blob: d1219bb1a46537807d824864f7bc06747b19da76 [file] [log] [blame]
/**
* \file gcm.h
*
* \brief This file contains GCM definitions and functions.
*
* The Galois/Counter Mode (GCM) for 128-bit block ciphers is defined
* in <em>D. McGrew, J. Viega, The Galois/Counter Mode of Operation
* (GCM), Natl. Inst. Stand. Technol.</em>
*
* For more information on GCM, see <em>NIST SP 800-38D: Recommendation for
* Block Cipher Modes of Operation: Galois/Counter Mode (GCM) and GMAC</em>.
*
*/
/*
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef MBEDTLS_GCM_H
#define MBEDTLS_GCM_H
#include "mbedtls/private_access.h"
#include "mbedtls/build_info.h"
#include "mbedtls/cipher.h"
#include <stdint.h>
#define MBEDTLS_GCM_ENCRYPT 1
#define MBEDTLS_GCM_DECRYPT 0
#define MBEDTLS_ERR_GCM_AUTH_FAILED -0x0012 /**< Authenticated decryption failed. */
#define MBEDTLS_ERR_GCM_BAD_INPUT -0x0014 /**< Bad input parameters to function. */
#ifdef __cplusplus
extern "C" {
#endif
#if !defined(MBEDTLS_GCM_ALT)
/**
* \brief The GCM context structure.
*/
typedef struct mbedtls_gcm_context
{
mbedtls_cipher_context_t MBEDTLS_PRIVATE(cipher_ctx); /*!< The cipher context used. */
uint64_t MBEDTLS_PRIVATE(HL)[16]; /*!< Precalculated HTable low. */
uint64_t MBEDTLS_PRIVATE(HH)[16]; /*!< Precalculated HTable high. */
uint64_t MBEDTLS_PRIVATE(len); /*!< The total length of the encrypted data. */
uint64_t MBEDTLS_PRIVATE(add_len); /*!< The total length of the additional data. */
unsigned char MBEDTLS_PRIVATE(base_ectr)[16]; /*!< The first ECTR for tag. */
unsigned char MBEDTLS_PRIVATE(y)[16]; /*!< The Y working value. */
unsigned char MBEDTLS_PRIVATE(buf)[16]; /*!< The buf working value. */
int MBEDTLS_PRIVATE(mode); /*!< The operation to perform:
#MBEDTLS_GCM_ENCRYPT or
#MBEDTLS_GCM_DECRYPT. */
}
mbedtls_gcm_context;
#else /* !MBEDTLS_GCM_ALT */
#include "gcm_alt.h"
#endif /* !MBEDTLS_GCM_ALT */
/**
* \brief This function initializes the specified GCM context,
* to make references valid, and prepares the context
* for mbedtls_gcm_setkey() or mbedtls_gcm_free().
*
* The function does not bind the GCM context to a particular
* cipher, nor set the key. For this purpose, use
* mbedtls_gcm_setkey().
*
* \param ctx The GCM context to initialize. This must not be \c NULL.
*/
void mbedtls_gcm_init( mbedtls_gcm_context *ctx );
/**
* \brief This function associates a GCM context with a
* cipher algorithm and a key.
*
* \param ctx The GCM context. This must be initialized.
* \param cipher The 128-bit block cipher to use.
* \param key The encryption key. This must be a readable buffer of at
* least \p keybits bits.
* \param keybits The key size in bits. Valid options are:
* <ul><li>128 bits</li>
* <li>192 bits</li>
* <li>256 bits</li></ul>
*
* \return \c 0 on success.
* \return A cipher-specific error code on failure.
*/
int mbedtls_gcm_setkey( mbedtls_gcm_context *ctx,
mbedtls_cipher_id_t cipher,
const unsigned char *key,
unsigned int keybits );
/**
* \brief This function performs GCM encryption or decryption of a buffer.
*
* \note For encryption, the output buffer can be the same as the
* input buffer. For decryption, the output buffer cannot be
* the same as input buffer. If the buffers overlap, the output
* buffer must trail at least 8 Bytes behind the input buffer.
*
* \warning When this function performs a decryption, it outputs the
* authentication tag and does not verify that the data is
* authentic. You should use this function to perform encryption
* only. For decryption, use mbedtls_gcm_auth_decrypt() instead.
*
* \param ctx The GCM context to use for encryption or decryption. This
* must be initialized.
* \param mode The operation to perform:
* - #MBEDTLS_GCM_ENCRYPT to perform authenticated encryption.
