| /* |
| * Certificate reading application |
| * |
| * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved |
| * SPDX-License-Identifier: Apache-2.0 |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); you may |
| * not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| * This file is part of mbed TLS (https://tls.mbed.org) |
| */ |
| |
| #if !defined(MBEDTLS_CONFIG_FILE) |
| #include "mbedtls/config.h" |
| #else |
| #include MBEDTLS_CONFIG_FILE |
| #endif |
| |
| #if defined(MBEDTLS_PLATFORM_C) |
| #include "mbedtls/platform.h" |
| #else |
| #include <stdio.h> |
| #include <stdlib.h> |
| #define mbedtls_time time |
| #define mbedtls_time_t time_t |
| #define mbedtls_fprintf fprintf |
| #define mbedtls_printf printf |
| #define mbedtls_exit exit |
| #define MBEDTLS_EXIT_SUCCESS EXIT_SUCCESS |
| #define MBEDTLS_EXIT_FAILURE EXIT_FAILURE |
| #endif /* MBEDTLS_PLATFORM_C */ |
| |
| #if !defined(MBEDTLS_BIGNUM_C) || !defined(MBEDTLS_ENTROPY_C) || \ |
| !defined(MBEDTLS_SSL_TLS_C) || !defined(MBEDTLS_SSL_CLI_C) || \ |
| !defined(MBEDTLS_NET_C) || !defined(MBEDTLS_RSA_C) || \ |
| !defined(MBEDTLS_X509_CRT_PARSE_C) || !defined(MBEDTLS_FS_IO) || \ |
| !defined(MBEDTLS_CTR_DRBG_C) |
| int main( void ) |
| { |
| mbedtls_printf("MBEDTLS_BIGNUM_C and/or MBEDTLS_ENTROPY_C and/or " |
| "MBEDTLS_SSL_TLS_C and/or MBEDTLS_SSL_CLI_C and/or " |
| "MBEDTLS_NET_C and/or MBEDTLS_RSA_C and/or " |
| "MBEDTLS_X509_CRT_PARSE_C and/or MBEDTLS_FS_IO and/or " |
| "MBEDTLS_CTR_DRBG_C not defined.\n"); |
| mbedtls_exit( 0 ); |
| } |
| #else |
| |
| #include "mbedtls/entropy.h" |
| #include "mbedtls/ctr_drbg.h" |
| #include "mbedtls/net_sockets.h" |
| #include "mbedtls/ssl.h" |
| #include "mbedtls/x509.h" |
| #include "mbedtls/debug.h" |
| |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| |
| #define MODE_NONE 0 |
| #define MODE_FILE 1 |
| #define MODE_SSL 2 |
| |
| #define DFL_MODE MODE_NONE |
| #define DFL_FILENAME "cert.crt" |
| #define DFL_CA_FILE "" |
| #define DFL_CRL_FILE "" |
| #define DFL_CA_PATH "" |
| #define DFL_SERVER_NAME "localhost" |
| #define DFL_SERVER_PORT "4433" |
| #define DFL_DEBUG_LEVEL 0 |
| #define DFL_PERMISSIVE 0 |
| |
| #define USAGE_IO \ |
| " ca_file=%%s The single file containing the top-level CA(s) you fully trust\n" \ |
| " default: \"\" (none)\n" \ |
| " crl_file=%%s The single CRL file you want to use\n" \ |
| " default: \"\" (none)\n" \ |
| " ca_path=%%s The path containing the top-level CA(s) you fully trust\n" \ |
| " default: \"\" (none) (overrides ca_file)\n" |
| |
| #define USAGE \ |
| "\n usage: cert_app param=<>...\n" \ |
| "\n acceptable parameters:\n" \ |
| " mode=file|ssl default: none\n" \ |
| " filename=%%s default: cert.crt\n" \ |
| USAGE_IO \ |
