| /* | |
| * Generic SSL/TLS messaging layer functions | |
| * (record layer + retransmission state machine) | |
| * | |
| * Copyright The Mbed TLS Contributors | |
| * SPDX-License-Identifier: Apache-2.0 | |
| * | |
| * Licensed under the Apache License, Version 2.0 (the "License"); you may | |
| * not use this file except in compliance with the License. | |
| * You may obtain a copy of the License at | |
| * | |
| * http://www.apache.org/licenses/LICENSE-2.0 | |
| * | |
| * Unless required by applicable law or agreed to in writing, software | |
| * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT | |
| * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| * See the License for the specific language governing permissions and | |
| * limitations under the License. | |
| */ | |
| /* | |
| * http://www.ietf.org/rfc/rfc2246.txt | |
| * http://www.ietf.org/rfc/rfc4346.txt | |
| */ | |
| #include "common.h" | |
| #if defined(MBEDTLS_SSL_TLS_C) | |
| #include "mbedtls/platform.h" | |
| #include "mbedtls/ssl.h" | |
| #include "ssl_misc.h" | |
| #include "mbedtls/debug.h" | |
| #include "mbedtls/error.h" | |
| #include "mbedtls/platform_util.h" | |
| #include "mbedtls/version.h" | |
| #include "constant_time_internal.h" | |
| #include "mbedtls/constant_time.h" | |
| #include <string.h> | |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) | |
| #include "psa_util_internal.h" | |
| #include "psa/crypto.h" | |
| #endif | |
| #if defined(MBEDTLS_X509_CRT_PARSE_C) | |
| #include "mbedtls/oid.h" | |
| #endif | |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) | |
| /* Define a local translating function to save code size by not using too many | |
| * arguments in each translating place. */ | |
| static int local_err_translation(psa_status_t status) | |
| { | |
| return psa_status_to_mbedtls(status, psa_to_ssl_errors, | |
| ARRAY_LENGTH(psa_to_ssl_errors), | |
| psa_generic_status_to_mbedtls); | |
| } | |
| #define PSA_TO_MBEDTLS_ERR(status) local_err_translation(status) | |
| #endif | |
| #if defined(MBEDTLS_SSL_SOME_SUITES_USE_MAC) | |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) | |
| #if defined(PSA_WANT_ALG_SHA_384) | |
| #define MAX_HASH_BLOCK_LENGTH PSA_HASH_BLOCK_LENGTH(PSA_ALG_SHA_384) | |
| #elif defined(PSA_WANT_ALG_SHA_256) | |
| #define MAX_HASH_BLOCK_LENGTH PSA_HASH_BLOCK_LENGTH(PSA_ALG_SHA_256) | |
| #else /* See check_config.h */ | |
| #define MAX_HASH_BLOCK_LENGTH PSA_HASH_BLOCK_LENGTH(PSA_ALG_SHA_1) | |
| #endif | |
| MBEDTLS_STATIC_TESTABLE | |
| int mbedtls_ct_hmac(mbedtls_svc_key_id_t key, | |
| psa_algorithm_t mac_alg, | |
| const unsigned char *add_data, | |
| size_t add_data_len, | |
| const unsigned char *data, | |
| size_t data_len_secret, | |
| size_t min_data_len, | |
| size_t max_data_len, | |
| unsigned char *output) | |
| { | |
| /* | |
| * This function breaks the HMAC abstraction and uses psa_hash_clone() | |
| * extension in order to get constant-flow behaviour. | |
| * | |
| * HMAC(msg) is defined as HASH(okey + HASH(ikey + msg)) where + means | |
| * concatenation, and okey/ikey are the XOR of the key with some fixed bit | |
| * patterns (see RFC 2104, sec. 2). | |
| * | |
| * We'll first compute ikey/okey, then inner_hash = HASH(ikey + msg) by | |
| * hashing up to minlen, then cloning the context, and for each byte up | |
| * to maxlen finishing up the hash computation, keeping only the | |
| * correct result. | |
| * | |
| * Then we only need to compute HASH(okey + inner_hash) and we're done. | |
| */ | |
| psa_algorithm_t hash_alg = PSA_ALG_HMAC_GET_HASH(mac_alg); | |
| const size_t block_size = PSA_HASH_BLOCK_LENGTH(hash_alg); | |
| unsigned char key_buf[MAX_HASH_BLOCK_LENGTH]; | |
| const size_t hash_size = PSA_HASH_LENGTH(hash_alg); | |
| psa_hash_operation_t operation = PSA_HASH_OPERATION_INIT; | |
| size_t hash_length; | |
| unsigned char aux_out[PSA_HASH_MAX_SIZE]; | |
| psa_hash_operation_t aux_operation = PSA_HASH_OPERATION_INIT; | |
| size_t offset; | |
| psa_status_t status = PSA_ERROR_CORRUPTION_DETECTED; | |
| size_t mac_key_length; | |
| size_t i; | |
| #define PSA_CHK(func_call) \ | |
| do { \ | |
| status = (func_call); \ | |
| if (status != PSA_SUCCESS) \ | |
| goto cleanup; \ | |
| } while (0) | |
| /* Export MAC key | |
| * We assume key length is always exactly the output size | |
| * which is never more than the block size, thus we use block_size | |
| * as the key buffer size. | |
| */ | |
| PSA_CHK(psa_export_key(key, key_buf, block_size, &mac_key_length)); | |
| /* Calculate ikey */ | |
| for (i = 0; i < mac_key_length; i++) { | |
| key_buf[i] = (unsigned char) (key_buf[i] ^ 0x36); | |
| } | |
| for (; i < block_size; ++i) { | |
| key_buf[i] = 0x36; | |
| } | |
| PSA_CHK(psa_hash_setup(&operation, hash_alg)); | |
| /* Now compute inner_hash = HASH(ikey + msg) */ | |
| PSA_CHK(psa_hash_update(&operation, key_buf, block_size)); | |
| PSA_CHK(psa_hash_update(&operation, add_data, add_data_len)); | |
| PSA_CHK(psa_hash_update(&operation, data, min_data_len)); | |
| /* Fill the hash buffer in advance with something that is | |
| * not a valid hash (barring an attack on the hash and | |
| * deliberately-crafted input), in case the caller doesn't | |
| * check the return status properly. */ | |
| memset(output, '!', hash_size); | |
| /* For each possible length, compute the hash up to that point */ | |
| for (offset = min_data_len; offset <= max_data_len; offset++) { | |
| PSA_CHK(psa_hash_clone(&operation, &aux_operation)); | |
| PSA_CHK(psa_hash_finish(&aux_operation, aux_out, | |
| PSA_HASH_MAX_SIZE, &hash_length)); | |
| /* Keep only the correct inner_hash in the output buffer */ | |
| mbedtls_ct_memcpy_if(mbedtls_ct_uint_eq(offset, data_len_secret), | |
| output, aux_out, NULL, hash_size); | |
| if (offset < max_data_len) { | |
| PSA_CHK(psa_hash_update(&operation, data + offset, 1)); | |
| } | |
| } | |
| /* Abort current operation to prepare for final operation */ | |
| PSA_CHK(psa_hash_abort(&operation)); | |
| /* Calculate okey */ | |
| for (i = 0; i < mac_key_length; i++) { | |
| key_buf[i] = (unsigned char) ((key_buf[i] ^ 0x36) ^ 0x5C); | |
| } | |
| for (; i < block_size; ++i) { | |
| key_buf[i] = 0x5C; | |
| } | |
| /* Now compute HASH(okey + inner_hash) */ | |
| PSA_CHK(psa_hash_setup(&operation, hash_alg)); | |
| PSA_CHK(psa_hash_update(&operation, key_buf, block_size)); | |
| PSA_CHK(psa_hash_update(&operation, output, hash_size)); | |
| PSA_CHK(psa_hash_finish(&operation, output, hash_size, &hash_length)); | |
| #undef PSA_CHK | |
| cleanup: | |
| mbedtls_platform_zeroize(key_buf, MAX_HASH_BLOCK_LENGTH); | |
| mbedtls_platform_zeroize(aux_out, PSA_HASH_MAX_SIZE); | |
| psa_hash_abort(&operation); | |
| psa_hash_abort(&aux_operation); | |
| return PSA_TO_MBEDTLS_ERR(status); | |
| } | |
| #undef MAX_HASH_BLOCK_LENGTH | |
| #else | |
| MBEDTLS_STATIC_TESTABLE | |
| int mbedtls_ct_hmac(mbedtls_md_context_t *ctx, | |
| const unsigned char *add_data, | |
| size_t add_data_len, | |
| const unsigned char *data, | |
| size_t data_len_secret, | |
| size_t min_data_len, | |
| size_t max_data_len, | |
| unsigned char *output) | |
| { | |
| /* | |
| * This function breaks the HMAC abstraction and uses the md_clone() | |
| * extension to the MD API in order to get constant-flow behaviour. | |
| * | |
| * HMAC(msg) is defined as HASH(okey + HASH(ikey + msg)) where + means | |
| * concatenation, and okey/ikey are the XOR of the key with some fixed bit | |
| * patterns (see RFC 2104, sec. 2), which are stored in ctx->hmac_ctx. | |
| * | |
| * We'll first compute inner_hash = HASH(ikey + msg) by hashing up to | |
| * minlen, then cloning the context, and for each byte up to maxlen | |
| * finishing up the hash computation, keeping only the correct result. | |
| * | |
| * Then we only need to compute HASH(okey + inner_hash) and we're done. | |
| */ | |
| const mbedtls_md_type_t md_alg = mbedtls_md_get_type(ctx->md_info); | |
| /* TLS 1.2 only supports SHA-384, SHA-256, SHA-1, MD-5, | |
| * all of which have the same block size except SHA-384. */ | |
| const size_t block_size = md_alg == MBEDTLS_MD_SHA384 ? 128 : 64; | |
| const unsigned char * const ikey = ctx->hmac_ctx; | |
| const unsigned char * const okey = ikey + block_size; | |
| const size_t hash_size = mbedtls_md_get_size(ctx->md_info); | |
| unsigned char aux_out[MBEDTLS_MD_MAX_SIZE]; | |
| mbedtls_md_context_t aux; | |
| size_t offset; | |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; | |
| mbedtls_md_init(&aux); | |
| #define MD_CHK(func_call) \ | |
| do { \ | |
| ret = (func_call); \ | |
| if (ret != 0) \ | |
| goto cleanup; \ | |
| } while (0) | |
| MD_CHK(mbedtls_md_setup(&aux, ctx->md_info, 0)); | |
| /* After hmac_start() of hmac_reset(), ikey has already been hashed, | |
| * so we can start directly with the message */ | |
| MD_CHK(mbedtls_md_update(ctx, add_data, add_data_len)); | |
| MD_CHK(mbedtls_md_update(ctx, data, min_data_len)); | |
| /* Fill the hash buffer in advance with something that is | |
| * not a valid hash (barring an attack on the hash and | |
| * deliberately-crafted input), in case the caller doesn't | |
| * check the return status properly. */ | |
| memset(output, '!', hash_size); | |
| /* For each possible length, compute the hash up to that point */ | |
| for (offset = min_data_len; offset <= max_data_len; offset++) { | |
| MD_CHK(mbedtls_md_clone(&aux, ctx)); | |
| MD_CHK(mbedtls_md_finish(&aux, aux_out)); | |
| /* Keep only the correct inner_hash in the output buffer */ | |
| mbedtls_ct_memcpy_if(mbedtls_ct_uint_eq(offset, data_len_secret), | |
| output, aux_out, NULL, hash_size); | |
| if (offset < max_data_len) { | |
| MD_CHK(mbedtls_md_update(ctx, data + offset, 1)); | |
| } | |
| } | |
| /* The context needs to finish() before it starts() again */ | |
| MD_CHK(mbedtls_md_finish(ctx, aux_out)); | |
| /* Now compute HASH(okey + inner_hash) */ | |
| MD_CHK(mbedtls_md_starts(ctx)); | |
| MD_CHK(mbedtls_md_update(ctx, okey, block_size)); | |
| MD_CHK(mbedtls_md_update(ctx, output, hash_size)); | |
| MD_CHK(mbedtls_md_finish(ctx, output)); | |
| /* Done, get ready for next time */ | |
| MD_CHK(mbedtls_md_hmac_reset(ctx)); | |
| #undef MD_CHK | |
| cleanup: | |
| mbedtls_md_free(&aux); | |
| return ret; | |
| } | |
| #endif /* MBEDTLS_USE_PSA_CRYPTO */ | |
| #endif /* MBEDTLS_SSL_SOME_SUITES_USE_MAC */ | |
| static uint32_t ssl_get_hs_total_len(mbedtls_ssl_context const *ssl); | |
| /* | |
| * Start a timer. | |
| * Passing millisecs = 0 cancels a running timer. | |
| */ | |
| void mbedtls_ssl_set_timer(mbedtls_ssl_context *ssl, uint32_t millisecs) | |
| { | |
| if (ssl->f_set_timer == NULL) { | |
| return; | |
| } | |
| MBEDTLS_SSL_DEBUG_MSG(3, ("set_timer to %d ms", (int) millisecs)); | |
| ssl->f_set_timer(ssl->p_timer, millisecs / 4, millisecs); | |
| } | |
| /* | |
| * Return -1 is timer is expired, 0 if it isn't. | |
| */ | |
| int mbedtls_ssl_check_timer(mbedtls_ssl_context *ssl) | |
| { | |
| if (ssl->f_get_timer == NULL) { | |
| return 0; | |
| } | |
| if (ssl->f_get_timer(ssl->p_timer) == 2) { | |
| MBEDTLS_SSL_DEBUG_MSG(3, ("timer expired")); | |
| return -1; | |
| } | |
| return 0; | |
| } | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_parse_record_header(mbedtls_ssl_context const *ssl, | |
| unsigned char *buf, | |
| size_t len, | |
| mbedtls_record *rec); | |
| int mbedtls_ssl_check_record(mbedtls_ssl_context const *ssl, | |
| unsigned char *buf, | |
| size_t buflen) | |
| { | |
| int ret = 0; | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("=> mbedtls_ssl_check_record")); | |
| MBEDTLS_SSL_DEBUG_BUF(3, "record buffer", buf, buflen); | |
| /* We don't support record checking in TLS because | |
| * there doesn't seem to be a usecase for it. | |
| */ | |
| if (ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_STREAM) { | |
| ret = MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE; | |
| goto exit; | |
| } | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| else { | |
| mbedtls_record rec; | |
| ret = ssl_parse_record_header(ssl, buf, buflen, &rec); | |
| if (ret != 0) { | |
| MBEDTLS_SSL_DEBUG_RET(3, "ssl_parse_record_header", ret); | |
| goto exit; | |
| } | |
| if (ssl->transform_in != NULL) { | |
| ret = mbedtls_ssl_decrypt_buf(ssl, ssl->transform_in, &rec); | |
| if (ret != 0) { | |
| MBEDTLS_SSL_DEBUG_RET(3, "mbedtls_ssl_decrypt_buf", ret); | |
| goto exit; | |
| } | |
| } | |
| } | |
| #endif /* MBEDTLS_SSL_PROTO_DTLS */ | |
| exit: | |
| /* On success, we have decrypted the buffer in-place, so make | |
| * sure we don't leak any plaintext data. */ | |
| mbedtls_platform_zeroize(buf, buflen); | |
| /* For the purpose of this API, treat messages with unexpected CID | |
| * as well as such from future epochs as unexpected. */ | |
| if (ret == MBEDTLS_ERR_SSL_UNEXPECTED_CID || | |
| ret == MBEDTLS_ERR_SSL_EARLY_MESSAGE) { | |
| ret = MBEDTLS_ERR_SSL_UNEXPECTED_RECORD; | |
| } | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("<= mbedtls_ssl_check_record")); | |
| return ret; | |
| } | |
| #define SSL_DONT_FORCE_FLUSH 0 | |
| #define SSL_FORCE_FLUSH 1 | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| /* Forward declarations for functions related to message buffering. */ | |
| static void ssl_buffering_free_slot(mbedtls_ssl_context *ssl, | |
| uint8_t slot); | |
| static void ssl_free_buffered_record(mbedtls_ssl_context *ssl); | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_load_buffered_message(mbedtls_ssl_context *ssl); | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_load_buffered_record(mbedtls_ssl_context *ssl); | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_buffer_message(mbedtls_ssl_context *ssl); | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_buffer_future_record(mbedtls_ssl_context *ssl, | |
| mbedtls_record const *rec); | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_next_record_is_in_datagram(mbedtls_ssl_context *ssl); | |
| static size_t ssl_get_maximum_datagram_size(mbedtls_ssl_context const *ssl) | |
| { | |
| size_t mtu = mbedtls_ssl_get_current_mtu(ssl); | |
| #if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH) | |
| size_t out_buf_len = ssl->out_buf_len; | |
| #else | |
| size_t out_buf_len = MBEDTLS_SSL_OUT_BUFFER_LEN; | |
| #endif | |
| if (mtu != 0 && mtu < out_buf_len) { | |
| return mtu; | |
| } | |
| return out_buf_len; | |
| } | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_get_remaining_space_in_datagram(mbedtls_ssl_context const *ssl) | |
| { | |
| size_t const bytes_written = ssl->out_left; | |
| size_t const mtu = ssl_get_maximum_datagram_size(ssl); | |
| /* Double-check that the write-index hasn't gone | |
| * past what we can transmit in a single datagram. */ | |
| if (bytes_written > mtu) { | |
| /* Should never happen... */ | |
| return MBEDTLS_ERR_SSL_INTERNAL_ERROR; | |
| } | |
| return (int) (mtu - bytes_written); | |
| } | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_get_remaining_payload_in_datagram(mbedtls_ssl_context const *ssl) | |
| { | |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; | |
| size_t remaining, expansion; | |
| size_t max_len = MBEDTLS_SSL_OUT_CONTENT_LEN; | |
| #if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH) | |
| const size_t mfl = mbedtls_ssl_get_output_max_frag_len(ssl); | |
| if (max_len > mfl) { | |
| max_len = mfl; | |
| } | |
| /* By the standard (RFC 6066 Sect. 4), the MFL extension | |
| * only limits the maximum record payload size, so in theory | |
| * we would be allowed to pack multiple records of payload size | |
| * MFL into a single datagram. However, this would mean that there's | |
| * no way to explicitly communicate MTU restrictions to the peer. | |
| * | |
| * The following reduction of max_len makes sure that we never | |
| * write datagrams larger than MFL + Record Expansion Overhead. | |
| */ | |
| if (max_len <= ssl->out_left) { | |
| return 0; | |
| } | |
| max_len -= ssl->out_left; | |
| #endif | |
| ret = ssl_get_remaining_space_in_datagram(ssl); | |
| if (ret < 0) { | |
| return ret; | |
| } | |
| remaining = (size_t) ret; | |
| ret = mbedtls_ssl_get_record_expansion(ssl); | |
| if (ret < 0) { | |
| return ret; | |
| } | |
| expansion = (size_t) ret; | |
| if (remaining <= expansion) { | |
| return 0; | |
| } | |
| remaining -= expansion; | |
| if (remaining >= max_len) { | |
| remaining = max_len; | |
| } | |
| return (int) remaining; | |
| } | |
| /* | |
| * Double the retransmit timeout value, within the allowed range, | |
| * returning -1 if the maximum value has already been reached. | |
| */ | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_double_retransmit_timeout(mbedtls_ssl_context *ssl) | |
| { | |
| uint32_t new_timeout; | |
| if (ssl->handshake->retransmit_timeout >= ssl->conf->hs_timeout_max) { | |
| return -1; | |
| } | |
| /* Implement the final paragraph of RFC 6347 section 4.1.1.1 | |
| * in the following way: after the initial transmission and a first | |
| * retransmission, back off to a temporary estimated MTU of 508 bytes. | |
| * This value is guaranteed to be deliverable (if not guaranteed to be | |
| * delivered) of any compliant IPv4 (and IPv6) network, and should work | |
| * on most non-IP stacks too. */ | |
| if (ssl->handshake->retransmit_timeout != ssl->conf->hs_timeout_min) { | |
| ssl->handshake->mtu = 508; | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("mtu autoreduction to %d bytes", ssl->handshake->mtu)); | |
| } | |
| new_timeout = 2 * ssl->handshake->retransmit_timeout; | |
| /* Avoid arithmetic overflow and range overflow */ | |
| if (new_timeout < ssl->handshake->retransmit_timeout || | |
| new_timeout > ssl->conf->hs_timeout_max) { | |
| new_timeout = ssl->conf->hs_timeout_max; | |
| } | |
| ssl->handshake->retransmit_timeout = new_timeout; | |
| MBEDTLS_SSL_DEBUG_MSG(3, ("update timeout value to %lu millisecs", | |
| (unsigned long) ssl->handshake->retransmit_timeout)); | |
| return 0; | |
| } | |
| static void ssl_reset_retransmit_timeout(mbedtls_ssl_context *ssl) | |
| { | |
| ssl->handshake->retransmit_timeout = ssl->conf->hs_timeout_min; | |
| MBEDTLS_SSL_DEBUG_MSG(3, ("update timeout value to %lu millisecs", | |
| (unsigned long) ssl->handshake->retransmit_timeout)); | |
| } | |
| #endif /* MBEDTLS_SSL_PROTO_DTLS */ | |
| /* | |
| * Encryption/decryption functions | |
| */ | |
| #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) || defined(MBEDTLS_SSL_PROTO_TLS1_3) | |
| static size_t ssl_compute_padding_length(size_t len, | |
| size_t granularity) | |
| { | |
| return (granularity - (len + 1) % granularity) % granularity; | |
| } | |
| /* This functions transforms a (D)TLS plaintext fragment and a record content | |
| * type into an instance of the (D)TLSInnerPlaintext structure. This is used | |
| * in DTLS 1.2 + CID and within TLS 1.3 to allow flexible padding and to protect | |
| * a record's content type. | |
| * | |
| * struct { | |
| * opaque content[DTLSPlaintext.length]; | |
| * ContentType real_type; | |
| * uint8 zeros[length_of_padding]; | |
| * } (D)TLSInnerPlaintext; | |
| * | |
| * Input: | |
| * - `content`: The beginning of the buffer holding the | |
| * plaintext to be wrapped. | |
| * - `*content_size`: The length of the plaintext in Bytes. | |
| * - `max_len`: The number of Bytes available starting from | |
| * `content`. This must be `>= *content_size`. | |
| * - `rec_type`: The desired record content type. | |
| * | |
| * Output: | |
| * - `content`: The beginning of the resulting (D)TLSInnerPlaintext structure. | |
| * - `*content_size`: The length of the resulting (D)TLSInnerPlaintext structure. | |
| * | |
| * Returns: | |
| * - `0` on success. | |
| * - A negative error code if `max_len` didn't offer enough space | |
| * for the expansion. | |
| */ | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_build_inner_plaintext(unsigned char *content, | |
| size_t *content_size, | |
| size_t remaining, | |
| uint8_t rec_type, | |
| size_t pad) | |
| { | |
| size_t len = *content_size; | |
| /* Write real content type */ | |
| if (remaining == 0) { | |
| return -1; | |
| } | |
| content[len] = rec_type; | |
| len++; | |
| remaining--; | |
| if (remaining < pad) { | |
| return -1; | |
| } | |
| memset(content + len, 0, pad); | |
| len += pad; | |
| remaining -= pad; | |
| *content_size = len; | |
| return 0; | |
| } | |
| /* This function parses a (D)TLSInnerPlaintext structure. | |
| * See ssl_build_inner_plaintext() for details. */ | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_parse_inner_plaintext(unsigned char const *content, | |
| size_t *content_size, | |
| uint8_t *rec_type) | |
| { | |
| size_t remaining = *content_size; | |
| /* Determine length of padding by skipping zeroes from the back. */ | |
| do { | |
| if (remaining == 0) { | |
| return -1; | |
| } | |
| remaining--; | |
| } while (content[remaining] == 0); | |
| *content_size = remaining; | |
| *rec_type = content[remaining]; | |
| return 0; | |
| } | |
| #endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID || MBEDTLS_SSL_PROTO_TLS1_3 */ | |
| /* The size of the `add_data` structure depends on various | |
| * factors, namely | |
| * | |
| * 1) CID functionality disabled | |
| * | |
| * additional_data = | |
| * 8: seq_num + | |
| * 1: type + | |
| * 2: version + | |
| * 2: length of inner plaintext + | |
| * | |
| * size = 13 bytes | |
| * | |
| * 2) CID functionality based on RFC 9146 enabled | |
| * | |
| * size = 8 + 1 + 1 + 1 + 2 + 2 + 6 + 2 + CID-length | |
| * = 23 + CID-length | |
| * | |
| * 3) CID functionality based on legacy CID version | |
| according to draft-ietf-tls-dtls-connection-id-05 | |
| * https://tools.ietf.org/html/draft-ietf-tls-dtls-connection-id-05 | |
| * | |
| * size = 13 + 1 + CID-length | |
| * | |
| * More information about the CID usage: | |
| * | |
| * Per Section 5.3 of draft-ietf-tls-dtls-connection-id-05 the | |
| * size of the additional data structure is calculated as: | |
| * | |
| * additional_data = | |
| * 8: seq_num + | |
| * 1: tls12_cid + | |
| * 2: DTLSCipherText.version + | |
| * n: cid + | |
| * 1: cid_length + | |
| * 2: length_of_DTLSInnerPlaintext | |
| * | |
| * Per RFC 9146 the size of the add_data structure is calculated as: | |
| * | |
| * additional_data = | |
| * 8: seq_num_placeholder + | |
| * 1: tls12_cid + | |
| * 1: cid_length + | |
| * 1: tls12_cid + | |
| * 2: DTLSCiphertext.version + | |
| * 2: epoch + | |
| * 6: sequence_number + | |
| * n: cid + | |
| * 2: length_of_DTLSInnerPlaintext | |
| * | |
| */ | |
| static void ssl_extract_add_data_from_record(unsigned char *add_data, | |
| size_t *add_data_len, | |
| mbedtls_record *rec, | |
| mbedtls_ssl_protocol_version | |
| tls_version, | |
| size_t taglen) | |
| { | |
| /* Several types of ciphers have been defined for use with TLS and DTLS, | |
| * and the MAC calculations for those ciphers differ slightly. Further | |
| * variants were added when the CID functionality was added with RFC 9146. | |
| * This implementations also considers the use of a legacy version of the | |
| * CID specification published in draft-ietf-tls-dtls-connection-id-05, | |
| * which is used in deployments. | |
| * | |
| * We will distinguish between the non-CID and the CID cases below. | |
| * | |
| * --- Non-CID cases --- | |
| * | |
| * Quoting RFC 5246 (TLS 1.2): | |
| * | |
| * additional_data = seq_num + TLSCompressed.type + | |
| * TLSCompressed.version + TLSCompressed.length; | |
| * | |
| * For TLS 1.3, the record sequence number is dropped from the AAD | |
| * and encoded within the nonce of the AEAD operation instead. | |
| * Moreover, the additional data involves the length of the TLS | |
| * ciphertext, not the TLS plaintext as in earlier versions. | |
| * Quoting RFC 8446 (TLS 1.3): | |
| * | |
| * additional_data = TLSCiphertext.opaque_type || | |
| * TLSCiphertext.legacy_record_version || | |
| * TLSCiphertext.length | |
| * | |
| * We pass the tag length to this function in order to compute the | |
| * ciphertext length from the inner plaintext length rec->data_len via | |
| * | |
| * TLSCiphertext.length = TLSInnerPlaintext.length + taglen. | |
| * | |
| * --- CID cases --- | |
| * | |
| * RFC 9146 uses a common pattern when constructing the data | |
| * passed into a MAC / AEAD cipher. | |
| * | |
| * Data concatenation for MACs used with block ciphers with | |
| * Encrypt-then-MAC Processing (with CID): | |
| * | |
| * data = seq_num_placeholder + | |
| * tls12_cid + | |
| * cid_length + | |
| * tls12_cid + | |
| * DTLSCiphertext.version + | |
| * epoch + | |
| * sequence_number + | |
| * cid + | |
| * DTLSCiphertext.length + | |
| * IV + | |
| * ENC(content + padding + padding_length) | |
| * | |
| * Data concatenation for MACs used with block ciphers (with CID): | |
| * | |
| * data = seq_num_placeholder + | |
| * tls12_cid + | |
| * cid_length + | |
| * tls12_cid + | |
| * DTLSCiphertext.version + | |
| * epoch + | |
| * sequence_number + | |
| * cid + | |
| * length_of_DTLSInnerPlaintext + | |
| * DTLSInnerPlaintext.content + | |
| * DTLSInnerPlaintext.real_type + | |
| * DTLSInnerPlaintext.zeros | |
| * | |
| * AEAD ciphers use the following additional data calculation (with CIDs): | |
| * | |
| * additional_data = seq_num_placeholder + | |
| * tls12_cid + | |
| * cid_length + | |
| * tls12_cid + | |
| * DTLSCiphertext.version + | |
| * epoch + | |
| * sequence_number + | |
| * cid + | |
| * length_of_DTLSInnerPlaintext | |
| * | |
| * Section 5.3 of draft-ietf-tls-dtls-connection-id-05 (for legacy CID use) | |
| * defines the additional data calculation as follows: | |
| * | |
| * additional_data = seq_num + | |
| * tls12_cid + | |
| * DTLSCipherText.version + | |
