| /* |
| * PSA AEAD driver entry points |
| */ |
| /* |
| * Copyright The Mbed TLS Contributors |
| * SPDX-License-Identifier: Apache-2.0 |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); you may |
| * not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #ifndef PSA_CRYPTO_AEAD_H |
| #define PSA_CRYPTO_AEAD_H |
| |
| #include <psa/crypto.h> |
| |
| /** |
| * \brief Process an authenticated encryption operation. |
| * |
| * \note The signature of this function is that of a PSA driver |
| * aead_encrypt entry point. This function behaves as an aead_encrypt |
| * entry point as defined in the PSA driver interface specification for |
| * transparent drivers. |
| * |
| * \param[in] attributes The attributes of the key to use for the |
| * operation. |
| * \param[in] key_buffer The buffer containing the key context. |
| * \param key_buffer_size Size of the \p key_buffer buffer in bytes. |
| * \param alg The AEAD algorithm to compute. |
| * \param[in] nonce Nonce or IV to use. |
| * \param nonce_length Size of the nonce buffer in bytes. This must |
| * be appropriate for the selected algorithm. |
| * The default nonce size is |
| * PSA_AEAD_NONCE_LENGTH(key_type, alg) where |
| * key_type is the type of key. |
| * \param[in] additional_data Additional data that will be authenticated |
| * but not encrypted. |
| * \param additional_data_length Size of additional_data in bytes. |
| * \param[in] plaintext Data that will be authenticated and encrypted. |
| * \param plaintext_length Size of plaintext in bytes. |
| * \param[out] ciphertext Output buffer for the authenticated and |
| * encrypted data. The additional data is not |
| * part of this output. For algorithms where the |
| * encrypted data and the authentication tag are |
| * defined as separate outputs, the |
| * authentication tag is appended to the |
| * encrypted data. |
| * \param ciphertext_size Size of the ciphertext buffer in bytes. This |
| * must be appropriate for the selected algorithm |
| * and key: |
| * - A sufficient output size is |
| * PSA_AEAD_ENCRYPT_OUTPUT_SIZE(key_type, alg, |
| * plaintext_length) where key_type is the type |
| * of key. |
| * - PSA_AEAD_ENCRYPT_OUTPUT_MAX_SIZE( |
| * plaintext_length) evaluates to the maximum |
| * ciphertext size of any supported AEAD |
| * encryption. |
| * \param[out] ciphertext_length On success, the size of the output in the |
| * ciphertext buffer. |
| * |
| * \retval #PSA_SUCCESS Success. |
| * \retval #PSA_ERROR_NOT_SUPPORTED |
| * \p alg is not supported. |
| * \retval #PSA_ERROR_INSUFFICIENT_MEMORY |
| * \retval #PSA_ERROR_BUFFER_TOO_SMALL |
| * ciphertext_size is too small. |
| * \retval #PSA_ERROR_CORRUPTION_DETECTED |
| */ |
| psa_status_t mbedtls_psa_aead_encrypt( |
| const psa_key_attributes_t *attributes, |
| const uint8_t *key_buffer, size_t key_buffer_size, |
| psa_algorithm_t alg, |
| const uint8_t *nonce, size_t nonce_length, |
| const uint8_t *additional_data, size_t additional_data_length, |
| const uint8_t *plaintext, size_t plaintext_length, |
| uint8_t *ciphertext, size_t ciphertext_size, size_t *ciphertext_length ); |
| |
| /** |
| * \brief Process an authenticated decryption operation. |
| * |
| * \note The signature of this function is that of a PSA driver |
| * aead_decrypt entry point. This function behaves as an aead_decrypt |
| * entry point as defined in the PSA driver interface specification for |
| * transparent drivers. |
| * |
| * \param[in] attributes The attributes of the key to use for the |
| * operation. |
| * \param[in] key_buffer The buffer containing the key context. |
| * \param key_buffer_size Size of the \p key_buffer buffer in bytes. |
| * \param alg The AEAD algorithm to compute. |
| * \param[in] nonce Nonce or IV to use. |
| * \param nonce_length Size of the nonce buffer in bytes. This must |
| * be appropriate for the selected algorithm. |
| * The default nonce size is |
| * PSA_AEAD_NONCE_LENGTH(key_type, alg) where |
| * key_type is the type of key. |
| * \param[in] additional_data Additional data that has been authenticated |
| * but not encrypted. |
| * \param additional_data_length Size of additional_data in bytes. |
| * \param[in] ciphertext Data that has been authenticated and |
