage_t usage, |
| psa_algorithm_t alg ) |
| { |
| psa_status_t status; |
| size_t key_bits; |
| mbedtls_cipher_id_t cipher_id; |
| |
| status = psa_get_and_lock_transparent_key_slot_with_policy( |
| key, &operation->slot, usage, alg ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| |
| key_bits = psa_get_key_slot_bits( operation->slot ); |
| |
| operation->cipher_info = |
| mbedtls_cipher_info_from_psa( alg, operation->slot->attr.type, key_bits, |
| &cipher_id ); |
| if( operation->cipher_info == NULL ) |
| { |
| status = PSA_ERROR_NOT_SUPPORTED; |
| goto cleanup; |
| } |
| |
| switch( PSA_ALG_AEAD_WITH_TAG_LENGTH( alg, 0 ) ) |
| { |
| #if defined(MBEDTLS_CCM_C) |
| case PSA_ALG_AEAD_WITH_TAG_LENGTH( PSA_ALG_CCM, 0 ): |
| operation->core_alg = PSA_ALG_CCM; |
| operation->full_tag_length = 16; |
| /* CCM allows the following tag lengths: 4, 6, 8, 10, 12, 14, 16. |
| * The call to mbedtls_ccm_encrypt_and_tag or |
| * mbedtls_ccm_auth_decrypt will validate the tag length. */ |
| if( PSA_BLOCK_CIPHER_BLOCK_SIZE( operation->slot->attr.type ) != 16 ) |
| { |
| status = PSA_ERROR_INVALID_ARGUMENT; |
| goto cleanup; |
| } |
| mbedtls_ccm_init( &operation->ctx.ccm ); |
| status = mbedtls_to_psa_error( |
| mbedtls_ccm_setkey( &operation->ctx.ccm, cipher_id, |
| operation->slot->data.key.data, |
| (unsigned int) key_bits ) ); |
| if( status != 0 ) |
| goto cleanup; |
| break; |
| #endif /* MBEDTLS_CCM_C */ |
| |
| #if defined(MBEDTLS_GCM_C) |
| case PSA_ALG_AEAD_WITH_TAG_LENGTH( PSA_ALG_GCM, 0 ): |
| operation->core_alg = PSA_ALG_GCM; |
| operation->full_tag_length = 16; |
| /* GCM allows the following tag lengths: 4, 8, 12, 13, 14, 15, 16. |
| * The call to mbedtls_gcm_crypt_and_tag or |
| * mbedtls_gcm_auth_decrypt will validate the tag length. */ |
| if( PSA_BLOCK_CIPHER_BLOCK_SIZE( operation->slot->attr.type ) != 16 ) |
| { |
| status = PSA_ERROR_INVALID_ARGUMENT; |
| goto cleanup; |
| } |
| mbedtls_gcm_init( &operation->ctx.gcm ); |
| status = mbedtls_to_psa_error( |
| mbedtls_gcm_setkey( &operation->ctx.gcm, cipher_id, |
| operation->slot->data.key.data, |
| (unsigned int) key_bits ) ); |
| if( status != 0 ) |
| goto cleanup; |
| break; |
| #endif /* MBEDTLS_GCM_C */ |
| |
| #if defined(MBEDTLS_CHACHAPOLY_C) |
| case PSA_ALG_AEAD_WITH_TAG_LENGTH( PSA_ALG_CHACHA20_POLY1305, 0 ): |
| operation->core_alg = PSA_ALG_CHACHA20_POLY1305; |
| operation->full_tag_length = 16; |
| /* We only support the default tag length. */ |
| if( alg != PSA_ALG_CHACHA20_POLY1305 ) |
| { |
| status = PSA_ERROR_NOT_SUPPORTED; |
| goto cleanup; |
| } |
| mbedtls_chachapoly_init( &operation->ctx.chachapoly ); |
| status = mbedtls_to_psa_error( |
| mbedtls_chachapoly_setkey( &operation->ctx.chachapoly, |
| operation->slot->data.key.data ) ); |
| if( status != 0 ) |
| goto cleanup; |
| break; |
| #endif /* MBEDTLS_CHACHAPOLY_C */ |
| |
| default: |
| status = PSA_ERROR_NOT_SUPPORTED; |
| goto cleanup; |
| } |
| |
| if( PSA_AEAD_TAG_LENGTH( alg ) > operation->full_tag_length ) |
| { |
| status = PSA_ERROR_INVALID_ARGUMENT; |
| goto cleanup; |
| } |
| operation->tag_length = PSA_AEAD_TAG_LENGTH( alg ); |
| |
| return( PSA_SUCCESS ); |
| |
| cleanup: |
| psa_aead_abort_internal( operation ); |
| return( status ); |
| } |
| |
| psa_status_t psa_aead_encrypt( mbedtls_svc_key_id_t key, |
| psa_algorithm_t alg, |
| const uint8_t *nonce, |
| size_t nonce_length, |
| const uint8_t *additional_data, |
| size_t additional_data_length, |
| const uint8_t *plaintext, |
| size_t plaintext_length, |
| uint8_t *ciphertext, |
| size_t ciphertext_size, |
| size_t *ciphertext_length ) |
| { |
| psa_status_t status; |
| aead_operation_t operation = AEAD_OPERATION_INIT; |
| uint8_t *tag; |
| |
| *ciphertext_length = 0; |
| |
| status = psa_aead_setup( &operation, key, PSA_KEY_USAGE_ENCRYPT, alg ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| |
| /* For all currently supported modes, the tag is at the end of the |
| * ciphertext. */ |
| if( ciphertext_size < ( plaintext_length + operation.tag_length ) ) |
| { |
| status = PSA_ERROR_BUFFER_TOO_SMALL; |
| goto exit; |
| } |
| tag = ciphertext + plaintext_length; |
| |
| #if defined(MBEDTLS_GCM_C) |
| if( operation.core_alg == PSA_ALG_GCM ) |
| { |
| status = mbedtls_to_psa_error( |
| mbedtls_gcm_crypt_and_tag( &operation.ctx.gcm, |
| MBEDTLS_GCM_ENCRYPT, |
| plaintext_length, |
| nonce, nonce_length, |
| additional_data, additional_data_length, |
| plaintext, ciphertext, |
| operation.tag_length, tag ) ); |
| } |
| else |
| #endif /* MBEDTLS_GCM_C */ |
| #if defined(MBEDTLS_CCM_C) |
| if( operation.core_alg == PSA_ALG_CCM ) |
| { |
| status = mbedtls_to_psa_error( |
| mbedtls_ccm_encrypt_and_tag( &operation.ctx.ccm, |
| plaintext_length, |
| nonce, nonce_length, |
| additional_data, |
| additional_data_length, |
| plaintext, ciphertext, |
| tag, operation.tag_length ) ); |
| } |
| else |
| #endif /* MBEDTLS_CCM_C */ |
| #if defined(MBEDTLS_CHACHAPOLY_C) |
| if( operation.core_alg == PSA_ALG_CHACHA20_POLY1305 ) |
| { |
| if( nonce_length != 12 || operation.tag_length != 16 ) |
| { |
| status = PSA_ERROR_NOT_SUPPORTED; |
| goto exit; |
| } |
| status = mbedtls_to_psa_error( |
| mbedtls_chachapoly_encrypt_and_tag( &operation.ctx.chachapoly, |
| plaintext_length, |
| nonce, |
| additional_data, |
| additional_data_length, |
| plaintext, |
| ciphertext, |
| tag ) ); |
| } |
| else |
| #endif /* MBEDTLS_CHACHAPOLY_C */ |
| { |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| } |
| |
| if( status != PSA_SUCCESS && ciphertext_size != 0 ) |
| memset( ciphertext, 0, ciphertext_size ); |
| |
| exit: |
| psa_aead_abort_internal( &operation ); |
| if( status == PSA_SUCCESS ) |
| *ciphertext_length = plaintext_length + operation.tag_length; |
| return( status ); |
| } |
| |
| /* Locate the tag in a ciphertext buffer containing the encrypted data |
| * followed by the tag. Return the length of the part preceding the tag in |
| * *plaintext_length. This is the size of the plaintext in modes where |
| * the encrypted data has the same size as the plaintext, such as |
| * CCM and GCM. */ |
| static psa_status_t psa_aead_unpadded_locate_tag( size_t tag_length, |
| const uint8_t *ciphertext, |
| size_t ciphertext_length, |
| size_t plaintext_size, |
| const uint8_t **p_tag ) |
| { |
| size_t payload_length; |
| if( tag_length > ciphertext_length ) |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| payload_length = ciphertext_length - tag_length; |
| if( payload_length > plaintext_size ) |
| return( PSA_ERROR_BUFFER_TOO_SMALL ); |
| *p_tag = ciphertext + payload_length; |
| return( PSA_SUCCESS ); |
| } |
| |
| psa_status_t psa_aead_decrypt( mbedtls_svc_key_id_t key, |
| psa_algorithm_t alg, |
| const uint8_t *nonce, |
| size_t nonce_length, |
| const uint8_t *additional_data, |
| size_t additional_data_length, |
| const uint8_t *ciphertext, |
| size_t ciphertext_length, |
| uint8_t *plaintext, |
| size_t plaintext_size, |
| size_t *plaintext_length ) |
| { |
| psa_status_t status; |
| aead_operation_t operation = AEAD_OPERATION_INIT; |
| const uint8_t *tag = NULL; |
| |
| *plaintext_length = 0; |
| |
| status = psa_aead_setup( &operation, key, PSA_KEY_USAGE_DECRYPT, alg ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| |