| * cid + | |
| * cid_length + | |
| * length_of_DTLSInnerPlaintext | |
| */ | |
| unsigned char *cur = add_data; | |
| size_t ad_len_field = rec->data_len; | |
| #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) && \ | |
| MBEDTLS_SSL_DTLS_CONNECTION_ID_COMPAT == 0 | |
| const unsigned char seq_num_placeholder[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; | |
| #endif | |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_3) | |
| if (tls_version == MBEDTLS_SSL_VERSION_TLS1_3) { | |
| /* In TLS 1.3, the AAD contains the length of the TLSCiphertext, | |
| * which differs from the length of the TLSInnerPlaintext | |
| * by the length of the authentication tag. */ | |
| ad_len_field += taglen; | |
| } else | |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_3 */ | |
| { | |
| ((void) tls_version); | |
| ((void) taglen); | |
| #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) && \ | |
| MBEDTLS_SSL_DTLS_CONNECTION_ID_COMPAT == 0 | |
| if (rec->cid_len != 0) { | |
| // seq_num_placeholder | |
| memcpy(cur, seq_num_placeholder, sizeof(seq_num_placeholder)); | |
| cur += sizeof(seq_num_placeholder); | |
| // tls12_cid type | |
| *cur = rec->type; | |
| cur++; | |
| // cid_length | |
| *cur = rec->cid_len; | |
| cur++; | |
| } else | |
| #endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ | |
| { | |
| // epoch + sequence number | |
| memcpy(cur, rec->ctr, sizeof(rec->ctr)); | |
| cur += sizeof(rec->ctr); | |
| } | |
| } | |
| // type | |
| *cur = rec->type; | |
| cur++; | |
| // version | |
| memcpy(cur, rec->ver, sizeof(rec->ver)); | |
| cur += sizeof(rec->ver); | |
| #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) && \ | |
| MBEDTLS_SSL_DTLS_CONNECTION_ID_COMPAT == 1 | |
| if (rec->cid_len != 0) { | |
| // CID | |
| memcpy(cur, rec->cid, rec->cid_len); | |
| cur += rec->cid_len; | |
| // cid_length | |
| *cur = rec->cid_len; | |
| cur++; | |
| // length of inner plaintext | |
| MBEDTLS_PUT_UINT16_BE(ad_len_field, cur, 0); | |
| cur += 2; | |
| } else | |
| #elif defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) && \ | |
| MBEDTLS_SSL_DTLS_CONNECTION_ID_COMPAT == 0 | |
| if (rec->cid_len != 0) { | |
| // epoch + sequence number | |
| memcpy(cur, rec->ctr, sizeof(rec->ctr)); | |
| cur += sizeof(rec->ctr); | |
| // CID | |
| memcpy(cur, rec->cid, rec->cid_len); | |
| cur += rec->cid_len; | |
| // length of inner plaintext | |
| MBEDTLS_PUT_UINT16_BE(ad_len_field, cur, 0); | |
| cur += 2; | |
| } else | |
| #endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ | |
| { | |
| MBEDTLS_PUT_UINT16_BE(ad_len_field, cur, 0); | |
| cur += 2; | |
| } | |
| *add_data_len = cur - add_data; | |
| } | |
| #if defined(MBEDTLS_GCM_C) || \ | |
| defined(MBEDTLS_CCM_C) || \ | |
| defined(MBEDTLS_CHACHAPOLY_C) | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_transform_aead_dynamic_iv_is_explicit( | |
| mbedtls_ssl_transform const *transform) | |
| { | |
| return transform->ivlen != transform->fixed_ivlen; | |
| } | |
| /* Compute IV := ( fixed_iv || 0 ) XOR ( 0 || dynamic_IV ) | |
| * | |
| * Concretely, this occurs in two variants: | |
| * | |
| * a) Fixed and dynamic IV lengths add up to total IV length, giving | |
| * IV = fixed_iv || dynamic_iv | |
| * | |
| * This variant is used in TLS 1.2 when used with GCM or CCM. | |
| * | |
| * b) Fixed IV lengths matches total IV length, giving | |
| * IV = fixed_iv XOR ( 0 || dynamic_iv ) | |
| * | |
| * This variant occurs in TLS 1.3 and for TLS 1.2 when using ChaChaPoly. | |
| * | |
| * See also the documentation of mbedtls_ssl_transform. | |
| * | |
| * This function has the precondition that | |
| * | |
| * dst_iv_len >= max( fixed_iv_len, dynamic_iv_len ) | |
| * | |
| * which has to be ensured by the caller. If this precondition | |
| * violated, the behavior of this function is undefined. | |
| */ | |
| static void ssl_build_record_nonce(unsigned char *dst_iv, | |
| size_t dst_iv_len, | |
| unsigned char const *fixed_iv, | |
| size_t fixed_iv_len, | |
| unsigned char const *dynamic_iv, | |
| size_t dynamic_iv_len) | |
| { | |
| /* Start with Fixed IV || 0 */ | |
| memset(dst_iv, 0, dst_iv_len); | |
| memcpy(dst_iv, fixed_iv, fixed_iv_len); | |
| dst_iv += dst_iv_len - dynamic_iv_len; | |
| mbedtls_xor(dst_iv, dst_iv, dynamic_iv, dynamic_iv_len); | |
| } | |
| #endif /* MBEDTLS_GCM_C || MBEDTLS_CCM_C || MBEDTLS_CHACHAPOLY_C */ | |
| int mbedtls_ssl_encrypt_buf(mbedtls_ssl_context *ssl, | |
| mbedtls_ssl_transform *transform, | |
| mbedtls_record *rec, | |
| int (*f_rng)(void *, unsigned char *, size_t), | |
| void *p_rng) | |
| { | |
| mbedtls_ssl_mode_t ssl_mode; | |
| int auth_done = 0; | |
| unsigned char *data; | |
| /* For an explanation of the additional data length see | |
| * the description of ssl_extract_add_data_from_record(). | |
| */ | |
| #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) | |
| unsigned char add_data[23 + MBEDTLS_SSL_CID_OUT_LEN_MAX]; | |
| #else | |
| unsigned char add_data[13]; | |
| #endif | |
| size_t add_data_len; | |
| size_t post_avail; | |
| /* The SSL context is only used for debugging purposes! */ | |
| #if !defined(MBEDTLS_DEBUG_C) | |
| ssl = NULL; /* make sure we don't use it except for debug */ | |
| ((void) ssl); | |
| #endif | |
| /* The PRNG is used for dynamic IV generation that's used | |
| * for CBC transformations in TLS 1.2. */ | |
| #if !(defined(MBEDTLS_SSL_SOME_SUITES_USE_CBC) && \ | |
| defined(MBEDTLS_SSL_PROTO_TLS1_2)) | |
| ((void) f_rng); | |
| ((void) p_rng); | |
| #endif | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("=> encrypt buf")); | |
| if (transform == NULL) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("no transform provided to encrypt_buf")); | |
| return MBEDTLS_ERR_SSL_INTERNAL_ERROR; | |
| } | |
| if (rec == NULL | |
| || rec->buf == NULL | |
| || rec->buf_len < rec->data_offset | |
| || rec->buf_len - rec->data_offset < rec->data_len | |
| #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) | |
| || rec->cid_len != 0 | |
| #endif | |
| ) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("bad record structure provided to encrypt_buf")); | |
| return MBEDTLS_ERR_SSL_INTERNAL_ERROR; | |
| } | |
| ssl_mode = mbedtls_ssl_get_mode_from_transform(transform); | |
| data = rec->buf + rec->data_offset; | |
| post_avail = rec->buf_len - (rec->data_len + rec->data_offset); | |
| MBEDTLS_SSL_DEBUG_BUF(4, "before encrypt: output payload", | |
| data, rec->data_len); | |
| if (rec->data_len > MBEDTLS_SSL_OUT_CONTENT_LEN) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("Record content %" MBEDTLS_PRINTF_SIZET | |
| " too large, maximum %" MBEDTLS_PRINTF_SIZET, | |
| rec->data_len, | |
| (size_t) MBEDTLS_SSL_OUT_CONTENT_LEN)); | |
| return MBEDTLS_ERR_SSL_BAD_INPUT_DATA; | |
| } | |
| /* The following two code paths implement the (D)TLSInnerPlaintext | |
| * structure present in TLS 1.3 and DTLS 1.2 + CID. | |
| * | |
| * See ssl_build_inner_plaintext() for more information. | |
| * | |
| * Note that this changes `rec->data_len`, and hence | |
| * `post_avail` needs to be recalculated afterwards. | |
| * | |
| * Note also that the two code paths cannot occur simultaneously | |
| * since they apply to different versions of the protocol. There | |
| * is hence no risk of double-addition of the inner plaintext. | |
| */ | |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_3) | |
| if (transform->tls_version == MBEDTLS_SSL_VERSION_TLS1_3) { | |
| size_t padding = | |
| ssl_compute_padding_length(rec->data_len, | |
| MBEDTLS_SSL_CID_TLS1_3_PADDING_GRANULARITY); | |
| if (ssl_build_inner_plaintext(data, | |
| &rec->data_len, | |
| post_avail, | |
| rec->type, | |
| padding) != 0) { | |
| return MBEDTLS_ERR_SSL_BUFFER_TOO_SMALL; | |
| } | |
| rec->type = MBEDTLS_SSL_MSG_APPLICATION_DATA; | |
| } | |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_3 */ | |
| #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) | |
| /* | |
| * Add CID information | |
| */ | |
| rec->cid_len = transform->out_cid_len; | |
| memcpy(rec->cid, transform->out_cid, transform->out_cid_len); | |
| MBEDTLS_SSL_DEBUG_BUF(3, "CID", rec->cid, rec->cid_len); | |
| if (rec->cid_len != 0) { | |
| size_t padding = | |
| ssl_compute_padding_length(rec->data_len, | |
| MBEDTLS_SSL_CID_TLS1_3_PADDING_GRANULARITY); | |
| /* | |
| * Wrap plaintext into DTLSInnerPlaintext structure. | |
| * See ssl_build_inner_plaintext() for more information. | |
| * | |
| * Note that this changes `rec->data_len`, and hence | |
| * `post_avail` needs to be recalculated afterwards. | |
| */ | |
| if (ssl_build_inner_plaintext(data, | |
| &rec->data_len, | |
| post_avail, | |
| rec->type, | |
| padding) != 0) { | |
| return MBEDTLS_ERR_SSL_BUFFER_TOO_SMALL; | |
| } | |
| rec->type = MBEDTLS_SSL_MSG_CID; | |
| } | |
| #endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ | |
| post_avail = rec->buf_len - (rec->data_len + rec->data_offset); | |
| /* | |
| * Add MAC before if needed | |
| */ | |
| #if defined(MBEDTLS_SSL_SOME_SUITES_USE_MAC) | |
| if (ssl_mode == MBEDTLS_SSL_MODE_STREAM || | |
| ssl_mode == MBEDTLS_SSL_MODE_CBC) { | |
| if (post_avail < transform->maclen) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("Buffer provided for encrypted record not large enough")); | |
| return MBEDTLS_ERR_SSL_BUFFER_TOO_SMALL; | |
| } | |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_2) | |
| unsigned char mac[MBEDTLS_SSL_MAC_ADD]; | |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; | |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) | |
| psa_mac_operation_t operation = PSA_MAC_OPERATION_INIT; | |
| psa_status_t status = PSA_ERROR_CORRUPTION_DETECTED; | |
| size_t sign_mac_length = 0; | |
| #endif /* MBEDTLS_USE_PSA_CRYPTO */ | |
| ssl_extract_add_data_from_record(add_data, &add_data_len, rec, | |
| transform->tls_version, | |
| transform->taglen); | |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) | |
| status = psa_mac_sign_setup(&operation, transform->psa_mac_enc, | |
| transform->psa_mac_alg); | |
| if (status != PSA_SUCCESS) { | |
| goto hmac_failed_etm_disabled; | |
| } | |
| status = psa_mac_update(&operation, add_data, add_data_len); | |
| if (status != PSA_SUCCESS) { | |
| goto hmac_failed_etm_disabled; | |
| } | |
| status = psa_mac_update(&operation, data, rec->data_len); | |
| if (status != PSA_SUCCESS) { | |
| goto hmac_failed_etm_disabled; | |
| } | |
| status = psa_mac_sign_finish(&operation, mac, MBEDTLS_SSL_MAC_ADD, | |
| &sign_mac_length); | |
| if (status != PSA_SUCCESS) { | |
| goto hmac_failed_etm_disabled; | |
| } | |
| #else | |
| ret = mbedtls_md_hmac_update(&transform->md_ctx_enc, add_data, | |
| add_data_len); | |
| if (ret != 0) { | |
| goto hmac_failed_etm_disabled; | |
| } | |
| ret = mbedtls_md_hmac_update(&transform->md_ctx_enc, data, rec->data_len); | |
| if (ret != 0) { | |
| goto hmac_failed_etm_disabled; | |
| } | |
| ret = mbedtls_md_hmac_finish(&transform->md_ctx_enc, mac); | |
| if (ret != 0) { | |
| goto hmac_failed_etm_disabled; | |
| } | |
| ret = mbedtls_md_hmac_reset(&transform->md_ctx_enc); | |
| if (ret != 0) { | |
| goto hmac_failed_etm_disabled; | |
| } | |
| #endif /* MBEDTLS_USE_PSA_CRYPTO */ | |
| memcpy(data + rec->data_len, mac, transform->maclen); | |
| #endif | |
| MBEDTLS_SSL_DEBUG_BUF(4, "computed mac", data + rec->data_len, | |
| transform->maclen); | |
| rec->data_len += transform->maclen; | |
| post_avail -= transform->maclen; | |
| auth_done++; | |
| hmac_failed_etm_disabled: | |
| mbedtls_platform_zeroize(mac, transform->maclen); | |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) | |
| ret = PSA_TO_MBEDTLS_ERR(status); | |
| status = psa_mac_abort(&operation); | |
| if (ret == 0 && status != PSA_SUCCESS) { | |
| ret = PSA_TO_MBEDTLS_ERR(status); | |
| } | |
| #endif /* MBEDTLS_USE_PSA_CRYPTO */ | |
| if (ret != 0) { | |
| MBEDTLS_SSL_DEBUG_RET(1, "mbedtls_md_hmac_xxx", ret); | |
| return ret; | |
| } | |
| } | |
| #endif /* MBEDTLS_SSL_SOME_SUITES_USE_MAC */ | |
| /* | |
| * Encrypt | |
| */ | |
| #if defined(MBEDTLS_SSL_SOME_SUITES_USE_STREAM) | |
| if (ssl_mode == MBEDTLS_SSL_MODE_STREAM) { | |
| MBEDTLS_SSL_DEBUG_MSG(3, ("before encrypt: msglen = %" MBEDTLS_PRINTF_SIZET ", " | |
| "including %d bytes of padding", | |
| rec->data_len, 0)); | |
| /* The only supported stream cipher is "NULL", | |
| * so there's nothing to do here.*/ | |
| } else | |
| #endif /* MBEDTLS_SSL_SOME_SUITES_USE_STREAM */ | |
| #if defined(MBEDTLS_GCM_C) || \ | |
| defined(MBEDTLS_CCM_C) || \ | |
| defined(MBEDTLS_CHACHAPOLY_C) | |
| if (ssl_mode == MBEDTLS_SSL_MODE_AEAD) { | |
| unsigned char iv[12]; | |
| unsigned char *dynamic_iv; | |
| size_t dynamic_iv_len; | |
| int dynamic_iv_is_explicit = | |
| ssl_transform_aead_dynamic_iv_is_explicit(transform); | |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) | |
| psa_status_t status = PSA_ERROR_CORRUPTION_DETECTED; | |
| #endif /* MBEDTLS_USE_PSA_CRYPTO */ | |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; | |
| /* Check that there's space for the authentication tag. */ | |
| if (post_avail < transform->taglen) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("Buffer provided for encrypted record not large enough")); | |
| return MBEDTLS_ERR_SSL_BUFFER_TOO_SMALL; | |
| } | |
| /* | |
| * Build nonce for AEAD encryption. | |
| * | |
| * Note: In the case of CCM and GCM in TLS 1.2, the dynamic | |
| * part of the IV is prepended to the ciphertext and | |
| * can be chosen freely - in particular, it need not | |
| * agree with the record sequence number. | |
| * However, since ChaChaPoly as well as all AEAD modes | |
| * in TLS 1.3 use the record sequence number as the | |
| * dynamic part of the nonce, we uniformly use the | |
| * record sequence number here in all cases. | |
| */ | |
| dynamic_iv = rec->ctr; | |
| dynamic_iv_len = sizeof(rec->ctr); | |
| ssl_build_record_nonce(iv, sizeof(iv), | |
| transform->iv_enc, | |
| transform->fixed_ivlen, | |
| dynamic_iv, | |
| dynamic_iv_len); | |
| /* | |
| * Build additional data for AEAD encryption. | |
| * This depends on the TLS version. | |
| */ | |
| ssl_extract_add_data_from_record(add_data, &add_data_len, rec, | |
| transform->tls_version, | |
| transform->taglen); | |
| MBEDTLS_SSL_DEBUG_BUF(4, "IV used (internal)", | |
| iv, transform->ivlen); | |
| MBEDTLS_SSL_DEBUG_BUF(4, "IV used (transmitted)", | |
| dynamic_iv, | |
| dynamic_iv_is_explicit ? dynamic_iv_len : 0); | |
| MBEDTLS_SSL_DEBUG_BUF(4, "additional data used for AEAD", | |
| add_data, add_data_len); | |
| MBEDTLS_SSL_DEBUG_MSG(3, ("before encrypt: msglen = %" MBEDTLS_PRINTF_SIZET ", " | |
| "including 0 bytes of padding", | |
| rec->data_len)); | |
| /* | |
| * Encrypt and authenticate | |
| */ | |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) | |
| status = psa_aead_encrypt(transform->psa_key_enc, | |
| transform->psa_alg, | |
| iv, transform->ivlen, | |
| add_data, add_data_len, | |
| data, rec->data_len, | |
| data, rec->buf_len - (data - rec->buf), | |
| &rec->data_len); | |
| if (status != PSA_SUCCESS) { | |
| ret = PSA_TO_MBEDTLS_ERR(status); | |
| MBEDTLS_SSL_DEBUG_RET(1, "mbedtls_ssl_encrypt_buf", ret); | |
| return ret; | |
| } | |
| #else | |
| if ((ret = mbedtls_cipher_auth_encrypt_ext(&transform->cipher_ctx_enc, | |
| iv, transform->ivlen, | |
| add_data, add_data_len, | |
| data, rec->data_len, /* src */ | |
| data, rec->buf_len - (data - rec->buf), /* dst */ | |
| &rec->data_len, | |
| transform->taglen)) != 0) { | |
| MBEDTLS_SSL_DEBUG_RET(1, "mbedtls_cipher_auth_encrypt_ext", ret); | |
| return ret; | |
| } | |
| #endif /* MBEDTLS_USE_PSA_CRYPTO */ | |
| MBEDTLS_SSL_DEBUG_BUF(4, "after encrypt: tag", | |
| data + rec->data_len - transform->taglen, | |
| transform->taglen); | |
| /* Account for authentication tag. */ | |
| post_avail -= transform->taglen; | |
| /* | |
| * Prefix record content with dynamic IV in case it is explicit. | |
| */ | |
| if (dynamic_iv_is_explicit != 0) { | |
| if (rec->data_offset < dynamic_iv_len) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("Buffer provided for encrypted record not large enough")); | |
| return MBEDTLS_ERR_SSL_BUFFER_TOO_SMALL; | |
| } | |
| memcpy(data - dynamic_iv_len, dynamic_iv, dynamic_iv_len); | |
| rec->data_offset -= dynamic_iv_len; | |
| rec->data_len += dynamic_iv_len; | |
| } | |
| auth_done++; | |
| } else | |
| #endif /* MBEDTLS_GCM_C || MBEDTLS_CCM_C || MBEDTLS_CHACHAPOLY_C */ | |
| #if defined(MBEDTLS_SSL_SOME_SUITES_USE_CBC) | |
| if (ssl_mode == MBEDTLS_SSL_MODE_CBC || | |
| ssl_mode == MBEDTLS_SSL_MODE_CBC_ETM) { | |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; | |
| size_t padlen, i; | |
| size_t olen; | |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) | |
| psa_status_t status = PSA_ERROR_CORRUPTION_DETECTED; | |
| size_t part_len; | |
| psa_cipher_operation_t cipher_op = PSA_CIPHER_OPERATION_INIT; | |
| #endif /* MBEDTLS_USE_PSA_CRYPTO */ | |
| /* Currently we're always using minimal padding | |
| * (up to 255 bytes would be allowed). */ | |
| padlen = transform->ivlen - (rec->data_len + 1) % transform->ivlen; | |
| if (padlen == transform->ivlen) { | |
| padlen = 0; | |
| } | |
| /* Check there's enough space in the buffer for the padding. */ | |
| if (post_avail < padlen + 1) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("Buffer provided for encrypted record not large enough")); | |
| return MBEDTLS_ERR_SSL_BUFFER_TOO_SMALL; | |
| } | |
| for (i = 0; i <= padlen; i++) { | |
| data[rec->data_len + i] = (unsigned char) padlen; | |
| } | |
| rec->data_len += padlen + 1; | |
| post_avail -= padlen + 1; | |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_2) | |
| /* | |
| * Prepend per-record IV for block cipher in TLS v1.2 as per | |
| * Method 1 (6.2.3.2. in RFC4346 and RFC5246) | |
| */ | |
| if (f_rng == NULL) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("No PRNG provided to encrypt_record routine")); | |
| return MBEDTLS_ERR_SSL_INTERNAL_ERROR; | |
| } | |
| if (rec->data_offset < transform->ivlen) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("Buffer provided for encrypted record not large enough")); | |
| return MBEDTLS_ERR_SSL_BUFFER_TOO_SMALL; | |
| } | |
| /* | |
| * Generate IV | |
| */ | |
| ret = f_rng(p_rng, transform->iv_enc, transform->ivlen); | |
| if (ret != 0) { | |
| return ret; | |
| } | |
| memcpy(data - transform->ivlen, transform->iv_enc, transform->ivlen); | |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_2 */ | |
| MBEDTLS_SSL_DEBUG_MSG(3, ("before encrypt: msglen = %" MBEDTLS_PRINTF_SIZET ", " | |
| "including %" | |
| MBEDTLS_PRINTF_SIZET | |
| " bytes of IV and %" MBEDTLS_PRINTF_SIZET " bytes of padding", | |
| rec->data_len, transform->ivlen, | |
| padlen + 1)); | |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) | |
| status = psa_cipher_encrypt_setup(&cipher_op, | |
| transform->psa_key_enc, transform->psa_alg); | |
| if (status != PSA_SUCCESS) { | |
| ret = PSA_TO_MBEDTLS_ERR(status); | |
| MBEDTLS_SSL_DEBUG_RET(1, "psa_cipher_encrypt_setup", ret); | |
| return ret; | |
| } | |
| status = psa_cipher_set_iv(&cipher_op, transform->iv_enc, transform->ivlen); | |
| if (status != PSA_SUCCESS) { | |
| ret = PSA_TO_MBEDTLS_ERR(status); | |
| MBEDTLS_SSL_DEBUG_RET(1, "psa_cipher_set_iv", ret); | |
| return ret; | |
| } | |
| status = psa_cipher_update(&cipher_op, | |
| data, rec->data_len, | |
| data, rec->data_len, &olen); | |
| if (status != PSA_SUCCESS) { | |
| ret = PSA_TO_MBEDTLS_ERR(status); | |
| MBEDTLS_SSL_DEBUG_RET(1, "psa_cipher_update", ret); | |
| return ret; | |
| } | |
| status = psa_cipher_finish(&cipher_op, | |
| data + olen, rec->data_len - olen, | |
| &part_len); | |
| if (status != PSA_SUCCESS) { | |
| ret = PSA_TO_MBEDTLS_ERR(status); | |
| MBEDTLS_SSL_DEBUG_RET(1, "psa_cipher_finish", ret); | |
| return ret; | |
| } | |
| olen += part_len; | |
| #else | |
| if ((ret = mbedtls_cipher_crypt(&transform->cipher_ctx_enc, | |
| transform->iv_enc, | |
| transform->ivlen, | |
| data, rec->data_len, | |
| data, &olen)) != 0) { | |
| MBEDTLS_SSL_DEBUG_RET(1, "mbedtls_cipher_crypt", ret); | |
| return ret; | |
| } | |
| #endif /* MBEDTLS_USE_PSA_CRYPTO */ | |
| if (rec->data_len != olen) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("should never happen")); | |
| return MBEDTLS_ERR_SSL_INTERNAL_ERROR; | |
| } | |
| data -= transform->ivlen; | |
| rec->data_offset -= transform->ivlen; | |
| rec->data_len += transform->ivlen; | |
| #if defined(MBEDTLS_SSL_ENCRYPT_THEN_MAC) | |
| if (auth_done == 0) { | |
| unsigned char mac[MBEDTLS_SSL_MAC_ADD]; | |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) | |
| psa_mac_operation_t operation = PSA_MAC_OPERATION_INIT; | |
| size_t sign_mac_length = 0; | |
| #endif /* MBEDTLS_USE_PSA_CRYPTO */ | |
| /* MAC(MAC_write_key, add_data, IV, ENC(content + padding + padding_length)) | |
| */ | |
| if (post_avail < transform->maclen) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("Buffer provided for encrypted record not large enough")); | |
| return MBEDTLS_ERR_SSL_BUFFER_TOO_SMALL; | |
| } | |
| ssl_extract_add_data_from_record(add_data, &add_data_len, | |
| rec, transform->tls_version, | |
| transform->taglen); | |
| MBEDTLS_SSL_DEBUG_MSG(3, ("using encrypt then mac")); | |
| MBEDTLS_SSL_DEBUG_BUF(4, "MAC'd meta-data", add_data, | |
| add_data_len); | |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) | |
| status = psa_mac_sign_setup(&operation, transform->psa_mac_enc, | |
| transform->psa_mac_alg); | |
| if (status != PSA_SUCCESS) { | |
| goto hmac_failed_etm_enabled; | |
| } | |
| status = psa_mac_update(&operation, add_data, add_data_len); | |
| if (status != PSA_SUCCESS) { | |
| goto hmac_failed_etm_enabled; | |
| } | |
| status = psa_mac_update(&operation, data, rec->data_len); | |
| if (status != PSA_SUCCESS) { | |
| goto hmac_failed_etm_enabled; | |
| } | |
| status = psa_mac_sign_finish(&operation, mac, MBEDTLS_SSL_MAC_ADD, | |
| &sign_mac_length); | |
| if (status != PSA_SUCCESS) { | |
| goto hmac_failed_etm_enabled; | |
| } | |
| #else | |
| ret = mbedtls_md_hmac_update(&transform->md_ctx_enc, add_data, | |
| add_data_len); | |
| if (ret != 0) { | |
| goto hmac_failed_etm_enabled; | |
| } | |
| ret = mbedtls_md_hmac_update(&transform->md_ctx_enc, | |
| data, rec->data_len); | |
| if (ret != 0) { | |
| goto hmac_failed_etm_enabled; | |
| } | |
| ret = mbedtls_md_hmac_finish(&transform->md_ctx_enc, mac); | |
| if (ret != 0) { | |
| goto hmac_failed_etm_enabled; | |
| } | |
| ret = mbedtls_md_hmac_reset(&transform->md_ctx_enc); | |
| if (ret != 0) { | |
| goto hmac_failed_etm_enabled; | |
| } | |
| #endif /* MBEDTLS_USE_PSA_CRYPTO */ | |
| memcpy(data + rec->data_len, mac, transform->maclen); | |
| rec->data_len += transform->maclen; | |
| post_avail -= transform->maclen; | |
| auth_done++; | |
| hmac_failed_etm_enabled: | |
| mbedtls_platform_zeroize(mac, transform->maclen); | |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) | |
| ret = PSA_TO_MBEDTLS_ERR(status); | |
| status = psa_mac_abort(&operation); | |
| if (ret == 0 && status != PSA_SUCCESS) { | |
| ret = PSA_TO_MBEDTLS_ERR(status); | |
| } | |
| #endif /* MBEDTLS_USE_PSA_CRYPTO */ | |
| if (ret != 0) { | |
| MBEDTLS_SSL_DEBUG_RET(1, "HMAC calculation failed", ret); | |
| return ret; | |
| } | |
| } | |
| #endif /* MBEDTLS_SSL_ENCRYPT_THEN_MAC */ | |
| } else | |
| #endif /* MBEDTLS_SSL_SOME_SUITES_USE_CBC) */ | |
| { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("should never happen")); | |
| return MBEDTLS_ERR_SSL_INTERNAL_ERROR; | |
| } | |
| /* Make extra sure authentication was performed, exactly once */ | |
| if (auth_done != 1) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("should never happen")); | |
| return MBEDTLS_ERR_SSL_INTERNAL_ERROR; | |
| } | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("<= encrypt buf")); | |
| return 0; | |
| } | |
| int mbedtls_ssl_decrypt_buf(mbedtls_ssl_context const *ssl, | |
| mbedtls_ssl_transform *transform, | |
| mbedtls_record *rec) | |
| { | |
| #if defined(MBEDTLS_SSL_SOME_SUITES_USE_CBC) || defined(MBEDTLS_CIPHER_MODE_AEAD) | |
| size_t olen; | |
| #endif /* MBEDTLS_SSL_SOME_SUITES_USE_CBC || MBEDTLS_CIPHER_MODE_AEAD */ | |
| mbedtls_ssl_mode_t ssl_mode; | |
| int ret; | |
| int auth_done = 0; | |
| #if defined(MBEDTLS_SSL_SOME_SUITES_USE_MAC) | |
| size_t padlen = 0; | |
| mbedtls_ct_condition_t correct = MBEDTLS_CT_TRUE; | |
| #endif | |
| unsigned char *data; | |
| /* For an explanation of the additional data length see | |
| * the description of ssl_extract_add_data_from_record(). | |
| */ | |
| #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) | |
| unsigned char add_data[23 + MBEDTLS_SSL_CID_IN_LEN_MAX]; | |
| #else | |
| unsigned char add_data[13]; | |
| #endif | |
| size_t add_data_len; | |
| #if !defined(MBEDTLS_DEBUG_C) | |
| ssl = NULL; /* make sure we don't use it except for debug */ | |
| ((void) ssl); | |
| #endif | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("=> decrypt buf")); | |
| if (rec == NULL || | |
| rec->buf == NULL || | |
| rec->buf_len < rec->data_offset || | |
| rec->buf_len - rec->data_offset < rec->data_len) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("bad record structure provided to decrypt_buf")); | |
| return MBEDTLS_ERR_SSL_INTERNAL_ERROR; | |
| } | |
| data = rec->buf + rec->data_offset; | |
| ssl_mode = mbedtls_ssl_get_mode_from_transform(transform); | |
| #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) | |
| /* | |
| * Match record's CID with incoming CID. | |
| */ | |
| if (rec->cid_len != transform->in_cid_len || | |
| memcmp(rec->cid, transform->in_cid, rec->cid_len) != 0) { | |
