blob: 6a09da88b55b3f15c6789011bdf6c3d63e5c24a5 [file] [log] [blame]
/**
* \file camellia.h
*
* \brief Camellia block cipher
*/
/*
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef MBEDTLS_CAMELLIA_H
#define MBEDTLS_CAMELLIA_H
#include "mbedtls/private_access.h"
#include "mbedtls/build_info.h"
#include <stddef.h>
#include <stdint.h>
#include "mbedtls/platform_util.h"
#define MBEDTLS_CAMELLIA_ENCRYPT 1
#define MBEDTLS_CAMELLIA_DECRYPT 0
#define MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA -0x0024 /**< Bad input data. */
#define MBEDTLS_ERR_CAMELLIA_INVALID_INPUT_LENGTH -0x0026 /**< Invalid data input length. */
#ifdef __cplusplus
extern "C" {
#endif
#if !defined(MBEDTLS_CAMELLIA_ALT)
// Regular implementation
//
/**
* \brief CAMELLIA context structure
*/
typedef struct mbedtls_camellia_context
{
int MBEDTLS_PRIVATE(nr); /*!< number of rounds */
uint32_t MBEDTLS_PRIVATE(rk)[68]; /*!< CAMELLIA round keys */
}
mbedtls_camellia_context;
#else /* MBEDTLS_CAMELLIA_ALT */
#include "camellia_alt.h"
#endif /* MBEDTLS_CAMELLIA_ALT */
/**
* \brief Initialize a CAMELLIA context.
*
* \param ctx The CAMELLIA context to be initialized.
* This must not be \c NULL.
*/
void mbedtls_camellia_init( mbedtls_camellia_context *ctx );
/**
* \brief Clear a CAMELLIA context.
*
* \param ctx The CAMELLIA context to be cleared. This may be \c NULL,
* in which case this function returns immediately. If it is not
* \c NULL, it must be initialized.
*/
void mbedtls_camellia_free( mbedtls_camellia_context *ctx );
/**
* \brief Perform a CAMELLIA key schedule operation for encryption.
*
* \param ctx The CAMELLIA context to use. This must be initialized.
* \param key The encryption key to use. This must be a readable buffer
* of size \p keybits Bits.
* \param keybits The length of \p key in Bits. This must be either \c 128,
* \c 192 or \c 256.
*
* \return \c 0 if successful.
* \return A negative error code on failure.
*/
int mbedtls_camellia_setkey_enc( mbedtls_camellia_context *ctx,
const unsigned char *key,
unsigned int keybits );
/**
* \brief Perform a CAMELLIA key schedule operation for decryption.
*
* \param ctx The CAMELLIA context to use. This must be initialized.
* \param key The decryption key. This must be a readable buffer
* of size \p keybits Bits.
* \param keybits The length of \p key in Bits. This must be either \c 128,
* \c 192 or \c 256.
*
* \return \c 0 if successful.
* \return A negative error code on failure.
*/
int mbedtls_camellia_setkey_dec( mbedtls_camellia_context *ctx,
const unsigned char *key,
unsigned int keybits );
/**
* \brief Perform a CAMELLIA-ECB block encryption/decryption operation.
*
* \param ctx The CAMELLIA context to use. This must be initialized
* and bound to a key.
* \param mode The mode of operation. This must be either
* #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT.
* \param input The input block. This must be a readable buffer
* of size \c 16 Bytes.
* \param output The output block. This must be a writable buffer
* of size \c 16 Bytes.
*
* \return \c 0 if successful.
* \return A negative error code on failure.
*/
int mbedtls_camellia_crypt_ecb( mbedtls_camellia_context *ctx,
int mode,
const unsigned char input[16],
unsigned char output[16] );
#if defined(MBEDTLS_CIPHER_MODE_CBC)
/**
* \brief Perform a CAMELLIA-CBC buffer encryption/decryption operation.
*
* \note Upon exit, the content of the IV is updated so that you can
* call the function same function again on the following
* block(s) of data and get the same result as if it was
* encrypted in one call. This allows a "streaming" usage.
* If on the other hand you need to retain the contents of the
* IV, you should either save it manually or use the cipher
* module instead.
*
* \param ctx The CAMELLIA context to use. This must be initialized
* and bound to a key.
* \param mode The mode of operation. This must be either
* #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT.
* \param length The length in Bytes of the input data \p input.
* This must be a multiple of \c 16 Bytes.
* \param iv The initialization vector. This must be a read/write buffer
* of length \c 16 Bytes. It is updated to allow streaming
* use as explained above.
* \param input The buffer holding the input data. This must point to a
* readable buffer of length \p length Bytes.
* \param output The buffer holding the output data. This must point to a
* writable buffer of length \p length Bytes.
*
* \return \c 0 if successful.
* \return A negative error code on failure.
*/
int mbedtls_camellia_crypt_cbc( mbedtls_camellia_context *ctx,
int mode,
size_t length,
unsigned char iv[16],
const unsigned char *input,
unsigned char *output );
#endif /* MBEDTLS_CIPHER_MODE_CBC */
#if defined(MBEDTLS_CIPHER_MODE_CFB)
/**
* \brief Perform a CAMELLIA-CFB128 buffer encryption/decryption
* operation.
