tests/scripts/basic-build-test.sh - third_party/github/ARMmbed/mbedtls - Git at Google

 #!/bin/sh

 # basic-build-tests.sh
 #
 # Copyright The Mbed TLS Contributors
 # SPDX-License-Identifier: Apache-2.0
 #
 # Licensed under the Apache License, Version 2.0 (the "License"); you may
 # not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 # http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 # WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
 #
 # Purpose
 #
 # Executes the basic test suites, captures the results, and generates a simple
 # test report and code coverage report.
 #
 # The tests include:
 #   * Unit tests                - executed using tests/scripts/run-test-suite.pl
 #   * Self-tests                - executed using the test suites above
 #   * System tests              - executed using tests/ssl-opt.sh
 #   * Interoperability tests    - executed using tests/compat.sh
 #
 # The tests focus on functionality and do not consider performance.
 #
 # Note the tests self-adapt due to configurations in include/mbedtls/config.h
 # which can lead to some tests being skipped, and can cause the number of
 # available tests to fluctuate.
 #
 # This script has been written to be generic and should work on any shell.
 #
 # Usage: basic-build-tests.sh
 #

 # Abort on errors (and uninitiliased variables)
 set -eu

 if [ -d library -a -d include -a -d tests ]; then :; else
     echo "Must be run from mbed TLS root" >&2
     exit 1
 fi

 : ${OPENSSL:="openssl"}
 : ${OPENSSL_LEGACY:="$OPENSSL"}
 : ${GNUTLS_CLI:="gnutls-cli"}
 : ${GNUTLS_SERV:="gnutls-serv"}
 : ${GNUTLS_LEGACY_CLI:="$GNUTLS_CLI"}
 : ${GNUTLS_LEGACY_SERV:="$GNUTLS_SERV"}

 # Used to make ssl-opt.sh deterministic.
 #
 # See also RELEASE_SEED in all.sh. Debugging is easier if both values are kept
 # in sync. If you change the value here because it breaks some tests, you'll
 # definitely want to change it in all.sh as well.
 : ${SEED:=1}
 export SEED

 # To avoid setting OpenSSL and GnuTLS for each call to compat.sh and ssl-opt.sh
 # we just export the variables they require
 export OPENSSL_CMD="$OPENSSL"
 export GNUTLS_CLI="$GNUTLS_CLI"
 export GNUTLS_SERV="$GNUTLS_SERV"

 CONFIG_H='include/mbedtls/config.h'
 CONFIG_BAK="$CONFIG_H.bak"

 # Step 0 - print build environment info
 OPENSSL="$OPENSSL"                           \
     OPENSSL_LEGACY="$OPENSSL_LEGACY"         \
     GNUTLS_CLI="$GNUTLS_CLI"                 \
     GNUTLS_SERV="$GNUTLS_SERV"               \
     GNUTLS_LEGACY_CLI="$GNUTLS_LEGACY_CLI"   \
     GNUTLS_LEGACY_SERV="$GNUTLS_LEGACY_SERV" \
     scripts/output_env.sh
 echo

 # Step 1 - Make and instrumented build for code coverage
 export CFLAGS=' --coverage -g3 -O0 '
 export LDFLAGS=' --coverage'
 make clean
 cp "$CONFIG_H" "$CONFIG_BAK"
 scripts/config.py full
 make -j


 # Step 2 - Execute the tests
 TEST_OUTPUT=out_${PPID}
 cd tests
 if [ ! -f "seedfile" ]; then
     dd if=/dev/urandom of="seedfile" bs=64 count=1
 fi
 echo

 # Step 2a - Unit Tests (keep going even if some tests fail)
 echo '################ Unit tests ################'
 perl scripts/run-test-suites.pl -v 2 |tee unit-test-$TEST_OUTPUT
 echo '^^^^^^^^^^^^^^^^ Unit tests ^^^^^^^^^^^^^^^^'
 echo

 # Step 2b - System Tests (keep going even if some tests fail)
 echo
 echo '################ ssl-opt.sh ################'
 sh ssl-opt.sh |tee sys-test-$TEST_OUTPUT
 echo '^^^^^^^^^^^^^^^^ ssl-opt.sh ^^^^^^^^^^^^^^^^'
 echo