| return MBEDTLS_ERR_SSL_UNEXPECTED_CID; | |
| } | |
| #endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ | |
| #if defined(MBEDTLS_SSL_SOME_SUITES_USE_STREAM) | |
| if (ssl_mode == MBEDTLS_SSL_MODE_STREAM) { | |
| /* The only supported stream cipher is "NULL", | |
| * so there's nothing to do here.*/ | |
| } else | |
| #endif /* MBEDTLS_SSL_SOME_SUITES_USE_STREAM */ | |
| #if defined(MBEDTLS_GCM_C) || \ | |
| defined(MBEDTLS_CCM_C) || \ | |
| defined(MBEDTLS_CHACHAPOLY_C) | |
| if (ssl_mode == MBEDTLS_SSL_MODE_AEAD) { | |
| unsigned char iv[12]; | |
| unsigned char *dynamic_iv; | |
| size_t dynamic_iv_len; | |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) | |
| psa_status_t status = PSA_ERROR_CORRUPTION_DETECTED; | |
| #endif /* MBEDTLS_USE_PSA_CRYPTO */ | |
| /* | |
| * Extract dynamic part of nonce for AEAD decryption. | |
| * | |
| * Note: In the case of CCM and GCM in TLS 1.2, the dynamic | |
| * part of the IV is prepended to the ciphertext and | |
| * can be chosen freely - in particular, it need not | |
| * agree with the record sequence number. | |
| */ | |
| dynamic_iv_len = sizeof(rec->ctr); | |
| if (ssl_transform_aead_dynamic_iv_is_explicit(transform) == 1) { | |
| if (rec->data_len < dynamic_iv_len) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("msglen (%" MBEDTLS_PRINTF_SIZET | |
| " ) < explicit_iv_len (%" MBEDTLS_PRINTF_SIZET ") ", | |
| rec->data_len, | |
| dynamic_iv_len)); | |
| return MBEDTLS_ERR_SSL_INVALID_MAC; | |
| } | |
| dynamic_iv = data; | |
| data += dynamic_iv_len; | |
| rec->data_offset += dynamic_iv_len; | |
| rec->data_len -= dynamic_iv_len; | |
| } else { | |
| dynamic_iv = rec->ctr; | |
| } | |
| /* Check that there's space for the authentication tag. */ | |
| if (rec->data_len < transform->taglen) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("msglen (%" MBEDTLS_PRINTF_SIZET | |
| ") < taglen (%" MBEDTLS_PRINTF_SIZET ") ", | |
| rec->data_len, | |
| transform->taglen)); | |
| return MBEDTLS_ERR_SSL_INVALID_MAC; | |
| } | |
| rec->data_len -= transform->taglen; | |
| /* | |
| * Prepare nonce from dynamic and static parts. | |
| */ | |
| ssl_build_record_nonce(iv, sizeof(iv), | |
| transform->iv_dec, | |
| transform->fixed_ivlen, | |
| dynamic_iv, | |
| dynamic_iv_len); | |
| /* | |
| * Build additional data for AEAD encryption. | |
| * This depends on the TLS version. | |
| */ | |
| ssl_extract_add_data_from_record(add_data, &add_data_len, rec, | |
| transform->tls_version, | |
| transform->taglen); | |
| MBEDTLS_SSL_DEBUG_BUF(4, "additional data used for AEAD", | |
| add_data, add_data_len); | |
| /* Because of the check above, we know that there are | |
| * explicit_iv_len Bytes preceding data, and taglen | |
| * bytes following data + data_len. This justifies | |
| * the debug message and the invocation of | |
| * mbedtls_cipher_auth_decrypt_ext() below. */ | |
| MBEDTLS_SSL_DEBUG_BUF(4, "IV used", iv, transform->ivlen); | |
| MBEDTLS_SSL_DEBUG_BUF(4, "TAG used", data + rec->data_len, | |
| transform->taglen); | |
| /* | |
| * Decrypt and authenticate | |
| */ | |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) | |
| status = psa_aead_decrypt(transform->psa_key_dec, | |
| transform->psa_alg, | |
| iv, transform->ivlen, | |
| add_data, add_data_len, | |
| data, rec->data_len + transform->taglen, | |
| data, rec->buf_len - (data - rec->buf), | |
| &olen); | |
| if (status != PSA_SUCCESS) { | |
| ret = PSA_TO_MBEDTLS_ERR(status); | |
| MBEDTLS_SSL_DEBUG_RET(1, "psa_aead_decrypt", ret); | |
| return ret; | |
| } | |
| #else | |
| if ((ret = mbedtls_cipher_auth_decrypt_ext(&transform->cipher_ctx_dec, | |
| iv, transform->ivlen, | |
| add_data, add_data_len, | |
| data, rec->data_len + transform->taglen, /* src */ | |
| data, rec->buf_len - (data - rec->buf), &olen, /* dst */ | |
| transform->taglen)) != 0) { | |
| MBEDTLS_SSL_DEBUG_RET(1, "mbedtls_cipher_auth_decrypt_ext", ret); | |
| if (ret == MBEDTLS_ERR_CIPHER_AUTH_FAILED) { | |
| return MBEDTLS_ERR_SSL_INVALID_MAC; | |
| } | |
| return ret; | |
| } | |
| #endif /* MBEDTLS_USE_PSA_CRYPTO */ | |
| auth_done++; | |
| /* Double-check that AEAD decryption doesn't change content length. */ | |
| if (olen != rec->data_len) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("should never happen")); | |
| return MBEDTLS_ERR_SSL_INTERNAL_ERROR; | |
| } | |
| } else | |
| #endif /* MBEDTLS_GCM_C || MBEDTLS_CCM_C */ | |
| #if defined(MBEDTLS_SSL_SOME_SUITES_USE_CBC) | |
| if (ssl_mode == MBEDTLS_SSL_MODE_CBC || | |
| ssl_mode == MBEDTLS_SSL_MODE_CBC_ETM) { | |
| size_t minlen = 0; | |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) | |
| psa_status_t status = PSA_ERROR_CORRUPTION_DETECTED; | |
| size_t part_len; | |
| psa_cipher_operation_t cipher_op = PSA_CIPHER_OPERATION_INIT; | |
| #endif /* MBEDTLS_USE_PSA_CRYPTO */ | |
| /* | |
| * Check immediate ciphertext sanity | |
| */ | |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_2) | |
| /* The ciphertext is prefixed with the CBC IV. */ | |
| minlen += transform->ivlen; | |
| #endif | |
| /* Size considerations: | |
| * | |
| * - The CBC cipher text must not be empty and hence | |
| * at least of size transform->ivlen. | |
| * | |
| * Together with the potential IV-prefix, this explains | |
| * the first of the two checks below. | |
| * | |
| * - The record must contain a MAC, either in plain or | |
| * encrypted, depending on whether Encrypt-then-MAC | |
| * is used or not. | |
| * - If it is, the message contains the IV-prefix, | |
| * the CBC ciphertext, and the MAC. | |
| * - If it is not, the padded plaintext, and hence | |
| * the CBC ciphertext, has at least length maclen + 1 | |
| * because there is at least the padding length byte. | |
| * | |
| * As the CBC ciphertext is not empty, both cases give the | |
| * lower bound minlen + maclen + 1 on the record size, which | |
| * we test for in the second check below. | |
| */ | |
| if (rec->data_len < minlen + transform->ivlen || | |
| rec->data_len < minlen + transform->maclen + 1) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("msglen (%" MBEDTLS_PRINTF_SIZET | |
| ") < max( ivlen(%" MBEDTLS_PRINTF_SIZET | |
| "), maclen (%" MBEDTLS_PRINTF_SIZET ") " | |
| "+ 1 ) ( + expl IV )", | |
| rec->data_len, | |
| transform->ivlen, | |
| transform->maclen)); | |
| return MBEDTLS_ERR_SSL_INVALID_MAC; | |
| } | |
| /* | |
| * Authenticate before decrypt if enabled | |
| */ | |
| #if defined(MBEDTLS_SSL_ENCRYPT_THEN_MAC) | |
| if (ssl_mode == MBEDTLS_SSL_MODE_CBC_ETM) { | |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) | |
| psa_mac_operation_t operation = PSA_MAC_OPERATION_INIT; | |
| #else | |
| unsigned char mac_expect[MBEDTLS_SSL_MAC_ADD]; | |
| #endif /* MBEDTLS_USE_PSA_CRYPTO */ | |
| MBEDTLS_SSL_DEBUG_MSG(3, ("using encrypt then mac")); | |
| /* Update data_len in tandem with add_data. | |
| * | |
| * The subtraction is safe because of the previous check | |
| * data_len >= minlen + maclen + 1. | |
| * | |
| * Afterwards, we know that data + data_len is followed by at | |
| * least maclen Bytes, which justifies the call to | |
| * mbedtls_ct_memcmp() below. | |
| * | |
| * Further, we still know that data_len > minlen */ | |
| rec->data_len -= transform->maclen; | |
| ssl_extract_add_data_from_record(add_data, &add_data_len, rec, | |
| transform->tls_version, | |
| transform->taglen); | |
| /* Calculate expected MAC. */ | |
| MBEDTLS_SSL_DEBUG_BUF(4, "MAC'd meta-data", add_data, | |
| add_data_len); | |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) | |
| status = psa_mac_verify_setup(&operation, transform->psa_mac_dec, | |
| transform->psa_mac_alg); | |
| if (status != PSA_SUCCESS) { | |
| goto hmac_failed_etm_enabled; | |
| } | |
| status = psa_mac_update(&operation, add_data, add_data_len); | |
| if (status != PSA_SUCCESS) { | |
| goto hmac_failed_etm_enabled; | |
| } | |
| status = psa_mac_update(&operation, data, rec->data_len); | |
| if (status != PSA_SUCCESS) { | |
| goto hmac_failed_etm_enabled; | |
| } | |
| /* Compare expected MAC with MAC at the end of the record. */ | |
| status = psa_mac_verify_finish(&operation, data + rec->data_len, | |
| transform->maclen); | |
| if (status != PSA_SUCCESS) { | |
| goto hmac_failed_etm_enabled; | |
| } | |
| #else | |
| ret = mbedtls_md_hmac_update(&transform->md_ctx_dec, add_data, | |
| add_data_len); | |
| if (ret != 0) { | |
| goto hmac_failed_etm_enabled; | |
| } | |
| ret = mbedtls_md_hmac_update(&transform->md_ctx_dec, | |
| data, rec->data_len); | |
| if (ret != 0) { | |
| goto hmac_failed_etm_enabled; | |
| } | |
| ret = mbedtls_md_hmac_finish(&transform->md_ctx_dec, mac_expect); | |
| if (ret != 0) { | |
| goto hmac_failed_etm_enabled; | |
| } | |
| ret = mbedtls_md_hmac_reset(&transform->md_ctx_dec); | |
| if (ret != 0) { | |
| goto hmac_failed_etm_enabled; | |
| } | |
| MBEDTLS_SSL_DEBUG_BUF(4, "message mac", data + rec->data_len, | |
| transform->maclen); | |
| MBEDTLS_SSL_DEBUG_BUF(4, "expected mac", mac_expect, | |
| transform->maclen); | |
| /* Compare expected MAC with MAC at the end of the record. */ | |
| if (mbedtls_ct_memcmp(data + rec->data_len, mac_expect, | |
| transform->maclen) != 0) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("message mac does not match")); | |
| ret = MBEDTLS_ERR_SSL_INVALID_MAC; | |
| goto hmac_failed_etm_enabled; | |
| } | |
| #endif /* MBEDTLS_USE_PSA_CRYPTO */ | |
| auth_done++; | |
| hmac_failed_etm_enabled: | |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) | |
| ret = PSA_TO_MBEDTLS_ERR(status); | |
| status = psa_mac_abort(&operation); | |
| if (ret == 0 && status != PSA_SUCCESS) { | |
| ret = PSA_TO_MBEDTLS_ERR(status); | |
| } | |
| #else | |
| mbedtls_platform_zeroize(mac_expect, transform->maclen); | |
| #endif /* MBEDTLS_USE_PSA_CRYPTO */ | |
| if (ret != 0) { | |
| if (ret != MBEDTLS_ERR_SSL_INVALID_MAC) { | |
| MBEDTLS_SSL_DEBUG_RET(1, "mbedtls_hmac_xxx", ret); | |
| } | |
| return ret; | |
| } | |
| } | |
| #endif /* MBEDTLS_SSL_ENCRYPT_THEN_MAC */ | |
| /* | |
| * Check length sanity | |
| */ | |
| /* We know from above that data_len > minlen >= 0, | |
| * so the following check in particular implies that | |
| * data_len >= minlen + ivlen ( = minlen or 2 * minlen ). */ | |
| if (rec->data_len % transform->ivlen != 0) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("msglen (%" MBEDTLS_PRINTF_SIZET | |
| ") %% ivlen (%" MBEDTLS_PRINTF_SIZET ") != 0", | |
| rec->data_len, transform->ivlen)); | |
| return MBEDTLS_ERR_SSL_INVALID_MAC; | |
| } | |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_2) | |
| /* | |
| * Initialize for prepended IV for block cipher in TLS v1.2 | |
| */ | |
| /* Safe because data_len >= minlen + ivlen = 2 * ivlen. */ | |
| memcpy(transform->iv_dec, data, transform->ivlen); | |
| data += transform->ivlen; | |
| rec->data_offset += transform->ivlen; | |
| rec->data_len -= transform->ivlen; | |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_2 */ | |
| /* We still have data_len % ivlen == 0 and data_len >= ivlen here. */ | |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) | |
| status = psa_cipher_decrypt_setup(&cipher_op, | |
| transform->psa_key_dec, transform->psa_alg); | |
| if (status != PSA_SUCCESS) { | |
| ret = PSA_TO_MBEDTLS_ERR(status); | |
| MBEDTLS_SSL_DEBUG_RET(1, "psa_cipher_decrypt_setup", ret); | |
| return ret; | |
| } | |
| status = psa_cipher_set_iv(&cipher_op, transform->iv_dec, transform->ivlen); | |
| if (status != PSA_SUCCESS) { | |
| ret = PSA_TO_MBEDTLS_ERR(status); | |
| MBEDTLS_SSL_DEBUG_RET(1, "psa_cipher_set_iv", ret); | |
| return ret; | |
| } | |
| status = psa_cipher_update(&cipher_op, | |
| data, rec->data_len, | |
| data, rec->data_len, &olen); | |
| if (status != PSA_SUCCESS) { | |
| ret = PSA_TO_MBEDTLS_ERR(status); | |
| MBEDTLS_SSL_DEBUG_RET(1, "psa_cipher_update", ret); | |
| return ret; | |
| } | |
| status = psa_cipher_finish(&cipher_op, | |
| data + olen, rec->data_len - olen, | |
| &part_len); | |
| if (status != PSA_SUCCESS) { | |
| ret = PSA_TO_MBEDTLS_ERR(status); | |
| MBEDTLS_SSL_DEBUG_RET(1, "psa_cipher_finish", ret); | |
| return ret; | |
| } | |
| olen += part_len; | |
| #else | |
| if ((ret = mbedtls_cipher_crypt(&transform->cipher_ctx_dec, | |
| transform->iv_dec, transform->ivlen, | |
| data, rec->data_len, data, &olen)) != 0) { | |
| MBEDTLS_SSL_DEBUG_RET(1, "mbedtls_cipher_crypt", ret); | |
| return ret; | |
| } | |
| #endif /* MBEDTLS_USE_PSA_CRYPTO */ | |
| /* Double-check that length hasn't changed during decryption. */ | |
| if (rec->data_len != olen) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("should never happen")); | |
| return MBEDTLS_ERR_SSL_INTERNAL_ERROR; | |
| } | |
| /* Safe since data_len >= minlen + maclen + 1, so after having | |
| * subtracted at most minlen and maclen up to this point, | |
| * data_len > 0 (because of data_len % ivlen == 0, it's actually | |
| * >= ivlen ). */ | |
| padlen = data[rec->data_len - 1]; | |
| if (auth_done == 1) { | |
| const mbedtls_ct_condition_t ge = mbedtls_ct_uint_ge( | |
| rec->data_len, | |
| padlen + 1); | |
| correct = mbedtls_ct_bool_and(ge, correct); | |
| padlen = mbedtls_ct_size_if_else_0(ge, padlen); | |
| } else { | |
| #if defined(MBEDTLS_SSL_DEBUG_ALL) | |
| if (rec->data_len < transform->maclen + padlen + 1) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("msglen (%" MBEDTLS_PRINTF_SIZET | |
| ") < maclen (%" MBEDTLS_PRINTF_SIZET | |
| ") + padlen (%" MBEDTLS_PRINTF_SIZET ")", | |
| rec->data_len, | |
| transform->maclen, | |
| padlen + 1)); | |
| } | |
| #endif | |
| const mbedtls_ct_condition_t ge = mbedtls_ct_uint_ge( | |
| rec->data_len, | |
| transform->maclen + padlen + 1); | |
| correct = mbedtls_ct_bool_and(ge, correct); | |
| padlen = mbedtls_ct_size_if_else_0(ge, padlen); | |
| } | |
| padlen++; | |
| /* Regardless of the validity of the padding, | |
| * we have data_len >= padlen here. */ | |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_2) | |
| /* The padding check involves a series of up to 256 | |
| * consecutive memory reads at the end of the record | |
| * plaintext buffer. In order to hide the length and | |
| * validity of the padding, always perform exactly | |
| * `min(256,plaintext_len)` reads (but take into account | |
| * only the last `padlen` bytes for the padding check). */ | |
| size_t pad_count = 0; | |
| volatile unsigned char * const check = data; | |
| /* Index of first padding byte; it has been ensured above | |
| * that the subtraction is safe. */ | |
| size_t const padding_idx = rec->data_len - padlen; | |
| size_t const num_checks = rec->data_len <= 256 ? rec->data_len : 256; | |
| size_t const start_idx = rec->data_len - num_checks; | |
| size_t idx; | |
| for (idx = start_idx; idx < rec->data_len; idx++) { | |
| /* pad_count += (idx >= padding_idx) && | |
| * (check[idx] == padlen - 1); | |
| */ | |
| const mbedtls_ct_condition_t a = mbedtls_ct_uint_ge(idx, padding_idx); | |
| size_t increment = mbedtls_ct_size_if_else_0(a, 1); | |
| const mbedtls_ct_condition_t b = mbedtls_ct_uint_eq(check[idx], padlen - 1); | |
| increment = mbedtls_ct_size_if_else_0(b, increment); | |
| pad_count += increment; | |
| } | |
| correct = mbedtls_ct_bool_and(mbedtls_ct_uint_eq(pad_count, padlen), correct); | |
| #if defined(MBEDTLS_SSL_DEBUG_ALL) | |
| if (padlen > 0 && correct == MBEDTLS_CT_FALSE) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("bad padding byte detected")); | |
| } | |
| #endif | |
| padlen = mbedtls_ct_size_if_else_0(correct, padlen); | |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_2 */ | |
| /* If the padding was found to be invalid, padlen == 0 | |
| * and the subtraction is safe. If the padding was found valid, | |
| * padlen hasn't been changed and the previous assertion | |
| * data_len >= padlen still holds. */ | |
| rec->data_len -= padlen; | |
| } else | |
| #endif /* MBEDTLS_SSL_SOME_SUITES_USE_CBC */ | |
| { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("should never happen")); | |
| return MBEDTLS_ERR_SSL_INTERNAL_ERROR; | |
| } | |
| #if defined(MBEDTLS_SSL_DEBUG_ALL) | |
| MBEDTLS_SSL_DEBUG_BUF(4, "raw buffer after decryption", | |
| data, rec->data_len); | |
| #endif | |
| /* | |
| * Authenticate if not done yet. | |
| * Compute the MAC regardless of the padding result (RFC4346, CBCTIME). | |
| */ | |
| #if defined(MBEDTLS_SSL_SOME_SUITES_USE_MAC) | |
| if (auth_done == 0) { | |
| unsigned char mac_expect[MBEDTLS_SSL_MAC_ADD] = { 0 }; | |
| unsigned char mac_peer[MBEDTLS_SSL_MAC_ADD] = { 0 }; | |
| /* If the initial value of padlen was such that | |
| * data_len < maclen + padlen + 1, then padlen | |
| * got reset to 1, and the initial check | |
| * data_len >= minlen + maclen + 1 | |
| * guarantees that at this point we still | |
| * have at least data_len >= maclen. | |
| * | |
| * If the initial value of padlen was such that | |
| * data_len >= maclen + padlen + 1, then we have | |
| * subtracted either padlen + 1 (if the padding was correct) | |
| * or 0 (if the padding was incorrect) since then, | |
| * hence data_len >= maclen in any case. | |
| */ | |
| rec->data_len -= transform->maclen; | |
| ssl_extract_add_data_from_record(add_data, &add_data_len, rec, | |
| transform->tls_version, | |
| transform->taglen); | |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_2) | |
| /* | |
| * The next two sizes are the minimum and maximum values of | |
| * data_len over all padlen values. | |
| * | |
| * They're independent of padlen, since we previously did | |
| * data_len -= padlen. | |
| * | |
| * Note that max_len + maclen is never more than the buffer | |
| * length, as we previously did in_msglen -= maclen too. | |
| */ | |
| const size_t max_len = rec->data_len + padlen; | |
| const size_t min_len = (max_len > 256) ? max_len - 256 : 0; | |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) | |
| ret = mbedtls_ct_hmac(transform->psa_mac_dec, | |
| transform->psa_mac_alg, | |
| add_data, add_data_len, | |
| data, rec->data_len, min_len, max_len, | |
| mac_expect); | |
| #else | |
| ret = mbedtls_ct_hmac(&transform->md_ctx_dec, | |
| add_data, add_data_len, | |
| data, rec->data_len, min_len, max_len, | |
| mac_expect); | |
| #endif /* MBEDTLS_USE_PSA_CRYPTO */ | |
| if (ret != 0) { | |
| MBEDTLS_SSL_DEBUG_RET(1, "mbedtls_ct_hmac", ret); | |
| goto hmac_failed_etm_disabled; | |
| } | |
| mbedtls_ct_memcpy_offset(mac_peer, data, | |
| rec->data_len, | |
| min_len, max_len, | |
| transform->maclen); | |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_2 */ | |
| #if defined(MBEDTLS_SSL_DEBUG_ALL) | |
| MBEDTLS_SSL_DEBUG_BUF(4, "expected mac", mac_expect, transform->maclen); | |
| MBEDTLS_SSL_DEBUG_BUF(4, "message mac", mac_peer, transform->maclen); | |
| #endif | |
| if (mbedtls_ct_memcmp(mac_peer, mac_expect, | |
| transform->maclen) != 0) { | |
| #if defined(MBEDTLS_SSL_DEBUG_ALL) | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("message mac does not match")); | |
| #endif | |
| correct = MBEDTLS_CT_FALSE; | |
| } | |
| auth_done++; | |
| hmac_failed_etm_disabled: | |
| mbedtls_platform_zeroize(mac_peer, transform->maclen); | |
| mbedtls_platform_zeroize(mac_expect, transform->maclen); | |
| if (ret != 0) { | |
| return ret; | |
| } | |
| } | |
| /* | |
| * Finally check the correct flag | |
| */ | |
| if (correct == MBEDTLS_CT_FALSE) { | |
| return MBEDTLS_ERR_SSL_INVALID_MAC; | |
| } | |
| #endif /* MBEDTLS_SSL_SOME_SUITES_USE_MAC */ | |
| /* Make extra sure authentication was performed, exactly once */ | |
| if (auth_done != 1) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("should never happen")); | |
| return MBEDTLS_ERR_SSL_INTERNAL_ERROR; | |
| } | |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_3) | |
| if (transform->tls_version == MBEDTLS_SSL_VERSION_TLS1_3) { | |
| /* Remove inner padding and infer true content type. */ | |
| ret = ssl_parse_inner_plaintext(data, &rec->data_len, | |
| &rec->type); | |
| if (ret != 0) { | |
| return MBEDTLS_ERR_SSL_INVALID_RECORD; | |
| } | |
| } | |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_3 */ | |
| #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) | |
| if (rec->cid_len != 0) { | |
| ret = ssl_parse_inner_plaintext(data, &rec->data_len, | |
| &rec->type); | |
| if (ret != 0) { | |
| return MBEDTLS_ERR_SSL_INVALID_RECORD; | |
| } | |
| } | |
| #endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("<= decrypt buf")); | |
| return 0; | |
| } | |
| #undef MAC_NONE | |
| #undef MAC_PLAINTEXT | |
| #undef MAC_CIPHERTEXT | |
| /* | |
| * Fill the input message buffer by appending data to it. | |
| * The amount of data already fetched is in ssl->in_left. | |
| * | |
| * If we return 0, is it guaranteed that (at least) nb_want bytes are | |
| * available (from this read and/or a previous one). Otherwise, an error code | |
| * is returned (possibly EOF or WANT_READ). | |
| * | |
| * With stream transport (TLS) on success ssl->in_left == nb_want, but | |
| * with datagram transport (DTLS) on success ssl->in_left >= nb_want, | |
| * since we always read a whole datagram at once. | |
| * | |
| * For DTLS, it is up to the caller to set ssl->next_record_offset when | |
| * they're done reading a record. | |
| */ | |
| int mbedtls_ssl_fetch_input(mbedtls_ssl_context *ssl, size_t nb_want) | |
| { | |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; | |
| size_t len; | |
| #if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH) | |
| size_t in_buf_len = ssl->in_buf_len; | |
| #else | |
| size_t in_buf_len = MBEDTLS_SSL_IN_BUFFER_LEN; | |
| #endif | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("=> fetch input")); | |
| if (ssl->f_recv == NULL && ssl->f_recv_timeout == NULL) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("Bad usage of mbedtls_ssl_set_bio() ")); | |
| return MBEDTLS_ERR_SSL_BAD_INPUT_DATA; | |
| } | |
| if (nb_want > in_buf_len - (size_t) (ssl->in_hdr - ssl->in_buf)) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("requesting more data than fits")); | |
| return MBEDTLS_ERR_SSL_BAD_INPUT_DATA; | |
| } | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| if (ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM) { | |
| uint32_t timeout; | |
| /* | |
| * The point is, we need to always read a full datagram at once, so we | |
| * sometimes read more then requested, and handle the additional data. | |
| * It could be the rest of the current record (while fetching the | |
| * header) and/or some other records in the same datagram. | |
| */ | |
| /* | |
| * Move to the next record in the already read datagram if applicable | |
| */ | |
| if (ssl->next_record_offset != 0) { | |
| if (ssl->in_left < ssl->next_record_offset) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("should never happen")); | |
| return MBEDTLS_ERR_SSL_INTERNAL_ERROR; | |
| } | |
| ssl->in_left -= ssl->next_record_offset; | |
| if (ssl->in_left != 0) { | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("next record in same datagram, offset: %" | |
| MBEDTLS_PRINTF_SIZET, | |
| ssl->next_record_offset)); | |
| memmove(ssl->in_hdr, | |
| ssl->in_hdr + ssl->next_record_offset, | |
| ssl->in_left); | |
| } | |
| ssl->next_record_offset = 0; | |
| } | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("in_left: %" MBEDTLS_PRINTF_SIZET | |
| ", nb_want: %" MBEDTLS_PRINTF_SIZET, | |
| ssl->in_left, nb_want)); | |
| /* | |
| * Done if we already have enough data. | |
| */ | |
| if (nb_want <= ssl->in_left) { | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("<= fetch input")); | |
| return 0; | |
| } | |
| /* | |
| * A record can't be split across datagrams. If we need to read but | |
| * are not at the beginning of a new record, the caller did something | |
| * wrong. | |
| */ | |
| if (ssl->in_left != 0) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("should never happen")); | |
| return MBEDTLS_ERR_SSL_INTERNAL_ERROR; | |
| } | |
| /* | |
| * Don't even try to read if time's out already. | |
| * This avoids by-passing the timer when repeatedly receiving messages | |
| * that will end up being dropped. | |
| */ | |
| if (mbedtls_ssl_check_timer(ssl) != 0) { | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("timer has expired")); | |
| ret = MBEDTLS_ERR_SSL_TIMEOUT; | |
| } else { | |
| len = in_buf_len - (ssl->in_hdr - ssl->in_buf); | |
| if (mbedtls_ssl_is_handshake_over(ssl) == 0) { | |
| timeout = ssl->handshake->retransmit_timeout; | |
| } else { | |
| timeout = ssl->conf->read_timeout; | |
| } | |
| MBEDTLS_SSL_DEBUG_MSG(3, ("f_recv_timeout: %lu ms", (unsigned long) timeout)); | |
| if (ssl->f_recv_timeout != NULL) { | |
| ret = ssl->f_recv_timeout(ssl->p_bio, ssl->in_hdr, len, | |
| timeout); | |
| } else { | |
| ret = ssl->f_recv(ssl->p_bio, ssl->in_hdr, len); | |
| } | |
| MBEDTLS_SSL_DEBUG_RET(2, "ssl->f_recv(_timeout)", ret); | |
| if (ret == 0) { | |
| return MBEDTLS_ERR_SSL_CONN_EOF; | |
| } | |
| } | |
| if (ret == MBEDTLS_ERR_SSL_TIMEOUT) { | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("timeout")); | |
| mbedtls_ssl_set_timer(ssl, 0); | |
| if (ssl->state != MBEDTLS_SSL_HANDSHAKE_OVER) { | |
| if (ssl_double_retransmit_timeout(ssl) != 0) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("handshake timeout")); | |
| return MBEDTLS_ERR_SSL_TIMEOUT; | |
| } | |
| if ((ret = mbedtls_ssl_resend(ssl)) != 0) { | |
| MBEDTLS_SSL_DEBUG_RET(1, "mbedtls_ssl_resend", ret); | |
| return ret; | |
| } | |
| return MBEDTLS_ERR_SSL_WANT_READ; | |
| } | |
| #if defined(MBEDTLS_SSL_SRV_C) && defined(MBEDTLS_SSL_RENEGOTIATION) | |
| else if (ssl->conf->endpoint == MBEDTLS_SSL_IS_SERVER && | |
| ssl->renego_status == MBEDTLS_SSL_RENEGOTIATION_PENDING) { | |
| if ((ret = mbedtls_ssl_resend_hello_request(ssl)) != 0) { | |