| status = psa_aead_unpadded_locate_tag( operation.tag_length, |
| ciphertext, ciphertext_length, |
| plaintext_size, &tag ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| |
| #if defined(MBEDTLS_GCM_C) |
| if( operation.core_alg == PSA_ALG_GCM ) |
| { |
| status = mbedtls_to_psa_error( |
| mbedtls_gcm_auth_decrypt( &operation.ctx.gcm, |
| ciphertext_length - operation.tag_length, |
| nonce, nonce_length, |
| additional_data, |
| additional_data_length, |
| tag, operation.tag_length, |
| ciphertext, plaintext ) ); |
| } |
| else |
| #endif /* MBEDTLS_GCM_C */ |
| #if defined(MBEDTLS_CCM_C) |
| if( operation.core_alg == PSA_ALG_CCM ) |
| { |
| status = mbedtls_to_psa_error( |
| mbedtls_ccm_auth_decrypt( &operation.ctx.ccm, |
| ciphertext_length - operation.tag_length, |
| nonce, nonce_length, |
| additional_data, |
| additional_data_length, |
| ciphertext, plaintext, |
| tag, operation.tag_length ) ); |
| } |
| else |
| #endif /* MBEDTLS_CCM_C */ |
| #if defined(MBEDTLS_CHACHAPOLY_C) |
| if( operation.core_alg == PSA_ALG_CHACHA20_POLY1305 ) |
| { |
| if( nonce_length != 12 || operation.tag_length != 16 ) |
| { |
| status = PSA_ERROR_NOT_SUPPORTED; |
| goto exit; |
| } |
| status = mbedtls_to_psa_error( |
| mbedtls_chachapoly_auth_decrypt( &operation.ctx.chachapoly, |
| ciphertext_length - operation.tag_length, |
| nonce, |
| additional_data, |
| additional_data_length, |
| tag, |
| ciphertext, |
| plaintext ) ); |
| } |
| else |
| #endif /* MBEDTLS_CHACHAPOLY_C */ |
| { |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| } |
| |
| if( status != PSA_SUCCESS && plaintext_size != 0 ) |
| memset( plaintext, 0, plaintext_size ); |
| |
| exit: |
| psa_aead_abort_internal( &operation ); |
| if( status == PSA_SUCCESS ) |
| *plaintext_length = ciphertext_length - operation.tag_length; |
| return( status ); |
| } |
| |
| |
| |
| /****************************************************************/ |
| /* Generators */ |
| /****************************************************************/ |
| |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_HKDF) || \ |
| defined(MBEDTLS_PSA_BUILTIN_ALG_TLS12_PRF) || \ |
| defined(MBEDTLS_PSA_BUILTIN_ALG_TLS12_PSK_TO_MS) |
| #define AT_LEAST_ONE_BUILTIN_KDF |
| #endif |
| |
| #define HKDF_STATE_INIT 0 /* no input yet */ |
| #define HKDF_STATE_STARTED 1 /* got salt */ |
| #define HKDF_STATE_KEYED 2 /* got key */ |
| #define HKDF_STATE_OUTPUT 3 /* output started */ |
| |
| static psa_algorithm_t psa_key_derivation_get_kdf_alg( |
| const psa_key_derivation_operation_t *operation ) |
| { |
| if ( PSA_ALG_IS_KEY_AGREEMENT( operation->alg ) ) |
| return( PSA_ALG_KEY_AGREEMENT_GET_KDF( operation->alg ) ); |
| else |
| return( operation->alg ); |
| } |
| |
| psa_status_t psa_key_derivation_abort( psa_key_derivation_operation_t *operation ) |
| { |
| psa_status_t status = PSA_SUCCESS; |
| psa_algorithm_t kdf_alg = psa_key_derivation_get_kdf_alg( operation ); |
| if( kdf_alg == 0 ) |
| { |
| /* The object has (apparently) been initialized but it is not |
| * in use. It's ok to call abort on such an object, and there's |
| * nothing to do. */ |
| } |
| else |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_HKDF) |
| if( PSA_ALG_IS_HKDF( kdf_alg ) ) |
| { |
| mbedtls_free( operation->ctx.hkdf.info ); |
| status = psa_hmac_abort_internal( &operation->ctx.hkdf.hmac ); |
| } |
| else |
| #endif /* defined(MBEDTLS_PSA_BUILTIN_ALG_HKDF */ |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_TLS12_PRF) || \ |
| defined(MBEDTLS_PSA_BUILTIN_ALG_TLS12_PSK_TO_MS) |
| if( PSA_ALG_IS_TLS12_PRF( kdf_alg ) || |
| /* TLS-1.2 PSK-to-MS KDF uses the same core as TLS-1.2 PRF */ |
| PSA_ALG_IS_TLS12_PSK_TO_MS( kdf_alg ) ) |
| { |
| if( operation->ctx.tls12_prf.seed != NULL ) |
| { |
| mbedtls_platform_zeroize( operation->ctx.tls12_prf.seed, |
| operation->ctx.tls12_prf.seed_length ); |
| mbedtls_free( operation->ctx.tls12_prf.seed ); |
| } |
| |
| if( operation->ctx.tls12_prf.label != NULL ) |
| { |
| mbedtls_platform_zeroize( operation->ctx.tls12_prf.label, |
| operation->ctx.tls12_prf.label_length ); |
| mbedtls_free( operation->ctx.tls12_prf.label ); |
| } |
| |
| status = psa_hmac_abort_internal( &operation->ctx.tls12_prf.hmac ); |
| |
| /* We leave the fields Ai and output_block to be erased safely by the |
| * mbedtls_platform_zeroize() in the end of this function. */ |
| } |
| else |
| #endif /* defined(MBEDTLS_PSA_BUILTIN_ALG_TLS12_PRF) || |
| * defined(MBEDTLS_PSA_BUILTIN_ALG_TLS12_PSK_TO_MS) */ |
| { |
| status = PSA_ERROR_BAD_STATE; |
| } |
| mbedtls_platform_zeroize( operation, sizeof( *operation ) ); |
| return( status ); |
| } |
| |
| psa_status_t psa_key_derivation_get_capacity(const psa_key_derivation_operation_t *operation, |
| size_t *capacity) |
| { |
| if( operation->alg == 0 ) |
| { |
| /* This is a blank key derivation operation. */ |
| return( PSA_ERROR_BAD_STATE ); |
| } |
| |
| *capacity = operation->capacity; |
| return( PSA_SUCCESS ); |
| } |
| |
| psa_status_t psa_key_derivation_set_capacity( psa_key_derivation_operation_t *operation, |
| size_t capacity ) |
| { |
| if( operation->alg == 0 ) |
| return( PSA_ERROR_BAD_STATE ); |
| if( capacity > operation->capacity ) |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| operation->capacity = capacity; |
| return( PSA_SUCCESS ); |
| } |
| |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_HKDF) |
| /* Read some bytes from an HKDF-based operation. This performs a chunk |
| * of the expand phase of the HKDF algorithm. */ |
| static psa_status_t psa_key_derivation_hkdf_read( psa_hkdf_key_derivation_t *hkdf, |
| psa_algorithm_t hash_alg, |
| uint8_t *output, |
| size_t output_length ) |
| { |
| uint8_t hash_length = PSA_HASH_SIZE( hash_alg ); |
| psa_status_t status; |
| |
| if( hkdf->state < HKDF_STATE_KEYED || ! hkdf->info_set ) |
| return( PSA_ERROR_BAD_STATE ); |
| hkdf->state = HKDF_STATE_OUTPUT; |
| |
| while( output_length != 0 ) |
| { |
| /* Copy what remains of the current block */ |
| uint8_t n = hash_length - hkdf->offset_in_block; |
| if( n > output_length ) |
| n = (uint8_t) output_length; |
| memcpy( output, hkdf->output_block + hkdf->offset_in_block, n ); |
| output += n; |
| output_length -= n; |
| hkdf->offset_in_block += n; |
| if( output_length == 0 ) |
| break; |
| /* We can't be wanting more output after block 0xff, otherwise |
| * the capacity check in psa_key_derivation_output_bytes() would have |
| * prevented this call. It could happen only if the operation |
| * object was corrupted or if this function is called directly |
| * inside the library. */ |
| if( hkdf->block_number == 0xff ) |
| return( PSA_ERROR_BAD_STATE ); |
| |
| /* We need a new block */ |
| ++hkdf->block_number; |
| hkdf->offset_in_block = 0; |
| status = psa_hmac_setup_internal( &hkdf->hmac, |
| hkdf->prk, hash_length, |
| hash_alg ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| if( hkdf->block_number != 1 ) |
| { |
| status = psa_hash_update( &hkdf->hmac.hash_ctx, |
| hkdf->output_block, |
| hash_length ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| } |
| status = psa_hash_update( &hkdf->hmac.hash_ctx, |
| hkdf->info, |
