| /* |
| * Helper functions for tests that use the PSA Crypto API. |
| */ |
| /* |
| * Copyright The Mbed TLS Contributors |
| * SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later |
| */ |
| |
| #ifndef PSA_CRYPTO_HELPERS_H |
| #define PSA_CRYPTO_HELPERS_H |
| |
| #include "test/helpers.h" |
| |
| #if defined(MBEDTLS_PSA_CRYPTO_C) |
| #include "test/psa_helpers.h" |
| #include <psa/crypto.h> |
| #endif |
| |
| |
| #if defined(MBEDTLS_PSA_CRYPTO_C) |
| /** Initialize the PSA Crypto subsystem. */ |
| #define PSA_INIT() PSA_ASSERT(psa_crypto_init()) |
| |
| /** Shut down the PSA Crypto subsystem and destroy persistent keys. |
| * Expect a clean shutdown, with no slots in use. |
| * |
| * If some key slots are still in use, record the test case as failed, |
| * but continue executing. This macro is suitable (and primarily intended) |
| * for use in the cleanup section of test functions. |
| * |
| * \note Persistent keys must be recorded with #TEST_USES_KEY_ID before |
| * creating them. |
| */ |
| #define PSA_DONE() \ |
| do \ |
| { \ |
| mbedtls_test_fail_if_psa_leaking(__LINE__, __FILE__); \ |
| mbedtls_test_psa_purge_key_storage(); \ |
| mbedtls_psa_crypto_free(); \ |
| } \ |
| while (0) |
| #else /*MBEDTLS_PSA_CRYPTO_C */ |
| #define PSA_INIT() ((void) 0) |
| #define PSA_DONE() ((void) 0) |
| #endif /* MBEDTLS_PSA_CRYPTO_C */ |
| |
| #if defined(MBEDTLS_PSA_CRYPTO_C) |
| |
| #if defined(MBEDTLS_PSA_CRYPTO_STORAGE_C) |
| |
| /* Internal function for #TEST_USES_KEY_ID. Return 1 on success, 0 on failure. */ |
| int mbedtls_test_uses_key_id(mbedtls_svc_key_id_t key_id); |
| |
| /** Destroy persistent keys recorded with #TEST_USES_KEY_ID. |
| */ |
| void mbedtls_test_psa_purge_key_storage(void); |
| |
| /** Purge the in-memory cache of persistent keys recorded with |
| * #TEST_USES_KEY_ID. |
| * |
| * Call this function before calling PSA_DONE() if it's ok for |
| * persistent keys to still exist at this point. |
| */ |
| void mbedtls_test_psa_purge_key_cache(void); |
| |
| /** \def TEST_USES_KEY_ID |
| * |
| * Call this macro in a test function before potentially creating a |
| * persistent key. Test functions that use this mechanism must call |
| * mbedtls_test_psa_purge_key_storage() in their cleanup code. |
| * |
| * This macro records a persistent key identifier as potentially used in the |
| * current test case. Recorded key identifiers will be cleaned up at the end |
| * of the test case, even on failure. |
| * |
| * This macro has no effect on volatile keys. Therefore, it is safe to call |
| * this macro in a test function that creates either volatile or persistent |
| * keys depending on the test data. |
| * |
| * This macro currently has no effect on special identifiers |
| * used to store implementation-specific files. |
| * |
| * Calling this macro multiple times on the same key identifier in the same |
| * test case has no effect. |
| * |
| * This macro can fail the test case if there isn't enough memory to |
| * record the key id. |
| * |
| * \param key_id The PSA key identifier to record. |
| */ |
| #define TEST_USES_KEY_ID(key_id) \ |
| TEST_ASSERT(mbedtls_test_uses_key_id(key_id)) |
| |
| #else /* MBEDTLS_PSA_CRYPTO_STORAGE_C */ |
| |
| #define TEST_USES_KEY_ID(key_id) ((void) (key_id)) |
| #define mbedtls_test_psa_purge_key_storage() ((void) 0) |
| #define mbedtls_test_psa_purge_key_cache() ((void) 0) |
| |
| #endif /* MBEDTLS_PSA_CRYPTO_STORAGE_C */ |
| |
| /** Check for things that have not been cleaned up properly in the |
| * PSA subsystem. |
| * |
| * \return NULL if nothing has leaked. |
| * \return A string literal explaining what has not been cleaned up |
| * if applicable. |
| */ |
| const char *mbedtls_test_helper_is_psa_leaking(void); |
| |
| /** Check that no PSA Crypto key slots are in use. |
| * |
| * If any slots are in use, mark the current test as failed and jump to |