 # Step 2c - Compatibility tests (keep going even if some tests fail)
 echo '################ compat.sh ################'
 {
     echo '#### compat.sh: Default versions'
     sh compat.sh -m 'tls1_2 dtls1_2'
     echo

     echo '#### compat.sh: legacy (null, DES, RC4)'
     OPENSSL_CMD="$OPENSSL_LEGACY" \
     GNUTLS_CLI="$GNUTLS_LEGACY_CLI" GNUTLS_SERV="$GNUTLS_LEGACY_SERV" \
     sh compat.sh -e '^$' -f 'NULL\|DES\|RC4\|ARCFOUR'
     echo

     echo '#### compat.sh: next (ARIA, ChaCha)'
     OPENSSL_CMD="$OPENSSL_NEXT" sh compat.sh -e '^$' -f 'ARIA\|CHACHA'
     echo
 } | tee compat-test-$TEST_OUTPUT
 echo '^^^^^^^^^^^^^^^^ compat.sh ^^^^^^^^^^^^^^^^'
 echo

 # Step 3 - Process the coverage report
 cd ..
 {
     make lcov
     echo SUCCESS
 } | tee tests/cov-$TEST_OUTPUT

 if [ "$(tail -n1 tests/cov-$TEST_OUTPUT)" != "SUCCESS" ]; then
     echo >&2 "Fatal: 'make lcov' failed"
     exit 2
 fi


 # Step 4 - Summarise the test report
 echo
 echo "========================================================================="
 echo "Test Report Summary"
 echo

 cd tests

 # Step 4a - Unit tests
 echo "Unit tests - tests/scripts/run-test-suites.pl"

 PASSED_TESTS=$(tail -n6 unit-test-$TEST_OUTPUT|sed -n -e 's/test cases passed :[\t]*\([0-9]*\)/\1/p'| tr -d ' ')
 SKIPPED_TESTS=$(tail -n6 unit-test-$TEST_OUTPUT|sed -n -e 's/skipped :[ \t]*\([0-9]*\)/\1/p'| tr -d ' ')
 TOTAL_SUITES=$(tail -n6 unit-test-$TEST_OUTPUT|sed -n -e 's/.* (\([0-9]*\) .*, [0-9]* tests run)/\1/p'| tr -d ' ')
 FAILED_TESTS=$(tail -n6 unit-test-$TEST_OUTPUT|sed -n -e 's/failed :[\t]*\([0-9]*\)/\1/p' |tr -d ' ')

 echo "No test suites     : $TOTAL_SUITES"
 echo "Passed             : $PASSED_TESTS"
 echo "Failed             : $FAILED_TESTS"
 echo "Skipped            : $SKIPPED_TESTS"
 echo "Total exec'd tests : $(($PASSED_TESTS + $FAILED_TESTS))"
 echo "Total avail tests  : $(($PASSED_TESTS + $FAILED_TESTS + $SKIPPED_TESTS))"
 echo

 TOTAL_PASS=$PASSED_TESTS
 TOTAL_FAIL=$FAILED_TESTS
 TOTAL_SKIP=$SKIPPED_TESTS
 TOTAL_AVAIL=$(($PASSED_TESTS + $FAILED_TESTS + $SKIPPED_TESTS))
 TOTAL_EXED=$(($PASSED_TESTS + $FAILED_TESTS))

 # Step 4b - TLS Options tests
 echo "TLS Options tests - tests/ssl-opt.sh"

 PASSED_TESTS=$(tail -n5 sys-test-$TEST_OUTPUT|sed -n -e 's/.* (\([0-9]*\) \/ [0-9]* tests ([0-9]* skipped))$/\1/p')
 SKIPPED_TESTS=$(tail -n5 sys-test-$TEST_OUTPUT|sed -n -e 's/.* ([0-9]* \/ [0-9]* tests (\([0-9]*\) skipped))$/\1/p')
 TOTAL_TESTS=$(tail -n5 sys-test-$TEST_OUTPUT|sed -n -e 's/.* ([0-9]* \/ \([0-9]*\) tests ([0-9]* skipped))$/\1/p')
 FAILED_TESTS=$(($TOTAL_TESTS - $PASSED_TESTS))

 echo "Passed             : $PASSED_TESTS"
 echo "Failed             : $FAILED_TESTS"
 echo "Skipped            : $SKIPPED_TESTS"
 echo "Total exec'd tests : $TOTAL_TESTS"
 echo "Total avail tests  : $(($TOTAL_TESTS + $SKIPPED_TESTS))"
 echo

