| /* |
| * PSA RSA layer on top of Mbed TLS crypto |
| */ |
| /* |
| * Copyright The Mbed TLS Contributors |
| * SPDX-License-Identifier: Apache-2.0 |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); you may |
| * not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #ifndef PSA_CRYPTO_RSA_H |
| #define PSA_CRYPTO_RSA_H |
| |
| #include <psa/crypto.h> |
| #include <mbedtls/rsa.h> |
| |
| /** Load the contents of a key buffer into an internal RSA representation |
| * |
| * \param[in] type The type of key contained in \p data. |
| * \param[in] data The buffer from which to load the representation. |
| * \param[in] data_length The size in bytes of \p data. |
| * \param[out] p_rsa Returns a pointer to an RSA context on success. |
| * The caller is responsible for freeing both the |
| * contents of the context and the context itself |
| * when done. |
| */ |
| psa_status_t mbedtls_psa_rsa_load_representation( psa_key_type_t type, |
| const uint8_t *data, |
| size_t data_length, |
| mbedtls_rsa_context **p_rsa ); |
| |
| /** Import an RSA key in binary format. |
| * |
| * \note The signature of this function is that of a PSA driver |
| * import_key entry point. This function behaves as an import_key |
| * entry point as defined in the PSA driver interface specification for |
| * transparent drivers. |
| * |
| * \param[in] attributes The attributes for the key to import. |
| * \param[in] data The buffer containing the key data in import |
| * format. |
| * \param[in] data_length Size of the \p data buffer in bytes. |
| * \param[out] key_buffer The buffer containing the key data in output |
| * format. |
| * \param[in] key_buffer_size Size of the \p key_buffer buffer in bytes. This |
| * size is greater or equal to \p data_length. |
| * \param[out] key_buffer_length The length of the data written in \p |
| * key_buffer in bytes. |
| * \param[out] bits The key size in number of bits. |
| * |
| * \retval #PSA_SUCCESS The RSA key was imported successfully. |
| * \retval #PSA_ERROR_INVALID_ARGUMENT |
| * The key data is not correctly formatted. |
| * \retval #PSA_ERROR_NOT_SUPPORTED |
| * \retval #PSA_ERROR_INSUFFICIENT_MEMORY |
| * \retval #PSA_ERROR_CORRUPTION_DETECTED |
| */ |
| psa_status_t mbedtls_psa_rsa_import_key( |
| const psa_key_attributes_t *attributes, |
| const uint8_t *data, size_t data_length, |
| uint8_t *key_buffer, size_t key_buffer_size, |
| size_t *key_buffer_length, size_t *bits ); |
| |
| /** Export an RSA key to export representation |
| * |
| * \param[in] type The type of key (public/private) to export |
| * \param[in] rsa The internal RSA representation from which to export |
| * \param[out] data The buffer to export to |
| * \param[in] data_size The length of the buffer to export to |
| * \param[out] data_length The amount of bytes written to \p data |
| */ |
| psa_status_t mbedtls_psa_rsa_export_key( psa_key_type_t type, |
| mbedtls_rsa_context *rsa, |
| uint8_t *data, |
| size_t data_size, |
| size_t *data_length ); |
| |
| /** Export a public RSA key or the public part of an RSA key pair in binary |
| * format. |
| * |
| * \note The signature of this function is that of a PSA driver |
| * export_public_key entry point. This function behaves as an |
| * export_public_key entry point as defined in the PSA driver interface |
| * specification. |
| * |
| * \param[in] attributes The attributes for the key to export. |
| * \param[in] key_buffer Material or context of the key to export. |
| * \param[in] key_buffer_size Size of the \p key_buffer buffer in bytes. |
| * \param[out] data Buffer where the key data is to be written. |
| * \param[in] data_size Size of the \p data buffer in bytes. |
| * \param[out] data_length On success, the number of bytes written in |
| * \p data. |
| * |
| * \retval #PSA_SUCCESS The RSA public key was exported successfully. |
| * \retval #PSA_ERROR_NOT_SUPPORTED |
| * \retval #PSA_ERROR_COMMUNICATION_FAILURE |
| * \retval #PSA_ERROR_HARDWARE_FAILURE |
| * \retval #PSA_ERROR_CORRUPTION_DETECTED |
| * \retval #PSA_ERROR_STORAGE_FAILURE |
| * \retval #PSA_ERROR_INSUFFICIENT_MEMORY |
| */ |
| psa_status_t mbedtls_psa_rsa_export_public_key( |
| const psa_key_attributes_t *attributes, |
| const uint8_t *key_buffer, size_t key_buffer_size, |
| uint8_t *data, size_t data_size, size_t *data_length ); |
| |
| /** |
| * \brief Generate an RSA key. |
| * |
| * \note The signature of the function is that of a PSA driver generate_key |
| * entry point. |
| * |
| * \param[in] attributes The attributes for the RSA key to generate. |
| * \param[out] key_buffer Buffer where the key data is to be written. |
| * \param[in] key_buffer_size Size of \p key_buffer in bytes. |
| * \param[out] key_buffer_length On success, the number of bytes written in |
| * \p key_buffer. |
| * |
| * \retval #PSA_SUCCESS |
| * The key was successfully generated. |
| * \retval #PSA_ERROR_NOT_SUPPORTED |
| * Key length or type not supported. |
| * \retval #PSA_ERROR_BUFFER_TOO_SMALL |
| * The size of \p key_buffer is too small. |
| */ |
| psa_status_t mbedtls_psa_rsa_generate_key( |