| " server_name=%%s default: localhost\n" \ |
| " server_port=%%d default: 4433\n" \ |
| " debug_level=%%d default: 0 (disabled)\n" \ |
| " permissive=%%d default: 0 (disabled)\n" \ |
| "\n" |
| |
| |
| /* |
| * global options |
| */ |
| struct options |
| { |
| int mode; /* the mode to run the application in */ |
| const char *filename; /* filename of the certificate file */ |
| const char *ca_file; /* the file with the CA certificate(s) */ |
| const char *crl_file; /* the file with the CRL to use */ |
| const char *ca_path; /* the path with the CA certificate(s) reside */ |
| const char *server_name; /* hostname of the server (client only) */ |
| const char *server_port; /* port on which the ssl service runs */ |
| int debug_level; /* level of debugging */ |
| int permissive; /* permissive parsing */ |
| } opt; |
| |
| static void my_debug( void *ctx, int level, |
| const char *file, int line, |
| const char *str ) |
| { |
| ((void) level); |
| |
| mbedtls_fprintf( (FILE *) ctx, "%s:%04d: %s", file, line, str ); |
| fflush( (FILE *) ctx ); |
| } |
| |
| static int my_verify( void *data, mbedtls_x509_crt *crt, int depth, uint32_t *flags ) |
| { |
| char buf[1024]; |
| ((void) data); |
| |
| mbedtls_printf( "\nVerify requested for (Depth %d):\n", depth ); |
| mbedtls_x509_crt_info( buf, sizeof( buf ) - 1, "", crt ); |
| mbedtls_printf( "%s", buf ); |
| |
| if ( ( *flags ) == 0 ) |
| mbedtls_printf( " This certificate has no flags\n" ); |
| else |
| { |
| mbedtls_x509_crt_verify_info( buf, sizeof( buf ), " ! ", *flags ); |
| mbedtls_printf( "%s\n", buf ); |
| } |
| |
| return( 0 ); |
| } |
| |
| int main( int argc, char *argv[] ) |
| { |
| int ret = 1; |
| int exit_code = MBEDTLS_EXIT_FAILURE; |
| mbedtls_net_context server_fd; |
| unsigned char buf[1024]; |
| mbedtls_entropy_context entropy; |
| mbedtls_ctr_drbg_context ctr_drbg; |
| mbedtls_ssl_context ssl; |
| mbedtls_ssl_config conf; |
| mbedtls_x509_crt cacert; |
| mbedtls_x509_crl cacrl; |
| int i, j; |
| uint32_t flags; |
| int verify = 0; |
| char *p, *q; |
| const char *pers = "cert_app"; |
| |
| /* |
| * Set to sane values |
| */ |
| mbedtls_net_init( &server_fd ); |
| mbedtls_ctr_drbg_init( &ctr_drbg ); |
| mbedtls_ssl_init( &ssl ); |
| mbedtls_ssl_config_init( &conf ); |
| mbedtls_x509_crt_init( &cacert ); |
| #if defined(MBEDTLS_X509_CRL_PARSE_C) |
| mbedtls_x509_crl_init( &cacrl ); |
| #else |
| /* Zeroize structure as CRL parsing is not supported and we have to pass |
| it to the verify function */ |
| memset( &cacrl, 0, sizeof(mbedtls_x509_crl) ); |
| #endif |
| |
| if( argc == 0 ) |
| { |
| usage: |
| mbedtls_printf( USAGE ); |
| goto exit; |
| } |
| |
| opt.mode = DFL_MODE; |
| opt.filename = DFL_FILENAME; |
| opt.ca_file = DFL_CA_FILE; |
