| ## This file contains a record of how some of the test data was |
| ## generated. The final build products are committed to the repository |
| ## as well to make sure that the test data is identical. You do not |
| ## need to use this makefile unless you're extending mbed TLS's tests. |
| |
| ## Many data files were generated prior to the existence of this |
| ## makefile, so the method of their generation was not recorded. |
| |
| ## Note that in addition to depending on the version of the data |
| ## generation tool, many of the build outputs are randomized, so |
| ## running this makefile twice would not produce the same results. |
| |
| ## Tools |
| OPENSSL ?= openssl |
| FAKETIME ?= faketime |
| |
| TOP_DIR = ../.. |
| MBEDTLS_CERT_WRITE ?= $(TOP_DIR)/programs/x509/cert_write |
| MBEDTLS_CERT_REQ ?= $(TOP_DIR)/programs/x509/cert_req |
| |
| |
| ## Build the generated test data. Note that since the final outputs |
| ## are committed to the repository, this target should do nothing on a |
| ## fresh checkout. Furthermore, since the generation is randomized, |
| ## re-running the same targets may result in differing files. The goal |
| ## of this makefile is primarily to serve as a record of how the |
| ## targets were generated in the first place. |
| default: all_final |
| |
| all_intermediate := # temporary files |
| all_final := # files used by tests |
| |
| |
| |
| ################################################################ |
| #### Generate certificates from existing keys |
| ################################################################ |
| |
| test_ca_crt = test-ca.crt |
| test_ca_key_file_rsa = test-ca.key |
| test_ca_pwd_rsa = PolarSSLTest |
| test_ca_config_file = test-ca.opensslconf |
| |
| test-ca.req.sha256: $(test_ca_key_file_rsa) |
| $(MBEDTLS_CERT_REQ) output_file=$@ filename=$(test_ca_key_file_rsa) password=$(test_ca_pwd_rsa) subject_name="C=NL,O=PolarSSL,CN=PolarSSL Test CA" md=SHA256 |
| all_intermediate += test-ca.req.sha256 |
| |
| test-ca.crt: $(test_ca_key_file_rsa) test-ca.req.sha256 |
| $(MBEDTLS_CERT_WRITE) is_ca=1 serial=3 request_file=test-ca.req.sha256 selfsign=1 issuer_name="C=NL,O=PolarSSL,CN=PolarSSL Test CA" issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144400 not_after=20290210144400 md=SHA1 version=3 output_file=$@ |
| all_final += test-ca.crt |
| |
| test-ca.crt.der: test-ca.crt |
| $(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@ |
| all_final += test-ca.crt.der |
| |
| test-ca.key.der: $(test_ca_key_file_rsa) |
| $(OPENSSL) pkey -in $< -out $@ -inform PEM -outform DER -passin "pass:$(test_ca_pwd_rsa)" |
| all_final += test-ca.key.der |
| |
| test-ca-sha1.crt: $(test_ca_key_file_rsa) test-ca.req.sha256 |
| $(MBEDTLS_CERT_WRITE) is_ca=1 serial=3 request_file=test-ca.req.sha256 selfsign=1 issuer_name="C=NL,O=PolarSSL,CN=PolarSSL Test CA" issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144400 not_after=20290210144400 md=SHA1 version=3 output_file=$@ |
| all_final += test-ca-sha1.crt |
| |
| test-ca-sha1.crt.der: test-ca-sha1.crt |
| $(OPENSSL) x509 -in $< -out $@ -inform PEM -outform DER |
| all_final += test-ca-sha1.crt.der |
| |
| test-ca-sha256.crt: $(test_ca_key_file_rsa) test-ca.req.sha256 |
| $(MBEDTLS_CERT_WRITE) is_ca=1 serial=3 request_file=test-ca.req.sha256 selfsign=1 issuer_name="C=NL,O=PolarSSL,CN=PolarSSL Test CA" issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144400 not_after=20290210144400 md=SHA256 version=3 output_file=$@ |
| all_final += test-ca-sha256.crt |
| |
| test-ca-sha256.crt.der: test-ca-sha256.crt |
| $(OPENSSL) x509 -in $< -out $@ -inform PEM -outform DER |
| all_final += test-ca-sha256.crt.der |
| |
| test-ca_utf8.crt: $(test_ca_key_file_rsa) |
| $(OPENSSL) req -x509 -new -nodes -key $(test_ca_key_file_rsa) -passin "pass:$(test_ca_pwd_rsa)" -set_serial 3 -config $(test_ca_config_file) -sha1 -days 3653 -utf8 -subj "/C=NL/O=PolarSSL/CN=PolarSSL Test CA" -out $@ |
| all_final += test-ca_utf8.crt |
| |
| test-ca_printable.crt: $(test_ca_key_file_rsa) |
| $(OPENSSL) req -x509 -new -nodes -key $(test_ca_key_file_rsa) -passin "pass:$(test_ca_pwd_rsa)" -set_serial 3 -config $(test_ca_config_file) -sha1 -days 3653 -subj "/C=NL/O=PolarSSL/CN=PolarSSL Test CA" -out $@ |
| all_final += test-ca_printable.crt |
| |
| test-ca_uppercase.crt: $(test_ca_key_file_rsa) |
| $(OPENSSL) req -x509 -new -nodes -key $(test_ca_key_file_rsa) -passin "pass:$(test_ca_pwd_rsa)" -set_serial 3 -config $(test_ca_config_file) -sha1 -days 3653 -subj "/C=NL/O=PolarSSL/CN=PolarSSL Test CA" -out $@ |
| all_final += test-ca_uppercase.crt |
| |
| test_ca_key_file_rsa_alt = test-ca-alt.key |
| |
| cert_example_multi.csr: rsa_pkcs1_1024_clear.pem |
| $(OPENSSL) req -new -subj "/C=NL/O=PolarSSL/CN=www.example.com" -set_serial 17 -config $(test_ca_config_file) -extensions dns_alt_names -days 3650 -key rsa_pkcs1_1024_clear.pem -out $@ |
| |
| cert_example_multi.crt: cert_example_multi.csr |
| $(OPENSSL) x509 -req -CA $(test_ca_crt) -CAkey $(test_ca_key_file_rsa) -extfile $(test_ca_config_file) -extensions dns_alt_names -passin "pass:$(test_ca_pwd_rsa)" -set_serial 17 -days 3653 -sha256 -in $< > $@ |
| |
| $(test_ca_key_file_rsa_alt):test-ca.opensslconf |
| $(OPENSSL) genrsa -out $@ 2048 |
| test-ca-alt.csr: $(test_ca_key_file_rsa_alt) $(test_ca_config_file) |
| $(OPENSSL) req -new -config $(test_ca_config_file) -key $(test_ca_key_file_rsa_alt) -subj "/C=NL/O=PolarSSL/CN=PolarSSL Test CA" -out $@ |
| all_intermediate += test-ca-alt.csr |
| test-ca-alt.crt: $(test_ca_key_file_rsa_alt) $(test_ca_config_file) test-ca-alt.csr |
| $(OPENSSL) req -x509 -config $(test_ca_config_file) -key $(test_ca_key_file_rsa_alt) -set_serial 0 -days 3653 -sha256 -in test-ca-alt.csr -out $@ |
| all_final += test-ca-alt.crt |
| test-ca-alt-good.crt: test-ca-alt.crt test-ca-sha256.crt |
| cat test-ca-alt.crt test-ca-sha256.crt > $@ |
| all_final += test-ca-alt-good.crt |
| test-ca-good-alt.crt: test-ca-alt.crt test-ca-sha256.crt |
| cat test-ca-sha256.crt test-ca-alt.crt > $@ |
| all_final += test-ca-good-alt.crt |
| |
| test_ca_crt_file_ec = test-ca2.crt |
| test_ca_key_file_ec = test-ca2.key |
| |
| test-ca2.req.sha256: $(test_ca_key_file_ec) |
| $(MBEDTLS_CERT_REQ) output_file=$@ filename=$(test_ca_key_file_ec) subject_name="C=NL,O=PolarSSL,CN=Polarssl Test EC CA" md=SHA256 |
| all_intermediate += test-ca2.req.sha256 |
| |
| test-ca2.crt: $(test_ca_key_file_ec) test-ca2.req.sha256 |
| $(MBEDTLS_CERT_WRITE) is_ca=1 serial=13926223505202072808 request_file=test-ca2.req.sha256 selfsign=1 issuer_name="C=NL,O=PolarSSL,CN=Polarssl Test EC CA" issuer_key=$(test_ca_key_file_ec) not_before=20190210144400 not_after=20290210144400 md=SHA256 version=3 output_file=$@ |
| all_final += test-ca.crt |
| |
| test-ca-any_policy.crt: $(test_ca_key_file_rsa) test-ca.req.sha256 |
| $(OPENSSL) req -x509 -config $(test_ca_config_file) -extensions v3_any_policy_ca -key $(test_ca_key_file_rsa) -passin "pass:$(test_ca_pwd_rsa)" -set_serial 0 -days 3653 -sha256 -in test-ca.req.sha256 -out $@ |
| all_final += test-ca-any_policy.crt |
| |
| test-ca-any_policy_ec.crt: $(test_ca_key_file_ec) test-ca.req_ec.sha256 |
| $(OPENSSL) req -x509 -config $(test_ca_config_file) -extensions v3_any_policy_ca -key $(test_ca_key_file_ec) -set_serial 0 -days 3653 -sha256 -in test-ca.req_ec.sha256 -out $@ |
| all_final += test-ca-any_policy_ec.crt |
| |
| test-ca-any_policy_with_qualifier.crt: $(test_ca_key_file_rsa) test-ca.req.sha256 |
| $(OPENSSL) req -x509 -config $(test_ca_config_file) -extensions v3_any_policy_qualifier_ca -key $(test_ca_key_file_rsa) -passin "pass:$(test_ca_pwd_rsa)" -set_serial 0 -days 3653 -sha256 -in test-ca.req.sha256 -out $@ |
| all_final += test-ca-any_policy_with_qualifier.crt |
| |
| test-ca-any_policy_with_qualifier_ec.crt: $(test_ca_key_file_ec) test-ca.req_ec.sha256 |
| $(OPENSSL) req -x509 -config $(test_ca_config_file) -extensions v3_any_policy_qualifier_ca -key $(test_ca_key_file_ec) -set_serial 0 -days 3653 -sha256 -in test-ca.req_ec.sha256 -out $@ |
| all_final += test-ca-any_policy_with_qualifier_ec.crt |
| |
| test-ca-multi_policy.crt: $(test_ca_key_file_rsa) test-ca.req.sha256 |