 TOTAL_PASS=$(($TOTAL_PASS+$PASSED_TESTS))
 TOTAL_FAIL=$(($TOTAL_FAIL+$FAILED_TESTS))
 TOTAL_SKIP=$(($TOTAL_SKIP+$SKIPPED_TESTS))
 TOTAL_AVAIL=$(($TOTAL_AVAIL + $TOTAL_TESTS + $SKIPPED_TESTS))
 TOTAL_EXED=$(($TOTAL_EXED + $TOTAL_TESTS))


 # Step 4c - System Compatibility tests
 echo "System/Compatibility tests - tests/compat.sh"

 PASSED_TESTS=$(cat compat-test-$TEST_OUTPUT | sed -n -e 's/.* (\([0-9]*\) \/ [0-9]* tests ([0-9]* skipped))$/\1/p' | awk 'BEGIN{ s = 0 } { s += $1 } END{ print s }')
 SKIPPED_TESTS=$(cat compat-test-$TEST_OUTPUT | sed -n -e 's/.* ([0-9]* \/ [0-9]* tests (\([0-9]*\) skipped))$/\1/p' | awk 'BEGIN{ s = 0 } { s += $1 } END{ print s }')
 EXED_TESTS=$(cat compat-test-$TEST_OUTPUT | sed -n -e 's/.* ([0-9]* \/ \([0-9]*\) tests ([0-9]* skipped))$/\1/p' | awk 'BEGIN{ s = 0 } { s += $1 } END{ print s }')
 FAILED_TESTS=$(($EXED_TESTS - $PASSED_TESTS))

 echo "Passed             : $PASSED_TESTS"
 echo "Failed             : $FAILED_TESTS"
 echo "Skipped            : $SKIPPED_TESTS"
 echo "Total exec'd tests : $EXED_TESTS"
 echo "Total avail tests  : $(($EXED_TESTS + $SKIPPED_TESTS))"
 echo

 TOTAL_PASS=$(($TOTAL_PASS+$PASSED_TESTS))
 TOTAL_FAIL=$(($TOTAL_FAIL+$FAILED_TESTS))
 TOTAL_SKIP=$(($TOTAL_SKIP+$SKIPPED_TESTS))
 TOTAL_AVAIL=$(($TOTAL_AVAIL + $EXED_TESTS + $SKIPPED_TESTS))
 TOTAL_EXED=$(($TOTAL_EXED + $EXED_TESTS))


 # Step 4d - Grand totals
 echo "-------------------------------------------------------------------------"
 echo "Total tests"

 echo "Total Passed       : $TOTAL_PASS"
 echo "Total Failed       : $TOTAL_FAIL"
 echo "Total Skipped      : $TOTAL_SKIP"
 echo "Total exec'd tests : $TOTAL_EXED"
 echo "Total avail tests  : $TOTAL_AVAIL"
 echo


 # Step 4e - Coverage
 echo "Coverage"

 LINES_TESTED=$(tail -n4 cov-$TEST_OUTPUT|sed -n -e 's/  lines......: [0-9]*.[0-9]% (\([0-9]*\) of [0-9]* lines)/\1/p')
 LINES_TOTAL=$(tail -n4 cov-$TEST_OUTPUT|sed -n -e 's/  lines......: [0-9]*.[0-9]% ([0-9]* of \([0-9]*\) lines)/\1/p')
 FUNCS_TESTED=$(tail -n4 cov-$TEST_OUTPUT|sed -n -e 's/  functions..: [0-9]*.[0-9]% (\([0-9]*\) of [0-9]* functions)$/\1/p')
 FUNCS_TOTAL=$(tail -n4 cov-$TEST_OUTPUT|sed -n -e 's/  functions..: [0-9]*.[0-9]% ([0-9]* of \([0-9]*\) functions)$/\1/p')
 BRANCHES_TESTED=$(tail -n4 cov-$TEST_OUTPUT|sed -n -e 's/  branches...: [0-9]*.[0-9]% (\([0-9]*\) of [0-9]* branches)$/\1/p')
 BRANCHES_TOTAL=$(tail -n4 cov-$TEST_OUTPUT|sed -n -e 's/  branches...: [0-9]*.[0-9]% ([0-9]* of \([0-9]*\) branches)$/\1/p')