| hkdf->info_length ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| status = psa_hash_update( &hkdf->hmac.hash_ctx, |
| &hkdf->block_number, 1 ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| status = psa_hmac_finish_internal( &hkdf->hmac, |
| hkdf->output_block, |
| sizeof( hkdf->output_block ) ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| } |
| |
| return( PSA_SUCCESS ); |
| } |
| #endif /* MBEDTLS_PSA_BUILTIN_ALG_HKDF */ |
| |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_TLS12_PRF) || \ |
| defined(MBEDTLS_PSA_BUILTIN_ALG_TLS12_PSK_TO_MS) |
| static psa_status_t psa_key_derivation_tls12_prf_generate_next_block( |
| psa_tls12_prf_key_derivation_t *tls12_prf, |
| psa_algorithm_t alg ) |
| { |
| psa_algorithm_t hash_alg = PSA_ALG_HKDF_GET_HASH( alg ); |
| uint8_t hash_length = PSA_HASH_SIZE( hash_alg ); |
| psa_hash_operation_t backup = PSA_HASH_OPERATION_INIT; |
| psa_status_t status, cleanup_status; |
| |
| /* We can't be wanting more output after block 0xff, otherwise |
| * the capacity check in psa_key_derivation_output_bytes() would have |
| * prevented this call. It could happen only if the operation |
| * object was corrupted or if this function is called directly |
| * inside the library. */ |
| if( tls12_prf->block_number == 0xff ) |
| return( PSA_ERROR_CORRUPTION_DETECTED ); |
| |
| /* We need a new block */ |
| ++tls12_prf->block_number; |
| tls12_prf->left_in_block = hash_length; |
| |
| /* Recall the definition of the TLS-1.2-PRF from RFC 5246: |
| * |
| * PRF(secret, label, seed) = P_<hash>(secret, label + seed) |
| * |
| * P_hash(secret, seed) = HMAC_hash(secret, A(1) + seed) + |
| * HMAC_hash(secret, A(2) + seed) + |
| * HMAC_hash(secret, A(3) + seed) + ... |
| * |
| * A(0) = seed |
| * A(i) = HMAC_hash(secret, A(i-1)) |
| * |
| * The `psa_tls12_prf_key_derivation` structure saves the block |
| * `HMAC_hash(secret, A(i) + seed)` from which the output |
| * is currently extracted as `output_block` and where i is |
| * `block_number`. |
| */ |
| |
| /* Save the hash context before using it, to preserve the hash state with |
| * only the inner padding in it. We need this, because inner padding depends |
| * on the key (secret in the RFC's terminology). */ |
| status = psa_hash_clone( &tls12_prf->hmac.hash_ctx, &backup ); |
| if( status != PSA_SUCCESS ) |
| goto cleanup; |
| |
| /* Calculate A(i) where i = tls12_prf->block_number. */ |
| if( tls12_prf->block_number == 1 ) |
| { |
| /* A(1) = HMAC_hash(secret, A(0)), where A(0) = seed. (The RFC overloads |
| * the variable seed and in this instance means it in the context of the |
| * P_hash function, where seed = label + seed.) */ |
| status = psa_hash_update( &tls12_prf->hmac.hash_ctx, |
| tls12_prf->label, tls12_prf->label_length ); |
| if( status != PSA_SUCCESS ) |
| goto cleanup; |
| status = psa_hash_update( &tls12_prf->hmac.hash_ctx, |
| tls12_prf->seed, tls12_prf->seed_length ); |
| if( status != PSA_SUCCESS ) |
| goto cleanup; |
| } |
| else |
| { |
| /* A(i) = HMAC_hash(secret, A(i-1)) */ |
| status = psa_hash_update( &tls12_prf->hmac.hash_ctx, |
| tls12_prf->Ai, hash_length ); |
| if( status != PSA_SUCCESS ) |
| goto cleanup; |
| } |
| |
| status = psa_hmac_finish_internal( &tls12_prf->hmac, |
| tls12_prf->Ai, hash_length ); |
| if( status != PSA_SUCCESS ) |
| goto cleanup; |
| status = psa_hash_clone( &backup, &tls12_prf->hmac.hash_ctx ); |
| if( status != PSA_SUCCESS ) |
| goto cleanup; |
| |
| /* Calculate HMAC_hash(secret, A(i) + label + seed). */ |
| status = psa_hash_update( &tls12_prf->hmac.hash_ctx, |
| tls12_prf->Ai, hash_length ); |
| if( status != PSA_SUCCESS ) |
| goto cleanup; |
| status = psa_hash_update( &tls12_prf->hmac.hash_ctx, |
| tls12_prf->label, tls12_prf->label_length ); |
| if( status != PSA_SUCCESS ) |
| goto cleanup; |
| status = psa_hash_update( &tls12_prf->hmac.hash_ctx, |
| tls12_prf->seed, tls12_prf->seed_length ); |
| if( status != PSA_SUCCESS ) |
| goto cleanup; |
| status = psa_hmac_finish_internal( &tls12_prf->hmac, |
| tls12_prf->output_block, hash_length ); |
| if( status != PSA_SUCCESS ) |
| goto cleanup; |
| status = psa_hash_clone( &backup, &tls12_prf->hmac.hash_ctx ); |
| if( status != PSA_SUCCESS ) |
| goto cleanup; |
| |
| |
| cleanup: |
| |
| cleanup_status = psa_hash_abort( &backup ); |
| if( status == PSA_SUCCESS && cleanup_status != PSA_SUCCESS ) |
| status = cleanup_status; |
| |
| return( status ); |
| } |
| |
| static psa_status_t psa_key_derivation_tls12_prf_read( |
| psa_tls12_prf_key_derivation_t *tls12_prf, |
| psa_algorithm_t alg, |
| uint8_t *output, |
| size_t output_length ) |
| { |
| psa_algorithm_t hash_alg = PSA_ALG_TLS12_PRF_GET_HASH( alg ); |
| uint8_t hash_length = PSA_HASH_SIZE( hash_alg ); |
| psa_status_t status; |
| uint8_t offset, length; |
| |
| while( output_length != 0 ) |
| { |
| /* Check if we have fully processed the current block. */ |
| if( tls12_prf->left_in_block == 0 ) |
| { |
| status = psa_key_derivation_tls12_prf_generate_next_block( tls12_prf, |
| alg ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| |
| continue; |
| } |
| |
| if( tls12_prf->left_in_block > output_length ) |
| length = (uint8_t) output_length; |
| else |
| length = tls12_prf->left_in_block; |
| |
| offset = hash_length - tls12_prf->left_in_block; |
| memcpy( output, tls12_prf->output_block + offset, length ); |
| output += length; |
| output_length -= length; |
| tls12_prf->left_in_block -= length; |
| } |
| |
| return( PSA_SUCCESS ); |
| } |
| #endif /* MBEDTLS_PSA_BUILTIN_ALG_TLS12_PRF || |
| * MBEDTLS_PSA_BUILTIN_ALG_TLS12_PSK_TO_MS */ |
| |
| psa_status_t psa_key_derivation_output_bytes( |
| psa_key_derivation_operation_t *operation, |
| uint8_t *output, |
| size_t output_length ) |
| { |
| psa_status_t status; |
| psa_algorithm_t kdf_alg = psa_key_derivation_get_kdf_alg( operation ); |
| |
| if( operation->alg == 0 ) |
| { |
| /* This is a blank operation. */ |
| return( PSA_ERROR_BAD_STATE ); |
| } |
| |
| if( output_length > operation->capacity ) |
| { |
| operation->capacity = 0; |
| /* Go through the error path to wipe all confidential data now |
| * that the operation object is useless. */ |
| status = PSA_ERROR_INSUFFICIENT_DATA; |
| goto exit; |
| } |
| if( output_length == 0 && operation->capacity == 0 ) |
| { |
| /* Edge case: this is a finished operation, and 0 bytes |
| * were requested. The right error in this case could |
| * be either INSUFFICIENT_CAPACITY or BAD_STATE. Return |
| * INSUFFICIENT_CAPACITY, which is right for a finished |
| * operation, for consistency with the case when |
| * output_length > 0. */ |
| return( PSA_ERROR_INSUFFICIENT_DATA ); |
| } |
| operation->capacity -= output_length; |
| |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_HKDF) |
| if( PSA_ALG_IS_HKDF( kdf_alg ) ) |
| { |
| psa_algorithm_t hash_alg = PSA_ALG_HKDF_GET_HASH( kdf_alg ); |
| status = psa_key_derivation_hkdf_read( &operation->ctx.hkdf, hash_alg, |
| output, output_length ); |
| } |
| else |
| #endif /* MBEDTLS_PSA_BUILTIN_ALG_HKDF */ |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_TLS12_PRF) || \ |
| defined(MBEDTLS_PSA_BUILTIN_ALG_TLS12_PSK_TO_MS) |
| if( PSA_ALG_IS_TLS12_PRF( kdf_alg ) || |
| PSA_ALG_IS_TLS12_PSK_TO_MS( kdf_alg ) ) |
| { |
