Reject low-order points on Curve25519 early
We were already rejecting them at the end, due to the fact that with the
usual (x, z) formulas they lead to the result (0, 0) so when we want to
normalize at the end, trying to compute the modular inverse of z will
give an error.
If we wanted to support those points, we'd a special case in
ecp_normalize_mxz(). But it's actually permitted by all sources
(RFC 7748 say we MAY reject 0 as a result) and recommended by some to
reject those points (either to ensure contributory behaviour, or to
protect against timing attack when the underlying field arithmetic is
not constant-time).
Since our field arithmetic is indeed not constant-time, let's reject
those points before they get mixed with sensitive data (in
ecp_mul_mxz()), in order to avoid exploitable leaks caused by the
special cases they would trigger. (See the "May the Fourth" paper
https://eprint.iacr.org/2017/806.pdf)
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
diff --git a/library/ecp.c b/library/ecp.c
index 3dc1378..fcd3e9e 100644
--- a/library/ecp.c
+++ b/library/ecp.c
@@ -2746,6 +2746,56 @@
#endif /* MBEDTLS_ECP_SHORT_WEIERSTRASS_ENABLED */
#if defined(MBEDTLS_ECP_MONTGOMERY_ENABLED)
+#if defined(MBEDTLS_ECP_DP_CURVE25519_ENABLED)
+/*
+ * Check that the input point is not one of the low-order points.
+ * This is recommended by the "May the Fourth" paper:
+ * https://eprint.iacr.org/2017/806.pdf
+ * Those points are never sent by an honest peer.
+ */
+static int ecp_check_pubkey_x25519( const mbedtls_mpi *X, const mbedtls_mpi *P )
+{
+ int ret;
+ mbedtls_mpi XmP, bad;
+
+ mbedtls_mpi_init( &XmP );
+ mbedtls_mpi_init( &bad );
+
+ /* Reduce X mod P so that we only need to check values less than P.
+ * We know X < 2^256 so we can proceed by subtraction. */
+ MBEDTLS_MPI_CHK( mbedtls_mpi_copy( &XmP, X ) );
+ while( mbedtls_mpi_cmp_mpi( &XmP, P ) >= 0 )
+ MBEDTLS_MPI_CHK( mbedtls_mpi_sub_mpi( &XmP, &XmP, P ) );
+
+ /* Check against the known bad values that are less than P in the
+ * following list: https://cr.yp.to/ecdh.html#validate */
+ if( mbedtls_mpi_cmp_int( &XmP, 1 ) <= 0 ) /* takes care of 0 and 1 */
+ return( MBEDTLS_ERR_ECP_INVALID_KEY );
+
+ MBEDTLS_MPI_CHK( mbedtls_mpi_read_string( &bad, 10,
+ "325606250916557431795983626356110631294008115727848805560023387167927233504" ) );
+ if( mbedtls_mpi_cmp_mpi( &XmP, &bad ) == 0 )
+ return( MBEDTLS_ERR_ECP_INVALID_KEY );
+
+ MBEDTLS_MPI_CHK( mbedtls_mpi_read_string( &bad, 10,
+ "39382357235489614581723060781553021112529911719440698176882885853963445705823" ) );
+ if( mbedtls_mpi_cmp_mpi( &XmP, &bad ) == 0 )
+ return( MBEDTLS_ERR_ECP_INVALID_KEY );
+
+ MBEDTLS_MPI_CHK( mbedtls_mpi_sub_int( &bad, P, 1 ) );