*
* \note Due to the nature of CFB mode, you should use the same
* key for both encryption and decryption. In particular, calls
* to this function should be preceded by a key-schedule via
* mbedtls_camellia_setkey_enc() regardless of whether \p mode
* is #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT.
*
* \note Upon exit, the content of the IV is updated so that you can
* call the function same function again on the following
* block(s) of data and get the same result as if it was
* encrypted in one call. This allows a "streaming" usage.
* If on the other hand you need to retain the contents of the
* IV, you should either save it manually or use the cipher
* module instead.
*
* \param ctx The CAMELLIA context to use. This must be initialized
* and bound to a key.
* \param mode The mode of operation. This must be either
* #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT.
* \param length The length of the input data \p input. Any value is allowed.
* \param iv_off The current offset in the IV. This must be smaller
* than \c 16 Bytes. It is updated after this call to allow
* the aforementioned streaming usage.
* \param iv The initialization vector. This must be a read/write buffer
* of length \c 16 Bytes. It is updated after this call to
* allow the aforementioned streaming usage.
* \param input The buffer holding the input data. This must be a readable
* buffer of size \p length Bytes.
* \param output The buffer to hold the output data. This must be a writable
* buffer of length \p length Bytes.
*
* \return \c 0 if successful.
* \return A negative error code on failure.
*/
int mbedtls_camellia_crypt_cfb128( mbedtls_camellia_context *ctx,
int mode,
size_t length,
size_t *iv_off,
unsigned char iv[16],
const unsigned char *input,
unsigned char *output );
#endif /* MBEDTLS_CIPHER_MODE_CFB */
#if defined(MBEDTLS_CIPHER_MODE_CTR)
/**
* \brief Perform a CAMELLIA-CTR buffer encryption/decryption operation.
*
* *note Due to the nature of CTR mode, you should use the same
* key for both encryption and decryption. In particular, calls
* to this function should be preceded by a key-schedule via
* mbedtls_camellia_setkey_enc() regardless of whether \p mode
* is #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT.
*
* \warning You must never reuse a nonce value with the same key. Doing so
* would void the encryption for the two messages encrypted with
* the same nonce and key.
*
* There are two common strategies for managing nonces with CTR:
*
* 1. You can handle everything as a single message processed over
* successive calls to this function. In that case, you want to
* set \p nonce_counter and \p nc_off to 0 for the first call, and
* then preserve the values of \p nonce_counter, \p nc_off and \p
* stream_block across calls to this function as they will be
* updated by this function.
*
* With this strategy, you must not encrypt more than 2**128
* blocks of data with the same key.
*
* 2. You can encrypt separate messages by dividing the \p
* nonce_counter buffer in two areas: the first one used for a
* per-message nonce, handled by yourself, and the second one
* updated by this function internally.
*
* For example, you might reserve the first \c 12 Bytes for the
* per-message nonce, and the last \c 4 Bytes for internal use.
* In that case, before calling this function on a new message you
* need to set the first \c 12 Bytes of \p nonce_counter to your
* chosen nonce value, the last four to \c 0, and \p nc_off to \c 0
* (which will cause \p stream_block to be ignored). That way, you
* can encrypt at most \c 2**96 messages of up to \c 2**32 blocks
* each with the same key.
*
* The per-message nonce (or information sufficient to reconstruct
* it) needs to be communicated with the ciphertext and must be
* unique. The recommended way to ensure uniqueness is to use a
* message counter. An alternative is to generate random nonces,
* but this limits the number of messages that can be securely
* encrypted: for example, with 96-bit random nonces, you should
* not encrypt more than 2**32 messages with the same key.
*
* Note that for both stategies, sizes are measured in blocks and
* that a CAMELLIA block is \c 16 Bytes.
*
* \warning Upon return, \p stream_block contains sensitive data. Its
* content must not be written to insecure storage and should be
* securely discarded as soon as it's no longer needed.
*
* \param ctx The CAMELLIA context to use. This must be initialized
* and bound to a key.
* \param length The length of the input data \p input in Bytes.
* Any value is allowed.
* \param nc_off The offset in the current \p stream_block (for resuming
* within current cipher stream). The offset pointer to
* should be \c 0 at the start of a stream. It is updated
* at the end of this call.
* \param nonce_counter The 128-bit nonce and counter. This must be a read/write
* buffer of length \c 16 Bytes.
* \param stream_block The saved stream-block for resuming. This must be a
* read/write buffer of length \c 16 Bytes.
* \param input The input data stream. This must be a readable buffer of
* size \p length Bytes.
* \param output The output data stream. This must be a writable buffer
* of size \p length Bytes.
*
* \return \c 0 if successful.
* \return A negative error code on failure.
*/
int mbedtls_camellia_crypt_ctr( mbedtls_camellia_context *ctx,
size_t length,
size_t *nc_off,
unsigned char nonce_counter[16],
unsigned char stream_block[16],
const unsigned char *input,
unsigned char *output );
#endif /* MBEDTLS_CIPHER_MODE_CTR */
#if defined(MBEDTLS_SELF_TEST)
/**
* \brief Checkup routine
*
* \return 0 if successful, or 1 if the test failed
*/
int mbedtls_camellia_self_test( int verbose );
#endif /* MBEDTLS_SELF_TEST */
#ifdef __cplusplus
}
#endif
#endif /* camellia.h */