| /* BEGIN_HEADER */ |
| #include <stdint.h> |
| |
| /* Some tests in this module configure entropy sources. */ |
| #include "psa_crypto_invasive.h" |
| |
| #include "mbedtls/entropy.h" |
| #include "entropy_poll.h" |
| |
| #define ENTROPY_MIN_NV_SEED_SIZE \ |
| MAX(MBEDTLS_ENTROPY_MIN_PLATFORM, MBEDTLS_ENTROPY_BLOCK_SIZE) |
| |
| #include "psa_crypto_random_impl.h" |
| #if defined(MBEDTLS_PSA_HMAC_DRBG_MD_TYPE) |
| /* PSA crypto uses the HMAC_DRBG module. It reads from the entropy source twice: |
| * once for the initial entropy and once for a nonce. The nonce length is |
| * half the entropy length. For SHA-256, SHA-384 or SHA-512, the |
| * entropy length is 256 per the documentation of mbedtls_hmac_drbg_seed(), |
| * and PSA crypto doesn't support other hashes for HMAC_DRBG. */ |
| #define ENTROPY_NONCE_LEN ( 256 / 2 ) |
| #else |
| /* PSA crypto uses the CTR_DRBG module. In some configurations, it needs |
| * to read from the entropy source twice: once for the initial entropy |
| * and once for a nonce. */ |
| #include "mbedtls/ctr_drbg.h" |
| #define ENTROPY_NONCE_LEN MBEDTLS_CTR_DRBG_ENTROPY_NONCE_LEN |
| #endif |
| |
| #if !defined(MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG) |
| |
| typedef struct |
| { |
| size_t threshold; /* Minimum bytes to make mbedtls_entropy_func happy */ |
| size_t max_steps; |
| size_t *length_sequence; |
| size_t step; |
| } fake_entropy_state_t; |
| static int fake_entropy_source( void *state_arg, |
| unsigned char *output, size_t len, |
| size_t *olen ) |
| { |
| fake_entropy_state_t *state = state_arg; |
| size_t i; |
| |
| if( state->step >= state->max_steps ) |
| return( MBEDTLS_ERR_ENTROPY_SOURCE_FAILED ); |
| |
| *olen = MIN( len, state->length_sequence[state->step] ); |
| for( i = 0; i < *olen; i++ ) |
| output[i] = i; |
| ++state->step; |
| return( 0 ); |
| } |
| |
| #define ENTROPY_SOURCE_PLATFORM 0x00000001 |
| #define ENTROPY_SOURCE_TIMING 0x00000002 |
| #define ENTROPY_SOURCE_HARDWARE 0x00000004 |
| #define ENTROPY_SOURCE_NV_SEED 0x00000008 |
| #define ENTROPY_SOURCE_FAKE 0x40000000 |
| |
| static uint32_t custom_entropy_sources_mask; |
| static fake_entropy_state_t fake_entropy_state; |
| |
| /* This is a modified version of mbedtls_entropy_init() from entropy.c |
| * which chooses entropy sources dynamically. */ |
| static void custom_entropy_init( mbedtls_entropy_context *ctx ) |
| { |
| ctx->source_count = 0; |
| memset( ctx->source, 0, sizeof( ctx->source ) ); |
| |
| #if defined(MBEDTLS_THREADING_C) |
| mbedtls_mutex_init( &ctx->mutex ); |
| #endif |
| |
| ctx->accumulator_started = 0; |
| #if defined(MBEDTLS_ENTROPY_SHA512_ACCUMULATOR) |
| mbedtls_sha512_init( &ctx->accumulator ); |
| #else |
| mbedtls_sha256_init( &ctx->accumulator ); |
| #endif |
| |
| #if !defined(MBEDTLS_NO_PLATFORM_ENTROPY) |
| if( custom_entropy_sources_mask & ENTROPY_SOURCE_PLATFORM ) |
| mbedtls_entropy_add_source( ctx, mbedtls_platform_entropy_poll, NULL, |
| MBEDTLS_ENTROPY_MIN_PLATFORM, |
