| /** |
| * \file net_sockets.h |
| * |
| * \brief Network sockets abstraction layer to integrate Mbed TLS into a |
| * BSD-style sockets API. |
| * |
| * The network sockets module provides an example integration of the |
| * Mbed TLS library into a BSD sockets implementation. The module is |
| * intended to be an example of how Mbed TLS can be integrated into a |
| * networking stack, as well as to be Mbed TLS's network integration |
| * for its supported platforms. |
| * |
| * The module is intended only to be used with the Mbed TLS library and |
| * is not intended to be used by third party application software |
| * directly. |
| * |
| * The supported platforms are as follows: |
| * * Microsoft Windows and Windows CE |
| * * POSIX/Unix platforms including Linux, OS X |
| * |
| */ |
| /* |
| * Copyright The Mbed TLS Contributors |
| * SPDX-License-Identifier: Apache-2.0 |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); you may |
| * not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| #ifndef MBEDTLS_NET_SOCKETS_H |
| #define MBEDTLS_NET_SOCKETS_H |
| |
| #if !defined(MBEDTLS_CONFIG_FILE) |
| #include "mbedtls/config.h" |
| #else |
| #include MBEDTLS_CONFIG_FILE |
| #endif |
| |
| #include "mbedtls/ssl.h" |
| |
| #include <stddef.h> |
| #include <stdint.h> |
| |
| #define MBEDTLS_ERR_NET_SOCKET_FAILED -0x0042 /**< Failed to open a socket. */ |
| #define MBEDTLS_ERR_NET_CONNECT_FAILED -0x0044 /**< The connection to the given server / port failed. */ |
| #define MBEDTLS_ERR_NET_BIND_FAILED -0x0046 /**< Binding of the socket failed. */ |
| #define MBEDTLS_ERR_NET_LISTEN_FAILED -0x0048 /**< Could not listen on the socket. */ |
| #define MBEDTLS_ERR_NET_ACCEPT_FAILED -0x004A /**< Could not accept the incoming connection. */ |
| #define MBEDTLS_ERR_NET_RECV_FAILED -0x004C /**< Reading information from the socket failed. */ |
| #define MBEDTLS_ERR_NET_SEND_FAILED -0x004E /**< Sending information through the socket failed. */ |
| #define MBEDTLS_ERR_NET_CONN_RESET -0x0050 /**< Connection was reset by peer. */ |
| #define MBEDTLS_ERR_NET_UNKNOWN_HOST -0x0052 /**< Failed to get an IP address for the given hostname. */ |
| #define MBEDTLS_ERR_NET_BUFFER_TOO_SMALL -0x0043 /**< Buffer is too small to hold the data. */ |
| #define MBEDTLS_ERR_NET_INVALID_CONTEXT -0x0045 /**< The context is invalid, eg because it was free()ed. */ |
| #define MBEDTLS_ERR_NET_POLL_FAILED -0x0047 /**< Polling the net context failed. */ |
| #define MBEDTLS_ERR_NET_BAD_INPUT_DATA -0x0049 /**< Input invalid. */ |
| |
| #define MBEDTLS_NET_LISTEN_BACKLOG 10 /**< The backlog that listen() should use. */ |
| |
| #define MBEDTLS_NET_PROTO_TCP 0 /**< The TCP transport protocol */ |
| #define MBEDTLS_NET_PROTO_UDP 1 /**< The UDP transport protocol */ |
| |
| #define MBEDTLS_NET_POLL_READ 1 /**< Used in \c mbedtls_net_poll to check for pending data */ |
| #define MBEDTLS_NET_POLL_WRITE 2 /**< Used in \c mbedtls_net_poll to check if write possible */ |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /** |
| * Wrapper type for sockets. |
| * |
| * Currently backed by just a file descriptor, but might be more in the future |
| * (eg two file descriptors for combined IPv4 + IPv6 support, or additional |
| * structures for hand-made UDP demultiplexing). |
| */ |
| typedef struct mbedtls_net_context |
| { |
| int fd; /**< The underlying file descriptor */ |
| } |
| mbedtls_net_context; |
| |
| /** |