| * encrypted. For algorithms where the encrypted |
| * data and the authentication tag are defined |
| * as separate inputs, the buffer contains |
| * encrypted data followed by the authentication |
| * tag. |
| * \param ciphertext_length Size of ciphertext in bytes. |
| * \param[out] plaintext Output buffer for the decrypted data. |
| * \param plaintext_size Size of the plaintext buffer in bytes. This |
| * must be appropriate for the selected algorithm |
| * and key: |
| * - A sufficient output size is |
| * PSA_AEAD_DECRYPT_OUTPUT_SIZE(key_type, alg, |
| * ciphertext_length) where key_type is the |
| * type of key. |
| * - PSA_AEAD_DECRYPT_OUTPUT_MAX_SIZE( |
| * ciphertext_length) evaluates to the maximum |
| * plaintext size of any supported AEAD |
| * decryption. |
| * \param[out] plaintext_length On success, the size of the output in the |
| * plaintext buffer. |
| * |
| * \retval #PSA_SUCCESS Success. |
| * \retval #PSA_ERROR_INVALID_SIGNATURE |
| * The cipher is not authentic. |
| * \retval #PSA_ERROR_NOT_SUPPORTED |
| * \p alg is not supported. |
| * \retval #PSA_ERROR_INSUFFICIENT_MEMORY |
| * \retval #PSA_ERROR_BUFFER_TOO_SMALL |
| * plaintext_size is too small. |
| * \retval #PSA_ERROR_CORRUPTION_DETECTED |
| */ |
| psa_status_t mbedtls_psa_aead_decrypt( |
| const psa_key_attributes_t *attributes, |
| const uint8_t *key_buffer, size_t key_buffer_size, |
| psa_algorithm_t alg, |
| const uint8_t *nonce, size_t nonce_length, |
| const uint8_t *additional_data, size_t additional_data_length, |
| const uint8_t *ciphertext, size_t ciphertext_length, |
| uint8_t *plaintext, size_t plaintext_size, size_t *plaintext_length ); |
| |
| /** Set the key for a multipart authenticated encryption operation. |
| * |
| * \note The signature of this function is that of a PSA driver |
| * aead_encrypt_setup entry point. This function behaves as an |
| * aead_encrypt_setup entry point as defined in the PSA driver interface |
| * specification for transparent drivers. |
| * |
| * If an error occurs at any step after a call to |
| * mbedtls_psa_aead_encrypt_setup(), the operation is reset by the PSA core by a |
| * call to mbedtls_psa_aead_abort(). The PSA core may call |
| * mbedtls_psa_aead_abort() at any time after the operation has been |
| * initialized, and is required to when the operation is no longer needed. |
| * |
| * \param[in,out] operation The operation object to set up. It must have |
| * been initialized as per the documentation for |
| * #mbedtls_psa_aead_operation_t and not yet in |
| * use. |
| * \param[in] attributes The attributes of the key to use for the |
| * operation. |
| * \param[in] key_buffer The buffer containing the key context. |
| * \param key_buffer_size Size of the \p key_buffer buffer in bytes. |
| It must be consistent with the size in bits |
| recorded in \p attributes. |
| * \param alg The AEAD algorithm to compute |
| * (\c PSA_ALG_XXX value such that |
| * #PSA_ALG_IS_AEAD(\p alg) is true). |
| * |
| * \retval #PSA_SUCCESS |
| * Success. |
| * \retval #PSA_ERROR_INVALID_ARGUMENT |
| * An invalid block length was supplied. |
| * \retval #PSA_ERROR_NOT_SUPPORTED |
| * \p alg is not supported. |
| * \retval #PSA_ERROR_INSUFFICIENT_MEMORY |
| * Failed to allocate memory for key material |
| */ |
| psa_status_t mbedtls_psa_aead_encrypt_setup( |
| mbedtls_psa_aead_operation_t *operation, |
| const psa_key_attributes_t *attributes, |
| const uint8_t *key_buffer, |
| size_t key_buffer_size, |
| psa_algorithm_t alg ); |
| |
| /** Set the key for a multipart authenticated decryption operation. |
| * |
| * \note The signature of this function is that of a PSA driver |
| * aead_decrypt_setup entry point. This function behaves as an |
| * aead_decrypt_setup entry point as defined in the PSA driver interface |
| * specification for transparent drivers. |
| * |
| * If an error occurs at any step after a call to |
| * mbedtls_psa_aead_decrypt_setup(), the PSA core resets the operation by a |
| * call to mbedtls_psa_aead_abort(). The PSA core may call |
| * mbedtls_psa_aead_abort() at any time after the operation has been |
| * initialized, and is required to when the operation is no longer needed. |
| * |
| * \param[in,out] operation The operation object to set up. It must have |
