blob: 6813754bcb8af2c3da1e614400cd5ef55bf071b5 [file] [log] [blame]
#!/bin/sh
# Test various options that are not covered by compat.sh
#
# Here the goal is not to cover every ciphersuite/version, but
# rather specific options (max fragment length, truncated hmac, etc)
# or procedures (session resumption from cache or ticket, renego, etc).
#
# Assumes all options are compiled in.
set -u
# default values, can be overriden by the environment
: ${P_SRV:=../programs/ssl/ssl_server2}
: ${P_CLI:=../programs/ssl/ssl_client2}
: ${OPENSSL_CMD:=openssl} # OPENSSL would conflict with the build system
: ${GNUTLS_CLI:=gnutls-cli}
: ${GNUTLS_SERV:=gnutls-serv}
O_SRV="$OPENSSL_CMD s_server -www -cert data_files/server5.crt -key data_files/server5.key"
O_CLI="echo 'GET / HTTP/1.0' | $OPENSSL_CMD s_client"
G_SRV="$GNUTLS_SERV --x509certfile data_files/server5.crt --x509keyfile data_files/server5.key"
G_CLI="echo 'GET / HTTP/1.0' | $GNUTLS_CLI --x509cafile data_files/test-ca_cat12.crt"
TESTS=0
FAILS=0
SKIPS=0
CONFIG_H='../include/polarssl/config.h'
MEMCHECK=0
FILTER='.*'
EXCLUDE='^$'
print_usage() {
echo "Usage: $0 [options]"
printf " -h|--help\tPrint this help.\n"
printf " -m|--memcheck\tCheck memory leaks and errors.\n"
printf " -f|--filter\tOnly matching tests are executed (default: '$FILTER')\n"
printf " -e|--exclude\tMatching tests are excluded (default: '$EXCLUDE')\n"
}
get_options() {
while [ $# -gt 0 ]; do
case "$1" in
-f|--filter)
shift; FILTER=$1
;;
-e|--exclude)
shift; EXCLUDE=$1
;;
-m|--memcheck)
MEMCHECK=1
;;
-h|--help)
print_usage
exit 0
;;
*)
echo "Unknown argument: '$1'"
print_usage
exit 1
;;
esac
shift
done
}
# skip next test if OpenSSL can't send SSLv2 ClientHello
requires_openssl_with_sslv2() {
if [ -z "${OPENSSL_HAS_SSL2:-}" ]; then
if $OPENSSL_CMD ciphers -ssl2 >/dev/null 2>&1; then
OPENSSL_HAS_SSL2="YES"
else
OPENSSL_HAS_SSL2="NO"
fi
fi
if [ "$OPENSSL_HAS_SSL2" = "NO" ]; then
SKIP_NEXT="YES"
fi
}
# skip next test if OpenSSL doesn't support FALLBACK_SCSV
requires_openssl_with_fallback_scsv() {
if [ -z "${OPENSSL_HAS_FBSCSV:-}" ]; then
if $OPENSSL_CMD s_client -help 2>&1 | grep fallback_scsv >/dev/null
then
OPENSSL_HAS_FBSCSV="YES"
else
OPENSSL_HAS_FBSCSV="NO"
fi
fi
if [ "$OPENSSL_HAS_FBSCSV" = "NO" ]; then
SKIP_NEXT="YES"
fi
}
# skip next test if GnuTLS isn't available
requires_gnutls() {
if [ -z "${GNUTLS_AVAILABLE:-}" ]; then
if ( which "$GNUTLS_CLI" && which "$GNUTLS_SERV" ) >/dev/null; then
GNUTLS_AVAILABLE="YES"
else
GNUTLS_AVAILABLE="NO"
fi
fi
if [ "$GNUTLS_AVAILABLE" = "NO" ]; then
SKIP_NEXT="YES"
fi
}
# print_name <name>
print_name() {
printf "$1 "
LEN=$(( 72 - `echo "$1" | wc -c` ))
for i in `seq 1 $LEN`; do printf '.'; done
printf ' '
TESTS=$(( $TESTS + 1 ))
}
# fail <message>
fail() {
echo "FAIL"
echo " ! $1"
mv $SRV_OUT o-srv-${TESTS}.log
mv $CLI_OUT o-cli-${TESTS}.log
echo " ! outputs saved to o-srv-${TESTS}.log and o-cli-${TESTS}.log"
if [ "X${USER:-}" = Xbuildbot -o "X${LOGNAME:-}" = Xbuildbot ]; then
echo " ! server output:"
cat o-srv-${TESTS}.log
echo " ! ============================================================"
echo " ! client output:"
cat o-cli-${TESTS}.log
fi
FAILS=$(( $FAILS + 1 ))
}
# is_polar <cmd_line>
is_polar() {
echo "$1" | grep 'ssl_server2\|ssl_client2' > /dev/null
}
# has_mem_err <log_file_name>
has_mem_err() {
if ( grep -F 'All heap blocks were freed -- no leaks are possible' "$1" &&
grep -F 'ERROR SUMMARY: 0 errors from 0 contexts' "$1" ) > /dev/null
then
return 1 # false: does not have errors
else
return 0 # true: has errors
fi
}
# wait for server to start: two versions depending on lsof availability
wait_server_start() {
if which lsof >/dev/null; then
# make sure we don't loop forever
( sleep "$DOG_DELAY"; echo "SERVERSTART TIMEOUT"; kill $MAIN_PID ) &
WATCHDOG_PID=$!
# make a tight loop, server usually takes less than 1 sec to start
until lsof -nbi TCP:"$PORT" 2>/dev/null | grep LISTEN >/dev/null;
do :; done
kill $WATCHDOG_PID
wait $WATCHDOG_PID
else
sleep "$START_DELAY"
fi
}
# wait for client to terminate and set CLI_EXIT
# must be called right after starting the client
wait_client_done() {
CLI_PID=$!
( sleep "$DOG_DELAY"; echo "TIMEOUT" >> $CLI_OUT; kill $CLI_PID ) &
WATCHDOG_PID=$!
wait $CLI_PID
CLI_EXIT=$?
kill $WATCHDOG_PID
wait $WATCHDOG_PID
echo "EXIT: $CLI_EXIT" >> $CLI_OUT
}
# Usage: run_test name srv_cmd cli_cmd cli_exit [option [...]]
# Options: -s pattern pattern that must be present in server output
# -c pattern pattern that must be present in client output
# -S pattern pattern that must be absent in server output
# -C pattern pattern that must be absent in client output
run_test() {
NAME="$1"
SRV_CMD="$2"
CLI_CMD="$3"
CLI_EXPECT="$4"
shift 4
if echo "$NAME" | grep "$FILTER" | grep -v "$EXCLUDE" >/dev/null; then :
else
return
fi
print_name "$NAME"
# should we skip?
if [ "X$SKIP_NEXT" = "XYES" ]; then
SKIP_NEXT="NO"
echo "SKIP"
SKIPS=$(( $SKIPS + 1 ))
return
fi
# prepend valgrind to our commands if active
if [ "$MEMCHECK" -gt 0 ]; then
if is_polar "$SRV_CMD"; then
SRV_CMD="valgrind --leak-check=full $SRV_CMD"
fi
if is_polar "$CLI_CMD"; then
CLI_CMD="valgrind --leak-check=full $CLI_CMD"
fi
fi
# run the commands
echo "$SRV_CMD" > $SRV_OUT
$SRV_CMD >> $SRV_OUT 2>&1 &
SRV_PID=$!
wait_server_start
echo "$CLI_CMD" > $CLI_OUT
eval "$CLI_CMD" >> $CLI_OUT 2>&1 &
wait_client_done
# kill the server
kill $SRV_PID
wait $SRV_PID
# check if the client and server went at least to the handshake stage
# (useful to avoid tests with only negative assertions and non-zero
# expected client exit to incorrectly succeed in case of catastrophic
# failure)
if is_polar "$SRV_CMD"; then
if grep "Performing the SSL/TLS handshake" $SRV_OUT >/dev/null; then :;
else
fail "server or client failed to reach handshake stage"
return
fi
fi
if is_polar "$CLI_CMD"; then
if grep "Performing the SSL/TLS handshake" $CLI_OUT >/dev/null; then :;
else
fail "server or client failed to reach handshake stage"
return
fi
fi
# check server exit code
if [ $? != 0 ]; then
fail "server fail"
return
fi
# check client exit code
if [ \( "$CLI_EXPECT" = 0 -a "$CLI_EXIT" != 0 \) -o \
\( "$CLI_EXPECT" != 0 -a "$CLI_EXIT" = 0 \) ]
then
fail "bad client exit code"
return
fi
# check other assertions
# lines beginning with == are added by valgrind, ignore them
while [ $# -gt 0 ]
do
case $1 in
"-s")
if grep -v '^==' $SRV_OUT | grep "$2" >/dev/null; then :; else
fail "-s $2"
return
fi
;;
"-c")
if grep -v '^==' $CLI_OUT | grep "$2" >/dev/null; then :; else
fail "-c $2"
return
fi
;;
"-S")
if grep -v '^==' $SRV_OUT | grep "$2" >/dev/null; then
fail "-S $2"
return
fi
;;
"-C")
if grep -v '^==' $CLI_OUT | grep "$2" >/dev/null; then
fail "-C $2"
return
fi
;;
*)
echo "Unknown test: $1" >&2
exit 1
esac
shift 2
done
# check valgrind's results
if [ "$MEMCHECK" -gt 0 ]; then
if is_polar "$SRV_CMD" && has_mem_err $SRV_OUT; then
fail "Server has memory errors"
return
fi
if is_polar "$CLI_CMD" && has_mem_err $CLI_OUT; then
fail "Client has memory errors"
return
fi
fi
# if we're here, everything is ok
echo "PASS"
rm -f $SRV_OUT $CLI_OUT
}
cleanup() {
rm -f $CLI_OUT $SRV_OUT $SESSION
kill $SRV_PID >/dev/null 2>&1
kill $WATCHDOG_PID >/dev/null 2>&1
exit 1
}
#
# MAIN
#
get_options "$@"
# sanity checks, avoid an avalanche of errors
if [ ! -x "$P_SRV" ]; then
echo "Command '$P_SRV' is not an executable file"
exit 1
fi
if [ ! -x "$P_CLI" ]; then
echo "Command '$P_CLI' is not an executable file"
exit 1
fi
if which $OPENSSL_CMD >/dev/null 2>&1; then :; else
echo "Command '$OPENSSL_CMD' not found"
exit 1
fi
# used by watchdog
MAIN_PID="$$"