| $(OPENSSL) req -x509 -config $(test_ca_config_file) -extensions v3_multi_policy_ca -key $(test_ca_key_file_rsa) -passin "pass:$(test_ca_pwd_rsa)" -set_serial 0 -days 3653 -sha256 -in test-ca.req.sha256 -out $@ |
| all_final += test-ca-multi_policy.crt |
| |
| test-ca-multi_policy_ec.crt: $(test_ca_key_file_ec) test-ca.req_ec.sha256 |
| $(OPENSSL) req -x509 -config $(test_ca_config_file) -extensions v3_multi_policy_ca -key $(test_ca_key_file_ec) -set_serial 0 -days 3653 -sha256 -in test-ca.req_ec.sha256 -out $@ |
| all_final += test-ca-multi_policy_ec.crt |
| |
| test-ca-unsupported_policy.crt: $(test_ca_key_file_rsa) test-ca.req.sha256 |
| $(OPENSSL) req -x509 -config $(test_ca_config_file) -extensions v3_unsupported_policy_ca -key $(test_ca_key_file_rsa) -passin "pass:$(test_ca_pwd_rsa)" -set_serial 0 -days 3653 -sha256 -in test-ca.req.sha256 -out $@ |
| all_final += test-ca-unsupported_policy.crt |
| |
| test-ca-unsupported_policy_ec.crt: $(test_ca_key_file_ec) test-ca.req_ec.sha256 |
| $(OPENSSL) req -x509 -config $(test_ca_config_file) -extensions v3_unsupported_policy_ca -key $(test_ca_key_file_ec) -set_serial 0 -days 3653 -sha256 -in test-ca.req_ec.sha256 -out $@ |
| all_final += test-ca-unsupported_policy_ec.crt |
| |
| test-ca.req_ec.sha256: $(test_ca_key_file_ec) |
| $(MBEDTLS_CERT_REQ) output_file=$@ filename=$(test_ca_key_file_ec) subject_name="C=NL, O=PolarSSL, CN=Polarssl Test EC CA" md=SHA256 |
| all_intermediate += test-ca.req_ec.sha256 |
| |
| test-ca2.crt.der: $(test_ca_crt_file_ec) |
| $(OPENSSL) x509 -in $(test_ca_crt_file_ec) -out $@ -inform PEM -outform DER |
| all_final += test-ca2.crt.der |
| |
| test-ca2.key.der: $(test_ca_key_file_ec) |
| $(OPENSSL) pkey -in $(test_ca_key_file_ec) -out $@ -inform PEM -outform DER |
| all_final += test-ca2.key.der |
| |
| test_ca_crt_cat12 = test-ca_cat12.crt |
| $(test_ca_crt_cat12): $(test_ca_crt) $(test_ca_crt_file_ec) |
| cat $(test_ca_crt) $(test_ca_crt_file_ec) > $@ |
| all_final += $(test_ca_crt_cat12) |
| |
| test_ca_crt_cat21 = test-ca_cat21.crt |
| $(test_ca_crt_cat21): $(test_ca_crt) $(test_ca_crt_file_ec) |
| cat $(test_ca_crt_file_ec) $(test_ca_crt) > $@ |
| all_final += $(test_ca_crt_cat21) |
| |
| test-int-ca.csr: test-int-ca.key $(test_ca_config_file) |
| $(OPENSSL) req -new -config $(test_ca_config_file) -key test-int-ca.key -subj "/C=NL/O=PolarSSL/CN=PolarSSL Test Intermediate CA" -out $@ |
| all_intermediate += test-int-ca.csr |
| test-int-ca-exp.crt: $(test_ca_crt_file_ec) $(test_ca_key_file_ec) $(test_ca_config_file) test-int-ca.csr |
| $(FAKETIME) -f -3653d $(OPENSSL) x509 -req -extfile $(test_ca_config_file) -extensions v3_ca -CA $(test_ca_crt_file_ec) -CAkey $(test_ca_key_file_ec) -set_serial 14 -days 3653 -sha256 -in test-int-ca.csr -out $@ |
| all_final += test-int-ca-exp.crt |
| |
| enco-cert-utf8str.pem: rsa_pkcs1_1024_clear.pem |
| $(MBEDTLS_CERT_WRITE) subject_key=rsa_pkcs1_1024_clear.pem subject_name="CN=dw.yonan.net" issuer_crt=enco-ca-prstr.pem issuer_key=rsa_pkcs1_1024_clear.pem not_before=20190210144406 not_after=20290210144406 md=SHA1 version=3 output_file=$@ |
| |
| crl-idp.pem: $(test_ca_crt) $(test_ca_key_file_rsa) $(test_ca_config_file) |
| $(OPENSSL) ca -gencrl -batch -cert $(test_ca_crt) -keyfile $(test_ca_key_file_rsa) -key $(test_ca_pwd_rsa) -config $(test_ca_config_file) -name test_ca -md sha256 -crldays 3653 -crlexts crl_ext_idp -out $@ |
| all_final += crl-idp.pem |
| crl-idpnc.pem: $(test_ca_crt) $(test_ca_key_file_rsa) $(test_ca_config_file) |
| $(OPENSSL) ca -gencrl -batch -cert $(test_ca_crt) -keyfile $(test_ca_key_file_rsa) -key $(test_ca_pwd_rsa) -config $(test_ca_config_file) -name test_ca -md sha256 -crldays 3653 -crlexts crl_ext_idp_nc -out $@ |
| all_final += crl-idpnc.pem |
| |
| cli_crt_key_file_rsa = cli-rsa.key |
| cli_crt_extensions_file = cli.opensslconf |
| |
| cli-rsa.csr: $(cli_crt_key_file_rsa) |
| $(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL,CN=PolarSSL Client 2" md=SHA1 |
| all_intermediate += cli-rsa.csr |
| |
| cli-rsa-sha1.crt: cli-rsa.csr |
| $(MBEDTLS_CERT_WRITE) request_file=$< serial=4 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA1 version=3 output_file=$@ |
| |
| cli-rsa-sha256.crt: cli-rsa.csr |
| $(MBEDTLS_CERT_WRITE) request_file=$< serial=4 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA256 version=3 output_file=$@ |
| all_final += cli-rsa-sha256.crt |
| |
| cli-rsa-sha256.crt.der: cli-rsa-sha256.crt |
| $(OPENSSL) x509 -in $< -out $@ -inform PEM -outform DER |
| all_final += cli-rsa-sha256.crt.der |
| |
| cli-rsa-sha256-badalg.crt.der: cli-rsa-sha256.crt.der |
| hexdump -ve '1/1 "%.2X"' $< | sed "s/06092A864886F70D01010B0500/06092A864886F70D01010B0900/2" | xxd -r -p > $@ |
| all_final += cli-rsa-sha256-badalg.crt.der |
| |
| cli-rsa.key.der: $(cli_crt_key_file_rsa) |
| $(OPENSSL) pkey -in $< -out $@ -inform PEM -outform DER |
| all_final += cli-rsa.key.der |
| |
| test_ca_int_rsa1 = test-int-ca.crt |
| |
| server7.csr: server7.key |
| $(OPENSSL) req -new -key server7.key -subj "/C=NL/O=PolarSSL/CN=localhost" -out $@ |
| all_intermediate += server7.csr |
| server7-expired.crt: server7.csr $(test_ca_int_rsa1) |
| $(FAKETIME) -f -3653d $(OPENSSL) x509 -req -extfile $(cli_crt_extensions_file) -extensions cli-rsa -CA $(test_ca_int_rsa1) -CAkey test-int-ca.key -set_serial 16 -days 3653 -sha256 -in server7.csr | cat - $(test_ca_int_rsa1) > $@ |
| all_final += server7-expired.crt |
| server7-future.crt: server7.csr $(test_ca_int_rsa1) |
| $(FAKETIME) -f +3653d $(OPENSSL) x509 -req -extfile $(cli_crt_extensions_file) -extensions cli-rsa -CA $(test_ca_int_rsa1) -CAkey test-int-ca.key -set_serial 16 -days 3653 -sha256 -in server7.csr | cat - $(test_ca_int_rsa1) > $@ |
| all_final += server7-future.crt |
| server7-badsign.crt: server7.crt $(test_ca_int_rsa1) |
| { head -n-2 $<; tail -n-2 $< | sed -e '1s/0\(=*\)$$/_\1/' -e '1s/[^_=]\(=*\)$$/0\1/' -e '1s/_/1/'; cat $(test_ca_int_rsa1); } > $@ |
| all_final += server7-badsign.crt |
| server7_int-ca-exp.crt: server7.crt test-int-ca-exp.crt |
| cat server7.crt test-int-ca-exp.crt > $@ |
| all_final += server7_int-ca-exp.crt |
| |
| cli2.req.sha256: cli2.key |
| $(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL,CN=PolarSSL Test Client 2" md=SHA256 |
| |
| all_final += server1.req.sha1 |
| cli2.crt: cli2.req.sha256 |
| $(MBEDTLS_CERT_WRITE) request_file=cli2.req.sha256 serial=13 selfsign=0 issuer_name="C=NL,O=PolarSSL,CN=PolarSSL Test EC CA" issuer_key=$(test_ca_key_file_ec) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144400 not_after=20290210144400 md=SHA256 version=3 output_file=$@ |
| all_final += cli2.crt |
| |
| cli2.crt.der: cli2.crt |
| $(OPENSSL) x509 -in $< -out $@ -inform PEM -outform DER |
| all_final += cli2.crt.der |
| |
| cli2.key.der: cli2.key |
| $(OPENSSL) pkey -in $< -out $@ -inform PEM -outform DER |
| all_final += cli2.key.der |
| |
| server5_pwd_ec = PolarSSLTest |
| |
| server5.crt.der: server5.crt |
| $(OPENSSL) x509 -in $< -out $@ -inform PEM -outform DER |
| all_final += server5.crt.der |
| |
| server5.key.der: server5.key |
| $(OPENSSL) pkey -in $< -out $@ -inform PEM -outform DER |
| all_final += server5.key.der |
| |
| server5.key.enc: server5.key |
| $(OPENSSL) ec -aes256 -in $< -out $@ -passout "pass:$(server5_pwd_ec)" |
| all_final += server5.key.enc |
| |
| server5-ss-expired.crt: server5.key |
| $(FAKETIME) -f -3653d $(OPENSSL) req -x509 -new -subj "/C=UK/O=mbed TLS/OU=testsuite/CN=localhost" -days 3653 -sha256 -key $< -out $@ |
| all_final += server5-ss-expired.crt |
| |
| # try to forge a copy of test-int-ca3 with different key |
| server5-ss-forgeca.crt: server5.key |
| $(FAKETIME) '2015-09-01 14:08:43' $(OPENSSL) req -x509 -new -subj "/C=UK/O=mbed TLS/CN=mbed TLS Test intermediate CA 3" -set_serial 77 -config $(test_ca_config_file) -extensions noext_ca -days 3650 -sha256 -key $< -out $@ |
| all_final += server5-ss-forgeca.crt |
| |
| server5-othername.crt: server5.key |
| $(OPENSSL) req -x509 -new -subj "/C=UK/O=Mbed TLS/CN=Mbed TLS othername SAN" -set_serial 77 -config $(test_ca_config_file) -extensions othername_san -days 3650 -sha256 -key $< -out $@ |
| |
| server5-unsupported_othername.crt: server5.key |
