| /** |
| * \file ecp_invasive.h |
| * |
| * \brief ECP module: interfaces for invasive testing only. |
| * |
| * The interfaces in this file are intended for testing purposes only. |
| * They SHOULD NOT be made available in library integrations except when |
| * building the library for testing. |
| */ |
| /* |
| * Copyright The Mbed TLS Contributors |
| * SPDX-License-Identifier: Apache-2.0 |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); you may |
| * not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| #ifndef MBEDTLS_ECP_INVASIVE_H |
| #define MBEDTLS_ECP_INVASIVE_H |
| |
| #include "common.h" |
| #include "mbedtls/bignum.h" |
| #include "bignum_mod.h" |
| #include "mbedtls/ecp.h" |
| |
| #if defined(MBEDTLS_TEST_HOOKS) && defined(MBEDTLS_ECP_C) |
| |
| #if defined(MBEDTLS_ECP_DP_SECP384R1_ENABLED) |
| /* Preconditions: |
| * - bits is a multiple of 64 or is 224 |
| * - c is -1 or -2 |
| * - 0 <= N < 2^bits |
| * - N has room for bits plus one limb |
| * |
| * Behavior: |
| * Set N to c * 2^bits + old_value_of_N. |
| */ |
| void mbedtls_ecp_fix_negative(mbedtls_mpi *N, signed char c, size_t bits); |
| #endif |
| |
| #if defined(MBEDTLS_ECP_MONTGOMERY_ENABLED) |
| /** Generate a private key on a Montgomery curve (Curve25519 or Curve448). |
| * |
| * This function implements key generation for the set of secret keys |
| * specified in [Curve25519] p. 5 and in [Curve448]. The resulting value |
| * has the lower bits masked but is not necessarily canonical. |
| * |
| * \note - [Curve25519] http://cr.yp.to/ecdh/curve25519-20060209.pdf |
| * - [RFC7748] https://tools.ietf.org/html/rfc7748 |
| * |
| * \p high_bit The position of the high-order bit of the key to generate. |
| * This is the bit-size of the key minus 1: |
| * 254 for Curve25519 or 447 for Curve448. |
| * \param d The randomly generated key. This is a number of size |
| * exactly \p n_bits + 1 bits, with the least significant bits |
| * masked as specified in [Curve25519] and in [RFC7748] ยง5. |
| * \param f_rng The RNG function. |
| * \param p_rng The RNG context to be passed to \p f_rng. |
| * |
| * \return \c 0 on success. |
| * \return \c MBEDTLS_ERR_ECP_xxx or MBEDTLS_ERR_MPI_xxx on failure. |
| */ |
| int mbedtls_ecp_gen_privkey_mx(size_t n_bits, |
| mbedtls_mpi *d, |
| int (*f_rng)(void *, unsigned char *, size_t), |
| void *p_rng); |
| |
| #endif /* MBEDTLS_ECP_MONTGOMERY_ENABLED */ |
| |
| #if defined(MBEDTLS_ECP_DP_SECP192R1_ENABLED) |
| |
| /** Fast quasi-reduction modulo p192 (FIPS 186-3 D.2.1) |
| * |
| * This operation expects a 384 bit MPI and the result of the reduction |
| * is a 192 bit MPI. |
| * |
| * \param[in,out] Np The address of the MPI to be converted. |
| * Must have twice as many limbs as the modulus. |
| * Upon return this holds the reduced value. The bitlength |
| * of the reduced value is the same as that of the modulus |
| * (192 bits). |
| * \param[in] Nn The length of \p Np in limbs. |
| */ |
| MBEDTLS_STATIC_TESTABLE |
| int mbedtls_ecp_mod_p192_raw(mbedtls_mpi_uint *Np, size_t Nn); |
| |
| #endif /* MBEDTLS_ECP_DP_SECP192R1_ENABLED */ |
| |
| #if defined(MBEDTLS_ECP_DP_SECP224R1_ENABLED) |
| |
| /** Fast quasi-reduction modulo p224 (FIPS 186-3 D.2.2) |
| * |
| * \param[in,out] X The address of the MPI to be converted. |
| * Must have exact limb size that stores a 448-bit MPI |