| MBEDTLS_SSL_DEBUG_RET(1, "mbedtls_ssl_resend_hello_request", | |
| ret); | |
| return ret; | |
| } | |
| return MBEDTLS_ERR_SSL_WANT_READ; | |
| } | |
| #endif /* MBEDTLS_SSL_SRV_C && MBEDTLS_SSL_RENEGOTIATION */ | |
| } | |
| if (ret < 0) { | |
| return ret; | |
| } | |
| ssl->in_left = ret; | |
| } else | |
| #endif | |
| { | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("in_left: %" MBEDTLS_PRINTF_SIZET | |
| ", nb_want: %" MBEDTLS_PRINTF_SIZET, | |
| ssl->in_left, nb_want)); | |
| while (ssl->in_left < nb_want) { | |
| len = nb_want - ssl->in_left; | |
| if (mbedtls_ssl_check_timer(ssl) != 0) { | |
| ret = MBEDTLS_ERR_SSL_TIMEOUT; | |
| } else { | |
| if (ssl->f_recv_timeout != NULL) { | |
| ret = ssl->f_recv_timeout(ssl->p_bio, | |
| ssl->in_hdr + ssl->in_left, len, | |
| ssl->conf->read_timeout); | |
| } else { | |
| ret = ssl->f_recv(ssl->p_bio, | |
| ssl->in_hdr + ssl->in_left, len); | |
| } | |
| } | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("in_left: %" MBEDTLS_PRINTF_SIZET | |
| ", nb_want: %" MBEDTLS_PRINTF_SIZET, | |
| ssl->in_left, nb_want)); | |
| MBEDTLS_SSL_DEBUG_RET(2, "ssl->f_recv(_timeout)", ret); | |
| if (ret == 0) { | |
| return MBEDTLS_ERR_SSL_CONN_EOF; | |
| } | |
| if (ret < 0) { | |
| return ret; | |
| } | |
| if ((size_t) ret > len) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, | |
| ("f_recv returned %d bytes but only %" MBEDTLS_PRINTF_SIZET | |
| " were requested", | |
| ret, len)); | |
| return MBEDTLS_ERR_SSL_INTERNAL_ERROR; | |
| } | |
| ssl->in_left += ret; | |
| } | |
| } | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("<= fetch input")); | |
| return 0; | |
| } | |
| /* | |
| * Flush any data not yet written | |
| */ | |
| int mbedtls_ssl_flush_output(mbedtls_ssl_context *ssl) | |
| { | |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; | |
| unsigned char *buf; | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("=> flush output")); | |
| if (ssl->f_send == NULL) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("Bad usage of mbedtls_ssl_set_bio() ")); | |
| return MBEDTLS_ERR_SSL_BAD_INPUT_DATA; | |
| } | |
| /* Avoid incrementing counter if data is flushed */ | |
| if (ssl->out_left == 0) { | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("<= flush output")); | |
| return 0; | |
| } | |
| while (ssl->out_left > 0) { | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("message length: %" MBEDTLS_PRINTF_SIZET | |
| ", out_left: %" MBEDTLS_PRINTF_SIZET, | |
| mbedtls_ssl_out_hdr_len(ssl) + ssl->out_msglen, ssl->out_left)); | |
| buf = ssl->out_hdr - ssl->out_left; | |
| ret = ssl->f_send(ssl->p_bio, buf, ssl->out_left); | |
| MBEDTLS_SSL_DEBUG_RET(2, "ssl->f_send", ret); | |
| if (ret <= 0) { | |
| return ret; | |
| } | |
| if ((size_t) ret > ssl->out_left) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, | |
| ("f_send returned %d bytes but only %" MBEDTLS_PRINTF_SIZET | |
| " bytes were sent", | |
| ret, ssl->out_left)); | |
| return MBEDTLS_ERR_SSL_INTERNAL_ERROR; | |
| } | |
| ssl->out_left -= ret; | |
| } | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| if (ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM) { | |
| ssl->out_hdr = ssl->out_buf; | |
| } else | |
| #endif | |
| { | |
| ssl->out_hdr = ssl->out_buf + 8; | |
| } | |
| mbedtls_ssl_update_out_pointers(ssl, ssl->transform_out); | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("<= flush output")); | |
| return 0; | |
| } | |
| /* | |
| * Functions to handle the DTLS retransmission state machine | |
| */ | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| /* | |
| * Append current handshake message to current outgoing flight | |
| */ | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_flight_append(mbedtls_ssl_context *ssl) | |
| { | |
| mbedtls_ssl_flight_item *msg; | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("=> ssl_flight_append")); | |
| MBEDTLS_SSL_DEBUG_BUF(4, "message appended to flight", | |
| ssl->out_msg, ssl->out_msglen); | |
| /* Allocate space for current message */ | |
| if ((msg = mbedtls_calloc(1, sizeof(mbedtls_ssl_flight_item))) == NULL) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("alloc %" MBEDTLS_PRINTF_SIZET " bytes failed", | |
| sizeof(mbedtls_ssl_flight_item))); | |
| return MBEDTLS_ERR_SSL_ALLOC_FAILED; | |
| } | |
| if ((msg->p = mbedtls_calloc(1, ssl->out_msglen)) == NULL) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("alloc %" MBEDTLS_PRINTF_SIZET " bytes failed", | |
| ssl->out_msglen)); | |
| mbedtls_free(msg); | |
| return MBEDTLS_ERR_SSL_ALLOC_FAILED; | |
| } | |
| /* Copy current handshake message with headers */ | |
| memcpy(msg->p, ssl->out_msg, ssl->out_msglen); | |
| msg->len = ssl->out_msglen; | |
| msg->type = ssl->out_msgtype; | |
| msg->next = NULL; | |
| /* Append to the current flight */ | |
| if (ssl->handshake->flight == NULL) { | |
| ssl->handshake->flight = msg; | |
| } else { | |
| mbedtls_ssl_flight_item *cur = ssl->handshake->flight; | |
| while (cur->next != NULL) { | |
| cur = cur->next; | |
| } | |
| cur->next = msg; | |
| } | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("<= ssl_flight_append")); | |
| return 0; | |
| } | |
| /* | |
| * Free the current flight of handshake messages | |
| */ | |
| void mbedtls_ssl_flight_free(mbedtls_ssl_flight_item *flight) | |
| { | |
| mbedtls_ssl_flight_item *cur = flight; | |
| mbedtls_ssl_flight_item *next; | |
| while (cur != NULL) { | |
| next = cur->next; | |
| mbedtls_free(cur->p); | |
| mbedtls_free(cur); | |
| cur = next; | |
| } | |
| } | |
| /* | |
| * Swap transform_out and out_ctr with the alternative ones | |
| */ | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_swap_epochs(mbedtls_ssl_context *ssl) | |
| { | |
| mbedtls_ssl_transform *tmp_transform; | |
| unsigned char tmp_out_ctr[MBEDTLS_SSL_SEQUENCE_NUMBER_LEN]; | |
| if (ssl->transform_out == ssl->handshake->alt_transform_out) { | |
| MBEDTLS_SSL_DEBUG_MSG(3, ("skip swap epochs")); | |
| return 0; | |
| } | |
| MBEDTLS_SSL_DEBUG_MSG(3, ("swap epochs")); | |
| /* Swap transforms */ | |
| tmp_transform = ssl->transform_out; | |
| ssl->transform_out = ssl->handshake->alt_transform_out; | |
| ssl->handshake->alt_transform_out = tmp_transform; | |
| /* Swap epoch + sequence_number */ | |
| memcpy(tmp_out_ctr, ssl->cur_out_ctr, sizeof(tmp_out_ctr)); | |
| memcpy(ssl->cur_out_ctr, ssl->handshake->alt_out_ctr, | |
| sizeof(ssl->cur_out_ctr)); | |
| memcpy(ssl->handshake->alt_out_ctr, tmp_out_ctr, | |
| sizeof(ssl->handshake->alt_out_ctr)); | |
| /* Adjust to the newly activated transform */ | |
| mbedtls_ssl_update_out_pointers(ssl, ssl->transform_out); | |
| return 0; | |
| } | |
| /* | |
| * Retransmit the current flight of messages. | |
| */ | |
| int mbedtls_ssl_resend(mbedtls_ssl_context *ssl) | |
| { | |
| int ret = 0; | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("=> mbedtls_ssl_resend")); | |
| ret = mbedtls_ssl_flight_transmit(ssl); | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("<= mbedtls_ssl_resend")); | |
| return ret; | |
| } | |
| /* | |
| * Transmit or retransmit the current flight of messages. | |
| * | |
| * Need to remember the current message in case flush_output returns | |
| * WANT_WRITE, causing us to exit this function and come back later. | |
| * This function must be called until state is no longer SENDING. | |
| */ | |
| int mbedtls_ssl_flight_transmit(mbedtls_ssl_context *ssl) | |
| { | |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("=> mbedtls_ssl_flight_transmit")); | |
| if (ssl->handshake->retransmit_state != MBEDTLS_SSL_RETRANS_SENDING) { | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("initialise flight transmission")); | |
| ssl->handshake->cur_msg = ssl->handshake->flight; | |
| ssl->handshake->cur_msg_p = ssl->handshake->flight->p + 12; | |
| ret = ssl_swap_epochs(ssl); | |
| if (ret != 0) { | |
| return ret; | |
| } | |
| ssl->handshake->retransmit_state = MBEDTLS_SSL_RETRANS_SENDING; | |
| } | |
| while (ssl->handshake->cur_msg != NULL) { | |
| size_t max_frag_len; | |
| const mbedtls_ssl_flight_item * const cur = ssl->handshake->cur_msg; | |
| int const is_finished = | |
| (cur->type == MBEDTLS_SSL_MSG_HANDSHAKE && | |
| cur->p[0] == MBEDTLS_SSL_HS_FINISHED); | |
| int const force_flush = ssl->disable_datagram_packing == 1 ? | |
| SSL_FORCE_FLUSH : SSL_DONT_FORCE_FLUSH; | |
| /* Swap epochs before sending Finished: we can't do it after | |
| * sending ChangeCipherSpec, in case write returns WANT_READ. | |
| * Must be done before copying, may change out_msg pointer */ | |
| if (is_finished && ssl->handshake->cur_msg_p == (cur->p + 12)) { | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("swap epochs to send finished message")); | |
| ret = ssl_swap_epochs(ssl); | |
| if (ret != 0) { | |
| return ret; | |
| } | |
| } | |
| ret = ssl_get_remaining_payload_in_datagram(ssl); | |
| if (ret < 0) { | |
| return ret; | |
| } | |
| max_frag_len = (size_t) ret; | |
| /* CCS is copied as is, while HS messages may need fragmentation */ | |
| if (cur->type == MBEDTLS_SSL_MSG_CHANGE_CIPHER_SPEC) { | |
| if (max_frag_len == 0) { | |
| if ((ret = mbedtls_ssl_flush_output(ssl)) != 0) { | |
| return ret; | |
| } | |
| continue; | |
| } | |
| memcpy(ssl->out_msg, cur->p, cur->len); | |
| ssl->out_msglen = cur->len; | |
| ssl->out_msgtype = cur->type; | |
| /* Update position inside current message */ | |
| ssl->handshake->cur_msg_p += cur->len; | |
| } else { | |
| const unsigned char * const p = ssl->handshake->cur_msg_p; | |
| const size_t hs_len = cur->len - 12; | |
| const size_t frag_off = p - (cur->p + 12); | |
| const size_t rem_len = hs_len - frag_off; | |
| size_t cur_hs_frag_len, max_hs_frag_len; | |
| if ((max_frag_len < 12) || (max_frag_len == 12 && hs_len != 0)) { | |
| if (is_finished) { | |
| ret = ssl_swap_epochs(ssl); | |
| if (ret != 0) { | |
| return ret; | |
| } | |
| } | |
| if ((ret = mbedtls_ssl_flush_output(ssl)) != 0) { | |
| return ret; | |
| } | |
| continue; | |
| } | |
| max_hs_frag_len = max_frag_len - 12; | |
| cur_hs_frag_len = rem_len > max_hs_frag_len ? | |
| max_hs_frag_len : rem_len; | |
| if (frag_off == 0 && cur_hs_frag_len != hs_len) { | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("fragmenting handshake message (%u > %u)", | |
| (unsigned) cur_hs_frag_len, | |
| (unsigned) max_hs_frag_len)); | |
| } | |
| /* Messages are stored with handshake headers as if not fragmented, | |
| * copy beginning of headers then fill fragmentation fields. | |
| * Handshake headers: type(1) len(3) seq(2) f_off(3) f_len(3) */ | |
| memcpy(ssl->out_msg, cur->p, 6); | |
| ssl->out_msg[6] = MBEDTLS_BYTE_2(frag_off); | |
| ssl->out_msg[7] = MBEDTLS_BYTE_1(frag_off); | |
| ssl->out_msg[8] = MBEDTLS_BYTE_0(frag_off); | |
| ssl->out_msg[9] = MBEDTLS_BYTE_2(cur_hs_frag_len); | |
| ssl->out_msg[10] = MBEDTLS_BYTE_1(cur_hs_frag_len); | |
| ssl->out_msg[11] = MBEDTLS_BYTE_0(cur_hs_frag_len); | |
| MBEDTLS_SSL_DEBUG_BUF(3, "handshake header", ssl->out_msg, 12); | |
| /* Copy the handshake message content and set records fields */ | |
| memcpy(ssl->out_msg + 12, p, cur_hs_frag_len); | |
| ssl->out_msglen = cur_hs_frag_len + 12; | |
| ssl->out_msgtype = cur->type; | |
| /* Update position inside current message */ | |
| ssl->handshake->cur_msg_p += cur_hs_frag_len; | |
| } | |
| /* If done with the current message move to the next one if any */ | |
| if (ssl->handshake->cur_msg_p >= cur->p + cur->len) { | |
| if (cur->next != NULL) { | |
| ssl->handshake->cur_msg = cur->next; | |
| ssl->handshake->cur_msg_p = cur->next->p + 12; | |
| } else { | |
| ssl->handshake->cur_msg = NULL; | |
| ssl->handshake->cur_msg_p = NULL; | |
| } | |
| } | |
| /* Actually send the message out */ | |
| if ((ret = mbedtls_ssl_write_record(ssl, force_flush)) != 0) { | |
| MBEDTLS_SSL_DEBUG_RET(1, "mbedtls_ssl_write_record", ret); | |
| return ret; | |
| } | |
| } | |
| if ((ret = mbedtls_ssl_flush_output(ssl)) != 0) { | |
| return ret; | |
| } | |
| /* Update state and set timer */ | |
| if (mbedtls_ssl_is_handshake_over(ssl) == 1) { | |
| ssl->handshake->retransmit_state = MBEDTLS_SSL_RETRANS_FINISHED; | |
| } else { | |
| ssl->handshake->retransmit_state = MBEDTLS_SSL_RETRANS_WAITING; | |
| mbedtls_ssl_set_timer(ssl, ssl->handshake->retransmit_timeout); | |
| } | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("<= mbedtls_ssl_flight_transmit")); | |
| return 0; | |
| } | |
| /* | |
| * To be called when the last message of an incoming flight is received. | |
| */ | |
| void mbedtls_ssl_recv_flight_completed(mbedtls_ssl_context *ssl) | |
| { | |
| /* We won't need to resend that one any more */ | |
| mbedtls_ssl_flight_free(ssl->handshake->flight); | |
| ssl->handshake->flight = NULL; | |
| ssl->handshake->cur_msg = NULL; | |
| /* The next incoming flight will start with this msg_seq */ | |
| ssl->handshake->in_flight_start_seq = ssl->handshake->in_msg_seq; | |
| /* We don't want to remember CCS's across flight boundaries. */ | |
| ssl->handshake->buffering.seen_ccs = 0; | |
| /* Clear future message buffering structure. */ | |
| mbedtls_ssl_buffering_free(ssl); | |
| /* Cancel timer */ | |
| mbedtls_ssl_set_timer(ssl, 0); | |
| if (ssl->in_msgtype == MBEDTLS_SSL_MSG_HANDSHAKE && | |
| ssl->in_msg[0] == MBEDTLS_SSL_HS_FINISHED) { | |
| ssl->handshake->retransmit_state = MBEDTLS_SSL_RETRANS_FINISHED; | |
| } else { | |
| ssl->handshake->retransmit_state = MBEDTLS_SSL_RETRANS_PREPARING; | |
| } | |
| } | |
| /* | |
| * To be called when the last message of an outgoing flight is send. | |
| */ | |
| void mbedtls_ssl_send_flight_completed(mbedtls_ssl_context *ssl) | |
| { | |
| ssl_reset_retransmit_timeout(ssl); | |
| mbedtls_ssl_set_timer(ssl, ssl->handshake->retransmit_timeout); | |
| if (ssl->in_msgtype == MBEDTLS_SSL_MSG_HANDSHAKE && | |
| ssl->in_msg[0] == MBEDTLS_SSL_HS_FINISHED) { | |
| ssl->handshake->retransmit_state = MBEDTLS_SSL_RETRANS_FINISHED; | |
| } else { | |
| ssl->handshake->retransmit_state = MBEDTLS_SSL_RETRANS_WAITING; | |
| } | |
| } | |
| #endif /* MBEDTLS_SSL_PROTO_DTLS */ | |
| /* | |
| * Handshake layer functions | |
| */ | |
| int mbedtls_ssl_start_handshake_msg(mbedtls_ssl_context *ssl, unsigned hs_type, | |
| unsigned char **buf, size_t *buf_len) | |
| { | |
| /* | |
| * Reserve 4 bytes for handshake header. ( Section 4,RFC 8446 ) | |
| * ... | |
| * HandshakeType msg_type; | |
| * uint24 length; | |
| * ... | |
| */ | |
| *buf = ssl->out_msg + 4; | |
| *buf_len = MBEDTLS_SSL_OUT_CONTENT_LEN - 4; | |
| ssl->out_msgtype = MBEDTLS_SSL_MSG_HANDSHAKE; | |
| ssl->out_msg[0] = hs_type; | |
| return 0; | |
| } | |
| /* | |
| * Write (DTLS: or queue) current handshake (including CCS) message. | |
| * | |
| * - fill in handshake headers | |
| * - update handshake checksum | |
| * - DTLS: save message for resending | |
| * - then pass to the record layer | |
| * | |
| * DTLS: except for HelloRequest, messages are only queued, and will only be | |
| * actually sent when calling flight_transmit() or resend(). | |
| * | |
| * Inputs: | |
| * - ssl->out_msglen: 4 + actual handshake message len | |
| * (4 is the size of handshake headers for TLS) | |
| * - ssl->out_msg[0]: the handshake type (ClientHello, ServerHello, etc) | |
| * - ssl->out_msg + 4: the handshake message body | |
| * | |
| * Outputs, ie state before passing to flight_append() or write_record(): | |
| * - ssl->out_msglen: the length of the record contents | |
| * (including handshake headers but excluding record headers) | |
| * - ssl->out_msg: the record contents (handshake headers + content) | |
| */ | |
| int mbedtls_ssl_write_handshake_msg_ext(mbedtls_ssl_context *ssl, | |
| int update_checksum, | |
| int force_flush) | |
| { | |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; | |
| const size_t hs_len = ssl->out_msglen - 4; | |
| const unsigned char hs_type = ssl->out_msg[0]; | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("=> write handshake message")); | |
| /* | |
| * Sanity checks | |
| */ | |
| if (ssl->out_msgtype != MBEDTLS_SSL_MSG_HANDSHAKE && | |
| ssl->out_msgtype != MBEDTLS_SSL_MSG_CHANGE_CIPHER_SPEC) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("should never happen")); | |
| return MBEDTLS_ERR_SSL_INTERNAL_ERROR; | |
| } | |
| /* Whenever we send anything different from a | |
| * HelloRequest we should be in a handshake - double check. */ | |
| if (!(ssl->out_msgtype == MBEDTLS_SSL_MSG_HANDSHAKE && | |
| hs_type == MBEDTLS_SSL_HS_HELLO_REQUEST) && | |
| ssl->handshake == NULL) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("should never happen")); | |
| return MBEDTLS_ERR_SSL_INTERNAL_ERROR; | |
| } | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| if (ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM && | |
| ssl->handshake != NULL && | |
| ssl->handshake->retransmit_state == MBEDTLS_SSL_RETRANS_SENDING) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("should never happen")); | |
| return MBEDTLS_ERR_SSL_INTERNAL_ERROR; | |
| } | |
| #endif | |
| /* Double-check that we did not exceed the bounds | |
| * of the outgoing record buffer. | |
| * This should never fail as the various message | |
| * writing functions must obey the bounds of the | |
| * outgoing record buffer, but better be safe. | |
| * | |
| * Note: We deliberately do not check for the MTU or MFL here. | |
| */ | |
| if (ssl->out_msglen > MBEDTLS_SSL_OUT_CONTENT_LEN) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("Record too large: " | |
| "size %" MBEDTLS_PRINTF_SIZET | |
| ", maximum %" MBEDTLS_PRINTF_SIZET, | |
| ssl->out_msglen, | |
| (size_t) MBEDTLS_SSL_OUT_CONTENT_LEN)); | |
| return MBEDTLS_ERR_SSL_INTERNAL_ERROR; | |
| } | |
| /* | |
| * Fill handshake headers | |
| */ | |
| if (ssl->out_msgtype == MBEDTLS_SSL_MSG_HANDSHAKE) { | |
| ssl->out_msg[1] = MBEDTLS_BYTE_2(hs_len); | |
| ssl->out_msg[2] = MBEDTLS_BYTE_1(hs_len); | |
| ssl->out_msg[3] = MBEDTLS_BYTE_0(hs_len); | |
| /* | |
| * DTLS has additional fields in the Handshake layer, | |
| * between the length field and the actual payload: | |
| * uint16 message_seq; | |
| * uint24 fragment_offset; | |
| * uint24 fragment_length; | |
| */ | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| if (ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM) { | |
| /* Make room for the additional DTLS fields */ | |
| if (MBEDTLS_SSL_OUT_CONTENT_LEN - ssl->out_msglen < 8) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("DTLS handshake message too large: " | |
| "size %" MBEDTLS_PRINTF_SIZET ", maximum %" | |
| MBEDTLS_PRINTF_SIZET, | |
| hs_len, | |
| (size_t) (MBEDTLS_SSL_OUT_CONTENT_LEN - 12))); | |
| return MBEDTLS_ERR_SSL_BAD_INPUT_DATA; | |
| } | |
| memmove(ssl->out_msg + 12, ssl->out_msg + 4, hs_len); | |
| ssl->out_msglen += 8; | |
| /* Write message_seq and update it, except for HelloRequest */ | |
| if (hs_type != MBEDTLS_SSL_HS_HELLO_REQUEST) { | |
| MBEDTLS_PUT_UINT16_BE(ssl->handshake->out_msg_seq, ssl->out_msg, 4); | |
| ++(ssl->handshake->out_msg_seq); | |
| } else { | |
| ssl->out_msg[4] = 0; | |
| ssl->out_msg[5] = 0; | |
| } | |
| /* Handshake hashes are computed without fragmentation, | |
| * so set frag_offset = 0 and frag_len = hs_len for now */ | |
| memset(ssl->out_msg + 6, 0x00, 3); | |
| memcpy(ssl->out_msg + 9, ssl->out_msg + 1, 3); | |
| } | |
| #endif /* MBEDTLS_SSL_PROTO_DTLS */ | |
| /* Update running hashes of handshake messages seen */ | |
| if (hs_type != MBEDTLS_SSL_HS_HELLO_REQUEST && update_checksum != 0) { | |
| ret = ssl->handshake->update_checksum(ssl, ssl->out_msg, | |
| ssl->out_msglen); | |
| if (ret != 0) { | |
| MBEDTLS_SSL_DEBUG_RET(1, "update_checksum", ret); | |
| return ret; | |
| } | |
| } | |
| } | |
| /* Either send now, or just save to be sent (and resent) later */ | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| if (ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM && | |
| !(ssl->out_msgtype == MBEDTLS_SSL_MSG_HANDSHAKE && | |
| hs_type == MBEDTLS_SSL_HS_HELLO_REQUEST)) { | |
| if ((ret = ssl_flight_append(ssl)) != 0) { | |
| MBEDTLS_SSL_DEBUG_RET(1, "ssl_flight_append", ret); | |
| return ret; | |
| } | |
| } else | |
| #endif | |
| { | |
| if ((ret = mbedtls_ssl_write_record(ssl, force_flush)) != 0) { | |
| MBEDTLS_SSL_DEBUG_RET(1, "ssl_write_record", ret); | |
| return ret; | |
| } | |
| } | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("<= write handshake message")); | |
| return 0; | |
| } | |
| int mbedtls_ssl_finish_handshake_msg(mbedtls_ssl_context *ssl, | |
| size_t buf_len, size_t msg_len) | |
| { | |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; | |
| size_t msg_with_header_len; | |
| ((void) buf_len); | |
| /* Add reserved 4 bytes for handshake header */ | |
| msg_with_header_len = msg_len + 4; | |
| ssl->out_msglen = msg_with_header_len; | |
| MBEDTLS_SSL_PROC_CHK(mbedtls_ssl_write_handshake_msg_ext(ssl, 0, 0)); | |
| cleanup: | |
| return ret; | |
| } | |
| /* | |
| * Record layer functions | |
| */ | |
| /* | |
| * Write current record. | |
| * | |
| * Uses: | |
| * - ssl->out_msgtype: type of the message (AppData, Handshake, Alert, CCS) | |
| * - ssl->out_msglen: length of the record content (excl headers) | |
| * - ssl->out_msg: record content | |
| */ | |
| int mbedtls_ssl_write_record(mbedtls_ssl_context *ssl, int force_flush) | |
| { | |
| int ret, done = 0; | |
| size_t len = ssl->out_msglen; | |
| int flush = force_flush; | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("=> write record")); | |
| if (!done) { | |
| unsigned i; | |
| size_t protected_record_size; | |
| #if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH) | |
| size_t out_buf_len = ssl->out_buf_len; | |
| #else | |
| size_t out_buf_len = MBEDTLS_SSL_OUT_BUFFER_LEN; | |
| #endif | |
| /* Skip writing the record content type to after the encryption, | |
| * as it may change when using the CID extension. */ | |
| mbedtls_ssl_protocol_version tls_ver = ssl->tls_version; | |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_3) | |
| /* TLS 1.3 still uses the TLS 1.2 version identifier | |
| * for backwards compatibility. */ | |
| if (tls_ver == MBEDTLS_SSL_VERSION_TLS1_3) { | |
| tls_ver = MBEDTLS_SSL_VERSION_TLS1_2; | |
| } | |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_3 */ | |
| mbedtls_ssl_write_version(ssl->out_hdr + 1, ssl->conf->transport, | |
| tls_ver); | |
| memcpy(ssl->out_ctr, ssl->cur_out_ctr, MBEDTLS_SSL_SEQUENCE_NUMBER_LEN); | |
| MBEDTLS_PUT_UINT16_BE(len, ssl->out_len, 0); | |
| if (ssl->transform_out != NULL) { | |
| mbedtls_record rec; | |
| rec.buf = ssl->out_iv; | |
| rec.buf_len = out_buf_len - (ssl->out_iv - ssl->out_buf); | |
| rec.data_len = ssl->out_msglen; | |
| rec.data_offset = ssl->out_msg - rec.buf; | |
| memcpy(&rec.ctr[0], ssl->out_ctr, sizeof(rec.ctr)); | |
| mbedtls_ssl_write_version(rec.ver, ssl->conf->transport, tls_ver); | |
| rec.type = ssl->out_msgtype; | |
| #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) | |
| /* The CID is set by mbedtls_ssl_encrypt_buf(). */ | |
| rec.cid_len = 0; | |
| #endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ | |
| if ((ret = mbedtls_ssl_encrypt_buf(ssl, ssl->transform_out, &rec, | |
| ssl->conf->f_rng, ssl->conf->p_rng)) != 0) { | |
| MBEDTLS_SSL_DEBUG_RET(1, "ssl_encrypt_buf", ret); | |
| return ret; | |
| } | |
| if (rec.data_offset != 0) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("should never happen")); | |
| return MBEDTLS_ERR_SSL_INTERNAL_ERROR; | |
| } | |
| /* Update the record content type and CID. */ | |
| ssl->out_msgtype = rec.type; | |
| #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) | |
| memcpy(ssl->out_cid, rec.cid, rec.cid_len); | |
| #endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ | |
| ssl->out_msglen = len = rec.data_len; | |
| MBEDTLS_PUT_UINT16_BE(rec.data_len, ssl->out_len, 0); | |
| } | |
| protected_record_size = len + mbedtls_ssl_out_hdr_len(ssl); | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| /* In case of DTLS, double-check that we don't exceed | |
| * the remaining space in the datagram. */ | |
| if (ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM) { | |
| ret = ssl_get_remaining_space_in_datagram(ssl); | |
| if (ret < 0) { | |
| return ret; | |
| } | |
| if (protected_record_size > (size_t) ret) { | |
| /* Should never happen */ | |
| return MBEDTLS_ERR_SSL_INTERNAL_ERROR; | |
| } | |
| } | |
| #endif /* MBEDTLS_SSL_PROTO_DTLS */ | |
| /* Now write the potentially updated record content type. */ | |
| ssl->out_hdr[0] = (unsigned char) ssl->out_msgtype; | |
| MBEDTLS_SSL_DEBUG_MSG(3, ("output record: msgtype = %u, " | |
| "version = [%u:%u], msglen = %" MBEDTLS_PRINTF_SIZET, | |
| ssl->out_hdr[0], ssl->out_hdr[1], | |
| ssl->out_hdr[2], len)); | |
| MBEDTLS_SSL_DEBUG_BUF(4, "output record sent to network", | |
| ssl->out_hdr, protected_record_size); | |
| ssl->out_left += protected_record_size; | |
| ssl->out_hdr += protected_record_size; | |
| mbedtls_ssl_update_out_pointers(ssl, ssl->transform_out); | |
| for (i = 8; i > mbedtls_ssl_ep_len(ssl); i--) { | |
| if (++ssl->cur_out_ctr[i - 1] != 0) { | |
| break; | |
| } | |
| } | |
| /* The loop goes to its end if the counter is wrapping */ | |
| if (i == mbedtls_ssl_ep_len(ssl)) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("outgoing message counter would wrap")); | |
| return MBEDTLS_ERR_SSL_COUNTER_WRAPPING; | |
| } | |
| } | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| if (ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM && | |
| flush == SSL_DONT_FORCE_FLUSH) { | |
| size_t remaining; | |
| ret = ssl_get_remaining_payload_in_datagram(ssl); | |
| if (ret < 0) { | |
