| /** |
| * \file error.h |
| * |
| * \brief Error to string translation |
| */ |
| /* |
| * Copyright The Mbed TLS Contributors |
| * SPDX-License-Identifier: Apache-2.0 |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); you may |
| * not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| #ifndef MBEDTLS_ERROR_H |
| #define MBEDTLS_ERROR_H |
| |
| #include "mbedtls/build_info.h" |
| |
| #include <stddef.h> |
| |
| #if ( defined(__ARMCC_VERSION) || defined(_MSC_VER) ) && \ |
| !defined(inline) && !defined(__cplusplus) |
| #define inline __inline |
| #endif |
| |
| /** |
| * Error code layout. |
| * |
| * Currently we try to keep all error codes within the negative space of 16 |
| * bits signed integers to support all platforms (-0x0001 - -0x7FFF). In |
| * addition we'd like to give two layers of information on the error if |
| * possible. |
| * |
| * For that purpose the error codes are segmented in the following manner: |
| * |
| * 16 bit error code bit-segmentation |
| * |
| * 1 bit - Unused (sign bit) |
| * 3 bits - High level module ID |
| * 5 bits - Module-dependent error code |
| * 7 bits - Low level module errors |
| * |
| * For historical reasons, low-level error codes are divided in even and odd, |
| * even codes were assigned first, and -1 is reserved for other errors. |
| * |
| * Low-level module errors (0x0002-0x007E, 0x0001-0x007F) |
| * |
| * Module Nr Codes assigned |
| * ERROR 2 0x006E 0x0001 |
| * MPI 7 0x0002-0x0010 |
| * GCM 3 0x0012-0x0014 0x0013-0x0013 |
| * THREADING 3 0x001A-0x001E |
| * AES 5 0x0020-0x0022 0x0021-0x0025 |
| * CAMELLIA 3 0x0024-0x0026 0x0027-0x0027 |
| * BASE64 2 0x002A-0x002C |
| * OID 1 0x002E-0x002E 0x000B-0x000B |
| * PADLOCK 1 0x0030-0x0030 |
| * DES 2 0x0032-0x0032 0x0033-0x0033 |
| * CTR_DBRG 4 0x0034-0x003A |
| * ENTROPY 3 0x003C-0x0040 0x003D-0x003F |
| * NET 13 0x0042-0x0052 0x0043-0x0049 |
| * ARIA 4 0x0058-0x005E |
| * ASN1 7 0x0060-0x006C |
| * CMAC 1 0x007A-0x007A |
| * PBKDF2 1 0x007C-0x007C |
| * HMAC_DRBG 4 0x0003-0x0009 |
| * CCM 3 0x000D-0x0011 |
| * MD5 1 0x002F-0x002F |
| * RIPEMD160 1 0x0031-0x0031 |
| * SHA1 1 0x0035-0x0035 0x0073-0x0073 |
| * SHA256 1 0x0037-0x0037 0x0074-0x0074 |
| * SHA512 1 0x0039-0x0039 0x0075-0x0075 |
| * CHACHA20 3 0x0051-0x0055 |
| * POLY1305 3 0x0057-0x005B |
| * CHACHAPOLY 2 0x0054-0x0056 |
| * PLATFORM 2 0x0070-0x0072 |
| * |
| * High-level module nr (3 bits - 0x0...-0x7...) |
| * Name ID Nr of Errors |
| * PEM 1 9 |
| * PKCS#12 1 4 (Started from top) |
| * X509 2 20 |
| * PKCS5 2 4 (Started from top) |
| * DHM 3 11 |
| * PK 3 15 (Started from top) |
| * RSA 4 11 |
| * ECP 4 10 (Started from top) |
| * MD 5 5 |
| * HKDF 5 1 (Started from top) |
| * SSL 5 2 (Started from 0x5F00) |
| * CIPHER 6 8 (Started from 0x6080) |
| * SSL 6 23 (Started from top, plus 0x6000, gaps at |
| * 0x6600) |
| * SSL 7 28 (Started from 0x7080, gaps at |
| * 0x7300, 0x7500, 0x7580, 0x7800) |
| * |
| * Module dependent error code (5 bits 0x.00.-0x.F8.) |
| */ |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| #define MBEDTLS_ERR_ERROR_GENERIC_ERROR -0x0001 /**< Generic error */ |
| #define MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED -0x006E /**< This is a bug in the library */ |
| |
| #define MBEDTLS_ERR_PLATFORM_HW_ACCEL_FAILED -0x0070 /**< Hardware accelerator failed */ |