| status = psa_key_derivation_tls12_prf_read( &operation->ctx.tls12_prf, |
| kdf_alg, output, |
| output_length ); |
| } |
| else |
| #endif /* MBEDTLS_PSA_BUILTIN_ALG_TLS12_PRF || |
| * MBEDTLS_PSA_BUILTIN_ALG_TLS12_PSK_TO_MS */ |
| { |
| return( PSA_ERROR_BAD_STATE ); |
| } |
| |
| exit: |
| if( status != PSA_SUCCESS ) |
| { |
| /* Preserve the algorithm upon errors, but clear all sensitive state. |
| * This allows us to differentiate between exhausted operations and |
| * blank operations, so we can return PSA_ERROR_BAD_STATE on blank |
| * operations. */ |
| psa_algorithm_t alg = operation->alg; |
| psa_key_derivation_abort( operation ); |
| operation->alg = alg; |
| memset( output, '!', output_length ); |
| } |
| return( status ); |
| } |
| |
| #if defined(MBEDTLS_DES_C) |
| static void psa_des_set_key_parity( uint8_t *data, size_t data_size ) |
| { |
| if( data_size >= 8 ) |
| mbedtls_des_key_set_parity( data ); |
| if( data_size >= 16 ) |
| mbedtls_des_key_set_parity( data + 8 ); |
| if( data_size >= 24 ) |
| mbedtls_des_key_set_parity( data + 16 ); |
| } |
| #endif /* MBEDTLS_DES_C */ |
| |
| static psa_status_t psa_generate_derived_key_internal( |
| psa_key_slot_t *slot, |
| size_t bits, |
| psa_key_derivation_operation_t *operation ) |
| { |
| uint8_t *data = NULL; |
| size_t bytes = PSA_BITS_TO_BYTES( bits ); |
| psa_status_t status; |
| |
| if( ! key_type_is_raw_bytes( slot->attr.type ) ) |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| if( bits % 8 != 0 ) |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| data = mbedtls_calloc( 1, bytes ); |
| if( data == NULL ) |
| return( PSA_ERROR_INSUFFICIENT_MEMORY ); |
| |
| status = psa_key_derivation_output_bytes( operation, data, bytes ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| #if defined(MBEDTLS_DES_C) |
| if( slot->attr.type == PSA_KEY_TYPE_DES ) |
| psa_des_set_key_parity( data, bytes ); |
| #endif /* MBEDTLS_DES_C */ |
| status = psa_import_key_into_slot( slot, data, bytes ); |
| |
| exit: |
| mbedtls_free( data ); |
| return( status ); |
| } |
| |
| psa_status_t psa_key_derivation_output_key( const psa_key_attributes_t *attributes, |
| psa_key_derivation_operation_t *operation, |
| mbedtls_svc_key_id_t *key ) |
| { |
| psa_status_t status; |
| psa_key_slot_t *slot = NULL; |
| psa_se_drv_table_entry_t *driver = NULL; |
| |
| *key = MBEDTLS_SVC_KEY_ID_INIT; |
| |
| /* Reject any attempt to create a zero-length key so that we don't |
| * risk tripping up later, e.g. on a malloc(0) that returns NULL. */ |
| if( psa_get_key_bits( attributes ) == 0 ) |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| |
| if( ! operation->can_output_key ) |
| return( PSA_ERROR_NOT_PERMITTED ); |
| |
| status = psa_start_key_creation( PSA_KEY_CREATION_DERIVE, attributes, |
| &slot, &driver ); |
| #if defined(MBEDTLS_PSA_CRYPTO_SE_C) |
| if( driver != NULL ) |
| { |
| /* Deriving a key in a secure element is not implemented yet. */ |
| status = PSA_ERROR_NOT_SUPPORTED; |
| } |
| #endif /* MBEDTLS_PSA_CRYPTO_SE_C */ |
| if( status == PSA_SUCCESS ) |
| { |
| status = psa_generate_derived_key_internal( slot, |
| attributes->core.bits, |
| operation ); |
| } |
| if( status == PSA_SUCCESS ) |
| status = psa_finish_key_creation( slot, driver, key ); |
| if( status != PSA_SUCCESS ) |
| psa_fail_key_creation( slot, driver ); |
| |
| return( status ); |
| } |
| |
| |
| |
| /****************************************************************/ |
| /* Key derivation */ |
| /****************************************************************/ |
| |
| #ifdef AT_LEAST_ONE_BUILTIN_KDF |
| static psa_status_t psa_key_derivation_setup_kdf( |
| psa_key_derivation_operation_t *operation, |
| psa_algorithm_t kdf_alg ) |
| { |
| int is_kdf_alg_supported; |
| |
| /* Make sure that operation->ctx is properly zero-initialised. (Macro |
| * initialisers for this union leave some bytes unspecified.) */ |
| memset( &operation->ctx, 0, sizeof( operation->ctx ) ); |
| |
| /* Make sure that kdf_alg is a supported key derivation algorithm. */ |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_HKDF) |
| if( PSA_ALG_IS_HKDF( kdf_alg ) ) |
| is_kdf_alg_supported = 1; |
| else |
| #endif |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_TLS12_PRF) |
| if( PSA_ALG_IS_TLS12_PRF( kdf_alg ) ) |
| is_kdf_alg_supported = 1; |
| else |
| #endif |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_TLS12_PSK_TO_MS) |
| if( PSA_ALG_IS_TLS12_PSK_TO_MS( kdf_alg ) ) |
| is_kdf_alg_supported = 1; |
| else |
| #endif |
| is_kdf_alg_supported = 0; |
| |
| if( is_kdf_alg_supported ) |
| { |
| psa_algorithm_t hash_alg = PSA_ALG_HKDF_GET_HASH( kdf_alg ); |
| size_t hash_size = PSA_HASH_SIZE( hash_alg ); |
| if( hash_size == 0 ) |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| if( ( PSA_ALG_IS_TLS12_PRF( kdf_alg ) || |
| PSA_ALG_IS_TLS12_PSK_TO_MS( kdf_alg ) ) && |
| ! ( hash_alg == PSA_ALG_SHA_256 || hash_alg == PSA_ALG_SHA_384 ) ) |
| { |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| } |
| operation->capacity = 255 * hash_size; |
| return( PSA_SUCCESS ); |
| } |
| |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| } |
| #endif /* AT_LEAST_ONE_BUILTIN_KDF */ |
| |
| psa_status_t psa_key_derivation_setup( psa_key_derivation_operation_t *operation, |
| psa_algorithm_t alg ) |
| { |
| psa_status_t status; |
| |
| if( operation->alg != 0 ) |
| return( PSA_ERROR_BAD_STATE ); |
| |
| if( PSA_ALG_IS_RAW_KEY_AGREEMENT( alg ) ) |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| #ifdef AT_LEAST_ONE_BUILTIN_KDF |
| else if( PSA_ALG_IS_KEY_AGREEMENT( alg ) ) |
| { |
| psa_algorithm_t kdf_alg = PSA_ALG_KEY_AGREEMENT_GET_KDF( alg ); |
| status = psa_key_derivation_setup_kdf( operation, kdf_alg ); |
| } |
| else if( PSA_ALG_IS_KEY_DERIVATION( alg ) ) |
| { |
| status = psa_key_derivation_setup_kdf( operation, alg ); |
| } |
| #endif |
| else |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| |
| if( status == PSA_SUCCESS ) |
| operation->alg = alg; |
| return( status ); |
| } |
| |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_HKDF) |
| static psa_status_t psa_hkdf_input( psa_hkdf_key_derivation_t *hkdf, |
| psa_algorithm_t hash_alg, |
| psa_key_derivation_step_t step, |
| const uint8_t *data, |
| size_t data_length ) |
| { |
| psa_status_t status; |
| switch( step ) |
| { |
| case PSA_KEY_DERIVATION_INPUT_SALT: |
| if( hkdf->state != HKDF_STATE_INIT ) |
| return( PSA_ERROR_BAD_STATE ); |
| status = psa_hmac_setup_internal( &hkdf->hmac, |
| data, data_length, |
| hash_alg ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| hkdf->state = HKDF_STATE_STARTED; |
| return( PSA_SUCCESS ); |
| case PSA_KEY_DERIVATION_INPUT_SECRET: |
| /* If no salt was provided, use an empty salt. */ |
| if( hkdf->state == HKDF_STATE_INIT ) |
| { |
| status = psa_hmac_setup_internal( &hkdf->hmac, |
| NULL, 0, |
| hash_alg ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| hkdf->state = HKDF_STATE_STARTED; |
| } |
| if( hkdf->state != HKDF_STATE_STARTED ) |
| return( PSA_ERROR_BAD_STATE ); |
| status = psa_hash_update( &hkdf->hmac.hash_ctx, |
| data, data_length ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| status = psa_hmac_finish_internal( &hkdf->hmac, |
| hkdf->prk, |
