| /** |
| * \file ssl_misc.h |
| * |
| * \brief Internal functions shared by the SSL modules |
| */ |
| /* |
| * Copyright The Mbed TLS Contributors |
| * SPDX-License-Identifier: Apache-2.0 |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); you may |
| * not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| #ifndef MBEDTLS_SSL_MISC_H |
| #define MBEDTLS_SSL_MISC_H |
| |
| #include "mbedtls/build_info.h" |
| |
| #include "mbedtls/ssl.h" |
| #include "mbedtls/cipher.h" |
| |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) || defined(MBEDTLS_SSL_PROTO_TLS1_3) |
| #include "psa/crypto.h" |
| #include "mbedtls/psa_util.h" |
| #endif |
| |
| #if defined(MBEDTLS_MD5_C) |
| #include "mbedtls/md5.h" |
| #endif |
| |
| #if defined(MBEDTLS_SHA1_C) |
| #include "mbedtls/sha1.h" |
| #endif |
| |
| #if defined(MBEDTLS_SHA256_C) |
| #include "mbedtls/sha256.h" |
| #endif |
| |
| #if defined(MBEDTLS_SHA512_C) |
| #include "mbedtls/sha512.h" |
| #endif |
| |
| #if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED) |
| #include "mbedtls/ecjpake.h" |
| #endif |
| |
| #include "common.h" |
| |
| #if ( defined(__ARMCC_VERSION) || defined(_MSC_VER) ) && \ |
| !defined(inline) && !defined(__cplusplus) |
| #define inline __inline |
| #endif |
| |
| /* Shorthand for restartable ECC */ |
| #if defined(MBEDTLS_ECP_RESTARTABLE) && \ |
| defined(MBEDTLS_SSL_CLI_C) && \ |
| defined(MBEDTLS_SSL_PROTO_TLS1_2) && \ |
| defined(MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED) |
| #define MBEDTLS_SSL_ECP_RESTARTABLE_ENABLED |
| #endif |
| |
| #define MBEDTLS_SSL_INITIAL_HANDSHAKE 0 |
| #define MBEDTLS_SSL_RENEGOTIATION_IN_PROGRESS 1 /* In progress */ |
| #define MBEDTLS_SSL_RENEGOTIATION_DONE 2 /* Done or aborted */ |
| #define MBEDTLS_SSL_RENEGOTIATION_PENDING 3 /* Requested (server only) */ |
| |
| /* |
| * Mask of TLS 1.3 handshake extensions used in extensions_present |
| * of mbedtls_ssl_handshake_params. |
| */ |
| #define MBEDTLS_SSL_EXT_NONE 0 |
| |
| #define MBEDTLS_SSL_EXT_SERVERNAME ( 1 << 0 ) |
| #define MBEDTLS_SSL_EXT_MAX_FRAGMENT_LENGTH ( 1 << 1 ) |
| #define MBEDTLS_SSL_EXT_STATUS_REQUEST ( 1 << 2 ) |
| #define MBEDTLS_SSL_EXT_SUPPORTED_GROUPS ( 1 << 3 ) |
| #define MBEDTLS_SSL_EXT_SIG_ALG ( 1 << 4 ) |
| #define MBEDTLS_SSL_EXT_USE_SRTP ( 1 << 5 ) |
| #define MBEDTLS_SSL_EXT_HEARTBEAT ( 1 << 6 ) |
| #define MBEDTLS_SSL_EXT_ALPN ( 1 << 7 ) |
| #define MBEDTLS_SSL_EXT_SCT ( 1 << 8 ) |
| #define MBEDTLS_SSL_EXT_CLI_CERT_TYPE ( 1 << 9 ) |
| #define MBEDTLS_SSL_EXT_SERV_CERT_TYPE ( 1 << 10 ) |
| #define MBEDTLS_SSL_EXT_PADDING ( 1 << 11 ) |
| #define MBEDTLS_SSL_EXT_PRE_SHARED_KEY ( 1 << 12 ) |
| #define MBEDTLS_SSL_EXT_EARLY_DATA ( 1 << 13 ) |
| #define MBEDTLS_SSL_EXT_SUPPORTED_VERSIONS ( 1 << 14 ) |
| #define MBEDTLS_SSL_EXT_COOKIE ( 1 << 15 ) |
| #define MBEDTLS_SSL_EXT_PSK_KEY_EXCHANGE_MODES ( 1 << 16 ) |
| #define MBEDTLS_SSL_EXT_CERT_AUTH ( 1 << 17 ) |
| #define MBEDTLS_SSL_EXT_OID_FILTERS ( 1 << 18 ) |
| #define MBEDTLS_SSL_EXT_POST_HANDSHAKE_AUTH ( 1 << 19 ) |
| #define MBEDTLS_SSL_EXT_SIG_ALG_CERT ( 1 << 20 ) |
| #define MBEDTLS_SSL_EXT_KEY_SHARE ( 1 << 21 ) |
| |
| /* |
| * Helper macros for function call with return check. |
| */ |
| /* |
| * Exit when return non-zero value |
| */ |
| #define MBEDTLS_SSL_PROC_CHK( f ) \ |
| do { \ |
| ret = ( f ); \ |
| if( ret != 0 ) \ |
| { \ |
| goto cleanup; \ |
| } \ |
| } while( 0 ) |
| /* |
| * Exit when return negative value |
| */ |
| #define MBEDTLS_SSL_PROC_CHK_NEG( f ) \ |
| do { \ |
| ret = ( f ); \ |
| if( ret < 0 ) \ |
| { \ |
| goto cleanup; \ |
| } \ |
| } while( 0 ) |
| |
| /* |
| * DTLS retransmission states, see RFC 6347 4.2.4 |
| * |
| * The SENDING state is merged in PREPARING for initial sends, |
| * but is distinct for resends. |
| * |
| * Note: initial state is wrong for server, but is not used anyway. |
| */ |
| #define MBEDTLS_SSL_RETRANS_PREPARING 0 |
| #define MBEDTLS_SSL_RETRANS_SENDING 1 |
| #define MBEDTLS_SSL_RETRANS_WAITING 2 |
| #define MBEDTLS_SSL_RETRANS_FINISHED 3 |
| |
| /* |
| * Allow extra bytes for record, authentication and encryption overhead: |
| * counter (8) + header (5) + IV(16) + MAC (16-48) + padding (0-256). |
| */ |
| |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_2) |
| |
| /* This macro determines whether CBC is supported. */ |
| #if defined(MBEDTLS_CIPHER_MODE_CBC) && \ |
| ( defined(MBEDTLS_AES_C) || \ |
| defined(MBEDTLS_CAMELLIA_C) || \ |
| defined(MBEDTLS_ARIA_C) || \ |
| defined(MBEDTLS_DES_C) ) |
| #define MBEDTLS_SSL_SOME_SUITES_USE_CBC |
| #endif |
| |
| /* This macro determines whether a ciphersuite using a |
| * stream cipher can be used. */ |
| #if defined(MBEDTLS_CIPHER_NULL_CIPHER) |
| #define MBEDTLS_SSL_SOME_SUITES_USE_STREAM |
| #endif |
| |
| /* This macro determines whether the CBC construct used in TLS 1.2 is supported. */ |
| #if defined(MBEDTLS_SSL_SOME_SUITES_USE_CBC) && \ |
| defined(MBEDTLS_SSL_PROTO_TLS1_2) |
| #define MBEDTLS_SSL_SOME_SUITES_USE_TLS_CBC |
| #endif |
| |
| #if defined(MBEDTLS_SSL_SOME_SUITES_USE_STREAM) || \ |
| defined(MBEDTLS_SSL_SOME_SUITES_USE_CBC) |
| #define MBEDTLS_SSL_SOME_SUITES_USE_MAC |
| #endif |
| |
| /* This macro determines whether a ciphersuite uses Encrypt-then-MAC with CBC */ |
| #if defined(MBEDTLS_SSL_SOME_SUITES_USE_CBC) && \ |
| defined(MBEDTLS_SSL_ENCRYPT_THEN_MAC) |
| #define MBEDTLS_SSL_SOME_SUITES_USE_CBC_ETM |
| #endif |
| |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_2 */ |
| |
| #if defined(MBEDTLS_SSL_SOME_SUITES_USE_MAC) |
| /* Ciphersuites using HMAC */ |
| #if defined(MBEDTLS_SHA384_C) |
| #define MBEDTLS_SSL_MAC_ADD 48 /* SHA-384 used for HMAC */ |
| #elif defined(MBEDTLS_SHA256_C) |
| #define MBEDTLS_SSL_MAC_ADD 32 /* SHA-256 used for HMAC */ |
| #else |
| #define MBEDTLS_SSL_MAC_ADD 20 /* SHA-1 used for HMAC */ |
| #endif |
| #else /* MBEDTLS_SSL_SOME_SUITES_USE_MAC */ |
| /* AEAD ciphersuites: GCM and CCM use a 128 bits tag */ |
| #define MBEDTLS_SSL_MAC_ADD 16 |
| #endif |
| |
| #if defined(MBEDTLS_CIPHER_MODE_CBC) |
| #define MBEDTLS_SSL_PADDING_ADD 256 |
| #else |
| #define MBEDTLS_SSL_PADDING_ADD 0 |
| #endif |
| |
| #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) |
| #define MBEDTLS_SSL_MAX_CID_EXPANSION MBEDTLS_SSL_CID_TLS1_3_PADDING_GRANULARITY |
| #else |
| #define MBEDTLS_SSL_MAX_CID_EXPANSION 0 |
| #endif |
| |
| #define MBEDTLS_SSL_PAYLOAD_OVERHEAD ( MBEDTLS_MAX_IV_LENGTH + \ |
| MBEDTLS_SSL_MAC_ADD + \ |
| MBEDTLS_SSL_PADDING_ADD + \ |
| MBEDTLS_SSL_MAX_CID_EXPANSION \ |
| ) |
| |
| #define MBEDTLS_SSL_IN_PAYLOAD_LEN ( MBEDTLS_SSL_PAYLOAD_OVERHEAD + \ |
| ( MBEDTLS_SSL_IN_CONTENT_LEN ) ) |
| |
| #define MBEDTLS_SSL_OUT_PAYLOAD_LEN ( MBEDTLS_SSL_PAYLOAD_OVERHEAD + \ |
| ( MBEDTLS_SSL_OUT_CONTENT_LEN ) ) |
| |
| /* The maximum number of buffered handshake messages. */ |
| #define MBEDTLS_SSL_MAX_BUFFERED_HS 4 |
| |
| /* Maximum length we can advertise as our max content length for |
| RFC 6066 max_fragment_length extension negotiation purposes |
| (the lesser of both sizes, if they are unequal.) |
| */ |
| #define MBEDTLS_TLS_EXT_ADV_CONTENT_LEN ( \ |
| (MBEDTLS_SSL_IN_CONTENT_LEN > MBEDTLS_SSL_OUT_CONTENT_LEN) \ |
| ? ( MBEDTLS_SSL_OUT_CONTENT_LEN ) \ |
| : ( MBEDTLS_SSL_IN_CONTENT_LEN ) \ |
| ) |
| |
| /* Maximum size in bytes of list in signature algorithms ext., RFC 5246/8446 */ |
| #define MBEDTLS_SSL_MAX_SIG_ALG_LIST_LEN 65534 |
| |
| /* Minimum size in bytes of list in signature algorithms ext., RFC 5246/8446 */ |
| #define MBEDTLS_SSL_MIN_SIG_ALG_LIST_LEN 2 |
| |
| /* Maximum size in bytes of list in supported elliptic curve ext., RFC 4492 */ |
| #define MBEDTLS_SSL_MAX_CURVE_LIST_LEN 65535 |
| |
| #define MBEDTLS_RECEIVED_SIG_ALGS_SIZE 20 |
| |
| /* |
| * Check that we obey the standard's message size bounds |
| */ |
| |
| #if MBEDTLS_SSL_IN_CONTENT_LEN > 16384 |
| #error "Bad configuration - incoming record content too large." |
| #endif |
| |
| #if MBEDTLS_SSL_OUT_CONTENT_LEN > 16384 |
| #error "Bad configuration - outgoing record content too large." |
| #endif |
| |
| #if MBEDTLS_SSL_IN_PAYLOAD_LEN > MBEDTLS_SSL_IN_CONTENT_LEN + 2048 |
| #error "Bad configuration - incoming protected record payload too large." |
| #endif |
| |
| #if MBEDTLS_SSL_OUT_PAYLOAD_LEN > MBEDTLS_SSL_OUT_CONTENT_LEN + 2048 |
| #error "Bad configuration - outgoing protected record payload too large." |
| #endif |
| |
| /* Calculate buffer sizes */ |
| |
| /* Note: Even though the TLS record header is only 5 bytes |
| long, we're internally using 8 bytes to store the |
| implicit sequence number. */ |
| #define MBEDTLS_SSL_HEADER_LEN 13 |
| |
| #if !defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) |
| #define MBEDTLS_SSL_IN_BUFFER_LEN \ |
| ( ( MBEDTLS_SSL_HEADER_LEN ) + ( MBEDTLS_SSL_IN_PAYLOAD_LEN ) ) |
| #else |
| #define MBEDTLS_SSL_IN_BUFFER_LEN \ |
| ( ( MBEDTLS_SSL_HEADER_LEN ) + ( MBEDTLS_SSL_IN_PAYLOAD_LEN ) \ |
| + ( MBEDTLS_SSL_CID_IN_LEN_MAX ) ) |
| #endif |
| |
| #if !defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) |
| #define MBEDTLS_SSL_OUT_BUFFER_LEN \ |
| ( ( MBEDTLS_SSL_HEADER_LEN ) + ( MBEDTLS_SSL_OUT_PAYLOAD_LEN ) ) |
| #else |
| #define MBEDTLS_SSL_OUT_BUFFER_LEN \ |
| ( ( MBEDTLS_SSL_HEADER_LEN ) + ( MBEDTLS_SSL_OUT_PAYLOAD_LEN ) \ |
| + ( MBEDTLS_SSL_CID_OUT_LEN_MAX ) ) |
| #endif |
| |
| #define MBEDTLS_CLIENT_HELLO_RANDOM_LEN 32 |
| #define MBEDTLS_SERVER_HELLO_RANDOM_LEN 32 |
| |
| #if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH) |
| /** |
| * \brief Return the maximum fragment length (payload, in bytes) for |
| * the output buffer. For the client, this is the configured |
| * value. For the server, it is the minimum of two - the |
| * configured value and the negotiated one. |
| * |
| * \sa mbedtls_ssl_conf_max_frag_len() |
| * \sa mbedtls_ssl_get_max_out_record_payload() |
| * |
| * \param ssl SSL context |
| * |
| * \return Current maximum fragment length for the output buffer. |
| */ |
| size_t mbedtls_ssl_get_output_max_frag_len( const mbedtls_ssl_context *ssl ); |
| |
| /** |
| * \brief Return the maximum fragment length (payload, in bytes) for |
| * the input buffer. This is the negotiated maximum fragment |
| * length, or, if there is none, MBEDTLS_SSL_IN_CONTENT_LEN. |
| * If it is not defined either, the value is 2^14. This function |
| * works as its predecessor, \c mbedtls_ssl_get_max_frag_len(). |
| * |
| * \sa mbedtls_ssl_conf_max_frag_len() |