* The ciphertext is written to \p output and the
* authentication tag is written to \p tag.
* - #MBEDTLS_GCM_DECRYPT to perform decryption.
* The plaintext is written to \p output and the
* authentication tag is written to \p tag.
* Note that this mode is not recommended, because it does
* not verify the authenticity of the data. For this reason,
* you should use mbedtls_gcm_auth_decrypt() instead of
* calling this function in decryption mode.
* \param length The length of the input data, which is equal to the length
* of the output data.
* \param iv The initialization vector. This must be a readable buffer of
* at least \p iv_len Bytes.
* \param iv_len The length of the IV.
* \param add The buffer holding the additional data. This must be of at
* least that size in Bytes.
* \param add_len The length of the additional data.
* \param input The buffer holding the input data. If \p length is greater
* than zero, this must be a readable buffer of at least that
* size in Bytes.
* \param output The buffer for holding the output data. If \p length is greater
* than zero, this must be a writable buffer of at least that
* size in Bytes.
* \param tag_len The length of the tag to generate.
* \param tag The buffer for holding the tag. This must be a writable
* buffer of at least \p tag_len Bytes.
*
* \return \c 0 if the encryption or decryption was performed
* successfully. Note that in #MBEDTLS_GCM_DECRYPT mode,
* this does not indicate that the data is authentic.
* \return #MBEDTLS_ERR_GCM_BAD_INPUT if the lengths or pointers are
* not valid or a cipher-specific error code if the encryption
* or decryption failed.
*/
int mbedtls_gcm_crypt_and_tag( mbedtls_gcm_context *ctx,
int mode,
size_t length,
const unsigned char *iv,
size_t iv_len,
const unsigned char *add,
size_t add_len,
const unsigned char *input,
unsigned char *output,
size_t tag_len,
unsigned char *tag );
/**
* \brief This function performs a GCM authenticated decryption of a
* buffer.
*
* \note For decryption, the output buffer cannot be the same as
* input buffer. If the buffers overlap, the output buffer
* must trail at least 8 Bytes behind the input buffer.
*
* \param ctx The GCM context. This must be initialized.
* \param length The length of the ciphertext to decrypt, which is also
* the length of the decrypted plaintext.
* \param iv The initialization vector. This must be a readable buffer
* of at least \p iv_len Bytes.
* \param iv_len The length of the IV.
* \param add The buffer holding the additional data. This must be of at
* least that size in Bytes.
* \param add_len The length of the additional data.
* \param tag The buffer holding the tag to verify. This must be a
* readable buffer of at least \p tag_len Bytes.
* \param tag_len The length of the tag to verify.
* \param input The buffer holding the ciphertext. If \p length is greater
* than zero, this must be a readable buffer of at least that
* size.
* \param output The buffer for holding the decrypted plaintext. If \p length
* is greater than zero, this must be a writable buffer of at
* least that size.
*
* \return \c 0 if successful and authenticated.
* \return #MBEDTLS_ERR_GCM_AUTH_FAILED if the tag does not match.
* \return #MBEDTLS_ERR_GCM_BAD_INPUT if the lengths or pointers are
* not valid or a cipher-specific error code if the decryption
* failed.
*/
int mbedtls_gcm_auth_decrypt( mbedtls_gcm_context *ctx,
size_t length,
const unsigned char *iv,
size_t iv_len,
const unsigned char *add,
size_t add_len,
const unsigned char *tag,
size_t tag_len,
const unsigned char *input,
unsigned char *output );
/**
* \brief This function starts a GCM encryption or decryption
* operation.
*
* \param ctx The GCM context. This must be initialized.
* \param mode The operation to perform: #MBEDTLS_GCM_ENCRYPT or
* #MBEDTLS_GCM_DECRYPT.
* \param iv The initialization vector. This must be a readable buffer of
* at least \p iv_len Bytes.
* \param iv_len The length of the IV.
*
* \return \c 0 on success.
*/
int mbedtls_gcm_starts( mbedtls_gcm_context *ctx,
int mode,
const unsigned char *iv,
size_t iv_len );
/**
* \brief This function feeds an input buffer as associated data
* (authenticated but not encrypted data) in a GCM
* encryption or decryption operation.
*
* Call this function after mbedtls_gcm_starts() to pass
* the associated data. If the associated data is empty,
* you do not need to call this function. You may not
* call this function after calling mbedtls_cipher_update().
