| /* |
| * PSA cipher driver entry points |
| */ |
| /* |
| * Copyright The Mbed TLS Contributors |
| * SPDX-License-Identifier: Apache-2.0 |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); you may |
| * not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #ifndef PSA_CRYPTO_CIPHER_H |
| #define PSA_CRYPTO_CIPHER_H |
| |
| #include <mbedtls/cipher.h> |
| #include <psa/crypto.h> |
| |
| /** Get Mbed TLS cipher information given the cipher algorithm PSA identifier |
| * as well as the PSA type and size of the key to be used with the cipher |
| * algorithm. |
| * |
| * \param alg PSA cipher algorithm identifier |
| * \param key_type PSA key type |
| * \param key_bits Size of the key in bits |
| * \param[out] cipher_id Mbed TLS cipher algorithm identifier |
| * |
| * \return The Mbed TLS cipher information of the cipher algorithm. |
| * \c NULL if the PSA cipher algorithm is not supported. |
| */ |
| const mbedtls_cipher_info_t *mbedtls_cipher_info_from_psa( |
| psa_algorithm_t alg, psa_key_type_t key_type, size_t key_bits, |
| mbedtls_cipher_id_t *cipher_id ); |
| |
| /** |
| * \brief Set the key for a multipart symmetric encryption operation. |
| * |
| * \note The signature of this function is that of a PSA driver |
| * cipher_encrypt_setup entry point. This function behaves as a |
| * cipher_encrypt_setup entry point as defined in the PSA driver |
| * interface specification for transparent drivers. |
| * |
| * \param[in,out] operation The operation object to set up. It has been |
| * initialized as per the documentation for |
| * #psa_cipher_operation_t and not yet in use. |
| * \param[in] attributes The attributes of the key to use for the |
| * operation. |
| * \param[in] key_buffer The buffer containing the key context. |
| * \param[in] key_buffer_size Size of the \p key_buffer buffer in bytes. |
| * \param[in] alg The cipher algorithm to compute |
| * (\c PSA_ALG_XXX value such that |
| * #PSA_ALG_IS_CIPHER(\p alg) is true). |
| * |
| * \retval #PSA_SUCCESS |
| * \retval #PSA_ERROR_NOT_SUPPORTED |
| * \retval #PSA_ERROR_INSUFFICIENT_MEMORY |
| * \retval #PSA_ERROR_CORRUPTION_DETECTED |
| */ |
| psa_status_t mbedtls_psa_cipher_encrypt_setup( |
| mbedtls_psa_cipher_operation_t *operation, |
| const psa_key_attributes_t *attributes, |
| const uint8_t *key_buffer, size_t key_buffer_size, |
| psa_algorithm_t alg ); |
| |
| /** |
| * \brief Set the key for a multipart symmetric decryption operation. |
| * |
| * \note The signature of this function is that of a PSA driver |
| * cipher_decrypt_setup entry point. This function behaves as a |
| * cipher_decrypt_setup entry point as defined in the PSA driver |
| * interface specification for transparent drivers. |
| * |
| * \param[in,out] operation The operation object to set up. It has been |
| * initialized as per the documentation for |
| * #psa_cipher_operation_t and not yet in use. |
| * \param[in] attributes The attributes of the key to use for the |
| * operation. |
| * \param[in] key_buffer The buffer containing the key context. |
| * \param[in] key_buffer_size Size of the \p key_buffer buffer in bytes. |
| * \param[in] alg The cipher algorithm to compute |
| * (\c PSA_ALG_XXX value such that |
| * #PSA_ALG_IS_CIPHER(\p alg) is true). |
| * |
| * \retval #PSA_SUCCESS |
| * \retval #PSA_ERROR_NOT_SUPPORTED |
| * \retval #PSA_ERROR_INSUFFICIENT_MEMORY |
| * \retval #PSA_ERROR_CORRUPTION_DETECTED |
| */ |
| psa_status_t mbedtls_psa_cipher_decrypt_setup( |
| mbedtls_psa_cipher_operation_t *operation, |
| const psa_key_attributes_t *attributes, |
| const uint8_t *key_buffer, size_t key_buffer_size, |
| psa_algorithm_t alg ); |
| |
| /** Set the IV for a symmetric encryption or decryption operation. |
| * |
| * This function sets the IV (initialization vector), nonce |
| * or initial counter value for the encryption or decryption operation. |
| * |
| * \note The signature of this function is that of a PSA driver |
| * cipher_set_iv entry point. This function behaves as a |
| * cipher_set_iv entry point as defined in the PSA driver |
| * interface specification for transparent drivers. |
| * |
| * \param[in,out] operation Active cipher operation. |
| * \param[in] iv Buffer containing the IV to use. |
| * \param[in] iv_length Size of the IV in bytes. It is guaranteed by |
| * the core to be less or equal to |
| * PSA_CIPHER_IV_MAX_SIZE. |
| * |
| * \retval #PSA_SUCCESS |
| * \retval #PSA_ERROR_INVALID_ARGUMENT |
| * The size of \p iv is not acceptable for the chosen algorithm, |
| * or the chosen algorithm does not use an IV. |
| * \retval #PSA_ERROR_INSUFFICIENT_MEMORY |
| */ |
| psa_status_t mbedtls_psa_cipher_set_iv( |
| mbedtls_psa_cipher_operation_t *operation, |