| sizeof( hkdf->prk ) ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| hkdf->offset_in_block = PSA_HASH_SIZE( hash_alg ); |
| hkdf->block_number = 0; |
| hkdf->state = HKDF_STATE_KEYED; |
| return( PSA_SUCCESS ); |
| case PSA_KEY_DERIVATION_INPUT_INFO: |
| if( hkdf->state == HKDF_STATE_OUTPUT ) |
| return( PSA_ERROR_BAD_STATE ); |
| if( hkdf->info_set ) |
| return( PSA_ERROR_BAD_STATE ); |
| hkdf->info_length = data_length; |
| if( data_length != 0 ) |
| { |
| hkdf->info = mbedtls_calloc( 1, data_length ); |
| if( hkdf->info == NULL ) |
| return( PSA_ERROR_INSUFFICIENT_MEMORY ); |
| memcpy( hkdf->info, data, data_length ); |
| } |
| hkdf->info_set = 1; |
| return( PSA_SUCCESS ); |
| default: |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| } |
| } |
| #endif /* MBEDTLS_PSA_BUILTIN_ALG_HKDF */ |
| |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_TLS12_PRF) || \ |
| defined(MBEDTLS_PSA_BUILTIN_ALG_TLS12_PSK_TO_MS) |
| static psa_status_t psa_tls12_prf_set_seed( psa_tls12_prf_key_derivation_t *prf, |
| const uint8_t *data, |
| size_t data_length ) |
| { |
| if( prf->state != TLS12_PRF_STATE_INIT ) |
| return( PSA_ERROR_BAD_STATE ); |
| |
| if( data_length != 0 ) |
| { |
| prf->seed = mbedtls_calloc( 1, data_length ); |
| if( prf->seed == NULL ) |
| return( PSA_ERROR_INSUFFICIENT_MEMORY ); |
| |
| memcpy( prf->seed, data, data_length ); |
| prf->seed_length = data_length; |
| } |
| |
| prf->state = TLS12_PRF_STATE_SEED_SET; |
| |
| return( PSA_SUCCESS ); |
| } |
| |
| static psa_status_t psa_tls12_prf_set_key( psa_tls12_prf_key_derivation_t *prf, |
| psa_algorithm_t hash_alg, |
| const uint8_t *data, |
| size_t data_length ) |
| { |
| psa_status_t status; |
| if( prf->state != TLS12_PRF_STATE_SEED_SET ) |
| return( PSA_ERROR_BAD_STATE ); |
| |
| status = psa_hmac_setup_internal( &prf->hmac, data, data_length, hash_alg ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| |
| prf->state = TLS12_PRF_STATE_KEY_SET; |
| |
| return( PSA_SUCCESS ); |
| } |
| |
| static psa_status_t psa_tls12_prf_set_label( psa_tls12_prf_key_derivation_t *prf, |
| const uint8_t *data, |
| size_t data_length ) |
| { |
| if( prf->state != TLS12_PRF_STATE_KEY_SET ) |
| return( PSA_ERROR_BAD_STATE ); |
| |
| if( data_length != 0 ) |
| { |
| prf->label = mbedtls_calloc( 1, data_length ); |
| if( prf->label == NULL ) |
| return( PSA_ERROR_INSUFFICIENT_MEMORY ); |
| |
| memcpy( prf->label, data, data_length ); |
| prf->label_length = data_length; |
| } |
| |
| prf->state = TLS12_PRF_STATE_LABEL_SET; |
| |
| return( PSA_SUCCESS ); |
| } |
| |
| static psa_status_t psa_tls12_prf_input( psa_tls12_prf_key_derivation_t *prf, |
| psa_algorithm_t hash_alg, |
| psa_key_derivation_step_t step, |
| const uint8_t *data, |
| size_t data_length ) |
| { |
| switch( step ) |
| { |
| case PSA_KEY_DERIVATION_INPUT_SEED: |
| return( psa_tls12_prf_set_seed( prf, data, data_length ) ); |
| case PSA_KEY_DERIVATION_INPUT_SECRET: |
| return( psa_tls12_prf_set_key( prf, hash_alg, data, data_length ) ); |
| case PSA_KEY_DERIVATION_INPUT_LABEL: |
| return( psa_tls12_prf_set_label( prf, data, data_length ) ); |
| default: |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| } |
| } |
| #endif /* MBEDTLS_PSA_BUILTIN_ALG_TLS12_PRF) || |
| * MBEDTLS_PSA_BUILTIN_ALG_TLS12_PSK_TO_MS */ |
| |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_TLS12_PSK_TO_MS) |
| static psa_status_t psa_tls12_prf_psk_to_ms_set_key( |
| psa_tls12_prf_key_derivation_t *prf, |
| psa_algorithm_t hash_alg, |
| const uint8_t *data, |
| size_t data_length ) |
| { |
| psa_status_t status; |
| uint8_t pms[ 4 + 2 * PSA_ALG_TLS12_PSK_TO_MS_MAX_PSK_LEN ]; |
| uint8_t *cur = pms; |
| |
| if( data_length > PSA_ALG_TLS12_PSK_TO_MS_MAX_PSK_LEN ) |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| |
| /* Quoting RFC 4279, Section 2: |
| * |
| * The premaster secret is formed as follows: if the PSK is N octets |
| * long, concatenate a uint16 with the value N, N zero octets, a second |
| * uint16 with the value N, and the PSK itself. |
| */ |
| |
| *cur++ = ( data_length >> 8 ) & 0xff; |
| *cur++ = ( data_length >> 0 ) & 0xff; |
| memset( cur, 0, data_length ); |
| cur += data_length; |
| *cur++ = pms[0]; |
| *cur++ = pms[1]; |
| memcpy( cur, data, data_length ); |
| cur += data_length; |
| |
| status = psa_tls12_prf_set_key( prf, hash_alg, pms, cur - pms ); |
| |
| mbedtls_platform_zeroize( pms, sizeof( pms ) ); |
| return( status ); |
| } |
| |
| static psa_status_t psa_tls12_prf_psk_to_ms_input( |
| psa_tls12_prf_key_derivation_t *prf, |
| psa_algorithm_t hash_alg, |
| psa_key_derivation_step_t step, |
| const uint8_t *data, |
| size_t data_length ) |
| { |
| if( step == PSA_KEY_DERIVATION_INPUT_SECRET ) |
| { |
| return( psa_tls12_prf_psk_to_ms_set_key( prf, hash_alg, |
| data, data_length ) ); |
| } |
| |
| return( psa_tls12_prf_input( prf, hash_alg, step, data, data_length ) ); |
| } |
| #endif /* MBEDTLS_PSA_BUILTIN_ALG_TLS12_PSK_TO_MS */ |
| |
| /** Check whether the given key type is acceptable for the given |
| * input step of a key derivation. |
| * |
| * Secret inputs must have the type #PSA_KEY_TYPE_DERIVE. |
| * Non-secret inputs must have the type #PSA_KEY_TYPE_RAW_DATA. |
| * Both secret and non-secret inputs can alternatively have the type |
| * #PSA_KEY_TYPE_NONE, which is never the type of a key object, meaning |
| * that the input was passed as a buffer rather than via a key object. |
| */ |
| static int psa_key_derivation_check_input_type( |
| psa_key_derivation_step_t step, |
| psa_key_type_t key_type ) |
| { |
| switch( step ) |
| { |
| case PSA_KEY_DERIVATION_INPUT_SECRET: |
| if( key_type == PSA_KEY_TYPE_DERIVE ) |
| return( PSA_SUCCESS ); |
| if( key_type == PSA_KEY_TYPE_NONE ) |
| return( PSA_SUCCESS ); |
| break; |
| case PSA_KEY_DERIVATION_INPUT_LABEL: |
| case PSA_KEY_DERIVATION_INPUT_SALT: |
| case PSA_KEY_DERIVATION_INPUT_INFO: |
| case PSA_KEY_DERIVATION_INPUT_SEED: |
| if( key_type == PSA_KEY_TYPE_RAW_DATA ) |
| return( PSA_SUCCESS ); |
| if( key_type == PSA_KEY_TYPE_NONE ) |
| return( PSA_SUCCESS ); |
| break; |
| } |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| } |
| |
| static psa_status_t psa_key_derivation_input_internal( |
| psa_key_derivation_operation_t *operation, |
| psa_key_derivation_step_t step, |
| psa_key_type_t key_type, |
| const uint8_t *data, |
| size_t data_length ) |
| { |
| psa_status_t status; |
| psa_algorithm_t kdf_alg = psa_key_derivation_get_kdf_alg( operation ); |
| |
| status = psa_key_derivation_check_input_type( step, key_type ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_HKDF) |
| if( PSA_ALG_IS_HKDF( kdf_alg ) ) |
| { |
| status = psa_hkdf_input( &operation->ctx.hkdf, |
| PSA_ALG_HKDF_GET_HASH( kdf_alg ), |
| step, data, data_length ); |
| } |
| else |
| #endif /* MBEDTLS_PSA_BUILTIN_ALG_HKDF */ |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_TLS12_PRF) |
| if( PSA_ALG_IS_TLS12_PRF( kdf_alg ) ) |
| { |
| status = psa_tls12_prf_input( &operation->ctx.tls12_prf, |
| PSA_ALG_HKDF_GET_HASH( kdf_alg ), |
| step, data, data_length ); |
| } |
| else |
| #endif /* MBEDTLS_PSA_BUILTIN_ALG_TLS12_PRF */ |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_TLS12_PSK_TO_MS) |
| if( PSA_ALG_IS_TLS12_PSK_TO_MS( kdf_alg ) ) |