| const psa_key_attributes_t *attributes, |
| uint8_t *key_buffer, size_t key_buffer_size, size_t *key_buffer_length ); |
| |
| /** Sign an already-calculated hash with an RSA private key. |
| * |
| * \note The signature of this function is that of a PSA driver |
| * sign_hash entry point. This function behaves as a sign_hash |
| * entry point as defined in the PSA driver interface specification for |
| * transparent drivers. |
| * |
| * \param[in] attributes The attributes of the RSA key to use for the |
| * operation. |
| * \param[in] key_buffer The buffer containing the RSA key context. |
| * format. |
| * \param[in] key_buffer_size Size of the \p key_buffer buffer in bytes. |
| * \param[in] alg A signature algorithm that is compatible with |
| * an RSA key. |
| * \param[in] hash The hash or message to sign. |
| * \param[in] hash_length Size of the \p hash buffer in bytes. |
| * \param[out] signature Buffer where the signature is to be written. |
| * \param[in] signature_size Size of the \p signature buffer in bytes. |
| * \param[out] signature_length On success, the number of bytes |
| * that make up the returned signature value. |
| * |
| * \retval #PSA_SUCCESS |
| * \retval #PSA_ERROR_BUFFER_TOO_SMALL |
| * The size of the \p signature buffer is too small. You can |
| * determine a sufficient buffer size by calling |
| * #PSA_SIGN_OUTPUT_SIZE(\c PSA_KEY_TYPE_RSA_KEY_PAIR, \c key_bits, |
| * \p alg) where \c key_bits is the bit-size of the RSA key. |
| * \retval #PSA_ERROR_NOT_SUPPORTED |
| * \retval #PSA_ERROR_INVALID_ARGUMENT |
| * \retval #PSA_ERROR_INSUFFICIENT_MEMORY |
| * \retval #PSA_ERROR_CORRUPTION_DETECTED |
| * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY |
| */ |
| psa_status_t mbedtls_psa_rsa_sign_hash( |
| const psa_key_attributes_t *attributes, |
| const uint8_t *key_buffer, size_t key_buffer_size, |
| psa_algorithm_t alg, const uint8_t *hash, size_t hash_length, |
| uint8_t *signature, size_t signature_size, size_t *signature_length ); |
| |
| /** |
| * \brief Verify the signature a hash or short message using a public RSA key. |
| * |
| * \note The signature of this function is that of a PSA driver |
| * verify_hash entry point. This function behaves as a verify_hash |
| * entry point as defined in the PSA driver interface specification for |
| * transparent drivers. |
| * |
| * \param[in] attributes The attributes of the RSA key to use for the |
| * operation. |
| * \param[in] key_buffer The buffer containing the RSA key context. |
| * format. |
| * \param[in] key_buffer_size Size of the \p key_buffer buffer in bytes. |
| * \param[in] alg A signature algorithm that is compatible with |
| * an RSA key. |
| * \param[in] hash The hash or message whose signature is to be |
| * verified. |
| * \param[in] hash_length Size of the \p hash buffer in bytes. |
| * \param[in] signature Buffer containing the signature to verify. |
| * \param[in] signature_length Size of the \p signature buffer in bytes. |
| * |
| * \retval #PSA_SUCCESS |
| * The signature is valid. |
| * \retval #PSA_ERROR_INVALID_SIGNATURE |
| * The calculation was performed successfully, but the passed |
| * signature is not a valid signature. |
| * \retval #PSA_ERROR_NOT_SUPPORTED |
| * \retval #PSA_ERROR_INVALID_ARGUMENT |
| * \retval #PSA_ERROR_INSUFFICIENT_MEMORY |
| */ |
| psa_status_t mbedtls_psa_rsa_verify_hash( |
| const psa_key_attributes_t *attributes, |
| const uint8_t *key_buffer, size_t key_buffer_size, |
| psa_algorithm_t alg, const uint8_t *hash, size_t hash_length, |
| const uint8_t *signature, size_t signature_length ); |
| |
| /* |
| * BEYOND THIS POINT, TEST DRIVER ENTRY POINTS ONLY. |
| */ |
| |
| #if defined(PSA_CRYPTO_DRIVER_TEST) |
| |
| psa_status_t mbedtls_transparent_test_driver_rsa_import_key( |
| const psa_key_attributes_t *attributes, |
| const uint8_t *data, size_t data_length, |
| uint8_t *key_buffer, size_t key_buffer_size, |
| size_t *key_buffer_length, size_t *bits ); |
| |
| psa_status_t mbedtls_transparent_test_driver_rsa_export_public_key( |
| const psa_key_attributes_t *attributes, |
| const uint8_t *key_buffer, size_t key_buffer_size, |
| uint8_t *data, size_t data_size, size_t *data_length ); |
| |
| psa_status_t mbedtls_transparent_test_driver_rsa_generate_key( |
| const psa_key_attributes_t *attributes, |
| uint8_t *key, size_t key_size, size_t *key_length ); |
| |
| psa_status_t mbedtls_transparent_test_driver_rsa_sign_hash( |
| const psa_key_attributes_t *attributes, |
| const uint8_t *key_buffer, size_t key_buffer_size, |
| psa_algorithm_t alg, const uint8_t *hash, size_t hash_length, |
| uint8_t *signature, size_t signature_size, size_t *signature_length ); |
| |
| psa_status_t mbedtls_transparent_test_driver_rsa_verify_hash( |
| const psa_key_attributes_t *attributes, |
| const uint8_t *key_buffer, size_t key_buffer_size, |
| psa_algorithm_t alg, const uint8_t *hash, size_t hash_length, |
| const uint8_t *signature, size_t signature_length ); |
| |
| #endif /* PSA_CRYPTO_DRIVER_TEST */ |
| |
| #endif /* PSA_CRYPTO_RSA_H */ |