| * (double the bitlength of the modulus). |
| * Upon return holds the reduced value which is |
| * in range `0 <= X < 2 * N` (where N is the modulus). |
| * The bitlength of the reduced value is the same as |
| * that of the modulus (224 bits). |
| * \param[in] X_limbs The length of \p X in limbs. |
| * |
| * \return \c 0 on success. |
| * \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if \p X_limbs is not the |
| * limb size that sores a 448-bit MPI. |
| */ |
| MBEDTLS_STATIC_TESTABLE |
| int mbedtls_ecp_mod_p224_raw(mbedtls_mpi_uint *X, size_t X_limbs); |
| |
| #endif /* MBEDTLS_ECP_DP_SECP224R1_ENABLED */ |
| |
| #if defined(MBEDTLS_ECP_DP_SECP256R1_ENABLED) |
| |
| /** Fast quasi-reduction modulo p256 (FIPS 186-3 D.2.3) |
| * |
| * \param[in,out] X The address of the MPI to be converted. |
| * Must have exact limb size that stores a 512-bit MPI |
| * (double the bitlength of the modulus). |
| * Upon return holds the reduced value which is |
| * in range `0 <= X < 2 * N` (where N is the modulus). |
| * The bitlength of the reduced value is the same as |
| * that of the modulus (256 bits). |
| * \param[in] X_limbs The length of \p X in limbs. |
| * |
| * \return \c 0 on success. |
| * \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if \p X_limbs is not the |
| * limb size that sores a 512-bit MPI. |
| */ |
| MBEDTLS_STATIC_TESTABLE |
| int mbedtls_ecp_mod_p256_raw(mbedtls_mpi_uint *X, size_t X_limbs); |
| |
| #endif |
| |
| #if defined(MBEDTLS_ECP_DP_SECP521R1_ENABLED) |
| |
| /** Fast quasi-reduction modulo p521 = 2^521 - 1 (FIPS 186-3 D.2.5) |
| * |
| * \param[in,out] X The address of the MPI to be converted. |
| * Must have twice as many limbs as the modulus |
| * (the modulus is 521 bits long). Upon return this |
| * holds the reduced value. The reduced value is |
| * in range `0 <= X < 2 * N` (where N is the modulus). |
| * and its the bitlength is one plus the bitlength |
| * of the modulus. |
| * \param[in] X_limbs The length of \p X in limbs. |
| * |
| * \return \c 0 on success. |
| * \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if \p X_limbs does not have |
| * twice as many limbs as the modulus. |
| */ |
| MBEDTLS_STATIC_TESTABLE |
| int mbedtls_ecp_mod_p521_raw(mbedtls_mpi_uint *X, size_t X_limbs); |
| |
| #endif /* MBEDTLS_ECP_DP_SECP521R1_ENABLED */ |
| |
| /** Initialise a modulus with hard-coded const curve data. |
| * |
| * \note The caller is responsible for the \p N modulus' memory. |
| * mbedtls_mpi_mod_modulus_free(&N) should be invoked at the |
| * end of its lifecycle. |
| * |
| * \param[in,out] N The address of the modulus structure to populate. |
| * Must be initialized. |
| * \param[in] id The mbedtls_ecp_group_id for which to initialise the modulus. |
| * \param[in] ctype The mbedtls_ecp_curve_type identifier for a coordinate modulus (P) |
| * or a scalar modulus (N). |
| * |
| * \return \c 0 if successful. |
| * \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if the given MPIs do not |
| * have the correct number of limbs. |
| * |
| */ |
| MBEDTLS_STATIC_TESTABLE |
| int mbedtls_ecp_modulus_setup(mbedtls_mpi_mod_modulus *N, |
| const mbedtls_ecp_group_id id, |
| const mbedtls_ecp_curve_type ctype); |
| |
| #endif /* MBEDTLS_TEST_HOOKS && MBEDTLS_ECP_C */ |
| |
| #endif /* MBEDTLS_ECP_INVASIVE_H */ |