| opt.crl_file = DFL_CRL_FILE; |
| opt.ca_path = DFL_CA_PATH; |
| opt.server_name = DFL_SERVER_NAME; |
| opt.server_port = DFL_SERVER_PORT; |
| opt.debug_level = DFL_DEBUG_LEVEL; |
| opt.permissive = DFL_PERMISSIVE; |
| |
| for( i = 1; i < argc; i++ ) |
| { |
| p = argv[i]; |
| if( ( q = strchr( p, '=' ) ) == NULL ) |
| goto usage; |
| *q++ = '\0'; |
| |
| for( j = 0; p + j < q; j++ ) |
| { |
| if( argv[i][j] >= 'A' && argv[i][j] <= 'Z' ) |
| argv[i][j] |= 0x20; |
| } |
| |
| if( strcmp( p, "mode" ) == 0 ) |
| { |
| if( strcmp( q, "file" ) == 0 ) |
| opt.mode = MODE_FILE; |
| else if( strcmp( q, "ssl" ) == 0 ) |
| opt.mode = MODE_SSL; |
| else |
| goto usage; |
| } |
| else if( strcmp( p, "filename" ) == 0 ) |
| opt.filename = q; |
| else if( strcmp( p, "ca_file" ) == 0 ) |
| opt.ca_file = q; |
| else if( strcmp( p, "crl_file" ) == 0 ) |
| opt.crl_file = q; |
| else if( strcmp( p, "ca_path" ) == 0 ) |
| opt.ca_path = q; |
| else if( strcmp( p, "server_name" ) == 0 ) |
| opt.server_name = q; |
| else if( strcmp( p, "server_port" ) == 0 ) |
| opt.server_port = q; |
| else if( strcmp( p, "debug_level" ) == 0 ) |
| { |
| opt.debug_level = atoi( q ); |
| if( opt.debug_level < 0 || opt.debug_level > 65535 ) |
| goto usage; |
| } |
| else if( strcmp( p, "permissive" ) == 0 ) |
| { |
| opt.permissive = atoi( q ); |
| if( opt.permissive < 0 || opt.permissive > 1 ) |
| goto usage; |
| } |
| else |
| goto usage; |
| } |
| |
| /* |
| * 1.1. Load the trusted CA |
| */ |
| mbedtls_printf( " . Loading the CA root certificate ..." ); |
| fflush( stdout ); |
| |
| if( strlen( opt.ca_path ) ) |
| { |
| if( ( ret = mbedtls_x509_crt_parse_path( &cacert, opt.ca_path ) ) < 0 ) |
| { |
| mbedtls_printf( " failed\n ! mbedtls_x509_crt_parse_path returned -0x%x\n\n", (unsigned int) -ret ); |
| goto exit; |
| } |
| |
| verify = 1; |
| } |
| else if( strlen( opt.ca_file ) ) |
| { |
| if( ( ret = mbedtls_x509_crt_parse_file( &cacert, opt.ca_file ) ) < 0 ) |
| { |
| mbedtls_printf( " failed\n ! mbedtls_x509_crt_parse_file returned -0x%x\n\n", (unsigned int) -ret ); |
| goto exit; |
| } |
| |
| verify = 1; |
| } |
| |
| mbedtls_printf( " ok (%d skipped)\n", ret ); |
| |
| #if defined(MBEDTLS_X509_CRL_PARSE_C) |
| if( strlen( opt.crl_file ) ) |
| { |
| if( ( ret = mbedtls_x509_crl_parse_file( &cacrl, opt.crl_file ) ) != 0 ) |
| { |
| mbedtls_printf( " failed\n ! mbedtls_x509_crl_parse returned -0x%x\n\n", (unsigned int) -ret ); |
| goto exit; |
| } |
| |
| verify = 1; |
| } |
| #endif |
| |
| if( opt.mode == MODE_FILE ) |
| { |
| mbedtls_x509_crt crt; |
| mbedtls_x509_crt *cur = &crt; |
| mbedtls_x509_crt_init( &crt ); |
| |
| /* |
| * 1.1. Load the certificate(s) |
| */ |
| mbedtls_printf( "\n . Loading the certificate(s) ..." ); |