| * \sa mbedtls_ssl_get_max_in_record_payload() |
| * |
| * \param ssl SSL context |
| * |
| * \return Current maximum fragment length for the output buffer. |
| */ |
| size_t mbedtls_ssl_get_input_max_frag_len( const mbedtls_ssl_context *ssl ); |
| #endif /* MBEDTLS_SSL_MAX_FRAGMENT_LENGTH */ |
| |
| #if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH) |
| static inline size_t mbedtls_ssl_get_output_buflen( const mbedtls_ssl_context *ctx ) |
| { |
| #if defined (MBEDTLS_SSL_DTLS_CONNECTION_ID) |
| return mbedtls_ssl_get_output_max_frag_len( ctx ) |
| + MBEDTLS_SSL_HEADER_LEN + MBEDTLS_SSL_PAYLOAD_OVERHEAD |
| + MBEDTLS_SSL_CID_OUT_LEN_MAX; |
| #else |
| return mbedtls_ssl_get_output_max_frag_len( ctx ) |
| + MBEDTLS_SSL_HEADER_LEN + MBEDTLS_SSL_PAYLOAD_OVERHEAD; |
| #endif |
| } |
| |
| static inline size_t mbedtls_ssl_get_input_buflen( const mbedtls_ssl_context *ctx ) |
| { |
| #if defined (MBEDTLS_SSL_DTLS_CONNECTION_ID) |
| return mbedtls_ssl_get_input_max_frag_len( ctx ) |
| + MBEDTLS_SSL_HEADER_LEN + MBEDTLS_SSL_PAYLOAD_OVERHEAD |
| + MBEDTLS_SSL_CID_IN_LEN_MAX; |
| #else |
| return mbedtls_ssl_get_input_max_frag_len( ctx ) |
| + MBEDTLS_SSL_HEADER_LEN + MBEDTLS_SSL_PAYLOAD_OVERHEAD; |
| #endif |
| } |
| #endif |
| |
| /* |
| * TLS extension flags (for extensions with outgoing ServerHello content |
| * that need it (e.g. for RENEGOTIATION_INFO the server already knows because |
| * of state of the renegotiation flag, so no indicator is required) |
| */ |
| #define MBEDTLS_TLS_EXT_SUPPORTED_POINT_FORMATS_PRESENT (1 << 0) |
| #define MBEDTLS_TLS_EXT_ECJPAKE_KKPP_OK (1 << 1) |
| |
| /** |
| * \brief This function checks if the remaining size in a buffer is |
| * greater or equal than a needed space. |
| * |
| * \param cur Pointer to the current position in the buffer. |
| * \param end Pointer to one past the end of the buffer. |
| * \param need Needed space in bytes. |
| * |
| * \return Zero if the needed space is available in the buffer, non-zero |
| * otherwise. |
| */ |
| static inline int mbedtls_ssl_chk_buf_ptr( const uint8_t *cur, |
| const uint8_t *end, size_t need ) |
| { |
| return( ( cur > end ) || ( need > (size_t)( end - cur ) ) ); |
| } |
| |
| /** |
| * \brief This macro checks if the remaining size in a buffer is |
| * greater or equal than a needed space. If it is not the case, |
| * it returns an SSL_BUFFER_TOO_SMALL error. |
| * |
| * \param cur Pointer to the current position in the buffer. |
| * \param end Pointer to one past the end of the buffer. |
| * \param need Needed space in bytes. |
| * |
| */ |
| #define MBEDTLS_SSL_CHK_BUF_PTR( cur, end, need ) \ |
| do { \ |
| if( mbedtls_ssl_chk_buf_ptr( ( cur ), ( end ), ( need ) ) != 0 ) \ |
| { \ |
| return( MBEDTLS_ERR_SSL_BUFFER_TOO_SMALL ); \ |
| } \ |
| } while( 0 ) |
| |
| /** |
| * \brief This macro checks if the remaining length in an input buffer is |
| * greater or equal than a needed length. If it is not the case, it |
| * returns #MBEDTLS_ERR_SSL_DECODE_ERROR error and pends a |
| * #MBEDTLS_SSL_ALERT_MSG_DECODE_ERROR alert message. |
| * |
| * This is a function-like macro. It is guaranteed to evaluate each |
| * argument exactly once. |
| * |
| * \param cur Pointer to the current position in the buffer. |
| * \param end Pointer to one past the end of the buffer. |
| * \param need Needed length in bytes. |
| * |
| */ |
| #define MBEDTLS_SSL_CHK_BUF_READ_PTR( cur, end, need ) \ |
| do { \ |
| if( mbedtls_ssl_chk_buf_ptr( ( cur ), ( end ), ( need ) ) != 0 ) \ |
| { \ |
| MBEDTLS_SSL_DEBUG_MSG( 1, \ |
| ( "missing input data in %s", __func__ ) ); \ |
| MBEDTLS_SSL_PEND_FATAL_ALERT( MBEDTLS_SSL_ALERT_MSG_DECODE_ERROR, \ |
| MBEDTLS_ERR_SSL_DECODE_ERROR ); \ |
| return( MBEDTLS_ERR_SSL_DECODE_ERROR ); \ |
| } \ |
| } while( 0 ) |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_2) && \ |
| defined(MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED) |
| /* |
| * Abstraction for a grid of allowed signature-hash-algorithm pairs. |
| */ |
| struct mbedtls_ssl_sig_hash_set_t |
| { |
| /* At the moment, we only need to remember a single suitable |
| * hash algorithm per signature algorithm. As long as that's |
| * the case - and we don't need a general lookup function - |
| * we can implement the sig-hash-set as a map from signatures |
| * to hash algorithms. */ |
| mbedtls_md_type_t rsa; |
| mbedtls_md_type_t ecdsa; |
| }; |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_2 && |
| MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED */ |
| |
| typedef int mbedtls_ssl_tls_prf_cb( const unsigned char *secret, size_t slen, |
| const char *label, |
| const unsigned char *random, size_t rlen, |
| unsigned char *dstbuf, size_t dlen ); |
| |
| /* cipher.h exports the maximum IV, key and block length from |
| * all ciphers enabled in the config, regardless of whether those |
| * ciphers are actually usable in SSL/TLS. Notably, XTS is enabled |
| * in the default configuration and uses 64 Byte keys, but it is |
| * not used for record protection in SSL/TLS. |
| * |
| * In order to prevent unnecessary inflation of key structures, |
| * we introduce SSL-specific variants of the max-{key,block,IV} |
| * macros here which are meant to only take those ciphers into |
| * account which can be negotiated in SSL/TLS. |
| * |
| * Since the current definitions of MBEDTLS_MAX_{KEY|BLOCK|IV}_LENGTH |
| * in cipher.h are rough overapproximations of the real maxima, here |
| * we content ourselves with replicating those overapproximations |
| * for the maximum block and IV length, and excluding XTS from the |
| * computation of the maximum key length. */ |
| #define MBEDTLS_SSL_MAX_BLOCK_LENGTH 16 |
| #define MBEDTLS_SSL_MAX_IV_LENGTH 16 |
| #define MBEDTLS_SSL_MAX_KEY_LENGTH 32 |
| |
| /** |
| * \brief The data structure holding the cryptographic material (key and IV) |
| * used for record protection in TLS 1.3. |
| */ |
| struct mbedtls_ssl_key_set |
| { |
| /*! The key for client->server records. */ |
| unsigned char client_write_key[ MBEDTLS_SSL_MAX_KEY_LENGTH ]; |
| /*! The key for server->client records. */ |
| unsigned char server_write_key[ MBEDTLS_SSL_MAX_KEY_LENGTH ]; |
| /*! The IV for client->server records. */ |
| unsigned char client_write_iv[ MBEDTLS_SSL_MAX_IV_LENGTH ]; |
| /*! The IV for server->client records. */ |
| unsigned char server_write_iv[ MBEDTLS_SSL_MAX_IV_LENGTH ]; |
| |
| size_t key_len; /*!< The length of client_write_key and |
| * server_write_key, in Bytes. */ |
| size_t iv_len; /*!< The length of client_write_iv and |
| * server_write_iv, in Bytes. */ |
| }; |
| typedef struct mbedtls_ssl_key_set mbedtls_ssl_key_set; |
| |
| typedef struct |
| { |
| unsigned char binder_key [ MBEDTLS_TLS1_3_MD_MAX_SIZE ]; |
| unsigned char client_early_traffic_secret [ MBEDTLS_TLS1_3_MD_MAX_SIZE ]; |
| unsigned char early_exporter_master_secret[ MBEDTLS_TLS1_3_MD_MAX_SIZE ]; |
| } mbedtls_ssl_tls13_early_secrets; |
| |
| typedef struct |
| { |
| unsigned char client_handshake_traffic_secret[ MBEDTLS_TLS1_3_MD_MAX_SIZE ]; |
| unsigned char server_handshake_traffic_secret[ MBEDTLS_TLS1_3_MD_MAX_SIZE ]; |
| } mbedtls_ssl_tls13_handshake_secrets; |
| |
| /* |
| * This structure contains the parameters only needed during handshake. |
| */ |
| struct mbedtls_ssl_handshake_params |
| { |
| /* Frequently-used boolean or byte fields (placed early to take |
| * advantage of smaller code size for indirect access on Arm Thumb) */ |
| uint8_t resume; /*!< session resume indicator*/ |
| uint8_t cli_exts; /*!< client extension presence*/ |
| |
| #if defined(MBEDTLS_SSL_SERVER_NAME_INDICATION) |
| uint8_t sni_authmode; /*!< authmode from SNI callback */ |
| #endif |
| |
| #if defined(MBEDTLS_SSL_SESSION_TICKETS) |
| uint8_t new_session_ticket; /*!< use NewSessionTicket? */ |
| #endif /* MBEDTLS_SSL_SESSION_TICKETS */ |
| |
| #if defined(MBEDTLS_SSL_CLI_C) |
| /** Minimum TLS version to be negotiated. |
| * |
| * It is set up in the ClientHello writing preparation stage and used |
| * throughout the ClientHello writing. Not relevant anymore as soon as |
| * the protocol version has been negotiated thus as soon as the |
| * ServerHello is received. |
| * For a fresh handshake not linked to any previous handshake, it is |
| * equal to the configured minimum minor version to be negotiated. When |
| * renegotiating or resuming a session, it is equal to the previously |
| * negotiated minor version. |
| * |
| * There is no maximum TLS version field in this handshake context. |
| * From the start of the handshake, we need to define a current protocol |
| * version for the record layer which we define as the maximum TLS |
| * version to be negotiated. The `tls_version` field of the SSL context is |
| * used to store this maximum value until it contains the actual |
| * negotiated value. |
| */ |
| mbedtls_ssl_protocol_version min_tls_version; |
| #endif |
| |
| #if defined(MBEDTLS_SSL_EXTENDED_MASTER_SECRET) |
| uint8_t extended_ms; /*!< use Extended Master Secret? */ |
| #endif |
| |
| #if defined(MBEDTLS_SSL_ASYNC_PRIVATE) |
| uint8_t async_in_progress; /*!< an asynchronous operation is in progress */ |
| #endif /* MBEDTLS_SSL_ASYNC_PRIVATE */ |
| |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) |
| unsigned char retransmit_state; /*!< Retransmission state */ |
| #endif |
| |
| #if !defined(MBEDTLS_DEPRECATED_REMOVED) |
| unsigned char group_list_heap_allocated; |
| unsigned char sig_algs_heap_allocated; |
| #endif |
| |
| #if defined(MBEDTLS_SSL_ECP_RESTARTABLE_ENABLED) |
| uint8_t ecrs_enabled; /*!< Handshake supports EC restart? */ |
| enum { /* this complements ssl->state with info on intra-state operations */ |
| ssl_ecrs_none = 0, /*!< nothing going on (yet) */ |
| ssl_ecrs_crt_verify, /*!< Certificate: crt_verify() */ |
| ssl_ecrs_ske_start_processing, /*!< ServerKeyExchange: pk_verify() */ |
| ssl_ecrs_cke_ecdh_calc_secret, /*!< ClientKeyExchange: ECDH step 2 */ |
| ssl_ecrs_crt_vrfy_sign, /*!< CertificateVerify: pk_sign() */ |
| } ecrs_state; /*!< current (or last) operation */ |
| mbedtls_x509_crt *ecrs_peer_cert; /*!< The peer's CRT chain. */ |
| size_t ecrs_n; /*!< place for saving a length */ |
| #endif |
| |
| size_t pmslen; /*!< premaster length */ |
| |
| mbedtls_ssl_ciphersuite_t const *ciphersuite_info; |
| |
| void (*update_checksum)(mbedtls_ssl_context *, const unsigned char *, size_t); |