| * the exit label. This is equivalent to |
| * `TEST_ASSERT( ! mbedtls_test_helper_is_psa_leaking( ) )` |
| * but with a more informative message. |
| */ |
| #define ASSERT_PSA_PRISTINE() \ |
| do \ |
| { \ |
| if (mbedtls_test_fail_if_psa_leaking(__LINE__, __FILE__)) \ |
| goto exit; \ |
| } \ |
| while (0) |
| |
| /** Shut down the PSA Crypto subsystem, allowing persistent keys to survive. |
| * Expect a clean shutdown, with no slots in use. |
| * |
| * If some key slots are still in use, record the test case as failed and |
| * jump to the `exit` label. |
| */ |
| #define PSA_SESSION_DONE() \ |
| do \ |
| { \ |
| mbedtls_test_psa_purge_key_cache(); \ |
| ASSERT_PSA_PRISTINE(); \ |
| mbedtls_psa_crypto_free(); \ |
| } \ |
| while (0) |
| |
| |
| |
| #if defined(RECORD_PSA_STATUS_COVERAGE_LOG) |
| psa_status_t mbedtls_test_record_status(psa_status_t status, |
| const char *func, |
| const char *file, int line, |
| const char *expr); |
| |
| /** Return value logging wrapper macro. |
| * |
| * Evaluate \p expr. Write a line recording its value to the log file |
| * #STATUS_LOG_FILE_NAME and return the value. The line is a colon-separated |
| * list of fields: |
| * ``` |
| * value of expr:string:__FILE__:__LINE__:expr |
| * ``` |
| * |
| * The test code does not call this macro explicitly because that would |
| * be very invasive. Instead, we instrument the source code by defining |
| * a bunch of wrapper macros like |
| * ``` |
| * #define psa_crypto_init() RECORD_STATUS("psa_crypto_init", psa_crypto_init()) |
| * ``` |
| * These macro definitions must be present in `instrument_record_status.h` |
| * when building the test suites. |
| * |
| * \param string A string, normally a function name. |
| * \param expr An expression to evaluate, normally a call of the function |
| * whose name is in \p string. This expression must return |
| * a value of type #psa_status_t. |
| * \return The value of \p expr. |
| */ |
| #define RECORD_STATUS(string, expr) \ |
| mbedtls_test_record_status((expr), string, __FILE__, __LINE__, #expr) |
| |
| #include "instrument_record_status.h" |
| |
| #endif /* defined(RECORD_PSA_STATUS_COVERAGE_LOG) */ |
| |
| /** Return extended key usage policies. |
| * |
| * Do a key policy permission extension on key usage policies always involves |
| * permissions of other usage policies |
| * (like PSA_KEY_USAGE_SIGN_HASH involves PSA_KEY_USAGE_SIGN_MESSAGE). |
| */ |
| psa_key_usage_t mbedtls_test_update_key_usage_flags(psa_key_usage_t usage_flags); |
| |
| /** Check that no PSA Crypto key slots are in use. |
| * |
| * If any slots are in use, mark the current test as failed. |
| * |
| * \return 0 if the key store is empty, 1 otherwise. |
| */ |
| int mbedtls_test_fail_if_psa_leaking(int line_no, const char *filename); |
| |
| |
| |
| #if defined(MBEDTLS_PSA_INJECT_ENTROPY) |
| /* The #MBEDTLS_PSA_INJECT_ENTROPY feature requires two extra platform |
| * functions, which must be configured as #MBEDTLS_PLATFORM_NV_SEED_READ_MACRO |
| * and #MBEDTLS_PLATFORM_NV_SEED_WRITE_MACRO. The job of these functions |
| * is to read and write from the entropy seed file, which is located |
| * in the PSA ITS file whose uid is #PSA_CRYPTO_ITS_RANDOM_SEED_UID. |
| * (These could have been provided as library functions, but for historical |
| * reasons, they weren't, and so each integrator has to provide a copy |
| * of these functions.) |
| * |
| * Provide implementations of these functions for testing. */ |
| int mbedtls_test_inject_entropy_seed_read(unsigned char *buf, size_t len); |
| int mbedtls_test_inject_entropy_seed_write(unsigned char *buf, size_t len); |
| |
| |
| /** Make sure that the injected entropy is present. |
| * |
| * When MBEDTLS_PSA_INJECT_ENTROPY is enabled, psa_crypto_init() |
| * will fail if the PSA entropy seed is not present. |
| * This function must be called at least once in a test suite or other |