# be more patient with valgrind
if [ "$MEMCHECK" -gt 0 ]; then
START_DELAY=3
DOG_DELAY=30
else
START_DELAY=1
DOG_DELAY=10
fi
# Pick a "unique" port in the range 10000-19999.
PORT="0000$$"
PORT="1$( printf $PORT | tail -c 4 )"
# fix commands to use this port
P_SRV="$P_SRV server_port=$PORT"
P_CLI="$P_CLI server_port=$PORT"
O_SRV="$O_SRV -accept $PORT"
O_CLI="$O_CLI -connect localhost:$PORT"
G_SRV="$G_SRV -p $PORT"
G_CLI="$G_CLI -p $PORT localhost"
# Also pick a unique name for intermediate files
SRV_OUT="srv_out.$$"
CLI_OUT="cli_out.$$"
SESSION="session.$$"
SKIP_NEXT="NO"
trap cleanup INT TERM HUP
# Basic test
# Checks that:
# - things work with all ciphersuites active (used with config-full in all.sh)
# - the expected (highest security) parameters are selected
# ("signature_algorithm ext: 6" means SHA-512 (highest common hash))
run_test "Default" \
"$P_SRV debug_level=3" \
"$P_CLI" \
0 \
-s "Protocol is TLSv1.2" \
-s "Ciphersuite is TLS-ECDHE-ECDSA-WITH-AES-256-GCM-SHA384" \
-s "client hello v3, signature_algorithm ext: 6" \
-s "ECDHE curve: secp521r1" \
-S "error" \
-C "error"
# Tests for rc4 option
run_test "RC4: server disabled, client enabled" \
"$P_SRV" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
1 \
-s "SSL - None of the common ciphersuites is usable"
run_test "RC4: server enabled, client disabled" \
"$P_SRV force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
"$P_CLI" \
1 \
-s "SSL - The server has no ciphersuites in common"
run_test "RC4: both enabled" \
"$P_SRV arc4=1" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
0 \
-S "SSL - None of the common ciphersuites is usable" \
-S "SSL - The server has no ciphersuites in common"
# Test for SSLv2 ClientHello
requires_openssl_with_sslv2
run_test "SSLv2 ClientHello: reference" \
"$P_SRV debug_level=3" \
"$O_CLI -no_ssl2" \
0 \
-S "parse client hello v2" \
-S "ssl_handshake returned"
# Adding a SSL2-only suite makes OpenSSL client send SSLv2 ClientHello
requires_openssl_with_sslv2
run_test "SSLv2 ClientHello: actual test" \
"$P_SRV debug_level=2" \
"$O_CLI -cipher 'DES-CBC-MD5:ALL'" \
0 \
-s "parse client hello v2" \
-S "ssl_handshake returned"
# Tests for Truncated HMAC extension
run_test "Truncated HMAC: client default, server default" \
"$P_SRV debug_level=4" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
0 \
-s "dumping 'computed mac' (20 bytes)" \
-S "dumping 'computed mac' (10 bytes)"
run_test "Truncated HMAC: client disabled, server default" \
"$P_SRV debug_level=4" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \
trunc_hmac=0" \
0 \
-s "dumping 'computed mac' (20 bytes)" \
-S "dumping 'computed mac' (10 bytes)"
run_test "Truncated HMAC: client enabled, server default" \
"$P_SRV debug_level=4" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \
trunc_hmac=1" \
0 \
-S "dumping 'computed mac' (20 bytes)" \
-s "dumping 'computed mac' (10 bytes)"
run_test "Truncated HMAC: client enabled, server disabled" \
"$P_SRV debug_level=4 trunc_hmac=0" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \
trunc_hmac=1" \
0 \
-s "dumping 'computed mac' (20 bytes)" \
-S "dumping 'computed mac' (10 bytes)"
run_test "Truncated HMAC: client enabled, server enabled" \
"$P_SRV debug_level=4 trunc_hmac=1" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \
trunc_hmac=1" \
0 \
-S "dumping 'computed mac' (20 bytes)" \
-s "dumping 'computed mac' (10 bytes)"
# Tests for Encrypt-then-MAC extension
run_test "Encrypt then MAC: default" \
"$P_SRV debug_level=3 \
force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
"$P_CLI debug_level=3" \
0 \
-c "client hello, adding encrypt_then_mac extension" \
-s "found encrypt then mac extension" \
-s "server hello, adding encrypt then mac extension" \
-c "found encrypt_then_mac extension" \
-c "using encrypt then mac" \
-s "using encrypt then mac"
run_test "Encrypt then MAC: client enabled, server disabled" \
"$P_SRV debug_level=3 etm=0 \
force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
"$P_CLI debug_level=3 etm=1" \
0 \
-c "client hello, adding encrypt_then_mac extension" \
-s "found encrypt then mac extension" \
-S "server hello, adding encrypt then mac extension" \
-C "found encrypt_then_mac extension" \
-C "using encrypt then mac" \
-S "using encrypt then mac"
run_test "Encrypt then MAC: client enabled, aead cipher" \
"$P_SRV debug_level=3 etm=1 \
force_ciphersuite=TLS-RSA-WITH-AES-128-GCM-SHA256" \
"$P_CLI debug_level=3 etm=1" \
0 \
-c "client hello, adding encrypt_then_mac extension" \
-s "found encrypt then mac extension" \
-S "server hello, adding encrypt then mac extension" \
-C "found encrypt_then_mac extension" \
-C "using encrypt then mac" \
-S "using encrypt then mac"
run_test "Encrypt then MAC: client enabled, stream cipher" \
"$P_SRV debug_level=3 etm=1 \
force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
"$P_CLI debug_level=3 etm=1 arc4=1" \
0 \
-c "client hello, adding encrypt_then_mac extension" \
-s "found encrypt then mac extension" \
-S "server hello, adding encrypt then mac extension" \
-C "found encrypt_then_mac extension" \
-C "using encrypt then mac" \
-S "using encrypt then mac"
run_test "Encrypt then MAC: client disabled, server enabled" \
"$P_SRV debug_level=3 etm=1 \
force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
"$P_CLI debug_level=3 etm=0" \
0 \
-C "client hello, adding encrypt_then_mac extension" \
-S "found encrypt then mac extension" \
-S "server hello, adding encrypt then mac extension" \
-C "found encrypt_then_mac extension" \
-C "using encrypt then mac" \
-S "using encrypt then mac"
run_test "Encrypt then MAC: client SSLv3, server enabled" \
"$P_SRV debug_level=3 min_version=ssl3 \
force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
"$P_CLI debug_level=3 force_version=ssl3" \
0 \
-C "client hello, adding encrypt_then_mac extension" \
-S "found encrypt then mac extension" \
-S "server hello, adding encrypt then mac extension" \
-C "found encrypt_then_mac extension" \
-C "using encrypt then mac" \
-S "using encrypt then mac"
run_test "Encrypt then MAC: client enabled, server SSLv3" \
"$P_SRV debug_level=3 force_version=ssl3 \
force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
"$P_CLI debug_level=3 min_version=ssl3" \
0 \
-c "client hello, adding encrypt_then_mac extension" \
-s "found encrypt then mac extension" \
-S "server hello, adding encrypt then mac extension" \
-C "found encrypt_then_mac extension" \
-C "using encrypt then mac" \
-S "using encrypt then mac"
# Tests for Extended Master Secret extension
run_test "Extended Master Secret: default" \
"$P_SRV debug_level=3" \
"$P_CLI debug_level=3" \
0 \
-c "client hello, adding extended_master_secret extension" \
-s "found extended master secret extension" \
-s "server hello, adding extended master secret extension" \
-c "found extended_master_secret extension" \
-c "using extended master secret" \
-s "using extended master secret"
run_test "Extended Master Secret: client enabled, server disabled" \
"$P_SRV debug_level=3 extended_ms=0" \
"$P_CLI debug_level=3 extended_ms=1" \
0 \
-c "client hello, adding extended_master_secret extension" \
-s "found extended master secret extension" \
-S "server hello, adding extended master secret extension" \
-C "found extended_master_secret extension" \
-C "using extended master secret" \
-S "using extended master secret"
run_test "Extended Master Secret: client disabled, server enabled" \
"$P_SRV debug_level=3 extended_ms=1" \
"$P_CLI debug_level=3 extended_ms=0" \
0 \
-C "client hello, adding extended_master_secret extension" \
-S "found extended master secret extension" \
-S "server hello, adding extended master secret extension" \
-C "found extended_master_secret extension" \
-C "using extended master secret" \
-S "using extended master secret"
run_test "Extended Master Secret: client SSLv3, server enabled" \
"$P_SRV debug_level=3 min_version=ssl3" \
"$P_CLI debug_level=3 force_version=ssl3" \
0 \
-C "client hello, adding extended_master_secret extension" \
-S "found extended master secret extension" \
-S "server hello, adding extended master secret extension" \
-C "found extended_master_secret extension" \
-C "using extended master secret" \
-S "using extended master secret"
run_test "Extended Master Secret: client enabled, server SSLv3" \
"$P_SRV debug_level=3 force_version=ssl3" \
"$P_CLI debug_level=3 min_version=ssl3" \
0 \
-c "client hello, adding extended_master_secret extension" \
-s "found extended master secret extension" \
-S "server hello, adding extended master secret extension" \
-C "found extended_master_secret extension" \
-C "using extended master secret" \
-S "using extended master secret"
# Tests for FALLBACK_SCSV
run_test "Fallback SCSV: default" \
"$P_SRV" \
"$P_CLI debug_level=3 force_version=tls1_1" \
0 \
-C "adding FALLBACK_SCSV" \
-S "received FALLBACK_SCSV" \
-S "inapropriate fallback" \
-C "is a fatal alert message (msg 86)"
run_test "Fallback SCSV: explicitly disabled" \
"$P_SRV" \
"$P_CLI debug_level=3 force_version=tls1_1 fallback=0" \
0 \
-C "adding FALLBACK_SCSV" \
-S "received FALLBACK_SCSV" \
-S "inapropriate fallback" \
-C "is a fatal alert message (msg 86)"