| fflush( stdout ); |
| |
| ret = mbedtls_x509_crt_parse_file( &crt, opt.filename ); |
| |
| if( ret < 0 ) |
| { |
| mbedtls_printf( " failed\n ! mbedtls_x509_crt_parse_file returned %d\n\n", ret ); |
| mbedtls_x509_crt_free( &crt ); |
| goto exit; |
| } |
| |
| if( opt.permissive == 0 && ret > 0 ) |
| { |
| mbedtls_printf( " failed\n ! mbedtls_x509_crt_parse failed to parse %d certificates\n\n", ret ); |
| mbedtls_x509_crt_free( &crt ); |
| goto exit; |
| } |
| |
| mbedtls_printf( " ok\n" ); |
| |
| /* |
| * 1.2 Print the certificate(s) |
| */ |
| while( cur != NULL ) |
| { |
| mbedtls_printf( " . Peer certificate information ...\n" ); |
| ret = mbedtls_x509_crt_info( (char *) buf, sizeof( buf ) - 1, " ", |
| cur ); |
| if( ret == -1 ) |
| { |
| mbedtls_printf( " failed\n ! mbedtls_x509_crt_info returned %d\n\n", ret ); |
| mbedtls_x509_crt_free( &crt ); |
| goto exit; |
| } |
| |
| mbedtls_printf( "%s\n", buf ); |
| |
| cur = cur->next; |
| } |
| |
| /* |
| * 1.3 Verify the certificate |
| */ |
| if( verify ) |
| { |
| mbedtls_printf( " . Verifying X.509 certificate..." ); |
| |
| if( ( ret = mbedtls_x509_crt_verify( &crt, &cacert, &cacrl, NULL, &flags, |
| my_verify, NULL ) ) != 0 ) |
| { |
| char vrfy_buf[512]; |
| |
| mbedtls_printf( " failed\n" ); |
| |
| mbedtls_x509_crt_verify_info( vrfy_buf, sizeof( vrfy_buf ), " ! ", flags ); |
| |
| mbedtls_printf( "%s\n", vrfy_buf ); |
| } |
| else |
| mbedtls_printf( " ok\n" ); |
| } |
| |
| mbedtls_x509_crt_free( &crt ); |
| } |
| else if( opt.mode == MODE_SSL ) |
| { |
| /* |
| * 1. Initialize the RNG and the session data |
| */ |
| mbedtls_printf( "\n . Seeding the random number generator..." ); |
| fflush( stdout ); |
| |
| mbedtls_entropy_init( &entropy ); |
| if( ( ret = mbedtls_ctr_drbg_seed( &ctr_drbg, mbedtls_entropy_func, &entropy, |
| (const unsigned char *) pers, |
| strlen( pers ) ) ) != 0 ) |
| { |
| mbedtls_printf( " failed\n ! mbedtls_ctr_drbg_seed returned %d\n", ret ); |
| goto ssl_exit; |
| } |
| |
| mbedtls_printf( " ok\n" ); |
| |
| #if defined(MBEDTLS_DEBUG_C) |
| mbedtls_debug_set_threshold( opt.debug_level ); |
| #endif |
| |
| /* |
| * 2. Start the connection |
| */ |
| mbedtls_printf( " . SSL connection to tcp/%s/%s...", opt.server_name, |
| opt.server_port ); |
| fflush( stdout ); |
| |
| if( ( ret = mbedtls_net_connect( &server_fd, opt.server_name, |
| opt.server_port, MBEDTLS_NET_PROTO_TCP ) ) != 0 ) |
| { |
| mbedtls_printf( " failed\n ! mbedtls_net_connect returned %d\n\n", ret ); |
| goto ssl_exit; |
| } |
| |
| /* |
| * 3. Setup stuff |
| */ |
| if( ( ret = mbedtls_ssl_config_defaults( &conf, |
| MBEDTLS_SSL_IS_CLIENT, |
| MBEDTLS_SSL_TRANSPORT_STREAM, |
| MBEDTLS_SSL_PRESET_DEFAULT ) ) != 0 ) |