| void (*calc_verify)(const mbedtls_ssl_context *, unsigned char *, size_t *); |
| void (*calc_finished)(mbedtls_ssl_context *, unsigned char *, int); |
| mbedtls_ssl_tls_prf_cb *tls_prf; |
| |
| /* |
| * Handshake specific crypto variables |
| */ |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_3) |
| int tls13_kex_modes; /*!< key exchange modes for TLS 1.3 */ |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_3 */ |
| |
| #if defined(MBEDTLS_SSL_CLI_C) |
| /** Number of Hello Retry Request messages received from the server. */ |
| int hello_retry_request_count; |
| #endif /* MBEDTLS_SSL_CLI_C */ |
| |
| #if defined(MBEDTLS_SSL_SRV_C) |
| /** selected_group of key_share extension in HelloRetryRequest message. */ |
| uint16_t hrr_selected_group; |
| #endif /* MBEDTLS_SSL_SRV_C */ |
| |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_2) && \ |
| defined(MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED) |
| mbedtls_ssl_sig_hash_set_t hash_algs; /*!< Set of suitable sig-hash pairs */ |
| #endif |
| |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_3) && \ |
| defined(MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED) |
| uint16_t received_sig_algs[MBEDTLS_RECEIVED_SIG_ALGS_SIZE]; |
| #endif |
| |
| #if !defined(MBEDTLS_DEPRECATED_REMOVED) |
| const uint16_t *group_list; |
| const uint16_t *sig_algs; |
| #endif |
| |
| #if defined(MBEDTLS_DHM_C) |
| mbedtls_dhm_context dhm_ctx; /*!< DHM key exchange */ |
| #endif |
| |
| /* Adding guard for MBEDTLS_ECDSA_C to ensure no compile errors due |
| * to guards in client and server code. There is a gap in functionality that |
| * access to ecdh_ctx structure is needed for MBEDTLS_ECDSA_C which does not |
| * seem correct. |
| */ |
| #if defined(MBEDTLS_ECDH_C) || defined(MBEDTLS_ECDSA_C) |
| #if !defined(MBEDTLS_USE_PSA_CRYPTO) |
| mbedtls_ecdh_context ecdh_ctx; /*!< ECDH key exchange */ |
| #endif /* !MBEDTLS_USE_PSA_CRYPTO */ |
| |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) || defined(MBEDTLS_SSL_PROTO_TLS1_3) |
| psa_key_type_t ecdh_psa_type; |
| size_t ecdh_bits; |
| mbedtls_svc_key_id_t ecdh_psa_privkey; |
| uint8_t ecdh_psa_privkey_is_external; |
| unsigned char ecdh_psa_peerkey[MBEDTLS_PSA_MAX_EC_PUBKEY_LENGTH]; |
| size_t ecdh_psa_peerkey_len; |
| #endif /* MBEDTLS_USE_PSA_CRYPTO || MBEDTLS_SSL_PROTO_TLS1_3 */ |
| #endif /* MBEDTLS_ECDH_C || MBEDTLS_ECDSA_C */ |
| |
| #if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED) |
| mbedtls_ecjpake_context ecjpake_ctx; /*!< EC J-PAKE key exchange */ |
| #if defined(MBEDTLS_SSL_CLI_C) |
| unsigned char *ecjpake_cache; /*!< Cache for ClientHello ext */ |
| size_t ecjpake_cache_len; /*!< Length of cached data */ |
| #endif |
| #endif /* MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */ |
| |
| #if defined(MBEDTLS_ECDH_C) || defined(MBEDTLS_ECDSA_C) || \ |
| defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED) |
| const mbedtls_ecp_curve_info **curves; /*!< Supported elliptic curves */ |
| #endif |
| |
| #if defined(MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED) |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) |
| mbedtls_svc_key_id_t psk_opaque; /*!< Opaque PSK from the callback */ |
| #endif /* MBEDTLS_USE_PSA_CRYPTO */ |
| unsigned char *psk; /*!< PSK from the callback */ |
| size_t psk_len; /*!< Length of PSK from callback */ |
| #endif /* MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED */ |
| |
| #if defined(MBEDTLS_SSL_ECP_RESTARTABLE_ENABLED) |
| mbedtls_x509_crt_restart_ctx ecrs_ctx; /*!< restart context */ |
| #endif |
| |
| #if defined(MBEDTLS_X509_CRT_PARSE_C) |
| mbedtls_ssl_key_cert *key_cert; /*!< chosen key/cert pair (server) */ |
| #if defined(MBEDTLS_SSL_SERVER_NAME_INDICATION) |
| mbedtls_ssl_key_cert *sni_key_cert; /*!< key/cert list from SNI */ |
| mbedtls_x509_crt *sni_ca_chain; /*!< trusted CAs from SNI callback */ |
| mbedtls_x509_crl *sni_ca_crl; /*!< trusted CAs CRLs from SNI */ |
| #endif /* MBEDTLS_SSL_SERVER_NAME_INDICATION */ |
| #endif /* MBEDTLS_X509_CRT_PARSE_C */ |
| |
| #if defined(MBEDTLS_X509_CRT_PARSE_C) && \ |
| !defined(MBEDTLS_SSL_KEEP_PEER_CERTIFICATE) |
| mbedtls_pk_context peer_pubkey; /*!< The public key from the peer. */ |
| #endif /* MBEDTLS_X509_CRT_PARSE_C && !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE */ |
| |
| struct |
| { |
| size_t total_bytes_buffered; /*!< Cumulative size of heap allocated |
| * buffers used for message buffering. */ |
| |
| uint8_t seen_ccs; /*!< Indicates if a CCS message has |
| * been seen in the current flight. */ |
| |
| struct mbedtls_ssl_hs_buffer |
| { |
| unsigned is_valid : 1; |
| unsigned is_fragmented : 1; |
| unsigned is_complete : 1; |
| unsigned char *data; |
| size_t data_len; |
| } hs[MBEDTLS_SSL_MAX_BUFFERED_HS]; |
| |
| struct |
| { |
| unsigned char *data; |
| size_t len; |
| unsigned epoch; |
| } future_record; |
| |
| } buffering; |
| |
| #if defined(MBEDTLS_SSL_CLI_C) && \ |
| ( defined(MBEDTLS_SSL_PROTO_DTLS) || defined(MBEDTLS_SSL_PROTO_TLS1_3) ) |
| unsigned char *cookie; /*!< HelloVerifyRequest cookie for DTLS |
| * HelloRetryRequest cookie for TLS 1.3 */ |
| #endif /* MBEDTLS_SSL_CLI_C && |
| ( MBEDTLS_SSL_PROTO_DTLS || MBEDTLS_SSL_PROTO_TLS1_3 ) */ |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) |
| unsigned char verify_cookie_len; /*!< Cli: HelloVerifyRequest cookie |
| * length |
| * Srv: flag for sending a cookie */ |
| #endif /* MBEDTLS_SSL_PROTO_DTLS */ |
| #if defined(MBEDTLS_SSL_CLI_C) && defined(MBEDTLS_SSL_PROTO_TLS1_3) |
| uint16_t hrr_cookie_len; /*!< HelloRetryRequest cookie length */ |
| #endif /* MBEDTLS_SSL_CLI_C && MBEDTLS_SSL_PROTO_TLS1_3 */ |
| |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) |
| unsigned int out_msg_seq; /*!< Outgoing handshake sequence number */ |
| unsigned int in_msg_seq; /*!< Incoming handshake sequence number */ |
| |
| uint32_t retransmit_timeout; /*!< Current value of timeout */ |
| mbedtls_ssl_flight_item *flight; /*!< Current outgoing flight */ |
| mbedtls_ssl_flight_item *cur_msg; /*!< Current message in flight */ |
| unsigned char *cur_msg_p; /*!< Position in current message */ |
| unsigned int in_flight_start_seq; /*!< Minimum message sequence in the |
| flight being received */ |
| mbedtls_ssl_transform *alt_transform_out; /*!< Alternative transform for |
| resending messages */ |
| unsigned char alt_out_ctr[MBEDTLS_SSL_SEQUENCE_NUMBER_LEN]; /*!< Alternative record epoch/counter |
| for resending messages */ |
| |
| #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) |
| /* The state of CID configuration in this handshake. */ |
| |
| uint8_t cid_in_use; /*!< This indicates whether the use of the CID extension |
| * has been negotiated. Possible values are |
| * #MBEDTLS_SSL_CID_ENABLED and |
| * #MBEDTLS_SSL_CID_DISABLED. */ |
| unsigned char peer_cid[ MBEDTLS_SSL_CID_OUT_LEN_MAX ]; /*! The peer's CID */ |
| uint8_t peer_cid_len; /*!< The length of |
| * \c peer_cid. */ |
| #endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ |
| |
| uint16_t mtu; /*!< Handshake mtu, used to fragment outgoing messages */ |
| #endif /* MBEDTLS_SSL_PROTO_DTLS */ |
| |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_3) |
| /*! TLS 1.3 transforms for 0-RTT and encrypted handshake messages. |
| * Those pointers own the transforms they reference. */ |
| mbedtls_ssl_transform *transform_handshake; |
| mbedtls_ssl_transform *transform_earlydata; |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_3 */ |
| |
| /* |
| * Checksum contexts |
| */ |
| #if defined(MBEDTLS_SHA256_C) |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) |
| psa_hash_operation_t fin_sha256_psa; |
| #else |
| mbedtls_sha256_context fin_sha256; |
| #endif |
| #endif |
| #if defined(MBEDTLS_SHA384_C) |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) |
| psa_hash_operation_t fin_sha384_psa; |
| #else |
| mbedtls_sha512_context fin_sha512; |
| #endif |
| #endif |
| |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_3) |
| uint16_t offered_group_id; /* The NamedGroup value for the group |
| * that is being used for ephemeral |
| * key exchange. |
| * |
| * On the client: Defaults to the first |
| * entry in the client's group list, |
| * but can be overwritten by the HRR. */ |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_3 */ |
| |
| #if defined(MBEDTLS_SSL_CLI_C) |
| uint8_t client_auth; /*!< used to check if CertificateRequest has been |
| received from server side. If CertificateRequest |
| has been received, Certificate and CertificateVerify |
| should be sent to server */ |
| #endif /* MBEDTLS_SSL_CLI_C */ |
| /* |
| * State-local variables used during the processing |
| * of a specific handshake state. |
| */ |
| union |
| { |
| /* Outgoing Finished message */ |
| struct |
| { |
| uint8_t preparation_done; |
| |
| /* Buffer holding digest of the handshake up to |
| * but excluding the outgoing finished message. */ |
| unsigned char digest[MBEDTLS_TLS1_3_MD_MAX_SIZE]; |
| size_t digest_len; |
| } finished_out; |
| |
| /* Incoming Finished message */ |
| struct |
| { |
| uint8_t preparation_done; |
| |
| /* Buffer holding digest of the handshake up to but |
| * excluding the peer's incoming finished message. */ |
| unsigned char digest[MBEDTLS_TLS1_3_MD_MAX_SIZE]; |
| size_t digest_len; |
| } finished_in; |
| |
| } state_local; |
| |
| /* End of state-local variables. */ |
| |
| unsigned char randbytes[MBEDTLS_CLIENT_HELLO_RANDOM_LEN + |
| MBEDTLS_SERVER_HELLO_RANDOM_LEN]; |
| /*!< random bytes */ |
| unsigned char premaster[MBEDTLS_PREMASTER_SIZE]; |
| /*!< premaster secret */ |
| |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_3) |
| int extensions_present; /*!< extension presence; Each bitfield |
| represents an extension and defined |
| as \c MBEDTLS_SSL_EXT_XXX */ |
| |
| #if defined(MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED) |
| unsigned char certificate_request_context_len; |
| unsigned char *certificate_request_context; |
| #endif |
| |
| union |
| { |
| unsigned char early [MBEDTLS_TLS1_3_MD_MAX_SIZE]; |
| unsigned char handshake[MBEDTLS_TLS1_3_MD_MAX_SIZE]; |
| unsigned char app [MBEDTLS_TLS1_3_MD_MAX_SIZE]; |
| } tls13_master_secrets; |
| |
| mbedtls_ssl_tls13_handshake_secrets tls13_hs_secrets; |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_3 */ |
| |
| #if defined(MBEDTLS_SSL_ASYNC_PRIVATE) |
| /** Asynchronous operation context. This field is meant for use by the |