+ if( mbedtls_mpi_cmp_mpi( &XmP, &bad ) == 0 )
+ return( MBEDTLS_ERR_ECP_INVALID_KEY );
+
+ ret = 0;
+
+cleanup:
+ mbedtls_mpi_free( &XmP );
+ mbedtls_mpi_free( &bad );
+
+ return( ret );
+}
+#endif /* MBEDTLS_ECP_DP_CURVE25519_ENABLED */
+
/*
* Check validity of a public key for Montgomery curves with x-only schemes
*/
@@ -2757,6 +2807,17 @@
if( mbedtls_mpi_size( &pt->X ) > ( grp->nbits + 7 ) / 8 )
return( MBEDTLS_ERR_ECP_INVALID_KEY );
+ /* Implicit in all standards (as they don't consider negative numbers):
+ * X must be non-negative. This is normally ensured by the way it's
+ * encoded for transmission, but let's be extra sure. */
+ if( mbedtls_mpi_cmp_int( &pt->X, 0 ) < 0 )
+ return( MBEDTLS_ERR_ECP_INVALID_KEY );
+
+#if defined(MBEDTLS_ECP_DP_CURVE25519_ENABLED)
+ if( grp->id == MBEDTLS_ECP_DP_CURVE25519 )
+ return( ecp_check_pubkey_x25519( &pt->X, &grp->P ) );
+#endif
+
return( 0 );
}
#endif /* MBEDTLS_ECP_MONTGOMERY_ENABLED */
diff --git a/tests/suites/test_suite_ecp.data b/tests/suites/test_suite_ecp.data
index 485046f..7030477 100644
--- a/tests/suites/test_suite_ecp.data
+++ b/tests/suites/test_suite_ecp.data
@@ -473,15 +473,15 @@
ECP point multiplication Curve25519 (element of order 2: origin) #3
depends_on:MBEDTLS_ECP_DP_CURVE25519_ENABLED
-ecp_test_mul:MBEDTLS_ECP_DP_CURVE25519:"5AC99F33632E5A768DE7E81BF854C27C46E3FBF2ABBACD29EC4AFF517369C660":"00":"00":"01":"00":"01":"00":MBEDTLS_ERR_MPI_NOT_ACCEPTABLE
+ecp_test_mul:MBEDTLS_ECP_DP_CURVE25519:"5AC99F33632E5A768DE7E81BF854C27C46E3FBF2ABBACD29EC4AFF517369C660":"00":"00":"01":"00":"01":"00":MBEDTLS_ERR_ECP_INVALID_KEY
ECP point multiplication Curve25519 (element of order 4: 1) #4
depends_on:MBEDTLS_ECP_DP_CURVE25519_ENABLED
-ecp_test_mul:MBEDTLS_ECP_DP_CURVE25519:"5AC99F33632E5A768DE7E81BF854C27C46E3FBF2ABBACD29EC4AFF517369C660":"01":"00":"01":"00":"01":"00":MBEDTLS_ERR_MPI_NOT_ACCEPTABLE
+ecp_test_mul:MBEDTLS_ECP_DP_CURVE25519:"5AC99F33632E5A768DE7E81BF854C27C46E3FBF2ABBACD29EC4AFF517369C660":"01":"00":"01":"00":"01":"00":MBEDTLS_ERR_ECP_INVALID_KEY
ECP point multiplication Curve25519 (element of order 8) #5
depends_on:MBEDTLS_ECP_DP_CURVE25519_ENABLED
-ecp_test_mul:MBEDTLS_ECP_DP_CURVE25519:"5AC99F33632E5A768DE7E81BF854C27C46E3FBF2ABBACD29EC4AFF517369C660":"B8495F16056286FDB1329CEB8D09DA6AC49FF1FAE35616AEB8413B7C7AEBE0":"00":"01":"00":"01":"00":MBEDTLS_ERR_MPI_NOT_ACCEPTABLE
+ecp_test_mul:MBEDTLS_ECP_DP_CURVE25519:"5AC99F33632E5A768DE7E81BF854C27C46E3FBF2ABBACD29EC4AFF517369C660":"B8495F16056286FDB1329CEB8D09DA6AC49FF1FAE35616AEB8413B7C7AEBE0":"00":"01":"00":"01":"00":MBEDTLS_ERR_ECP_INVALID_KEY
ECP point multiplication rng fail secp256r1
depends_on:MBEDTLS_ECP_DP_SECP256R1_ENABLED
