blob: 0a7be805520192845de777acaf3e4766f7c839b2 [file] [log] [blame]
/*
* PSA hashing layer on top of Mbed TLS software crypto
*/
/*
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*/
#ifndef PSA_CRYPTO_HASH_H
#define PSA_CRYPTO_HASH_H
#include <psa/crypto.h>
/** Calculate the hash (digest) of a message using Mbed TLS routines.
*
* \note The signature of this function is that of a PSA driver hash_compute
* entry point. This function behaves as a hash_compute entry point as
* defined in the PSA driver interface specification for transparent
* drivers.
*
* \param alg The hash algorithm to compute (\c PSA_ALG_XXX value
* such that #PSA_ALG_IS_HASH(\p alg) is true).
* \param[in] input Buffer containing the message to hash.
* \param input_length Size of the \p input buffer in bytes.
* \param[out] hash Buffer where the hash is to be written.
* \param hash_size Size of the \p hash buffer in bytes.
* \param[out] hash_length On success, the number of bytes
* that make up the hash value. This is always
* #PSA_HASH_LENGTH(\p alg).
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_NOT_SUPPORTED
* \p alg is not supported
* \retval #PSA_ERROR_BUFFER_TOO_SMALL
* \p hash_size is too small
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
* \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
*/
psa_status_t mbedtls_psa_hash_compute(
psa_algorithm_t alg,
const uint8_t *input,
size_t input_length,
uint8_t *hash,
size_t hash_size,
size_t *hash_length);
/** Set up a multipart hash operation using Mbed TLS routines.
*
* \note The signature of this function is that of a PSA driver hash_setup
* entry point. This function behaves as a hash_setup entry point as
* defined in the PSA driver interface specification for transparent
* drivers.
*
* If an error occurs at any step after a call to mbedtls_psa_hash_setup(), the
* operation will need to be reset by a call to mbedtls_psa_hash_abort(). The
* core may call mbedtls_psa_hash_abort() at any time after the operation
* has been initialized.
*
* After a successful call to mbedtls_psa_hash_setup(), the core must
* eventually terminate the operation. The following events terminate an
* operation:
* - A successful call to mbedtls_psa_hash_finish() or mbedtls_psa_hash_verify().
* - A call to mbedtls_psa_hash_abort().
*
* \param[in,out] operation The operation object to set up. It must have
* been initialized to all-zero and not yet be in use.
* \param alg The hash algorithm to compute (\c PSA_ALG_XXX value
* such that #PSA_ALG_IS_HASH(\p alg) is true).
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_NOT_SUPPORTED
* \p alg is not supported
* \retval #PSA_ERROR_BAD_STATE
* The operation state is not valid (it must be inactive).
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
* \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
*/
psa_status_t mbedtls_psa_hash_setup(
mbedtls_psa_hash_operation_t *operation,
psa_algorithm_t alg);
/** Clone an Mbed TLS hash operation.
*
* \note The signature of this function is that of a PSA driver hash_clone
* entry point. This function behaves as a hash_clone entry point as
* defined in the PSA driver interface specification for transparent
* drivers.
*
* This function copies the state of an ongoing hash operation to
* a new operation object. In other words, this function is equivalent
* to calling mbedtls_psa_hash_setup() on \p target_operation with the same
* algorithm that \p source_operation was set up for, then
* mbedtls_psa_hash_update() on \p target_operation with the same input that
* that was passed to \p source_operation. After this function returns, the
* two objects are independent, i.e. subsequent calls involving one of
* the objects do not affect the other object.
*
* \param[in] source_operation The active hash operation to clone.
* \param[in,out] target_operation The operation object to set up.
* It must be initialized but not active.
*
* \retval #PSA_SUCCESS \emptydescription
* \retval #PSA_ERROR_BAD_STATE
* The \p source_operation state is not valid (it must be active).
* \retval #PSA_ERROR_BAD_STATE
* The \p target_operation state is not valid (it must be inactive).
* \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
*/
psa_status_t mbedtls_psa_hash_clone(
const mbedtls_psa_hash_operation_t *source_operation,
mbedtls_psa_hash_operation_t *target_operation);
/** Add a message fragment to a multipart Mbed TLS hash operation.
*
* \note The signature of this function is that of a PSA driver hash_update
* entry point. This function behaves as a hash_update entry point as
* defined in the PSA driver interface specification for transparent
* drivers.
*
* The application must call mbedtls_psa_hash_setup() before calling this function.
*
* If this function returns an error status, the operation enters an error
* state and must be aborted by calling mbedtls_psa_hash_abort().
*
* \param[in,out] operation Active hash operation.
* \param[in] input Buffer containing the message fragment to hash.
* \param input_length Size of the \p input buffer in bytes.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_BAD_STATE
* The operation state is not valid (it must be active).
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
* \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
*/
psa_status_t mbedtls_psa_hash_update(
mbedtls_psa_hash_operation_t *operation,
const uint8_t *input,
size_t input_length);
/** Finish the calculation of the Mbed TLS-calculated hash of a message.
*
* \note The signature of this function is that of a PSA driver hash_finish
* entry point. This function behaves as a hash_finish entry point as
* defined in the PSA driver interface specification for transparent
* drivers.
*
* The application must call mbedtls_psa_hash_setup() before calling this function.
* This function calculates the hash of the message formed by concatenating
* the inputs passed to preceding calls to mbedtls_psa_hash_update().
*
* When this function returns successfully, the operation becomes inactive.
* If this function returns an error status, the operation enters an error
* state and must be aborted by calling mbedtls_psa_hash_abort().
*
* \param[in,out] operation Active hash operation.
* \param[out] hash Buffer where the hash is to be written.
* \param hash_size Size of the \p hash buffer in bytes.
* \param[out] hash_length On success, the number of bytes
* that make up the hash value. This is always
* #PSA_HASH_LENGTH(\c alg) where \c alg is the
* hash algorithm that is calculated.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_BAD_STATE
* The operation state is not valid (it must be active).
* \retval #PSA_ERROR_BUFFER_TOO_SMALL
* The size of the \p hash buffer is too small. You can determine a
* sufficient buffer size by calling #PSA_HASH_LENGTH(\c alg)
* where \c alg is the hash algorithm that is calculated.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
* \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
*/
psa_status_t mbedtls_psa_hash_finish(
mbedtls_psa_hash_operation_t *operation,
uint8_t *hash,
size_t hash_size,
size_t *hash_length);
/** Abort an Mbed TLS hash operation.
*
* \note The signature of this function is that of a PSA driver hash_abort
* entry point. This function behaves as a hash_abort entry point as
* defined in the PSA driver interface specification for transparent
* drivers.
*
* Aborting an operation frees all associated resources except for the
* \p operation structure itself. Once aborted, the operation object
* can be reused for another operation by calling
* mbedtls_psa_hash_setup() again.
*
* You may call this function any time after the operation object has
* been initialized by one of the methods described in #psa_hash_operation_t.
*
* In particular, calling mbedtls_psa_hash_abort() after the operation has been
* terminated by a call to mbedtls_psa_hash_abort(), mbedtls_psa_hash_finish() or
* mbedtls_psa_hash_verify() is safe and has no effect.
*
* \param[in,out] operation Initialized hash operation.
*
* \retval #PSA_SUCCESS \emptydescription
* \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
*/
psa_status_t mbedtls_psa_hash_abort(
mbedtls_psa_hash_operation_t *operation);
#endif /* PSA_CRYPTO_HASH_H */