| { |
| mbedtls_printf( " failed\n ! mbedtls_ssl_config_defaults returned %d\n\n", ret ); |
| goto exit; |
| } |
| |
| if( verify ) |
| { |
| mbedtls_ssl_conf_authmode( &conf, MBEDTLS_SSL_VERIFY_REQUIRED ); |
| mbedtls_ssl_conf_ca_chain( &conf, &cacert, NULL ); |
| mbedtls_ssl_conf_verify( &conf, my_verify, NULL ); |
| } |
| else |
| mbedtls_ssl_conf_authmode( &conf, MBEDTLS_SSL_VERIFY_NONE ); |
| |
| mbedtls_ssl_conf_rng( &conf, mbedtls_ctr_drbg_random, &ctr_drbg ); |
| mbedtls_ssl_conf_dbg( &conf, my_debug, stdout ); |
| |
| if( ( ret = mbedtls_ssl_setup( &ssl, &conf ) ) != 0 ) |
| { |
| mbedtls_printf( " failed\n ! mbedtls_ssl_setup returned %d\n\n", ret ); |
| goto ssl_exit; |
| } |
| |
| if( ( ret = mbedtls_ssl_set_hostname( &ssl, opt.server_name ) ) != 0 ) |
| { |
| mbedtls_printf( " failed\n ! mbedtls_ssl_set_hostname returned %d\n\n", ret ); |
| goto ssl_exit; |
| } |
| |
| mbedtls_ssl_set_bio( &ssl, &server_fd, mbedtls_net_send, mbedtls_net_recv, NULL ); |
| |
| /* |
| * 4. Handshake |
| */ |
| while( ( ret = mbedtls_ssl_handshake( &ssl ) ) != 0 ) |
| { |
| if( ret != MBEDTLS_ERR_SSL_WANT_READ && ret != MBEDTLS_ERR_SSL_WANT_WRITE ) |
| { |
| mbedtls_printf( " failed\n ! mbedtls_ssl_handshake returned %d\n\n", ret ); |
| goto ssl_exit; |
| } |
| } |
| |
| mbedtls_printf( " ok\n" ); |
| |
| /* |
| * 5. Print the certificate |
| */ |
| #if !defined(MBEDTLS_SSL_KEEP_PEER_CERTIFICATE) |
| mbedtls_printf( " . Peer certificate information ... skipped\n" ); |
| #else |
| mbedtls_printf( " . Peer certificate information ...\n" ); |
| ret = mbedtls_x509_crt_info( (char *) buf, sizeof( buf ) - 1, " ", |
| mbedtls_ssl_get_peer_cert( &ssl ) ); |
| if( ret == -1 ) |
| { |
| mbedtls_printf( " failed\n ! mbedtls_x509_crt_info returned %d\n\n", ret ); |
| goto ssl_exit; |
| } |
| |
| mbedtls_printf( "%s\n", buf ); |
| #endif /* MBEDTLS_SSL_KEEP_PEER_CERTIFICATE */ |
| |
| mbedtls_ssl_close_notify( &ssl ); |
| |
| ssl_exit: |
| mbedtls_ssl_free( &ssl ); |
| mbedtls_ssl_config_free( &conf ); |
| } |
| else |
| goto usage; |
| |
| exit_code = MBEDTLS_EXIT_SUCCESS; |
| |
| exit: |
| |
| mbedtls_net_free( &server_fd ); |
| mbedtls_x509_crt_free( &cacert ); |
| #if defined(MBEDTLS_X509_CRL_PARSE_C) |
| mbedtls_x509_crl_free( &cacrl ); |
| #endif |
| mbedtls_ctr_drbg_free( &ctr_drbg ); |
| mbedtls_entropy_free( &entropy ); |
| |
| #if defined(_WIN32) |
| mbedtls_printf( " + Press Enter to exit this program.\n" ); |
| fflush( stdout ); getchar(); |
| #endif |
| |
| mbedtls_exit( exit_code ); |
| } |
| #endif /* MBEDTLS_BIGNUM_C && MBEDTLS_ENTROPY_C && MBEDTLS_SSL_TLS_C && |
| MBEDTLS_SSL_CLI_C && MBEDTLS_NET_C && MBEDTLS_RSA_C && |
| MBEDTLS_X509_CRT_PARSE_C && MBEDTLS_FS_IO && MBEDTLS_CTR_DRBG_C */ |