 LINES_PERCENT=$((1000*$LINES_TESTED/$LINES_TOTAL))
 LINES_PERCENT="$(($LINES_PERCENT/10)).$(($LINES_PERCENT-($LINES_PERCENT/10)*10))"

 FUNCS_PERCENT=$((1000*$FUNCS_TESTED/$FUNCS_TOTAL))
 FUNCS_PERCENT="$(($FUNCS_PERCENT/10)).$(($FUNCS_PERCENT-($FUNCS_PERCENT/10)*10))"

 BRANCHES_PERCENT=$((1000*$BRANCHES_TESTED/$BRANCHES_TOTAL))
 BRANCHES_PERCENT="$(($BRANCHES_PERCENT/10)).$(($BRANCHES_PERCENT-($BRANCHES_PERCENT/10)*10))"

 echo "Lines Tested       : $LINES_TESTED of $LINES_TOTAL $LINES_PERCENT%"
 echo "Functions Tested   : $FUNCS_TESTED of $FUNCS_TOTAL $FUNCS_PERCENT%"
 echo "Branches Tested    : $BRANCHES_TESTED of $BRANCHES_TOTAL $BRANCHES_PERCENT%"
 echo

 rm unit-test-$TEST_OUTPUT
 rm sys-test-$TEST_OUTPUT
 rm compat-test-$TEST_OUTPUT
 rm cov-$TEST_OUTPUT

 cd ..

 make clean

 if [ -f "$CONFIG_BAK" ]; then
     mv "$CONFIG_BAK" "$CONFIG_H"
 fi

 if [ $TOTAL_FAIL -ne 0 ]; then
     exit 1
 fi
	#!/bin/sh

	# basic-build-tests.sh
	#
	# Copyright The Mbed TLS Contributors
	# SPDX-License-Identifier: Apache-2.0
	#
	# Licensed under the Apache License, Version 2.0 (the "License"); you may
	# not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
	# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	#
	# Purpose
	#
	# Executes the basic test suites, captures the results, and generates a simple
	# test report and code coverage report.
	#
	# The tests include:
	# * Unit tests - executed using tests/scripts/run-test-suite.pl
	# * Self-tests - executed using the test suites above
	# * System tests - executed using tests/ssl-opt.sh
	# * Interoperability tests - executed using tests/compat.sh
	#
	# The tests focus on functionality and do not consider performance.
	#
	# Note the tests self-adapt due to configurations in include/mbedtls/config.h
	# which can lead to some tests being skipped, and can cause the number of
	# available tests to fluctuate.
	#
	# This script has been written to be generic and should work on any shell.
	#
	# Usage: basic-build-tests.sh
	#

	# Abort on errors (and uninitiliased variables)
	set -eu

	if [ -d library -a -d include -a -d tests ]; then :; else
	echo "Must be run from mbed TLS root" >&2
	exit 1
	fi

	: ${OPENSSL:="openssl"}
	: ${OPENSSL_LEGACY:="$OPENSSL"}
	: ${GNUTLS_CLI:="gnutls-cli"}
	: ${GNUTLS_SERV:="gnutls-serv"}
	: ${GNUTLS_LEGACY_CLI:="$GNUTLS_CLI"}
	: ${GNUTLS_LEGACY_SERV:="$GNUTLS_SERV"}

	# Used to make ssl-opt.sh deterministic.
	#
	# See also RELEASE_SEED in all.sh. Debugging is easier if both values are kept
	# in sync. If you change the value here because it breaks some tests, you'll
	# definitely want to change it in all.sh as well.
	: ${SEED:=1}
	export SEED