| $(OPENSSL) req -x509 -new -subj "/C=UK/O=Mbed TLS/CN=Mbed TLS unsupported othername SAN" -set_serial 77 -config $(test_ca_config_file) -extensions unsupoported_othername_san -days 3650 -sha256 -key $< -out $@ |
| |
| server5-fan.crt: server5.key |
| $(OPENSSL) req -x509 -new -subj "/C=UK/O=Mbed TLS/CN=Mbed TLS FAN" -set_serial 77 -config $(test_ca_config_file) -extensions fan_cert -days 3650 -sha256 -key server5.key -out $@ |
| |
| server5-tricky-ip-san.crt: server5.key |
| $(OPENSSL) req -x509 -new -subj "/C=UK/O=Mbed TLS/CN=Mbed TLS Tricky IP SAN" -set_serial 77 -config $(test_ca_config_file) -extensions tricky_ip_san -days 3650 -sha256 -key server5.key -out $@ |
| all_final += server5-tricky-ip-san.crt |
| |
| server10-badsign.crt: server10.crt |
| { head -n-2 $<; tail -n-2 $< | sed -e '1s/0\(=*\)$$/_\1/' -e '1s/[^_=]\(=*\)$$/0\1/' -e '1s/_/1/'; } > $@ |
| all_final += server10-badsign.crt |
| server10-bs_int3.pem: server10-badsign.crt test-int-ca3.crt |
| cat server10-badsign.crt test-int-ca3.crt > $@ |
| all_final += server10-bs_int3.pem |
| test-int-ca3-badsign.crt: test-int-ca3.crt |
| { head -n-2 $<; tail -n-2 $< | sed -e '1s/0\(=*\)$$/_\1/' -e '1s/[^_=]\(=*\)$$/0\1/' -e '1s/_/1/'; } > $@ |
| all_final += test-int-ca3-badsign.crt |
| server10_int3-bs.pem: server10.crt test-int-ca3-badsign.crt |
| cat server10.crt test-int-ca3-badsign.crt > $@ |
| all_final += server10_int3-bs.pem |
| |
| rsa_pkcs1_2048_public.pem: server8.key |
| $(OPENSSL) rsa -in $< -outform PEM -RSAPublicKey_out -out $@ |
| all_final += rsa_pkcs1_2048_public.pem |
| |
| rsa_pkcs1_2048_public.der: rsa_pkcs1_2048_public.pem |
| $(OPENSSL) rsa -RSAPublicKey_in -in $< -outform DER -RSAPublicKey_out -out $@ |
| all_final += rsa_pkcs1_2048_public.der |
| |
| rsa_pkcs8_2048_public.pem: server8.key |
| $(OPENSSL) rsa -in $< -outform PEM -pubout -out $@ |
| all_final += rsa_pkcs8_2048_public.pem |
| |
| rsa_pkcs8_2048_public.der: rsa_pkcs8_2048_public.pem |
| $(OPENSSL) rsa -pubin -in $< -outform DER -pubout -out $@ |
| all_final += rsa_pkcs8_2048_public.der |
| |
| ################################################################ |
| #### Generate various RSA keys |
| ################################################################ |
| |
| ### Password used for PKCS1-encoded encrypted RSA keys |
| keys_rsa_basic_pwd = testkey |
| |
| ### Password used for PKCS8-encoded encrypted RSA keys |
| keys_rsa_pkcs8_pwd = PolarSSLTest |
| |
| ### Basic 1024-, 2048- and 4096-bit unencrypted RSA keys from which |
| ### all other encrypted RSA keys are derived. |
| rsa_pkcs1_1024_clear.pem: |
| $(OPENSSL) genrsa -out $@ 1024 |
| all_final += rsa_pkcs1_1024_clear.pem |
| rsa_pkcs1_2048_clear.pem: |
| $(OPENSSL) genrsa -out $@ 2048 |
| all_final += rsa_pkcs1_2048_clear.pem |
| rsa_pkcs1_4096_clear.pem: |
| $(OPENSSL) genrsa -out $@ 4096 |
| all_final += rsa_pkcs1_4096_clear.pem |
| |
| ### |
| ### PKCS1-encoded, encrypted RSA keys |
| ### |
| |
| ### 1024-bit |
| rsa_pkcs1_1024_des.pem: rsa_pkcs1_1024_clear.pem |
| $(OPENSSL) rsa -des -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)" |
| all_final += rsa_pkcs1_1024_des.pem |
| rsa_pkcs1_1024_3des.pem: rsa_pkcs1_1024_clear.pem |
| $(OPENSSL) rsa -des3 -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)" |
| all_final += rsa_pkcs1_1024_3des.pem |
| rsa_pkcs1_1024_aes128.pem: rsa_pkcs1_1024_clear.pem |
| $(OPENSSL) rsa -aes128 -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)" |
| all_final += rsa_pkcs1_1024_aes128.pem |
| rsa_pkcs1_1024_aes192.pem: rsa_pkcs1_1024_clear.pem |
| $(OPENSSL) rsa -aes192 -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)" |
| all_final += rsa_pkcs1_1024_aes192.pem |
| rsa_pkcs1_1024_aes256.pem: rsa_pkcs1_1024_clear.pem |
| $(OPENSSL) rsa -aes256 -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)" |
| all_final += rsa_pkcs1_1024_aes256.pem |
| keys_rsa_enc_basic_1024: rsa_pkcs1_1024_des.pem rsa_pkcs1_1024_3des.pem rsa_pkcs1_1024_aes128.pem rsa_pkcs1_1024_aes192.pem rsa_pkcs1_1024_aes256.pem |
| |
| # 2048-bit |
| rsa_pkcs1_2048_des.pem: rsa_pkcs1_2048_clear.pem |
| $(OPENSSL) rsa -des -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)" |
| all_final += rsa_pkcs1_2048_des.pem |
| rsa_pkcs1_2048_3des.pem: rsa_pkcs1_2048_clear.pem |
| $(OPENSSL) rsa -des3 -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)" |
| all_final += rsa_pkcs1_2048_3des.pem |
| rsa_pkcs1_2048_aes128.pem: rsa_pkcs1_2048_clear.pem |
| $(OPENSSL) rsa -aes128 -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)" |
| all_final += rsa_pkcs1_2048_aes128.pem |
| rsa_pkcs1_2048_aes192.pem: rsa_pkcs1_2048_clear.pem |
| $(OPENSSL) rsa -aes192 -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)" |
| all_final += rsa_pkcs1_2048_aes192.pem |
| rsa_pkcs1_2048_aes256.pem: rsa_pkcs1_2048_clear.pem |
| $(OPENSSL) rsa -aes256 -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)" |
| all_final += rsa_pkcs1_2048_aes256.pem |
| keys_rsa_enc_basic_2048: rsa_pkcs1_2048_des.pem rsa_pkcs1_2048_3des.pem rsa_pkcs1_2048_aes128.pem rsa_pkcs1_2048_aes192.pem rsa_pkcs1_2048_aes256.pem |
| |
| # 4096-bit |
| rsa_pkcs1_4096_des.pem: rsa_pkcs1_4096_clear.pem |
| $(OPENSSL) rsa -des -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)" |
| all_final += rsa_pkcs1_4096_des.pem |
| rsa_pkcs1_4096_3des.pem: rsa_pkcs1_4096_clear.pem |
| $(OPENSSL) rsa -des3 -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)" |
| all_final += rsa_pkcs1_4096_3des.pem |
| rsa_pkcs1_4096_aes128.pem: rsa_pkcs1_4096_clear.pem |
| $(OPENSSL) rsa -aes128 -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)" |
| all_final += rsa_pkcs1_4096_aes128.pem |
| rsa_pkcs1_4096_aes192.pem: rsa_pkcs1_4096_clear.pem |
| $(OPENSSL) rsa -aes192 -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)" |
| all_final += rsa_pkcs1_4096_aes192.pem |
| rsa_pkcs1_4096_aes256.pem: rsa_pkcs1_4096_clear.pem |
| $(OPENSSL) rsa -aes256 -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)" |
| all_final += rsa_pkcs1_4096_aes256.pem |
| keys_rsa_enc_basic_4096: rsa_pkcs1_4096_des.pem rsa_pkcs1_4096_3des.pem rsa_pkcs1_4096_aes128.pem rsa_pkcs1_4096_aes192.pem rsa_pkcs1_4096_aes256.pem |
| |
| ### |
| ### PKCS8-v1 encoded, encrypted RSA keys |
| ### |
| |
| ### 1024-bit |
| rsa_pkcs8_pbe_sha1_1024_3des.der: rsa_pkcs1_1024_clear.pem |
| $(OPENSSL) pkcs8 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" -topk8 -v1 PBE-SHA1-3DES |
| all_final += rsa_pkcs8_pbe_sha1_1024_3des.der |
| rsa_pkcs8_pbe_sha1_1024_3des.pem: rsa_pkcs1_1024_clear.pem |
| $(OPENSSL) pkcs8 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" -topk8 -v1 PBE-SHA1-3DES |
| all_final += rsa_pkcs8_pbe_sha1_1024_3des.pem |
| keys_rsa_enc_pkcs8_v1_1024_3des: rsa_pkcs8_pbe_sha1_1024_3des.pem rsa_pkcs8_pbe_sha1_1024_3des.der |
| |
| rsa_pkcs8_pbe_sha1_1024_2des.der: rsa_pkcs1_1024_clear.pem |
| $(OPENSSL) pkcs8 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" -topk8 -v1 PBE-SHA1-2DES |
| all_final += rsa_pkcs8_pbe_sha1_1024_2des.der |
| rsa_pkcs8_pbe_sha1_1024_2des.pem: rsa_pkcs1_1024_clear.pem |
| $(OPENSSL) pkcs8 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" -topk8 -v1 PBE-SHA1-2DES |
| all_final += rsa_pkcs8_pbe_sha1_1024_2des.pem |
| keys_rsa_enc_pkcs8_v1_1024_2des: rsa_pkcs8_pbe_sha1_1024_2des.pem rsa_pkcs8_pbe_sha1_1024_2des.der |
| |
| keys_rsa_enc_pkcs8_v1_1024: keys_rsa_enc_pkcs8_v1_1024_3des keys_rsa_enc_pkcs8_v1_1024_2des |
| |
| ### 2048-bit |
| rsa_pkcs8_pbe_sha1_2048_3des.der: rsa_pkcs1_2048_clear.pem |
| $(OPENSSL) pkcs8 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" -topk8 -v1 PBE-SHA1-3DES |
| all_final += rsa_pkcs8_pbe_sha1_2048_3des.der |
| rsa_pkcs8_pbe_sha1_2048_3des.pem: rsa_pkcs1_2048_clear.pem |
| $(OPENSSL) pkcs8 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" -topk8 -v1 PBE-SHA1-3DES |
| all_final += rsa_pkcs8_pbe_sha1_2048_3des.pem |
| keys_rsa_enc_pkcs8_v1_2048_3des: rsa_pkcs8_pbe_sha1_2048_3des.pem rsa_pkcs8_pbe_sha1_2048_3des.der |
| |
| rsa_pkcs8_pbe_sha1_2048_2des.der: rsa_pkcs1_2048_clear.pem |
| $(OPENSSL) pkcs8 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" -topk8 -v1 PBE-SHA1-2DES |
| all_final += rsa_pkcs8_pbe_sha1_2048_2des.der |
| rsa_pkcs8_pbe_sha1_2048_2des.pem: rsa_pkcs1_2048_clear.pem |