| * \brief Initialize a context |
| * Just makes the context ready to be used or freed safely. |
| * |
| * \param ctx Context to initialize |
| */ |
| void mbedtls_net_init( mbedtls_net_context *ctx ); |
| |
| /** |
| * \brief Initiate a connection with host:port in the given protocol |
| * |
| * \param ctx Socket to use |
| * \param host Host to connect to |
| * \param port Port to connect to |
| * \param proto Protocol: MBEDTLS_NET_PROTO_TCP or MBEDTLS_NET_PROTO_UDP |
| * |
| * \return 0 if successful, or one of: |
| * MBEDTLS_ERR_NET_SOCKET_FAILED, |
| * MBEDTLS_ERR_NET_UNKNOWN_HOST, |
| * MBEDTLS_ERR_NET_CONNECT_FAILED |
| * |
| * \note Sets the socket in connected mode even with UDP. |
| */ |
| int mbedtls_net_connect( mbedtls_net_context *ctx, const char *host, const char *port, int proto ); |
| |
| /** |
| * \brief Create a receiving socket on bind_ip:port in the chosen |
| * protocol. If bind_ip == NULL, all interfaces are bound. |
| * |
| * \param ctx Socket to use |
| * \param bind_ip IP to bind to, can be NULL |
| * \param port Port number to use |
| * \param proto Protocol: MBEDTLS_NET_PROTO_TCP or MBEDTLS_NET_PROTO_UDP |
| * |
| * \return 0 if successful, or one of: |
| * MBEDTLS_ERR_NET_SOCKET_FAILED, |
| * MBEDTLS_ERR_NET_UNKNOWN_HOST, |
| * MBEDTLS_ERR_NET_BIND_FAILED, |
| * MBEDTLS_ERR_NET_LISTEN_FAILED |
| * |
| * \note Regardless of the protocol, opens the sockets and binds it. |
| * In addition, make the socket listening if protocol is TCP. |
| */ |
| int mbedtls_net_bind( mbedtls_net_context *ctx, const char *bind_ip, const char *port, int proto ); |
| |
| /** |
| * \brief Accept a connection from a remote client |
| * |
| * \param bind_ctx Relevant socket |
| * \param client_ctx Will contain the connected client socket |
| * \param client_ip Will contain the client IP address, can be NULL |
| * \param buf_size Size of the client_ip buffer |
| * \param ip_len Will receive the size of the client IP written, |
| * can be NULL if client_ip is null |
| * |
| * \return 0 if successful, or |
| * MBEDTLS_ERR_NET_SOCKET_FAILED, |
| * MBEDTLS_ERR_NET_BIND_FAILED, |
| * MBEDTLS_ERR_NET_ACCEPT_FAILED, or |
| * MBEDTLS_ERR_NET_BUFFER_TOO_SMALL if buf_size is too small, |
| * MBEDTLS_ERR_SSL_WANT_READ if bind_fd was set to |
| * non-blocking and accept() would block. |
| */ |
| int mbedtls_net_accept( mbedtls_net_context *bind_ctx, |
| mbedtls_net_context *client_ctx, |
| void *client_ip, size_t buf_size, size_t *ip_len ); |
| |
| /** |
| * \brief Check and wait for the context to be ready for read/write |
| * |
| * \note The current implementation of this function uses |
| * select() and returns an error if the file descriptor |
| * is \c FD_SETSIZE or greater. |
| * |
| * \param ctx Socket to check |
| * \param rw Bitflag composed of MBEDTLS_NET_POLL_READ and |
| * MBEDTLS_NET_POLL_WRITE specifying the events |
| * to wait for: |
| * - If MBEDTLS_NET_POLL_READ is set, the function |
| * will return as soon as the net context is available |
| * for reading. |
| * - If MBEDTLS_NET_POLL_WRITE is set, the function |
| * will return as soon as the net context is available |
| * for writing. |
| * \param timeout Maximal amount of time to wait before returning, |
| * in milliseconds. If \c timeout is zero, the |
| * function returns immediately. If \c timeout is |
| * -1u, the function blocks potentially indefinitely. |
| * |
| * \return Bitmask composed of MBEDTLS_NET_POLL_READ/WRITE |