run_test "Fallback SCSV: enabled" \
"$P_SRV" \
"$P_CLI debug_level=3 force_version=tls1_1 fallback=1" \
1 \
-c "adding FALLBACK_SCSV" \
-s "received FALLBACK_SCSV" \
-s "inapropriate fallback" \
-c "is a fatal alert message (msg 86)"
run_test "Fallback SCSV: enabled, max version" \
"$P_SRV" \
"$P_CLI debug_level=3 fallback=1" \
0 \
-c "adding FALLBACK_SCSV" \
-s "received FALLBACK_SCSV" \
-S "inapropriate fallback" \
-C "is a fatal alert message (msg 86)"
requires_openssl_with_fallback_scsv
run_test "Fallback SCSV: default, openssl server" \
"$O_SRV" \
"$P_CLI debug_level=3 force_version=tls1_1 fallback=0" \
0 \
-C "adding FALLBACK_SCSV" \
-C "is a fatal alert message (msg 86)"
requires_openssl_with_fallback_scsv
run_test "Fallback SCSV: enabled, openssl server" \
"$O_SRV" \
"$P_CLI debug_level=3 force_version=tls1_1 fallback=1" \
1 \
-c "adding FALLBACK_SCSV" \
-c "is a fatal alert message (msg 86)"
requires_openssl_with_fallback_scsv
run_test "Fallback SCSV: disabled, openssl client" \
"$P_SRV" \
"$O_CLI -tls1_1" \
0 \
-S "received FALLBACK_SCSV" \
-S "inapropriate fallback"
requires_openssl_with_fallback_scsv
run_test "Fallback SCSV: enabled, openssl client" \
"$P_SRV" \
"$O_CLI -tls1_1 -fallback_scsv" \
1 \
-s "received FALLBACK_SCSV" \
-s "inapropriate fallback"
requires_openssl_with_fallback_scsv
run_test "Fallback SCSV: enabled, max version, openssl client" \
"$P_SRV" \
"$O_CLI -fallback_scsv" \
0 \
-s "received FALLBACK_SCSV" \
-S "inapropriate fallback"
# Tests for CBC 1/n-1 record splitting
run_test "CBC Record splitting: TLS 1.2, no splitting" \
"$P_SRV" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \
request_size=123 force_version=tls1_2" \
0 \
-s "Read from client: 123 bytes read" \
-S "Read from client: 1 bytes read" \
-S "122 bytes read"
run_test "CBC Record splitting: TLS 1.1, no splitting" \
"$P_SRV" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \
request_size=123 force_version=tls1_1" \
0 \
-s "Read from client: 123 bytes read" \
-S "Read from client: 1 bytes read" \
-S "122 bytes read"
run_test "CBC Record splitting: TLS 1.0, splitting" \
"$P_SRV" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \
request_size=123 force_version=tls1" \
0 \
-S "Read from client: 123 bytes read" \
-s "Read from client: 1 bytes read" \
-s "122 bytes read"
run_test "CBC Record splitting: SSLv3, splitting" \
"$P_SRV min_version=ssl3" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \
request_size=123 force_version=ssl3" \
0 \
-S "Read from client: 123 bytes read" \
-s "Read from client: 1 bytes read" \
-s "122 bytes read"
run_test "CBC Record splitting: TLS 1.0 RC4, no splitting" \
"$P_SRV arc4=1" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \
request_size=123 force_version=tls1" \
0 \
-s "Read from client: 123 bytes read" \
-S "Read from client: 1 bytes read" \
-S "122 bytes read"
run_test "CBC Record splitting: TLS 1.0, splitting disabled" \
"$P_SRV" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \
request_size=123 force_version=tls1 recsplit=0" \
0 \
-s "Read from client: 123 bytes read" \
-S "Read from client: 1 bytes read" \
-S "122 bytes read"
run_test "CBC Record splitting: TLS 1.0, splitting, nbio" \
"$P_SRV nbio=2" \
"$P_CLI nbio=2 force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \
request_size=123 force_version=tls1" \
0 \
-S "Read from client: 123 bytes read" \
-s "Read from client: 1 bytes read" \
-s "122 bytes read"
# Tests for Session Tickets
run_test "Session resume using tickets: basic" \
"$P_SRV debug_level=3 tickets=1" \
"$P_CLI debug_level=3 tickets=1 reconnect=1" \
0 \
-c "client hello, adding session ticket extension" \
-s "found session ticket extension" \
-s "server hello, adding session ticket extension" \
-c "found session_ticket extension" \
-c "parse new session ticket" \
-S "session successfully restored from cache" \
-s "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
run_test "Session resume using tickets: cache disabled" \
"$P_SRV debug_level=3 tickets=1 cache_max=0" \
"$P_CLI debug_level=3 tickets=1 reconnect=1" \
0 \
-c "client hello, adding session ticket extension" \
-s "found session ticket extension" \
-s "server hello, adding session ticket extension" \
-c "found session_ticket extension" \
-c "parse new session ticket" \
-S "session successfully restored from cache" \
-s "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
run_test "Session resume using tickets: timeout" \
"$P_SRV debug_level=3 tickets=1 cache_max=0 ticket_timeout=1" \
"$P_CLI debug_level=3 tickets=1 reconnect=1 reco_delay=2" \
0 \
-c "client hello, adding session ticket extension" \
-s "found session ticket extension" \
-s "server hello, adding session ticket extension" \
-c "found session_ticket extension" \
-c "parse new session ticket" \
-S "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-S "a session has been resumed" \
-C "a session has been resumed"
run_test "Session resume using tickets: openssl server" \
"$O_SRV" \
"$P_CLI debug_level=3 tickets=1 reconnect=1" \
0 \
-c "client hello, adding session ticket extension" \
-c "found session_ticket extension" \
-c "parse new session ticket" \
-c "a session has been resumed"
run_test "Session resume using tickets: openssl client" \
"$P_SRV debug_level=3 tickets=1" \
"( $O_CLI -sess_out $SESSION; \
$O_CLI -sess_in $SESSION; \
rm -f $SESSION )" \
0 \
-s "found session ticket extension" \
-s "server hello, adding session ticket extension" \
-S "session successfully restored from cache" \
-s "session successfully restored from ticket" \
-s "a session has been resumed"
# Tests for Session Resume based on session-ID and cache
run_test "Session resume using cache: tickets enabled on client" \
"$P_SRV debug_level=3 tickets=0" \
"$P_CLI debug_level=3 tickets=1 reconnect=1" \
0 \
-c "client hello, adding session ticket extension" \
-s "found session ticket extension" \
-S "server hello, adding session ticket extension" \
-C "found session_ticket extension" \
-C "parse new session ticket" \
-s "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
run_test "Session resume using cache: tickets enabled on server" \
"$P_SRV debug_level=3 tickets=1" \
"$P_CLI debug_level=3 tickets=0 reconnect=1" \
0 \
-C "client hello, adding session ticket extension" \
-S "found session ticket extension" \
-S "server hello, adding session ticket extension" \
-C "found session_ticket extension" \
-C "parse new session ticket" \
-s "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
run_test "Session resume using cache: cache_max=0" \
"$P_SRV debug_level=3 tickets=0 cache_max=0" \
"$P_CLI debug_level=3 tickets=0 reconnect=1" \
0 \
-S "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-S "a session has been resumed" \
-C "a session has been resumed"
run_test "Session resume using cache: cache_max=1" \
"$P_SRV debug_level=3 tickets=0 cache_max=1" \
"$P_CLI debug_level=3 tickets=0 reconnect=1" \
0 \
-s "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
run_test "Session resume using cache: timemout > delay" \
"$P_SRV debug_level=3 tickets=0" \
"$P_CLI debug_level=3 tickets=0 reconnect=1 reco_delay=0" \
0 \
-s "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
run_test "Session resume using cache: timeout < delay" \
"$P_SRV debug_level=3 tickets=0 cache_timeout=1" \
"$P_CLI debug_level=3 tickets=0 reconnect=1 reco_delay=2" \
0 \
-S "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-S "a session has been resumed" \
-C "a session has been resumed"
run_test "Session resume using cache: no timeout" \
"$P_SRV debug_level=3 tickets=0 cache_timeout=0" \
"$P_CLI debug_level=3 tickets=0 reconnect=1 reco_delay=2" \
0 \
-s "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
run_test "Session resume using cache: openssl client" \
"$P_SRV debug_level=3 tickets=0" \
"( $O_CLI -sess_out $SESSION; \
$O_CLI -sess_in $SESSION; \
rm -f $SESSION )" \
0 \
-s "found session ticket extension" \
-S "server hello, adding session ticket extension" \
-s "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-s "a session has been resumed"
run_test "Session resume using cache: openssl server" \
"$O_SRV" \
"$P_CLI debug_level=3 tickets=0 reconnect=1" \
0 \
-C "found session_ticket extension" \
-C "parse new session ticket" \
-c "a session has been resumed"
# Tests for Max Fragment Length extension
run_test "Max fragment length: not used, reference" \
"$P_SRV debug_level=3" \
"$P_CLI debug_level=3" \
0 \
-C "client hello, adding max_fragment_length extension" \
-S "found max fragment length extension" \
-S "server hello, max_fragment_length extension" \
-C "found max_fragment_length extension"
run_test "Max fragment length: used by client" \
"$P_SRV debug_level=3" \
"$P_CLI debug_level=3 max_frag_len=4096" \
0 \
-c "client hello, adding max_fragment_length extension" \
-s "found max fragment length extension" \
-s "server hello, max_fragment_length extension" \
-c "found max_fragment_length extension"
run_test "Max fragment length: used by server" \
"$P_SRV debug_level=3 max_frag_len=4096" \
"$P_CLI debug_level=3" \
0 \
-C "client hello, adding max_fragment_length extension" \
-S "found max fragment length extension" \