| $(OPENSSL) pkcs8 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" -topk8 -v1 PBE-SHA1-2DES |
| all_final += rsa_pkcs8_pbe_sha1_2048_2des.pem |
| keys_rsa_enc_pkcs8_v1_2048_2des: rsa_pkcs8_pbe_sha1_2048_2des.pem rsa_pkcs8_pbe_sha1_2048_2des.der |
| |
| keys_rsa_enc_pkcs8_v1_2048: keys_rsa_enc_pkcs8_v1_2048_3des keys_rsa_enc_pkcs8_v1_2048_2des |
| |
| ### 4096-bit |
| rsa_pkcs8_pbe_sha1_4096_3des.der: rsa_pkcs1_4096_clear.pem |
| $(OPENSSL) pkcs8 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" -topk8 -v1 PBE-SHA1-3DES |
| all_final += rsa_pkcs8_pbe_sha1_4096_3des.der |
| rsa_pkcs8_pbe_sha1_4096_3des.pem: rsa_pkcs1_4096_clear.pem |
| $(OPENSSL) pkcs8 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" -topk8 -v1 PBE-SHA1-3DES |
| all_final += rsa_pkcs8_pbe_sha1_4096_3des.pem |
| keys_rsa_enc_pkcs8_v1_4096_3des: rsa_pkcs8_pbe_sha1_4096_3des.pem rsa_pkcs8_pbe_sha1_4096_3des.der |
| |
| rsa_pkcs8_pbe_sha1_4096_2des.der: rsa_pkcs1_4096_clear.pem |
| $(OPENSSL) pkcs8 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" -topk8 -v1 PBE-SHA1-2DES |
| all_final += rsa_pkcs8_pbe_sha1_4096_2des.der |
| rsa_pkcs8_pbe_sha1_4096_2des.pem: rsa_pkcs1_4096_clear.pem |
| $(OPENSSL) pkcs8 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" -topk8 -v1 PBE-SHA1-2DES |
| all_final += rsa_pkcs8_pbe_sha1_4096_2des.pem |
| keys_rsa_enc_pkcs8_v1_4096_2des: rsa_pkcs8_pbe_sha1_4096_2des.pem rsa_pkcs8_pbe_sha1_4096_2des.der |
| |
| keys_rsa_enc_pkcs8_v1_4096: keys_rsa_enc_pkcs8_v1_4096_3des keys_rsa_enc_pkcs8_v1_4096_2des |
| |
| ### |
| ### PKCS8-v2 encoded, encrypted RSA keys, no PRF specified (default for OpenSSL1.0: hmacWithSHA1) |
| ### |
| |
| ### 1024-bit |
| rsa_pkcs8_pbes2_pbkdf2_1024_3des.der: rsa_pkcs1_1024_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des3 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_1024_3des.der |
| rsa_pkcs8_pbes2_pbkdf2_1024_3des.pem: rsa_pkcs1_1024_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des3 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_1024_3des.pem |
| keys_rsa_enc_pkcs8_v2_1024_3des: rsa_pkcs8_pbes2_pbkdf2_1024_3des.der rsa_pkcs8_pbes2_pbkdf2_1024_3des.pem |
| |
| rsa_pkcs8_pbes2_pbkdf2_1024_des.der: rsa_pkcs1_1024_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_1024_des.der |
| rsa_pkcs8_pbes2_pbkdf2_1024_des.pem: rsa_pkcs1_1024_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_1024_des.pem |
| keys_rsa_enc_pkcs8_v2_1024_des: rsa_pkcs8_pbes2_pbkdf2_1024_des.der rsa_pkcs8_pbes2_pbkdf2_1024_des.pem |
| |
| keys_rsa_enc_pkcs8_v2_1024: keys_rsa_enc_pkcs8_v2_1024_3des keys_rsa_enc_pkcs8_v2_1024_des |
| |
| ### 2048-bit |
| rsa_pkcs8_pbes2_pbkdf2_2048_3des.der: rsa_pkcs1_2048_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des3 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_2048_3des.der |
| rsa_pkcs8_pbes2_pbkdf2_2048_3des.pem: rsa_pkcs1_2048_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des3 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_2048_3des.pem |
| keys_rsa_enc_pkcs8_v2_2048_3des: rsa_pkcs8_pbes2_pbkdf2_2048_3des.der rsa_pkcs8_pbes2_pbkdf2_2048_3des.pem |
| |
| rsa_pkcs8_pbes2_pbkdf2_2048_des.der: rsa_pkcs1_2048_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_2048_des.der |
| rsa_pkcs8_pbes2_pbkdf2_2048_des.pem: rsa_pkcs1_2048_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_2048_des.pem |
| keys_rsa_enc_pkcs8_v2_2048_des: rsa_pkcs8_pbes2_pbkdf2_2048_des.der rsa_pkcs8_pbes2_pbkdf2_2048_des.pem |
| |
| keys_rsa_enc_pkcs8_v2_2048: keys_rsa_enc_pkcs8_v2_2048_3des keys_rsa_enc_pkcs8_v2_2048_des |
| |
| ### 4096-bit |
| rsa_pkcs8_pbes2_pbkdf2_4096_3des.der: rsa_pkcs1_4096_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des3 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_4096_3des.der |
| rsa_pkcs8_pbes2_pbkdf2_4096_3des.pem: rsa_pkcs1_4096_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des3 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_4096_3des.pem |
| keys_rsa_enc_pkcs8_v2_4096_3des: rsa_pkcs8_pbes2_pbkdf2_4096_3des.der rsa_pkcs8_pbes2_pbkdf2_4096_3des.pem |
| |
| rsa_pkcs8_pbes2_pbkdf2_4096_des.der: rsa_pkcs1_4096_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_4096_des.der |
| rsa_pkcs8_pbes2_pbkdf2_4096_des.pem: rsa_pkcs1_4096_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_4096_des.pem |
| keys_rsa_enc_pkcs8_v2_4096_des: rsa_pkcs8_pbes2_pbkdf2_4096_des.der rsa_pkcs8_pbes2_pbkdf2_4096_des.pem |
| |
| keys_rsa_enc_pkcs8_v2_4096: keys_rsa_enc_pkcs8_v2_4096_3des keys_rsa_enc_pkcs8_v2_4096_des |
| |
| ### |
| ### PKCS8-v2 encoded, encrypted RSA keys, PRF hmacWithSHA224 |
| ### |
| |
| ### 1024-bit |
| rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha224.der: rsa_pkcs1_1024_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA224 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha224.der |
| rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha224.pem: rsa_pkcs1_1024_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA224 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha224.pem |
| keys_rsa_enc_pkcs8_v2_1024_3des_sha224: rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha224.der rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha224.pem |
| |
| rsa_pkcs8_pbes2_pbkdf2_1024_des_sha224.der: rsa_pkcs1_1024_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA224 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_1024_des_sha224.der |
| rsa_pkcs8_pbes2_pbkdf2_1024_des_sha224.pem: rsa_pkcs1_1024_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA224 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_1024_des_sha224.pem |
| keys_rsa_enc_pkcs8_v2_1024_des_sha224: rsa_pkcs8_pbes2_pbkdf2_1024_des_sha224.der rsa_pkcs8_pbes2_pbkdf2_1024_des_sha224.pem |
| |
| keys_rsa_enc_pkcs8_v2_1024_sha224: keys_rsa_enc_pkcs8_v2_1024_3des_sha224 keys_rsa_enc_pkcs8_v2_1024_des_sha224 |
| |
| ### 2048-bit |
| rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha224.der: rsa_pkcs1_2048_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA224 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha224.der |
| rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha224.pem: rsa_pkcs1_2048_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA224 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha224.pem |
| keys_rsa_enc_pkcs8_v2_2048_3des_sha224: rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha224.der rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha224.pem |
| |
| rsa_pkcs8_pbes2_pbkdf2_2048_des_sha224.der: rsa_pkcs1_2048_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA224 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_2048_des_sha224.der |
| rsa_pkcs8_pbes2_pbkdf2_2048_des_sha224.pem: rsa_pkcs1_2048_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA224 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_2048_des_sha224.pem |
| keys_rsa_enc_pkcs8_v2_2048_des_sha224: rsa_pkcs8_pbes2_pbkdf2_2048_des_sha224.der rsa_pkcs8_pbes2_pbkdf2_2048_des_sha224.pem |
| |
| keys_rsa_enc_pkcs8_v2_2048_sha224: keys_rsa_enc_pkcs8_v2_2048_3des_sha224 keys_rsa_enc_pkcs8_v2_2048_des_sha224 |
| |
| ### 4096-bit |
| rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha224.der: rsa_pkcs1_4096_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA224 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha224.der |
| rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha224.pem: rsa_pkcs1_4096_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA224 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha224.pem |
| keys_rsa_enc_pkcs8_v2_4096_3des_sha224: rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha224.der rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha224.pem |
| |
| rsa_pkcs8_pbes2_pbkdf2_4096_des_sha224.der: rsa_pkcs1_4096_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA224 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_4096_des_sha224.der |
| rsa_pkcs8_pbes2_pbkdf2_4096_des_sha224.pem: rsa_pkcs1_4096_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA224 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_4096_des_sha224.pem |
| keys_rsa_enc_pkcs8_v2_4096_des_sha224: rsa_pkcs8_pbes2_pbkdf2_4096_des_sha224.der rsa_pkcs8_pbes2_pbkdf2_4096_des_sha224.pem |