| MBEDTLS_ENTROPY_SOURCE_STRONG ); |
| #endif |
| #if defined(MBEDTLS_ENTROPY_HARDWARE_ALT) |
| if( custom_entropy_sources_mask & ENTROPY_SOURCE_HARDWARE ) |
| mbedtls_entropy_add_source( ctx, mbedtls_hardware_poll, NULL, |
| MBEDTLS_ENTROPY_MIN_HARDWARE, |
| MBEDTLS_ENTROPY_SOURCE_STRONG ); |
| #endif |
| #if defined(MBEDTLS_ENTROPY_NV_SEED) |
| if( custom_entropy_sources_mask & ENTROPY_SOURCE_NV_SEED ) |
| { |
| mbedtls_entropy_add_source( ctx, mbedtls_nv_seed_poll, NULL, |
| MBEDTLS_ENTROPY_BLOCK_SIZE, |
| MBEDTLS_ENTROPY_SOURCE_STRONG ); |
| ctx->initial_entropy_run = 0; |
| } |
| else |
| { |
| /* Skip the NV seed even though it's compiled in. */ |
| ctx->initial_entropy_run = 1; |
| } |
| #endif |
| |
| if( custom_entropy_sources_mask & ENTROPY_SOURCE_FAKE ) |
| mbedtls_entropy_add_source( ctx, |
| fake_entropy_source, &fake_entropy_state, |
| fake_entropy_state.threshold, |
| MBEDTLS_ENTROPY_SOURCE_STRONG ); |
| } |
| |
| #endif /* !defined(MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG) */ |
| |
| /* END_HEADER */ |
| |
| /* BEGIN_DEPENDENCIES |
| * depends_on:MBEDTLS_PSA_CRYPTO_C |
| * END_DEPENDENCIES |
| */ |
| |
| /* BEGIN_CASE depends_on:MBEDTLS_ENTROPY_NV_SEED:!MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG */ |
| void create_nv_seed( ) |
| { |
| static unsigned char seed[ENTROPY_MIN_NV_SEED_SIZE]; |
| TEST_ASSERT( mbedtls_nv_seed_write( seed, sizeof( seed ) ) >= 0 ); |
| } |
| /* END_CASE */ |
| |
| /* BEGIN_CASE */ |
| void init_deinit( int count ) |
| { |
| psa_status_t status; |
| int i; |
| for( i = 0; i < count; i++ ) |
| { |
| status = psa_crypto_init( ); |
| PSA_ASSERT( status ); |
| status = psa_crypto_init( ); |
| PSA_ASSERT( status ); |
| PSA_DONE( ); |
| } |
| } |
| /* END_CASE */ |
| |
| /* BEGIN_CASE */ |
| void deinit_without_init( int count ) |
| { |
| int i; |
| for( i = 0; i < count; i++ ) |
| { |
| PSA_ASSERT( psa_crypto_init( ) ); |
| PSA_DONE( ); |
| } |
| PSA_DONE( ); |
| } |
| /* END_CASE */ |
| |
| /* BEGIN_CASE */ |
| void validate_module_init_generate_random( int count ) |
| { |
| psa_status_t status; |
| uint8_t random[10] = { 0 }; |
| int i; |
| for( i = 0; i < count; i++ ) |
| { |
| status = psa_crypto_init( ); |
| PSA_ASSERT( status ); |
| PSA_DONE( ); |
| } |
| status = psa_generate_random( random, sizeof( random ) ); |
| TEST_EQUAL( status, PSA_ERROR_BAD_STATE ); |
| } |
| /* END_CASE */ |
| |
| /* BEGIN_CASE */ |
| void validate_module_init_key_based( int count ) |
| { |
| psa_status_t status; |
| uint8_t data[10] = { 0 }; |
| psa_key_attributes_t attributes = PSA_KEY_ATTRIBUTES_INIT; |
| mbedtls_svc_key_id_t key = mbedtls_svc_key_id_make( 0xdead, 0xdead ); |
| int i; |
| |
| for( i = 0; i < count; i++ ) |
| { |
| status = psa_crypto_init( ); |
| PSA_ASSERT( status ); |
| PSA_DONE( ); |
| } |
| psa_set_key_type( &attributes, PSA_KEY_TYPE_RAW_DATA ); |
| status = psa_import_key( &attributes, data, sizeof( data ), &key ); |
| TEST_EQUAL( status, PSA_ERROR_BAD_STATE ); |