| * program before any call to psa_crypto_init(). |
| * It does not need to be called in each test case. |
| * |
| * The test framework calls this function before running any test case. |
| * |
| * The few tests that might remove the entropy file must call this function |
| * in their cleanup. |
| */ |
| int mbedtls_test_inject_entropy_restore(void); |
| #endif /* MBEDTLS_PSA_INJECT_ENTROPY */ |
| |
| /** Parse binary string and convert it to a long integer |
| */ |
| uint64_t mbedtls_test_parse_binary_string(data_t *bin_string); |
| |
| /** Skip a test case if the given key is a 192 bits AES key and the AES |
| * implementation is at least partially provided by an accelerator or |
| * alternative implementation. |
| * |
| * Call this macro in a test case when a cryptographic operation that may |
| * involve an AES operation returns a #PSA_ERROR_NOT_SUPPORTED error code. |
| * The macro call will skip and not fail the test case in case the operation |
| * involves a 192 bits AES key and the AES implementation is at least |
| * partially provided by an accelerator or alternative implementation. |
| * |
| * Hardware AES implementations not supporting 192 bits keys commonly exist. |
| * Consequently, PSA test cases aim at not failing when an AES operation with |
| * a 192 bits key performed by an alternative AES implementation returns |
| * with the #PSA_ERROR_NOT_SUPPORTED error code. The purpose of this macro |
| * is to facilitate this and make the test case code more readable. |
| * |
| * \param key_type Key type |
| * \param key_bits Key length in number of bits. |
| */ |
| #if defined(MBEDTLS_AES_ALT) || \ |
| defined(MBEDTLS_AES_SETKEY_ENC_ALT) || \ |
| defined(MBEDTLS_PSA_ACCEL_KEY_TYPE_AES) |
| #define MBEDTLS_TEST_HAVE_ALT_AES 1 |
| #else |
| #define MBEDTLS_TEST_HAVE_ALT_AES 0 |
| #endif |
| |
| #define MBEDTLS_TEST_PSA_SKIP_IF_ALT_AES_192(key_type, key_bits) \ |
| do \ |
| { \ |
| if ((MBEDTLS_TEST_HAVE_ALT_AES) && \ |
| ((key_type) == PSA_KEY_TYPE_AES) && \ |
| (key_bits == 192)) \ |
| { \ |
| mbedtls_test_skip("AES-192 not supported", __LINE__, __FILE__); \ |
| goto exit; \ |
| } \ |
| } \ |
| while (0) |
| |
| /** Skip a test case if a GCM operation with a nonce length different from |
| * 12 bytes fails and was performed by an accelerator or alternative |
| * implementation. |
| * |
| * Call this macro in a test case when an AEAD cryptography operation that |
| * may involve the GCM mode returns with a #PSA_ERROR_NOT_SUPPORTED error |
| * code. The macro call will skip and not fail the test case in case the |
| * operation involves the GCM mode, a nonce with a length different from |
| * 12 bytes and the GCM mode implementation is an alternative one. |
| * |
| * Hardware GCM implementations not supporting nonce lengths different from |
| * 12 bytes commonly exist, as supporting a non-12-byte nonce requires |
| * additional computations involving the GHASH function. |
| * Consequently, PSA test cases aim at not failing when an AEAD operation in |
| * GCM mode with a nonce length different from 12 bytes is performed by an |
| * alternative GCM implementation and returns with a #PSA_ERROR_NOT_SUPPORTED |
| * error code. The purpose of this macro is to facilitate this check and make |
| * the test case code more readable. |
| * |
| * \param alg The AEAD algorithm. |
| * \param nonce_length The nonce length in number of bytes. |
| */ |
| #if defined(MBEDTLS_GCM_ALT) || \ |
| defined(MBEDTLS_PSA_ACCEL_ALG_GCM) |
| #define MBEDTLS_TEST_HAVE_ALT_GCM 1 |
| #else |
| #define MBEDTLS_TEST_HAVE_ALT_GCM 0 |
| #endif |
| |
| #define MBEDTLS_TEST_PSA_SKIP_IF_ALT_GCM_NOT_12BYTES_NONCE(alg, \ |
| nonce_length) \ |
| do \ |
| { \ |
| if ((MBEDTLS_TEST_HAVE_ALT_GCM) && \ |
| (PSA_ALG_AEAD_WITH_SHORTENED_TAG((alg), 0) == \ |
| PSA_ALG_AEAD_WITH_SHORTENED_TAG(PSA_ALG_GCM, 0)) && \ |