| #define MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED -0x0072 /**< The requested feature is not supported by the platform */ |
| |
| /** |
| * \brief Combines a high-level and low-level error code together. |
| * |
| * Wrapper macro for mbedtls_error_add(). See that function for |
| * more details. |
| */ |
| #define MBEDTLS_ERROR_ADD( high, low ) \ |
| mbedtls_error_add( high, low, __FILE__, __LINE__ ) |
| |
| #if defined(MBEDTLS_TEST_HOOKS) |
| /** |
| * \brief Testing hook called before adding/combining two error codes together. |
| * Only used when invasive testing is enabled via MBEDTLS_TEST_HOOKS. |
| */ |
| extern void (*mbedtls_test_hook_error_add)( int, int, const char *, int ); |
| #endif |
| |
| /** |
| * \brief Combines a high-level and low-level error code together. |
| * |
| * This function can be called directly however it is usually |
| * called via the #MBEDTLS_ERROR_ADD macro. |
| * |
| * While a value of zero is not a negative error code, it is still an |
| * error code (that denotes success) and can be combined with both a |
| * negative error code or another value of zero. |
| * |
| * \note When invasive testing is enabled via #MBEDTLS_TEST_HOOKS, also try to |
| * call \link mbedtls_test_hook_error_add \endlink. |
| * |
| * \param high high-level error code. See error.h for more details. |
| * \param low low-level error code. See error.h for more details. |
| * \param file file where this error code addition occurred. |
| * \param line line where this error code addition occurred. |
| */ |
| static inline int mbedtls_error_add( int high, int low, |
| const char *file, int line ) |
| { |
| #if defined(MBEDTLS_TEST_HOOKS) |
| if( *mbedtls_test_hook_error_add != NULL ) |
| ( *mbedtls_test_hook_error_add )( high, low, file, line ); |
| #endif |
| (void)file; |
| (void)line; |
| |
| return( high + low ); |
| } |
| |
| /** |
| * \brief Translate a mbed TLS error code into a string representation, |
| * Result is truncated if necessary and always includes a terminating |
| * null byte. |
| * |
| * \param errnum error code |
| * \param buffer buffer to place representation in |
| * \param buflen length of the buffer |
| */ |
| void mbedtls_strerror( int errnum, char *buffer, size_t buflen ); |
| |
| /** |
| * \brief Translate the high-level part of an Mbed TLS error code into a string |
| * representation. |
| * |
| * This function returns a const pointer to an un-modifiable string. The caller |
| * must not try to modify the string. It is intended to be used mostly for |
| * logging purposes. |
| * |
| * \param error_code error code |
| * |
| * \return The string representation of the error code, or \c NULL if the error |
| * code is unknown. |
| */ |
| const char * mbedtls_high_level_strerr( int error_code ); |
| |
| /** |
| * \brief Translate the low-level part of an Mbed TLS error code into a string |
| * representation. |
| * |
| * This function returns a const pointer to an un-modifiable string. The caller |
| * must not try to modify the string. It is intended to be used mostly for |
| * logging purposes. |
| * |
| * \param error_code error code |
| * |
| * \return The string representation of the error code, or \c NULL if the error |
| * code is unknown. |
| */ |
| const char * mbedtls_low_level_strerr( int error_code ); |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* error.h */ |