| { |
| status = psa_tls12_prf_psk_to_ms_input( &operation->ctx.tls12_prf, |
| PSA_ALG_HKDF_GET_HASH( kdf_alg ), |
| step, data, data_length ); |
| } |
| else |
| #endif /* MBEDTLS_PSA_BUILTIN_ALG_TLS12_PSK_TO_MS */ |
| { |
| /* This can't happen unless the operation object was not initialized */ |
| return( PSA_ERROR_BAD_STATE ); |
| } |
| |
| exit: |
| if( status != PSA_SUCCESS ) |
| psa_key_derivation_abort( operation ); |
| return( status ); |
| } |
| |
| psa_status_t psa_key_derivation_input_bytes( |
| psa_key_derivation_operation_t *operation, |
| psa_key_derivation_step_t step, |
| const uint8_t *data, |
| size_t data_length ) |
| { |
| return( psa_key_derivation_input_internal( operation, step, |
| PSA_KEY_TYPE_NONE, |
| data, data_length ) ); |
| } |
| |
| psa_status_t psa_key_derivation_input_key( |
| psa_key_derivation_operation_t *operation, |
| psa_key_derivation_step_t step, |
| mbedtls_svc_key_id_t key ) |
| { |
| psa_status_t status = PSA_ERROR_CORRUPTION_DETECTED; |
| psa_status_t unlock_status = PSA_ERROR_CORRUPTION_DETECTED; |
| psa_key_slot_t *slot; |
| |
| status = psa_get_and_lock_transparent_key_slot_with_policy( |
| key, &slot, PSA_KEY_USAGE_DERIVE, operation->alg ); |
| if( status != PSA_SUCCESS ) |
| { |
| psa_key_derivation_abort( operation ); |
| return( status ); |
| } |
| |
| /* Passing a key object as a SECRET input unlocks the permission |
| * to output to a key object. */ |
| if( step == PSA_KEY_DERIVATION_INPUT_SECRET ) |
| operation->can_output_key = 1; |
| |
| status = psa_key_derivation_input_internal( operation, |
| step, slot->attr.type, |
| slot->data.key.data, |
| slot->data.key.bytes ); |
| |
| unlock_status = psa_unlock_key_slot( slot ); |
| |
| return( ( status == PSA_SUCCESS ) ? unlock_status : status ); |
| } |
| |
| |
| |
| /****************************************************************/ |
| /* Key agreement */ |
| /****************************************************************/ |
| |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_ECDH) |
| static psa_status_t psa_key_agreement_ecdh( const uint8_t *peer_key, |
| size_t peer_key_length, |
| const mbedtls_ecp_keypair *our_key, |
| uint8_t *shared_secret, |
| size_t shared_secret_size, |
| size_t *shared_secret_length ) |
| { |
| mbedtls_ecp_keypair *their_key = NULL; |
| mbedtls_ecdh_context ecdh; |
| psa_status_t status; |
| size_t bits = 0; |
| psa_ecc_family_t curve = mbedtls_ecc_group_to_psa( our_key->grp.id, &bits ); |
| mbedtls_ecdh_init( &ecdh ); |
| |
| status = psa_load_ecp_representation( PSA_KEY_TYPE_ECC_PUBLIC_KEY(curve), |
| peer_key, |
| peer_key_length, |
| &their_key ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| |
| status = mbedtls_to_psa_error( |
| mbedtls_ecdh_get_params( &ecdh, their_key, MBEDTLS_ECDH_THEIRS ) ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| status = mbedtls_to_psa_error( |
| mbedtls_ecdh_get_params( &ecdh, our_key, MBEDTLS_ECDH_OURS ) ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| |
| status = mbedtls_to_psa_error( |
| mbedtls_ecdh_calc_secret( &ecdh, |
| shared_secret_length, |
| shared_secret, shared_secret_size, |
| mbedtls_ctr_drbg_random, |
| &global_data.ctr_drbg ) ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| if( PSA_BITS_TO_BYTES( bits ) != *shared_secret_length ) |
| status = PSA_ERROR_CORRUPTION_DETECTED; |
| |
| exit: |
| if( status != PSA_SUCCESS ) |
| mbedtls_platform_zeroize( shared_secret, shared_secret_size ); |
| mbedtls_ecdh_free( &ecdh ); |
| mbedtls_ecp_keypair_free( their_key ); |
| mbedtls_free( their_key ); |
| |
| return( status ); |
| } |
| #endif /* MBEDTLS_PSA_BUILTIN_ALG_ECDH */ |
| |
| #define PSA_KEY_AGREEMENT_MAX_SHARED_SECRET_SIZE MBEDTLS_ECP_MAX_BYTES |
| |
| static psa_status_t psa_key_agreement_raw_internal( psa_algorithm_t alg, |
| psa_key_slot_t *private_key, |
| const uint8_t *peer_key, |
| size_t peer_key_length, |
| uint8_t *shared_secret, |
| size_t shared_secret_size, |
| size_t *shared_secret_length ) |
| { |
| switch( alg ) |
| { |
| #if defined(MBEDTLS_PSA_BUILTIN_ALG_ECDH) |
| case PSA_ALG_ECDH: |
| if( ! PSA_KEY_TYPE_IS_ECC_KEY_PAIR( private_key->attr.type ) ) |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| mbedtls_ecp_keypair *ecp = NULL; |
| psa_status_t status = psa_load_ecp_representation( |
| private_key->attr.type, |
| private_key->data.key.data, |
| private_key->data.key.bytes, |
| &ecp ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| status = psa_key_agreement_ecdh( peer_key, peer_key_length, |
| ecp, |
| shared_secret, shared_secret_size, |
| shared_secret_length ); |
| mbedtls_ecp_keypair_free( ecp ); |
| mbedtls_free( ecp ); |
| return( status ); |
| #endif /* MBEDTLS_PSA_BUILTIN_ALG_ECDH */ |
| default: |
| (void) private_key; |
| (void) peer_key; |
| (void) peer_key_length; |
| (void) shared_secret; |
| (void) shared_secret_size; |
| (void) shared_secret_length; |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| } |
| } |
| |
| /* Note that if this function fails, you must call psa_key_derivation_abort() |
| * to potentially free embedded data structures and wipe confidential data. |
| */ |
| static psa_status_t psa_key_agreement_internal( psa_key_derivation_operation_t *operation, |
| psa_key_derivation_step_t step, |
| psa_key_slot_t *private_key, |
| const uint8_t *peer_key, |
| size_t peer_key_length ) |
| { |
| psa_status_t status; |
| uint8_t shared_secret[PSA_KEY_AGREEMENT_MAX_SHARED_SECRET_SIZE]; |
| size_t shared_secret_length = 0; |
| psa_algorithm_t ka_alg = PSA_ALG_KEY_AGREEMENT_GET_BASE( operation->alg ); |
| |
| /* Step 1: run the secret agreement algorithm to generate the shared |
| * secret. */ |
| status = psa_key_agreement_raw_internal( ka_alg, |
| private_key, |
| peer_key, peer_key_length, |
| shared_secret, |
| sizeof( shared_secret ), |
| &shared_secret_length ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| |
| /* Step 2: set up the key derivation to generate key material from |
| * the shared secret. A shared secret is permitted wherever a key |
| * of type DERIVE is permitted. */ |
| status = psa_key_derivation_input_internal( operation, step, |
| PSA_KEY_TYPE_DERIVE, |
| shared_secret, |
| shared_secret_length ); |
| exit: |
| mbedtls_platform_zeroize( shared_secret, shared_secret_length ); |
| return( status ); |
| } |
| |
| psa_status_t psa_key_derivation_key_agreement( psa_key_derivation_operation_t *operation, |
| psa_key_derivation_step_t step, |
| mbedtls_svc_key_id_t private_key, |
| const uint8_t *peer_key, |
| size_t peer_key_length ) |
| { |
| psa_status_t status = PSA_ERROR_CORRUPTION_DETECTED; |
| psa_status_t unlock_status = PSA_ERROR_CORRUPTION_DETECTED; |
| psa_key_slot_t *slot; |
| |
| if( ! PSA_ALG_IS_KEY_AGREEMENT( operation->alg ) ) |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| status = psa_get_and_lock_transparent_key_slot_with_policy( |
| private_key, &slot, PSA_KEY_USAGE_DERIVE, operation->alg ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| status = psa_key_agreement_internal( operation, step, |
| slot, |
| peer_key, peer_key_length ); |
| if( status != PSA_SUCCESS ) |
| psa_key_derivation_abort( operation ); |
| else |
| { |
| /* If a private key has been added as SECRET, we allow the derived |