| MBEDTLS_SSL_DEBUG_RET(1, "ssl_get_remaining_payload_in_datagram", | |
| ret); | |
| return ret; | |
| } | |
| remaining = (size_t) ret; | |
| if (remaining == 0) { | |
| flush = SSL_FORCE_FLUSH; | |
| } else { | |
| MBEDTLS_SSL_DEBUG_MSG(2, | |
| ("Still %u bytes available in current datagram", | |
| (unsigned) remaining)); | |
| } | |
| } | |
| #endif /* MBEDTLS_SSL_PROTO_DTLS */ | |
| if ((flush == SSL_FORCE_FLUSH) && | |
| (ret = mbedtls_ssl_flush_output(ssl)) != 0) { | |
| MBEDTLS_SSL_DEBUG_RET(1, "mbedtls_ssl_flush_output", ret); | |
| return ret; | |
| } | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("<= write record")); | |
| return 0; | |
| } | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_hs_is_proper_fragment(mbedtls_ssl_context *ssl) | |
| { | |
| if (ssl->in_msglen < ssl->in_hslen || | |
| memcmp(ssl->in_msg + 6, "\0\0\0", 3) != 0 || | |
| memcmp(ssl->in_msg + 9, ssl->in_msg + 1, 3) != 0) { | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| static uint32_t ssl_get_hs_frag_len(mbedtls_ssl_context const *ssl) | |
| { | |
| return (ssl->in_msg[9] << 16) | | |
| (ssl->in_msg[10] << 8) | | |
| ssl->in_msg[11]; | |
| } | |
| static uint32_t ssl_get_hs_frag_off(mbedtls_ssl_context const *ssl) | |
| { | |
| return (ssl->in_msg[6] << 16) | | |
| (ssl->in_msg[7] << 8) | | |
| ssl->in_msg[8]; | |
| } | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_check_hs_header(mbedtls_ssl_context const *ssl) | |
| { | |
| uint32_t msg_len, frag_off, frag_len; | |
| msg_len = ssl_get_hs_total_len(ssl); | |
| frag_off = ssl_get_hs_frag_off(ssl); | |
| frag_len = ssl_get_hs_frag_len(ssl); | |
| if (frag_off > msg_len) { | |
| return -1; | |
| } | |
| if (frag_len > msg_len - frag_off) { | |
| return -1; | |
| } | |
| if (frag_len + 12 > ssl->in_msglen) { | |
| return -1; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Mark bits in bitmask (used for DTLS HS reassembly) | |
| */ | |
| static void ssl_bitmask_set(unsigned char *mask, size_t offset, size_t len) | |
| { | |
| unsigned int start_bits, end_bits; | |
| start_bits = 8 - (offset % 8); | |
| if (start_bits != 8) { | |
| size_t first_byte_idx = offset / 8; | |
| /* Special case */ | |
| if (len <= start_bits) { | |
| for (; len != 0; len--) { | |
| mask[first_byte_idx] |= 1 << (start_bits - len); | |
| } | |
| /* Avoid potential issues with offset or len becoming invalid */ | |
| return; | |
| } | |
| offset += start_bits; /* Now offset % 8 == 0 */ | |
| len -= start_bits; | |
| for (; start_bits != 0; start_bits--) { | |
| mask[first_byte_idx] |= 1 << (start_bits - 1); | |
| } | |
| } | |
| end_bits = len % 8; | |
| if (end_bits != 0) { | |
| size_t last_byte_idx = (offset + len) / 8; | |
| len -= end_bits; /* Now len % 8 == 0 */ | |
| for (; end_bits != 0; end_bits--) { | |
| mask[last_byte_idx] |= 1 << (8 - end_bits); | |
| } | |
| } | |
| memset(mask + offset / 8, 0xFF, len / 8); | |
| } | |
| /* | |
| * Check that bitmask is full | |
| */ | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_bitmask_check(unsigned char *mask, size_t len) | |
| { | |
| size_t i; | |
| for (i = 0; i < len / 8; i++) { | |
| if (mask[i] != 0xFF) { | |
| return -1; | |
| } | |
| } | |
| for (i = 0; i < len % 8; i++) { | |
| if ((mask[len / 8] & (1 << (7 - i))) == 0) { | |
| return -1; | |
| } | |
| } | |
| return 0; | |
| } | |
| /* msg_len does not include the handshake header */ | |
| static size_t ssl_get_reassembly_buffer_size(size_t msg_len, | |
| unsigned add_bitmap) | |
| { | |
| size_t alloc_len; | |
| alloc_len = 12; /* Handshake header */ | |
| alloc_len += msg_len; /* Content buffer */ | |
| if (add_bitmap) { | |
| alloc_len += msg_len / 8 + (msg_len % 8 != 0); /* Bitmap */ | |
| } | |
| return alloc_len; | |
| } | |
| #endif /* MBEDTLS_SSL_PROTO_DTLS */ | |
| static uint32_t ssl_get_hs_total_len(mbedtls_ssl_context const *ssl) | |
| { | |
| return (ssl->in_msg[1] << 16) | | |
| (ssl->in_msg[2] << 8) | | |
| ssl->in_msg[3]; | |
| } | |
| int mbedtls_ssl_prepare_handshake_record(mbedtls_ssl_context *ssl) | |
| { | |
| if (ssl->in_msglen < mbedtls_ssl_hs_hdr_len(ssl)) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("handshake message too short: %" MBEDTLS_PRINTF_SIZET, | |
| ssl->in_msglen)); | |
| return MBEDTLS_ERR_SSL_INVALID_RECORD; | |
| } | |
| ssl->in_hslen = mbedtls_ssl_hs_hdr_len(ssl) + ssl_get_hs_total_len(ssl); | |
| MBEDTLS_SSL_DEBUG_MSG(3, ("handshake message: msglen =" | |
| " %" MBEDTLS_PRINTF_SIZET ", type = %u, hslen = %" | |
| MBEDTLS_PRINTF_SIZET, | |
| ssl->in_msglen, ssl->in_msg[0], ssl->in_hslen)); | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| if (ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM) { | |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; | |
| unsigned int recv_msg_seq = (ssl->in_msg[4] << 8) | ssl->in_msg[5]; | |
| if (ssl_check_hs_header(ssl) != 0) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("invalid handshake header")); | |
| return MBEDTLS_ERR_SSL_INVALID_RECORD; | |
| } | |
| if (ssl->handshake != NULL && | |
| ((mbedtls_ssl_is_handshake_over(ssl) == 0 && | |
| recv_msg_seq != ssl->handshake->in_msg_seq) || | |
| (mbedtls_ssl_is_handshake_over(ssl) == 1 && | |
| ssl->in_msg[0] != MBEDTLS_SSL_HS_CLIENT_HELLO))) { | |
| if (recv_msg_seq > ssl->handshake->in_msg_seq) { | |
| MBEDTLS_SSL_DEBUG_MSG(2, | |
| ( | |
| "received future handshake message of sequence number %u (next %u)", | |
| recv_msg_seq, | |
| ssl->handshake->in_msg_seq)); | |
| return MBEDTLS_ERR_SSL_EARLY_MESSAGE; | |
| } | |
| /* Retransmit only on last message from previous flight, to avoid | |
| * too many retransmissions. | |
| * Besides, No sane server ever retransmits HelloVerifyRequest */ | |
| if (recv_msg_seq == ssl->handshake->in_flight_start_seq - 1 && | |
| ssl->in_msg[0] != MBEDTLS_SSL_HS_HELLO_VERIFY_REQUEST) { | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("received message from last flight, " | |
| "message_seq = %u, start_of_flight = %u", | |
| recv_msg_seq, | |
| ssl->handshake->in_flight_start_seq)); | |
| if ((ret = mbedtls_ssl_resend(ssl)) != 0) { | |
| MBEDTLS_SSL_DEBUG_RET(1, "mbedtls_ssl_resend", ret); | |
| return ret; | |
| } | |
| } else { | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("dropping out-of-sequence message: " | |
| "message_seq = %u, expected = %u", | |
| recv_msg_seq, | |
| ssl->handshake->in_msg_seq)); | |
| } | |
| return MBEDTLS_ERR_SSL_CONTINUE_PROCESSING; | |
| } | |
| /* Wait until message completion to increment in_msg_seq */ | |
| /* Message reassembly is handled alongside buffering of future | |
| * messages; the commonality is that both handshake fragments and | |
| * future messages cannot be forwarded immediately to the | |
| * handshake logic layer. */ | |
| if (ssl_hs_is_proper_fragment(ssl) == 1) { | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("found fragmented DTLS handshake message")); | |
| return MBEDTLS_ERR_SSL_EARLY_MESSAGE; | |
| } | |
| } else | |
| #endif /* MBEDTLS_SSL_PROTO_DTLS */ | |
| /* With TLS we don't handle fragmentation (for now) */ | |
| if (ssl->in_msglen < ssl->in_hslen) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("TLS handshake fragmentation not supported")); | |
| return MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE; | |
| } | |
| return 0; | |
| } | |
| int mbedtls_ssl_update_handshake_status(mbedtls_ssl_context *ssl) | |
| { | |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; | |
| mbedtls_ssl_handshake_params * const hs = ssl->handshake; | |
| if (mbedtls_ssl_is_handshake_over(ssl) == 0 && hs != NULL) { | |
| ret = ssl->handshake->update_checksum(ssl, ssl->in_msg, ssl->in_hslen); | |
| if (ret != 0) { | |
| MBEDTLS_SSL_DEBUG_RET(1, "update_checksum", ret); | |
| return ret; | |
| } | |
| } | |
| /* Handshake message is complete, increment counter */ | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| if (ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM && | |
| ssl->handshake != NULL) { | |
| unsigned offset; | |
| mbedtls_ssl_hs_buffer *hs_buf; | |
| /* Increment handshake sequence number */ | |
| hs->in_msg_seq++; | |
| /* | |
| * Clear up handshake buffering and reassembly structure. | |
| */ | |
| /* Free first entry */ | |
| ssl_buffering_free_slot(ssl, 0); | |
| /* Shift all other entries */ | |
| for (offset = 0, hs_buf = &hs->buffering.hs[0]; | |
| offset + 1 < MBEDTLS_SSL_MAX_BUFFERED_HS; | |
| offset++, hs_buf++) { | |
| *hs_buf = *(hs_buf + 1); | |
| } | |
| /* Create a fresh last entry */ | |
| memset(hs_buf, 0, sizeof(mbedtls_ssl_hs_buffer)); | |
| } | |
| #endif | |
| return 0; | |
| } | |
| /* | |
| * DTLS anti-replay: RFC 6347 4.1.2.6 | |
| * | |
| * in_window is a field of bits numbered from 0 (lsb) to 63 (msb). | |
| * Bit n is set iff record number in_window_top - n has been seen. | |
| * | |
| * Usually, in_window_top is the last record number seen and the lsb of | |
| * in_window is set. The only exception is the initial state (record number 0 | |
| * not seen yet). | |
| */ | |
| #if defined(MBEDTLS_SSL_DTLS_ANTI_REPLAY) | |
| void mbedtls_ssl_dtls_replay_reset(mbedtls_ssl_context *ssl) | |
| { | |
| ssl->in_window_top = 0; | |
| ssl->in_window = 0; | |
| } | |
| static inline uint64_t ssl_load_six_bytes(unsigned char *buf) | |
| { | |
| return ((uint64_t) buf[0] << 40) | | |
| ((uint64_t) buf[1] << 32) | | |
| ((uint64_t) buf[2] << 24) | | |
| ((uint64_t) buf[3] << 16) | | |
| ((uint64_t) buf[4] << 8) | | |
| ((uint64_t) buf[5]); | |
| } | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int mbedtls_ssl_dtls_record_replay_check(mbedtls_ssl_context *ssl, uint8_t *record_in_ctr) | |
| { | |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; | |
| unsigned char *original_in_ctr; | |
| // save original in_ctr | |
| original_in_ctr = ssl->in_ctr; | |
| // use counter from record | |
| ssl->in_ctr = record_in_ctr; | |
| ret = mbedtls_ssl_dtls_replay_check((mbedtls_ssl_context const *) ssl); | |
| // restore the counter | |
| ssl->in_ctr = original_in_ctr; | |
| return ret; | |
| } | |
| /* | |
| * Return 0 if sequence number is acceptable, -1 otherwise | |
| */ | |
| int mbedtls_ssl_dtls_replay_check(mbedtls_ssl_context const *ssl) | |
| { | |
| uint64_t rec_seqnum = ssl_load_six_bytes(ssl->in_ctr + 2); | |
| uint64_t bit; | |
| if (ssl->conf->anti_replay == MBEDTLS_SSL_ANTI_REPLAY_DISABLED) { | |
| return 0; | |
| } | |
| if (rec_seqnum > ssl->in_window_top) { | |
| return 0; | |
| } | |
| bit = ssl->in_window_top - rec_seqnum; | |
| if (bit >= 64) { | |
| return -1; | |
| } | |
| if ((ssl->in_window & ((uint64_t) 1 << bit)) != 0) { | |
| return -1; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Update replay window on new validated record | |
| */ | |
| void mbedtls_ssl_dtls_replay_update(mbedtls_ssl_context *ssl) | |
| { | |
| uint64_t rec_seqnum = ssl_load_six_bytes(ssl->in_ctr + 2); | |
| if (ssl->conf->anti_replay == MBEDTLS_SSL_ANTI_REPLAY_DISABLED) { | |
| return; | |
| } | |
| if (rec_seqnum > ssl->in_window_top) { | |
| /* Update window_top and the contents of the window */ | |
| uint64_t shift = rec_seqnum - ssl->in_window_top; | |
| if (shift >= 64) { | |
| ssl->in_window = 1; | |
| } else { | |
| ssl->in_window <<= shift; | |
| ssl->in_window |= 1; | |
| } | |
| ssl->in_window_top = rec_seqnum; | |
| } else { | |
| /* Mark that number as seen in the current window */ | |
| uint64_t bit = ssl->in_window_top - rec_seqnum; | |
| if (bit < 64) { /* Always true, but be extra sure */ | |
| ssl->in_window |= (uint64_t) 1 << bit; | |
| } | |
| } | |
| } | |
| #endif /* MBEDTLS_SSL_DTLS_ANTI_REPLAY */ | |
| #if defined(MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE) && defined(MBEDTLS_SSL_SRV_C) | |
| /* | |
| * Check if a datagram looks like a ClientHello with a valid cookie, | |
| * and if it doesn't, generate a HelloVerifyRequest message. | |
| * Both input and output include full DTLS headers. | |
| * | |
| * - if cookie is valid, return 0 | |
| * - if ClientHello looks superficially valid but cookie is not, | |
| * fill obuf and set olen, then | |
| * return MBEDTLS_ERR_SSL_HELLO_VERIFY_REQUIRED | |
| * - otherwise return a specific error code | |
| */ | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| MBEDTLS_STATIC_TESTABLE | |
| int mbedtls_ssl_check_dtls_clihlo_cookie( | |
| mbedtls_ssl_context *ssl, | |
| const unsigned char *cli_id, size_t cli_id_len, | |
| const unsigned char *in, size_t in_len, | |
| unsigned char *obuf, size_t buf_len, size_t *olen) | |
| { | |
| size_t sid_len, cookie_len, epoch, fragment_offset; | |
| unsigned char *p; | |
| /* | |
| * Structure of ClientHello with record and handshake headers, | |
| * and expected values. We don't need to check a lot, more checks will be | |
| * done when actually parsing the ClientHello - skipping those checks | |
| * avoids code duplication and does not make cookie forging any easier. | |
| * | |
| * 0-0 ContentType type; copied, must be handshake | |
| * 1-2 ProtocolVersion version; copied | |
| * 3-4 uint16 epoch; copied, must be 0 | |
| * 5-10 uint48 sequence_number; copied | |
| * 11-12 uint16 length; (ignored) | |
| * | |
| * 13-13 HandshakeType msg_type; (ignored) | |
| * 14-16 uint24 length; (ignored) | |
| * 17-18 uint16 message_seq; copied | |
| * 19-21 uint24 fragment_offset; copied, must be 0 | |
| * 22-24 uint24 fragment_length; (ignored) | |
| * | |
| * 25-26 ProtocolVersion client_version; (ignored) | |
| * 27-58 Random random; (ignored) | |
| * 59-xx SessionID session_id; 1 byte len + sid_len content | |
| * 60+ opaque cookie<0..2^8-1>; 1 byte len + content | |
| * ... | |
| * | |
| * Minimum length is 61 bytes. | |
| */ | |
| MBEDTLS_SSL_DEBUG_MSG(4, ("check cookie: in_len=%u", | |
| (unsigned) in_len)); | |
| MBEDTLS_SSL_DEBUG_BUF(4, "cli_id", cli_id, cli_id_len); | |
| if (in_len < 61) { | |
| MBEDTLS_SSL_DEBUG_MSG(4, ("check cookie: record too short")); | |
| return MBEDTLS_ERR_SSL_DECODE_ERROR; | |
| } | |
| epoch = MBEDTLS_GET_UINT16_BE(in, 3); | |
| fragment_offset = MBEDTLS_GET_UINT24_BE(in, 19); | |
| if (in[0] != MBEDTLS_SSL_MSG_HANDSHAKE || epoch != 0 || | |
| fragment_offset != 0) { | |
| MBEDTLS_SSL_DEBUG_MSG(4, ("check cookie: not a good ClientHello")); | |
| MBEDTLS_SSL_DEBUG_MSG(4, (" type=%u epoch=%u fragment_offset=%u", | |
| in[0], (unsigned) epoch, | |
| (unsigned) fragment_offset)); | |
| return MBEDTLS_ERR_SSL_DECODE_ERROR; | |
| } | |
| sid_len = in[59]; | |
| if (59 + 1 + sid_len + 1 > in_len) { | |
| MBEDTLS_SSL_DEBUG_MSG(4, ("check cookie: sid_len=%u > %u", | |
| (unsigned) sid_len, | |
| (unsigned) in_len - 61)); | |
| return MBEDTLS_ERR_SSL_DECODE_ERROR; | |
| } | |
| MBEDTLS_SSL_DEBUG_BUF(4, "sid received from network", | |
| in + 60, sid_len); | |
| cookie_len = in[60 + sid_len]; | |
| if (59 + 1 + sid_len + 1 + cookie_len > in_len) { | |
| MBEDTLS_SSL_DEBUG_MSG(4, ("check cookie: cookie_len=%u > %u", | |
| (unsigned) cookie_len, | |
| (unsigned) (in_len - sid_len - 61))); | |
| return MBEDTLS_ERR_SSL_DECODE_ERROR; | |
| } | |
| MBEDTLS_SSL_DEBUG_BUF(4, "cookie received from network", | |
| in + sid_len + 61, cookie_len); | |
| if (ssl->conf->f_cookie_check(ssl->conf->p_cookie, | |
| in + sid_len + 61, cookie_len, | |
| cli_id, cli_id_len) == 0) { | |
| MBEDTLS_SSL_DEBUG_MSG(4, ("check cookie: valid")); | |
| return 0; | |
| } | |
| /* | |
| * If we get here, we've got an invalid cookie, let's prepare HVR. | |
| * | |
| * 0-0 ContentType type; copied | |
| * 1-2 ProtocolVersion version; copied | |
| * 3-4 uint16 epoch; copied | |
| * 5-10 uint48 sequence_number; copied | |
| * 11-12 uint16 length; olen - 13 | |
| * | |
| * 13-13 HandshakeType msg_type; hello_verify_request | |
| * 14-16 uint24 length; olen - 25 | |
| * 17-18 uint16 message_seq; copied | |
| * 19-21 uint24 fragment_offset; copied | |
| * 22-24 uint24 fragment_length; olen - 25 | |
| * | |
| * 25-26 ProtocolVersion server_version; 0xfe 0xff | |
| * 27-27 opaque cookie<0..2^8-1>; cookie_len = olen - 27, cookie | |
| * | |
| * Minimum length is 28. | |
| */ | |
| if (buf_len < 28) { | |
| return MBEDTLS_ERR_SSL_BUFFER_TOO_SMALL; | |
| } | |
| /* Copy most fields and adapt others */ | |
| memcpy(obuf, in, 25); | |
| obuf[13] = MBEDTLS_SSL_HS_HELLO_VERIFY_REQUEST; | |
| obuf[25] = 0xfe; | |
| obuf[26] = 0xff; | |
| /* Generate and write actual cookie */ | |
| p = obuf + 28; | |
| if (ssl->conf->f_cookie_write(ssl->conf->p_cookie, | |
| &p, obuf + buf_len, | |
| cli_id, cli_id_len) != 0) { | |
| return MBEDTLS_ERR_SSL_INTERNAL_ERROR; | |
| } | |
| *olen = p - obuf; | |
| /* Go back and fill length fields */ | |
| obuf[27] = (unsigned char) (*olen - 28); | |
| obuf[14] = obuf[22] = MBEDTLS_BYTE_2(*olen - 25); | |
| obuf[15] = obuf[23] = MBEDTLS_BYTE_1(*olen - 25); | |
| obuf[16] = obuf[24] = MBEDTLS_BYTE_0(*olen - 25); | |
| MBEDTLS_PUT_UINT16_BE(*olen - 13, obuf, 11); | |
| return MBEDTLS_ERR_SSL_HELLO_VERIFY_REQUIRED; | |
| } | |
| /* | |
| * Handle possible client reconnect with the same UDP quadruplet | |
| * (RFC 6347 Section 4.2.8). | |
| * | |
| * Called by ssl_parse_record_header() in case we receive an epoch 0 record | |
| * that looks like a ClientHello. | |
| * | |
| * - if the input looks like a ClientHello without cookies, | |
| * send back HelloVerifyRequest, then return 0 | |
| * - if the input looks like a ClientHello with a valid cookie, | |
| * reset the session of the current context, and | |
| * return MBEDTLS_ERR_SSL_CLIENT_RECONNECT | |
| * - if anything goes wrong, return a specific error code | |
| * | |
| * This function is called (through ssl_check_client_reconnect()) when an | |
| * unexpected record is found in ssl_get_next_record(), which will discard the | |
| * record if we return 0, and bubble up the return value otherwise (this | |
| * includes the case of MBEDTLS_ERR_SSL_CLIENT_RECONNECT and of unexpected | |
| * errors, and is the right thing to do in both cases). | |
| */ | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_handle_possible_reconnect(mbedtls_ssl_context *ssl) | |
| { | |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; | |
| size_t len; | |
| if (ssl->conf->f_cookie_write == NULL || | |
| ssl->conf->f_cookie_check == NULL) { | |
| /* If we can't use cookies to verify reachability of the peer, | |
| * drop the record. */ | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("no cookie callbacks, " | |
| "can't check reconnect validity")); | |
| return 0; | |
| } | |
| ret = mbedtls_ssl_check_dtls_clihlo_cookie( | |
| ssl, | |
| ssl->cli_id, ssl->cli_id_len, | |
| ssl->in_buf, ssl->in_left, | |
| ssl->out_buf, MBEDTLS_SSL_OUT_CONTENT_LEN, &len); | |
| MBEDTLS_SSL_DEBUG_RET(2, "mbedtls_ssl_check_dtls_clihlo_cookie", ret); | |
| if (ret == MBEDTLS_ERR_SSL_HELLO_VERIFY_REQUIRED) { | |
| int send_ret; | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("sending HelloVerifyRequest")); | |
| MBEDTLS_SSL_DEBUG_BUF(4, "output record sent to network", | |
| ssl->out_buf, len); | |
| /* Don't check write errors as we can't do anything here. | |
| * If the error is permanent we'll catch it later, | |
| * if it's not, then hopefully it'll work next time. */ | |
| send_ret = ssl->f_send(ssl->p_bio, ssl->out_buf, len); | |
| MBEDTLS_SSL_DEBUG_RET(2, "ssl->f_send", send_ret); | |
| (void) send_ret; | |
| return 0; | |
| } | |
| if (ret == 0) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("cookie is valid, resetting context")); | |
| if ((ret = mbedtls_ssl_session_reset_int(ssl, 1)) != 0) { | |
| MBEDTLS_SSL_DEBUG_RET(1, "reset", ret); | |
| return ret; | |
| } | |
| return MBEDTLS_ERR_SSL_CLIENT_RECONNECT; | |
| } | |
| return ret; | |
| } | |
| #endif /* MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE && MBEDTLS_SSL_SRV_C */ | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_check_record_type(uint8_t record_type) | |
| { | |
| if (record_type != MBEDTLS_SSL_MSG_HANDSHAKE && | |
| record_type != MBEDTLS_SSL_MSG_ALERT && | |
| record_type != MBEDTLS_SSL_MSG_CHANGE_CIPHER_SPEC && | |
| record_type != MBEDTLS_SSL_MSG_APPLICATION_DATA) { | |
| return MBEDTLS_ERR_SSL_INVALID_RECORD; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * ContentType type; | |
| * ProtocolVersion version; | |
| * uint16 epoch; // DTLS only | |
| * uint48 sequence_number; // DTLS only | |
| * uint16 length; | |
| * | |
| * Return 0 if header looks sane (and, for DTLS, the record is expected) | |
| * MBEDTLS_ERR_SSL_INVALID_RECORD if the header looks bad, | |
| * MBEDTLS_ERR_SSL_UNEXPECTED_RECORD (DTLS only) if sane but unexpected. | |
| * | |
| * With DTLS, mbedtls_ssl_read_record() will: | |
| * 1. proceed with the record if this function returns 0 | |
| * 2. drop only the current record if this function returns UNEXPECTED_RECORD | |
| * 3. return CLIENT_RECONNECT if this function return that value | |
| * 4. drop the whole datagram if this function returns anything else. | |
| * Point 2 is needed when the peer is resending, and we have already received | |
| * the first record from a datagram but are still waiting for the others. | |
| */ | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_parse_record_header(mbedtls_ssl_context const *ssl, | |
| unsigned char *buf, | |
| size_t len, | |
| mbedtls_record *rec) | |
| { | |
| mbedtls_ssl_protocol_version tls_version; | |
| size_t const rec_hdr_type_offset = 0; | |
| size_t const rec_hdr_type_len = 1; | |
| size_t const rec_hdr_version_offset = rec_hdr_type_offset + | |
| rec_hdr_type_len; | |
| size_t const rec_hdr_version_len = 2; | |
| size_t const rec_hdr_ctr_len = 8; | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| uint32_t rec_epoch; | |
| size_t const rec_hdr_ctr_offset = rec_hdr_version_offset + | |
| rec_hdr_version_len; | |
| #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) | |
| size_t const rec_hdr_cid_offset = rec_hdr_ctr_offset + | |
| rec_hdr_ctr_len; | |
| size_t rec_hdr_cid_len = 0; | |
| #endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ | |
| #endif /* MBEDTLS_SSL_PROTO_DTLS */ | |
| size_t rec_hdr_len_offset; /* To be determined */ | |
| size_t const rec_hdr_len_len = 2; | |
| /* | |
| * Check minimum lengths for record header. | |
| */ | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| if (ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM) { | |
| rec_hdr_len_offset = rec_hdr_ctr_offset + rec_hdr_ctr_len; | |
| } else | |
| #endif /* MBEDTLS_SSL_PROTO_DTLS */ | |
| { | |
| rec_hdr_len_offset = rec_hdr_version_offset + rec_hdr_version_len; | |
| } | |
| if (len < rec_hdr_len_offset + rec_hdr_len_len) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, | |
| ( | |
| "datagram of length %u too small to hold DTLS record header of length %u", | |
| (unsigned) len, | |
| (unsigned) (rec_hdr_len_len + rec_hdr_len_len))); | |
| return MBEDTLS_ERR_SSL_INVALID_RECORD; | |
| } | |
| /* | |
| * Parse and validate record content type | |
| */ | |
| rec->type = buf[rec_hdr_type_offset]; | |
| /* Check record content type */ | |
| #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) | |
| rec->cid_len = 0; | |
| if (ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM && | |
| ssl->conf->cid_len != 0 && | |
| rec->type == MBEDTLS_SSL_MSG_CID) { | |
| /* Shift pointers to account for record header including CID | |
| * struct { | |
| * ContentType outer_type = tls12_cid; | |
| * ProtocolVersion version; | |
| * uint16 epoch; | |
| * uint48 sequence_number; | |
| * opaque cid[cid_length]; // Additional field compared to | |
| * // default DTLS record format | |
| * uint16 length; | |
| * opaque enc_content[DTLSCiphertext.length]; | |
| * } DTLSCiphertext; | |
| */ | |
| /* So far, we only support static CID lengths | |
| * fixed in the configuration. */ | |
| rec_hdr_cid_len = ssl->conf->cid_len; | |
| rec_hdr_len_offset += rec_hdr_cid_len; | |
| if (len < rec_hdr_len_offset + rec_hdr_len_len) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, | |
| ( | |
| "datagram of length %u too small to hold DTLS record header including CID, length %u", | |
| (unsigned) len, | |
| (unsigned) (rec_hdr_len_offset + rec_hdr_len_len))); | |
| return MBEDTLS_ERR_SSL_INVALID_RECORD; | |
| } | |
| /* configured CID len is guaranteed at most 255, see | |
| * MBEDTLS_SSL_CID_OUT_LEN_MAX in check_config.h */ | |
| rec->cid_len = (uint8_t) rec_hdr_cid_len; | |
| memcpy(rec->cid, buf + rec_hdr_cid_offset, rec_hdr_cid_len); | |
| } else | |
| #endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ | |
| { | |
| if (ssl_check_record_type(rec->type)) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("unknown record type %u", | |
| (unsigned) rec->type)); | |
| return MBEDTLS_ERR_SSL_INVALID_RECORD; | |
| } | |
| } | |
| /* | |
| * Parse and validate record version | |
| */ | |
| rec->ver[0] = buf[rec_hdr_version_offset + 0]; | |
| rec->ver[1] = buf[rec_hdr_version_offset + 1]; | |
| tls_version = (mbedtls_ssl_protocol_version) mbedtls_ssl_read_version( | |
| buf + rec_hdr_version_offset, | |
| ssl->conf->transport); | |
| if (tls_version > ssl->conf->max_tls_version) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("TLS version mismatch: got %u, expected max %u", | |
| (unsigned) tls_version, | |
| (unsigned) ssl->conf->max_tls_version)); | |
| return MBEDTLS_ERR_SSL_INVALID_RECORD; | |
| } | |
| /* | |
| * Parse/Copy record sequence number. | |
| */ | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| if (ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM) { | |
| /* Copy explicit record sequence number from input buffer. */ | |
| memcpy(&rec->ctr[0], buf + rec_hdr_ctr_offset, | |
| rec_hdr_ctr_len); | |
| } else | |
| #endif /* MBEDTLS_SSL_PROTO_DTLS */ | |
| { | |
| /* Copy implicit record sequence number from SSL context structure. */ | |
| memcpy(&rec->ctr[0], ssl->in_ctr, rec_hdr_ctr_len); | |