| * asynchronous operation callbacks (mbedtls_ssl_config::f_async_sign_start, |
| * mbedtls_ssl_config::f_async_decrypt_start, |
| * mbedtls_ssl_config::f_async_resume, mbedtls_ssl_config::f_async_cancel). |
| * The library does not use it internally. */ |
| void *user_async_ctx; |
| #endif /* MBEDTLS_SSL_ASYNC_PRIVATE */ |
| |
| #if defined(MBEDTLS_SSL_SERVER_NAME_INDICATION) |
| const unsigned char *sni_name; /*!< raw SNI */ |
| size_t sni_name_len; /*!< raw SNI len */ |
| #endif /* MBEDTLS_SSL_SERVER_NAME_INDICATION */ |
| }; |
| |
| typedef struct mbedtls_ssl_hs_buffer mbedtls_ssl_hs_buffer; |
| |
| /* |
| * Representation of decryption/encryption transformations on records |
| * |
| * There are the following general types of record transformations: |
| * - Stream transformations (TLS versions == 1.2 only) |
| * Transformation adding a MAC and applying a stream-cipher |
| * to the authenticated message. |
| * - CBC block cipher transformations ([D]TLS versions == 1.2 only) |
| * For TLS 1.2, no IV is generated at key extraction time, but every |
| * encrypted record is explicitly prefixed by the IV with which it was |
| * encrypted. |
| * - AEAD transformations ([D]TLS versions == 1.2 only) |
| * These come in two fundamentally different versions, the first one |
| * used in TLS 1.2, excluding ChaChaPoly ciphersuites, and the second |
| * one used for ChaChaPoly ciphersuites in TLS 1.2 as well as for TLS 1.3. |
| * In the first transformation, the IV to be used for a record is obtained |
| * as the concatenation of an explicit, static 4-byte IV and the 8-byte |
| * record sequence number, and explicitly prepending this sequence number |
| * to the encrypted record. In contrast, in the second transformation |
| * the IV is obtained by XOR'ing a static IV obtained at key extraction |
| * time with the 8-byte record sequence number, without prepending the |
| * latter to the encrypted record. |
| * |
| * Additionally, DTLS 1.2 + CID as well as TLS 1.3 use an inner plaintext |
| * which allows to add flexible length padding and to hide a record's true |
| * content type. |
| * |
| * In addition to type and version, the following parameters are relevant: |
| * - The symmetric cipher algorithm to be used. |
| * - The (static) encryption/decryption keys for the cipher. |
| * - For stream/CBC, the type of message digest to be used. |
| * - For stream/CBC, (static) encryption/decryption keys for the digest. |
| * - For AEAD transformations, the size (potentially 0) of an explicit, |
| * random initialization vector placed in encrypted records. |
| * - For some transformations (currently AEAD) an implicit IV. It is static |
| * and (if present) is combined with the explicit IV in a transformation- |
| * -dependent way (e.g. appending in TLS 1.2 and XOR'ing in TLS 1.3). |
| * - For stream/CBC, a flag determining the order of encryption and MAC. |
| * - The details of the transformation depend on the SSL/TLS version. |
| * - The length of the authentication tag. |
| * |
| * The struct below refines this abstract view as follows: |
| * - The cipher underlying the transformation is managed in |
| * cipher contexts cipher_ctx_{enc/dec}, which must have the |
| * same cipher type. The mode of these cipher contexts determines |
| * the type of the transformation in the sense above: e.g., if |
| * the type is MBEDTLS_CIPHER_AES_256_CBC resp. MBEDTLS_CIPHER_AES_192_GCM |
| * then the transformation has type CBC resp. AEAD. |
| * - The cipher keys are never stored explicitly but |
| * are maintained within cipher_ctx_{enc/dec}. |
| * - For stream/CBC transformations, the message digest contexts |
| * used for the MAC's are stored in md_ctx_{enc/dec}. These contexts |
| * are unused for AEAD transformations. |
| * - For stream/CBC transformations, the MAC keys are not stored explicitly |
| * but maintained within md_ctx_{enc/dec}. |
| * - The mac_enc and mac_dec fields are unused for EAD transformations. |
| * - For transformations using an implicit IV maintained within |
| * the transformation context, its contents are stored within |
| * iv_{enc/dec}. |
| * - The value of ivlen indicates the length of the IV. |
| * This is redundant in case of stream/CBC transformations |
| * which always use 0 resp. the cipher's block length as the |
| * IV length, but is needed for AEAD ciphers and may be |
| * different from the underlying cipher's block length |
| * in this case. |
| * - The field fixed_ivlen is nonzero for AEAD transformations only |
| * and indicates the length of the static part of the IV which is |
| * constant throughout the communication, and which is stored in |
| * the first fixed_ivlen bytes of the iv_{enc/dec} arrays. |
| * - tls_version denotes the 2-byte TLS version |
| * - For stream/CBC transformations, maclen denotes the length of the |
| * authentication tag, while taglen is unused and 0. |
| * - For AEAD transformations, taglen denotes the length of the |
| * authentication tag, while maclen is unused and 0. |
| * - For CBC transformations, encrypt_then_mac determines the |
| * order of encryption and authentication. This field is unused |
| * in other transformations. |
| * |
| */ |
| struct mbedtls_ssl_transform |
| { |
| /* |
| * Session specific crypto layer |
| */ |
| size_t minlen; /*!< min. ciphertext length */ |
| size_t ivlen; /*!< IV length */ |
| size_t fixed_ivlen; /*!< Fixed part of IV (AEAD) */ |
| size_t maclen; /*!< MAC(CBC) len */ |
| size_t taglen; /*!< TAG(AEAD) len */ |
| |
| unsigned char iv_enc[16]; /*!< IV (encryption) */ |
| unsigned char iv_dec[16]; /*!< IV (decryption) */ |
| |
| #if defined(MBEDTLS_SSL_SOME_SUITES_USE_MAC) |
| |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) |
| mbedtls_svc_key_id_t psa_mac_enc; /*!< MAC (encryption) */ |
| mbedtls_svc_key_id_t psa_mac_dec; /*!< MAC (decryption) */ |
| psa_algorithm_t psa_mac_alg; /*!< psa MAC algorithm */ |
| #else |
| mbedtls_md_context_t md_ctx_enc; /*!< MAC (encryption) */ |
| mbedtls_md_context_t md_ctx_dec; /*!< MAC (decryption) */ |
| #endif /* MBEDTLS_USE_PSA_CRYPTO */ |
| |
| #if defined(MBEDTLS_SSL_ENCRYPT_THEN_MAC) |
| int encrypt_then_mac; /*!< flag for EtM activation */ |
| #endif |
| |
| #endif /* MBEDTLS_SSL_SOME_SUITES_USE_MAC */ |
| |
| mbedtls_ssl_protocol_version tls_version; |
| |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) |
| mbedtls_svc_key_id_t psa_key_enc; /*!< psa encryption key */ |
| mbedtls_svc_key_id_t psa_key_dec; /*!< psa decryption key */ |
| psa_algorithm_t psa_alg; /*!< psa algorithm */ |
| #else |
| mbedtls_cipher_context_t cipher_ctx_enc; /*!< encryption context */ |
| mbedtls_cipher_context_t cipher_ctx_dec; /*!< decryption context */ |
| #endif /* MBEDTLS_USE_PSA_CRYPTO */ |
| |
| #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) |
| uint8_t in_cid_len; |
| uint8_t out_cid_len; |
| unsigned char in_cid [ MBEDTLS_SSL_CID_OUT_LEN_MAX ]; |
| unsigned char out_cid[ MBEDTLS_SSL_CID_OUT_LEN_MAX ]; |
| #endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ |
| |
| #if defined(MBEDTLS_SSL_CONTEXT_SERIALIZATION) |
| /* We need the Hello random bytes in order to re-derive keys from the |
| * Master Secret and other session info, |
| * see ssl_tls12_populate_transform() */ |
| unsigned char randbytes[MBEDTLS_SERVER_HELLO_RANDOM_LEN + |
| MBEDTLS_CLIENT_HELLO_RANDOM_LEN]; |
| /*!< ServerHello.random+ClientHello.random */ |
| #endif /* MBEDTLS_SSL_CONTEXT_SERIALIZATION */ |
| }; |
| |
| /* |
| * Return 1 if the transform uses an AEAD cipher, 0 otherwise. |
| * Equivalently, return 0 if a separate MAC is used, 1 otherwise. |
| */ |
| static inline int mbedtls_ssl_transform_uses_aead( |
| const mbedtls_ssl_transform *transform ) |
| { |
| #if defined(MBEDTLS_SSL_SOME_SUITES_USE_MAC) |
| return( transform->maclen == 0 && transform->taglen != 0 ); |
| #else |
| (void) transform; |
| return( 1 ); |
| #endif |
| } |
| |
| /* |
| * Internal representation of record frames |
| * |
| * Instances come in two flavors: |
| * (1) Encrypted |
| * These always have data_offset = 0 |
| * (2) Unencrypted |
| * These have data_offset set to the amount of |
| * pre-expansion during record protection. Concretely, |
| * this is the length of the fixed part of the explicit IV |
| * used for encryption, or 0 if no explicit IV is used |
| * (e.g. for stream ciphers). |
| * |
| * The reason for the data_offset in the unencrypted case |
| * is to allow for in-place conversion of an unencrypted to |
| * an encrypted record. If the offset wasn't included, the |
| * encrypted content would need to be shifted afterwards to |
| * make space for the fixed IV. |
| * |
| */ |
| #if MBEDTLS_SSL_CID_OUT_LEN_MAX > MBEDTLS_SSL_CID_IN_LEN_MAX |
| #define MBEDTLS_SSL_CID_LEN_MAX MBEDTLS_SSL_CID_OUT_LEN_MAX |
| #else |
| #define MBEDTLS_SSL_CID_LEN_MAX MBEDTLS_SSL_CID_IN_LEN_MAX |
| #endif |
| |
| typedef struct |
| { |
| uint8_t ctr[MBEDTLS_SSL_SEQUENCE_NUMBER_LEN]; /* In TLS: The implicit record sequence number. |
| * In DTLS: The 2-byte epoch followed by |
| * the 6-byte sequence number. |
| * This is stored as a raw big endian byte array |
| * as opposed to a uint64_t because we rarely |
| * need to perform arithmetic on this, but do |
| * need it as a Byte array for the purpose of |
| * MAC computations. */ |
| uint8_t type; /* The record content type. */ |
| uint8_t ver[2]; /* SSL/TLS version as present on the wire. |
| * Convert to internal presentation of versions |
| * using mbedtls_ssl_read_version() and |
| * mbedtls_ssl_write_version(). |
| * Keep wire-format for MAC computations. */ |
| |
| unsigned char *buf; /* Memory buffer enclosing the record content */ |
| size_t buf_len; /* Buffer length */ |
| size_t data_offset; /* Offset of record content */ |
| size_t data_len; /* Length of record content */ |
| |
| #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) |
| uint8_t cid_len; /* Length of the CID (0 if not present) */ |
| unsigned char cid[ MBEDTLS_SSL_CID_LEN_MAX ]; /* The CID */ |
| #endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ |
| } mbedtls_record; |
| |
| #if defined(MBEDTLS_X509_CRT_PARSE_C) |
| /* |
| * List of certificate + private key pairs |
| */ |
| struct mbedtls_ssl_key_cert |
| { |
| mbedtls_x509_crt *cert; /*!< cert */ |
| mbedtls_pk_context *key; /*!< private key */ |
| mbedtls_ssl_key_cert *next; /*!< next key/cert pair */ |
| }; |
| #endif /* MBEDTLS_X509_CRT_PARSE_C */ |