| |
| keys_rsa_enc_pkcs8_v2_4096_sha224: keys_rsa_enc_pkcs8_v2_4096_3des_sha224 keys_rsa_enc_pkcs8_v2_4096_des_sha224 |
| |
| ### |
| ### PKCS8-v2 encoded, encrypted RSA keys, PRF hmacWithSHA256 |
| ### |
| |
| ### 1024-bit |
| rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha256.der: rsa_pkcs1_1024_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA256 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha256.der |
| rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha256.pem: rsa_pkcs1_1024_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA256 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha256.pem |
| keys_rsa_enc_pkcs8_v2_1024_3des_sha256: rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha256.der rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha256.pem |
| |
| rsa_pkcs8_pbes2_pbkdf2_1024_des_sha256.der: rsa_pkcs1_1024_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA256 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_1024_des_sha256.der |
| rsa_pkcs8_pbes2_pbkdf2_1024_des_sha256.pem: rsa_pkcs1_1024_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA256 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_1024_des_sha256.pem |
| keys_rsa_enc_pkcs8_v2_1024_des_sha256: rsa_pkcs8_pbes2_pbkdf2_1024_des_sha256.der rsa_pkcs8_pbes2_pbkdf2_1024_des_sha256.pem |
| |
| keys_rsa_enc_pkcs8_v2_1024_sha256: keys_rsa_enc_pkcs8_v2_1024_3des_sha256 keys_rsa_enc_pkcs8_v2_1024_des_sha256 |
| |
| ### 2048-bit |
| rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha256.der: rsa_pkcs1_2048_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA256 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha256.der |
| rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha256.pem: rsa_pkcs1_2048_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA256 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha256.pem |
| keys_rsa_enc_pkcs8_v2_2048_3des_sha256: rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha256.der rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha256.pem |
| |
| rsa_pkcs8_pbes2_pbkdf2_2048_des_sha256.der: rsa_pkcs1_2048_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA256 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_2048_des_sha256.der |
| rsa_pkcs8_pbes2_pbkdf2_2048_des_sha256.pem: rsa_pkcs1_2048_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA256 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_2048_des_sha256.pem |
| keys_rsa_enc_pkcs8_v2_2048_des_sha256: rsa_pkcs8_pbes2_pbkdf2_2048_des_sha256.der rsa_pkcs8_pbes2_pbkdf2_2048_des_sha256.pem |
| |
| keys_rsa_enc_pkcs8_v2_2048_sha256: keys_rsa_enc_pkcs8_v2_2048_3des_sha256 keys_rsa_enc_pkcs8_v2_2048_des_sha256 |
| |
| ### 4096-bit |
| rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha256.der: rsa_pkcs1_4096_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA256 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha256.der |
| rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha256.pem: rsa_pkcs1_4096_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA256 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha256.pem |
| keys_rsa_enc_pkcs8_v2_4096_3des_sha256: rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha256.der rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha256.pem |
| |
| rsa_pkcs8_pbes2_pbkdf2_4096_des_sha256.der: rsa_pkcs1_4096_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA256 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_4096_des_sha256.der |
| rsa_pkcs8_pbes2_pbkdf2_4096_des_sha256.pem: rsa_pkcs1_4096_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA256 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_4096_des_sha256.pem |
| keys_rsa_enc_pkcs8_v2_4096_des_sha256: rsa_pkcs8_pbes2_pbkdf2_4096_des_sha256.der rsa_pkcs8_pbes2_pbkdf2_4096_des_sha256.pem |
| |
| keys_rsa_enc_pkcs8_v2_4096_sha256: keys_rsa_enc_pkcs8_v2_4096_3des_sha256 keys_rsa_enc_pkcs8_v2_4096_des_sha256 |
| |
| ### |
| ### PKCS8-v2 encoded, encrypted RSA keys, PRF hmacWithSHA384 |
| ### |
| |
| ### 1024-bit |
| rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha384.der: rsa_pkcs1_1024_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA384 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha384.der |
| rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha384.pem: rsa_pkcs1_1024_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA384 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha384.pem |
| keys_rsa_enc_pkcs8_v2_1024_3des_sha384: rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha384.der rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha384.pem |
| |
| rsa_pkcs8_pbes2_pbkdf2_1024_des_sha384.der: rsa_pkcs1_1024_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA384 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_1024_des_sha384.der |
| rsa_pkcs8_pbes2_pbkdf2_1024_des_sha384.pem: rsa_pkcs1_1024_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA384 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_1024_des_sha384.pem |
| keys_rsa_enc_pkcs8_v2_1024_des_sha384: rsa_pkcs8_pbes2_pbkdf2_1024_des_sha384.der rsa_pkcs8_pbes2_pbkdf2_1024_des_sha384.pem |
| |
| keys_rsa_enc_pkcs8_v2_1024_sha384: keys_rsa_enc_pkcs8_v2_1024_3des_sha384 keys_rsa_enc_pkcs8_v2_1024_des_sha384 |
| |
| ### 2048-bit |
| rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha384.der: rsa_pkcs1_2048_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA384 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha384.der |
| rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha384.pem: rsa_pkcs1_2048_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA384 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha384.pem |
| keys_rsa_enc_pkcs8_v2_2048_3des_sha384: rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha384.der rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha384.pem |
| |
| rsa_pkcs8_pbes2_pbkdf2_2048_des_sha384.der: rsa_pkcs1_2048_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA384 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_2048_des_sha384.der |
| rsa_pkcs8_pbes2_pbkdf2_2048_des_sha384.pem: rsa_pkcs1_2048_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA384 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_2048_des_sha384.pem |
| keys_rsa_enc_pkcs8_v2_2048_des_sha384: rsa_pkcs8_pbes2_pbkdf2_2048_des_sha384.der rsa_pkcs8_pbes2_pbkdf2_2048_des_sha384.pem |
| |
| keys_rsa_enc_pkcs8_v2_2048_sha384: keys_rsa_enc_pkcs8_v2_2048_3des_sha384 keys_rsa_enc_pkcs8_v2_2048_des_sha384 |
| |
| ### 4096-bit |
| rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha384.der: rsa_pkcs1_4096_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA384 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha384.der |
| rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha384.pem: rsa_pkcs1_4096_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA384 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha384.pem |
| keys_rsa_enc_pkcs8_v2_4096_3des_sha384: rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha384.der rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha384.pem |
| |
| rsa_pkcs8_pbes2_pbkdf2_4096_des_sha384.der: rsa_pkcs1_4096_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA384 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_4096_des_sha384.der |
| rsa_pkcs8_pbes2_pbkdf2_4096_des_sha384.pem: rsa_pkcs1_4096_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA384 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_4096_des_sha384.pem |
| keys_rsa_enc_pkcs8_v2_4096_des_sha384: rsa_pkcs8_pbes2_pbkdf2_4096_des_sha384.der rsa_pkcs8_pbes2_pbkdf2_4096_des_sha384.pem |
| |
| keys_rsa_enc_pkcs8_v2_4096_sha384: keys_rsa_enc_pkcs8_v2_4096_3des_sha384 keys_rsa_enc_pkcs8_v2_4096_des_sha384 |
| |
| ### |
| ### PKCS8-v2 encoded, encrypted RSA keys, PRF hmacWithSHA512 |
| ### |
| |
| ### 1024-bit |
| rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha512.der: rsa_pkcs1_1024_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA512 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha512.der |
| rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha512.pem: rsa_pkcs1_1024_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA512 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha512.pem |
| keys_rsa_enc_pkcs8_v2_1024_3des_sha512: rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha512.der rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha512.pem |
| |
| rsa_pkcs8_pbes2_pbkdf2_1024_des_sha512.der: rsa_pkcs1_1024_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA512 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_1024_des_sha512.der |
| rsa_pkcs8_pbes2_pbkdf2_1024_des_sha512.pem: rsa_pkcs1_1024_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA512 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_1024_des_sha512.pem |
| keys_rsa_enc_pkcs8_v2_1024_des_sha512: rsa_pkcs8_pbes2_pbkdf2_1024_des_sha512.der rsa_pkcs8_pbes2_pbkdf2_1024_des_sha512.pem |
| |
| keys_rsa_enc_pkcs8_v2_1024_sha512: keys_rsa_enc_pkcs8_v2_1024_3des_sha512 keys_rsa_enc_pkcs8_v2_1024_des_sha512 |
| |
| ### 2048-bit |
| rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha512.der: rsa_pkcs1_2048_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA512 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha512.der |
| rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha512.pem: rsa_pkcs1_2048_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA512 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha512.pem |
| keys_rsa_enc_pkcs8_v2_2048_3des_sha512: rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha512.der rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha512.pem |
| |
| rsa_pkcs8_pbes2_pbkdf2_2048_des_sha512.der: rsa_pkcs1_2048_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA512 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_2048_des_sha512.der |
| rsa_pkcs8_pbes2_pbkdf2_2048_des_sha512.pem: rsa_pkcs1_2048_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA512 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_2048_des_sha512.pem |
| keys_rsa_enc_pkcs8_v2_2048_des_sha512: rsa_pkcs8_pbes2_pbkdf2_2048_des_sha512.der rsa_pkcs8_pbes2_pbkdf2_2048_des_sha512.pem |
| |
| keys_rsa_enc_pkcs8_v2_2048_sha512: keys_rsa_enc_pkcs8_v2_2048_3des_sha512 keys_rsa_enc_pkcs8_v2_2048_des_sha512 |
| |
| ### 4096-bit |
| rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha512.der: rsa_pkcs1_4096_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA512 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha512.der |
| rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha512.pem: rsa_pkcs1_4096_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA512 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha512.pem |
| keys_rsa_enc_pkcs8_v2_4096_3des_sha512: rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha512.der rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha512.pem |
| |
| rsa_pkcs8_pbes2_pbkdf2_4096_des_sha512.der: rsa_pkcs1_4096_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA512 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_4096_des_sha512.der |
| rsa_pkcs8_pbes2_pbkdf2_4096_des_sha512.pem: rsa_pkcs1_4096_clear.pem |
| $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA512 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" |
| all_final += rsa_pkcs8_pbes2_pbkdf2_4096_des_sha512.pem |
| keys_rsa_enc_pkcs8_v2_4096_des_sha512: rsa_pkcs8_pbes2_pbkdf2_4096_des_sha512.der rsa_pkcs8_pbes2_pbkdf2_4096_des_sha512.pem |
| |
| keys_rsa_enc_pkcs8_v2_4096_sha512: keys_rsa_enc_pkcs8_v2_4096_3des_sha512 keys_rsa_enc_pkcs8_v2_4096_des_sha512 |
| |
| ### |
| ### Rules to generate all RSA keys from a particular class |
| ### |
| |
| ### Generate basic unencrypted RSA keys |
| keys_rsa_unenc: rsa_pkcs1_1024_clear.pem rsa_pkcs1_2048_clear.pem rsa_pkcs1_4096_clear.pem |
| |
| ### Generate PKCS1-encoded encrypted RSA keys |
| keys_rsa_enc_basic: keys_rsa_enc_basic_1024 keys_rsa_enc_basic_2048 keys_rsa_enc_basic_4096 |
| |
| ### Generate PKCS8-v1 encrypted RSA keys |
| keys_rsa_enc_pkcs8_v1: keys_rsa_enc_pkcs8_v1_1024 keys_rsa_enc_pkcs8_v1_2048 keys_rsa_enc_pkcs8_v1_4096 |
| |
| ### Generate PKCS8-v2 encrypted RSA keys |
| keys_rsa_enc_pkcs8_v2: keys_rsa_enc_pkcs8_v2_1024 keys_rsa_enc_pkcs8_v2_2048 keys_rsa_enc_pkcs8_v2_4096 keys_rsa_enc_pkcs8_v2_1024_sha224 keys_rsa_enc_pkcs8_v2_2048_sha224 keys_rsa_enc_pkcs8_v2_4096_sha224 keys_rsa_enc_pkcs8_v2_1024_sha256 keys_rsa_enc_pkcs8_v2_2048_sha256 keys_rsa_enc_pkcs8_v2_4096_sha256 keys_rsa_enc_pkcs8_v2_1024_sha384 keys_rsa_enc_pkcs8_v2_2048_sha384 keys_rsa_enc_pkcs8_v2_4096_sha384 keys_rsa_enc_pkcs8_v2_1024_sha512 keys_rsa_enc_pkcs8_v2_2048_sha512 keys_rsa_enc_pkcs8_v2_4096_sha512 |
| |
| ### Generate all RSA keys |
| keys_rsa_all: keys_rsa_unenc keys_rsa_enc_basic keys_rsa_enc_pkcs8_v1 keys_rsa_enc_pkcs8_v2 |
| |
| ################################################################ |
| #### Generate various EC keys |
| ################################################################ |
| |
| ### |
| ### PKCS8 encoded |
| ### |
| |
| ec_prv.pk8.der: |
| $(OPENSSL) genpkey -algorithm EC -pkeyopt ec_paramgen_curve:prime192v1 -pkeyopt ec_param_enc:named_curve -out $@ -outform DER |
| all_final += ec_prv.pk8.der |
| |
| # ### Instructions for creating `ec_prv.pk8nopub.der`, |
| # ### `ec_prv.pk8nopubparam.der`, and `ec_prv.pk8param.der` by hand from |
| # ### `ec_prv.pk8.der`. |
| # |
| # These instructions assume you are familiar with ASN.1 DER encoding and can |
| # use a hex editor to manipulate DER. |
| # |
| # The relevant ASN.1 definitions for a PKCS#8 encoded Elliptic Curve key are: |
| # |
| # PrivateKeyInfo ::= SEQUENCE { |
| # version Version, |
| # privateKeyAlgorithm PrivateKeyAlgorithmIdentifier, |
| # privateKey PrivateKey, |
| # attributes [0] IMPLICIT Attributes OPTIONAL |
| # } |
| # |
| # AlgorithmIdentifier ::= SEQUENCE { |
| # algorithm OBJECT IDENTIFIER, |
| # parameters ANY DEFINED BY algorithm OPTIONAL |
| # } |
| # |
| # ECParameters ::= CHOICE { |
| # namedCurve OBJECT IDENTIFIER |
| # -- implicitCurve NULL |
| # -- specifiedCurve SpecifiedECDomain |
| # } |
| # |
| # ECPrivateKey ::= SEQUENCE { |
| # version INTEGER { ecPrivkeyVer1(1) } (ecPrivkeyVer1), |
| # privateKey OCTET STRING, |
| # parameters [0] ECParameters {{ NamedCurve }} OPTIONAL, |
| # publicKey [1] BIT STRING OPTIONAL |
| # } |
| # |
| # `ec_prv.pk8.der` as generatde above by OpenSSL should have the following |
| # fields: |
| # |
| # * privateKeyAlgorithm namedCurve |
| # * privateKey.parameters NOT PRESENT |
| # * privateKey.publicKey PRESENT |
| # * attributes NOT PRESENT |
| # |
| # # ec_prv.pk8nopub.der |
| # |
| # Take `ec_prv.pk8.der` and remove `privateKey.publicKey`. |
| # |
| # # ec_prv.pk8nopubparam.der |
| # |
| # Take `ec_prv.pk8nopub.der` and add `privateKey.parameters`, the same value as |
| # `privateKeyAlgorithm.namedCurve`. Don't forget to add the explicit tag. |
| # |
| # # ec_prv.pk8param.der |
| # |
| # Take `ec_prv.pk8.der` and add `privateKey.parameters`, the same value as |
| # `privateKeyAlgorithm.namedCurve`. Don't forget to add the explicit tag. |
| |
| ec_prv.pk8.pem: ec_prv.pk8.der |
| $(OPENSSL) pkey -in $< -inform DER -out $@ |
| all_final += ec_prv.pk8.pem |
| ec_prv.pk8nopub.pem: ec_prv.pk8nopub.der |
| $(OPENSSL) pkey -in $< -inform DER -out $@ |
| all_final += ec_prv.pk8nopub.pem |
| ec_prv.pk8nopubparam.pem: ec_prv.pk8nopubparam.der |
| $(OPENSSL) pkey -in $< -inform DER -out $@ |
| all_final += ec_prv.pk8nopubparam.pem |
| ec_prv.pk8param.pem: ec_prv.pk8param.der |
| $(OPENSSL) pkey -in $< -inform DER -out $@ |
| all_final += ec_prv.pk8param.pem |
| |
| ################################################################ |
| ### Generate CSRs for X.509 write test suite |
| ################################################################ |
| |
| server1.req.sha1: server1.key |
| $(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL,CN=PolarSSL Server 1" md=SHA1 |
| all_final += server1.req.sha1 |
| |
| server1.req.md5: server1.key |
| $(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL,CN=PolarSSL Server 1" md=MD5 |
| all_final += server1.req.md5 |
| |
| server1.req.sha224: server1.key |
| $(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL,CN=PolarSSL Server 1" md=SHA224 |
| all_final += server1.req.sha224 |