| * been initialized as per the documentation for |
| * #mbedtls_psa_aead_operation_t and not yet in |
| * use. |
| * \param[in] attributes The attributes of the key to use for the |
| * operation. |
| * \param[in] key_buffer The buffer containing the key context. |
| * \param key_buffer_size Size of the \p key_buffer buffer in bytes. |
| It must be consistent with the size in bits |
| recorded in \p attributes. |
| * \param alg The AEAD algorithm to compute |
| * (\c PSA_ALG_XXX value such that |
| * #PSA_ALG_IS_AEAD(\p alg) is true). |
| * |
| * \retval #PSA_SUCCESS |
| * Success. |
| * \retval #PSA_ERROR_INVALID_ARGUMENT |
| * An invalid block length was supplied. |
| * \retval #PSA_ERROR_NOT_SUPPORTED |
| * \p alg is not supported. |
| * \retval #PSA_ERROR_INSUFFICIENT_MEMORY |
| * Failed to allocate memory for key material |
| */ |
| psa_status_t mbedtls_psa_aead_decrypt_setup( |
| mbedtls_psa_aead_operation_t *operation, |
| const psa_key_attributes_t *attributes, |
| const uint8_t *key_buffer, |
| size_t key_buffer_size, |
| psa_algorithm_t alg ); |
| |
| /** Set the nonce for an authenticated encryption or decryption operation. |
| * |
| * \note The signature of this function is that of a PSA driver aead_set_nonce |
| * entry point. This function behaves as an aead_set_nonce entry point as |
| * defined in the PSA driver interface specification for transparent |
| * drivers. |
| * |
| * This function sets the nonce for the authenticated |
| * encryption or decryption operation. |
| * |
| * The PSA core calls mbedtls_psa_aead_encrypt_setup() or |
| * mbedtls_psa_aead_decrypt_setup() before calling this function. |
| * |
| * If this function returns an error status, the PSA core will call |
| * mbedtls_psa_aead_abort(). |
| * |
| * \param[in,out] operation Active AEAD operation. |
| * \param[in] nonce Buffer containing the nonce to use. |
| * \param nonce_length Size of the nonce in bytes. |
| * |
| * \retval #PSA_SUCCESS |
| * Success. |
| * \retval #PSA_ERROR_INVALID_ARGUMENT |
| * The size of \p nonce is not acceptable for the chosen algorithm. |
| * \retval #PSA_ERROR_NOT_SUPPORTED |
| * Algorithm previously set is not supported in this configuration of |
| * the library. |
| */ |
| psa_status_t mbedtls_psa_aead_set_nonce( |
| mbedtls_psa_aead_operation_t *operation, |
| const uint8_t *nonce, |
| size_t nonce_length ); |
| |
| /** Declare the lengths of the message and additional data for AEAD. |
| * |
| * \note The signature of this function is that of a PSA driver aead_set_lengths |
| * entry point. This function behaves as an aead_set_lengths entry point |
| * as defined in the PSA driver interface specification for transparent |
| * drivers. |
| * |
| * The PSA core calls this function before calling mbedtls_psa_aead_update_ad() |
| * or mbedtls_psa_aead_update() if the algorithm for the operation requires it. |
| * If the algorithm does not require it, calling this function is optional, but |
| * if this function is called then the implementation must enforce the lengths. |
| * |
| * The PSA core may call this function before or after setting the nonce with |
| * mbedtls_psa_aead_set_nonce(). |
| * |
| * - For #PSA_ALG_CCM, calling this function is required. |
| * - For the other AEAD algorithms defined in this specification, calling |
| * this function is not required. |
| * |
| * If this function returns an error status, the PSA core calls |
| * mbedtls_psa_aead_abort(). |
| * |
| * \param[in,out] operation Active AEAD operation. |
| * \param ad_length Size of the non-encrypted additional |
| * authenticated data in bytes. |
| * \param plaintext_length Size of the plaintext to encrypt in bytes. |
| * |
| * \retval #PSA_SUCCESS |
| * Success. |
| * \retval #PSA_ERROR_INVALID_ARGUMENT |
| * At least one of the lengths is not acceptable for the chosen |
| * algorithm. |
| * \retval #PSA_ERROR_NOT_SUPPORTED |
| * Algorithm previously set is not supported in this configuration of |
| * the library. |
| */ |
| psa_status_t mbedtls_psa_aead_set_lengths( |
| mbedtls_psa_aead_operation_t *operation, |
| size_t ad_length, |
| size_t plaintext_length ); |
| |
| /** Pass additional data to an active AEAD operation. |