| } | |
| /* | |
| * Parse record length. | |
| */ | |
| rec->data_offset = rec_hdr_len_offset + rec_hdr_len_len; | |
| rec->data_len = ((size_t) buf[rec_hdr_len_offset + 0] << 8) | | |
| ((size_t) buf[rec_hdr_len_offset + 1] << 0); | |
| MBEDTLS_SSL_DEBUG_BUF(4, "input record header", buf, rec->data_offset); | |
| MBEDTLS_SSL_DEBUG_MSG(3, ("input record: msgtype = %u, " | |
| "version = [0x%x], msglen = %" MBEDTLS_PRINTF_SIZET, | |
| rec->type, (unsigned) tls_version, rec->data_len)); | |
| rec->buf = buf; | |
| rec->buf_len = rec->data_offset + rec->data_len; | |
| if (rec->data_len == 0) { | |
| return MBEDTLS_ERR_SSL_INVALID_RECORD; | |
| } | |
| /* | |
| * DTLS-related tests. | |
| * Check epoch before checking length constraint because | |
| * the latter varies with the epoch. E.g., if a ChangeCipherSpec | |
| * message gets duplicated before the corresponding Finished message, | |
| * the second ChangeCipherSpec should be discarded because it belongs | |
| * to an old epoch, but not because its length is shorter than | |
| * the minimum record length for packets using the new record transform. | |
| * Note that these two kinds of failures are handled differently, | |
| * as an unexpected record is silently skipped but an invalid | |
| * record leads to the entire datagram being dropped. | |
| */ | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| if (ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM) { | |
| rec_epoch = (rec->ctr[0] << 8) | rec->ctr[1]; | |
| /* Check that the datagram is large enough to contain a record | |
| * of the advertised length. */ | |
| if (len < rec->data_offset + rec->data_len) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, | |
| ( | |
| "Datagram of length %u too small to contain record of advertised length %u.", | |
| (unsigned) len, | |
| (unsigned) (rec->data_offset + rec->data_len))); | |
| return MBEDTLS_ERR_SSL_INVALID_RECORD; | |
| } | |
| /* Records from other, non-matching epochs are silently discarded. | |
| * (The case of same-port Client reconnects must be considered in | |
| * the caller). */ | |
| if (rec_epoch != ssl->in_epoch) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("record from another epoch: " | |
| "expected %u, received %lu", | |
| ssl->in_epoch, (unsigned long) rec_epoch)); | |
| /* Records from the next epoch are considered for buffering | |
| * (concretely: early Finished messages). */ | |
| if (rec_epoch == (unsigned) ssl->in_epoch + 1) { | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("Consider record for buffering")); | |
| return MBEDTLS_ERR_SSL_EARLY_MESSAGE; | |
| } | |
| return MBEDTLS_ERR_SSL_UNEXPECTED_RECORD; | |
| } | |
| #if defined(MBEDTLS_SSL_DTLS_ANTI_REPLAY) | |
| /* For records from the correct epoch, check whether their | |
| * sequence number has been seen before. */ | |
| else if (mbedtls_ssl_dtls_record_replay_check((mbedtls_ssl_context *) ssl, | |
| &rec->ctr[0]) != 0) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("replayed record")); | |
| return MBEDTLS_ERR_SSL_UNEXPECTED_RECORD; | |
| } | |
| #endif | |
| } | |
| #endif /* MBEDTLS_SSL_PROTO_DTLS */ | |
| return 0; | |
| } | |
| #if defined(MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE) && defined(MBEDTLS_SSL_SRV_C) | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_check_client_reconnect(mbedtls_ssl_context *ssl) | |
| { | |
| unsigned int rec_epoch = (ssl->in_ctr[0] << 8) | ssl->in_ctr[1]; | |
| /* | |
| * Check for an epoch 0 ClientHello. We can't use in_msg here to | |
| * access the first byte of record content (handshake type), as we | |
| * have an active transform (possibly iv_len != 0), so use the | |
| * fact that the record header len is 13 instead. | |
| */ | |
| if (rec_epoch == 0 && | |
| ssl->conf->endpoint == MBEDTLS_SSL_IS_SERVER && | |
| mbedtls_ssl_is_handshake_over(ssl) == 1 && | |
| ssl->in_msgtype == MBEDTLS_SSL_MSG_HANDSHAKE && | |
| ssl->in_left > 13 && | |
| ssl->in_buf[13] == MBEDTLS_SSL_HS_CLIENT_HELLO) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("possible client reconnect " | |
| "from the same port")); | |
| return ssl_handle_possible_reconnect(ssl); | |
| } | |
| return 0; | |
| } | |
| #endif /* MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE && MBEDTLS_SSL_SRV_C */ | |
| /* | |
| * If applicable, decrypt record content | |
| */ | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_prepare_record_content(mbedtls_ssl_context *ssl, | |
| mbedtls_record *rec) | |
| { | |
| int ret, done = 0; | |
| MBEDTLS_SSL_DEBUG_BUF(4, "input record from network", | |
| rec->buf, rec->buf_len); | |
| /* | |
| * In TLS 1.3, always treat ChangeCipherSpec records | |
| * as unencrypted. The only thing we do with them is | |
| * check the length and content and ignore them. | |
| */ | |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_3) | |
| if (ssl->transform_in != NULL && | |
| ssl->transform_in->tls_version == MBEDTLS_SSL_VERSION_TLS1_3) { | |
| if (rec->type == MBEDTLS_SSL_MSG_CHANGE_CIPHER_SPEC) { | |
| done = 1; | |
| } | |
| } | |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_3 */ | |
| if (!done && ssl->transform_in != NULL) { | |
| unsigned char const old_msg_type = rec->type; | |
| if ((ret = mbedtls_ssl_decrypt_buf(ssl, ssl->transform_in, | |
| rec)) != 0) { | |
| MBEDTLS_SSL_DEBUG_RET(1, "ssl_decrypt_buf", ret); | |
| #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) | |
| if (ret == MBEDTLS_ERR_SSL_UNEXPECTED_CID && | |
| ssl->conf->ignore_unexpected_cid | |
| == MBEDTLS_SSL_UNEXPECTED_CID_IGNORE) { | |
| MBEDTLS_SSL_DEBUG_MSG(3, ("ignoring unexpected CID")); | |
| ret = MBEDTLS_ERR_SSL_CONTINUE_PROCESSING; | |
| } | |
| #endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ | |
| return ret; | |
| } | |
| if (old_msg_type != rec->type) { | |
| MBEDTLS_SSL_DEBUG_MSG(4, ("record type after decrypt (before %d): %d", | |
| old_msg_type, rec->type)); | |
| } | |
| MBEDTLS_SSL_DEBUG_BUF(4, "input payload after decrypt", | |
| rec->buf + rec->data_offset, rec->data_len); | |
| #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) | |
| /* We have already checked the record content type | |
| * in ssl_parse_record_header(), failing or silently | |
| * dropping the record in the case of an unknown type. | |
| * | |
| * Since with the use of CIDs, the record content type | |
| * might change during decryption, re-check the record | |
| * content type, but treat a failure as fatal this time. */ | |
| if (ssl_check_record_type(rec->type)) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("unknown record type")); | |
| return MBEDTLS_ERR_SSL_INVALID_RECORD; | |
| } | |
| #endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ | |
| if (rec->data_len == 0) { | |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_2) | |
| if (ssl->tls_version == MBEDTLS_SSL_VERSION_TLS1_2 | |
| && rec->type != MBEDTLS_SSL_MSG_APPLICATION_DATA) { | |
| /* TLS v1.2 explicitly disallows zero-length messages which are not application data */ | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("invalid zero-length message type: %d", ssl->in_msgtype)); | |
| return MBEDTLS_ERR_SSL_INVALID_RECORD; | |
| } | |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_2 */ | |
| ssl->nb_zero++; | |
| /* | |
| * Three or more empty messages may be a DoS attack | |
| * (excessive CPU consumption). | |
| */ | |
| if (ssl->nb_zero > 3) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("received four consecutive empty " | |
| "messages, possible DoS attack")); | |
| /* Treat the records as if they were not properly authenticated, | |
| * thereby failing the connection if we see more than allowed | |
| * by the configured bad MAC threshold. */ | |
| return MBEDTLS_ERR_SSL_INVALID_MAC; | |
| } | |
| } else { | |
| ssl->nb_zero = 0; | |
| } | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| if (ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM) { | |
| ; /* in_ctr read from peer, not maintained internally */ | |
| } else | |
| #endif | |
| { | |
| unsigned i; | |
| for (i = MBEDTLS_SSL_SEQUENCE_NUMBER_LEN; | |
| i > mbedtls_ssl_ep_len(ssl); i--) { | |
| if (++ssl->in_ctr[i - 1] != 0) { | |
| break; | |
| } | |
| } | |
| /* The loop goes to its end iff the counter is wrapping */ | |
| if (i == mbedtls_ssl_ep_len(ssl)) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("incoming message counter would wrap")); | |
| return MBEDTLS_ERR_SSL_COUNTER_WRAPPING; | |
| } | |
| } | |
| } | |
| #if defined(MBEDTLS_SSL_DTLS_ANTI_REPLAY) | |
| if (ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM) { | |
| mbedtls_ssl_dtls_replay_update(ssl); | |
| } | |
| #endif | |
| /* Check actual (decrypted) record content length against | |
| * configured maximum. */ | |
| if (rec->data_len > MBEDTLS_SSL_IN_CONTENT_LEN) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("bad message length")); | |
| return MBEDTLS_ERR_SSL_INVALID_RECORD; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Read a record. | |
| * | |
| * Silently ignore non-fatal alert (and for DTLS, invalid records as well, | |
| * RFC 6347 4.1.2.7) and continue reading until a valid record is found. | |
| * | |
| */ | |
| /* Helper functions for mbedtls_ssl_read_record(). */ | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_consume_current_message(mbedtls_ssl_context *ssl); | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_get_next_record(mbedtls_ssl_context *ssl); | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_record_is_in_progress(mbedtls_ssl_context *ssl); | |
| int mbedtls_ssl_read_record(mbedtls_ssl_context *ssl, | |
| unsigned update_hs_digest) | |
| { | |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("=> read record")); | |
| if (ssl->keep_current_message == 0) { | |
| do { | |
| ret = ssl_consume_current_message(ssl); | |
| if (ret != 0) { | |
| return ret; | |
| } | |
| if (ssl_record_is_in_progress(ssl) == 0) { | |
| int dtls_have_buffered = 0; | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| /* We only check for buffered messages if the | |
| * current datagram is fully consumed. */ | |
| if (ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM && | |
| ssl_next_record_is_in_datagram(ssl) == 0) { | |
| if (ssl_load_buffered_message(ssl) == 0) { | |
| dtls_have_buffered = 1; | |
| } | |
| } | |
| #endif /* MBEDTLS_SSL_PROTO_DTLS */ | |
| if (dtls_have_buffered == 0) { | |
| ret = ssl_get_next_record(ssl); | |
| if (ret == MBEDTLS_ERR_SSL_CONTINUE_PROCESSING) { | |
| continue; | |
| } | |
| if (ret != 0) { | |
| MBEDTLS_SSL_DEBUG_RET(1, ("ssl_get_next_record"), ret); | |
| return ret; | |
| } | |
| } | |
| } | |
| ret = mbedtls_ssl_handle_message_type(ssl); | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| if (ret == MBEDTLS_ERR_SSL_EARLY_MESSAGE) { | |
| /* Buffer future message */ | |
| ret = ssl_buffer_message(ssl); | |
| if (ret != 0) { | |
| return ret; | |
| } | |
| ret = MBEDTLS_ERR_SSL_CONTINUE_PROCESSING; | |
| } | |
| #endif /* MBEDTLS_SSL_PROTO_DTLS */ | |
| } while (MBEDTLS_ERR_SSL_NON_FATAL == ret || | |
| MBEDTLS_ERR_SSL_CONTINUE_PROCESSING == ret); | |
| if (0 != ret) { | |
| MBEDTLS_SSL_DEBUG_RET(1, ("mbedtls_ssl_handle_message_type"), ret); | |
| return ret; | |
| } | |
| if (ssl->in_msgtype == MBEDTLS_SSL_MSG_HANDSHAKE && | |
| update_hs_digest == 1) { | |
| ret = mbedtls_ssl_update_handshake_status(ssl); | |
| if (0 != ret) { | |
| MBEDTLS_SSL_DEBUG_RET(1, ("mbedtls_ssl_update_handshake_status"), ret); | |
| return ret; | |
| } | |
| } | |
| } else { | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("reuse previously read message")); | |
| ssl->keep_current_message = 0; | |
| } | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("<= read record")); | |
| return 0; | |
| } | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_next_record_is_in_datagram(mbedtls_ssl_context *ssl) | |
| { | |
| if (ssl->in_left > ssl->next_record_offset) { | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_load_buffered_message(mbedtls_ssl_context *ssl) | |
| { | |
| mbedtls_ssl_handshake_params * const hs = ssl->handshake; | |
| mbedtls_ssl_hs_buffer *hs_buf; | |
| int ret = 0; | |
| if (hs == NULL) { | |
| return -1; | |
| } | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("=> ssl_load_buffered_message")); | |
| if (ssl->state == MBEDTLS_SSL_CLIENT_CHANGE_CIPHER_SPEC || | |
| ssl->state == MBEDTLS_SSL_SERVER_CHANGE_CIPHER_SPEC) { | |
| /* Check if we have seen a ChangeCipherSpec before. | |
| * If yes, synthesize a CCS record. */ | |
| if (!hs->buffering.seen_ccs) { | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("CCS not seen in the current flight")); | |
| ret = -1; | |
| goto exit; | |
| } | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("Injecting buffered CCS message")); | |
| ssl->in_msgtype = MBEDTLS_SSL_MSG_CHANGE_CIPHER_SPEC; | |
| ssl->in_msglen = 1; | |
| ssl->in_msg[0] = 1; | |
| /* As long as they are equal, the exact value doesn't matter. */ | |
| ssl->in_left = 0; | |
| ssl->next_record_offset = 0; | |
| hs->buffering.seen_ccs = 0; | |
| goto exit; | |
| } | |
| #if defined(MBEDTLS_DEBUG_C) | |
| /* Debug only */ | |
| { | |
| unsigned offset; | |
| for (offset = 1; offset < MBEDTLS_SSL_MAX_BUFFERED_HS; offset++) { | |
| hs_buf = &hs->buffering.hs[offset]; | |
| if (hs_buf->is_valid == 1) { | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("Future message with sequence number %u %s buffered.", | |
| hs->in_msg_seq + offset, | |
| hs_buf->is_complete ? "fully" : "partially")); | |
| } | |
| } | |
| } | |
| #endif /* MBEDTLS_DEBUG_C */ | |
| /* Check if we have buffered and/or fully reassembled the | |
| * next handshake message. */ | |
| hs_buf = &hs->buffering.hs[0]; | |
| if ((hs_buf->is_valid == 1) && (hs_buf->is_complete == 1)) { | |
| /* Synthesize a record containing the buffered HS message. */ | |
| size_t msg_len = (hs_buf->data[1] << 16) | | |
| (hs_buf->data[2] << 8) | | |
| hs_buf->data[3]; | |
| /* Double-check that we haven't accidentally buffered | |
| * a message that doesn't fit into the input buffer. */ | |
| if (msg_len + 12 > MBEDTLS_SSL_IN_CONTENT_LEN) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("should never happen")); | |
| return MBEDTLS_ERR_SSL_INTERNAL_ERROR; | |
| } | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("Next handshake message has been buffered - load")); | |
| MBEDTLS_SSL_DEBUG_BUF(3, "Buffered handshake message (incl. header)", | |
| hs_buf->data, msg_len + 12); | |
| ssl->in_msgtype = MBEDTLS_SSL_MSG_HANDSHAKE; | |
| ssl->in_hslen = msg_len + 12; | |
| ssl->in_msglen = msg_len + 12; | |
| memcpy(ssl->in_msg, hs_buf->data, ssl->in_hslen); | |
| ret = 0; | |
| goto exit; | |
| } else { | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("Next handshake message %u not or only partially bufffered", | |
| hs->in_msg_seq)); | |
| } | |
| ret = -1; | |
| exit: | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("<= ssl_load_buffered_message")); | |
| return ret; | |
| } | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_buffer_make_space(mbedtls_ssl_context *ssl, | |
| size_t desired) | |
| { | |
| int offset; | |
| mbedtls_ssl_handshake_params * const hs = ssl->handshake; | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("Attempt to free buffered messages to have %u bytes available", | |
| (unsigned) desired)); | |
| /* Get rid of future records epoch first, if such exist. */ | |
| ssl_free_buffered_record(ssl); | |
| /* Check if we have enough space available now. */ | |
| if (desired <= (MBEDTLS_SSL_DTLS_MAX_BUFFERING - | |
| hs->buffering.total_bytes_buffered)) { | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("Enough space available after freeing future epoch record")); | |
| return 0; | |
| } | |
| /* We don't have enough space to buffer the next expected handshake | |
| * message. Remove buffers used for future messages to gain space, | |
| * starting with the most distant one. */ | |
| for (offset = MBEDTLS_SSL_MAX_BUFFERED_HS - 1; | |
| offset >= 0; offset--) { | |
| MBEDTLS_SSL_DEBUG_MSG(2, | |
| ( | |
| "Free buffering slot %d to make space for reassembly of next handshake message", | |
| offset)); | |
| ssl_buffering_free_slot(ssl, (uint8_t) offset); | |
| /* Check if we have enough space available now. */ | |
| if (desired <= (MBEDTLS_SSL_DTLS_MAX_BUFFERING - | |
| hs->buffering.total_bytes_buffered)) { | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("Enough space available after freeing buffered HS messages")); | |
| return 0; | |
| } | |
| } | |
| return -1; | |
| } | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_buffer_message(mbedtls_ssl_context *ssl) | |
| { | |
| int ret = 0; | |
| mbedtls_ssl_handshake_params * const hs = ssl->handshake; | |
| if (hs == NULL) { | |
| return 0; | |
| } | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("=> ssl_buffer_message")); | |
| switch (ssl->in_msgtype) { | |
| case MBEDTLS_SSL_MSG_CHANGE_CIPHER_SPEC: | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("Remember CCS message")); | |
| hs->buffering.seen_ccs = 1; | |
| break; | |
| case MBEDTLS_SSL_MSG_HANDSHAKE: | |
| { | |
| unsigned recv_msg_seq_offset; | |
| unsigned recv_msg_seq = (ssl->in_msg[4] << 8) | ssl->in_msg[5]; | |
| mbedtls_ssl_hs_buffer *hs_buf; | |
| size_t msg_len = ssl->in_hslen - 12; | |
| /* We should never receive an old handshake | |
| * message - double-check nonetheless. */ | |
| if (recv_msg_seq < ssl->handshake->in_msg_seq) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("should never happen")); | |
| return MBEDTLS_ERR_SSL_INTERNAL_ERROR; | |
| } | |
| recv_msg_seq_offset = recv_msg_seq - ssl->handshake->in_msg_seq; | |
| if (recv_msg_seq_offset >= MBEDTLS_SSL_MAX_BUFFERED_HS) { | |
| /* Silently ignore -- message too far in the future */ | |
| MBEDTLS_SSL_DEBUG_MSG(2, | |
| ("Ignore future HS message with sequence number %u, " | |
| "buffering window %u - %u", | |
| recv_msg_seq, ssl->handshake->in_msg_seq, | |
| ssl->handshake->in_msg_seq + MBEDTLS_SSL_MAX_BUFFERED_HS - | |
| 1)); | |
| goto exit; | |
| } | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("Buffering HS message with sequence number %u, offset %u ", | |
| recv_msg_seq, recv_msg_seq_offset)); | |
| hs_buf = &hs->buffering.hs[recv_msg_seq_offset]; | |
| /* Check if the buffering for this seq nr has already commenced. */ | |
| if (!hs_buf->is_valid) { | |
| size_t reassembly_buf_sz; | |
| hs_buf->is_fragmented = | |
| (ssl_hs_is_proper_fragment(ssl) == 1); | |
| /* We copy the message back into the input buffer | |
| * after reassembly, so check that it's not too large. | |
| * This is an implementation-specific limitation | |
| * and not one from the standard, hence it is not | |
| * checked in ssl_check_hs_header(). */ | |
| if (msg_len + 12 > MBEDTLS_SSL_IN_CONTENT_LEN) { | |
| /* Ignore message */ | |
| goto exit; | |
| } | |
| /* Check if we have enough space to buffer the message. */ | |
| if (hs->buffering.total_bytes_buffered > | |
| MBEDTLS_SSL_DTLS_MAX_BUFFERING) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("should never happen")); | |
| return MBEDTLS_ERR_SSL_INTERNAL_ERROR; | |
| } | |
| reassembly_buf_sz = ssl_get_reassembly_buffer_size(msg_len, | |
| hs_buf->is_fragmented); | |
| if (reassembly_buf_sz > (MBEDTLS_SSL_DTLS_MAX_BUFFERING - | |
| hs->buffering.total_bytes_buffered)) { | |
| if (recv_msg_seq_offset > 0) { | |
| /* If we can't buffer a future message because | |
| * of space limitations -- ignore. */ | |
| MBEDTLS_SSL_DEBUG_MSG(2, | |
| ("Buffering of future message of size %" | |
| MBEDTLS_PRINTF_SIZET | |
| " would exceed the compile-time limit %" | |
| MBEDTLS_PRINTF_SIZET | |
| " (already %" MBEDTLS_PRINTF_SIZET | |
| " bytes buffered) -- ignore\n", | |
| msg_len, (size_t) MBEDTLS_SSL_DTLS_MAX_BUFFERING, | |
| hs->buffering.total_bytes_buffered)); | |
| goto exit; | |
| } else { | |
| MBEDTLS_SSL_DEBUG_MSG(2, | |
| ("Buffering of future message of size %" | |
| MBEDTLS_PRINTF_SIZET | |
| " would exceed the compile-time limit %" | |
| MBEDTLS_PRINTF_SIZET | |
| " (already %" MBEDTLS_PRINTF_SIZET | |
| " bytes buffered) -- attempt to make space by freeing buffered future messages\n", | |
| msg_len, (size_t) MBEDTLS_SSL_DTLS_MAX_BUFFERING, | |
| hs->buffering.total_bytes_buffered)); | |
| } | |
| if (ssl_buffer_make_space(ssl, reassembly_buf_sz) != 0) { | |
| MBEDTLS_SSL_DEBUG_MSG(2, | |
| ("Reassembly of next message of size %" | |
| MBEDTLS_PRINTF_SIZET | |
| " (%" MBEDTLS_PRINTF_SIZET | |
| " with bitmap) would exceed" | |
| " the compile-time limit %" | |
| MBEDTLS_PRINTF_SIZET | |
| " (already %" MBEDTLS_PRINTF_SIZET | |
| " bytes buffered) -- fail\n", | |
| msg_len, | |
| reassembly_buf_sz, | |
| (size_t) MBEDTLS_SSL_DTLS_MAX_BUFFERING, | |
| hs->buffering.total_bytes_buffered)); | |
| ret = MBEDTLS_ERR_SSL_BUFFER_TOO_SMALL; | |
| goto exit; | |
| } | |
| } | |
| MBEDTLS_SSL_DEBUG_MSG(2, | |
| ("initialize reassembly, total length = %" | |
| MBEDTLS_PRINTF_SIZET, | |
| msg_len)); | |
| hs_buf->data = mbedtls_calloc(1, reassembly_buf_sz); | |
| if (hs_buf->data == NULL) { | |
| ret = MBEDTLS_ERR_SSL_ALLOC_FAILED; | |
| goto exit; | |
| } | |
| hs_buf->data_len = reassembly_buf_sz; | |
| /* Prepare final header: copy msg_type, length and message_seq, | |
| * then add standardised fragment_offset and fragment_length */ | |
| memcpy(hs_buf->data, ssl->in_msg, 6); | |
| memset(hs_buf->data + 6, 0, 3); | |
| memcpy(hs_buf->data + 9, hs_buf->data + 1, 3); | |
| hs_buf->is_valid = 1; | |
| hs->buffering.total_bytes_buffered += reassembly_buf_sz; | |
| } else { | |
| /* Make sure msg_type and length are consistent */ | |
| if (memcmp(hs_buf->data, ssl->in_msg, 4) != 0) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("Fragment header mismatch - ignore")); | |
| /* Ignore */ | |
| goto exit; | |
| } | |
| } | |
| if (!hs_buf->is_complete) { | |
| size_t frag_len, frag_off; | |
| unsigned char * const msg = hs_buf->data + 12; | |
| /* | |
| * Check and copy current fragment | |
| */ | |
| /* Validation of header fields already done in | |
| * mbedtls_ssl_prepare_handshake_record(). */ | |
| frag_off = ssl_get_hs_frag_off(ssl); | |
| frag_len = ssl_get_hs_frag_len(ssl); | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("adding fragment, offset = %" MBEDTLS_PRINTF_SIZET | |
| ", length = %" MBEDTLS_PRINTF_SIZET, | |
| frag_off, frag_len)); | |
| memcpy(msg + frag_off, ssl->in_msg + 12, frag_len); | |
| if (hs_buf->is_fragmented) { | |
| unsigned char * const bitmask = msg + msg_len; | |
| ssl_bitmask_set(bitmask, frag_off, frag_len); | |
| hs_buf->is_complete = (ssl_bitmask_check(bitmask, | |
| msg_len) == 0); | |
| } else { | |
| hs_buf->is_complete = 1; | |
| } | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("message %scomplete", | |
| hs_buf->is_complete ? "" : "not yet ")); | |
| } | |
| break; | |
| } | |
| default: | |
| /* We don't buffer other types of messages. */ | |
| break; | |
| } | |
| exit: | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("<= ssl_buffer_message")); | |
| return ret; | |
| } | |
| #endif /* MBEDTLS_SSL_PROTO_DTLS */ | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_consume_current_message(mbedtls_ssl_context *ssl) | |
| { | |
| /* | |
| * Consume last content-layer message and potentially | |
| * update in_msglen which keeps track of the contents' | |
| * consumption state. | |
| * | |
| * (1) Handshake messages: | |
| * Remove last handshake message, move content | |
| * and adapt in_msglen. | |
| * | |
| * (2) Alert messages: | |
| * Consume whole record content, in_msglen = 0. | |
| * | |
| * (3) Change cipher spec: | |
| * Consume whole record content, in_msglen = 0. | |
| * | |
| * (4) Application data: | |
| * Don't do anything - the record layer provides | |
| * the application data as a stream transport | |
| * and consumes through mbedtls_ssl_read only. | |
| * | |
| */ | |
| /* Case (1): Handshake messages */ | |
| if (ssl->in_hslen != 0) { | |
| /* Hard assertion to be sure that no application data | |
| * is in flight, as corrupting ssl->in_msglen during | |
| * ssl->in_offt != NULL is fatal. */ | |
| if (ssl->in_offt != NULL) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("should never happen")); | |
| return MBEDTLS_ERR_SSL_INTERNAL_ERROR; | |
| } | |
| /* | |
| * Get next Handshake message in the current record | |
| */ | |
| /* Notes: | |
| * (1) in_hslen is not necessarily the size of the | |
| * current handshake content: If DTLS handshake | |
| * fragmentation is used, that's the fragment | |
| * size instead. Using the total handshake message | |
| * size here is faulty and should be changed at | |
| * some point. | |
| * (2) While it doesn't seem to cause problems, one | |
| * has to be very careful not to assume that in_hslen | |
| * is always <= in_msglen in a sensible communication. | |
| * Again, it's wrong for DTLS handshake fragmentation. | |
| * The following check is therefore mandatory, and | |
| * should not be treated as a silently corrected assertion. | |
| * Additionally, ssl->in_hslen might be arbitrarily out of | |
| * bounds after handling a DTLS message with an unexpected | |
| * sequence number, see mbedtls_ssl_prepare_handshake_record. | |
| */ | |
| if (ssl->in_hslen < ssl->in_msglen) { | |
| ssl->in_msglen -= ssl->in_hslen; | |
| memmove(ssl->in_msg, ssl->in_msg + ssl->in_hslen, | |
| ssl->in_msglen); | |
| MBEDTLS_SSL_DEBUG_BUF(4, "remaining content in record", | |
| ssl->in_msg, ssl->in_msglen); | |
| } else { | |
| ssl->in_msglen = 0; | |
| } | |
| ssl->in_hslen = 0; | |
| } | |
| /* Case (4): Application data */ | |
| else if (ssl->in_offt != NULL) { | |
| return 0; | |
| } | |
