include/mbedtls/gcm.h

/**
 * \file gcm.h
 *
 * \brief Galois/Counter mode for 128-bit block ciphers
 *
 *  Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
 *  SPDX-License-Identifier: Apache-2.0
 *
 *  Licensed under the Apache License, Version 2.0 (the "License"); you may
 *  not use this file except in compliance with the License.
 *  You may obtain a copy of the License at
 *
 *  http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 *
 *  This file is part of mbed TLS (https://tls.mbed.org)
 */
#ifndef MBEDTLS_GCM_H
#define MBEDTLS_GCM_H

#include "cipher.h"

#include <stdint.h>

#define MBEDTLS_GCM_ENCRYPT     1
#define MBEDTLS_GCM_DECRYPT     0

#define MBEDTLS_ERR_GCM_AUTH_FAILED                       -0x0012  /**< Authenticated decryption failed. */
#define MBEDTLS_ERR_GCM_BAD_INPUT                         -0x0014  /**< Bad input parameters to function. */

#ifdef __cplusplus
extern "C" {
#endif

/**
 * \brief          GCM context structure
 */
typedef struct {
    mbedtls_cipher_context_t cipher_ctx;/*!< cipher context used */
    uint64_t HL[16];            /*!< Precalculated HTable */
    uint64_t HH[16];            /*!< Precalculated HTable */
    uint64_t len;               /*!< Total data length */
    uint64_t add_len;           /*!< Total add length */
    unsigned char base_ectr[16];/*!< First ECTR for tag */
    unsigned char y[16];        /*!< Y working value */
    unsigned char buf[16];      /*!< buf working value */
    int mode;                   /*!< Encrypt or Decrypt */
}
mbedtls_gcm_context;

/**
 * \brief           Initialize GCM context (just makes references valid)
 *                  Makes the context ready for mbedtls_gcm_setkey() or
 *                  mbedtls_gcm_free().
 *
 * \param ctx       GCM context to initialize
 */
void mbedtls_gcm_init( mbedtls_gcm_context *ctx );

/**
 * \brief           GCM initialization (encryption)
 *
 * \param ctx       GCM context to be initialized
 * \param cipher    cipher to use (a 128-bit block cipher)
 * \param key       encryption key
 * \param keybits   must be 128, 192 or 256
 *
 * \return          0 if successful, or a cipher specific error code
 */
int mbedtls_gcm_setkey( mbedtls_gcm_context *ctx,
                        mbedtls_cipher_id_t cipher,
                        const unsigned char *key,
                        unsigned int keybits );

/**
 * \brief           GCM buffer encryption/decryption using a block cipher
 *
 * \note On encryption, the output buffer can be the same as the input buffer.
 *       On decryption, the output buffer cannot be the same as input buffer.
 *       If buffers overlap, the output buffer must trail at least 8 bytes
 *       behind the input buffer.
 *
 * \param ctx       GCM context
 * \param mode      MBEDTLS_GCM_ENCRYPT or MBEDTLS_GCM_DECRYPT
 * \param length    length of the input data
 * \param iv        initialization vector
 * \param iv_len    length of IV
 * \param add       additional data
 * \param add_len   length of additional data
 * \param input     buffer holding the input data
 * \param output    buffer for holding the output data
 * \param tag_len   length of the tag to generate
 * \param tag       buffer for holding the tag
 *
 * \return         0 if successful
 */
int mbedtls_gcm_crypt_and_tag( mbedtls_gcm_context *ctx,
                       int mode,
                       size_t length,
                       const unsigned char *iv,
                       size_t iv_len,
                       const unsigned char *add,
                       size_t add_len,
                       const unsigned char *input,
                       unsigned char *output,
                       size_t tag_len,
                       unsigned char *tag );

/**
 * \brief           GCM buffer authenticated decryption using a block cipher
 *
 * \note On decryption, the output buffer cannot be the same as input buffer.
 *       If buffers overlap, the output buffer must trail at least 8 bytes
 *       behind the input buffer.
 *
 * \param ctx       GCM context
 * \param length    length of the input data
 * \param iv        initialization vector
 * \param iv_len    length of IV
 * \param add       additional data
 * \param add_len   length of additional data
 * \param tag       buffer holding the tag
 * \param tag_len   length of the tag
 * \param input     buffer holding the input data
 * \param output    buffer for holding the output data
 *
 * \return         0 if successful and authenticated,
 *                 MBEDTLS_ERR_GCM_AUTH_FAILED if tag does not match
 */
int mbedtls_gcm_auth_decrypt( mbedtls_gcm_context *ctx,
                      size_t length,
                      const unsigned char *iv,
                      size_t iv_len,
                      const unsigned char *add,
                      size_t add_len,
                      const unsigned char *tag,
                      size_t tag_len,
                      const unsigned char *input,
                      unsigned char *output );

/**
 * \brief           Generic GCM stream start function
 *
 * \param ctx       GCM context
 * \param mode      MBEDTLS_GCM_ENCRYPT or MBEDTLS_GCM_DECRYPT
 * \param iv        initialization vector
 * \param iv_len    length of IV
 * \param add       additional data (or NULL if length is 0)
 * \param add_len   length of additional data
 *
 * \return         0 if successful
 */
int mbedtls_gcm_starts( mbedtls_gcm_context *ctx,
                int mode,
                const unsigned char *iv,
                size_t iv_len,
                const unsigned char *add,
                size_t add_len );

/**
 * \brief           Generic GCM update function. Encrypts/decrypts using the
 *                  given GCM context. Expects input to be a multiple of 16
 *                  bytes! Only the last call before mbedtls_gcm_finish() can be less
 *                  than 16 bytes!
 *
 * \note On decryption, the output buffer cannot be the same as input buffer.
 *       If buffers overlap, the output buffer must trail at least 8 bytes
 *       behind the input buffer.
 *
 * \param ctx       GCM context
 * \param length    length of the input data
 * \param input     buffer holding the input data
 * \param output    buffer for holding the output data
 *
 * \return         0 if successful or MBEDTLS_ERR_GCM_BAD_INPUT
 */
int mbedtls_gcm_update( mbedtls_gcm_context *ctx,
                size_t length,
                const unsigned char *input,
                unsigned char *output );

/**
 * \brief           Generic GCM finalisation function. Wraps up the GCM stream
 *                  and generates the tag. The tag can have a maximum length of
 *                  16 bytes.
 *
 * \param ctx       GCM context
 * \param tag       buffer for holding the tag (may be NULL if tag_len is 0)
 * \param tag_len   length of the tag to generate
 *
 * \return          0 if successful or MBEDTLS_ERR_GCM_BAD_INPUT
 */
int mbedtls_gcm_finish( mbedtls_gcm_context *ctx,
                unsigned char *tag,
                size_t tag_len );

/**
 * \brief           Free a GCM context and underlying cipher sub-context
 *
 * \param ctx       GCM context to free
 */
void mbedtls_gcm_free( mbedtls_gcm_context *ctx );

/**
 * \brief          Checkup routine
 *
 * \return         0 if successful, or 1 if the test failed
 */
int mbedtls_gcm_self_test( int verbose );

#ifdef __cplusplus
}
#endif

#endif /* gcm.h */