*
* \param ctx The GCM context. This must have been started with
* mbedtls_gcm_starts() and must not have yet received
* any input with mbedtls_gcm_update().
* \param add The buffer holding the additional data, or \c NULL
* if \p add_len is \c 0.
* \param add_len The length of the additional data. If \c 0,
* \p add may be \c NULL.
*
* \return \c 0 on success.
*/
int mbedtls_gcm_update_ad( mbedtls_gcm_context *ctx,
const unsigned char *add,
size_t add_len );
/**
* \brief This function feeds an input buffer into an ongoing GCM
* encryption or decryption operation.
*
* You may call this function zero, one or more times
* to pass successive parts of the input: the plaintext to
* encrypt, or the ciphertext (not including the tag) to
* decrypt. After the last part of the input, call
* mbedtls_gcm_finish().
*
* This function may produce output in one of the following
* ways:
* - Immediate output: the output length is always equal
* to the input length.
* - Buffered output: the output consists of a whole number
* of 16-byte blocks. If the total input length so far
* (not including associated data) is 16 \* *B* + *A*
* with *A* < 16 then the total output length is 16 \* *B*.
*
* In particular:
* - It is always correct to call this function with
* \p output_size >= \p input_length + 15.
* - If \p input_length is a multiple of 16 for all the calls
* to this function during an operation, then it is
* correct to use \p output_size = \p input_length.
*
* \note For decryption, the output buffer cannot be the same as
* input buffer. If the buffers overlap, the output buffer
* must trail at least 8 Bytes behind the input buffer.
*
* \param ctx The GCM context. This must be initialized.
* \param input The buffer holding the input data. If \p input_length
* is greater than zero, this must be a readable buffer
* of at least \p input_length bytes.
* \param input_length The length of the input data in bytes.
* \param output The buffer for the output data. If \p output_size
* is greater than zero, this must be a writable buffer of
* of at least \p output_size bytes.
* \param output_size The size of the output buffer in bytes.
* See the function description regarding the output size.
* \param output_length On success, \p *output_length contains the actual
* length of the output written in \p output.
* On failure, the content of \p *output_length is
* unspecified.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_GCM_BAD_INPUT on failure:
* total input length too long,
* unsupported input/output buffer overlap detected,
* or \p output_size too small.
*/
int mbedtls_gcm_update( mbedtls_gcm_context *ctx,
const unsigned char *input, size_t input_length,
unsigned char *output, size_t output_size,
size_t *output_length );
/**
* \brief This function finishes the GCM operation and generates
* the authentication tag.
*
* It wraps up the GCM stream, and generates the
* tag. The tag can have a maximum length of 16 Bytes.
*
* \param ctx The GCM context. This must be initialized.
* \param tag The buffer for holding the tag. This must be a writable
* buffer of at least \p tag_len Bytes.
* \param tag_len The length of the tag to generate. This must be at least
* four.
* \param output The buffer for the final output.
* If \p output_size is nonzero, this must be a writable
* buffer of at least \p output_size bytes.
* \param output_size The size of the \p output buffer in bytes.
* This must be large enough for the output that
* mbedtls_gcm_update() has not produced. In particular:
* - If mbedtls_gcm_update() produces immediate output,
* or if the total input size is a multiple of \c 16,
* then mbedtls_gcm_finish() never produces any output,
* so \p output_size can be \c 0.
* - \p output_size never needs to be more than \c 15.
* \param output_length On success, \p *output_length contains the actual
* length of the output written in \p output.
* On failure, the content of \p *output_length is
* unspecified.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_GCM_BAD_INPUT on failure:
* invalid value of \p tag_len,
* or \p output_size too small.
*/
int mbedtls_gcm_finish( mbedtls_gcm_context *ctx,
unsigned char *output, size_t output_size,
size_t *output_length,
unsigned char *tag, size_t tag_len );
/**
* \brief This function clears a GCM context and the underlying
* cipher sub-context.
*
* \param ctx The GCM context to clear. If this is \c NULL, the call has
* no effect. Otherwise, this must be initialized.
*/
void mbedtls_gcm_free( mbedtls_gcm_context *ctx );
#if defined(MBEDTLS_SELF_TEST)
/**
* \brief The GCM checkup routine.
*
* \return \c 0 on success.
* \return \c 1 on failure.
*/
int mbedtls_gcm_self_test( int verbose );
#endif /* MBEDTLS_SELF_TEST */
#ifdef __cplusplus
}
#endif
#endif /* gcm.h */