| ((nonce_length) != 12)) \ |
| { \ |
| mbedtls_test_skip("GCM with non-12-byte IV is not supported", __LINE__, __FILE__); \ |
| goto exit; \ |
| } \ |
| } \ |
| while (0) |
| |
| #endif /* MBEDTLS_PSA_CRYPTO_C */ |
| |
| /** \def USE_PSA_INIT |
| * |
| * Call this macro to initialize the PSA subsystem if #MBEDTLS_USE_PSA_CRYPTO |
| * or #MBEDTLS_SSL_PROTO_TLS1_3 (In contrast to TLS 1.2 implementation, the |
| * TLS 1.3 one uses PSA independently of the definition of |
| * #MBEDTLS_USE_PSA_CRYPTO) is enabled and do nothing otherwise. |
| * |
| * If the initialization fails, mark the test case as failed and jump to the |
| * \p exit label. |
| */ |
| /** \def USE_PSA_DONE |
| * |
| * Call this macro at the end of a test case if you called #USE_PSA_INIT. |
| * |
| * This is like #PSA_DONE except it does nothing under the same conditions as |
| * #USE_PSA_INIT. |
| */ |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) || defined(MBEDTLS_SSL_PROTO_TLS1_3) |
| #define USE_PSA_INIT() PSA_INIT() |
| #define USE_PSA_DONE() PSA_DONE() |
| #else /* MBEDTLS_USE_PSA_CRYPTO || MBEDTLS_SSL_PROTO_TLS1_3 */ |
| /* Define empty macros so that we can use them in the preamble and teardown |
| * of every test function that uses PSA conditionally based on |
| * MBEDTLS_USE_PSA_CRYPTO. */ |
| #define USE_PSA_INIT() ((void) 0) |
| #define USE_PSA_DONE() ((void) 0) |
| #endif /* !MBEDTLS_USE_PSA_CRYPTO && !MBEDTLS_SSL_PROTO_TLS1_3 */ |
| |
| /** \def MD_PSA_INIT |
| * |
| * Call this macro to initialize the PSA subsystem if MD uses a driver, |
| * and do nothing otherwise. |
| * |
| * If the initialization fails, mark the test case as failed and jump to the |
| * \p exit label. |
| */ |
| /** \def MD_PSA_DONE |
| * |
| * Call this macro at the end of a test case if you called #MD_PSA_INIT. |
| * |
| * This is like #PSA_DONE except it does nothing under the same conditions as |
| * #MD_PSA_INIT. |
| */ |
| #if defined(MBEDTLS_MD_SOME_PSA) |
| #define MD_PSA_INIT() PSA_INIT() |
| #define MD_PSA_DONE() PSA_DONE() |
| #else /* MBEDTLS_MD_SOME_PSA */ |
| #define MD_PSA_INIT() ((void) 0) |
| #define MD_PSA_DONE() ((void) 0) |
| #endif /* MBEDTLS_MD_SOME_PSA */ |
| |
| /** \def MD_OR_USE_PSA_INIT |
| * |
| * Call this macro to initialize the PSA subsystem if MD uses a driver, |
| * or if #MBEDTLS_USE_PSA_CRYPTO or #MBEDTLS_SSL_PROTO_TLS1_3 is enabled, |
| * and do nothing otherwise. |
| * |
| * If the initialization fails, mark the test case as failed and jump to the |
| * \p exit label. |
| */ |
| /** \def MD_OR_USE_PSA_DONE |
| * |
| * Call this macro at the end of a test case if you called #MD_OR_USE_PSA_INIT. |
| * |
| * This is like #PSA_DONE except it does nothing under the same conditions as |
| * #MD_OR_USE_PSA_INIT. |
| */ |
| #if defined(MBEDTLS_MD_SOME_PSA) || \ |
| defined(MBEDTLS_USE_PSA_CRYPTO) || defined(MBEDTLS_SSL_PROTO_TLS1_3) |
| #define MD_OR_USE_PSA_INIT() PSA_INIT() |
| #define MD_OR_USE_PSA_DONE() PSA_DONE() |
| #else |
| #define MD_OR_USE_PSA_INIT() ((void) 0) |
| #define MD_OR_USE_PSA_DONE() ((void) 0) |
| #endif |
| |
| /** \def AES_PSA_INIT |
| * |
| * Call this macro to initialize the PSA subsystem if AES_C is not defined, |
| * so that CTR_DRBG uses PSA implementation to get AES-ECB. |
| * |
| * If the initialization fails, mark the test case as failed and jump to the |
| * \p exit label. |
| */ |
| /** \def AES_PSA_DONE |
| * |
| * Call this macro at the end of a test case if you called #AES_PSA_INIT. |
| * |
| * This is like #PSA_DONE except it does nothing under the same conditions as |
| * #AES_PSA_INIT. |
| */ |
| #if defined(MBEDTLS_AES_C) |
| #define AES_PSA_INIT() ((void) 0) |
| #define AES_PSA_DONE() ((void) 0) |
| #else /* MBEDTLS_AES_C */ |
| #define AES_PSA_INIT() PSA_INIT() |
| #define AES_PSA_DONE() PSA_DONE() |
| #endif /* MBEDTLS_AES_C */ |
| |
| #endif /* PSA_CRYPTO_HELPERS_H */ |