-S "server hello, max_fragment_length extension" \
-C "found max_fragment_length extension"
requires_gnutls
run_test "Max fragment length: gnutls server" \
"$G_SRV" \
"$P_CLI debug_level=3 max_frag_len=4096" \
0 \
-c "client hello, adding max_fragment_length extension" \
-c "found max_fragment_length extension"
# Tests for renegotiation
run_test "Renegotiation: none, for reference" \
"$P_SRV debug_level=3 exchanges=2" \
"$P_CLI debug_level=3 exchanges=2" \
0 \
-C "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-S "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-C "=> renegotiate" \
-S "=> renegotiate" \
-S "write hello request"
run_test "Renegotiation: client-initiated" \
"$P_SRV debug_level=3 exchanges=2 renegotiation=1" \
"$P_CLI debug_level=3 exchanges=2 renegotiation=1 renegotiate=1" \
0 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-s "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-s "=> renegotiate" \
-S "write hello request"
run_test "Renegotiation: server-initiated" \
"$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1" \
"$P_CLI debug_level=3 exchanges=2 renegotiation=1" \
0 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-s "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-s "=> renegotiate" \
-s "write hello request"
run_test "Renegotiation: double" \
"$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1" \
"$P_CLI debug_level=3 exchanges=2 renegotiation=1 renegotiate=1" \
0 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-s "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-s "=> renegotiate" \
-s "write hello request"
run_test "Renegotiation: client-initiated, server-rejected" \
"$P_SRV debug_level=3 exchanges=2 renegotiation=0" \
"$P_CLI debug_level=3 exchanges=2 renegotiation=1 renegotiate=1" \
1 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-S "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-S "=> renegotiate" \
-S "write hello request" \
-c "SSL - Unexpected message at ServerHello in renegotiation" \
-c "failed"
run_test "Renegotiation: server-initiated, client-rejected, default" \
"$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1" \
"$P_CLI debug_level=3 exchanges=2 renegotiation=0" \
0 \
-C "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-S "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-C "=> renegotiate" \
-S "=> renegotiate" \
-s "write hello request" \
-S "SSL - An unexpected message was received from our peer" \
-S "failed"
run_test "Renegotiation: server-initiated, client-rejected, not enforced" \
"$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1 \
renego_delay=-1" \
"$P_CLI debug_level=3 exchanges=2 renegotiation=0" \
0 \
-C "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-S "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-C "=> renegotiate" \
-S "=> renegotiate" \
-s "write hello request" \
-S "SSL - An unexpected message was received from our peer" \
-S "failed"
# delay 2 for 1 alert record + 1 application data record
run_test "Renegotiation: server-initiated, client-rejected, delay 2" \
"$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1 \
renego_delay=2" \
"$P_CLI debug_level=3 exchanges=2 renegotiation=0" \
0 \
-C "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-S "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-C "=> renegotiate" \
-S "=> renegotiate" \
-s "write hello request" \
-S "SSL - An unexpected message was received from our peer" \
-S "failed"
run_test "Renegotiation: server-initiated, client-rejected, delay 0" \
"$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1 \
renego_delay=0" \
"$P_CLI debug_level=3 exchanges=2 renegotiation=0" \
0 \
-C "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-S "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-C "=> renegotiate" \
-S "=> renegotiate" \
-s "write hello request" \
-s "SSL - An unexpected message was received from our peer"
run_test "Renegotiation: server-initiated, client-accepted, delay 0" \
"$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1 \
renego_delay=0" \
"$P_CLI debug_level=3 exchanges=2 renegotiation=1" \
0 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-s "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-s "=> renegotiate" \
-s "write hello request" \
-S "SSL - An unexpected message was received from our peer" \
-S "failed"
run_test "Renegotiation: periodic, just below period" \
"$P_SRV debug_level=3 exchanges=9 renegotiation=1 renego_period=3" \
"$P_CLI debug_level=3 exchanges=2 renegotiation=1" \
0 \
-C "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-S "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-S "record counter limit reached: renegotiate" \
-C "=> renegotiate" \
-S "=> renegotiate" \
-S "write hello request" \
-S "SSL - An unexpected message was received from our peer" \
-S "failed"
# one extra exchange to be able to complete renego
run_test "Renegotiation: periodic, just above period" \
"$P_SRV debug_level=3 exchanges=9 renegotiation=1 renego_period=3" \
"$P_CLI debug_level=3 exchanges=4 renegotiation=1" \
0 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-s "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-s "record counter limit reached: renegotiate" \
-c "=> renegotiate" \
-s "=> renegotiate" \
-s "write hello request" \
-S "SSL - An unexpected message was received from our peer" \
-S "failed"
run_test "Renegotiation: periodic, two times period" \
"$P_SRV debug_level=3 exchanges=9 renegotiation=1 renego_period=3" \
"$P_CLI debug_level=3 exchanges=7 renegotiation=1" \
0 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-s "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-s "record counter limit reached: renegotiate" \
-c "=> renegotiate" \
-s "=> renegotiate" \
-s "write hello request" \
-S "SSL - An unexpected message was received from our peer" \
-S "failed"
run_test "Renegotiation: periodic, above period, disabled" \
"$P_SRV debug_level=3 exchanges=9 renegotiation=0 renego_period=3" \
"$P_CLI debug_level=3 exchanges=4 renegotiation=1" \
0 \
-C "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-S "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-S "record counter limit reached: renegotiate" \
-C "=> renegotiate" \
-S "=> renegotiate" \
-S "write hello request" \
-S "SSL - An unexpected message was received from our peer" \
-S "failed"
run_test "Renegotiation: nbio, client-initiated" \
"$P_SRV debug_level=3 nbio=2 exchanges=2 renegotiation=1" \
"$P_CLI debug_level=3 nbio=2 exchanges=2 renegotiation=1 renegotiate=1" \
0 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-s "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-s "=> renegotiate" \
-S "write hello request"
run_test "Renegotiation: nbio, server-initiated" \
"$P_SRV debug_level=3 nbio=2 exchanges=2 renegotiation=1 renegotiate=1" \
"$P_CLI debug_level=3 nbio=2 exchanges=2 renegotiation=1" \
0 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-s "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-s "=> renegotiate" \
-s "write hello request"
run_test "Renegotiation: openssl server, client-initiated" \
"$O_SRV" \
"$P_CLI debug_level=3 exchanges=1 renegotiation=1 renegotiate=1" \
0 \
-c "client hello, adding renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-C "ssl_hanshake() returned" \
-C "error" \
-c "HTTP/1.0 200 [Oo][Kk]"
run_test "Renegotiation: gnutls server strict, client-initiated" \
"$G_SRV --priority=NORMAL:%SAFE_RENEGOTIATION" \
"$P_CLI debug_level=3 exchanges=1 renegotiation=1 renegotiate=1" \
0 \
-c "client hello, adding renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-C "ssl_hanshake() returned" \
-C "error" \
-c "HTTP/1.0 200 [Oo][Kk]"
run_test "Renegotiation: gnutls server unsafe, client-initiated default" \
"$G_SRV --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \
"$P_CLI debug_level=3 exchanges=1 renegotiation=1 renegotiate=1" \
1 \
-c "client hello, adding renegotiation extension" \
-C "found renegotiation extension" \
-c "=> renegotiate" \
-c "ssl_handshake() returned" \
-c "error" \
-C "HTTP/1.0 200 [Oo][Kk]"
run_test "Renegotiation: gnutls server unsafe, client-inititated no legacy" \
"$G_SRV --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \
"$P_CLI debug_level=3 exchanges=1 renegotiation=1 renegotiate=1 \
allow_legacy=0" \
1 \
-c "client hello, adding renegotiation extension" \
-C "found renegotiation extension" \
-c "=> renegotiate" \
-c "ssl_handshake() returned" \
-c "error" \
-C "HTTP/1.0 200 [Oo][Kk]"
run_test "Renegotiation: gnutls server unsafe, client-inititated legacy" \
"$G_SRV --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \
"$P_CLI debug_level=3 exchanges=1 renegotiation=1 renegotiate=1 \
allow_legacy=1" \
0 \
-c "client hello, adding renegotiation extension" \
-C "found renegotiation extension" \
-c "=> renegotiate" \
-C "ssl_hanshake() returned" \
-C "error" \
-c "HTTP/1.0 200 [Oo][Kk]"
# Test for the "secure renegotation" extension only (no actual renegotiation)
run_test "Renego ext: gnutls server strict, client default" \
"$G_SRV --priority=NORMAL:%SAFE_RENEGOTIATION" \
"$P_CLI debug_level=3" \
0 \
-c "found renegotiation extension" \
-C "error" \
-c "HTTP/1.0 200 [Oo][Kk]"