| /* Everything else (CCS & Alerts) */ | |
| else { | |
| ssl->in_msglen = 0; | |
| } | |
| return 0; | |
| } | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_record_is_in_progress(mbedtls_ssl_context *ssl) | |
| { | |
| if (ssl->in_msglen > 0) { | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| static void ssl_free_buffered_record(mbedtls_ssl_context *ssl) | |
| { | |
| mbedtls_ssl_handshake_params * const hs = ssl->handshake; | |
| if (hs == NULL) { | |
| return; | |
| } | |
| if (hs->buffering.future_record.data != NULL) { | |
| hs->buffering.total_bytes_buffered -= | |
| hs->buffering.future_record.len; | |
| mbedtls_free(hs->buffering.future_record.data); | |
| hs->buffering.future_record.data = NULL; | |
| } | |
| } | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_load_buffered_record(mbedtls_ssl_context *ssl) | |
| { | |
| mbedtls_ssl_handshake_params * const hs = ssl->handshake; | |
| unsigned char *rec; | |
| size_t rec_len; | |
| unsigned rec_epoch; | |
| #if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH) | |
| size_t in_buf_len = ssl->in_buf_len; | |
| #else | |
| size_t in_buf_len = MBEDTLS_SSL_IN_BUFFER_LEN; | |
| #endif | |
| if (ssl->conf->transport != MBEDTLS_SSL_TRANSPORT_DATAGRAM) { | |
| return 0; | |
| } | |
| if (hs == NULL) { | |
| return 0; | |
| } | |
| rec = hs->buffering.future_record.data; | |
| rec_len = hs->buffering.future_record.len; | |
| rec_epoch = hs->buffering.future_record.epoch; | |
| if (rec == NULL) { | |
| return 0; | |
| } | |
| /* Only consider loading future records if the | |
| * input buffer is empty. */ | |
| if (ssl_next_record_is_in_datagram(ssl) == 1) { | |
| return 0; | |
| } | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("=> ssl_load_buffered_record")); | |
| if (rec_epoch != ssl->in_epoch) { | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("Buffered record not from current epoch.")); | |
| goto exit; | |
| } | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("Found buffered record from current epoch - load")); | |
| /* Double-check that the record is not too large */ | |
| if (rec_len > in_buf_len - (size_t) (ssl->in_hdr - ssl->in_buf)) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("should never happen")); | |
| return MBEDTLS_ERR_SSL_INTERNAL_ERROR; | |
| } | |
| memcpy(ssl->in_hdr, rec, rec_len); | |
| ssl->in_left = rec_len; | |
| ssl->next_record_offset = 0; | |
| ssl_free_buffered_record(ssl); | |
| exit: | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("<= ssl_load_buffered_record")); | |
| return 0; | |
| } | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_buffer_future_record(mbedtls_ssl_context *ssl, | |
| mbedtls_record const *rec) | |
| { | |
| mbedtls_ssl_handshake_params * const hs = ssl->handshake; | |
| /* Don't buffer future records outside handshakes. */ | |
| if (hs == NULL) { | |
| return 0; | |
| } | |
| /* Only buffer handshake records (we are only interested | |
| * in Finished messages). */ | |
| if (rec->type != MBEDTLS_SSL_MSG_HANDSHAKE) { | |
| return 0; | |
| } | |
| /* Don't buffer more than one future epoch record. */ | |
| if (hs->buffering.future_record.data != NULL) { | |
| return 0; | |
| } | |
| /* Don't buffer record if there's not enough buffering space remaining. */ | |
| if (rec->buf_len > (MBEDTLS_SSL_DTLS_MAX_BUFFERING - | |
| hs->buffering.total_bytes_buffered)) { | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("Buffering of future epoch record of size %" MBEDTLS_PRINTF_SIZET | |
| " would exceed the compile-time limit %" MBEDTLS_PRINTF_SIZET | |
| " (already %" MBEDTLS_PRINTF_SIZET | |
| " bytes buffered) -- ignore\n", | |
| rec->buf_len, (size_t) MBEDTLS_SSL_DTLS_MAX_BUFFERING, | |
| hs->buffering.total_bytes_buffered)); | |
| return 0; | |
| } | |
| /* Buffer record */ | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("Buffer record from epoch %u", | |
| ssl->in_epoch + 1U)); | |
| MBEDTLS_SSL_DEBUG_BUF(3, "Buffered record", rec->buf, rec->buf_len); | |
| /* ssl_parse_record_header() only considers records | |
| * of the next epoch as candidates for buffering. */ | |
| hs->buffering.future_record.epoch = ssl->in_epoch + 1; | |
| hs->buffering.future_record.len = rec->buf_len; | |
| hs->buffering.future_record.data = | |
| mbedtls_calloc(1, hs->buffering.future_record.len); | |
| if (hs->buffering.future_record.data == NULL) { | |
| /* If we run out of RAM trying to buffer a | |
| * record from the next epoch, just ignore. */ | |
| return 0; | |
| } | |
| memcpy(hs->buffering.future_record.data, rec->buf, rec->buf_len); | |
| hs->buffering.total_bytes_buffered += rec->buf_len; | |
| return 0; | |
| } | |
| #endif /* MBEDTLS_SSL_PROTO_DTLS */ | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_get_next_record(mbedtls_ssl_context *ssl) | |
| { | |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; | |
| mbedtls_record rec; | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| /* We might have buffered a future record; if so, | |
| * and if the epoch matches now, load it. | |
| * On success, this call will set ssl->in_left to | |
| * the length of the buffered record, so that | |
| * the calls to ssl_fetch_input() below will | |
| * essentially be no-ops. */ | |
| ret = ssl_load_buffered_record(ssl); | |
| if (ret != 0) { | |
| return ret; | |
| } | |
| #endif /* MBEDTLS_SSL_PROTO_DTLS */ | |
| /* Ensure that we have enough space available for the default form | |
| * of TLS / DTLS record headers (5 Bytes for TLS, 13 Bytes for DTLS, | |
| * with no space for CIDs counted in). */ | |
| ret = mbedtls_ssl_fetch_input(ssl, mbedtls_ssl_in_hdr_len(ssl)); | |
| if (ret != 0) { | |
| MBEDTLS_SSL_DEBUG_RET(1, "mbedtls_ssl_fetch_input", ret); | |
| return ret; | |
| } | |
| ret = ssl_parse_record_header(ssl, ssl->in_hdr, ssl->in_left, &rec); | |
| if (ret != 0) { | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| if (ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM) { | |
| if (ret == MBEDTLS_ERR_SSL_EARLY_MESSAGE) { | |
| ret = ssl_buffer_future_record(ssl, &rec); | |
| if (ret != 0) { | |
| return ret; | |
| } | |
| /* Fall through to handling of unexpected records */ | |
| ret = MBEDTLS_ERR_SSL_UNEXPECTED_RECORD; | |
| } | |
| if (ret == MBEDTLS_ERR_SSL_UNEXPECTED_RECORD) { | |
| #if defined(MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE) && defined(MBEDTLS_SSL_SRV_C) | |
| /* Reset in pointers to default state for TLS/DTLS records, | |
| * assuming no CID and no offset between record content and | |
| * record plaintext. */ | |
| mbedtls_ssl_update_in_pointers(ssl); | |
| /* Setup internal message pointers from record structure. */ | |
| ssl->in_msgtype = rec.type; | |
| #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) | |
| ssl->in_len = ssl->in_cid + rec.cid_len; | |
| #endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ | |
| ssl->in_iv = ssl->in_msg = ssl->in_len + 2; | |
| ssl->in_msglen = rec.data_len; | |
| ret = ssl_check_client_reconnect(ssl); | |
| MBEDTLS_SSL_DEBUG_RET(2, "ssl_check_client_reconnect", ret); | |
| if (ret != 0) { | |
| return ret; | |
| } | |
| #endif | |
| /* Skip unexpected record (but not whole datagram) */ | |
| ssl->next_record_offset = rec.buf_len; | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("discarding unexpected record " | |
| "(header)")); | |
| } else { | |
| /* Skip invalid record and the rest of the datagram */ | |
| ssl->next_record_offset = 0; | |
| ssl->in_left = 0; | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("discarding invalid record " | |
| "(header)")); | |
| } | |
| /* Get next record */ | |
| return MBEDTLS_ERR_SSL_CONTINUE_PROCESSING; | |
| } else | |
| #endif | |
| { | |
| return ret; | |
| } | |
| } | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| if (ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM) { | |
| /* Remember offset of next record within datagram. */ | |
| ssl->next_record_offset = rec.buf_len; | |
| if (ssl->next_record_offset < ssl->in_left) { | |
| MBEDTLS_SSL_DEBUG_MSG(3, ("more than one record within datagram")); | |
| } | |
| } else | |
| #endif | |
| { | |
| /* | |
| * Fetch record contents from underlying transport. | |
| */ | |
| ret = mbedtls_ssl_fetch_input(ssl, rec.buf_len); | |
| if (ret != 0) { | |
| MBEDTLS_SSL_DEBUG_RET(1, "mbedtls_ssl_fetch_input", ret); | |
| return ret; | |
| } | |
| ssl->in_left = 0; | |
| } | |
| /* | |
| * Decrypt record contents. | |
| */ | |
| if ((ret = ssl_prepare_record_content(ssl, &rec)) != 0) { | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| if (ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM) { | |
| /* Silently discard invalid records */ | |
| if (ret == MBEDTLS_ERR_SSL_INVALID_MAC) { | |
| /* Except when waiting for Finished as a bad mac here | |
| * probably means something went wrong in the handshake | |
| * (eg wrong psk used, mitm downgrade attempt, etc.) */ | |
| if (ssl->state == MBEDTLS_SSL_CLIENT_FINISHED || | |
| ssl->state == MBEDTLS_SSL_SERVER_FINISHED) { | |
| #if defined(MBEDTLS_SSL_ALL_ALERT_MESSAGES) | |
| if (ret == MBEDTLS_ERR_SSL_INVALID_MAC) { | |
| mbedtls_ssl_send_alert_message(ssl, | |
| MBEDTLS_SSL_ALERT_LEVEL_FATAL, | |
| MBEDTLS_SSL_ALERT_MSG_BAD_RECORD_MAC); | |
| } | |
| #endif | |
| return ret; | |
| } | |
| if (ssl->conf->badmac_limit != 0 && | |
| ++ssl->badmac_seen >= ssl->conf->badmac_limit) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("too many records with bad MAC")); | |
| return MBEDTLS_ERR_SSL_INVALID_MAC; | |
| } | |
| /* As above, invalid records cause | |
| * dismissal of the whole datagram. */ | |
| ssl->next_record_offset = 0; | |
| ssl->in_left = 0; | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("discarding invalid record (mac)")); | |
| return MBEDTLS_ERR_SSL_CONTINUE_PROCESSING; | |
| } | |
| return ret; | |
| } else | |
| #endif | |
| { | |
| /* Error out (and send alert) on invalid records */ | |
| #if defined(MBEDTLS_SSL_ALL_ALERT_MESSAGES) | |
| if (ret == MBEDTLS_ERR_SSL_INVALID_MAC) { | |
| mbedtls_ssl_send_alert_message(ssl, | |
| MBEDTLS_SSL_ALERT_LEVEL_FATAL, | |
| MBEDTLS_SSL_ALERT_MSG_BAD_RECORD_MAC); | |
| } | |
| #endif | |
| return ret; | |
| } | |
| } | |
| /* Reset in pointers to default state for TLS/DTLS records, | |
| * assuming no CID and no offset between record content and | |
| * record plaintext. */ | |
| mbedtls_ssl_update_in_pointers(ssl); | |
| #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) | |
| ssl->in_len = ssl->in_cid + rec.cid_len; | |
| #endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ | |
| ssl->in_iv = ssl->in_len + 2; | |
| /* The record content type may change during decryption, | |
| * so re-read it. */ | |
| ssl->in_msgtype = rec.type; | |
| /* Also update the input buffer, because unfortunately | |
| * the server-side ssl_parse_client_hello() reparses the | |
| * record header when receiving a ClientHello initiating | |
| * a renegotiation. */ | |
| ssl->in_hdr[0] = rec.type; | |
| ssl->in_msg = rec.buf + rec.data_offset; | |
| ssl->in_msglen = rec.data_len; | |
| MBEDTLS_PUT_UINT16_BE(rec.data_len, ssl->in_len, 0); | |
| return 0; | |
| } | |
| int mbedtls_ssl_handle_message_type(mbedtls_ssl_context *ssl) | |
| { | |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; | |
| /* | |
| * Handle particular types of records | |
| */ | |
| if (ssl->in_msgtype == MBEDTLS_SSL_MSG_HANDSHAKE) { | |
| if ((ret = mbedtls_ssl_prepare_handshake_record(ssl)) != 0) { | |
| return ret; | |
| } | |
| } | |
| if (ssl->in_msgtype == MBEDTLS_SSL_MSG_CHANGE_CIPHER_SPEC) { | |
| if (ssl->in_msglen != 1) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("invalid CCS message, len: %" MBEDTLS_PRINTF_SIZET, | |
| ssl->in_msglen)); | |
| return MBEDTLS_ERR_SSL_INVALID_RECORD; | |
| } | |
| if (ssl->in_msg[0] != 1) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("invalid CCS message, content: %02x", | |
| ssl->in_msg[0])); | |
| return MBEDTLS_ERR_SSL_INVALID_RECORD; | |
| } | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| if (ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM && | |
| ssl->state != MBEDTLS_SSL_CLIENT_CHANGE_CIPHER_SPEC && | |
| ssl->state != MBEDTLS_SSL_SERVER_CHANGE_CIPHER_SPEC) { | |
| if (ssl->handshake == NULL) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("dropping ChangeCipherSpec outside handshake")); | |
| return MBEDTLS_ERR_SSL_UNEXPECTED_RECORD; | |
| } | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("received out-of-order ChangeCipherSpec - remember")); | |
| return MBEDTLS_ERR_SSL_EARLY_MESSAGE; | |
| } | |
| #endif | |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_3) | |
| if (ssl->tls_version == MBEDTLS_SSL_VERSION_TLS1_3) { | |
| #if defined(MBEDTLS_SSL_TLS1_3_COMPATIBILITY_MODE) | |
| MBEDTLS_SSL_DEBUG_MSG(1, | |
| ("Ignore ChangeCipherSpec in TLS 1.3 compatibility mode")); | |
| return MBEDTLS_ERR_SSL_CONTINUE_PROCESSING; | |
| #else | |
| MBEDTLS_SSL_DEBUG_MSG(1, | |
| ("ChangeCipherSpec invalid in TLS 1.3 without compatibility mode")); | |
| return MBEDTLS_ERR_SSL_INVALID_RECORD; | |
| #endif /* MBEDTLS_SSL_TLS1_3_COMPATIBILITY_MODE */ | |
| } | |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_3 */ | |
| } | |
| if (ssl->in_msgtype == MBEDTLS_SSL_MSG_ALERT) { | |
| if (ssl->in_msglen != 2) { | |
| /* Note: Standard allows for more than one 2 byte alert | |
| to be packed in a single message, but Mbed TLS doesn't | |
| currently support this. */ | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("invalid alert message, len: %" MBEDTLS_PRINTF_SIZET, | |
| ssl->in_msglen)); | |
| return MBEDTLS_ERR_SSL_INVALID_RECORD; | |
| } | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("got an alert message, type: [%u:%u]", | |
| ssl->in_msg[0], ssl->in_msg[1])); | |
| /* | |
| * Ignore non-fatal alerts, except close_notify and no_renegotiation | |
| */ | |
| if (ssl->in_msg[0] == MBEDTLS_SSL_ALERT_LEVEL_FATAL) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("is a fatal alert message (msg %d)", | |
| ssl->in_msg[1])); | |
| return MBEDTLS_ERR_SSL_FATAL_ALERT_MESSAGE; | |
| } | |
| if (ssl->in_msg[0] == MBEDTLS_SSL_ALERT_LEVEL_WARNING && | |
| ssl->in_msg[1] == MBEDTLS_SSL_ALERT_MSG_CLOSE_NOTIFY) { | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("is a close notify message")); | |
| return MBEDTLS_ERR_SSL_PEER_CLOSE_NOTIFY; | |
| } | |
| #if defined(MBEDTLS_SSL_RENEGOTIATION_ENABLED) | |
| if (ssl->in_msg[0] == MBEDTLS_SSL_ALERT_LEVEL_WARNING && | |
| ssl->in_msg[1] == MBEDTLS_SSL_ALERT_MSG_NO_RENEGOTIATION) { | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("is a no renegotiation alert")); | |
| /* Will be handled when trying to parse ServerHello */ | |
| return 0; | |
| } | |
| #endif | |
| /* Silently ignore: fetch new message */ | |
| return MBEDTLS_ERR_SSL_NON_FATAL; | |
| } | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| if (ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM) { | |
| /* Drop unexpected ApplicationData records, | |
| * except at the beginning of renegotiations */ | |
| if (ssl->in_msgtype == MBEDTLS_SSL_MSG_APPLICATION_DATA && | |
| mbedtls_ssl_is_handshake_over(ssl) == 0 | |
| #if defined(MBEDTLS_SSL_RENEGOTIATION) | |
| && !(ssl->renego_status == MBEDTLS_SSL_RENEGOTIATION_IN_PROGRESS && | |
| ssl->state == MBEDTLS_SSL_SERVER_HELLO) | |
| #endif | |
| ) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("dropping unexpected ApplicationData")); | |
| return MBEDTLS_ERR_SSL_NON_FATAL; | |
| } | |
| if (ssl->handshake != NULL && | |
| mbedtls_ssl_is_handshake_over(ssl) == 1) { | |
| mbedtls_ssl_handshake_wrapup_free_hs_transform(ssl); | |
| } | |
| } | |
| #endif /* MBEDTLS_SSL_PROTO_DTLS */ | |
| return 0; | |
| } | |
| int mbedtls_ssl_send_fatal_handshake_failure(mbedtls_ssl_context *ssl) | |
| { | |
| return mbedtls_ssl_send_alert_message(ssl, | |
| MBEDTLS_SSL_ALERT_LEVEL_FATAL, | |
| MBEDTLS_SSL_ALERT_MSG_HANDSHAKE_FAILURE); | |
| } | |
| int mbedtls_ssl_send_alert_message(mbedtls_ssl_context *ssl, | |
| unsigned char level, | |
| unsigned char message) | |
| { | |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; | |
| if (ssl == NULL || ssl->conf == NULL) { | |
| return MBEDTLS_ERR_SSL_BAD_INPUT_DATA; | |
| } | |
| if (ssl->out_left != 0) { | |
| return mbedtls_ssl_flush_output(ssl); | |
| } | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("=> send alert message")); | |
| MBEDTLS_SSL_DEBUG_MSG(3, ("send alert level=%u message=%u", level, message)); | |
| ssl->out_msgtype = MBEDTLS_SSL_MSG_ALERT; | |
| ssl->out_msglen = 2; | |
| ssl->out_msg[0] = level; | |
| ssl->out_msg[1] = message; | |
| if ((ret = mbedtls_ssl_write_record(ssl, SSL_FORCE_FLUSH)) != 0) { | |
| MBEDTLS_SSL_DEBUG_RET(1, "mbedtls_ssl_write_record", ret); | |
| return ret; | |
| } | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("<= send alert message")); | |
| return 0; | |
| } | |
| int mbedtls_ssl_write_change_cipher_spec(mbedtls_ssl_context *ssl) | |
| { | |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("=> write change cipher spec")); | |
| ssl->out_msgtype = MBEDTLS_SSL_MSG_CHANGE_CIPHER_SPEC; | |
| ssl->out_msglen = 1; | |
| ssl->out_msg[0] = 1; | |
| ssl->state++; | |
| if ((ret = mbedtls_ssl_write_handshake_msg(ssl)) != 0) { | |
| MBEDTLS_SSL_DEBUG_RET(1, "mbedtls_ssl_write_handshake_msg", ret); | |
| return ret; | |
| } | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("<= write change cipher spec")); | |
| return 0; | |
| } | |
| int mbedtls_ssl_parse_change_cipher_spec(mbedtls_ssl_context *ssl) | |
| { | |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("=> parse change cipher spec")); | |
| if ((ret = mbedtls_ssl_read_record(ssl, 1)) != 0) { | |
| MBEDTLS_SSL_DEBUG_RET(1, "mbedtls_ssl_read_record", ret); | |
| return ret; | |
| } | |
| if (ssl->in_msgtype != MBEDTLS_SSL_MSG_CHANGE_CIPHER_SPEC) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("bad change cipher spec message")); | |
| mbedtls_ssl_send_alert_message(ssl, MBEDTLS_SSL_ALERT_LEVEL_FATAL, | |
| MBEDTLS_SSL_ALERT_MSG_UNEXPECTED_MESSAGE); | |
| return MBEDTLS_ERR_SSL_UNEXPECTED_MESSAGE; | |
| } | |
| /* CCS records are only accepted if they have length 1 and content '1', | |
| * so we don't need to check this here. */ | |
| /* | |
| * Switch to our negotiated transform and session parameters for inbound | |
| * data. | |
| */ | |
| MBEDTLS_SSL_DEBUG_MSG(3, ("switching to new transform spec for inbound data")); | |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_2) | |
| ssl->transform_in = ssl->transform_negotiate; | |
| #endif | |
| ssl->session_in = ssl->session_negotiate; | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| if (ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM) { | |
| #if defined(MBEDTLS_SSL_DTLS_ANTI_REPLAY) | |
| mbedtls_ssl_dtls_replay_reset(ssl); | |
| #endif | |
| /* Increment epoch */ | |
| if (++ssl->in_epoch == 0) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("DTLS epoch would wrap")); | |
| /* This is highly unlikely to happen for legitimate reasons, so | |
| treat it as an attack and don't send an alert. */ | |
| return MBEDTLS_ERR_SSL_COUNTER_WRAPPING; | |
| } | |
| } else | |
| #endif /* MBEDTLS_SSL_PROTO_DTLS */ | |
| memset(ssl->in_ctr, 0, MBEDTLS_SSL_SEQUENCE_NUMBER_LEN); | |
| mbedtls_ssl_update_in_pointers(ssl); | |
| ssl->state++; | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("<= parse change cipher spec")); | |
| return 0; | |
| } | |
| /* Once ssl->out_hdr as the address of the beginning of the | |
| * next outgoing record is set, deduce the other pointers. | |
| * | |
| * Note: For TLS, we save the implicit record sequence number | |
| * (entering MAC computation) in the 8 bytes before ssl->out_hdr, | |
| * and the caller has to make sure there's space for this. | |
| */ | |
| static size_t ssl_transform_get_explicit_iv_len( | |
| mbedtls_ssl_transform const *transform) | |
| { | |
| return transform->ivlen - transform->fixed_ivlen; | |
| } | |
| void mbedtls_ssl_update_out_pointers(mbedtls_ssl_context *ssl, | |
| mbedtls_ssl_transform *transform) | |
| { | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| if (ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM) { | |
| ssl->out_ctr = ssl->out_hdr + 3; | |
| #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) | |
| ssl->out_cid = ssl->out_ctr + MBEDTLS_SSL_SEQUENCE_NUMBER_LEN; | |
| ssl->out_len = ssl->out_cid; | |
| if (transform != NULL) { | |
| ssl->out_len += transform->out_cid_len; | |
| } | |
| #else /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ | |
| ssl->out_len = ssl->out_ctr + MBEDTLS_SSL_SEQUENCE_NUMBER_LEN; | |
| #endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ | |
| ssl->out_iv = ssl->out_len + 2; | |
| } else | |
| #endif | |
| { | |
| ssl->out_len = ssl->out_hdr + 3; | |
| #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) | |
| ssl->out_cid = ssl->out_len; | |
| #endif | |
| ssl->out_iv = ssl->out_hdr + 5; | |
| } | |
| ssl->out_msg = ssl->out_iv; | |
| /* Adjust out_msg to make space for explicit IV, if used. */ | |
| if (transform != NULL) { | |
| ssl->out_msg += ssl_transform_get_explicit_iv_len(transform); | |
| } | |
| } | |
| /* Once ssl->in_hdr as the address of the beginning of the | |
| * next incoming record is set, deduce the other pointers. | |
| * | |
| * Note: For TLS, we save the implicit record sequence number | |
| * (entering MAC computation) in the 8 bytes before ssl->in_hdr, | |
| * and the caller has to make sure there's space for this. | |
| */ | |
| void mbedtls_ssl_update_in_pointers(mbedtls_ssl_context *ssl) | |
| { | |
| /* This function sets the pointers to match the case | |
| * of unprotected TLS/DTLS records, with both ssl->in_iv | |
| * and ssl->in_msg pointing to the beginning of the record | |
| * content. | |
| * | |
| * When decrypting a protected record, ssl->in_msg | |
| * will be shifted to point to the beginning of the | |
| * record plaintext. | |
| */ | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| if (ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM) { | |
| /* This sets the header pointers to match records | |
| * without CID. When we receive a record containing | |
| * a CID, the fields are shifted accordingly in | |
| * ssl_parse_record_header(). */ | |
| ssl->in_ctr = ssl->in_hdr + 3; | |
| #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) | |
| ssl->in_cid = ssl->in_ctr + MBEDTLS_SSL_SEQUENCE_NUMBER_LEN; | |
| ssl->in_len = ssl->in_cid; /* Default: no CID */ | |
| #else /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ | |
| ssl->in_len = ssl->in_ctr + MBEDTLS_SSL_SEQUENCE_NUMBER_LEN; | |
| #endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ | |
| ssl->in_iv = ssl->in_len + 2; | |
| } else | |
| #endif | |
| { | |
| ssl->in_ctr = ssl->in_hdr - MBEDTLS_SSL_SEQUENCE_NUMBER_LEN; | |
| ssl->in_len = ssl->in_hdr + 3; | |
| #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) | |
| ssl->in_cid = ssl->in_len; | |
| #endif | |
| ssl->in_iv = ssl->in_hdr + 5; | |
| } | |
| /* This will be adjusted at record decryption time. */ | |
| ssl->in_msg = ssl->in_iv; | |
| } | |
| /* | |
| * Setup an SSL context | |
| */ | |
| void mbedtls_ssl_reset_in_out_pointers(mbedtls_ssl_context *ssl) | |
| { | |
| /* Set the incoming and outgoing record pointers. */ | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| if (ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM) { | |
| ssl->out_hdr = ssl->out_buf; | |
| ssl->in_hdr = ssl->in_buf; | |
| } else | |
| #endif /* MBEDTLS_SSL_PROTO_DTLS */ | |
| { | |
| ssl->out_ctr = ssl->out_buf; | |
| ssl->out_hdr = ssl->out_buf + 8; | |
| ssl->in_hdr = ssl->in_buf + 8; | |
| } | |
| /* Derive other internal pointers. */ | |
| mbedtls_ssl_update_out_pointers(ssl, NULL /* no transform enabled */); | |
| mbedtls_ssl_update_in_pointers(ssl); | |
| } | |
| /* | |
| * SSL get accessors | |
| */ | |
| size_t mbedtls_ssl_get_bytes_avail(const mbedtls_ssl_context *ssl) | |
| { | |
| return ssl->in_offt == NULL ? 0 : ssl->in_msglen; | |
| } | |
| int mbedtls_ssl_check_pending(const mbedtls_ssl_context *ssl) | |
| { | |
| /* | |
| * Case A: We're currently holding back | |
| * a message for further processing. | |
| */ | |
| if (ssl->keep_current_message == 1) { | |
| MBEDTLS_SSL_DEBUG_MSG(3, ("ssl_check_pending: record held back for processing")); | |
| return 1; | |
| } | |
| /* | |
| * Case B: Further records are pending in the current datagram. | |
| */ | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| if (ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM && | |
| ssl->in_left > ssl->next_record_offset) { | |
| MBEDTLS_SSL_DEBUG_MSG(3, ("ssl_check_pending: more records within current datagram")); | |
| return 1; | |
| } | |
| #endif /* MBEDTLS_SSL_PROTO_DTLS */ | |
| /* | |
| * Case C: A handshake message is being processed. | |
| */ | |
| if (ssl->in_hslen > 0 && ssl->in_hslen < ssl->in_msglen) { | |
| MBEDTLS_SSL_DEBUG_MSG(3, | |
| ("ssl_check_pending: more handshake messages within current record")); | |
| return 1; | |
| } | |
| /* | |
| * Case D: An application data message is being processed | |
| */ | |
| if (ssl->in_offt != NULL) { | |
| MBEDTLS_SSL_DEBUG_MSG(3, ("ssl_check_pending: application data record is being processed")); | |
| return 1; | |
| } | |
| /* | |
| * In all other cases, the rest of the message can be dropped. | |
| * As in ssl_get_next_record, this needs to be adapted if | |
| * we implement support for multiple alerts in single records. | |
| */ | |
| MBEDTLS_SSL_DEBUG_MSG(3, ("ssl_check_pending: nothing pending")); | |
| return 0; | |
| } | |
| int mbedtls_ssl_get_record_expansion(const mbedtls_ssl_context *ssl) | |
| { | |
| size_t transform_expansion = 0; | |