	# To avoid setting OpenSSL and GnuTLS for each call to compat.sh and ssl-opt.sh
	# we just export the variables they require
	export OPENSSL_CMD="$OPENSSL"
	export GNUTLS_CLI="$GNUTLS_CLI"
	export GNUTLS_SERV="$GNUTLS_SERV"

	CONFIG_H='include/mbedtls/config.h'
	CONFIG_BAK="$CONFIG_H.bak"

	# Step 0 - print build environment info
	OPENSSL="$OPENSSL" \
	OPENSSL_LEGACY="$OPENSSL_LEGACY" \
	GNUTLS_CLI="$GNUTLS_CLI" \
	GNUTLS_SERV="$GNUTLS_SERV" \
	GNUTLS_LEGACY_CLI="$GNUTLS_LEGACY_CLI" \
	GNUTLS_LEGACY_SERV="$GNUTLS_LEGACY_SERV" \
	scripts/output_env.sh
	echo

	# Step 1 - Make and instrumented build for code coverage
	export CFLAGS=' --coverage -g3 -O0 '
	export LDFLAGS=' --coverage'
	make clean
	cp "$CONFIG_H" "$CONFIG_BAK"
	scripts/config.py full
	make -j


	# Step 2 - Execute the tests
	TEST_OUTPUT=out_${PPID}
	cd tests
	if [ ! -f "seedfile" ]; then
	dd if=/dev/urandom of="seedfile" bs=64 count=1
	fi
	echo

	# Step 2a - Unit Tests (keep going even if some tests fail)
	echo '################ Unit tests ################'
	perl scripts/run-test-suites.pl -v 2 \|tee unit-test-$TEST_OUTPUT
	echo '^^^^^^^^^^^^^^^^ Unit tests ^^^^^^^^^^^^^^^^'
	echo

	# Step 2b - System Tests (keep going even if some tests fail)
	echo
	echo '################ ssl-opt.sh ################'
	sh ssl-opt.sh \|tee sys-test-$TEST_OUTPUT
	echo '^^^^^^^^^^^^^^^^ ssl-opt.sh ^^^^^^^^^^^^^^^^'
	echo

	# Step 2c - Compatibility tests (keep going even if some tests fail)
	echo '################ compat.sh ################'
	{
	echo '#### compat.sh: Default versions'
	sh compat.sh -m 'tls1_2 dtls1_2'
	echo

	echo '#### compat.sh: legacy (null, DES, RC4)'
	OPENSSL_CMD="$OPENSSL_LEGACY" \
	GNUTLS_CLI="$GNUTLS_LEGACY_CLI" GNUTLS_SERV="$GNUTLS_LEGACY_SERV" \
	sh compat.sh -e '^$' -f 'NULL\\|DES\\|RC4\\|ARCFOUR'
	echo

	echo '#### compat.sh: next (ARIA, ChaCha)'
	OPENSSL_CMD="$OPENSSL_NEXT" sh compat.sh -e '^$' -f 'ARIA\\|CHACHA'
	echo
	} \| tee compat-test-$TEST_OUTPUT
	echo '^^^^^^^^^^^^^^^^ compat.sh ^^^^^^^^^^^^^^^^'
	echo

	# Step 3 - Process the coverage report
	cd ..
	{
	make lcov
	echo SUCCESS
	} \| tee tests/cov-$TEST_OUTPUT

	if [ "$(tail -n1 tests/cov-$TEST_OUTPUT)" != "SUCCESS" ]; then
	echo >&2 "Fatal: 'make lcov' failed"
	exit 2
	fi


	# Step 4 - Summarise the test report
	echo
	echo "========================================================================="
	echo "Test Report Summary"
	echo

	cd tests

	# Step 4a - Unit tests
	echo "Unit tests - tests/scripts/run-test-suites.pl"

	PASSED_TESTS=$(tail -n6 unit-test-$TEST_OUTPUT\|sed -n -e 's/test cases passed :[\t]\([0-9]\)/\1/p'\| tr -d ' ')
	SKIPPED_TESTS=$(tail -n6 unit-test-$TEST_OUTPUT\|sed -n -e 's/skipped :[ \t]\([0-9]\)/\1/p'\| tr -d ' ')
	TOTAL_SUITES=$(tail -n6 unit-test-$TEST_OUTPUT\|sed -n -e 's/.* (\([0-9]\) ., [0-9]* tests run)/\1/p'\| tr -d ' ')
	FAILED_TESTS=$(tail -n6 unit-test-$TEST_OUTPUT\|sed -n -e 's/failed :[\t]\([0-9]\)/\1/p' \|tr -d ' ')