run_test "Renego ext: gnutls server unsafe, client default" \
"$G_SRV --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \
"$P_CLI debug_level=3" \
0 \
-C "found renegotiation extension" \
-C "error" \
-c "HTTP/1.0 200 [Oo][Kk]"
run_test "Renego ext: gnutls server unsafe, client break legacy" \
"$G_SRV --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \
"$P_CLI debug_level=3 allow_legacy=-1" \
1 \
-C "found renegotiation extension" \
-c "error" \
-C "HTTP/1.0 200 [Oo][Kk]"
run_test "Renego ext: gnutls client strict, server default" \
"$P_SRV debug_level=3" \
"$G_CLI --priority=NORMAL:%SAFE_RENEGOTIATION" \
0 \
-s "received TLS_EMPTY_RENEGOTIATION_INFO\|found renegotiation extension" \
-s "server hello, secure renegotiation extension"
run_test "Renego ext: gnutls client unsafe, server default" \
"$P_SRV debug_level=3" \
"$G_CLI --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \
0 \
-S "received TLS_EMPTY_RENEGOTIATION_INFO\|found renegotiation extension" \
-S "server hello, secure renegotiation extension"
run_test "Renego ext: gnutls client unsafe, server break legacy" \
"$P_SRV debug_level=3 allow_legacy=-1" \
"$G_CLI --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \
1 \
-S "received TLS_EMPTY_RENEGOTIATION_INFO\|found renegotiation extension" \
-S "server hello, secure renegotiation extension"
# Tests for auth_mode
run_test "Authentication: server badcert, client required" \
"$P_SRV crt_file=data_files/server5-badsign.crt \
key_file=data_files/server5.key" \
"$P_CLI debug_level=1 auth_mode=required" \
1 \
-c "x509_verify_cert() returned" \
-c "! self-signed or not signed by a trusted CA" \
-c "! ssl_handshake returned" \
-c "X509 - Certificate verification failed"
run_test "Authentication: server badcert, client optional" \
"$P_SRV crt_file=data_files/server5-badsign.crt \
key_file=data_files/server5.key" \
"$P_CLI debug_level=1 auth_mode=optional" \
0 \
-c "x509_verify_cert() returned" \
-c "! self-signed or not signed by a trusted CA" \
-C "! ssl_handshake returned" \
-C "X509 - Certificate verification failed"
run_test "Authentication: server badcert, client none" \
"$P_SRV crt_file=data_files/server5-badsign.crt \
key_file=data_files/server5.key" \
"$P_CLI debug_level=1 auth_mode=none" \
0 \
-C "x509_verify_cert() returned" \
-C "! self-signed or not signed by a trusted CA" \
-C "! ssl_handshake returned" \
-C "X509 - Certificate verification failed"
run_test "Authentication: client badcert, server required" \
"$P_SRV debug_level=3 auth_mode=required" \
"$P_CLI debug_level=3 crt_file=data_files/server5-badsign.crt \
key_file=data_files/server5.key" \
1 \
-S "skip write certificate request" \
-C "skip parse certificate request" \
-c "got a certificate request" \
-C "skip write certificate" \
-C "skip write certificate verify" \
-S "skip parse certificate verify" \
-s "x509_verify_cert() returned" \
-S "! self-signed or not signed by a trusted CA" \
-s "! ssl_handshake returned" \
-c "! ssl_handshake returned" \
-s "X509 - Certificate verification failed"
run_test "Authentication: client badcert, server optional" \
"$P_SRV debug_level=3 auth_mode=optional" \
"$P_CLI debug_level=3 crt_file=data_files/server5-badsign.crt \
key_file=data_files/server5.key" \
0 \
-S "skip write certificate request" \
-C "skip parse certificate request" \
-c "got a certificate request" \
-C "skip write certificate" \
-C "skip write certificate verify" \
-S "skip parse certificate verify" \
-s "x509_verify_cert() returned" \
-s "! self-signed or not signed by a trusted CA" \
-S "! ssl_handshake returned" \
-C "! ssl_handshake returned" \
-S "X509 - Certificate verification failed"
run_test "Authentication: client badcert, server none" \
"$P_SRV debug_level=3 auth_mode=none" \
"$P_CLI debug_level=3 crt_file=data_files/server5-badsign.crt \
key_file=data_files/server5.key" \
0 \
-s "skip write certificate request" \
-C "skip parse certificate request" \
-c "got no certificate request" \
-c "skip write certificate" \
-c "skip write certificate verify" \
-s "skip parse certificate verify" \
-S "x509_verify_cert() returned" \
-S "! self-signed or not signed by a trusted CA" \
-S "! ssl_handshake returned" \
-C "! ssl_handshake returned" \
-S "X509 - Certificate verification failed"
run_test "Authentication: client no cert, server optional" \
"$P_SRV debug_level=3 auth_mode=optional" \
"$P_CLI debug_level=3 crt_file=none key_file=none" \
0 \
-S "skip write certificate request" \
-C "skip parse certificate request" \
-c "got a certificate request" \
-C "skip write certificate$" \
-C "got no certificate to send" \
-S "SSLv3 client has no certificate" \
-c "skip write certificate verify" \
-s "skip parse certificate verify" \
-s "! no client certificate sent" \
-S "! ssl_handshake returned" \
-C "! ssl_handshake returned" \
-S "X509 - Certificate verification failed"
run_test "Authentication: openssl client no cert, server optional" \
"$P_SRV debug_level=3 auth_mode=optional" \
"$O_CLI" \
0 \
-S "skip write certificate request" \
-s "skip parse certificate verify" \
-s "! no client certificate sent" \
-S "! ssl_handshake returned" \
-S "X509 - Certificate verification failed"
run_test "Authentication: client no cert, openssl server optional" \
"$O_SRV -verify 10" \
"$P_CLI debug_level=3 crt_file=none key_file=none" \
0 \
-C "skip parse certificate request" \
-c "got a certificate request" \
-C "skip write certificate$" \
-c "skip write certificate verify" \
-C "! ssl_handshake returned"
run_test "Authentication: client no cert, ssl3" \
"$P_SRV debug_level=3 auth_mode=optional force_version=ssl3" \
"$P_CLI debug_level=3 crt_file=none key_file=none min_version=ssl3" \
0 \
-S "skip write certificate request" \
-C "skip parse certificate request" \
-c "got a certificate request" \
-C "skip write certificate$" \
-c "skip write certificate verify" \
-c "got no certificate to send" \
-s "SSLv3 client has no certificate" \
-s "skip parse certificate verify" \
-s "! no client certificate sent" \
-S "! ssl_handshake returned" \
-C "! ssl_handshake returned" \
-S "X509 - Certificate verification failed"
# Tests for certificate selection based on SHA verson
run_test "Certificate hash: client TLS 1.2 -> SHA-2" \
"$P_SRV crt_file=data_files/server5.crt \
key_file=data_files/server5.key \
crt_file2=data_files/server5-sha1.crt \
key_file2=data_files/server5.key" \
"$P_CLI force_version=tls1_2" \
0 \
-c "signed using.*ECDSA with SHA256" \
-C "signed using.*ECDSA with SHA1"
run_test "Certificate hash: client TLS 1.1 -> SHA-1" \
"$P_SRV crt_file=data_files/server5.crt \
key_file=data_files/server5.key \
crt_file2=data_files/server5-sha1.crt \
key_file2=data_files/server5.key" \
"$P_CLI force_version=tls1_1" \
0 \
-C "signed using.*ECDSA with SHA256" \
-c "signed using.*ECDSA with SHA1"
run_test "Certificate hash: client TLS 1.0 -> SHA-1" \
"$P_SRV crt_file=data_files/server5.crt \
key_file=data_files/server5.key \
crt_file2=data_files/server5-sha1.crt \
key_file2=data_files/server5.key" \
"$P_CLI force_version=tls1" \
0 \
-C "signed using.*ECDSA with SHA256" \
-c "signed using.*ECDSA with SHA1"
run_test "Certificate hash: client TLS 1.1, no SHA-1 -> SHA-2 (order 1)" \
"$P_SRV crt_file=data_files/server5.crt \
key_file=data_files/server5.key \
crt_file2=data_files/server6.crt \
key_file2=data_files/server6.key" \
"$P_CLI force_version=tls1_1" \
0 \
-c "serial number.*09" \
-c "signed using.*ECDSA with SHA256" \
-C "signed using.*ECDSA with SHA1"
run_test "Certificate hash: client TLS 1.1, no SHA-1 -> SHA-2 (order 2)" \
"$P_SRV crt_file=data_files/server6.crt \
key_file=data_files/server6.key \
crt_file2=data_files/server5.crt \
key_file2=data_files/server5.key" \
"$P_CLI force_version=tls1_1" \
0 \
-c "serial number.*0A" \
-c "signed using.*ECDSA with SHA256" \
-C "signed using.*ECDSA with SHA1"
# tests for SNI
run_test "SNI: no SNI callback" \
"$P_SRV debug_level=3 server_addr=127.0.0.1 \
crt_file=data_files/server5.crt key_file=data_files/server5.key" \
"$P_CLI debug_level=0 server_addr=127.0.0.1 \
server_name=localhost" \
0 \
-S "parse ServerName extension" \
-c "issuer name *: C=NL, O=PolarSSL, CN=Polarssl Test EC CA" \
-c "subject name *: C=NL, O=PolarSSL, CN=localhost"
run_test "SNI: matching cert 1" \
"$P_SRV debug_level=3 server_addr=127.0.0.1 \
crt_file=data_files/server5.crt key_file=data_files/server5.key \
sni=localhost,data_files/server2.crt,data_files/server2.key,polarssl.example,data_files/server1-nospace.crt,data_files/server1.key" \
"$P_CLI debug_level=0 server_addr=127.0.0.1 \
server_name=localhost" \
0 \
-s "parse ServerName extension" \
-c "issuer name *: C=NL, O=PolarSSL, CN=PolarSSL Test CA" \
-c "subject name *: C=NL, O=PolarSSL, CN=localhost"
run_test "SNI: matching cert 2" \
"$P_SRV debug_level=3 server_addr=127.0.0.1 \
crt_file=data_files/server5.crt key_file=data_files/server5.key \
sni=localhost,data_files/server2.crt,data_files/server2.key,polarssl.example,data_files/server1-nospace.crt,data_files/server1.key" \
"$P_CLI debug_level=0 server_addr=127.0.0.1 \
server_name=polarssl.example" \
0 \
-s "parse ServerName extension" \
-c "issuer name *: C=NL, O=PolarSSL, CN=PolarSSL Test CA" \