| const mbedtls_ssl_transform *transform = ssl->transform_out; | |
| unsigned block_size; | |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) | |
| psa_key_attributes_t attr = PSA_KEY_ATTRIBUTES_INIT; | |
| psa_key_type_t key_type; | |
| #endif /* MBEDTLS_USE_PSA_CRYPTO */ | |
| size_t out_hdr_len = mbedtls_ssl_out_hdr_len(ssl); | |
| if (transform == NULL) { | |
| return (int) out_hdr_len; | |
| } | |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) | |
| if (transform->psa_alg == PSA_ALG_GCM || | |
| transform->psa_alg == PSA_ALG_CCM || | |
| transform->psa_alg == PSA_ALG_AEAD_WITH_SHORTENED_TAG(PSA_ALG_CCM, 8) || | |
| transform->psa_alg == PSA_ALG_CHACHA20_POLY1305 || | |
| transform->psa_alg == MBEDTLS_SSL_NULL_CIPHER) { | |
| transform_expansion = transform->minlen; | |
| } else if (transform->psa_alg == PSA_ALG_CBC_NO_PADDING) { | |
| (void) psa_get_key_attributes(transform->psa_key_enc, &attr); | |
| key_type = psa_get_key_type(&attr); | |
| block_size = PSA_BLOCK_CIPHER_BLOCK_LENGTH(key_type); | |
| /* Expansion due to the addition of the MAC. */ | |
| transform_expansion += transform->maclen; | |
| /* Expansion due to the addition of CBC padding; | |
| * Theoretically up to 256 bytes, but we never use | |
| * more than the block size of the underlying cipher. */ | |
| transform_expansion += block_size; | |
| /* For TLS 1.2 or higher, an explicit IV is added | |
| * after the record header. */ | |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_2) | |
| transform_expansion += block_size; | |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_2 */ | |
| } else { | |
| MBEDTLS_SSL_DEBUG_MSG(1, | |
| ("Unsupported psa_alg spotted in mbedtls_ssl_get_record_expansion()")); | |
| return MBEDTLS_ERR_SSL_INTERNAL_ERROR; | |
| } | |
| #else | |
| switch (mbedtls_cipher_get_cipher_mode(&transform->cipher_ctx_enc)) { | |
| case MBEDTLS_MODE_GCM: | |
| case MBEDTLS_MODE_CCM: | |
| case MBEDTLS_MODE_CHACHAPOLY: | |
| case MBEDTLS_MODE_STREAM: | |
| transform_expansion = transform->minlen; | |
| break; | |
| case MBEDTLS_MODE_CBC: | |
| block_size = mbedtls_cipher_get_block_size( | |
| &transform->cipher_ctx_enc); | |
| /* Expansion due to the addition of the MAC. */ | |
| transform_expansion += transform->maclen; | |
| /* Expansion due to the addition of CBC padding; | |
| * Theoretically up to 256 bytes, but we never use | |
| * more than the block size of the underlying cipher. */ | |
| transform_expansion += block_size; | |
| /* For TLS 1.2 or higher, an explicit IV is added | |
| * after the record header. */ | |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_2) | |
| transform_expansion += block_size; | |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_2 */ | |
| break; | |
| default: | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("should never happen")); | |
| return MBEDTLS_ERR_SSL_INTERNAL_ERROR; | |
| } | |
| #endif /* MBEDTLS_USE_PSA_CRYPTO */ | |
| #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) | |
| if (transform->out_cid_len != 0) { | |
| transform_expansion += MBEDTLS_SSL_MAX_CID_EXPANSION; | |
| } | |
| #endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ | |
| return (int) (out_hdr_len + transform_expansion); | |
| } | |
| #if defined(MBEDTLS_SSL_RENEGOTIATION) | |
| /* | |
| * Check record counters and renegotiate if they're above the limit. | |
| */ | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_check_ctr_renegotiate(mbedtls_ssl_context *ssl) | |
| { | |
| size_t ep_len = mbedtls_ssl_ep_len(ssl); | |
| int in_ctr_cmp; | |
| int out_ctr_cmp; | |
| if (mbedtls_ssl_is_handshake_over(ssl) == 0 || | |
| ssl->renego_status == MBEDTLS_SSL_RENEGOTIATION_PENDING || | |
| ssl->conf->disable_renegotiation == MBEDTLS_SSL_RENEGOTIATION_DISABLED) { | |
| return 0; | |
| } | |
| in_ctr_cmp = memcmp(ssl->in_ctr + ep_len, | |
| &ssl->conf->renego_period[ep_len], | |
| MBEDTLS_SSL_SEQUENCE_NUMBER_LEN - ep_len); | |
| out_ctr_cmp = memcmp(&ssl->cur_out_ctr[ep_len], | |
| &ssl->conf->renego_period[ep_len], | |
| sizeof(ssl->cur_out_ctr) - ep_len); | |
| if (in_ctr_cmp <= 0 && out_ctr_cmp <= 0) { | |
| return 0; | |
| } | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("record counter limit reached: renegotiate")); | |
| return mbedtls_ssl_renegotiate(ssl); | |
| } | |
| #endif /* MBEDTLS_SSL_RENEGOTIATION */ | |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_3) | |
| #if defined(MBEDTLS_SSL_SESSION_TICKETS) && defined(MBEDTLS_SSL_CLI_C) | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_tls13_check_new_session_ticket(mbedtls_ssl_context *ssl) | |
| { | |
| if ((ssl->in_hslen == mbedtls_ssl_hs_hdr_len(ssl)) || | |
| (ssl->in_msg[0] != MBEDTLS_SSL_HS_NEW_SESSION_TICKET)) { | |
| return 0; | |
| } | |
| ssl->keep_current_message = 1; | |
| MBEDTLS_SSL_DEBUG_MSG(3, ("NewSessionTicket received")); | |
| mbedtls_ssl_handshake_set_state(ssl, | |
| MBEDTLS_SSL_TLS1_3_NEW_SESSION_TICKET); | |
| return MBEDTLS_ERR_SSL_WANT_READ; | |
| } | |
| #endif /* MBEDTLS_SSL_SESSION_TICKETS && MBEDTLS_SSL_CLI_C */ | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_tls13_handle_hs_message_post_handshake(mbedtls_ssl_context *ssl) | |
| { | |
| MBEDTLS_SSL_DEBUG_MSG(3, ("received post-handshake message")); | |
| #if defined(MBEDTLS_SSL_SESSION_TICKETS) && defined(MBEDTLS_SSL_CLI_C) | |
| if (ssl->conf->endpoint == MBEDTLS_SSL_IS_CLIENT) { | |
| int ret = ssl_tls13_check_new_session_ticket(ssl); | |
| if (ret != 0) { | |
| return ret; | |
| } | |
| } | |
| #endif /* MBEDTLS_SSL_SESSION_TICKETS && MBEDTLS_SSL_CLI_C */ | |
| /* Fail in all other cases. */ | |
| return MBEDTLS_ERR_SSL_UNEXPECTED_MESSAGE; | |
| } | |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_3 */ | |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_2) | |
| /* This function is called from mbedtls_ssl_read() when a handshake message is | |
| * received after the initial handshake. In this context, handshake messages | |
| * may only be sent for the purpose of initiating renegotiations. | |
| * | |
| * This function is introduced as a separate helper since the handling | |
| * of post-handshake handshake messages changes significantly in TLS 1.3, | |
| * and having a helper function allows to distinguish between TLS <= 1.2 and | |
| * TLS 1.3 in the future without bloating the logic of mbedtls_ssl_read(). | |
| */ | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_tls12_handle_hs_message_post_handshake(mbedtls_ssl_context *ssl) | |
| { | |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; | |
| /* | |
| * - For client-side, expect SERVER_HELLO_REQUEST. | |
| * - For server-side, expect CLIENT_HELLO. | |
| * - Fail (TLS) or silently drop record (DTLS) in other cases. | |
| */ | |
| #if defined(MBEDTLS_SSL_CLI_C) | |
| if (ssl->conf->endpoint == MBEDTLS_SSL_IS_CLIENT && | |
| (ssl->in_msg[0] != MBEDTLS_SSL_HS_HELLO_REQUEST || | |
| ssl->in_hslen != mbedtls_ssl_hs_hdr_len(ssl))) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("handshake received (not HelloRequest)")); | |
| /* With DTLS, drop the packet (probably from last handshake) */ | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| if (ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM) { | |
| return 0; | |
| } | |
| #endif | |
| return MBEDTLS_ERR_SSL_UNEXPECTED_MESSAGE; | |
| } | |
| #endif /* MBEDTLS_SSL_CLI_C */ | |
| #if defined(MBEDTLS_SSL_SRV_C) | |
| if (ssl->conf->endpoint == MBEDTLS_SSL_IS_SERVER && | |
| ssl->in_msg[0] != MBEDTLS_SSL_HS_CLIENT_HELLO) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("handshake received (not ClientHello)")); | |
| /* With DTLS, drop the packet (probably from last handshake) */ | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| if (ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM) { | |
| return 0; | |
| } | |
| #endif | |
| return MBEDTLS_ERR_SSL_UNEXPECTED_MESSAGE; | |
| } | |
| #endif /* MBEDTLS_SSL_SRV_C */ | |
| #if defined(MBEDTLS_SSL_RENEGOTIATION) | |
| /* Determine whether renegotiation attempt should be accepted */ | |
| if (!(ssl->conf->disable_renegotiation == MBEDTLS_SSL_RENEGOTIATION_DISABLED || | |
| (ssl->secure_renegotiation == MBEDTLS_SSL_LEGACY_RENEGOTIATION && | |
| ssl->conf->allow_legacy_renegotiation == | |
| MBEDTLS_SSL_LEGACY_NO_RENEGOTIATION))) { | |
| /* | |
| * Accept renegotiation request | |
| */ | |
| /* DTLS clients need to know renego is server-initiated */ | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| if (ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM && | |
| ssl->conf->endpoint == MBEDTLS_SSL_IS_CLIENT) { | |
| ssl->renego_status = MBEDTLS_SSL_RENEGOTIATION_PENDING; | |
| } | |
| #endif | |
| ret = mbedtls_ssl_start_renegotiation(ssl); | |
| if (ret != MBEDTLS_ERR_SSL_WAITING_SERVER_HELLO_RENEGO && | |
| ret != 0) { | |
| MBEDTLS_SSL_DEBUG_RET(1, "mbedtls_ssl_start_renegotiation", | |
| ret); | |
| return ret; | |
| } | |
| } else | |
| #endif /* MBEDTLS_SSL_RENEGOTIATION */ | |
| { | |
| /* | |
| * Refuse renegotiation | |
| */ | |
| MBEDTLS_SSL_DEBUG_MSG(3, ("refusing renegotiation, sending alert")); | |
| if ((ret = mbedtls_ssl_send_alert_message(ssl, | |
| MBEDTLS_SSL_ALERT_LEVEL_WARNING, | |
| MBEDTLS_SSL_ALERT_MSG_NO_RENEGOTIATION)) != 0) { | |
| return ret; | |
| } | |
| } | |
| return 0; | |
| } | |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_2 */ | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_handle_hs_message_post_handshake(mbedtls_ssl_context *ssl) | |
| { | |
| /* Check protocol version and dispatch accordingly. */ | |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_3) | |
| if (ssl->tls_version == MBEDTLS_SSL_VERSION_TLS1_3) { | |
| return ssl_tls13_handle_hs_message_post_handshake(ssl); | |
| } | |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_3 */ | |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_2) | |
| if (ssl->tls_version <= MBEDTLS_SSL_VERSION_TLS1_2) { | |
| return ssl_tls12_handle_hs_message_post_handshake(ssl); | |
| } | |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_2 */ | |
| /* Should never happen */ | |
| return MBEDTLS_ERR_SSL_INTERNAL_ERROR; | |
| } | |
| /* | |
| * Receive application data decrypted from the SSL layer | |
| */ | |
| int mbedtls_ssl_read(mbedtls_ssl_context *ssl, unsigned char *buf, size_t len) | |
| { | |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; | |
| size_t n; | |
| if (ssl == NULL || ssl->conf == NULL) { | |
| return MBEDTLS_ERR_SSL_BAD_INPUT_DATA; | |
| } | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("=> read")); | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| if (ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM) { | |
| if ((ret = mbedtls_ssl_flush_output(ssl)) != 0) { | |
| return ret; | |
| } | |
| if (ssl->handshake != NULL && | |
| ssl->handshake->retransmit_state == MBEDTLS_SSL_RETRANS_SENDING) { | |
| if ((ret = mbedtls_ssl_flight_transmit(ssl)) != 0) { | |
| return ret; | |
| } | |
| } | |
| } | |
| #endif | |
| /* | |
| * Check if renegotiation is necessary and/or handshake is | |
| * in process. If yes, perform/continue, and fall through | |
| * if an unexpected packet is received while the client | |
| * is waiting for the ServerHello. | |
| * | |
| * (There is no equivalent to the last condition on | |
| * the server-side as it is not treated as within | |
| * a handshake while waiting for the ClientHello | |
| * after a renegotiation request.) | |
| */ | |
| #if defined(MBEDTLS_SSL_RENEGOTIATION) | |
| ret = ssl_check_ctr_renegotiate(ssl); | |
| if (ret != MBEDTLS_ERR_SSL_WAITING_SERVER_HELLO_RENEGO && | |
| ret != 0) { | |
| MBEDTLS_SSL_DEBUG_RET(1, "ssl_check_ctr_renegotiate", ret); | |
| return ret; | |
| } | |
| #endif | |
| if (ssl->state != MBEDTLS_SSL_HANDSHAKE_OVER) { | |
| ret = mbedtls_ssl_handshake(ssl); | |
| if (ret != MBEDTLS_ERR_SSL_WAITING_SERVER_HELLO_RENEGO && | |
| ret != 0) { | |
| MBEDTLS_SSL_DEBUG_RET(1, "mbedtls_ssl_handshake", ret); | |
| return ret; | |
| } | |
| } | |
| /* Loop as long as no application data record is available */ | |
| while (ssl->in_offt == NULL) { | |
| /* Start timer if not already running */ | |
| if (ssl->f_get_timer != NULL && | |
| ssl->f_get_timer(ssl->p_timer) == -1) { | |
| mbedtls_ssl_set_timer(ssl, ssl->conf->read_timeout); | |
| } | |
| if ((ret = mbedtls_ssl_read_record(ssl, 1)) != 0) { | |
| if (ret == MBEDTLS_ERR_SSL_CONN_EOF) { | |
| return 0; | |
| } | |
| MBEDTLS_SSL_DEBUG_RET(1, "mbedtls_ssl_read_record", ret); | |
| return ret; | |
| } | |
| if (ssl->in_msglen == 0 && | |
| ssl->in_msgtype == MBEDTLS_SSL_MSG_APPLICATION_DATA) { | |
| /* | |
| * OpenSSL sends empty messages to randomize the IV | |
| */ | |
| if ((ret = mbedtls_ssl_read_record(ssl, 1)) != 0) { | |
| if (ret == MBEDTLS_ERR_SSL_CONN_EOF) { | |
| return 0; | |
| } | |
| MBEDTLS_SSL_DEBUG_RET(1, "mbedtls_ssl_read_record", ret); | |
| return ret; | |
| } | |
| } | |
| if (ssl->in_msgtype == MBEDTLS_SSL_MSG_HANDSHAKE) { | |
| ret = ssl_handle_hs_message_post_handshake(ssl); | |
| if (ret != 0) { | |
| MBEDTLS_SSL_DEBUG_RET(1, "ssl_handle_hs_message_post_handshake", | |
| ret); | |
| return ret; | |
| } | |
| /* At this point, we don't know whether the renegotiation triggered | |
| * by the post-handshake message has been completed or not. The cases | |
| * to consider are the following: | |
| * 1) The renegotiation is complete. In this case, no new record | |
| * has been read yet. | |
| * 2) The renegotiation is incomplete because the client received | |
| * an application data record while awaiting the ServerHello. | |
| * 3) The renegotiation is incomplete because the client received | |
| * a non-handshake, non-application data message while awaiting | |
| * the ServerHello. | |
| * | |
| * In each of these cases, looping will be the proper action: | |
| * - For 1), the next iteration will read a new record and check | |
| * if it's application data. | |
| * - For 2), the loop condition isn't satisfied as application data | |
| * is present, hence continue is the same as break | |
| * - For 3), the loop condition is satisfied and read_record | |
| * will re-deliver the message that was held back by the client | |
| * when expecting the ServerHello. | |
| */ | |
| continue; | |
| } | |
| #if defined(MBEDTLS_SSL_RENEGOTIATION) | |
| else if (ssl->renego_status == MBEDTLS_SSL_RENEGOTIATION_PENDING) { | |
| if (ssl->conf->renego_max_records >= 0) { | |
| if (++ssl->renego_records_seen > ssl->conf->renego_max_records) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("renegotiation requested, " | |
| "but not honored by client")); | |
| return MBEDTLS_ERR_SSL_UNEXPECTED_MESSAGE; | |
| } | |
| } | |
| } | |
| #endif /* MBEDTLS_SSL_RENEGOTIATION */ | |
| /* Fatal and closure alerts handled by mbedtls_ssl_read_record() */ | |
| if (ssl->in_msgtype == MBEDTLS_SSL_MSG_ALERT) { | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("ignoring non-fatal non-closure alert")); | |
| return MBEDTLS_ERR_SSL_WANT_READ; | |
| } | |
| if (ssl->in_msgtype != MBEDTLS_SSL_MSG_APPLICATION_DATA) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("bad application data message")); | |
| return MBEDTLS_ERR_SSL_UNEXPECTED_MESSAGE; | |
| } | |
| ssl->in_offt = ssl->in_msg; | |
| /* We're going to return something now, cancel timer, | |
| * except if handshake (renegotiation) is in progress */ | |
| if (mbedtls_ssl_is_handshake_over(ssl) == 1) { | |
| mbedtls_ssl_set_timer(ssl, 0); | |
| } | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| /* If we requested renego but received AppData, resend HelloRequest. | |
| * Do it now, after setting in_offt, to avoid taking this branch | |
| * again if ssl_write_hello_request() returns WANT_WRITE */ | |
| #if defined(MBEDTLS_SSL_SRV_C) && defined(MBEDTLS_SSL_RENEGOTIATION) | |
| if (ssl->conf->endpoint == MBEDTLS_SSL_IS_SERVER && | |
| ssl->renego_status == MBEDTLS_SSL_RENEGOTIATION_PENDING) { | |
| if ((ret = mbedtls_ssl_resend_hello_request(ssl)) != 0) { | |
| MBEDTLS_SSL_DEBUG_RET(1, "mbedtls_ssl_resend_hello_request", | |
| ret); | |
| return ret; | |
| } | |
| } | |
| #endif /* MBEDTLS_SSL_SRV_C && MBEDTLS_SSL_RENEGOTIATION */ | |
| #endif /* MBEDTLS_SSL_PROTO_DTLS */ | |
| } | |
| n = (len < ssl->in_msglen) | |
| ? len : ssl->in_msglen; | |
| if (len != 0) { | |
| memcpy(buf, ssl->in_offt, n); | |
| ssl->in_msglen -= n; | |
| } | |
| /* Zeroising the plaintext buffer to erase unused application data | |
| from the memory. */ | |
| mbedtls_platform_zeroize(ssl->in_offt, n); | |
| if (ssl->in_msglen == 0) { | |
| /* all bytes consumed */ | |
| ssl->in_offt = NULL; | |
| ssl->keep_current_message = 0; | |
| } else { | |
| /* more data available */ | |
| ssl->in_offt += n; | |
| } | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("<= read")); | |
| return (int) n; | |
| } | |
| /* | |
| * Send application data to be encrypted by the SSL layer, taking care of max | |
| * fragment length and buffer size. | |
| * | |
| * According to RFC 5246 Section 6.2.1: | |
| * | |
| * Zero-length fragments of Application data MAY be sent as they are | |
| * potentially useful as a traffic analysis countermeasure. | |
| * | |
| * Therefore, it is possible that the input message length is 0 and the | |
| * corresponding return code is 0 on success. | |
| */ | |
| MBEDTLS_CHECK_RETURN_CRITICAL | |
| static int ssl_write_real(mbedtls_ssl_context *ssl, | |
| const unsigned char *buf, size_t len) | |
| { | |
| int ret = mbedtls_ssl_get_max_out_record_payload(ssl); | |
| const size_t max_len = (size_t) ret; | |
| if (ret < 0) { | |
| MBEDTLS_SSL_DEBUG_RET(1, "mbedtls_ssl_get_max_out_record_payload", ret); | |
| return ret; | |
| } | |
| if (len > max_len) { | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| if (ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM) { | |
| MBEDTLS_SSL_DEBUG_MSG(1, ("fragment larger than the (negotiated) " | |
| "maximum fragment length: %" MBEDTLS_PRINTF_SIZET | |
| " > %" MBEDTLS_PRINTF_SIZET, | |
| len, max_len)); | |
| return MBEDTLS_ERR_SSL_BAD_INPUT_DATA; | |
| } else | |
| #endif | |
| len = max_len; | |
| } | |
| if (ssl->out_left != 0) { | |
| /* | |
| * The user has previously tried to send the data and | |
| * MBEDTLS_ERR_SSL_WANT_WRITE or the message was only partially | |
| * written. In this case, we expect the high-level write function | |
| * (e.g. mbedtls_ssl_write()) to be called with the same parameters | |
| */ | |
| if ((ret = mbedtls_ssl_flush_output(ssl)) != 0) { | |
| MBEDTLS_SSL_DEBUG_RET(1, "mbedtls_ssl_flush_output", ret); | |
| return ret; | |
| } | |
| } else { | |
| /* | |
| * The user is trying to send a message the first time, so we need to | |
| * copy the data into the internal buffers and setup the data structure | |
| * to keep track of partial writes | |
| */ | |
| ssl->out_msglen = len; | |
| ssl->out_msgtype = MBEDTLS_SSL_MSG_APPLICATION_DATA; | |
| if (len > 0) { | |
| memcpy(ssl->out_msg, buf, len); | |
| } | |
| if ((ret = mbedtls_ssl_write_record(ssl, SSL_FORCE_FLUSH)) != 0) { | |
| MBEDTLS_SSL_DEBUG_RET(1, "mbedtls_ssl_write_record", ret); | |
| return ret; | |
| } | |
| } | |
| return (int) len; | |
| } | |
| /* | |
| * Write application data (public-facing wrapper) | |
| */ | |
| int mbedtls_ssl_write(mbedtls_ssl_context *ssl, const unsigned char *buf, size_t len) | |
| { | |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("=> write")); | |
| if (ssl == NULL || ssl->conf == NULL) { | |
| return MBEDTLS_ERR_SSL_BAD_INPUT_DATA; | |
| } | |
| #if defined(MBEDTLS_SSL_RENEGOTIATION) | |
| if ((ret = ssl_check_ctr_renegotiate(ssl)) != 0) { | |
| MBEDTLS_SSL_DEBUG_RET(1, "ssl_check_ctr_renegotiate", ret); | |
| return ret; | |
| } | |
| #endif | |
| if (ssl->state != MBEDTLS_SSL_HANDSHAKE_OVER) { | |
| if ((ret = mbedtls_ssl_handshake(ssl)) != 0) { | |
| MBEDTLS_SSL_DEBUG_RET(1, "mbedtls_ssl_handshake", ret); | |
| return ret; | |
| } | |
| } | |
| ret = ssl_write_real(ssl, buf, len); | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("<= write")); | |
| return ret; | |
| } | |
| /* | |
| * Notify the peer that the connection is being closed | |
| */ | |
| int mbedtls_ssl_close_notify(mbedtls_ssl_context *ssl) | |
| { | |
| int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; | |
| if (ssl == NULL || ssl->conf == NULL) { | |
| return MBEDTLS_ERR_SSL_BAD_INPUT_DATA; | |
| } | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("=> write close notify")); | |
| if (mbedtls_ssl_is_handshake_over(ssl) == 1) { | |
| if ((ret = mbedtls_ssl_send_alert_message(ssl, | |
| MBEDTLS_SSL_ALERT_LEVEL_WARNING, | |
| MBEDTLS_SSL_ALERT_MSG_CLOSE_NOTIFY)) != 0) { | |
| MBEDTLS_SSL_DEBUG_RET(1, "mbedtls_ssl_send_alert_message", ret); | |
| return ret; | |
| } | |
| } | |
| MBEDTLS_SSL_DEBUG_MSG(2, ("<= write close notify")); | |
| return 0; | |
| } | |
| void mbedtls_ssl_transform_free(mbedtls_ssl_transform *transform) | |
| { | |
| if (transform == NULL) { | |
| return; | |
| } | |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) | |
| psa_destroy_key(transform->psa_key_enc); | |
| psa_destroy_key(transform->psa_key_dec); | |
| #else | |
| mbedtls_cipher_free(&transform->cipher_ctx_enc); | |
| mbedtls_cipher_free(&transform->cipher_ctx_dec); | |
| #endif /* MBEDTLS_USE_PSA_CRYPTO */ | |
| #if defined(MBEDTLS_SSL_SOME_SUITES_USE_MAC) | |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) | |
| psa_destroy_key(transform->psa_mac_enc); | |
| psa_destroy_key(transform->psa_mac_dec); | |
| #else | |
| mbedtls_md_free(&transform->md_ctx_enc); | |
| mbedtls_md_free(&transform->md_ctx_dec); | |
| #endif /* MBEDTLS_USE_PSA_CRYPTO */ | |
| #endif | |
| mbedtls_platform_zeroize(transform, sizeof(mbedtls_ssl_transform)); | |
| } | |
| void mbedtls_ssl_set_inbound_transform(mbedtls_ssl_context *ssl, | |
| mbedtls_ssl_transform *transform) | |
| { | |
| ssl->transform_in = transform; | |
| memset(ssl->in_ctr, 0, MBEDTLS_SSL_SEQUENCE_NUMBER_LEN); | |
| } | |
| void mbedtls_ssl_set_outbound_transform(mbedtls_ssl_context *ssl, | |
| mbedtls_ssl_transform *transform) | |
| { | |
| ssl->transform_out = transform; | |
| memset(ssl->cur_out_ctr, 0, sizeof(ssl->cur_out_ctr)); | |
| } | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| void mbedtls_ssl_buffering_free(mbedtls_ssl_context *ssl) | |
| { | |
| unsigned offset; | |
| mbedtls_ssl_handshake_params * const hs = ssl->handshake; | |
| if (hs == NULL) { | |
| return; | |
| } | |
| ssl_free_buffered_record(ssl); | |
| for (offset = 0; offset < MBEDTLS_SSL_MAX_BUFFERED_HS; offset++) { | |
| ssl_buffering_free_slot(ssl, offset); | |
| } | |
| } | |
| static void ssl_buffering_free_slot(mbedtls_ssl_context *ssl, | |
| uint8_t slot) | |
| { | |
| mbedtls_ssl_handshake_params * const hs = ssl->handshake; | |
| mbedtls_ssl_hs_buffer * const hs_buf = &hs->buffering.hs[slot]; | |
| if (slot >= MBEDTLS_SSL_MAX_BUFFERED_HS) { | |
| return; | |
| } | |
| if (hs_buf->is_valid == 1) { | |
| hs->buffering.total_bytes_buffered -= hs_buf->data_len; | |
| mbedtls_zeroize_and_free(hs_buf->data, hs_buf->data_len); | |
| memset(hs_buf, 0, sizeof(mbedtls_ssl_hs_buffer)); | |
| } | |
| } | |
| #endif /* MBEDTLS_SSL_PROTO_DTLS */ | |
| /* | |
| * Convert version numbers to/from wire format | |
| * and, for DTLS, to/from TLS equivalent. | |
| * | |
| * For TLS this is the identity. | |
| * For DTLS, map as follows, then use 1's complement (v -> ~v): | |
| * 1.x <-> 3.x+1 for x != 0 (DTLS 1.2 based on TLS 1.2) | |
| * DTLS 1.0 is stored as TLS 1.1 internally | |
| */ | |
| void mbedtls_ssl_write_version(unsigned char version[2], int transport, | |
| mbedtls_ssl_protocol_version tls_version) | |
| { | |
| uint16_t tls_version_formatted; | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| if (transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM) { | |
| tls_version_formatted = | |
| ~(tls_version - (tls_version == 0x0302 ? 0x0202 : 0x0201)); | |
| } else | |
| #else | |
| ((void) transport); | |
| #endif | |
| { | |
| tls_version_formatted = (uint16_t) tls_version; | |
| } | |
| MBEDTLS_PUT_UINT16_BE(tls_version_formatted, version, 0); | |
| } | |
| uint16_t mbedtls_ssl_read_version(const unsigned char version[2], | |
| int transport) | |
| { | |
| uint16_t tls_version = MBEDTLS_GET_UINT16_BE(version, 0); | |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) | |
| if (transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM) { | |
| tls_version = | |
| ~(tls_version - (tls_version == 0xfeff ? 0x0202 : 0x0201)); | |
| } | |
| #else | |
| ((void) transport); | |
| #endif | |
| return tls_version; | |
| } | |
| /* | |
| * Send pending fatal alert. | |
| * 0, No alert message. | |
| * !0, if mbedtls_ssl_send_alert_message() returned in error, the error code it | |
| * returned, ssl->alert_reason otherwise. | |
| */ | |
| int mbedtls_ssl_handle_pending_alert(mbedtls_ssl_context *ssl) | |
| { | |
| int ret; | |
| /* No pending alert, return success*/ | |
| if (ssl->send_alert == 0) { | |
| return 0; | |
| } | |
| ret = mbedtls_ssl_send_alert_message(ssl, | |
| MBEDTLS_SSL_ALERT_LEVEL_FATAL, | |
| ssl->alert_type); | |
| /* If mbedtls_ssl_send_alert_message() returned with MBEDTLS_ERR_SSL_WANT_WRITE, | |
| * do not clear the alert to be able to send it later. | |
| */ | |
| if (ret != MBEDTLS_ERR_SSL_WANT_WRITE) { | |
| ssl->send_alert = 0; | |
| } | |
| if (ret != 0) { | |
| return ret; | |
| } | |
| return ssl->alert_reason; | |
| } | |
| /* | |
| * Set pending fatal alert flag. | |
| */ | |
| void mbedtls_ssl_pend_fatal_alert(mbedtls_ssl_context *ssl, | |
| unsigned char alert_type, | |
| int alert_reason) | |
| { | |
| ssl->send_alert = 1; | |
| ssl->alert_type = alert_type; | |
| ssl->alert_reason = alert_reason; | |
| } | |
| #endif /* MBEDTLS_SSL_TLS_C */ |