| * |
| * \note The signature of this function is that of a PSA driver |
| * aead_update_ad entry point. This function behaves as an aead_update_ad |
| * entry point as defined in the PSA driver interface specification for |
| * transparent drivers. |
| * |
| * Additional data is authenticated, but not encrypted. |
| * |
| * The PSA core can call this function multiple times to pass successive |
| * fragments of the additional data. It will not call this function after |
| * passing data to encrypt or decrypt with mbedtls_psa_aead_update(). |
| * |
| * Before calling this function, the PSA core will: |
| * 1. Call either mbedtls_psa_aead_encrypt_setup() or |
| * mbedtls_psa_aead_decrypt_setup(). |
| * 2. Set the nonce with mbedtls_psa_aead_set_nonce(). |
| * |
| * If this function returns an error status, the PSA core will call |
| * mbedtls_psa_aead_abort(). |
| * |
| * \param[in,out] operation Active AEAD operation. |
| * \param[in] input Buffer containing the fragment of |
| * additional data. |
| * \param input_length Size of the \p input buffer in bytes. |
| * |
| * \retval #PSA_SUCCESS |
| * Success. |
| * \retval #PSA_ERROR_NOT_SUPPORTED |
| * Algorithm previously set is not supported in this configuration of |
| * the library. |
| */ |
| psa_status_t mbedtls_psa_aead_update_ad( |
| mbedtls_psa_aead_operation_t *operation, |
| const uint8_t *input, |
| size_t input_length ); |
| |
| /** Encrypt or decrypt a message fragment in an active AEAD operation. |
| * |
| * \note The signature of this function is that of a PSA driver |
| * aead_update entry point. This function behaves as an aead_update entry |
| * point as defined in the PSA driver interface specification for |
| * transparent drivers. |
| * |
| * Before calling this function, the PSA core will: |
| * 1. Call either mbedtls_psa_aead_encrypt_setup() or |
| * mbedtls_psa_aead_decrypt_setup(). The choice of setup function |
| * determines whether this function encrypts or decrypts its input. |
| * 2. Set the nonce with mbedtls_psa_aead_set_nonce(). |
| * 3. Call mbedtls_psa_aead_update_ad() to pass all the additional data. |
| * |
| * If this function returns an error status, the PSA core will call |
| * mbedtls_psa_aead_abort(). |
| * |
| * This function does not require the input to be aligned to any |
| * particular block boundary. If the implementation can only process |
| * a whole block at a time, it must consume all the input provided, but |
| * it may delay the end of the corresponding output until a subsequent |
| * call to mbedtls_psa_aead_update(), mbedtls_psa_aead_finish() provides |
| * sufficient input. The amount of data that can be delayed in this way is |
| * bounded by #PSA_AEAD_UPDATE_OUTPUT_SIZE. |
| * |
| * \param[in,out] operation Active AEAD operation. |
| * \param[in] input Buffer containing the message fragment to |
| * encrypt or decrypt. |
| * \param input_length Size of the \p input buffer in bytes. |
| * \param[out] output Buffer where the output is to be written. |
| * \param output_size Size of the \p output buffer in bytes. |
| * This must be appropriate for the selected |
| * algorithm and key: |
| * - A sufficient output size is |
| * #PSA_AEAD_UPDATE_OUTPUT_SIZE(\c key_type, |
| * \c alg, \p input_length) where |
| * \c key_type is the type of key and \c alg is |
| * the algorithm that were used to set up the |
| * operation. |
| * - #PSA_AEAD_UPDATE_OUTPUT_MAX_SIZE(\p |
| * input_length) evaluates to the maximum |
| * output size of any supported AEAD |
| * algorithm. |
| * \param[out] output_length On success, the number of bytes |
| * that make up the returned output. |
| * |
| * \retval #PSA_SUCCESS |
| * Success. |
| * |
| * \retval #PSA_ERROR_BUFFER_TOO_SMALL |
| * The size of the \p output buffer is too small. |
| * #PSA_AEAD_UPDATE_OUTPUT_SIZE(\c key_type, \c alg, \p input_length) or |
| * #PSA_AEAD_UPDATE_OUTPUT_MAX_SIZE(\p input_length) can be used to |
| * determine the required buffer size. |
| */ |
| psa_status_t mbedtls_psa_aead_update( |
| mbedtls_psa_aead_operation_t *operation, |
| const uint8_t *input, |
| size_t input_length, |
| uint8_t *output, |
| size_t output_size, |
| size_t *output_length ); |
| |
| /** Finish encrypting a message in an AEAD operation. |