| |
| server1.req.sha256: server1.key |
| $(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL,CN=PolarSSL Server 1" md=SHA256 |
| all_final += server1.req.sha256 |
| |
| server1.req.sha384: server1.key |
| $(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL,CN=PolarSSL Server 1" md=SHA384 |
| all_final += server1.req.sha384 |
| |
| server1.req.sha512: server1.key |
| $(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL,CN=PolarSSL Server 1" md=SHA512 |
| all_final += server1.req.sha512 |
| |
| server1.req.cert_type: server1.key |
| $(MBEDTLS_CERT_REQ) output_file=$@ filename=$< ns_cert_type=ssl_server subject_name="C=NL,O=PolarSSL,CN=PolarSSL Server 1" md=SHA1 |
| all_final += server1.req.cert_type |
| |
| server1.req.key_usage: server1.key |
| $(MBEDTLS_CERT_REQ) output_file=$@ filename=$< key_usage=digital_signature,non_repudiation,key_encipherment subject_name="C=NL,O=PolarSSL,CN=PolarSSL Server 1" md=SHA1 |
| all_final += server1.req.key_usage |
| |
| server1.req.ku-ct: server1.key |
| $(MBEDTLS_CERT_REQ) output_file=$@ filename=$< key_usage=digital_signature,non_repudiation,key_encipherment ns_cert_type=ssl_server subject_name="C=NL,O=PolarSSL,CN=PolarSSL Server 1" md=SHA1 |
| all_final += server1.req.ku-ct |
| |
| server1.req.key_usage_empty: server1.key |
| $(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL,CN=PolarSSL Server 1" md=SHA1 force_key_usage=1 |
| all_final += server1.req.key_usage_empty |
| |
| server1.req.cert_type_empty: server1.key |
| $(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL,CN=PolarSSL Server 1" md=SHA1 force_ns_cert_type=1 |
| all_final += server1.req.cert_type_empty |
| |
| # server2* |
| |
| server2_pwd_ec = PolarSSLTest |
| |
| server2.req.sha256: server2.key |
| $(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL,CN=localhost" md=SHA256 |
| all_intermediate += server2.req.sha256 |
| |
| server2.crt.der: server2.crt |
| $(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@ |
| all_final += server2.crt.der |
| |
| server2-sha256.crt.der: server2-sha256.crt |
| $(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@ |
| all_final += server2-sha256.crt.der |
| |
| server2.key.der: server2.key |
| $(OPENSSL) pkey -in $< -out $@ -inform PEM -outform DER |
| all_final += server2.key.der |
| |
| server2.key.enc: server2.key |
| $(OPENSSL) rsa -aes256 -in $< -out $@ -passout "pass:$(server2_pwd_ec)" |
| all_final += server2.key.enc |
| |
| # server5* |
| |
| # The use of 'Server 1' in the DN is intentional here, as the DN is hardcoded in the x509_write test suite.' |
| server5.req.ku.sha1: server5.key |
| $(MBEDTLS_CERT_REQ) output_file=$@ filename=$< key_usage=digital_signature,non_repudiation subject_name="C=NL,O=PolarSSL,CN=PolarSSL Server 1" md=SHA1 |
| all_final += server5.req.ku.sha1 |
| |
| ################################################################ |
| ### Generate certificates for CRT write check tests |
| ################################################################ |
| |
| ### The test files use the Mbed TLS generated certificates server1*.crt, |
| ### but for comparison with OpenSSL also rules for OpenSSL-generated |
| ### certificates server1*.crt.openssl are offered. |
| ### |
| ### Known differences: |
| ### * OpenSSL encodes trailing zero-bits in bit-strings occurring in X.509 extension |
| ### as unused bits, while Mbed TLS doesn't. |
| |
| test_ca_server1_db = test-ca.server1.db |
| test_ca_server1_serial = test-ca.server1.serial |
| test_ca_server1_config_file = test-ca.server1.opensslconf |
| |
| # server1* |
| |
| server1.crt: server1.key server1.req.sha256 $(test_ca_crt) $(test_ca_key_file_rsa) |
| $(MBEDTLS_CERT_WRITE) request_file=server1.req.sha256 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) version=1 not_before=20190210144406 not_after=20290210144406 md=SHA1 version=3 output_file=$@ |
| server1.noauthid.crt: server1.key server1.req.sha256 $(test_ca_crt) $(test_ca_key_file_rsa) |
| $(MBEDTLS_CERT_WRITE) request_file=server1.req.sha256 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA1 authority_identifier=0 version=3 output_file=$@ |
| server1.crt.der: server1.crt |
| $(MBEDTLS_CERT_WRITE) request_file=server1.req.sha256 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA1 authority_identifier=0 version=3 output_file=$@ |
| server1.der: server1.crt |
| $(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@ |
| all_final += server1.crt server1.noauthid.crt server1.crt.der |
| |
| server1.key_usage.crt: server1.key server1.req.sha256 $(test_ca_crt) $(test_ca_key_file_rsa) |
| $(MBEDTLS_CERT_WRITE) request_file=server1.req.sha256 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) version=1 not_before=20190210144406 not_after=20290210144406 md=SHA1 key_usage=digital_signature,non_repudiation,key_encipherment version=3 output_file=$@ |
| server1.key_usage_noauthid.crt: server1.key server1.req.sha256 $(test_ca_crt) $(test_ca_key_file_rsa) |
| $(MBEDTLS_CERT_WRITE) request_file=server1.req.sha256 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) version=1 not_before=20190210144406 not_after=20290210144406 md=SHA1 key_usage=digital_signature,non_repudiation,key_encipherment authority_identifier=0 version=3 output_file=$@ |
| server1.key_usage.der: server1.key_usage.crt |
| $(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@ |
| all_final += server1.key_usage.crt server1.key_usage_noauthid.crt server1.key_usage.der |
| |
| server1.cert_type.crt: server1.key server1.req.sha256 $(test_ca_crt) $(test_ca_key_file_rsa) |
| $(MBEDTLS_CERT_WRITE) request_file=server1.req.sha256 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) version=1 not_before=20190210144406 not_after=20290210144406 md=SHA1 ns_cert_type=ssl_server version=3 output_file=$@ |
| server1.cert_type_noauthid.crt: server1.key server1.req.sha256 $(test_ca_crt) $(test_ca_key_file_rsa) |
| $(MBEDTLS_CERT_WRITE) request_file=server1.req.sha256 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) version=1 not_before=20190210144406 not_after=20290210144406 md=SHA1 ns_cert_type=ssl_server authority_identifier=0 version=3 output_file=$@ |
| server1.cert_type.der: server1.cert_type.crt |
| $(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@ |
| all_final += server1.cert_type.crt server1.cert_type_noauthid.crt server1.cert_type.der |
| |
| server1.v1.crt: server1.key server1.req.sha256 $(test_ca_crt) $(test_ca_key_file_rsa) |
| $(MBEDTLS_CERT_WRITE) request_file=server1.req.sha256 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) version=1 not_before=20190210144406 not_after=20290210144406 md=SHA1 version=1 output_file=$@ |
| server1.v1.der: server1.v1.crt |
| $(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@ |
| all_final += server1.v1.crt server1.v1.der |
| |
| server1.ca.crt: server1.key server1.req.sha256 $(test_ca_crt) $(test_ca_key_file_rsa) |
| $(MBEDTLS_CERT_WRITE) request_file=server1.req.sha256 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) version=1 not_before=20190210144406 not_after=20290210144406 md=SHA1 is_ca=1 version=3 output_file=$@ |
| server1.ca_noauthid.crt: server1.key server1.req.sha256 $(test_ca_crt) $(test_ca_key_file_rsa) |
| $(MBEDTLS_CERT_WRITE) request_file=server1.req.sha256 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA1 authority_identifier=0 is_ca=1 version=3 output_file=$@ |
| server1.ca.der: server1.ca.crt |
| $(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@ |
| all_final += server1.ca.crt server1.ca_noauthid.crt server1.ca.der |
| |
| server1_ca.crt: server1.crt $(test_ca_crt) |
| cat server1.crt $(test_ca_crt) > $@ |
| all_final += server1_ca.crt |
| |
| cert_sha1.crt: server1.key |
| $(MBEDTLS_CERT_WRITE) subject_key=server1.key subject_name="C=NL, O=PolarSSL, CN=PolarSSL Cert SHA1" serial=7 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA1 version=3 output_file=$@ |
| all_final += cert_sha1.crt |
| |
| cert_sha224.crt: server1.key |
| $(MBEDTLS_CERT_WRITE) subject_key=server1.key subject_name="C=NL, O=PolarSSL, CN=PolarSSL Cert SHA224" serial=8 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA224 version=3 output_file=$@ |
| all_final += cert_sha224.crt |
| |