| * key material to be used as a key in PSA Crypto. */ |
| if( step == PSA_KEY_DERIVATION_INPUT_SECRET ) |
| operation->can_output_key = 1; |
| } |
| |
| unlock_status = psa_unlock_key_slot( slot ); |
| |
| return( ( status == PSA_SUCCESS ) ? unlock_status : status ); |
| } |
| |
| psa_status_t psa_raw_key_agreement( psa_algorithm_t alg, |
| mbedtls_svc_key_id_t private_key, |
| const uint8_t *peer_key, |
| size_t peer_key_length, |
| uint8_t *output, |
| size_t output_size, |
| size_t *output_length ) |
| { |
| psa_status_t status = PSA_ERROR_CORRUPTION_DETECTED; |
| psa_status_t unlock_status = PSA_ERROR_CORRUPTION_DETECTED; |
| psa_key_slot_t *slot = NULL; |
| |
| if( ! PSA_ALG_IS_KEY_AGREEMENT( alg ) ) |
| { |
| status = PSA_ERROR_INVALID_ARGUMENT; |
| goto exit; |
| } |
| status = psa_get_and_lock_transparent_key_slot_with_policy( |
| private_key, &slot, PSA_KEY_USAGE_DERIVE, alg ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| |
| status = psa_key_agreement_raw_internal( alg, slot, |
| peer_key, peer_key_length, |
| output, output_size, |
| output_length ); |
| |
| exit: |
| if( status != PSA_SUCCESS ) |
| { |
| /* If an error happens and is not handled properly, the output |
| * may be used as a key to protect sensitive data. Arrange for such |
| * a key to be random, which is likely to result in decryption or |
| * verification errors. This is better than filling the buffer with |
| * some constant data such as zeros, which would result in the data |
| * being protected with a reproducible, easily knowable key. |
| */ |
| psa_generate_random( output, output_size ); |
| *output_length = output_size; |
| } |
| |
| unlock_status = psa_unlock_key_slot( slot ); |
| |
| return( ( status == PSA_SUCCESS ) ? unlock_status : status ); |
| } |
| |
| |
| /****************************************************************/ |
| /* Random generation */ |
| /****************************************************************/ |
| |
| psa_status_t psa_generate_random( uint8_t *output, |
| size_t output_size ) |
| { |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; |
| GUARD_MODULE_INITIALIZED; |
| |
| while( output_size > MBEDTLS_CTR_DRBG_MAX_REQUEST ) |
| { |
| ret = mbedtls_ctr_drbg_random( &global_data.ctr_drbg, |
| output, |
| MBEDTLS_CTR_DRBG_MAX_REQUEST ); |
| if( ret != 0 ) |
| return( mbedtls_to_psa_error( ret ) ); |
| output += MBEDTLS_CTR_DRBG_MAX_REQUEST; |
| output_size -= MBEDTLS_CTR_DRBG_MAX_REQUEST; |
| } |
| |
| ret = mbedtls_ctr_drbg_random( &global_data.ctr_drbg, output, output_size ); |
| return( mbedtls_to_psa_error( ret ) ); |
| } |
| |
| #if defined(MBEDTLS_PSA_INJECT_ENTROPY) |
| #include "mbedtls/entropy_poll.h" |
| |
| psa_status_t mbedtls_psa_inject_entropy( const uint8_t *seed, |
| size_t seed_size ) |
| { |
| if( global_data.initialized ) |
| return( PSA_ERROR_NOT_PERMITTED ); |
| |
| if( ( ( seed_size < MBEDTLS_ENTROPY_MIN_PLATFORM ) || |
| ( seed_size < MBEDTLS_ENTROPY_BLOCK_SIZE ) ) || |
| ( seed_size > MBEDTLS_ENTROPY_MAX_SEED_SIZE ) ) |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| |
| return( mbedtls_psa_storage_inject_entropy( seed, seed_size ) ); |
| } |
| #endif /* MBEDTLS_PSA_INJECT_ENTROPY */ |
| |
| #if defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_KEY_PAIR) |
| static psa_status_t psa_read_rsa_exponent( const uint8_t *domain_parameters, |
| size_t domain_parameters_size, |
| int *exponent ) |
| { |
| size_t i; |
| uint32_t acc = 0; |
| |
| if( domain_parameters_size == 0 ) |
| { |
| *exponent = 65537; |
| return( PSA_SUCCESS ); |
| } |
| |
| /* Mbed TLS encodes the public exponent as an int. For simplicity, only |
| * support values that fit in a 32-bit integer, which is larger than |
| * int on just about every platform anyway. */ |
| if( domain_parameters_size > sizeof( acc ) ) |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| for( i = 0; i < domain_parameters_size; i++ ) |
| acc = ( acc << 8 ) | domain_parameters[i]; |
| if( acc > INT_MAX ) |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| *exponent = acc; |
| return( PSA_SUCCESS ); |
| } |
| #endif /* defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_KEY_PAIR) */ |
| |
| static psa_status_t psa_generate_key_internal( |
| psa_key_slot_t *slot, size_t bits, |
| const uint8_t *domain_parameters, size_t domain_parameters_size ) |
| { |
| psa_key_type_t type = slot->attr.type; |
| |
| if( domain_parameters == NULL && domain_parameters_size != 0 ) |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| |
| if( key_type_is_raw_bytes( type ) ) |
| { |
| psa_status_t status; |
| |
| status = validate_unstructured_key_bit_size( slot->attr.type, bits ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| |
| /* Allocate memory for the key */ |
| status = psa_allocate_buffer_to_slot( slot, PSA_BITS_TO_BYTES( bits ) ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| |
| status = psa_generate_random( slot->data.key.data, |
| slot->data.key.bytes ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| |
| slot->attr.bits = (psa_key_bits_t) bits; |
| #if defined(MBEDTLS_DES_C) |
| if( type == PSA_KEY_TYPE_DES ) |
| psa_des_set_key_parity( slot->data.key.data, |
| slot->data.key.bytes ); |
| #endif /* MBEDTLS_DES_C */ |
| } |
| else |
| |
| #if defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_KEY_PAIR) |
| if ( type == PSA_KEY_TYPE_RSA_KEY_PAIR ) |
| { |
| mbedtls_rsa_context rsa; |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; |
| int exponent; |
| psa_status_t status; |
| if( bits > PSA_VENDOR_RSA_MAX_KEY_BITS ) |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| /* Accept only byte-aligned keys, for the same reasons as |
| * in psa_import_rsa_key(). */ |
| if( bits % 8 != 0 ) |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| status = psa_read_rsa_exponent( domain_parameters, |
| domain_parameters_size, |
| &exponent ); |
| if( status != PSA_SUCCESS ) |
| return( status ); |
| mbedtls_rsa_init( &rsa, MBEDTLS_RSA_PKCS_V15, MBEDTLS_MD_NONE ); |
| ret = mbedtls_rsa_gen_key( &rsa, |
| mbedtls_ctr_drbg_random, |
| &global_data.ctr_drbg, |
| (unsigned int) bits, |
| exponent ); |
| if( ret != 0 ) |
| return( mbedtls_to_psa_error( ret ) ); |
| |
| /* Make sure to always have an export representation available */ |
| size_t bytes = PSA_KEY_EXPORT_RSA_KEY_PAIR_MAX_SIZE( bits ); |
| |
| status = psa_allocate_buffer_to_slot( slot, bytes ); |
| if( status != PSA_SUCCESS ) |
| { |
| mbedtls_rsa_free( &rsa ); |
| return( status ); |
| } |
| |
| status = psa_export_rsa_key( type, |
| &rsa, |
| slot->data.key.data, |
| bytes, |
| &slot->data.key.bytes ); |
| mbedtls_rsa_free( &rsa ); |
| if( status != PSA_SUCCESS ) |
| psa_remove_key_data_from_memory( slot ); |
| return( status ); |
| } |
| else |
| #endif /* defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_KEY_PAIR) */ |
| |
| #if defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_ECC_KEY_PAIR) |
| if ( PSA_KEY_TYPE_IS_ECC( type ) && PSA_KEY_TYPE_IS_KEY_PAIR( type ) ) |
| { |
| psa_ecc_family_t curve = PSA_KEY_TYPE_ECC_GET_FAMILY( type ); |
| mbedtls_ecp_group_id grp_id = |
| mbedtls_ecc_group_of_psa( curve, PSA_BITS_TO_BYTES( bits ) ); |
| const mbedtls_ecp_curve_info *curve_info = |
