| /** |
| * \file psa/crypto_config.h |
| * \brief PSA crypto configuration options (set of defines) |
| * |
| */ |
| #if defined(MBEDTLS_PSA_CRYPTO_CONFIG) |
| /** |
| * When #MBEDTLS_PSA_CRYPTO_CONFIG is enabled in mbedtls_config.h, |
| * this file determines which cryptographic mechanisms are enabled |
| * through the PSA Cryptography API (\c psa_xxx() functions). |
| * |
| * To enable a cryptographic mechanism, uncomment the definition of |
| * the corresponding \c PSA_WANT_xxx preprocessor symbol. |
| * To disable a cryptographic mechanism, comment out the definition of |
| * the corresponding \c PSA_WANT_xxx preprocessor symbol. |
| * The names of cryptographic mechanisms correspond to values |
| * defined in psa/crypto_values.h, with the prefix \c PSA_WANT_ instead |
| * of \c PSA_. |
| * |
| * Note that many cryptographic mechanisms involve two symbols: one for |
| * the key type (\c PSA_WANT_KEY_TYPE_xxx) and one for the algorithm |
| * (\c PSA_WANT_ALG_xxx). Mechanisms with additional parameters may involve |
| * additional symbols. |
| */ |
| #else |
| /** |
| * When \c MBEDTLS_PSA_CRYPTO_CONFIG is disabled in mbedtls_config.h, |
| * this file is not used, and cryptographic mechanisms are supported |
| * through the PSA API if and only if they are supported through the |
| * mbedtls_xxx API. |
| */ |
| #endif |
| /* |
| * Copyright The Mbed TLS Contributors |
| * SPDX-License-Identifier: Apache-2.0 |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); you may |
| * not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #ifndef PSA_CRYPTO_CONFIG_H |
| #define PSA_CRYPTO_CONFIG_H |
| |
| /* |
| * CBC-MAC is not yet supported via the PSA API in Mbed TLS. |
| */ |
| //#define PSA_WANT_ALG_CBC_MAC 1 |
| #define PSA_WANT_ALG_CBC_NO_PADDING 1 |
| #define PSA_WANT_ALG_CBC_PKCS7 1 |
| #define PSA_WANT_ALG_CCM 1 |
| #define PSA_WANT_ALG_CMAC 1 |
| #define PSA_WANT_ALG_CFB 1 |
| #define PSA_WANT_ALG_CHACHA20_POLY1305 1 |
| #define PSA_WANT_ALG_CTR 1 |
| #define PSA_WANT_ALG_DETERMINISTIC_ECDSA 1 |
| #define PSA_WANT_ALG_ECB_NO_PADDING 1 |
| #define PSA_WANT_ALG_ECDH 1 |
| #define PSA_WANT_ALG_ECDSA 1 |
| #define PSA_WANT_ALG_GCM 1 |
| #define PSA_WANT_ALG_HKDF 1 |
| #define PSA_WANT_ALG_HKDF_EXTRACT 1 |
| #define PSA_WANT_ALG_HKDF_EXPAND 1 |
| #define PSA_WANT_ALG_HMAC 1 |
| #define PSA_WANT_ALG_MD5 1 |
| #define PSA_WANT_ALG_OFB 1 |
| /* PBKDF2-HMAC is not yet supported via the PSA API in Mbed TLS. |
| * Note: when adding support, also adjust include/mbedtls/config_psa.h */ |
| //#define PSA_WANT_ALG_PBKDF2_HMAC 1 |
| #define PSA_WANT_ALG_RIPEMD160 1 |
| #define PSA_WANT_ALG_RSA_OAEP 1 |
| #define PSA_WANT_ALG_RSA_PKCS1V15_CRYPT 1 |
| #define PSA_WANT_ALG_RSA_PKCS1V15_SIGN 1 |
| #define PSA_WANT_ALG_RSA_PSS 1 |
| #define PSA_WANT_ALG_SHA_1 1 |
| #define PSA_WANT_ALG_SHA_224 1 |
| #define PSA_WANT_ALG_SHA_256 1 |
| #define PSA_WANT_ALG_SHA_384 1 |
| #define PSA_WANT_ALG_SHA_512 1 |
| #define PSA_WANT_ALG_STREAM_CIPHER 1 |
| #define PSA_WANT_ALG_TLS12_PRF 1 |
| #define PSA_WANT_ALG_TLS12_PSK_TO_MS 1 |
| /* PBKDF2-HMAC is not yet supported via the PSA API in Mbed TLS. |
| * Note: when adding support, also adjust include/mbedtls/config_psa.h */ |
| //#define PSA_WANT_ALG_XTS 1 |
| |
| #define PSA_WANT_ECC_BRAINPOOL_P_R1_256 1 |
| #define PSA_WANT_ECC_BRAINPOOL_P_R1_384 1 |
| #define PSA_WANT_ECC_BRAINPOOL_P_R1_512 1 |
| #define PSA_WANT_ECC_MONTGOMERY_255 1 |
| #define PSA_WANT_ECC_MONTGOMERY_448 1 |
| #define PSA_WANT_ECC_SECP_K1_192 1 |
| /* |
| * SECP224K1 is buggy via the PSA API in Mbed TLS |
| * (https://github.com/Mbed-TLS/mbedtls/issues/3541). Thus, do not enable it by |
| * default. |
| */ |
| //#define PSA_WANT_ECC_SECP_K1_224 1 |
| #define PSA_WANT_ECC_SECP_K1_256 1 |
| #define PSA_WANT_ECC_SECP_R1_192 1 |
| #define PSA_WANT_ECC_SECP_R1_224 1 |
| #define PSA_WANT_ECC_SECP_R1_256 1 |
| #define PSA_WANT_ECC_SECP_R1_384 1 |
| #define PSA_WANT_ECC_SECP_R1_521 1 |
| |
| #define PSA_WANT_KEY_TYPE_DERIVE 1 |
| #define PSA_WANT_KEY_TYPE_HMAC 1 |
| #define PSA_WANT_KEY_TYPE_AES 1 |
| #define PSA_WANT_KEY_TYPE_ARIA 1 |
| #define PSA_WANT_KEY_TYPE_CAMELLIA 1 |
| #define PSA_WANT_KEY_TYPE_CHACHA20 1 |
| #define PSA_WANT_KEY_TYPE_DES 1 |
| #define PSA_WANT_KEY_TYPE_ECC_KEY_PAIR 1 |
| #define PSA_WANT_KEY_TYPE_ECC_PUBLIC_KEY 1 |
| #define PSA_WANT_KEY_TYPE_RAW_DATA 1 |
| #define PSA_WANT_KEY_TYPE_RSA_KEY_PAIR 1 |
| #define PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY 1 |
| |
| #endif /* PSA_CRYPTO_CONFIG_H */ |