| * on success or timeout, or a negative return code otherwise. |
| */ |
| int mbedtls_net_poll( mbedtls_net_context *ctx, uint32_t rw, uint32_t timeout ); |
| |
| /** |
| * \brief Set the socket blocking |
| * |
| * \param ctx Socket to set |
| * |
| * \return 0 if successful, or a non-zero error code |
| */ |
| int mbedtls_net_set_block( mbedtls_net_context *ctx ); |
| |
| /** |
| * \brief Set the socket non-blocking |
| * |
| * \param ctx Socket to set |
| * |
| * \return 0 if successful, or a non-zero error code |
| */ |
| int mbedtls_net_set_nonblock( mbedtls_net_context *ctx ); |
| |
| /** |
| * \brief Portable usleep helper |
| * |
| * \param usec Amount of microseconds to sleep |
| * |
| * \note Real amount of time slept will not be less than |
| * select()'s timeout granularity (typically, 10ms). |
| */ |
| void mbedtls_net_usleep( unsigned long usec ); |
| |
| /** |
| * \brief Read at most 'len' characters. If no error occurs, |
| * the actual amount read is returned. |
| * |
| * \param ctx Socket |
| * \param buf The buffer to write to |
| * \param len Maximum length of the buffer |
| * |
| * \return the number of bytes received, |
| * or a non-zero error code; with a non-blocking socket, |
| * MBEDTLS_ERR_SSL_WANT_READ indicates read() would block. |
| */ |
| int mbedtls_net_recv( void *ctx, unsigned char *buf, size_t len ); |
| |
| /** |
| * \brief Write at most 'len' characters. If no error occurs, |
| * the actual amount read is returned. |
| * |
| * \param ctx Socket |
| * \param buf The buffer to read from |
| * \param len The length of the buffer |
| * |
| * \return the number of bytes sent, |
| * or a non-zero error code; with a non-blocking socket, |
| * MBEDTLS_ERR_SSL_WANT_WRITE indicates write() would block. |
| */ |
| int mbedtls_net_send( void *ctx, const unsigned char *buf, size_t len ); |
| |
| /** |
| * \brief Read at most 'len' characters, blocking for at most |
| * 'timeout' seconds. If no error occurs, the actual amount |
| * read is returned. |
| * |
| * \note The current implementation of this function uses |
| * select() and returns an error if the file descriptor |
| * is \c FD_SETSIZE or greater. |
| * |
| * \param ctx Socket |
| * \param buf The buffer to write to |
| * \param len Maximum length of the buffer |
| * \param timeout Maximum number of milliseconds to wait for data |
| * 0 means no timeout (wait forever) |
| * |
| * \return The number of bytes received if successful. |
| * MBEDTLS_ERR_SSL_TIMEOUT if the operation timed out. |
| * MBEDTLS_ERR_SSL_WANT_READ if interrupted by a signal. |
| * Another negative error code (MBEDTLS_ERR_NET_xxx) |
| * for other failures. |
| * |
| * \note This function will block (until data becomes available or |
| * timeout is reached) even if the socket is set to |
| * non-blocking. Handling timeouts with non-blocking reads |
| * requires a different strategy. |
| */ |
| int mbedtls_net_recv_timeout( void *ctx, unsigned char *buf, size_t len, |
| uint32_t timeout ); |
| |
| /** |
| * \brief Closes down the connection and free associated data |
| * |
| * \param ctx The context to close |
| */ |
| void mbedtls_net_close( mbedtls_net_context *ctx ); |
| |
| /** |
| * \brief Gracefully shutdown the connection and free associated data |
| * |
| * \param ctx The context to free |
| */ |
| void mbedtls_net_free( mbedtls_net_context *ctx ); |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* net_sockets.h */ |