| const uint8_t *iv, size_t iv_length ); |
| |
| /** Encrypt or decrypt a message fragment in an active cipher operation. |
| * |
| * \note The signature of this function is that of a PSA driver |
| * cipher_update entry point. This function behaves as a |
| * cipher_update entry point as defined in the PSA driver |
| * interface specification for transparent drivers. |
| * |
| * \param[in,out] operation Active cipher operation. |
| * \param[in] input Buffer containing the message fragment to |
| * encrypt or decrypt. |
| * \param[in] input_length Size of the \p input buffer in bytes. |
| * \param[out] output Buffer where the output is to be written. |
| * \param[in] output_size Size of the \p output buffer in bytes. |
| * \param[out] output_length On success, the number of bytes |
| * that make up the returned output. |
| * |
| * \retval #PSA_SUCCESS |
| * \retval #PSA_ERROR_BUFFER_TOO_SMALL |
| * The size of the \p output buffer is too small. |
| * \retval #PSA_ERROR_INSUFFICIENT_MEMORY |
| */ |
| psa_status_t mbedtls_psa_cipher_update( |
| mbedtls_psa_cipher_operation_t *operation, |
| const uint8_t *input, size_t input_length, |
| uint8_t *output, size_t output_size, size_t *output_length ); |
| |
| /** Finish encrypting or decrypting a message in a cipher operation. |
| * |
| * \note The signature of this function is that of a PSA driver |
| * cipher_finish entry point. This function behaves as a |
| * cipher_finish entry point as defined in the PSA driver |
| * interface specification for transparent drivers. |
| * |
| * \param[in,out] operation Active cipher operation. |
| * \param[out] output Buffer where the output is to be written. |
| * \param[in] output_size Size of the \p output buffer in bytes. |
| * \param[out] output_length On success, the number of bytes |
| * that make up the returned output. |
| * |
| * \retval #PSA_SUCCESS |
| * \retval #PSA_ERROR_INVALID_ARGUMENT |
| * The total input size passed to this operation is not valid for |
| * this particular algorithm. For example, the algorithm is a based |
| * on block cipher and requires a whole number of blocks, but the |
| * total input size is not a multiple of the block size. |
| * \retval #PSA_ERROR_INVALID_PADDING |
| * This is a decryption operation for an algorithm that includes |
| * padding, and the ciphertext does not contain valid padding. |
| * \retval #PSA_ERROR_BUFFER_TOO_SMALL |
| * The size of the \p output buffer is too small. |
| * \retval #PSA_ERROR_INSUFFICIENT_MEMORY |
| */ |
| psa_status_t mbedtls_psa_cipher_finish( |
| mbedtls_psa_cipher_operation_t *operation, |
| uint8_t *output, size_t output_size, size_t *output_length ); |
| |
| /** Abort a cipher operation. |
| * |
| * Aborting an operation frees all associated resources except for the |
| * \p operation structure itself. Once aborted, the operation object |
| * can be reused for another operation. |
| * |
| * \note The signature of this function is that of a PSA driver |
| * cipher_abort entry point. This function behaves as a |
| * cipher_abort entry point as defined in the PSA driver |
| * interface specification for transparent drivers. |
| * |
| * \param[in,out] operation Initialized cipher operation. |
| * |
| * \retval #PSA_SUCCESS |
| */ |
| psa_status_t mbedtls_psa_cipher_abort( mbedtls_psa_cipher_operation_t *operation ); |
| |
| /* |
| * BEYOND THIS POINT, TEST DRIVER ENTRY POINTS ONLY. |
| */ |
| |
| #if defined(PSA_CRYPTO_DRIVER_TEST) |
| psa_status_t mbedtls_transparent_test_driver_cipher_encrypt_setup( |
| mbedtls_psa_cipher_operation_t *operation, |
| const psa_key_attributes_t *attributes, |
| const uint8_t *key_buffer, size_t key_buffer_size, |
| psa_algorithm_t alg ); |
| |
| psa_status_t mbedtls_transparent_test_driver_cipher_decrypt_setup( |
| mbedtls_psa_cipher_operation_t *operation, |
| const psa_key_attributes_t *attributes, |
| const uint8_t *key_buffer, size_t key_buffer_size, |
| psa_algorithm_t alg ); |
| |
| psa_status_t mbedtls_transparent_test_driver_cipher_set_iv( |
| mbedtls_psa_cipher_operation_t *operation, |
| const uint8_t *iv, size_t iv_length ); |
| |
| psa_status_t mbedtls_transparent_test_driver_cipher_update( |
| mbedtls_psa_cipher_operation_t *operation, |
| const uint8_t *input, size_t input_length, |
| uint8_t *output, size_t output_size, size_t *output_length ); |
| |
| psa_status_t mbedtls_transparent_test_driver_cipher_finish( |
| mbedtls_psa_cipher_operation_t *operation, |
| uint8_t *output, size_t output_size, size_t *output_length ); |
| |
| psa_status_t mbedtls_transparent_test_driver_cipher_abort( |
| mbedtls_psa_cipher_operation_t *operation ); |
| #endif /* PSA_CRYPTO_DRIVER_TEST */ |
| |
| #endif /* PSA_CRYPTO_CIPHER_H */ |