-c "subject name *: C=NL, O=PolarSSL, CN=polarssl.example"
run_test "SNI: no matching cert" \
"$P_SRV debug_level=3 server_addr=127.0.0.1 \
crt_file=data_files/server5.crt key_file=data_files/server5.key \
sni=localhost,data_files/server2.crt,data_files/server2.key,polarssl.example,data_files/server1-nospace.crt,data_files/server1.key" \
"$P_CLI debug_level=0 server_addr=127.0.0.1 \
server_name=nonesuch.example" \
1 \
-s "parse ServerName extension" \
-s "ssl_sni_wrapper() returned" \
-s "ssl_handshake returned" \
-c "ssl_handshake returned" \
-c "SSL - A fatal alert message was received from our peer"
# Tests for non-blocking I/O: exercise a variety of handshake flows
run_test "Non-blocking I/O: basic handshake" \
"$P_SRV nbio=2 tickets=0 auth_mode=none" \
"$P_CLI nbio=2 tickets=0" \
0 \
-S "ssl_handshake returned" \
-C "ssl_handshake returned" \
-c "Read from server: .* bytes read"
run_test "Non-blocking I/O: client auth" \
"$P_SRV nbio=2 tickets=0 auth_mode=required" \
"$P_CLI nbio=2 tickets=0" \
0 \
-S "ssl_handshake returned" \
-C "ssl_handshake returned" \
-c "Read from server: .* bytes read"
run_test "Non-blocking I/O: ticket" \
"$P_SRV nbio=2 tickets=1 auth_mode=none" \
"$P_CLI nbio=2 tickets=1" \
0 \
-S "ssl_handshake returned" \
-C "ssl_handshake returned" \
-c "Read from server: .* bytes read"
run_test "Non-blocking I/O: ticket + client auth" \
"$P_SRV nbio=2 tickets=1 auth_mode=required" \
"$P_CLI nbio=2 tickets=1" \
0 \
-S "ssl_handshake returned" \
-C "ssl_handshake returned" \
-c "Read from server: .* bytes read"
run_test "Non-blocking I/O: ticket + client auth + resume" \
"$P_SRV nbio=2 tickets=1 auth_mode=required" \
"$P_CLI nbio=2 tickets=1 reconnect=1" \
0 \
-S "ssl_handshake returned" \
-C "ssl_handshake returned" \
-c "Read from server: .* bytes read"
run_test "Non-blocking I/O: ticket + resume" \
"$P_SRV nbio=2 tickets=1 auth_mode=none" \
"$P_CLI nbio=2 tickets=1 reconnect=1" \
0 \
-S "ssl_handshake returned" \
-C "ssl_handshake returned" \
-c "Read from server: .* bytes read"
run_test "Non-blocking I/O: session-id resume" \
"$P_SRV nbio=2 tickets=0 auth_mode=none" \
"$P_CLI nbio=2 tickets=0 reconnect=1" \
0 \
-S "ssl_handshake returned" \
-C "ssl_handshake returned" \
-c "Read from server: .* bytes read"
# Tests for version negotiation
run_test "Version check: all -> 1.2" \
"$P_SRV" \
"$P_CLI" \
0 \
-S "ssl_handshake returned" \
-C "ssl_handshake returned" \
-s "Protocol is TLSv1.2" \
-c "Protocol is TLSv1.2"
run_test "Version check: cli max 1.1 -> 1.1" \
"$P_SRV" \
"$P_CLI max_version=tls1_1" \
0 \
-S "ssl_handshake returned" \
-C "ssl_handshake returned" \
-s "Protocol is TLSv1.1" \
-c "Protocol is TLSv1.1"
run_test "Version check: srv max 1.1 -> 1.1" \
"$P_SRV max_version=tls1_1" \
"$P_CLI" \
0 \
-S "ssl_handshake returned" \
-C "ssl_handshake returned" \
-s "Protocol is TLSv1.1" \
-c "Protocol is TLSv1.1"
run_test "Version check: cli+srv max 1.1 -> 1.1" \
"$P_SRV max_version=tls1_1" \
"$P_CLI max_version=tls1_1" \
0 \
-S "ssl_handshake returned" \
-C "ssl_handshake returned" \
-s "Protocol is TLSv1.1" \
-c "Protocol is TLSv1.1"
run_test "Version check: cli max 1.1, srv min 1.1 -> 1.1" \
"$P_SRV min_version=tls1_1" \
"$P_CLI max_version=tls1_1" \
0 \
-S "ssl_handshake returned" \
-C "ssl_handshake returned" \
-s "Protocol is TLSv1.1" \
-c "Protocol is TLSv1.1"
run_test "Version check: cli min 1.1, srv max 1.1 -> 1.1" \
"$P_SRV max_version=tls1_1" \
"$P_CLI min_version=tls1_1" \
0 \
-S "ssl_handshake returned" \
-C "ssl_handshake returned" \
-s "Protocol is TLSv1.1" \
-c "Protocol is TLSv1.1"
run_test "Version check: cli min 1.2, srv max 1.1 -> fail" \
"$P_SRV max_version=tls1_1" \
"$P_CLI min_version=tls1_2" \
1 \
-s "ssl_handshake returned" \
-c "ssl_handshake returned" \
-c "SSL - Handshake protocol not within min/max boundaries"
run_test "Version check: srv min 1.2, cli max 1.1 -> fail" \
"$P_SRV min_version=tls1_2" \
"$P_CLI max_version=tls1_1" \
1 \
-s "ssl_handshake returned" \
-c "ssl_handshake returned" \
-s "SSL - Handshake protocol not within min/max boundaries"
# Tests for ALPN extension
if grep '^#define POLARSSL_SSL_ALPN' $CONFIG_H >/dev/null; then
run_test "ALPN: none" \
"$P_SRV debug_level=3" \
"$P_CLI debug_level=3" \
0 \
-C "client hello, adding alpn extension" \
-S "found alpn extension" \
-C "got an alert message, type: \\[2:120]" \
-S "server hello, adding alpn extension" \
-C "found alpn extension " \
-C "Application Layer Protocol is" \
-S "Application Layer Protocol is"
run_test "ALPN: client only" \
"$P_SRV debug_level=3" \
"$P_CLI debug_level=3 alpn=abc,1234" \
0 \
-c "client hello, adding alpn extension" \
-s "found alpn extension" \
-C "got an alert message, type: \\[2:120]" \
-S "server hello, adding alpn extension" \
-C "found alpn extension " \
-c "Application Layer Protocol is (none)" \
-S "Application Layer Protocol is"
run_test "ALPN: server only" \
"$P_SRV debug_level=3 alpn=abc,1234" \
"$P_CLI debug_level=3" \
0 \
-C "client hello, adding alpn extension" \
-S "found alpn extension" \
-C "got an alert message, type: \\[2:120]" \
-S "server hello, adding alpn extension" \
-C "found alpn extension " \
-C "Application Layer Protocol is" \
-s "Application Layer Protocol is (none)"
run_test "ALPN: both, common cli1-srv1" \
"$P_SRV debug_level=3 alpn=abc,1234" \
"$P_CLI debug_level=3 alpn=abc,1234" \
0 \
-c "client hello, adding alpn extension" \
-s "found alpn extension" \
-C "got an alert message, type: \\[2:120]" \
-s "server hello, adding alpn extension" \
-c "found alpn extension" \
-c "Application Layer Protocol is abc" \
-s "Application Layer Protocol is abc"
run_test "ALPN: both, common cli2-srv1" \
"$P_SRV debug_level=3 alpn=abc,1234" \
"$P_CLI debug_level=3 alpn=1234,abc" \
0 \
-c "client hello, adding alpn extension" \
-s "found alpn extension" \
-C "got an alert message, type: \\[2:120]" \
-s "server hello, adding alpn extension" \
-c "found alpn extension" \
-c "Application Layer Protocol is abc" \
-s "Application Layer Protocol is abc"
run_test "ALPN: both, common cli1-srv2" \
"$P_SRV debug_level=3 alpn=abc,1234" \
"$P_CLI debug_level=3 alpn=1234,abcde" \
0 \
-c "client hello, adding alpn extension" \
-s "found alpn extension" \
-C "got an alert message, type: \\[2:120]" \
-s "server hello, adding alpn extension" \
-c "found alpn extension" \
-c "Application Layer Protocol is 1234" \
-s "Application Layer Protocol is 1234"
run_test "ALPN: both, no common" \
"$P_SRV debug_level=3 alpn=abc,123" \
"$P_CLI debug_level=3 alpn=1234,abcde" \
1 \
-c "client hello, adding alpn extension" \
-s "found alpn extension" \
-c "got an alert message, type: \\[2:120]" \
-S "server hello, adding alpn extension" \
-C "found alpn extension" \
-C "Application Layer Protocol is 1234" \
-S "Application Layer Protocol is 1234"
fi
# Tests for keyUsage in leaf certificates, part 1:
# server-side certificate/suite selection
run_test "keyUsage srv: RSA, digitalSignature -> (EC)DHE-RSA" \
"$P_SRV key_file=data_files/server2.key \
crt_file=data_files/server2.ku-ds.crt" \
"$P_CLI" \
0 \
-c "Ciphersuite is TLS-[EC]*DHE-RSA-WITH-"
run_test "keyUsage srv: RSA, keyEncipherment -> RSA" \
"$P_SRV key_file=data_files/server2.key \
crt_file=data_files/server2.ku-ke.crt" \
"$P_CLI" \
0 \
-c "Ciphersuite is TLS-RSA-WITH-"
run_test "keyUsage srv: RSA, keyAgreement -> fail" \
"$P_SRV key_file=data_files/server2.key \
crt_file=data_files/server2.ku-ka.crt" \
"$P_CLI" \
1 \
-C "Ciphersuite is "
run_test "keyUsage srv: ECDSA, digitalSignature -> ECDHE-ECDSA" \
"$P_SRV key_file=data_files/server5.key \
crt_file=data_files/server5.ku-ds.crt" \
"$P_CLI" \
0 \
-c "Ciphersuite is TLS-ECDHE-ECDSA-WITH-"
run_test "keyUsage srv: ECDSA, keyAgreement -> ECDH-" \
"$P_SRV key_file=data_files/server5.key \
crt_file=data_files/server5.ku-ka.crt" \
"$P_CLI" \
0 \
-c "Ciphersuite is TLS-ECDH-"
run_test "keyUsage srv: ECDSA, keyEncipherment -> fail" \
"$P_SRV key_file=data_files/server5.key \
crt_file=data_files/server5.ku-ke.crt" \
"$P_CLI" \
1 \
-C "Ciphersuite is "
# Tests for keyUsage in leaf certificates, part 2:
# client-side checking of server cert
run_test "keyUsage cli: DigitalSignature+KeyEncipherment, RSA: OK" \
"$O_SRV -key data_files/server2.key \
-cert data_files/server2.ku-ds_ke.crt" \
"$P_CLI debug_level=1 \
force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
0 \
-C "bad certificate (usage extensions)" \
-C "Processing of the Certificate handshake message failed" \
-c "Ciphersuite is TLS-"
run_test "keyUsage cli: DigitalSignature+KeyEncipherment, DHE-RSA: OK" \
"$O_SRV -key data_files/server2.key \
-cert data_files/server2.ku-ds_ke.crt" \
"$P_CLI debug_level=1 \
force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA" \
0 \
-C "bad certificate (usage extensions)" \
-C "Processing of the Certificate handshake message failed" \
-c "Ciphersuite is TLS-"
run_test "keyUsage cli: KeyEncipherment, RSA: OK" \
"$O_SRV -key data_files/server2.key \
-cert data_files/server2.ku-ke.crt" \
"$P_CLI debug_level=1 \
force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
0 \
-C "bad certificate (usage extensions)" \
-C "Processing of the Certificate handshake message failed" \