| * |
| * \note The signature of this function is that of a PSA driver |
| * aead_finish entry point. This function behaves as an aead_finish entry |
| * point as defined in the PSA driver interface specification for |
| * transparent drivers. |
| * |
| * The operation must have been set up by the PSA core with |
| * mbedtls_psa_aead_encrypt_setup(). |
| * |
| * This function finishes the authentication of the additional data |
| * formed by concatenating the inputs passed to preceding calls to |
| * mbedtls_psa_aead_update_ad() with the plaintext formed by concatenating the |
| * inputs passed to preceding calls to mbedtls_psa_aead_update(). |
| * |
| * This function has two output buffers: |
| * - \p ciphertext contains trailing ciphertext that was buffered from |
| * preceding calls to mbedtls_psa_aead_update(). |
| * - \p tag contains the authentication tag. |
| * |
| * Whether or not this function returns successfuly, the PSA core subsequently |
| * calls mbedtls_psa_aead_abort() to deactivate the operation. |
| * |
| * \param[in,out] operation Active AEAD operation. |
| * \param[out] ciphertext Buffer where the last part of the ciphertext |
| * is to be written. |
| * \param ciphertext_size Size of the \p ciphertext buffer in bytes. |
| * This must be appropriate for the selected |
| * algorithm and key: |
| * - A sufficient output size is |
| * #PSA_AEAD_FINISH_OUTPUT_SIZE(\c key_type, |
| * \c alg) where \c key_type is the type of key |
| * and \c alg is the algorithm that were used to |
| * set up the operation. |
| * - #PSA_AEAD_FINISH_OUTPUT_MAX_SIZE evaluates to |
| * the maximum output size of any supported AEAD |
| * algorithm. |
| * \param[out] ciphertext_length On success, the number of bytes of |
| * returned ciphertext. |
| * \param[out] tag Buffer where the authentication tag is |
| * to be written. |
| * \param tag_size Size of the \p tag buffer in bytes. |
| * This must be appropriate for the selected |
| * algorithm and key: |
| * - The exact tag size is #PSA_AEAD_TAG_LENGTH(\c |
| * key_type, \c key_bits, \c alg) where |
| * \c key_type and \c key_bits are the type and |
| * bit-size of the key, and \c alg are the |
| * algorithm that were used in the call to |
| * mbedtls_psa_aead_encrypt_setup(). |
| * - #PSA_AEAD_TAG_MAX_SIZE evaluates to the |
| * maximum tag size of any supported AEAD |
| * algorithm. |
| * \param[out] tag_length On success, the number of bytes |
| * that make up the returned tag. |
| * |
| * \retval #PSA_SUCCESS |
| * Success. |
| * \retval #PSA_ERROR_BUFFER_TOO_SMALL |
| * The size of the \p tag buffer is too small. |
| * #PSA_AEAD_TAG_LENGTH(\c key_type, key_bits, \c alg) or |
| * #PSA_AEAD_TAG_MAX_SIZE can be used to determine the required \p tag |
| * buffer size. |
| */ |
| psa_status_t mbedtls_psa_aead_finish( |
| mbedtls_psa_aead_operation_t *operation, |
| uint8_t *ciphertext, |
| size_t ciphertext_size, |
| size_t *ciphertext_length, |
| uint8_t *tag, |
| size_t tag_size, |
| size_t *tag_length ); |
| |
| /** Abort an AEAD operation. |
| * |
| * \note The signature of this function is that of a PSA driver |
| * aead_abort entry point. This function behaves as an aead_abort entry |
| * point as defined in the PSA driver interface specification for |
| * transparent drivers. |
| * |
| * Aborting an operation frees all associated resources except for the |
| * \p operation structure itself. Once aborted, the operation object |
| * can be reused for another operation by the PSA core by it calling |
| * mbedtls_psa_aead_encrypt_setup() or mbedtls_psa_aead_decrypt_setup() again. |
| * |
| * The PSA core may call this function any time after the operation object has |
| * been initialized as described in #mbedtls_psa_aead_operation_t. |
| * |
| * In particular, calling mbedtls_psa_aead_abort() after the operation has been |
| * terminated by a call to mbedtls_psa_aead_abort() or |
| * mbedtls_psa_aead_finish() is safe and has no effect. |
| * |
| * \param[in,out] operation Initialized AEAD operation. |
| * |
| * \retval #PSA_SUCCESS |
| * Success. |
| */ |
| psa_status_t mbedtls_psa_aead_abort( |
| mbedtls_psa_aead_operation_t *operation ); |
| |
| #endif /* PSA_CRYPTO_AEAD */ |