| |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) |
| /* |
| * List of handshake messages kept around for resending |
| */ |
| struct mbedtls_ssl_flight_item |
| { |
| unsigned char *p; /*!< message, including handshake headers */ |
| size_t len; /*!< length of p */ |
| unsigned char type; /*!< type of the message: handshake or CCS */ |
| mbedtls_ssl_flight_item *next; /*!< next handshake message(s) */ |
| }; |
| #endif /* MBEDTLS_SSL_PROTO_DTLS */ |
| |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_2) |
| /** |
| * \brief Given an SSL context and its associated configuration, write the TLS |
| * 1.2 specific extensions of the ClientHello message. |
| * |
| * \param[in] ssl SSL context |
| * \param[in] buf Base address of the buffer where to write the extensions |
| * \param[in] end End address of the buffer where to write the extensions |
| * \param uses_ec Whether one proposed ciphersuite uses an elliptic curve |
| * (<> 0) or not ( 0 ). |
| * \param[out] out_len Length of the data written into the buffer \p buf |
| */ |
| int mbedtls_ssl_tls12_write_client_hello_exts( mbedtls_ssl_context *ssl, |
| unsigned char *buf, |
| const unsigned char *end, |
| int uses_ec, |
| size_t *out_len ); |
| #endif |
| |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_2) && \ |
| defined(MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED) |
| |
| /* Find an entry in a signature-hash set matching a given hash algorithm. */ |
| mbedtls_md_type_t mbedtls_ssl_sig_hash_set_find( mbedtls_ssl_sig_hash_set_t *set, |
| mbedtls_pk_type_t sig_alg ); |
| /* Add a signature-hash-pair to a signature-hash set */ |
| void mbedtls_ssl_sig_hash_set_add( mbedtls_ssl_sig_hash_set_t *set, |
| mbedtls_pk_type_t sig_alg, |
| mbedtls_md_type_t md_alg ); |
| /* Allow exactly one hash algorithm for each signature. */ |
| void mbedtls_ssl_sig_hash_set_const_hash( mbedtls_ssl_sig_hash_set_t *set, |
| mbedtls_md_type_t md_alg ); |
| |
| /* Setup an empty signature-hash set */ |
| static inline void mbedtls_ssl_sig_hash_set_init( mbedtls_ssl_sig_hash_set_t *set ) |
| { |
| mbedtls_ssl_sig_hash_set_const_hash( set, MBEDTLS_MD_NONE ); |
| } |
| |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_2) && |
| MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED */ |
| |
| /** |
| * \brief Free referenced items in an SSL transform context and clear |
| * memory |
| * |
| * \param transform SSL transform context |
| */ |
| void mbedtls_ssl_transform_free( mbedtls_ssl_transform *transform ); |
| |
| /** |
| * \brief Free referenced items in an SSL handshake context and clear |
| * memory |
| * |
| * \param ssl SSL context |
| */ |
| void mbedtls_ssl_handshake_free( mbedtls_ssl_context *ssl ); |
| |
| /* set inbound transform of ssl context */ |
| void mbedtls_ssl_set_inbound_transform( mbedtls_ssl_context *ssl, |
| mbedtls_ssl_transform *transform ); |
| |
| /* set outbound transform of ssl context */ |
| void mbedtls_ssl_set_outbound_transform( mbedtls_ssl_context *ssl, |
| mbedtls_ssl_transform *transform ); |
| |
| int mbedtls_ssl_handshake_client_step( mbedtls_ssl_context *ssl ); |
| int mbedtls_ssl_handshake_server_step( mbedtls_ssl_context *ssl ); |
| void mbedtls_ssl_handshake_wrapup( mbedtls_ssl_context *ssl ); |
| static inline void mbedtls_ssl_handshake_set_state( mbedtls_ssl_context *ssl, |
| mbedtls_ssl_states state ) |
| { |
| ssl->state = ( int ) state; |
| } |
| |
| int mbedtls_ssl_send_fatal_handshake_failure( mbedtls_ssl_context *ssl ); |
| |
| void mbedtls_ssl_reset_checksum( mbedtls_ssl_context *ssl ); |
| |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_2) |
| int mbedtls_ssl_derive_keys( mbedtls_ssl_context *ssl ); |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_2 */ |
| |
| int mbedtls_ssl_handle_message_type( mbedtls_ssl_context *ssl ); |
| int mbedtls_ssl_prepare_handshake_record( mbedtls_ssl_context *ssl ); |
| void mbedtls_ssl_update_handshake_status( mbedtls_ssl_context *ssl ); |
| |
| /** |
| * \brief Update record layer |
| * |
| * This function roughly separates the implementation |
| * of the logic of (D)TLS from the implementation |
| * of the secure transport. |
| * |
| * \param ssl The SSL context to use. |
| * \param update_hs_digest This indicates if the handshake digest |
| * should be automatically updated in case |
| * a handshake message is found. |
| * |
| * \return 0 or non-zero error code. |
| * |
| * \note A clarification on what is called 'record layer' here |
| * is in order, as many sensible definitions are possible: |
| * |
| * The record layer takes as input an untrusted underlying |
| * transport (stream or datagram) and transforms it into |
| * a serially multiplexed, secure transport, which |
| * conceptually provides the following: |
| * |
| * (1) Three datagram based, content-agnostic transports |
| * for handshake, alert and CCS messages. |
| * (2) One stream- or datagram-based transport |
| * for application data. |
| * (3) Functionality for changing the underlying transform |
| * securing the contents. |
| * |
| * The interface to this functionality is given as follows: |
| * |
| * a Updating |
| * [Currently implemented by mbedtls_ssl_read_record] |
| * |
| * Check if and on which of the four 'ports' data is pending: |
| * Nothing, a controlling datagram of type (1), or application |
| * data (2). In any case data is present, internal buffers |
| * provide access to the data for the user to process it. |
| * Consumption of type (1) datagrams is done automatically |
| * on the next update, invalidating that the internal buffers |
| * for previous datagrams, while consumption of application |
| * data (2) is user-controlled. |
| * |
| * b Reading of application data |
| * [Currently manual adaption of ssl->in_offt pointer] |
| * |
| * As mentioned in the last paragraph, consumption of data |
| * is different from the automatic consumption of control |
| * datagrams (1) because application data is treated as a stream. |
| * |
| * c Tracking availability of application data |
| * [Currently manually through decreasing ssl->in_msglen] |
| * |
| * For efficiency and to retain datagram semantics for |
| * application data in case of DTLS, the record layer |
| * provides functionality for checking how much application |
| * data is still available in the internal buffer. |
| * |
| * d Changing the transformation securing the communication. |
| * |
| * Given an opaque implementation of the record layer in the |
| * above sense, it should be possible to implement the logic |
| * of (D)TLS on top of it without the need to know anything |
| * about the record layer's internals. This is done e.g. |
| * in all the handshake handling functions, and in the |
| * application data reading function mbedtls_ssl_read. |
| * |
| * \note The above tries to give a conceptual picture of the |
| * record layer, but the current implementation deviates |
| * from it in some places. For example, our implementation of |
| * the update functionality through mbedtls_ssl_read_record |
| * discards datagrams depending on the current state, which |
| * wouldn't fall under the record layer's responsibility |
| * following the above definition. |
| * |
| */ |
| int mbedtls_ssl_read_record( mbedtls_ssl_context *ssl, |
| unsigned update_hs_digest ); |
| int mbedtls_ssl_fetch_input( mbedtls_ssl_context *ssl, size_t nb_want ); |
| |
| /* |
| * Write handshake message header |
| */ |
| int mbedtls_ssl_start_handshake_msg( mbedtls_ssl_context *ssl, unsigned hs_type, |
| unsigned char **buf, size_t *buf_len ); |
| |
| int mbedtls_ssl_write_handshake_msg_ext( mbedtls_ssl_context *ssl, |
| int update_checksum, |
| int force_flush ); |
| static inline int mbedtls_ssl_write_handshake_msg( mbedtls_ssl_context *ssl ) |
| { |
| return( mbedtls_ssl_write_handshake_msg_ext( ssl, 1 /* update checksum */, 1 /* force flush */ ) ); |
| } |
| |
| /* |
| * Write handshake message tail |
| */ |
| int mbedtls_ssl_finish_handshake_msg( mbedtls_ssl_context *ssl, |
| size_t buf_len, size_t msg_len ); |
| |
| int mbedtls_ssl_write_record( mbedtls_ssl_context *ssl, int force_flush ); |
| int mbedtls_ssl_flush_output( mbedtls_ssl_context *ssl ); |
| |
| int mbedtls_ssl_parse_certificate( mbedtls_ssl_context *ssl ); |
| int mbedtls_ssl_write_certificate( mbedtls_ssl_context *ssl ); |
| |
| int mbedtls_ssl_parse_change_cipher_spec( mbedtls_ssl_context *ssl ); |
| int mbedtls_ssl_write_change_cipher_spec( mbedtls_ssl_context *ssl ); |
| |
| int mbedtls_ssl_parse_finished( mbedtls_ssl_context *ssl ); |
| int mbedtls_ssl_write_finished( mbedtls_ssl_context *ssl ); |
| |
| void mbedtls_ssl_optimize_checksum( mbedtls_ssl_context *ssl, |
| const mbedtls_ssl_ciphersuite_t *ciphersuite_info ); |
| |
| /* |
| * Update checksum of handshake messages. |
| */ |
| void mbedtls_ssl_add_hs_msg_to_checksum( mbedtls_ssl_context *ssl, |
| unsigned hs_type, |
| unsigned char const *msg, |
| size_t msg_len ); |
| |
| #if defined(MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED) |
| int mbedtls_ssl_psk_derive_premaster( mbedtls_ssl_context *ssl, |
| mbedtls_key_exchange_type_t key_ex ); |
| #if defined(MBEDTLS_SSL_CLI_C) && defined(MBEDTLS_SSL_PROTO_TLS1_2) |
| int mbedtls_ssl_conf_has_static_psk( mbedtls_ssl_config const *conf ); |
| #endif |
| |
| /** |
| * Get the first defined PSK by order of precedence: |
| * 1. handshake PSK set by \c mbedtls_ssl_set_hs_psk() in the PSK callback |
| * 2. static PSK configured by \c mbedtls_ssl_conf_psk() |
| * Return a code and update the pair (PSK, PSK length) passed to this function |
| */ |
| static inline int mbedtls_ssl_get_psk( const mbedtls_ssl_context *ssl, |
| const unsigned char **psk, size_t *psk_len ) |
| { |
| if( ssl->handshake->psk != NULL && ssl->handshake->psk_len > 0 ) |
| { |
| *psk = ssl->handshake->psk; |
| *psk_len = ssl->handshake->psk_len; |
| } |
| |
| else if( ssl->conf->psk != NULL && ssl->conf->psk_len > 0 ) |
| { |
| *psk = ssl->conf->psk; |
| *psk_len = ssl->conf->psk_len; |
| } |
| |
| else |
| { |
| *psk = NULL; |
| *psk_len = 0; |
| return( MBEDTLS_ERR_SSL_PRIVATE_KEY_REQUIRED ); |
| } |
| |
| return( 0 ); |
| } |
| |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) |
| /** |
| * Get the first defined opaque PSK by order of precedence: |
| * 1. handshake PSK set by \c mbedtls_ssl_set_hs_psk_opaque() in the PSK |
| * callback |