| cert_sha256.crt: server1.key |
| $(MBEDTLS_CERT_WRITE) subject_key=server1.key subject_name="C=NL, O=PolarSSL, CN=PolarSSL Cert SHA256" serial=9 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA256 version=3 output_file=$@ |
| all_final += cert_sha256.crt |
| |
| cert_sha384.crt: server1.key |
| $(MBEDTLS_CERT_WRITE) subject_key=server1.key subject_name="C=NL, O=PolarSSL, CN=PolarSSL Cert SHA384" serial=10 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA384 version=3 output_file=$@ |
| all_final += cert_sha384.crt |
| |
| cert_sha512.crt: server1.key |
| $(MBEDTLS_CERT_WRITE) subject_key=server1.key subject_name="C=NL, O=PolarSSL, CN=PolarSSL Cert SHA512" serial=11 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA512 version=3 output_file=$@ |
| all_final += cert_sha512.crt |
| |
| cert_example_wildcard.crt: server1.key |
| $(MBEDTLS_CERT_WRITE) subject_key=server1.key subject_name="C=NL, O=PolarSSL, CN=*.example.com" serial=12 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA1 version=3 output_file=$@ |
| all_final += cert_example_wildcard.crt |
| |
| # OpenSSL-generated certificates for comparison |
| # Also provide certificates in DER format to allow |
| # direct binary comparison using e.g. dumpasn1 |
| server1.crt.openssl server1.key_usage.crt.openssl server1.cert_type.crt.openssl: server1.key server1.req.sha256 $(test_ca_crt) $(test_ca_key_file_rsa) $(test_ca_server1_config_file) |
| echo "01" > $(test_ca_server1_serial) |
| rm -f $(test_ca_server1_db) |
| touch $(test_ca_server1_db) |
| $(OPENSSL) ca -batch -passin "pass:$(test_ca_pwd_rsa)" -config $(test_ca_server1_config_file) -in server1.req.sha256 -extensions v3_ext -extfile $@.v3_ext -out $@ |
| server1.der.openssl: server1.crt.openssl |
| $(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@ |
| server1.key_usage.der.openssl: server1.key_usage.crt.openssl |
| $(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@ |
| server1.cert_type.der.openssl: server1.cert_type.crt.openssl |
| $(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@ |
| |
| server1.v1.crt.openssl: server1.key server1.req.sha256 $(test_ca_crt) $(test_ca_key_file_rsa) $(test_ca_server1_config_file) |
| echo "01" > $(test_ca_server1_serial) |
| rm -f $(test_ca_server1_db) |
| touch $(test_ca_server1_db) |
| $(OPENSSL) ca -batch -passin "pass:$(test_ca_pwd_rsa)" -config $(test_ca_server1_config_file) -in server1.req.sha256 -out $@ |
| server1.v1.der.openssl: server1.v1.crt.openssl |
| $(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@ |
| |
| # To revoke certificate in the openssl database: |
| # |
| # $(OPENSSL) ca -gencrl -batch -cert $(test_ca_crt) -keyfile $(test_ca_key_file_rsa) -key $(test_ca_pwd_rsa) -config $(test_ca_server1_config_file) -md sha256 -crldays 365 -revoke server1.crt |
| |
| crl.pem: $(test_ca_crt) $(test_ca_key_file_rsa) $(test_ca_config_file) |
| $(OPENSSL) ca -gencrl -batch -cert $(test_ca_crt) -keyfile $(test_ca_key_file_rsa) -key $(test_ca_pwd_rsa) -config $(test_ca_server1_config_file) -md sha1 -crldays 3653 -out $@ |
| |
| crl-futureRevocationDate.pem: $(test_ca_crt) $(test_ca_key_file_rsa) $(test_ca_config_file) test-ca.server1.future-crl.db test-ca.server1.future-crl.opensslconf |
| $(FAKETIME) '2028-12-31' $(OPENSSL) ca -gencrl -config test-ca.server1.future-crl.opensslconf -crldays 365 -passin "pass:$(test_ca_pwd_rsa)" -out $@ |
| |
| server1_all: crl.pem crl-futureRevocationDate.pem server1.crt server1.noauthid.crt server1.crt.openssl server1.v1.crt server1.v1.crt.openssl server1.key_usage.crt server1.key_usage_noauthid.crt server1.key_usage.crt.openssl server1.cert_type.crt server1.cert_type_noauthid.crt server1.cert_type.crt.openssl server1.der server1.der.openssl server1.v1.der server1.v1.der.openssl server1.key_usage.der server1.key_usage.der.openssl server1.cert_type.der server1.cert_type.der.openssl |
| |
| # server2* |
| |
| server2.crt: server2.req.sha256 |
| $(MBEDTLS_CERT_WRITE) request_file=server2.req.sha256 serial=2 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA1 version=3 output_file=$@ |
| all_final += server2.crt |
| |
| server2.der: server2.crt |
| $(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@ |
| all_final += server2.crt server2.der |
| |
| server2-sha256.crt: server2.req.sha256 |
| $(MBEDTLS_CERT_WRITE) request_file=server2.req.sha256 serial=2 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA256 version=3 output_file=$@ |
| all_final += server2-sha256.crt |
| |
| # MD5 test certificate |
| |
| cert_md_test_key = $(cli_crt_key_file_rsa) |
| |
| cert_md5.csr: $(cert_md_test_key) |
| $(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL,CN=PolarSSL Cert MD5" md=MD5 |
| all_intermediate += cert_md5.csr |
| |
| cert_md5.crt: cert_md5.csr |
| $(MBEDTLS_CERT_WRITE) request_file=$< serial=6 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20000101121212 not_after=20300101121212 md=MD5 version=3 output_file=$@ |
| all_final += cert_md5.crt |
| |
| # TLSv1.3 test certificates |
| ecdsa_secp256r1.key: ec_256_prv.pem |
| cp $< $@ |
| |
| ecdsa_secp256r1.csr: ecdsa_secp256r1.key |
| $(OPENSSL) req -new -subj "/C=NL/O=PolarSSL/CN=localhost" \ |
| -key $< -out $@ |
| all_intermediate += ecdsa_secp256r1.csr |
| ecdsa_secp256r1.crt: ecdsa_secp256r1.csr |
| $(OPENSSL) x509 -req -CA $(test_ca_crt_file_ec) -CAkey $(test_ca_key_file_ec) \ |
| -set_serial 77 -days 3653 -sha384 -in $< -out $@ |
| all_final += ecdsa_secp256r1.crt ecdsa_secp256r1.key |
| tls13_certs: ecdsa_secp256r1.crt ecdsa_secp256r1.key |
| |
| ecdsa_secp384r1.key: ec_384_prv.pem |
| cp $< $@ |
| ecdsa_secp384r1.csr: ecdsa_secp384r1.key |
| $(OPENSSL) req -new -subj "/C=NL/O=PolarSSL/CN=localhost" \ |
| -key $< -out $@ |
| all_intermediate += ecdsa_secp384r1.csr |
| ecdsa_secp384r1.crt: ecdsa_secp384r1.csr |
| $(OPENSSL) x509 -req -CA $(test_ca_crt_file_ec) -CAkey $(test_ca_key_file_ec) \ |
| -set_serial 77 -days 3653 -sha384 -in $< -out $@ |
| all_final += ecdsa_secp384r1.crt ecdsa_secp384r1.key |
| tls13_certs: ecdsa_secp384r1.crt ecdsa_secp384r1.key |
| |
| ecdsa_secp521r1.key: ec_521_prv.pem |
| cp $< $@ |
| ecdsa_secp521r1.csr: ecdsa_secp521r1.key |
| $(OPENSSL) req -new -subj "/C=NL/O=PolarSSL/CN=localhost" \ |
| -key $< -out $@ |
| all_intermediate += ecdsa_secp521r1.csr |
| ecdsa_secp521r1.crt: ecdsa_secp521r1.csr |
| $(OPENSSL) x509 -req -CA $(test_ca_crt_file_ec) -CAkey $(test_ca_key_file_ec) \ |
| -set_serial 77 -days 3653 -sha384 -in $< -out $@ |
| all_final += ecdsa_secp521r1.crt ecdsa_secp521r1.key |
| tls13_certs: ecdsa_secp521r1.crt ecdsa_secp521r1.key |
| |
| ################################################################ |
| #### Diffie-Hellman parameters |
| ################################################################ |
| |
| dh.998.pem: |
| $(OPENSSL) dhparam -out $@ -text 998 |
| |
| dh.999.pem: |
| $(OPENSSL) dhparam -out $@ -text 999 |
| |
| ################################################################ |
| #### Meta targets |
| ################################################################ |
| |
| all_final: $(all_final) |
| all: $(all_intermediate) $(all_final) |
| |
| .PHONY: default all_final all |
| .PHONY: keys_rsa_all |
| .PHONY: keys_rsa_unenc keys_rsa_enc_basic |
| .PHONY: keys_rsa_enc_pkcs8_v1 keys_rsa_enc_pkcs8_v2 |
| .PHONY: keys_rsa_enc_basic_1024 keys_rsa_enc_basic_2048 keys_rsa_enc_basic_4096 |
| .PHONY: keys_rsa_enc_pkcs8_v1_1024 keys_rsa_enc_pkcs8_v2_1024 |
| .PHONY: keys_rsa_enc_pkcs8_v1_2048 keys_rsa_enc_pkcs8_v2_2048 |
| .PHONY: keys_rsa_enc_pkcs8_v1_4096 keys_rsa_enc_pkcs8_v2_4096 |
| .PHONY: server1_all |
| |
| # These files should not be committed to the repository. |
| list_intermediate: |
| @printf '%s\n' $(all_intermediate) | sort |
| # These files should be committed to the repository so that the test data is |
| # available upon checkout without running a randomized process depending on |
| # third-party tools. |
| list_final: |
| @printf '%s\n' $(all_final) | sort |
| .PHONY: list_intermediate list_final |
| |
| ## Remove intermediate files |
| clean: |
| rm -f $(all_intermediate) |
| ## Remove all build products, even the ones that are committed |
| neat: clean |
| rm -f $(all_final) |
| .PHONY: clean neat |