| mbedtls_ecp_curve_info_from_grp_id( grp_id ); |
| mbedtls_ecp_keypair ecp; |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; |
| if( domain_parameters_size != 0 ) |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| if( grp_id == MBEDTLS_ECP_DP_NONE || curve_info == NULL ) |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| mbedtls_ecp_keypair_init( &ecp ); |
| ret = mbedtls_ecp_gen_key( grp_id, &ecp, |
| mbedtls_ctr_drbg_random, |
| &global_data.ctr_drbg ); |
| if( ret != 0 ) |
| { |
| mbedtls_ecp_keypair_free( &ecp ); |
| return( mbedtls_to_psa_error( ret ) ); |
| } |
| |
| |
| /* Make sure to always have an export representation available */ |
| size_t bytes = PSA_BITS_TO_BYTES( bits ); |
| psa_status_t status = psa_allocate_buffer_to_slot( slot, bytes ); |
| if( status != PSA_SUCCESS ) |
| { |
| mbedtls_ecp_keypair_free( &ecp ); |
| return( status ); |
| } |
| |
| status = mbedtls_to_psa_error( |
| mbedtls_ecp_write_key( &ecp, slot->data.key.data, bytes ) ); |
| |
| mbedtls_ecp_keypair_free( &ecp ); |
| if( status != PSA_SUCCESS ) { |
| memset( slot->data.key.data, 0, bytes ); |
| psa_remove_key_data_from_memory( slot ); |
| } |
| return( status ); |
| } |
| else |
| #endif /* defined(MBEDTLS_PSA_BUILTIN_KEY_TYPE_ECC_KEY_PAIR) */ |
| { |
| return( PSA_ERROR_NOT_SUPPORTED ); |
| } |
| |
| return( PSA_SUCCESS ); |
| } |
| |
| psa_status_t psa_generate_key( const psa_key_attributes_t *attributes, |
| mbedtls_svc_key_id_t *key ) |
| { |
| psa_status_t status; |
| psa_key_slot_t *slot = NULL; |
| psa_se_drv_table_entry_t *driver = NULL; |
| |
| *key = MBEDTLS_SVC_KEY_ID_INIT; |
| |
| /* Reject any attempt to create a zero-length key so that we don't |
| * risk tripping up later, e.g. on a malloc(0) that returns NULL. */ |
| if( psa_get_key_bits( attributes ) == 0 ) |
| return( PSA_ERROR_INVALID_ARGUMENT ); |
| |
| status = psa_start_key_creation( PSA_KEY_CREATION_GENERATE, attributes, |
| &slot, &driver ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| |
| status = psa_driver_wrapper_generate_key( attributes, |
| slot ); |
| if( status != PSA_ERROR_NOT_SUPPORTED || |
| psa_key_lifetime_is_external( attributes->core.lifetime ) ) |
| goto exit; |
| |
| status = psa_generate_key_internal( |
| slot, attributes->core.bits, |
| attributes->domain_parameters, attributes->domain_parameters_size ); |
| |
| exit: |
| if( status == PSA_SUCCESS ) |
| status = psa_finish_key_creation( slot, driver, key ); |
| if( status != PSA_SUCCESS ) |
| psa_fail_key_creation( slot, driver ); |
| |
| return( status ); |
| } |
| |
| |
| |
| /****************************************************************/ |
| /* Module setup */ |
| /****************************************************************/ |
| |
| psa_status_t mbedtls_psa_crypto_configure_entropy_sources( |
| void (* entropy_init )( mbedtls_entropy_context *ctx ), |
| void (* entropy_free )( mbedtls_entropy_context *ctx ) ) |
| { |
| if( global_data.rng_state != RNG_NOT_INITIALIZED ) |
| return( PSA_ERROR_BAD_STATE ); |
| global_data.entropy_init = entropy_init; |
| global_data.entropy_free = entropy_free; |
| return( PSA_SUCCESS ); |
| } |
| |
| void mbedtls_psa_crypto_free( void ) |
| { |
| psa_wipe_all_key_slots( ); |
| if( global_data.rng_state != RNG_NOT_INITIALIZED ) |
| { |
| mbedtls_ctr_drbg_free( &global_data.ctr_drbg ); |
| global_data.entropy_free( &global_data.entropy ); |
| } |
| /* Wipe all remaining data, including configuration. |
| * In particular, this sets all state indicator to the value |
| * indicating "uninitialized". */ |
| mbedtls_platform_zeroize( &global_data, sizeof( global_data ) ); |
| #if defined(MBEDTLS_PSA_CRYPTO_SE_C) |
| /* Unregister all secure element drivers, so that we restart from |
| * a pristine state. */ |
| psa_unregister_all_se_drivers( ); |
| #endif /* MBEDTLS_PSA_CRYPTO_SE_C */ |
| } |
| |
| #if defined(PSA_CRYPTO_STORAGE_HAS_TRANSACTIONS) |
| /** Recover a transaction that was interrupted by a power failure. |
| * |
| * This function is called during initialization, before psa_crypto_init() |
| * returns. If this function returns a failure status, the initialization |
| * fails. |
| */ |
| static psa_status_t psa_crypto_recover_transaction( |
| const psa_crypto_transaction_t *transaction ) |
| { |
| switch( transaction->unknown.type ) |
| { |
| case PSA_CRYPTO_TRANSACTION_CREATE_KEY: |
| case PSA_CRYPTO_TRANSACTION_DESTROY_KEY: |
| /* TODO - fall through to the failure case until this |
| * is implemented. |
| * https://github.com/ARMmbed/mbed-crypto/issues/218 |
| */ |
| default: |
| /* We found an unsupported transaction in the storage. |
| * We don't know what state the storage is in. Give up. */ |
| return( PSA_ERROR_STORAGE_FAILURE ); |
| } |
| } |
| #endif /* PSA_CRYPTO_STORAGE_HAS_TRANSACTIONS */ |
| |
| psa_status_t psa_crypto_init( void ) |
| { |
| psa_status_t status; |
| const unsigned char drbg_seed[] = "PSA"; |
| |
| /* Double initialization is explicitly allowed. */ |
| if( global_data.initialized != 0 ) |
| return( PSA_SUCCESS ); |
| |
| /* Set default configuration if |
| * mbedtls_psa_crypto_configure_entropy_sources() hasn't been called. */ |
| if( global_data.entropy_init == NULL ) |
| global_data.entropy_init = mbedtls_entropy_init; |
| if( global_data.entropy_free == NULL ) |
| global_data.entropy_free = mbedtls_entropy_free; |
| |
| /* Initialize the random generator. */ |
| global_data.entropy_init( &global_data.entropy ); |
| #if defined(MBEDTLS_PSA_INJECT_ENTROPY) && \ |
| defined(MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES) |
| /* The PSA entropy injection feature depends on using NV seed as an entropy |
| * source. Add NV seed as an entropy source for PSA entropy injection. */ |
| mbedtls_entropy_add_source( &global_data.entropy, |
| mbedtls_nv_seed_poll, NULL, |
| MBEDTLS_ENTROPY_BLOCK_SIZE, |
| MBEDTLS_ENTROPY_SOURCE_STRONG ); |
| #endif |
| mbedtls_ctr_drbg_init( &global_data.ctr_drbg ); |
| global_data.rng_state = RNG_INITIALIZED; |
| status = mbedtls_to_psa_error( |
| mbedtls_ctr_drbg_seed( &global_data.ctr_drbg, |
| mbedtls_entropy_func, |
| &global_data.entropy, |
| drbg_seed, sizeof( drbg_seed ) - 1 ) ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| global_data.rng_state = RNG_SEEDED; |
| |
| status = psa_initialize_key_slots( ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| |
| #if defined(MBEDTLS_PSA_CRYPTO_SE_C) |
| status = psa_init_all_se_drivers( ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| #endif /* MBEDTLS_PSA_CRYPTO_SE_C */ |
| |
| #if defined(PSA_CRYPTO_STORAGE_HAS_TRANSACTIONS) |
| status = psa_crypto_load_transaction( ); |
| if( status == PSA_SUCCESS ) |
| { |
| status = psa_crypto_recover_transaction( &psa_crypto_transaction ); |
| if( status != PSA_SUCCESS ) |
| goto exit; |
| status = psa_crypto_stop_transaction( ); |
| } |
| else if( status == PSA_ERROR_DOES_NOT_EXIST ) |
| { |
| /* There's no transaction to complete. It's all good. */ |
| status = PSA_SUCCESS; |
| } |
| #endif /* PSA_CRYPTO_STORAGE_HAS_TRANSACTIONS */ |
| |
| /* All done. */ |
| global_data.initialized = 1; |
| |
| exit: |
| if( status != PSA_SUCCESS ) |
| mbedtls_psa_crypto_free( ); |
| return( status ); |
| } |
| |
| #endif /* MBEDTLS_PSA_CRYPTO_C */ |