| * 2. static PSK configured by \c mbedtls_ssl_conf_psk_opaque() |
| * Return an opaque PSK |
| */ |
| static inline mbedtls_svc_key_id_t mbedtls_ssl_get_opaque_psk( |
| const mbedtls_ssl_context *ssl ) |
| { |
| if( ! mbedtls_svc_key_id_is_null( ssl->handshake->psk_opaque ) ) |
| return( ssl->handshake->psk_opaque ); |
| |
| if( ! mbedtls_svc_key_id_is_null( ssl->conf->psk_opaque ) ) |
| return( ssl->conf->psk_opaque ); |
| |
| return( MBEDTLS_SVC_KEY_ID_INIT ); |
| } |
| |
| #endif /* MBEDTLS_USE_PSA_CRYPTO */ |
| |
| #endif /* MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED */ |
| |
| #if defined(MBEDTLS_PK_C) |
| unsigned char mbedtls_ssl_sig_from_pk( mbedtls_pk_context *pk ); |
| unsigned char mbedtls_ssl_sig_from_pk_alg( mbedtls_pk_type_t type ); |
| mbedtls_pk_type_t mbedtls_ssl_pk_alg_from_sig( unsigned char sig ); |
| #endif |
| |
| mbedtls_md_type_t mbedtls_ssl_md_alg_from_hash( unsigned char hash ); |
| unsigned char mbedtls_ssl_hash_from_md_alg( int md ); |
| |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_2) |
| int mbedtls_ssl_set_calc_verify_md( mbedtls_ssl_context *ssl, int md ); |
| #endif |
| |
| int mbedtls_ssl_check_curve_tls_id( const mbedtls_ssl_context *ssl, uint16_t tls_id ); |
| #if defined(MBEDTLS_ECP_C) |
| int mbedtls_ssl_check_curve( const mbedtls_ssl_context *ssl, mbedtls_ecp_group_id grp_id ); |
| #endif |
| |
| #if defined(MBEDTLS_SSL_DTLS_SRTP) |
| static inline mbedtls_ssl_srtp_profile mbedtls_ssl_check_srtp_profile_value |
| ( const uint16_t srtp_profile_value ) |
| { |
| switch( srtp_profile_value ) |
| { |
| case MBEDTLS_TLS_SRTP_AES128_CM_HMAC_SHA1_80: |
| case MBEDTLS_TLS_SRTP_AES128_CM_HMAC_SHA1_32: |
| case MBEDTLS_TLS_SRTP_NULL_HMAC_SHA1_80: |
| case MBEDTLS_TLS_SRTP_NULL_HMAC_SHA1_32: |
| return srtp_profile_value; |
| default: break; |
| } |
| return( MBEDTLS_TLS_SRTP_UNSET ); |
| } |
| #endif |
| |
| #if defined(MBEDTLS_X509_CRT_PARSE_C) |
| static inline mbedtls_pk_context *mbedtls_ssl_own_key( mbedtls_ssl_context *ssl ) |
| { |
| mbedtls_ssl_key_cert *key_cert; |
| |
| if( ssl->handshake != NULL && ssl->handshake->key_cert != NULL ) |
| key_cert = ssl->handshake->key_cert; |
| else |
| key_cert = ssl->conf->key_cert; |
| |
| return( key_cert == NULL ? NULL : key_cert->key ); |
| } |
| |
| static inline mbedtls_x509_crt *mbedtls_ssl_own_cert( mbedtls_ssl_context *ssl ) |
| { |
| mbedtls_ssl_key_cert *key_cert; |
| |
| if( ssl->handshake != NULL && ssl->handshake->key_cert != NULL ) |
| key_cert = ssl->handshake->key_cert; |
| else |
| key_cert = ssl->conf->key_cert; |
| |
| return( key_cert == NULL ? NULL : key_cert->cert ); |
| } |
| |
| /* |
| * Check usage of a certificate wrt extensions: |
| * keyUsage, extendedKeyUsage (later), and nSCertType (later). |
| * |
| * Warning: cert_endpoint is the endpoint of the cert (ie, of our peer when we |
| * check a cert we received from them)! |
| * |
| * Return 0 if everything is OK, -1 if not. |
| */ |
| int mbedtls_ssl_check_cert_usage( const mbedtls_x509_crt *cert, |
| const mbedtls_ssl_ciphersuite_t *ciphersuite, |
| int cert_endpoint, |
| uint32_t *flags ); |
| #endif /* MBEDTLS_X509_CRT_PARSE_C */ |
| |
| void mbedtls_ssl_write_version( unsigned char version[2], int transport, |
| mbedtls_ssl_protocol_version tls_version ); |
| uint16_t mbedtls_ssl_read_version( const unsigned char version[2], |
| int transport ); |
| |
| static inline size_t mbedtls_ssl_in_hdr_len( const mbedtls_ssl_context *ssl ) |
| { |
| #if !defined(MBEDTLS_SSL_PROTO_DTLS) |
| ((void) ssl); |
| #endif |
| |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) |
| if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM ) |
| { |
| return( 13 ); |
| } |
| else |
| #endif /* MBEDTLS_SSL_PROTO_DTLS */ |
| { |
| return( 5 ); |
| } |
| } |
| |
| static inline size_t mbedtls_ssl_out_hdr_len( const mbedtls_ssl_context *ssl ) |
| { |
| return( (size_t) ( ssl->out_iv - ssl->out_hdr ) ); |
| } |
| |
| static inline size_t mbedtls_ssl_hs_hdr_len( const mbedtls_ssl_context *ssl ) |
| { |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) |
| if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM ) |
| return( 12 ); |
| #else |
| ((void) ssl); |
| #endif |
| return( 4 ); |
| } |
| |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) |
| void mbedtls_ssl_send_flight_completed( mbedtls_ssl_context *ssl ); |
| void mbedtls_ssl_recv_flight_completed( mbedtls_ssl_context *ssl ); |
| int mbedtls_ssl_resend( mbedtls_ssl_context *ssl ); |
| int mbedtls_ssl_flight_transmit( mbedtls_ssl_context *ssl ); |
| #endif |
| |
| /* Visible for testing purposes only */ |
| #if defined(MBEDTLS_SSL_DTLS_ANTI_REPLAY) |
| int mbedtls_ssl_dtls_replay_check( mbedtls_ssl_context const *ssl ); |
| void mbedtls_ssl_dtls_replay_update( mbedtls_ssl_context *ssl ); |
| #endif |
| |
| int mbedtls_ssl_session_copy( mbedtls_ssl_session *dst, |
| const mbedtls_ssl_session *src ); |
| |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_2) |
| /* The hash buffer must have at least MBEDTLS_MD_MAX_SIZE bytes of length. */ |
| int mbedtls_ssl_get_key_exchange_md_tls1_2( mbedtls_ssl_context *ssl, |
| unsigned char *hash, size_t *hashlen, |
| unsigned char *data, size_t data_len, |
| mbedtls_md_type_t md_alg ); |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_2 */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| void mbedtls_ssl_transform_init( mbedtls_ssl_transform *transform ); |
| int mbedtls_ssl_encrypt_buf( mbedtls_ssl_context *ssl, |
| mbedtls_ssl_transform *transform, |
| mbedtls_record *rec, |
| int (*f_rng)(void *, unsigned char *, size_t), |
| void *p_rng ); |
| int mbedtls_ssl_decrypt_buf( mbedtls_ssl_context const *ssl, |
| mbedtls_ssl_transform *transform, |
| mbedtls_record *rec ); |
| |
| /* Length of the "epoch" field in the record header */ |
| static inline size_t mbedtls_ssl_ep_len( const mbedtls_ssl_context *ssl ) |
| { |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) |
| if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM ) |
| return( 2 ); |
| #else |
| ((void) ssl); |
| #endif |
| return( 0 ); |
| } |
| |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) |
| int mbedtls_ssl_resend_hello_request( mbedtls_ssl_context *ssl ); |
| #endif /* MBEDTLS_SSL_PROTO_DTLS */ |
| |
| void mbedtls_ssl_set_timer( mbedtls_ssl_context *ssl, uint32_t millisecs ); |
| int mbedtls_ssl_check_timer( mbedtls_ssl_context *ssl ); |
| |
| void mbedtls_ssl_reset_in_out_pointers( mbedtls_ssl_context *ssl ); |
| void mbedtls_ssl_update_out_pointers( mbedtls_ssl_context *ssl, |
| mbedtls_ssl_transform *transform ); |
| void mbedtls_ssl_update_in_pointers( mbedtls_ssl_context *ssl ); |
| |
| int mbedtls_ssl_session_reset_int( mbedtls_ssl_context *ssl, int partial ); |
| void mbedtls_ssl_session_reset_msg_layer( mbedtls_ssl_context *ssl, |
| int partial ); |
| |
| /* |
| * Send pending alert |
| */ |
| int mbedtls_ssl_handle_pending_alert( mbedtls_ssl_context *ssl ); |
| |
| /* |
| * Set pending fatal alert flag. |
| */ |
| void mbedtls_ssl_pend_fatal_alert( mbedtls_ssl_context *ssl, |
| unsigned char alert_type, |
| int alert_reason ); |
| |
| /* Alias of mbedtls_ssl_pend_fatal_alert */ |
| #define MBEDTLS_SSL_PEND_FATAL_ALERT( type, user_return_value ) \ |
| mbedtls_ssl_pend_fatal_alert( ssl, type, user_return_value ) |
| |
| #if defined(MBEDTLS_SSL_DTLS_ANTI_REPLAY) |
| void mbedtls_ssl_dtls_replay_reset( mbedtls_ssl_context *ssl ); |
| #endif |
| |
| void mbedtls_ssl_handshake_wrapup_free_hs_transform( mbedtls_ssl_context *ssl ); |
| |
| #if defined(MBEDTLS_SSL_RENEGOTIATION) |
| int mbedtls_ssl_start_renegotiation( mbedtls_ssl_context *ssl ); |
| #endif /* MBEDTLS_SSL_RENEGOTIATION */ |
| |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) |
| size_t mbedtls_ssl_get_current_mtu( const mbedtls_ssl_context *ssl ); |
| void mbedtls_ssl_buffering_free( mbedtls_ssl_context *ssl ); |
| void mbedtls_ssl_flight_free( mbedtls_ssl_flight_item *flight ); |
| #endif /* MBEDTLS_SSL_PROTO_DTLS */ |
| |
| /** |
| * ssl utils functions for checking configuration. |
| */ |
| |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_3) |
| static inline int mbedtls_ssl_conf_is_tls13_only( const mbedtls_ssl_config *conf ) |
| { |
| return( conf->min_tls_version == MBEDTLS_SSL_VERSION_TLS1_3 && |
| conf->max_tls_version == MBEDTLS_SSL_VERSION_TLS1_3 ); |
| } |
| |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_3 */ |
| |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_2) |
| static inline int mbedtls_ssl_conf_is_tls12_only( const mbedtls_ssl_config *conf ) |
| { |
| return( conf->min_tls_version == MBEDTLS_SSL_VERSION_TLS1_2 && |
| conf->max_tls_version == MBEDTLS_SSL_VERSION_TLS1_2 ); |
| } |
| |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_2 */ |
| |
| static inline int mbedtls_ssl_conf_is_tls13_enabled( const mbedtls_ssl_config *conf ) |
| { |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_3) |
| return( conf->min_tls_version <= MBEDTLS_SSL_VERSION_TLS1_3 && |
| conf->max_tls_version >= MBEDTLS_SSL_VERSION_TLS1_3 ); |
| #else |
| ((void) conf); |
| return( 0 ); |
| #endif |
| } |
| |
| static inline int mbedtls_ssl_conf_is_tls12_enabled( const mbedtls_ssl_config *conf ) |
| { |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_2) |
| return( conf->min_tls_version <= MBEDTLS_SSL_VERSION_TLS1_2 && |
| conf->max_tls_version >= MBEDTLS_SSL_VERSION_TLS1_2 ); |
| #else |
| ((void) conf); |
| return( 0 ); |
| #endif |
| } |
| |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_2) && defined(MBEDTLS_SSL_PROTO_TLS1_3) |
| static inline int mbedtls_ssl_conf_is_hybrid_tls12_tls13( const mbedtls_ssl_config *conf ) |
| { |
| return( conf->min_tls_version == MBEDTLS_SSL_VERSION_TLS1_2 && |
| conf->max_tls_version == MBEDTLS_SSL_VERSION_TLS1_3 ); |
| } |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_2 && MBEDTLS_SSL_PROTO_TLS1_3 */ |
| |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_3) |
| |
| int mbedtls_ssl_tls13_process_finished_message( mbedtls_ssl_context *ssl ); |
| int mbedtls_ssl_tls13_write_finished_message( mbedtls_ssl_context *ssl ); |
| void mbedtls_ssl_tls13_handshake_wrapup( mbedtls_ssl_context *ssl ); |
| |
| /** |
| * \brief Given an SSL context and its associated configuration, write the TLS |
| * 1.3 specific extensions of the ClientHello message. |
| * |
| * \param[in] ssl SSL context |
| * \param[in] buf Base address of the buffer where to write the extensions |