| TEST_ASSERT( mbedtls_svc_key_id_is_null( key ) ); |
| } |
| /* END_CASE */ |
| |
| /* BEGIN_CASE depends_on:!MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG */ |
| void custom_entropy_sources( int sources_arg, int expected_init_status_arg ) |
| { |
| psa_status_t expected_init_status = expected_init_status_arg; |
| uint8_t random[10] = { 0 }; |
| |
| custom_entropy_sources_mask = sources_arg; |
| PSA_ASSERT( mbedtls_psa_crypto_configure_entropy_sources( |
| custom_entropy_init, mbedtls_entropy_free ) ); |
| |
| TEST_EQUAL( psa_crypto_init( ), expected_init_status ); |
| if( expected_init_status != PSA_SUCCESS ) |
| goto exit; |
| |
| PSA_ASSERT( psa_generate_random( random, sizeof( random ) ) ); |
| |
| exit: |
| PSA_DONE( ); |
| } |
| /* END_CASE */ |
| |
| /* BEGIN_CASE depends_on:!MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG */ |
| void fake_entropy_source( int threshold, |
| int amount1, |
| int amount2, |
| int amount3, |
| int amount4, |
| int expected_init_status_arg ) |
| { |
| psa_status_t expected_init_status = expected_init_status_arg; |
| uint8_t random[10] = { 0 }; |
| size_t lengths[4]; |
| |
| fake_entropy_state.threshold = threshold; |
| fake_entropy_state.step = 0; |
| fake_entropy_state.max_steps = 0; |
| if( amount1 >= 0 ) |
| lengths[fake_entropy_state.max_steps++] = amount1; |
| if( amount2 >= 0 ) |
| lengths[fake_entropy_state.max_steps++] = amount2; |
| if( amount3 >= 0 ) |
| lengths[fake_entropy_state.max_steps++] = amount3; |
| if( amount4 >= 0 ) |
| lengths[fake_entropy_state.max_steps++] = amount4; |
| fake_entropy_state.length_sequence = lengths; |
| |
| custom_entropy_sources_mask = ENTROPY_SOURCE_FAKE; |
| PSA_ASSERT( mbedtls_psa_crypto_configure_entropy_sources( |
| custom_entropy_init, mbedtls_entropy_free ) ); |
| |
| TEST_EQUAL( psa_crypto_init( ), expected_init_status ); |
| if( expected_init_status != PSA_SUCCESS ) |
| goto exit; |
| |
| PSA_ASSERT( psa_generate_random( random, sizeof( random ) ) ); |
| |
| exit: |
| PSA_DONE( ); |
| } |
| /* END_CASE */ |
| |
| /* BEGIN_CASE depends_on:MBEDTLS_ENTROPY_NV_SEED:!MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG */ |
| void entropy_from_nv_seed( int seed_size_arg, |
| int expected_init_status_arg ) |
| { |
| psa_status_t expected_init_status = expected_init_status_arg; |
| uint8_t random[10] = { 0 }; |
| uint8_t *seed = NULL; |
| size_t seed_size = seed_size_arg; |
| |
| ASSERT_ALLOC( seed, seed_size ); |
| TEST_ASSERT( mbedtls_nv_seed_write( seed, seed_size ) >= 0 ); |
| |
| custom_entropy_sources_mask = ENTROPY_SOURCE_NV_SEED; |
| PSA_ASSERT( mbedtls_psa_crypto_configure_entropy_sources( |
| custom_entropy_init, mbedtls_entropy_free ) ); |
| |
| TEST_EQUAL( psa_crypto_init( ), expected_init_status ); |
| if( expected_init_status != PSA_SUCCESS ) |
| goto exit; |
| |
| PSA_ASSERT( psa_generate_random( random, sizeof( random ) ) ); |
| |
| exit: |
| mbedtls_free( seed ); |
| PSA_DONE( ); |
| } |
| /* END_CASE */ |