-c "Ciphersuite is TLS-"
run_test "keyUsage cli: KeyEncipherment, DHE-RSA: fail" \
"$O_SRV -key data_files/server2.key \
-cert data_files/server2.ku-ke.crt" \
"$P_CLI debug_level=1 \
force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA" \
1 \
-c "bad certificate (usage extensions)" \
-c "Processing of the Certificate handshake message failed" \
-C "Ciphersuite is TLS-"
run_test "keyUsage cli: DigitalSignature, DHE-RSA: OK" \
"$O_SRV -key data_files/server2.key \
-cert data_files/server2.ku-ds.crt" \
"$P_CLI debug_level=1 \
force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA" \
0 \
-C "bad certificate (usage extensions)" \
-C "Processing of the Certificate handshake message failed" \
-c "Ciphersuite is TLS-"
run_test "keyUsage cli: DigitalSignature, RSA: fail" \
"$O_SRV -key data_files/server2.key \
-cert data_files/server2.ku-ds.crt" \
"$P_CLI debug_level=1 \
force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
1 \
-c "bad certificate (usage extensions)" \
-c "Processing of the Certificate handshake message failed" \
-C "Ciphersuite is TLS-"
# Tests for keyUsage in leaf certificates, part 3:
# server-side checking of client cert
run_test "keyUsage cli-auth: RSA, DigitalSignature: OK" \
"$P_SRV debug_level=1 auth_mode=optional" \
"$O_CLI -key data_files/server2.key \
-cert data_files/server2.ku-ds.crt" \
0 \
-S "bad certificate (usage extensions)" \
-S "Processing of the Certificate handshake message failed"
run_test "keyUsage cli-auth: RSA, KeyEncipherment: fail (soft)" \
"$P_SRV debug_level=1 auth_mode=optional" \
"$O_CLI -key data_files/server2.key \
-cert data_files/server2.ku-ke.crt" \
0 \
-s "bad certificate (usage extensions)" \
-S "Processing of the Certificate handshake message failed"
run_test "keyUsage cli-auth: RSA, KeyEncipherment: fail (hard)" \
"$P_SRV debug_level=1 auth_mode=required" \
"$O_CLI -key data_files/server2.key \
-cert data_files/server2.ku-ke.crt" \
1 \
-s "bad certificate (usage extensions)" \
-s "Processing of the Certificate handshake message failed"
run_test "keyUsage cli-auth: ECDSA, DigitalSignature: OK" \
"$P_SRV debug_level=1 auth_mode=optional" \
"$O_CLI -key data_files/server5.key \
-cert data_files/server5.ku-ds.crt" \
0 \
-S "bad certificate (usage extensions)" \
-S "Processing of the Certificate handshake message failed"
run_test "keyUsage cli-auth: ECDSA, KeyAgreement: fail (soft)" \
"$P_SRV debug_level=1 auth_mode=optional" \
"$O_CLI -key data_files/server5.key \
-cert data_files/server5.ku-ka.crt" \
0 \
-s "bad certificate (usage extensions)" \
-S "Processing of the Certificate handshake message failed"
# Tests for extendedKeyUsage, part 1: server-side certificate/suite selection
run_test "extKeyUsage srv: serverAuth -> OK" \
"$P_SRV key_file=data_files/server5.key \
crt_file=data_files/server5.eku-srv.crt" \
"$P_CLI" \
0
run_test "extKeyUsage srv: serverAuth,clientAuth -> OK" \
"$P_SRV key_file=data_files/server5.key \
crt_file=data_files/server5.eku-srv.crt" \
"$P_CLI" \
0
run_test "extKeyUsage srv: codeSign,anyEKU -> OK" \
"$P_SRV key_file=data_files/server5.key \
crt_file=data_files/server5.eku-cs_any.crt" \
"$P_CLI" \
0
# add psk to leave an option for client to send SERVERQUIT
run_test "extKeyUsage srv: codeSign -> fail" \
"$P_SRV psk=abc123 key_file=data_files/server5.key \
crt_file=data_files/server5.eku-cli.crt" \
"$P_CLI psk=badbad" \
1
# Tests for extendedKeyUsage, part 2: client-side checking of server cert
run_test "extKeyUsage cli: serverAuth -> OK" \
"$O_SRV -key data_files/server5.key \
-cert data_files/server5.eku-srv.crt" \
"$P_CLI debug_level=1" \
0 \
-C "bad certificate (usage extensions)" \
-C "Processing of the Certificate handshake message failed" \
-c "Ciphersuite is TLS-"
run_test "extKeyUsage cli: serverAuth,clientAuth -> OK" \
"$O_SRV -key data_files/server5.key \
-cert data_files/server5.eku-srv_cli.crt" \
"$P_CLI debug_level=1" \
0 \
-C "bad certificate (usage extensions)" \
-C "Processing of the Certificate handshake message failed" \
-c "Ciphersuite is TLS-"
run_test "extKeyUsage cli: codeSign,anyEKU -> OK" \
"$O_SRV -key data_files/server5.key \
-cert data_files/server5.eku-cs_any.crt" \
"$P_CLI debug_level=1" \
0 \
-C "bad certificate (usage extensions)" \
-C "Processing of the Certificate handshake message failed" \
-c "Ciphersuite is TLS-"
run_test "extKeyUsage cli: codeSign -> fail" \
"$O_SRV -key data_files/server5.key \
-cert data_files/server5.eku-cs.crt" \
"$P_CLI debug_level=1" \
1 \
-c "bad certificate (usage extensions)" \
-c "Processing of the Certificate handshake message failed" \
-C "Ciphersuite is TLS-"
# Tests for extendedKeyUsage, part 3: server-side checking of client cert
run_test "extKeyUsage cli-auth: clientAuth -> OK" \
"$P_SRV debug_level=1 auth_mode=optional" \
"$O_CLI -key data_files/server5.key \
-cert data_files/server5.eku-cli.crt" \
0 \
-S "bad certificate (usage extensions)" \
-S "Processing of the Certificate handshake message failed"
run_test "extKeyUsage cli-auth: serverAuth,clientAuth -> OK" \
"$P_SRV debug_level=1 auth_mode=optional" \
"$O_CLI -key data_files/server5.key \
-cert data_files/server5.eku-srv_cli.crt" \
0 \
-S "bad certificate (usage extensions)" \
-S "Processing of the Certificate handshake message failed"
run_test "extKeyUsage cli-auth: codeSign,anyEKU -> OK" \
"$P_SRV debug_level=1 auth_mode=optional" \
"$O_CLI -key data_files/server5.key \
-cert data_files/server5.eku-cs_any.crt" \
0 \
-S "bad certificate (usage extensions)" \
-S "Processing of the Certificate handshake message failed"
run_test "extKeyUsage cli-auth: codeSign -> fail (soft)" \
"$P_SRV debug_level=1 auth_mode=optional" \
"$O_CLI -key data_files/server5.key \
-cert data_files/server5.eku-cs.crt" \
0 \
-s "bad certificate (usage extensions)" \
-S "Processing of the Certificate handshake message failed"
run_test "extKeyUsage cli-auth: codeSign -> fail (hard)" \
"$P_SRV debug_level=1 auth_mode=required" \
"$O_CLI -key data_files/server5.key \
-cert data_files/server5.eku-cs.crt" \
1 \
-s "bad certificate (usage extensions)" \
-s "Processing of the Certificate handshake message failed"
# Tests for DHM parameters loading
run_test "DHM parameters: reference" \
"$P_SRV" \
"$P_CLI force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA \
debug_level=3" \
0 \
-c "value of 'DHM: P ' (2048 bits)" \
-c "value of 'DHM: G ' (2048 bits)"
run_test "DHM parameters: other parameters" \
"$P_SRV dhm_file=data_files/dhparams.pem" \
"$P_CLI force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA \
debug_level=3" \
0 \
-c "value of 'DHM: P ' (1024 bits)" \
-c "value of 'DHM: G ' (2 bits)"
# Tests for PSK callback
run_test "PSK callback: psk, no callback" \
"$P_SRV psk=abc123 psk_identity=foo" \
"$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
psk_identity=foo psk=abc123" \
0 \
-S "SSL - None of the common ciphersuites is usable" \
-S "SSL - Unknown identity received" \
-S "SSL - Verification of the message MAC failed"
run_test "PSK callback: no psk, no callback" \
"$P_SRV" \
"$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
psk_identity=foo psk=abc123" \
1 \
-s "SSL - None of the common ciphersuites is usable" \
-S "SSL - Unknown identity received" \
-S "SSL - Verification of the message MAC failed"
run_test "PSK callback: callback overrides other settings" \
"$P_SRV psk=abc123 psk_identity=foo psk_list=abc,dead,def,beef" \
"$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
psk_identity=foo psk=abc123" \
1 \
-S "SSL - None of the common ciphersuites is usable" \
-s "SSL - Unknown identity received" \
-S "SSL - Verification of the message MAC failed"
run_test "PSK callback: first id matches" \
"$P_SRV psk_list=abc,dead,def,beef" \
"$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
psk_identity=abc psk=dead" \
0 \
-S "SSL - None of the common ciphersuites is usable" \
-S "SSL - Unknown identity received" \
-S "SSL - Verification of the message MAC failed"
run_test "PSK callback: second id matches" \
"$P_SRV psk_list=abc,dead,def,beef" \
"$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
psk_identity=def psk=beef" \
0 \
-S "SSL - None of the common ciphersuites is usable" \
-S "SSL - Unknown identity received" \
-S "SSL - Verification of the message MAC failed"
run_test "PSK callback: no match" \
"$P_SRV psk_list=abc,dead,def,beef" \
"$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
psk_identity=ghi psk=beef" \
1 \
-S "SSL - None of the common ciphersuites is usable" \
-s "SSL - Unknown identity received" \
-S "SSL - Verification of the message MAC failed"
run_test "PSK callback: wrong key" \
"$P_SRV psk_list=abc,dead,def,beef" \
"$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
psk_identity=abc psk=beef" \
1 \
-S "SSL - None of the common ciphersuites is usable" \
-S "SSL - Unknown identity received" \
-s "SSL - Verification of the message MAC failed"
# Tests for ciphersuites per version
run_test "Per-version suites: SSL3" \
"$P_SRV min_version=ssl3 version_suites=TLS-RSA-WITH-3DES-EDE-CBC-SHA,TLS-RSA-WITH-RC4-128-SHA,TLS-RSA-WITH-AES-128-CBC-SHA,TLS-RSA-WITH-AES-128-GCM-SHA256" \
"$P_CLI force_version=ssl3" \
0 \