| * \param[in] end End address of the buffer where to write the extensions |
| * \param[out] out_len Length of the data written into the buffer \p buf |
| */ |
| int mbedtls_ssl_tls13_write_client_hello_exts( mbedtls_ssl_context *ssl, |
| unsigned char *buf, |
| unsigned char *end, |
| size_t *out_len ); |
| |
| /** |
| * \brief TLS 1.3 client side state machine entry |
| * |
| * \param ssl SSL context |
| */ |
| int mbedtls_ssl_tls13_handshake_client_step( mbedtls_ssl_context *ssl ); |
| |
| /** |
| * \brief TLS 1.3 server side state machine entry |
| * |
| * \param ssl SSL context |
| */ |
| int mbedtls_ssl_tls13_handshake_server_step( mbedtls_ssl_context *ssl ); |
| |
| |
| /* |
| * Helper functions around key exchange modes. |
| */ |
| static inline unsigned mbedtls_ssl_conf_tls13_check_kex_modes( mbedtls_ssl_context *ssl, |
| int kex_mode_mask ) |
| { |
| return( ( ssl->conf->tls13_kex_modes & kex_mode_mask ) != 0 ); |
| } |
| |
| static inline int mbedtls_ssl_conf_tls13_psk_enabled( mbedtls_ssl_context *ssl ) |
| { |
| return( mbedtls_ssl_conf_tls13_check_kex_modes( ssl, |
| MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK ) ); |
| } |
| |
| static inline int mbedtls_ssl_conf_tls13_psk_ephemeral_enabled( mbedtls_ssl_context *ssl ) |
| { |
| return( mbedtls_ssl_conf_tls13_check_kex_modes( ssl, |
| MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL ) ); |
| } |
| |
| static inline int mbedtls_ssl_conf_tls13_ephemeral_enabled( mbedtls_ssl_context *ssl ) |
| { |
| return( mbedtls_ssl_conf_tls13_check_kex_modes( ssl, |
| MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL ) ); |
| } |
| |
| static inline int mbedtls_ssl_conf_tls13_some_ephemeral_enabled( mbedtls_ssl_context *ssl ) |
| { |
| return( mbedtls_ssl_conf_tls13_check_kex_modes( ssl, |
| MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ALL ) ); |
| } |
| |
| static inline int mbedtls_ssl_conf_tls13_some_psk_enabled( mbedtls_ssl_context *ssl ) |
| { |
| return( mbedtls_ssl_conf_tls13_check_kex_modes( ssl, |
| MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ALL ) ); |
| } |
| |
| /** |
| * Given a list of key exchange modes, check if at least one of them is |
| * supported. |
| * |
| * \param[in] ssl SSL context |
| * \param kex_modes_mask Mask of the key exchange modes to check |
| * |
| * \return 0 if at least one of the key exchange modes is supported, |
| * !=0 otherwise. |
| */ |
| static inline unsigned mbedtls_ssl_tls13_check_kex_modes( mbedtls_ssl_context *ssl, |
| int kex_modes_mask ) |
| { |
| return( ( ssl->handshake->tls13_kex_modes & kex_modes_mask ) == 0 ); |
| } |
| |
| static inline int mbedtls_ssl_tls13_psk_enabled( mbedtls_ssl_context *ssl ) |
| { |
| return( ! mbedtls_ssl_tls13_check_kex_modes( ssl, |
| MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK ) ); |
| } |
| |
| static inline int mbedtls_ssl_tls13_psk_ephemeral_enabled( |
| mbedtls_ssl_context *ssl ) |
| { |
| return( ! mbedtls_ssl_tls13_check_kex_modes( ssl, |
| MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL ) ); |
| } |
| |
| static inline int mbedtls_ssl_tls13_ephemeral_enabled( mbedtls_ssl_context *ssl ) |
| { |
| return( ! mbedtls_ssl_tls13_check_kex_modes( ssl, |
| MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL ) ); |
| } |
| |
| static inline int mbedtls_ssl_tls13_some_ephemeral_enabled( mbedtls_ssl_context *ssl ) |
| { |
| return( ! mbedtls_ssl_tls13_check_kex_modes( ssl, |
| MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ALL ) ); |
| } |
| |
| static inline int mbedtls_ssl_tls13_some_psk_enabled( mbedtls_ssl_context *ssl ) |
| { |
| return( ! mbedtls_ssl_tls13_check_kex_modes( ssl, |
| MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ALL ) ); |
| } |
| |
| /* |
| * Fetch TLS 1.3 handshake message header |
| */ |
| int mbedtls_ssl_tls13_fetch_handshake_msg( mbedtls_ssl_context *ssl, |
| unsigned hs_type, |
| unsigned char **buf, |
| size_t *buf_len ); |
| |
| /* |
| * Handler of TLS 1.3 server certificate message |
| */ |
| int mbedtls_ssl_tls13_process_certificate( mbedtls_ssl_context *ssl ); |
| |
| #if defined(MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED) |
| /* |
| * Handler of TLS 1.3 write Certificate message |
| */ |
| int mbedtls_ssl_tls13_write_certificate( mbedtls_ssl_context *ssl ); |
| |
| /* |
| * Handler of TLS 1.3 write Certificate Verify message |
| */ |
| int mbedtls_ssl_tls13_write_certificate_verify( mbedtls_ssl_context *ssl ); |
| |
| #endif /* MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED */ |
| |
| /* |
| * Generic handler of Certificate Verify |
| */ |
| int mbedtls_ssl_tls13_process_certificate_verify( mbedtls_ssl_context *ssl ); |
| |
| /* |
| * Write of dummy-CCS's for middlebox compatibility |
| */ |
| int mbedtls_ssl_tls13_write_change_cipher_spec( mbedtls_ssl_context *ssl ); |
| |
| int mbedtls_ssl_reset_transcript_for_hrr( mbedtls_ssl_context *ssl ); |
| |
| #if defined(MBEDTLS_ECDH_C) |
| int mbedtls_ssl_tls13_generate_and_write_ecdh_key_exchange( |
| mbedtls_ssl_context *ssl, |
| uint16_t named_group, |
| unsigned char *buf, |
| unsigned char *end, |
| size_t *out_len ); |
| #endif /* MBEDTLS_ECDH_C */ |
| |
| |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_3 */ |
| |
| #if defined(MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED) |
| /* |
| * Parse TLS 1.3 Signature Algorithm extension |
| */ |
| int mbedtls_ssl_tls13_parse_sig_alg_ext( mbedtls_ssl_context *ssl, |
| const unsigned char *buf, |
| const unsigned char *end ); |
| #endif /* MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED */ |
| |
| /* Get handshake transcript */ |
| int mbedtls_ssl_get_handshake_transcript( mbedtls_ssl_context *ssl, |
| const mbedtls_md_type_t md, |
| unsigned char *dst, |
| size_t dst_len, |
| size_t *olen ); |
| |
| /* |
| * Return supported groups. |
| * |
| * In future, invocations can be changed to ssl->conf->group_list |
| * when mbedtls_ssl_conf_curves() is deleted. |
| * |
| * ssl->handshake->group_list is either a translation of curve_list to IANA TLS group |
| * identifiers when mbedtls_ssl_conf_curves() has been used, or a pointer to |
| * ssl->conf->group_list when mbedtls_ssl_conf_groups() has been more recently invoked. |
| * |
| */ |
| static inline const void *mbedtls_ssl_get_groups( const mbedtls_ssl_context *ssl ) |
| { |
| #if defined(MBEDTLS_DEPRECATED_REMOVED) || !defined(MBEDTLS_ECP_C) |
| return( ssl->conf->group_list ); |
| #else |
| if( ( ssl->handshake != NULL ) && ( ssl->handshake->group_list != NULL ) ) |
| return( ssl->handshake->group_list ); |
| else |
| return( ssl->conf->group_list ); |
| #endif |
| } |
| |
| /* |
| * Helper functions for NamedGroup. |
| */ |
| static inline int mbedtls_ssl_tls12_named_group_is_ecdhe( uint16_t named_group ) |
| { |
| /* |
| * RFC 8422 section 5.1.1 |
| */ |
| return( named_group == MBEDTLS_SSL_IANA_TLS_GROUP_X25519 || |
| named_group == MBEDTLS_SSL_IANA_TLS_GROUP_BP256R1 || |
| named_group == MBEDTLS_SSL_IANA_TLS_GROUP_BP384R1 || |
| named_group == MBEDTLS_SSL_IANA_TLS_GROUP_BP512R1 || |
| named_group == MBEDTLS_SSL_IANA_TLS_GROUP_X448 || |
| /* Below deprected curves should be removed with notice to users */ |
| named_group == MBEDTLS_SSL_IANA_TLS_GROUP_SECP192K1 || |
| named_group == MBEDTLS_SSL_IANA_TLS_GROUP_SECP192R1 || |
| named_group == MBEDTLS_SSL_IANA_TLS_GROUP_SECP224K1 || |
| named_group == MBEDTLS_SSL_IANA_TLS_GROUP_SECP224R1 || |
| named_group == MBEDTLS_SSL_IANA_TLS_GROUP_SECP256K1 || |
| named_group == MBEDTLS_SSL_IANA_TLS_GROUP_SECP256R1 || |
| named_group == MBEDTLS_SSL_IANA_TLS_GROUP_SECP384R1 || |
| named_group == MBEDTLS_SSL_IANA_TLS_GROUP_SECP521R1 ); |
| } |
| |
| static inline int mbedtls_ssl_tls13_named_group_is_ecdhe( uint16_t named_group ) |
| { |
| return( named_group == MBEDTLS_SSL_IANA_TLS_GROUP_X25519 || |
| named_group == MBEDTLS_SSL_IANA_TLS_GROUP_SECP256R1 || |
| named_group == MBEDTLS_SSL_IANA_TLS_GROUP_SECP384R1 || |
| named_group == MBEDTLS_SSL_IANA_TLS_GROUP_SECP521R1 || |
| named_group == MBEDTLS_SSL_IANA_TLS_GROUP_X448 ); |
| } |
| |
| static inline int mbedtls_ssl_tls13_named_group_is_dhe( uint16_t named_group ) |
| { |
| return( named_group >= MBEDTLS_SSL_IANA_TLS_GROUP_FFDHE2048 && |
| named_group <= MBEDTLS_SSL_IANA_TLS_GROUP_FFDHE8192 ); |
| } |
| |
| static inline int mbedtls_ssl_named_group_is_offered( |
| const mbedtls_ssl_context *ssl, uint16_t named_group ) |
| { |
| const uint16_t *group_list = mbedtls_ssl_get_groups( ssl ); |
| |
| if( group_list == NULL ) |
| return( 0 ); |
| |
| for( ; *group_list != 0; group_list++ ) |
| { |
| if( *group_list == named_group ) |
| return( 1 ); |
| } |
| |
| return( 0 ); |
| } |
| |
| static inline int mbedtls_ssl_named_group_is_supported( uint16_t named_group ) |
| { |
| #if defined(MBEDTLS_ECDH_C) |
| if( mbedtls_ssl_tls13_named_group_is_ecdhe( named_group ) ) |
| { |
| const mbedtls_ecp_curve_info *curve_info = |
| mbedtls_ecp_curve_info_from_tls_id( named_group ); |
| if( curve_info != NULL ) |
| return( 1 ); |
| } |
| #else |
| ((void) named_group); |
| #endif /* MBEDTLS_ECDH_C */ |
| return( 0 ); |
| } |
| |
| /* |
| * Return supported signature algorithms. |
| * |
| * In future, invocations can be changed to ssl->conf->sig_algs when |
| * mbedtls_ssl_conf_sig_hashes() is deleted. |
| * |
| * ssl->handshake->sig_algs is either a translation of sig_hashes to IANA TLS |
| * signature algorithm identifiers when mbedtls_ssl_conf_sig_hashes() has been |
| * used, or a pointer to ssl->conf->sig_algs when mbedtls_ssl_conf_sig_algs() has |
| * been more recently invoked. |
| * |
| */ |
| static inline const void *mbedtls_ssl_get_sig_algs( |
| const mbedtls_ssl_context *ssl ) |
| { |
| #if defined(MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED) |
| |
| #if !defined(MBEDTLS_DEPRECATED_REMOVED) |
| if( ssl->handshake != NULL && ssl->handshake->sig_algs != NULL ) |
| return( ssl->handshake->sig_algs ); |
| #endif |
| return( ssl->conf->sig_algs ); |
| |
| #else /* MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED */ |
| |
| ((void) ssl); |
| return( NULL ); |
| #endif /* MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED */ |
| } |
| |
| |
| #if defined(MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED) |
| |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_3) |
| static inline int mbedtls_ssl_sig_alg_is_received( const mbedtls_ssl_context *ssl, |