	echo "No test suites : $TOTAL_SUITES"
	echo "Passed : $PASSED_TESTS"
	echo "Failed : $FAILED_TESTS"
	echo "Skipped : $SKIPPED_TESTS"
	echo "Total exec'd tests : $(($PASSED_TESTS + $FAILED_TESTS))"
	echo "Total avail tests : $(($PASSED_TESTS + $FAILED_TESTS + $SKIPPED_TESTS))"
	echo

	TOTAL_PASS=$PASSED_TESTS
	TOTAL_FAIL=$FAILED_TESTS
	TOTAL_SKIP=$SKIPPED_TESTS
	TOTAL_AVAIL=$(($PASSED_TESTS + $FAILED_TESTS + $SKIPPED_TESTS))
	TOTAL_EXED=$(($PASSED_TESTS + $FAILED_TESTS))

	# Step 4b - TLS Options tests
	echo "TLS Options tests - tests/ssl-opt.sh"

	PASSED_TESTS=$(tail -n5 sys-test-$TEST_OUTPUT\|sed -n -e 's/.* (\([0-9]\) \/ [0-9] tests ([0-9]* skipped))$/\1/p')
	SKIPPED_TESTS=$(tail -n5 sys-test-$TEST_OUTPUT\|sed -n -e 's/.* ([0-9]* \/ [0-9]* tests (\([0-9]*\) skipped))$/\1/p')
	TOTAL_TESTS=$(tail -n5 sys-test-$TEST_OUTPUT\|sed -n -e 's/.* ([0-9]* \/ \([0-9]\) tests ([0-9] skipped))$/\1/p')
	FAILED_TESTS=$(($TOTAL_TESTS - $PASSED_TESTS))

	echo "Passed : $PASSED_TESTS"
	echo "Failed : $FAILED_TESTS"
	echo "Skipped : $SKIPPED_TESTS"
	echo "Total exec'd tests : $TOTAL_TESTS"
	echo "Total avail tests : $(($TOTAL_TESTS + $SKIPPED_TESTS))"
	echo

	TOTAL_PASS=$(($TOTAL_PASS+$PASSED_TESTS))
	TOTAL_FAIL=$(($TOTAL_FAIL+$FAILED_TESTS))
	TOTAL_SKIP=$(($TOTAL_SKIP+$SKIPPED_TESTS))
	TOTAL_AVAIL=$(($TOTAL_AVAIL + $TOTAL_TESTS + $SKIPPED_TESTS))
	TOTAL_EXED=$(($TOTAL_EXED + $TOTAL_TESTS))


	# Step 4c - System Compatibility tests
	echo "System/Compatibility tests - tests/compat.sh"

	PASSED_TESTS=$(cat compat-test-$TEST_OUTPUT \| sed -n -e 's/.* (\([0-9]\) \/ [0-9] tests ([0-9]* skipped))$/\1/p' \| awk 'BEGIN{ s = 0 } { s += $1 } END{ print s }')
	SKIPPED_TESTS=$(cat compat-test-$TEST_OUTPUT \| sed -n -e 's/.* ([0-9]* \/ [0-9]* tests (\([0-9]*\) skipped))$/\1/p' \| awk 'BEGIN{ s = 0 } { s += $1 } END{ print s }')
	EXED_TESTS=$(cat compat-test-$TEST_OUTPUT \| sed -n -e 's/.* ([0-9]* \/ \([0-9]\) tests ([0-9] skipped))$/\1/p' \| awk 'BEGIN{ s = 0 } { s += $1 } END{ print s }')
	FAILED_TESTS=$(($EXED_TESTS - $PASSED_TESTS))

	echo "Passed : $PASSED_TESTS"
	echo "Failed : $FAILED_TESTS"
	echo "Skipped : $SKIPPED_TESTS"
	echo "Total exec'd tests : $EXED_TESTS"
	echo "Total avail tests : $(($EXED_TESTS + $SKIPPED_TESTS))"
	echo