-c "Ciphersuite is TLS-RSA-WITH-3DES-EDE-CBC-SHA"
run_test "Per-version suites: TLS 1.0" \
"$P_SRV arc4=1 version_suites=TLS-RSA-WITH-3DES-EDE-CBC-SHA,TLS-RSA-WITH-RC4-128-SHA,TLS-RSA-WITH-AES-128-CBC-SHA,TLS-RSA-WITH-AES-128-GCM-SHA256" \
"$P_CLI force_version=tls1 arc4=1" \
0 \
-c "Ciphersuite is TLS-RSA-WITH-RC4-128-SHA"
run_test "Per-version suites: TLS 1.1" \
"$P_SRV version_suites=TLS-RSA-WITH-3DES-EDE-CBC-SHA,TLS-RSA-WITH-RC4-128-SHA,TLS-RSA-WITH-AES-128-CBC-SHA,TLS-RSA-WITH-AES-128-GCM-SHA256" \
"$P_CLI force_version=tls1_1" \
0 \
-c "Ciphersuite is TLS-RSA-WITH-AES-128-CBC-SHA"
run_test "Per-version suites: TLS 1.2" \
"$P_SRV version_suites=TLS-RSA-WITH-3DES-EDE-CBC-SHA,TLS-RSA-WITH-RC4-128-SHA,TLS-RSA-WITH-AES-128-CBC-SHA,TLS-RSA-WITH-AES-128-GCM-SHA256" \
"$P_CLI force_version=tls1_2" \
0 \
-c "Ciphersuite is TLS-RSA-WITH-AES-128-GCM-SHA256"
# Tests for ssl_get_bytes_avail()
run_test "ssl_get_bytes_avail: no extra data" \
"$P_SRV" \
"$P_CLI request_size=100" \
0 \
-s "Read from client: 100 bytes read$"
run_test "ssl_get_bytes_avail: extra data" \
"$P_SRV" \
"$P_CLI request_size=500" \
0 \
-s "Read from client: 500 bytes read (.*+.*)"
# Tests for small packets
run_test "Small packet SSLv3 BlockCipher" \
"$P_SRV min_version=ssl3" \
"$P_CLI request_size=1 force_version=ssl3 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \
0 \
-s "Read from client: 1 bytes read"
run_test "Small packet SSLv3 StreamCipher" \
"$P_SRV min_version=ssl3 arc4=1" \
"$P_CLI request_size=1 force_version=ssl3 \
force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
0 \
-s "Read from client: 1 bytes read"
run_test "Small packet TLS 1.0 BlockCipher" \
"$P_SRV" \
"$P_CLI request_size=1 force_version=tls1 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \
0 \
-s "Read from client: 1 bytes read"
run_test "Small packet TLS 1.0 BlockCipher without EtM" \
"$P_SRV" \
"$P_CLI request_size=1 force_version=tls1 etm=0 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \
0 \
-s "Read from client: 1 bytes read"
run_test "Small packet TLS 1.0 BlockCipher truncated MAC" \
"$P_SRV" \
"$P_CLI request_size=1 force_version=tls1 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA \
trunc_hmac=1" \
0 \
-s "Read from client: 1 bytes read"
run_test "Small packet TLS 1.0 StreamCipher truncated MAC" \
"$P_SRV arc4=1" \
"$P_CLI request_size=1 force_version=tls1 \
force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \
trunc_hmac=1" \
0 \
-s "Read from client: 1 bytes read"
run_test "Small packet TLS 1.1 BlockCipher" \
"$P_SRV" \
"$P_CLI request_size=1 force_version=tls1_1 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \
0 \
-s "Read from client: 1 bytes read"
run_test "Small packet TLS 1.1 BlockCipher without EtM" \
"$P_SRV" \
"$P_CLI request_size=1 force_version=tls1_1 etm=0 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \
0 \
-s "Read from client: 1 bytes read"
run_test "Small packet TLS 1.1 StreamCipher" \
"$P_SRV arc4=1" \
"$P_CLI request_size=1 force_version=tls1_1 \
force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
0 \
-s "Read from client: 1 bytes read"
run_test "Small packet TLS 1.1 BlockCipher truncated MAC" \
"$P_SRV" \
"$P_CLI request_size=1 force_version=tls1_1 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA \
trunc_hmac=1" \
0 \
-s "Read from client: 1 bytes read"
run_test "Small packet TLS 1.1 StreamCipher truncated MAC" \
"$P_SRV arc4=1" \
"$P_CLI request_size=1 force_version=tls1_1 \
force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \
trunc_hmac=1" \
0 \
-s "Read from client: 1 bytes read"
run_test "Small packet TLS 1.2 BlockCipher" \
"$P_SRV" \
"$P_CLI request_size=1 force_version=tls1_2 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \
0 \
-s "Read from client: 1 bytes read"
run_test "Small packet TLS 1.2 BlockCipher without EtM" \
"$P_SRV" \
"$P_CLI request_size=1 force_version=tls1_2 etm=0 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \
0 \
-s "Read from client: 1 bytes read"
run_test "Small packet TLS 1.2 BlockCipher larger MAC" \
"$P_SRV" \
"$P_CLI request_size=1 force_version=tls1_2 \
force_ciphersuite=TLS-ECDHE-RSA-WITH-AES-256-CBC-SHA384" \
0 \
-s "Read from client: 1 bytes read"
run_test "Small packet TLS 1.2 BlockCipher truncated MAC" \
"$P_SRV" \
"$P_CLI request_size=1 force_version=tls1_2 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA \
trunc_hmac=1" \
0 \
-s "Read from client: 1 bytes read"
run_test "Small packet TLS 1.2 StreamCipher" \
"$P_SRV arc4=1" \
"$P_CLI request_size=1 force_version=tls1_2 \
force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
0 \
-s "Read from client: 1 bytes read"
run_test "Small packet TLS 1.2 StreamCipher truncated MAC" \
"$P_SRV arc4=1" \
"$P_CLI request_size=1 force_version=tls1_2 \
force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \
trunc_hmac=1" \
0 \
-s "Read from client: 1 bytes read"
run_test "Small packet TLS 1.2 AEAD" \
"$P_SRV" \
"$P_CLI request_size=1 force_version=tls1_2 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CCM" \
0 \
-s "Read from client: 1 bytes read"
run_test "Small packet TLS 1.2 AEAD shorter tag" \
"$P_SRV" \
"$P_CLI request_size=1 force_version=tls1_2 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CCM-8" \
0 \
-s "Read from client: 1 bytes read"
# Test for large packets
run_test "Large packet SSLv3 BlockCipher" \
"$P_SRV min_version=ssl3" \
"$P_CLI request_size=16384 force_version=ssl3 recsplit=0 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \
0 \
-s "Read from client: 16384 bytes read"
run_test "Large packet SSLv3 StreamCipher" \
"$P_SRV min_version=ssl3 arc4=1" \
"$P_CLI request_size=16384 force_version=ssl3 \
force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
0 \
-s "Read from client: 16384 bytes read"
run_test "Large packet TLS 1.0 BlockCipher" \
"$P_SRV" \
"$P_CLI request_size=16384 force_version=tls1 recsplit=0 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \
0 \
-s "Read from client: 16384 bytes read"
run_test "Large packet TLS 1.0 BlockCipher truncated MAC" \
"$P_SRV" \
"$P_CLI request_size=16384 force_version=tls1 recsplit=0 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA \
trunc_hmac=1" \
0 \
-s "Read from client: 16384 bytes read"
run_test "Large packet TLS 1.0 StreamCipher truncated MAC" \
"$P_SRV arc4=1" \
"$P_CLI request_size=16384 force_version=tls1 \
force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \
trunc_hmac=1" \
0 \
-s "Read from client: 16384 bytes read"
run_test "Large packet TLS 1.1 BlockCipher" \
"$P_SRV" \
"$P_CLI request_size=16384 force_version=tls1_1 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \
0 \
-s "Read from client: 16384 bytes read"
run_test "Large packet TLS 1.1 StreamCipher" \
"$P_SRV arc4=1" \
"$P_CLI request_size=16384 force_version=tls1_1 \
force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
0 \
-s "Read from client: 16384 bytes read"
run_test "Large packet TLS 1.1 BlockCipher truncated MAC" \
"$P_SRV" \
"$P_CLI request_size=16384 force_version=tls1_1 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA \
trunc_hmac=1" \
0 \
-s "Read from client: 16384 bytes read"
run_test "Large packet TLS 1.1 StreamCipher truncated MAC" \
"$P_SRV arc4=1" \
"$P_CLI request_size=16384 force_version=tls1_1 \
force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \
trunc_hmac=1" \
0 \
-s "Read from client: 16384 bytes read"
run_test "Large packet TLS 1.2 BlockCipher" \
"$P_SRV" \
"$P_CLI request_size=16384 force_version=tls1_2 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \
0 \
-s "Read from client: 16384 bytes read"
run_test "Large packet TLS 1.2 BlockCipher larger MAC" \
"$P_SRV" \
"$P_CLI request_size=16384 force_version=tls1_2 \
force_ciphersuite=TLS-ECDHE-RSA-WITH-AES-256-CBC-SHA384" \
0 \
-s "Read from client: 16384 bytes read"
run_test "Large packet TLS 1.2 BlockCipher truncated MAC" \
"$P_SRV" \
"$P_CLI request_size=16384 force_version=tls1_2 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA \
trunc_hmac=1" \
0 \
-s "Read from client: 16384 bytes read"
run_test "Large packet TLS 1.2 StreamCipher" \
"$P_SRV arc4=1" \
"$P_CLI request_size=16384 force_version=tls1_2 \
force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
0 \
-s "Read from client: 16384 bytes read"
run_test "Large packet TLS 1.2 StreamCipher truncated MAC" \
"$P_SRV arc4=1" \
"$P_CLI request_size=16384 force_version=tls1_2 \
force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \
trunc_hmac=1" \
0 \
-s "Read from client: 16384 bytes read"
run_test "Large packet TLS 1.2 AEAD" \
"$P_SRV" \
"$P_CLI request_size=16384 force_version=tls1_2 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CCM" \
0 \
-s "Read from client: 16384 bytes read"
run_test "Large packet TLS 1.2 AEAD shorter tag" \
"$P_SRV" \
"$P_CLI request_size=16384 force_version=tls1_2 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CCM-8" \
0 \
-s "Read from client: 16384 bytes read"
# Final report
echo "------------------------------------------------------------------------"
if [ $FAILS = 0 ]; then
printf "PASSED"
else
printf "FAILED"
fi
PASSES=$(( $TESTS - $FAILS ))
echo " ($PASSES / $TESTS tests ($SKIPS skipped))"
exit $FAILS