| uint16_t own_sig_alg ) |
| { |
| const uint16_t *sig_alg = ssl->handshake->received_sig_algs; |
| if( sig_alg == NULL ) |
| return( 0 ); |
| |
| for( ; *sig_alg != MBEDTLS_TLS1_3_SIG_NONE; sig_alg++ ) |
| { |
| if( *sig_alg == own_sig_alg ) |
| return( 1 ); |
| } |
| return( 0 ); |
| } |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_3 */ |
| |
| static inline int mbedtls_ssl_sig_alg_is_offered( const mbedtls_ssl_context *ssl, |
| uint16_t proposed_sig_alg ) |
| { |
| const uint16_t *sig_alg = mbedtls_ssl_get_sig_algs( ssl ); |
| if( sig_alg == NULL ) |
| return( 0 ); |
| |
| for( ; *sig_alg != MBEDTLS_TLS1_3_SIG_NONE; sig_alg++ ) |
| { |
| if( *sig_alg == proposed_sig_alg ) |
| return( 1 ); |
| } |
| return( 0 ); |
| } |
| |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_3) |
| static inline int mbedtls_ssl_tls13_get_pk_type_and_md_alg_from_sig_alg( |
| uint16_t sig_alg, mbedtls_pk_type_t *pk_type, mbedtls_md_type_t *md_alg ) |
| { |
| *pk_type = MBEDTLS_PK_NONE; |
| *md_alg = MBEDTLS_MD_NONE; |
| |
| switch( sig_alg ) |
| { |
| #if defined(MBEDTLS_ECDSA_C) |
| |
| #if defined(MBEDTLS_SHA256_C) && defined(MBEDTLS_ECP_DP_SECP256R1_ENABLED) |
| case MBEDTLS_TLS1_3_SIG_ECDSA_SECP256R1_SHA256: |
| *md_alg = MBEDTLS_MD_SHA256; |
| *pk_type = MBEDTLS_PK_ECDSA; |
| break; |
| #endif /* MBEDTLS_SHA256_C && MBEDTLS_ECP_DP_SECP256R1_ENABLED */ |
| |
| #if defined(MBEDTLS_SHA384_C) && defined(MBEDTLS_ECP_DP_SECP384R1_ENABLED) |
| case MBEDTLS_TLS1_3_SIG_ECDSA_SECP384R1_SHA384: |
| *md_alg = MBEDTLS_MD_SHA384; |
| *pk_type = MBEDTLS_PK_ECDSA; |
| break; |
| #endif /* MBEDTLS_SHA384_C && MBEDTLS_ECP_DP_SECP384R1_ENABLED */ |
| |
| #if defined(MBEDTLS_SHA512_C) && defined(MBEDTLS_ECP_DP_SECP521R1_ENABLED) |
| case MBEDTLS_TLS1_3_SIG_ECDSA_SECP521R1_SHA512: |
| *md_alg = MBEDTLS_MD_SHA512; |
| *pk_type = MBEDTLS_PK_ECDSA; |
| break; |
| #endif /* MBEDTLS_SHA512_C && MBEDTLS_ECP_DP_SECP521R1_ENABLED */ |
| |
| #endif /* MBEDTLS_ECDSA_C */ |
| |
| #if defined(MBEDTLS_X509_RSASSA_PSS_SUPPORT) |
| |
| #if defined(MBEDTLS_SHA256_C) |
| case MBEDTLS_TLS1_3_SIG_RSA_PSS_RSAE_SHA256: |
| *md_alg = MBEDTLS_MD_SHA256; |
| *pk_type = MBEDTLS_PK_RSASSA_PSS; |
| break; |
| #endif /* MBEDTLS_SHA256_C */ |
| |
| #if defined(MBEDTLS_SHA384_C) |
| case MBEDTLS_TLS1_3_SIG_RSA_PSS_RSAE_SHA384: |
| *md_alg = MBEDTLS_MD_SHA384; |
| *pk_type = MBEDTLS_PK_RSASSA_PSS; |
| break; |
| #endif /* MBEDTLS_SHA384_C */ |
| |
| #if defined(MBEDTLS_SHA512_C) |
| case MBEDTLS_TLS1_3_SIG_RSA_PSS_RSAE_SHA512: |
| *md_alg = MBEDTLS_MD_SHA512; |
| *pk_type = MBEDTLS_PK_RSASSA_PSS; |
| break; |
| #endif /* MBEDTLS_SHA512_C */ |
| |
| #endif /* MBEDTLS_X509_RSASSA_PSS_SUPPORT */ |
| |
| #if defined(MBEDTLS_PKCS1_V15) && defined(MBEDTLS_RSA_C) |
| |
| #if defined(MBEDTLS_SHA256_C) |
| case MBEDTLS_TLS1_3_SIG_RSA_PKCS1_SHA256: |
| *md_alg = MBEDTLS_MD_SHA256; |
| *pk_type = MBEDTLS_PK_RSA; |
| break; |
| #endif /* MBEDTLS_SHA256_C */ |
| |
| #if defined(MBEDTLS_SHA384_C) |
| case MBEDTLS_TLS1_3_SIG_RSA_PKCS1_SHA384: |
| *md_alg = MBEDTLS_MD_SHA384; |
| *pk_type = MBEDTLS_PK_RSA; |
| break; |
| #endif /* MBEDTLS_SHA384_C */ |
| |
| #if defined(MBEDTLS_SHA512_C) |
| case MBEDTLS_TLS1_3_SIG_RSA_PKCS1_SHA512: |
| *md_alg = MBEDTLS_MD_SHA512; |
| *pk_type = MBEDTLS_PK_RSA; |
| break; |
| #endif /* MBEDTLS_SHA512_C */ |
| |
| #endif /* MBEDTLS_PKCS1_V15 && MBEDTLS_RSA_C */ |
| |
| default: |
| return( MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE ); |
| } |
| return( 0 ); |
| } |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_3 */ |
| |
| static inline int mbedtls_ssl_sig_alg_is_supported( |
| const mbedtls_ssl_context *ssl, |
| const uint16_t sig_alg ) |
| { |
| |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_2) |
| if( ssl->tls_version == MBEDTLS_SSL_VERSION_TLS1_2 ) |
| { |
| /* High byte is hash */ |
| unsigned char hash = MBEDTLS_BYTE_1( sig_alg ); |
| unsigned char sig = MBEDTLS_BYTE_0( sig_alg ); |
| |
| switch( hash ) |
| { |
| #if defined(MBEDTLS_MD5_C) |
| case MBEDTLS_SSL_HASH_MD5: |
| break; |
| #endif |
| |
| #if defined(MBEDTLS_SHA1_C) |
| case MBEDTLS_SSL_HASH_SHA1: |
| break; |
| #endif |
| |
| #if defined(MBEDTLS_SHA224_C) |
| case MBEDTLS_SSL_HASH_SHA224: |
| break; |
| #endif |
| |
| #if defined(MBEDTLS_SHA256_C) |
| case MBEDTLS_SSL_HASH_SHA256: |
| break; |
| #endif |
| |
| #if defined(MBEDTLS_SHA384_C) |
| case MBEDTLS_SSL_HASH_SHA384: |
| break; |
| #endif |
| |
| #if defined(MBEDTLS_SHA512_C) |
| case MBEDTLS_SSL_HASH_SHA512: |
| break; |
| #endif |
| |
| default: |
| return( 0 ); |
| } |
| |
| switch( sig ) |
| { |
| #if defined(MBEDTLS_RSA_C) |
| case MBEDTLS_SSL_SIG_RSA: |
| break; |
| #endif |
| |
| #if defined(MBEDTLS_ECDSA_C) |
| case MBEDTLS_SSL_SIG_ECDSA: |
| break; |
| #endif |
| |
| default: |
| return( 0 ); |
| } |
| |
| return( 1 ); |
| } |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_2 */ |
| |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_3) |
| if( ssl->tls_version == MBEDTLS_SSL_VERSION_TLS1_3 ) |
| { |
| mbedtls_pk_type_t pk_type; |
| mbedtls_md_type_t md_alg; |
| return( ! mbedtls_ssl_tls13_get_pk_type_and_md_alg_from_sig_alg( |
| sig_alg, &pk_type, &md_alg ) ); |
| } |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_3 */ |
| ((void) ssl); |
| ((void) sig_alg); |
| return( 0 ); |
| } |
| #endif /* MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED */ |
| |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_2) && \ |
| defined(MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED) |
| #if defined(MBEDTLS_ECDSA_C) && defined(MBEDTLS_RSA_C) |
| #define MBEDTLS_SSL_SIG_ALG( hash ) (( hash << 8 ) | MBEDTLS_SSL_SIG_ECDSA), \ |
| (( hash << 8 ) | MBEDTLS_SSL_SIG_RSA), |
| #elif defined(MBEDTLS_ECDSA_C) |
| #define MBEDTLS_SSL_SIG_ALG( hash ) (( hash << 8 ) | MBEDTLS_SSL_SIG_ECDSA), |
| #elif defined(MBEDTLS_RSA_C) |
| #define MBEDTLS_SSL_SIG_ALG( hash ) (( hash << 8 ) | MBEDTLS_SSL_SIG_RSA), |
| #else |
| #define MBEDTLS_SSL_SIG_ALG( hash ) |
| #endif /* MBEDTLS_ECDSA_C && MBEDTLS_RSA_C */ |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_2 && MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED */ |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) |
| /* Corresponding PSA algorithm for MBEDTLS_CIPHER_NULL. |
| * Same value is used fo PSA_ALG_CATEGORY_CIPHER, hence it is |
| * guaranteed to not be a valid PSA algorithm identifier. |
| */ |
| #define MBEDTLS_SSL_NULL_CIPHER 0x04000000 |
| |
| /** |
| * \brief Translate mbedtls cipher type/taglen pair to psa: |
| * algorithm, key type and key size. |
| * |
| * \param mbedtls_cipher_type [in] given mbedtls cipher type |
| * \param taglen [in] given tag length |
| * 0 - default tag length |
| * \param alg [out] corresponding PSA alg |
| * There is no corresponding PSA |
| * alg for MBEDTLS_CIPHER_NULL, so |
| * in this case MBEDTLS_SSL_NULL_CIPHER |
| * is returned via this parameter |
| * \param key_type [out] corresponding PSA key type |
| * \param key_size [out] corresponding PSA key size |
| * |
| * \return PSA_SUCCESS on success or PSA_ERROR_NOT_SUPPORTED if |
| * conversion is not supported. |
| */ |
| psa_status_t mbedtls_ssl_cipher_to_psa( mbedtls_cipher_type_t mbedtls_cipher_type, |
| size_t taglen, |
| psa_algorithm_t *alg, |
| psa_key_type_t *key_type, |
| size_t *key_size ); |
| #endif /* MBEDTLS_USE_PSA_CRYPTO */ |
| |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) || defined(MBEDTLS_SSL_PROTO_TLS1_3) |
| /** |
| * \brief Convert given PSA status to mbedtls error code. |
| * |
| * \param status [in] given PSA status |
| * |
| * \return corresponding mbedtls error code |
| */ |
| static inline int psa_ssl_status_to_mbedtls( psa_status_t status ) |
| { |
| switch( status ) |
| { |
| case PSA_SUCCESS: |
| return( 0 ); |
| case PSA_ERROR_INSUFFICIENT_MEMORY: |
| return( MBEDTLS_ERR_SSL_ALLOC_FAILED ); |
| case PSA_ERROR_NOT_SUPPORTED: |
| return( MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE ); |
| case PSA_ERROR_INVALID_SIGNATURE: |
| return( MBEDTLS_ERR_SSL_INVALID_MAC ); |
| case PSA_ERROR_INVALID_ARGUMENT: |
| return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA ); |
| case PSA_ERROR_BAD_STATE: |
| return( MBEDTLS_ERR_SSL_INTERNAL_ERROR ); |
| case PSA_ERROR_BUFFER_TOO_SMALL: |
| return( MBEDTLS_ERR_SSL_BUFFER_TOO_SMALL ); |
| default: |
| return( MBEDTLS_ERR_PLATFORM_HW_ACCEL_FAILED ); |
| } |
| } |
| #endif /* MBEDTLS_USE_PSA_CRYPTO || MBEDTLS_SSL_PROTO_TLS1_3 */ |
| |
| /** |
| * \brief TLS record protection modes |
| */ |
| typedef enum { |
| MBEDTLS_SSL_MODE_STREAM = 0, |
| MBEDTLS_SSL_MODE_CBC, |
| MBEDTLS_SSL_MODE_CBC_ETM, |
| MBEDTLS_SSL_MODE_AEAD |
| } mbedtls_ssl_mode_t; |
| |
| mbedtls_ssl_mode_t mbedtls_ssl_get_mode_from_transform( |
| const mbedtls_ssl_transform *transform ); |
| |
| #if defined(MBEDTLS_SSL_SOME_SUITES_USE_CBC_ETM) |
| mbedtls_ssl_mode_t mbedtls_ssl_get_mode_from_ciphersuite( |
| int encrypt_then_mac, |
| const mbedtls_ssl_ciphersuite_t *suite ); |
| #else |
| mbedtls_ssl_mode_t mbedtls_ssl_get_mode_from_ciphersuite( |
| const mbedtls_ssl_ciphersuite_t *suite ); |
| #endif /* MBEDTLS_SSL_SOME_SUITES_USE_CBC_ETM */ |
| |
| #if defined(MBEDTLS_ECDH_C) |
| |
| int mbedtls_ssl_tls13_read_public_ecdhe_share( mbedtls_ssl_context *ssl, |
| const unsigned char *buf, |
| size_t buf_len ); |
| |
| #endif /* MBEDTLS_ECDH_C */ |
| |
| static inline int mbedtls_ssl_tls13_cipher_suite_is_offered( |
| mbedtls_ssl_context *ssl, int cipher_suite ) |
| { |
| const int *ciphersuite_list = ssl->conf->ciphersuite_list; |
| |
| /* Check whether we have offered this ciphersuite */ |
| for ( size_t i = 0; ciphersuite_list[i] != 0; i++ ) |
| { |
| if( ciphersuite_list[i] == cipher_suite ) |
| { |
| return( 1 ); |
| } |
| } |
| return( 0 ); |
| } |
| |
| /** |
| * \brief Validate cipher suite against config in SSL context. |
| * |
| * \param ssl SSL context |
| * \param suite_info Cipher suite to validate |
| * \param min_tls_version Minimal TLS version to accept a cipher suite |
| * \param max_tls_version Maximal TLS version to accept a cipher suite |
| * |
| * \return 0 if valid, negative value otherwise. |
| */ |
| int mbedtls_ssl_validate_ciphersuite( |
| const mbedtls_ssl_context *ssl, |
| const mbedtls_ssl_ciphersuite_t *suite_info, |
| mbedtls_ssl_protocol_version min_tls_version, |
| mbedtls_ssl_protocol_version max_tls_version ); |
| |
| #endif /* ssl_misc.h */ |