	TOTAL_PASS=$(($TOTAL_PASS+$PASSED_TESTS))
	TOTAL_FAIL=$(($TOTAL_FAIL+$FAILED_TESTS))
	TOTAL_SKIP=$(($TOTAL_SKIP+$SKIPPED_TESTS))
	TOTAL_AVAIL=$(($TOTAL_AVAIL + $EXED_TESTS + $SKIPPED_TESTS))
	TOTAL_EXED=$(($TOTAL_EXED + $EXED_TESTS))


	# Step 4d - Grand totals
	echo "-------------------------------------------------------------------------"
	echo "Total tests"

	echo "Total Passed : $TOTAL_PASS"
	echo "Total Failed : $TOTAL_FAIL"
	echo "Total Skipped : $TOTAL_SKIP"
	echo "Total exec'd tests : $TOTAL_EXED"
	echo "Total avail tests : $TOTAL_AVAIL"
	echo


	# Step 4e - Coverage
	echo "Coverage"

	LINES_TESTED=$(tail -n4 cov-$TEST_OUTPUT\|sed -n -e 's/ lines......: [0-9].[0-9]% (\([0-9]\) of [0-9]* lines)/\1/p')
	LINES_TOTAL=$(tail -n4 cov-$TEST_OUTPUT\|sed -n -e 's/ lines......: [0-9].[0-9]% ([0-9] of \([0-9]*\) lines)/\1/p')
	FUNCS_TESTED=$(tail -n4 cov-$TEST_OUTPUT\|sed -n -e 's/ functions..: [0-9].[0-9]% (\([0-9]\) of [0-9]* functions)$/\1/p')
	FUNCS_TOTAL=$(tail -n4 cov-$TEST_OUTPUT\|sed -n -e 's/ functions..: [0-9].[0-9]% ([0-9] of \([0-9]*\) functions)$/\1/p')
	BRANCHES_TESTED=$(tail -n4 cov-$TEST_OUTPUT\|sed -n -e 's/ branches...: [0-9].[0-9]% (\([0-9]\) of [0-9]* branches)$/\1/p')
	BRANCHES_TOTAL=$(tail -n4 cov-$TEST_OUTPUT\|sed -n -e 's/ branches...: [0-9].[0-9]% ([0-9] of \([0-9]*\) branches)$/\1/p')

	LINES_PERCENT=$((1000*$LINES_TESTED/$LINES_TOTAL))
	LINES_PERCENT="$(($LINES_PERCENT/10)).$(($LINES_PERCENT-($LINES_PERCENT/10)*10))"

	FUNCS_PERCENT=$((1000*$FUNCS_TESTED/$FUNCS_TOTAL))
	FUNCS_PERCENT="$(($FUNCS_PERCENT/10)).$(($FUNCS_PERCENT-($FUNCS_PERCENT/10)*10))"

	BRANCHES_PERCENT=$((1000*$BRANCHES_TESTED/$BRANCHES_TOTAL))
	BRANCHES_PERCENT="$(($BRANCHES_PERCENT/10)).$(($BRANCHES_PERCENT-($BRANCHES_PERCENT/10)*10))"

	echo "Lines Tested : $LINES_TESTED of $LINES_TOTAL $LINES_PERCENT%"
	echo "Functions Tested : $FUNCS_TESTED of $FUNCS_TOTAL $FUNCS_PERCENT%"
	echo "Branches Tested : $BRANCHES_TESTED of $BRANCHES_TOTAL $BRANCHES_PERCENT%"
	echo

	rm unit-test-$TEST_OUTPUT
	rm sys-test-$TEST_OUTPUT
	rm compat-test-$TEST_OUTPUT
	rm cov-$TEST_OUTPUT

	cd ..

	make clean

	if [ -f "$CONFIG_BAK" ]; then
	mv "$CONFIG_BAK" "$CONFIG_H"
	fi

	if [ $TOTAL_FAIL -ne 0 ]; then
	exit 1
	fi